SERS aptasensor for simultaneous detection of ochratoxin A and zearalenone utilizing a rigid enhanced substrate (ITO/AuNPs/GO) combined with Au@AgNPs.

The contamination of mycotoxins poses a serious threat to global food security, hence the urgent need for simultaneous detection of multiple mycotoxins. Herein, two SERS nanoprobes were synthesized by embedded SERS tags (4-mercaptopyridine, 4MPy; 4-mercaptobenzonitrile, TBN) into the Au and Ag core-shell structure, and each was coupled with the aptamers specific to ochratoxin A (OTA) and zearalenone (ZEN). Meanwhile, a rigid enhanced substrate Indium tin oxide glass/AuNPs/Graphene oxide (ITO/AuNPs/GO) was combined with aptamer functionalized Au@AgNPs via π-π stacking interactions between the aptamer and GO to construct a surface-enhanced Raman spectroscopy (SERS) aptasensor, thereby inducing a SERS enhancement effect for the effective and swift simultaneous detection of both OTA and ZEN. The presence of OTA and ZEN caused signal probes dissociation, resulting in an inverse correlation between Raman signal intensity (1005 cm-1 and 2227 cm-1) and the concentrations of OTA and ZEN, respectively. The SERS aptasensor exhibited wide linear detection ranges of 0.001-20 ng/mL for OTA and 0.1-100 ng/mL for ZEN, with low detection limits (LOD) of 0.94 pg/mL for OTA and 59 pg/mL for ZEN. Furthermore, the developed SERS aptasensor demonstrated feasible applicability in the detection of OTA and ZEN in maize, showcasing its substantial potential for practical implementation.

Understanding Macrophage Interaction with Antimony-Doped Tin Oxide Plasmonic Nanoparticles.

Antimony-doped tin oxide nanoparticles (ATO NPs) have emerged as a promising tool in biomedical applications, namely robust photothermal effects upon near-infrared (NIR) light exposure, enabling controlled thermal dynamics to induce spatial cell death. This study investigated the interplay between ATO NPs and macrophages, understanding cellular uptake and cytokine release. ATO NPs demonstrated biocompatibility with no impact on macrophage viability and cytokine secretion. These findings highlight the potential of ATO NPs for inducing targeted cell death in cancer treatments, leveraging their feasibility, unique NIR properties, and safe interactions with immune cells. ATO NPs offer a transformative platform with significant potential for future biomedical applications by combining photothermal capabilities and biocompatibility.

Single-Atom Au-Functionalized Mesoporous SnO2 Nanospheres for Ultrasensitive Detection of Listeria monocytogenes Biomarker at Low Temperatures.

Semiconductor metal oxide gas sensors have been proven to be capable of detecting Listeria monocytogenes, one kind of foodborne bacteria, through monitoring the characteristic gaseous metabolic product 3-hydroxy-2-butanone. However, the detection still faces challenges because the sensors need to work at high temperatures and output limited gas sensing performance. The present study focuses on the design of single-atom Au-functionalized mesoporous SnO2 nanospheres for the sensitive detection of ppb-level 3-hydroxy-2-butanone at low temperatures (50 °C). The fabricated sensors exhibit high sensitivity (291.5 ppm-1), excellent selectivity, short response time (10 s), and ultralow detection limit (10 ppb). The gas sensors exhibit exceptional efficacy in distinguishing L. monocytogenes from other bacterial strains (e.g., Escherichia coli). Additionally, wireless detection of 3-hydroxy-2-butanone vapor is successfully achieved through microelectromechanical systems sensors, enabling real-time monitoring of the biomarker 3-hydroxy-2-butanone. The superior sensing performance is ascribed to the mesoporous framework with accessible active Au-O-Sn sites in the uniform sensing layer consisting of single-atom Au-modified mesoporous SnO2 nanospheres, and such a feature facilitates the gas diffusion, adsorption, and catalytic conversion of 3-hydroxy-2-butanone molecules in the sensing layer, resulting in excellent sensing signal output at relatively low temperature that is favorable for developing low-energy-consumption gas sensors.

