Synthesis of δ-MnO2 via ozonation routine for low temperature formaldehyde removal.

Nowadays, it is still a challenge to prepared high efficiency and low cost formaldehyde (HCHO) removal catalysts in order to tackle the long-living indoor air pollution. Herein, δ-MnO2 is successfully synthesized by a facile ozonation strategy, where Mn2+ is oxidized by ozone (O3) bubble in an alkaline solution. It presents one of the best catalytic properties with a low 100% conversion temperature of 85°C for 50 ppm of HCHO under a GHSV of 48,000 mL/(g·hr). As a comparison, more than 6 times far longer oxidation time is needed if O3 is replaced by O2. Characterizations show that ozonation process generates a different intermediate of tetragonal ß-HMnO2, which would favor the quick transformation into the final product δ-MnO2, as compared with the relatively more thermodynamically stable monoclinic γ-HMnO2 in the O2 process. Finally, HCHO is found to be decomposed into CO2 via formate, dioxymethylene and carbonate species as identified by room temperature in-situ diffuse reflectance infrared fourier transform spectroscopy. All these results show great potency of this facile ozonation routine for the highly active δ-MnO2 synthesis in order to remove the HCHO contamination.

Ultrasonic humidifier aerosols: Observed high heavy metal enrichment and a new emission control method.

Ultrasonic humidifiers are commonly used in households to maintain indoor humidity and generate a large number of droplets or spray aerosols. However, there have been various health concerns associated with humidifier use, largely due to aerosols generated during operation. Here, we investigated the size distribution, chemical composition, and charged fraction of aerosol particles emitted from commercial ultrasonic humidifiers. Heavy metals in water used for humidifiers were found to be highly enriched in the ultrasonic humidifier aerosols (UHA), with the enrichment factors ranging from 102 to 107. This enrichment may pose health concerns for the building occupants, as UHA concentrations of up to 106 particles/cm3 or 3 mg/m3 were observed. Furthermore, approximately 90% of UHA were observed to be electrically charged, for the first time according to our knowledge. Based on this discovery, we proposed and tested a new method to remove UHA by using a simple electrical field. The designed electrical field in this work can efficiently remove 81.4% of UHA. Therefore, applying this electrical field could be an effective method to significantly reduce the health risks by UHA.

Intermittent low-dose far-UVC irradiation inhibits growth of common mold below threshold limit value.

Mold infestations in buildings pose significant challenges to human health, affecting both private residences and hospitals. While molds commonly trigger asthma and allergies in the immunocompetent, they can cause life-threatening diseases in the immunocompromised. Currently, there is an unmet need for new strategies to reduce or prevent mold infestations. Far-UVC technology can inactivate microorganisms while remaining safe for humans. This study investigates the inhibitory efficacy of far-UVC light at 222 nm on the growth of common mold-producing fungi, specifically Penicillium candidum, when delivered in low-dose on-off duty cycles, a configuration consistent with its use in real-world settings. The inhibitory effect of the low-dose duty cycles was assessed on growth induced by i) an adjacent spore-producing P. candidum donor and ii) P. candidum spores seeded directly onto agar plates. In both setups, the far-UVC light significantly inhibited both vertical and horizontal growth of P. candidum, even when the UV doses were below the Threshold Value Limit of 23 mJ/cm2. These results suggest that far-UVC light holds the potential to improve indoor air quality by reducing or preventing mold growth, also when people are present.

Impact of secondhand smoke on air quality in partially enclosed outdoor hospitality venues: a review.