Development of a SnO2-based 44Ti/44Sc generator for medical applications.

Towards application of 44Sc for diagnostic nuclear medicine, a 44Ti/44Sc generator based on an inorganic resin has been evaluated. Unlike other radionuclide generators used for medical applications, the long-term retention of the parent 44Ti is vital due to its long half life. Herein, tin dioxide (SnO2), a robust inorganic-based resin, has been synthesized and used as the stationary phase for a 44Ti/44Sc generator. The sorption behavior of 44Ti/44Sc was tested on SnO2 with varying acids, concentrations, and times. Preliminary batch study results showed >88 % 44Ti retention to the resin at lower acid concentrations (0.05 M HNO3 and 0.05 M HCl). A pilot generator was evaluated for a year, demonstrating 85.3 ± 2.8 % 44Sc elution yields and 0.71 ± 0.14 % 44Ti breakthrough in 5 M HNO3. Based on capacity studies, a 7.4 MBq (200 µCi) upscaled generator system was constructed for further evaluation of the SnO2 resin stability and the efficacy of the eluted 44Sc for radiolabeling. 44Sc could be regularly eluted from this generator in 5 M HNO3 with an overall average radiochemical yield 84.7 ± 9.5 %. Post-elution processing of the 44Sc with DGA-normal resin removed all 44Ti present and allowed for high 44Sc-DOTA labeling yields of 94.2 ± 0.5 %. Overall, SnO2 has been shown to be a viable material for a 44Ti/44Sc generator.

Antenna effect enhanced ECL immunoassay using microfloral europium porphyrin coordination polymers based on Eu3+ and TCPP for the detection of chloramphenicol in foods.

The "antenna effect" is one of the most important energy transfer modes in lanthanide light-emitting polymers. In this study, novel luminescent nanostructured coordination polymers (Eu-PCP) were synthesized in one step using Eu3+ as the central metal ion and 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) as the organic ligand. The unique "antenna effect" observed between Eu3+ and TCPP leads to a substantial improvement in the electrochemiluminescence (ECL) emission efficiency. Eu-PCP exhibits good cathodic ECL characteristics. Additionally, Au@SnS2 nanosheets exhibit favorable electrical conductivity, biocompatibility, and a significant specific surface area. This makes them a suitable choice as substrate materials for the modification of electrode surfaces and capturing antigens. Being well known, the development of sensitive and rapid methods to detect chloramphenicol is essential for food safety. Based on this, we report a novel competitive electrochemiluminescence immunoassay to achieve ultra-sensitive and highly specific detection of chloramphenicol. The linear range was 0.0002-500 ng mL-1 and the detection limit was 0.09 pg mL-1. Apart from that, the experimental results proved that it provided a new analytical tool for the detection of antibiotic residues in food safety.

Silver diamine fluoride in preventing enamel erosion: An in vitro study with salivary pellicle.

OBJECTIVES: To compare the prevention of enamel erosion and discolouring effect with a single and two weekly topical applications of silver diamine fluoride (SDF) solution. METHODS: Human enamel blocks were divided into four groups. Group 1 (SDF2) received two weekly applications of SDF solution (Advantage Arrest: 260,000 ppm Ag, 44,300 ppm F, pH 9.1). Group 2 (SDF1) received a single application of SDF solution. Group 3 (SNF, Positive Control) received daily application of stannous-chloride/amine-fluoride/sodium-fluoride solution (Elmex® Enamel professional: 800 ppm Sn(II), 500 ppm F, pH 4.5). Group 4 (DW, Negative Control) received daily application of deionised water. The treated blocks were subjected to a 14-day erosive challenge. Crystal characteristics, elemental composition, surface morphology, percentage of surface microhardness loss (%SMHL), surface loss, and total colour change (ΔE) of the blocks were investigated using X-ray diffraction (XRD), energy-dispersive spectrometry (EDS) and scanning electron microscopy (SEM), Vickers' hardness testing, non-contact profilometry, and digital spectrophotometry, respectively. RESULTS: XRD and EDS revealed precipitates of silver for SDF2 and SDF1 and tin for SNF. SEM showed prominent etched enamel pattern on DW than the other three groups. The%SMHL (%) of SDF2, SDF1, SNF, and DW were 26.6 ± 2.9, 33.6 ± 2.8, 38.9 ± 2.9, and 50.5 ± 2.8 (SDF2SDF1=SNF>DW, p < 0.05). CONCLUSION: Two weekly applications was more effective than a single application of SDF in preventing enamel erosion, though it caused more discolouration. CLINICAL SIGNIFICANCE: Topical application of 38 % SDF with two weekly applications protocol is effective in preventing enamel erosion.

Establishing Healthy Breath Baselines With Tin Oxide Sensors: Fundamental Building Blocks for Noninvasive Health Monitoring.

INTRODUCTION: Volatile organic compounds (VOCs) in breath serve as a source of biomarkers for medical conditions relevant to warfighter health including Corona Virus Disease and other potential biological threats. Electronic noses are integrated arrays of gas sensors that are cost-effective and miniaturized devices that rapidly respond to VOCs in exhaled breath. The current study seeks to qualify healthy breath baselines of exhaled VOC profiles through analysis using a commercialized array of metal oxide (MOX) sensors. MATERIALS AND METHODS: Subjects were recruited/consented through word of mouth and using posters. For each sample, breath was analyzed using an array of MOX sensors with parameters that were previously established. Data were also collected using a lifestyle questionnaire and from a blood test to assess markers of general health. Sensor data were processed using a feature extraction algorithm, which were analyzed through statistical approaches to identify correlations with confounding factors. Reproducibility was also assessed through relative standard deviation values of sensor features within a single subject and between different volunteers. RESULTS: A total of 164 breath samples were collected from different individuals, and 10 of these volunteers provided an additional 9 samples over 6 months for the longitudinal study. First, data from different subjects were analyzed, and the trends of the 17 extracted features were elucidated. This revealed not only a high degree of correlation between sensors within the array but also between some of the features extracted within a single sensor. This helped guide the removal of multicollinear features for multivariate statistical analyses. No correlations were identified between sensor features and confounding factors of interest (age, body mass index, smoking, and sex) after P-value adjustment, indicating that these variables have an insignificant impact on the observed sensor signal. Finally, the longitudinal replicates were analyzed, and reproducibility assessment showed that the variability between subjects was significantly higher than within replicates of a single volunteer (P-value = .002). Multivariate analyses within the longitudinal data displayed that subjects could not be distinguished from one another, indicating that there may be a universal healthy breath baseline that is not specific to particular individuals. CONCLUSIONS: The current study sought to qualify healthy baselines of VOCs in exhaled breath using a MOX sensor array that can be leveraged in the future to detect medical conditions relevant to warfighter health. For example, the results of the study will be useful, as the healthy breath VOC data from the sensor array can be cross-referenced in future studies aiming to use the device to distinguish disease states. Ultimately, the sensors may be integrated into a portable breathalyzer or current military gear to increase warfighter readiness through rapid and noninvasive health monitoring.

Ultrathin Film Antimony-Doped Tin Oxide Prevents [NiFe] Hydrogenase Inactivation at High Electrode Potentials.