BACKGROUND: Smoking is a leading cause of premature mortality and morbidity globally. The pollutants generated from smoke are not only harmful to smokers, but also to those exposed to secondhand smoke. As a result of increasingly restrictive indoor smoke-free policies in many countries, there is a tendency for tobacco smoking to move outdoors into partially enclosed settings in hospitality venues. The aim of this systematic review was to evaluate the impact of secondhand smoke on air quality in outdoor hospitality venues. METHODS: Two electronic databases PubMed and Scopus were searched from 1 January 2010 to 30 June 2022 for studies of air quality impacts from tobacco smoking in outdoor hospitality venues. A total of 625 studies were screened and 13 studies were included in this review. RESULTS: The majority (9 studies) of reviewed studies monitored PM2.5 concentration as an indicator of secondhand smoke. PM2.5 was reported from 10.9 µg/m3 to 91.0 µg/m3 in outdoor smoking areas, compared to 4.0 µg/m3 to 20.4 µg/m3 in outdoor control sites unaffected by smoking. Secondhand smoke can also drift into adjacent outdoor areas or infiltrate into indoor environments thus affecting air quality in spaces where smoking is not permitted. CONCLUSIONS: The reviewed studies indicated that air quality within outdoor hospitality venues where smoking is permitted is unlikely to meet current World Health Organization (WHO) ambient air quality guidelines for PM2.5. Customers and staff in outdoor hospitality venues with active smoking, and in adjacent outdoor and indoor non-smoking areas, are potentially exposed to secondhand smoke at levels exceeding WHO guidelines. Stronger smoking control policies are recommended for outdoor hospitality venues to protect the health of customers and staff from harmful secondhand smoke exposure. PROSPERO REGISTRATION: CRD42022342417.

Evaluating the effect of passive cooling strategies in school buildings on children's well-being in Barcelona: A quasi-experimental, mixed methods study.

Passive cooling strategies were implemented in 11 school buildings in Barcelona within a pilot project to improve thermal conditions. The present study aimed to evaluate the intervention's impact on students' comfort and well-being at school. A quasi-experimental pre-post study based on mixed methods was conducted. Quantitative data were collected through self-reported questionnaires administrated to sixth-grade students in 21 schools (11 in an intervention group, IG, and 10 in a comparison group, CG). The authors measured changes in satisfaction with indoor temperature and indoor air quality (IAQ), the presence of bothering factors (temperature too high, temperature too low, unpleasant odours, and lighting problems), and students' well-being and performance. Difference-in-difference analysis was conducted to evaluate differences between the IG and CG in pre-post changes. Qualitative data were collected through photovoice-based sessions (59 sixth grade students) and interviews (7 teachers) in the IG. A thematic content analysis identified three main categories: changes in perceptions of indoor environmental conditions, indoor environment-related health and well-being, and indoor environment and their reported impact on learning. Quantitative findings show positive changes among the IG in perceived indoor temperature, air quality, and well-being at school, while suggest no significant changes in perceptions of temperature too low, lighting problems, and students' performance, in relation to the CG. Compared to the CG, students in the IG perceiving temperature too high significantly decreased among girls, while unpleasant odours decreased only among boys. In the qualitative assessment, participants reported that school transformations improved their indoor thermal and visual comfort, IAQ, and unpleasant odours. Participants also reported a reduction of fatigue, stress, irritability, and stifling sensation, as well as enhanced concentration. This study highlights the benefits of school passive design for student's comfort and well-being in Mediterranean climates and suggests the need to extend these interventions to other school buildings in similar contexts.

Lessons from the COVID-19 pandemic for ventilation and indoor air quality.

The rapid global spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) at the beginning of 2020 presented the world with its greatest health challenge in decades. It soon became clear that governments were unprepared to respond appropriately to this crisis. National and international public health authorities were confused about the transmission routes of the virus and the control measures required to protect against it. In particular, the need to reduce the risk of infection through sufficient and effective ventilation of indoor spaces was given little attention. In this review, we discuss insights and key lessons learned from the COVID-19 pandemic regarding the role of ventilation as an effective means against airborne transmission of pathogens and, more broadly, for supporting good indoor air quality.

Analysis of radon mitigation methods: 10-year review.

Exposure to the radon gas within a building can result in an increased risk of lung cancer. To minimise the health risk, indoor radon concentrations can be reduced using well-established mitigation methods. The performance of various radon reduction methods, their combination as well as other factors that can impact the efficiency of radon mitigation, were analysed using data collected from approximately 2800 dwellings that had installed radon mitigation techniques during the period 2007-2017. As demonstrated previously (Hodgson 2011), active methods are the most effective at reducing high concentrations of radon to below the Action and Target Levels (200 Bq m-3and 100 Bq m-3respectively). Reduction factors of up to 5.5 using single active methods and 8.3 using a combination of active methods were estimated in this study. For indoor radon levels greater than 1 000 Bq m-3, the Active Sump remained the most efficient technique, with the Active Underfloor Ventilation being the second most effective method. Passive methods alone or in combination with other passive methods offered moderate reductions at high radon concentration. Of the passive methods, Underfloor Ventilation was found to have the highest performance with a reduction factor of 1.8. The conclusions of this study should be used to update guidance for stakeholders including householders, contractors, radon awareness campaigns and the UKradon.org website.