For hydrogenases to serve as effective electrocatalysts in hydrogen biotechnological devices, such as enzymatic fuel cells, it is imperative to design electrodes that facilitate stable and functional enzyme immobilization, efficient substrate accessibility, and effective interfacial electron transfer. Recent years have seen considerable advancements in this area, particularly concerning hydrogenases. However, a significant limitation remains: the inactivation of hydrogenases at high oxidative potentials across most developed electrodes. Addressing this issue necessitates a thorough understanding of the interactions between the enzyme and the electrode surface. In this study, we employ ATR-IR spectroscopy combined with electrochemistry in situ to investigate the interaction mechanisms, electrocatalytic behavior, and stability of the oxygen-tolerant membrane-bound [NiFe] hydrogenase from Cupriavidus necator (MBH), which features a His-tag on its small subunit C-terminus. Antimony-doped tin oxide (ATO) thin films were selected as electrodes due to their protein compatibility, suitable potential window, conductivity, and transparency, making them an ideal platform for spectroelectrochemical measurements. Our comprehensive examination of the physiological and electrochemical processes of [NiFe] MBH on ATO thin film electrodes demonstrates that by tuning the electron transport properties of the ATO thin film, we can prevent MBH inactivation at extended oxidative potentials while maintaining direct electron transfer between the enzyme and the electrode.

Eco-Friendly Biomemristive Nonvolatile Memory: Harnessing Organic Waste for Sustainable Technology.

Organic material-based bioelectronic nonvolatile memory devices have recently received a lot of attention due to their environmental compatibility, simple fabrication recipe, preferred scalability, low cost, low power consumption, and numerous additional advantages. Resistive random-access memory (RRAM) devices work on the principle of resistive switching, which has the potential for applications in memory storage and neuromorphic computing. Here, natural organically grown orange peel was used to extract biocompatible pectin to design a resistive switching-based memory device of the structure Ag/Pectin/Indium tin oxide (ITO), and the behavior was studied between a temperature range of 10K and 300K. The microscopic characterization revealed the texture of the surface and thickness of the layers. The memristive current-voltage characteristics performed over 1000 consecutive cycles of repeated switching revealed sustainable bipolar resistive switching behavior with a high ON/OFF ratio. The underlying principle of Resistive Switching behavior is based on the formation of conductive filaments between the electrodes, which is explained in this work. Further, we have also designed a 2 × 2 crossbar array of RRAM devices to demonstrate various logic circuit operations useful for neuromorphic computing. The robust switching characteristics suggest possible uses of such devices for the design of ecofriendly bioelectronic memory applications and in-memory computing.

Stabilized Hf-doped Ti/Sb-SnO2 electrode for efficient degradation of tetracycline.

The electrochemical advanced oxidation process (EAOP) has shown significant promise in the field of refractory organic wastewater treatment due to its high efficiency and environmentally friendly nature. In this study, Ti/Sb-SnO2 electrodes with varying proportions of Hf were prepared using the sol-gel method. The addition of Hf transformed the original collapsing and broken surface into a flat and regular surface. The results demonstrated that Ti/Sb-SnO2-Hf electrode doped with 6% Hf exhibited a higher oxygen evolution potential (OEP) and excellent stability. The OEP increased from 2.315 V without Hf-doping to 2.482 V, and the corresponding actual life was 321.05% higher than that without Hf. The current density (5-40 mA·cm-2), electrolyte concentration (0.02-0.2 mol·L-1), pH (3-11), and initial pollutant concentration (5-80 mg·L-1) were evaluated to confirm the tetracycline (TC) degradation characterization of Ti/Sb-SnO2-6%Hf electrodes. It was concluded that under the optimal degradation conditions, the removal rate of TC could reach 99.66% within 2 h. The degradation of TC follows first-order reaction kinetics. The oxidative degradation of TC was achieved through indirect oxidation, with ·OH playing a dominant role. TC's electrochemical oxidation degradation pathway has been proposed: Based on LC-MS results, three main pathways are speculated. During the electrocatalytic oxidation process, decarboxylation, deamidation, and ring-opening reactions occur under ·OH attack, producing intermediate compounds with m/z values of 427, 433, 350, 246, 461, 424, 330, 352, 309, 263, and 233. These intermediates are further oxidized to intermediate compounds with an m/z value of 218. This work introduces a new efficient anode electrochemical catalyst for the degradation of TC, providing a strategy for industrial applications.

Sulfur-Vacancy-Engineered Two-Dimensional Cu@SnS2-x Nanosheets Constructed via Heterovalent Substitution for High-Efficiency Piezocatalytic Tumor Therapy.

Ultrasound (US)-mediated piezocatalytic tumor therapy has attracted much attention due to its notable tissue-penetration capabilities, noninvasiveness, and low oxygen dependency. Nevertheless, the efficiency of piezocatalytic therapy is limited due to an inadequate piezoelectric response, low separation of electron-hole (e--h+) pairs, and complex tumor microenvironment (TME). Herein, an ultrathin two-dimensional (2D) sulfur-vacancy-engineered (Sv-engineered) Cu@SnS2-x nanosheet (NS) with an enhanced piezoelectric effect was constructed via the heterovalent substitution strategy of Sn4+ by Cu2+. The introduction of Cu2+ ion not only causes changes in the crystal structure to increase polarization but also generates rich Sv to decrease band gap from 2.16 to 1.62 eV and inhibit e--h+ pairs recombination, collectively leading to the highly efficient generation of reactive oxygen species under US irradiation. Moreover, Cu@SnS2-x shows US-enhanced TME-responsive Fenton-like catalytic activity and glutathione depletion ability, further aggravating the oxidative stress. Both in vitro and in vivo results prove that the Sv-engineered Cu@SnS2-x NSs can significantly kill tumor cells and achieve high-efficiency piezocatalytic tumor therapy in a biocompatible manner. Overall, this study provides a new avenue for sonocatalytic therapy and broadens the application of 2D piezoelectric materials.

Physical vapour deposition fabrication of MoO3-based photoanode for water splitting to generate hydrogen.

MoO3 thin film was fabricated on an indium tin oxide substrate using the physical vapor deposition technique. X-ray diffraction and scanning electron microscopy study to investigate surface morphology, grain size, and surface structure, which are critical for absorbing solar spectra in water splitting for hydrogen energy generation. Ultraviolet-visible spectroscopy was used to confirm the absorption of solar spectra and the percentage of transmittance. Fourier-transform infrared analysis provided the functional groups present in the deposited thin film. The Tauc plot was used to determine the thin-film band gap, which allowed for the analysis of charge carrier transitions from the conduction band to the valence band. Electrochemical impedance spectroscopy investigations confirmed the charge transfer processes to the counter electrode and electrolyte interfaces. The observed low curve for MoO3 indicated low resistance and allowed efficient charge transfer. Linear sweep voltammetry analysis was used to measure photocurrent and solar light to hydrogen emission when the thin film was exposed to solar spectra. The thin film's observed hydrogen emission rate was 3731.74 mol g-1 h-1, and the STH% of MoO3 was found to be 0.345% at 0.8 V. These findings highlight the promising potential of MoO3 as a material for hydrogen energy generation using solar light.

Photoelectrochemical/Colorimetric Dual-Mode Specific Detection of Staphylococcus aureus Based on the Enzymatic Reaction Triggered by Catalase from Lysed Bacteria.

Staphylococcus aureus (S. aureus) is abundant in nature and frequently leads to various health issues. Bacteriophages as obligate intracellular parasites of bacteria have the ability to specifically identify and infect S. aureus, causing bacterial lysis and the release of endogenous catalase (CAT). The released CAT triggers the conversion of H2O2 into O2 and H2O, resulting in a notable decrease in UV absorption at 570 nm and a concurrent surge in photocurrent. On the basis of this, a photoelectrochemical/colorimetric dual-mode biosensor for the detection of S. aureus was developed. In the photoelectric detection mode, the reactions involving endogenous enzymes occur directly in the solution, requiring only the simple drop-coating of TiO2@CdS onto the indium tin oxide (ITO) electrode surface. There was no need for immobilizing additional biomolecules, thereby significantly minimizing nonspecific adsorption and improving the biosensor's stability and reproducibility. For colorimetry, we utilized a cost-effective and operationally simple approach based on KI and starch. Remarkably, this photoelectrochemical/colorimetry exhibited a linear range of 102-109 CFU/mL for S. aureus, achieving detection limits of 7 and 10 CFU/mL, respectively. Herein, phage identification ensures the specific detection of live S. aureus, thereby effectively mitigating the potential for false signals. The dual-signal readout mode improves the detection accuracy and reliability. In conclusion, this present method offers numerous advantages, including simplicity, time-efficiency, cost-effectiveness, high specificity, and therefore excellent accuracy.

Electrical Responsive Coating with a Multilayered TiO2-SnO2-RuO2 Heterostructure on Ti for Controlling Antibacterial Ability and Improving Osseointegration.

The bacterial infection and poor osseointegration of Ti implants could significantly compromise their applications in bone repair and replacement. Based on the carrier separation ability of the heterojunction and the redox reaction of pseudocapacitive metal oxides, we report an electrically responsive TiO2-SnO2-RuO2 coating with a multilayered heterostructure on a Ti implant. Owing to the band gap structure of the TiO2-SnO2-RuO2 coating, electron carriers are easily enriched at the coating surface, enabling a response to the endogenous electrical stimulation of the bone. With the formation of SnO2-RuO2 pseudocapacitance on the modified surface, the postcharging mode can significantly change the surface chemical state of the coating due to the redox reaction, enhancing the antibacterial ability and osteogenesis-related gene expression of the human bone marrow mesenchymal stem cells. Owing to the attraction for Ca2+, only the negatively postcharged SnO2@RuO2 can promote apatite deposition. The in vivo experiment reveals that the S-SnO2@RuO2-NP could effectively kill the bacteria colonized on the surface and promote osseointegration with the synostosis bonding interface. Thus, negatively charging the electrically responsive coating of TiO2-SnO2-RuO2 is a good strategy to endow modified Ti implants with excellent antibacterial ability and osseointegration.

Experimental toothpastes containing ß-TCP nanoparticles functionalized with fluoride and tin to prevent Erosive Tooth Wear.

OBJECTIVES: The present study aimed to synthesize toothpastes containing Beta- TriCalcium Phosphate (ß-TCP) nanoparticles, functionalized with fluoride and tin, and test their ability to reduce erosive tooth wear (ETW). METHODS: Toothpastes were synthesized with the following active ingredients: 1100 ppm of fluoride (as sodium fluoride, F-), 3500 ppm of tin (as stannous chloride, Sn2+), and 800 ppm of ß-TCP (Sizes a - 20 nm; and b - 100 nm). Enamel specimens were randomly assigned into the following groups (n = 10): 1. Commercial toothpaste; 2. Placebo; 3 F-; 4. F- + ß-TCPa; 5. F- + ß-TCPb; 6. F- + Sn2+; 7. F- + Sn2+ + ß-TCPa and 8. F- + Sn2+ + ß-TCPb. Specimens were subjected to erosion-abrasion cycling. Surface loss (in µm) was measured by optical profilometry. Toothpastes pH and available F- were also assessed. RESULTS: Brushing with placebo toothpaste resulted in higher surface loss than brushing with F- (p = 0.005) and F- + ß-TCPb (p = 0.007); however, there was no difference between F- and F- + ß-TCPb (p = 1.00). Commercial toothpaste showed no difference from Placebo (p = 0.279). The groups F-, F- + ß-TCPa, F- + ß-TCPb, F- + Sn2+, F- + Sn2+ + ß-TCPa and F- + Sn2+ + ß-TCPb were not different from the commercial toothpaste (p > 0.05). Overall, the addition of ß-TCP reduced the amount of available fluoride in the experimental toothpastes. The pH of toothpastes ranged from 4.97 to 6.49. CONCLUSIONS: Although toothpaste containing ß-TCP nanoparticles protected enamel against dental erosion-abrasion, this effect was not superior to the standard fluoride toothpaste (commercial). In addition, the functionalization of ß-TCP nanoparticles with fluoride and tin did not enhance their protective effect. CLINICAL SIGNIFICANCE: Although ß-TCP nanoparticles have some potential to control Erosive Tooth Wear, their incorporation into an experimental toothpaste appears to have a protective effect that is similar to a commercial fluoride toothpaste.

Modulating temperature for Cu2ZnSnS4 (CZTS) synthesis via hot injection method and studying the photocatalytic efficiencies for the degradation of rhodamine 6G and methylene blue pollutants.

Cu2ZnSnS4 (CZTS) was synthesized following hot injection method and the process was optimized by varying temperature conditions. Four samples at different temperatures viz., 200, 250, 300 and 350 °C were prepared and analyzed using different characterization techniques. Based on the correlation between XRD, Raman and XPS, we conclude that the formation of ZnS and SnS2 occurs at 350 °C but at 200 °C there is no breakdown of the complex as per XRD. According to Raman and XPS analysis, as the temperature rises, the bonds between the metals become weaker, which is visibly seen in Raman and XPS due to the minor peaks of copper sulfide. Scanning electron microscopic analysis confirmed nanometric particles which increase in size with temperature. The photocatalytic evaluation showed that CZTS synthesized at 200 °C performed efficiently in the removal of the two colorants, methylene blue and Rhodamine 6G, achieving 92.80% and 90.65%, respectively. The photocatalytic degradation efficiencies decreased at higher temperatures due to bigger sized CZTS particles as confirmed by SEM results. Computational simulations confirm that CZTS has a highly negative energy -25,764 Ry, confirming its structural stability and higher covalent than ionic character.

Room temperature detection of aspergillus flavus volatile organic compounds (VOCs) under simulated conditions using graphene oxide and tin oxide Nanorods (SnO2 NRs-GO).

This study investigated the application of a hybrid nanocomposite of tin oxide nanorods (SnO2 NRs) and graphene oxide (GO) for the chemoresistive detection of some volatile compounds (hexanal, benzaldehyde, octanal, 1-octanol, and ethyl acetate vapours) emitted by Aspergillus flavus under simulated conditions. The synthesised materials were characterised using various analytical techniques, including high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, and Fourier transform infrared spectroscopy (FTIR). Three sensors were fabricated: individual nanomaterials (i.e., SnO2 and GO) and composites (SnO2-GO). The results showed that SnO2 NRs had limited sensitivity as a sensor, while GO-based sensors responded to various analyte vapours. However, the incorporation of SnO2 NRs into GO layers resulted in synergistic effects and improved sensor performance. The sensors' sensitivity, selectivity, recovery, and response times were quantitatively determined from the sensors' response curves. The nanocomposite sensor demonstrated superior sensitivity and selectivity for analyte vapours with acceptable response and recovery times. In addition, the sensor was insensitive to humidity and showed robust performance up to 62% RH, although sensor drift occurred at 70% RH. This study highlights the promising potential of using SnO2 NRs-GO composite-based sensor for sensitive and selective detection of analyte vapours, which has significant implications for food safety and environmental monitoring applications.

Riboflavin-induced photo-ATRP electrochemical strategy for detection of biomarker trypsin.

The detection of trypsin and its inhibitors is important for both clinical diagnosis and disease treatment. Abnormal trypsin activity affects pancreatic function and leads to corresponding pathological changes in the body. Therefore, the study presented a riboflavin-induced photo-ATRP electrochemical assay of trypsin activity and its inhibitor, including detection of trypsin activity in real urine samples. Experiments were performed on indium tin oxide (ITO) electrodes modified with sulfhydryl groups of 3-mercaptopropionic acid, and target trypsin-specific cleavage of BSA-Au nanocluster (BSA-Au NCs) was followed by the modification of Au NCs to the electrodes using Au-S. The Au NCs immobilized monodeoxy-monomercapto-ß-cyclodextrin@adamantan-2-amine (SH-ß-CD@2-NH2-Ada) host-guest inclusion complexes to the electrode surfaces via Au-S. In a two-component photo-initiator system consisting of riboflavin as an initiator and ascorbic acid (AA) as a mild reducing agent under mild blue light radiation, a large number of electroactive substances were grafted onto the electrode surface to generate electrochemical signals. In addition, we have successfully realized the detection of clinical drug inhibitors of trypsin. The detection limit of the system is as low as 0.0024 ng/mL, which much littler than the average standard of trypsin in the patient's urine or serum. It's worth noting that this work will provide researchers with a different route to design electrochemical sensors based on non-covalent recognition strategies.

Photoelectrochemical immunoassay of cardiac troponin I based on ZnTCPP/CdIn2S4 type-II heterojunction and co-catalyzed precipitation biolabeling.

CdIn2S4 and zinc tetrakis(4-carboxyphenyl)porphyrin (ZnTCPP) were synthesized by hydrothermal method, and an organic dye-sensitized inorganic semiconductor ZnTCPP/CdIn2S4 type II heterojunction was constructed on a fluorine-doped tin oxide (FTO) substrate electrode. A sandwich immunostructure for signal-attenuation photoelectrochemical (PEC) detection of cardiac troponin I (cTnI) was constructed using the ZnTCPP/CdIn2S4/FTO photoanode and a horseradish peroxidase (HRP)-ZnFe2O4-Ab2-bovine serum albumin (BSA) immunolabeling complex. The bioenzyme HRP and the HRP-like nanozyme ZnFe2O4 can co-catalyze the oxidation of 4-chloro-1-naphthol (4-CN) by H2O2 to produce an insoluble precipitate on the photoanode, thus notably reducing the anodic photocurrent for quantitative determination of cTnI. Under the optimal conditions, the photocurrent at 0 V vs. SCE in 0.1 M phosphate buffer solution (pH 7.40) containing 0.1 M ascorbic acid was linear with the logarithm of cTnI concentration from 500 fg mL-1 to 50.0 ng mL-1, and the limit of detection (LOD, S/N = 3) is 0.15 pg mL-1. Spiked recoveries were 95.1% ~ 104% for assay of cTnI in human serum samples.

A competitive-type photoelectrochemical aptasensor for 17 beta-estradiol detection in microfluidic devices based on a novel Au@Cd:SnO2/SnS2 nanocomposite.

A competitive-type photoelectrochemical (PEC) aptasensor coupled with a novel Au@Cd:SnO2/SnS2 nanocomposite was designed for the detection of 17ß-estradiol (E2) in microfluidic devices. The designed Au@Cd:SnO2/SnS2 nanocomposites exhibit high photoelectrochemical activity owing to the good matching of cascade band-edge and the efficient separation of photo-generated e-/h+ pairs derived from the Cd-doped defects in the energy level. The Au@Cd:SnO2/SnS2 nanocomposites were loaded into carbon paste electrodes (CPEs) to immobilize complementary DNA (cDNA) and estradiol aptamer probe DNA (E2-Apt), forming a double-strand DNA structure on the CPE surface. As the target E2 interacts with the double-strand DNA, E2-Apt is sensitively released from the CPE, subsequently increasing the photocurrent intensity due to the reduced steric hindrance of the electrode surface. The competitive-type sensing mechanism, combined with high PEC activity of the Au@Cd:SnO2/SnS2 nanocomposites, contributed to the rapid and sensitive detection of E2 in a "signal on" manner. Under the optimized conditions, the PEC aptasensor exhibited a linear range from 1.0 × 10-13 mol L-1 to 3.2 × 10-6 mol L-1 and a detection limit of 1.2 × 10-14 mol L-1 (S/N = 3). Moreover, the integration of microfluidic device with smartphone controlled portable electrochemical workstation enables the on-site detection of E2. The small sample volume (10 µL) and short analysis time (40 min) demonstrated the great potential of this strategy for E2 detection in rat serum and river water. With these advantages, the PEC aptasensor can be utilized for point-of-care testing (POCT) in both clinical and environmental applications.