The impact of renovation on the air quality in the stadium, and prevention of indoor air pollution.

Indoor air quality is a critical factor influencing athletic performance, particularly in professional sports settings, yet its impact remains underexplored. This study utilizes a panel dataset from 2516 Chinese Basketball Association (CBA) matches across 20 cities in China between 2014 and 2019. We integrate daily air pollution metrics with player efficiency ratings (PER) to investigate the effects of air quality on individual performance. We find that a 10% increase in the air quality index (AQI) corresponds to a 1.4223 decrease in PER, indicating a strong negative effect of poor air quality on player productivity. Different pollutants have varying effects, with some exacerbating the decline in both overall performance and precision in tasks. Notably, older players and international players exhibit greater resilience to air pollution. These insights contribute to the development of a comprehensive index for assessing work efficiency under varying air quality conditions and suggest targeted strategies to mitigate the negative impacts of air pollution in competitive athletic settings.

Ventilation and Public Health: A Fraught History.

Since the beginning of the COVID-19 pandemic, a vigorous public health discussion has arisen over indoor air quality and ventilation. In popular press articles, bestselling books, and the US Environmental Protection Agency's recently announced Clean Air in Buildings Challenge, scholars and policy experts have claimed that improved ventilation systems can lead to better productivity and performance. By reevaluating those claims in light of the history of public health in Great Britain and the United States, we found that better ventilation has frequently been proposed as a cost-effective and nonintrusive means of improving health in institutions experiencing structural and environmental public health problems. Furthermore, our examination of efforts to provide ventilation for enslaved people, incarcerated people, and the urban poor revealed a consistent lack of government regulation and a disassociation of air quality concerns from broader environmental, social, and economic realities. By continuing to ignore these broader contexts, current ventilation efforts risk repeating this pattern. (Am J Public Health. 2024;114(8):798-804. https://doi.org/10.2105/AJPH.2024.307670).

The BC Radon Data Repository (BCRDR) and BC Radon Map: Integrating disparate data sources for improved public health communication.

SETTING: The potential for exposure to indoor radon varies dramatically across British Columbia (BC) due to varied geology. Individuals may struggle to understand their exposure risk and agencies may struggle to understand the value of population-level programs and policies to mitigate risk. INTERVENTION: The BC Centre for Disease Control (BCCDC) established the BC Radon Data Repository (BCRDR) to facilitate radon research, public awareness, and action in the province. The BCRDR aggregates indoor radon measurements collected by government agencies, industry professionals and organizations, and research and advocacy groups. Participation was formalized with a data sharing agreement, which outlines how the BCCDC anonymizes and manages the shared data integrated into the BCRDR. OUTCOMES: The BCRDR currently holds 38,733 measurements from 18 data contributors. The repository continues to grow with new measurements from existing contributors and the addition of new contributors. A prominent use of the BCRDR was to create the online, interactive BC Radon Map, which includes regional concentration summaries, risk interpretation messaging, and health promotion information. Anonymized BCRDR data are also available for external release upon request. IMPLICATIONS: The BCCDC leverages existing radon measurement programs to create a large and integrated database with wide geographic coverage. The development and application of the BCRDR informs public health research and action beyond the BCCDC, and the repository can serve as a model for other regional or national initiatives.

RéSUMé: LIEU: Le potentiel d'exposition au radon à l'intérieur des bâtiments varie beaucoup d'une région à l'autre de la Colombie-Britannique en raison de la géologie variée. Les particuliers peuvent avoir du mal à comprendre leur risque d'exposition, et les organismes, à comprendre l'utilité des programmes et des politiques populationnels pour atténuer le risque. INTERVENTION: Le BC Centre for Disease Control (« le Centre ¼) a créé un organe d'archivage, le BC Radon Data Repository (BCRDR), pour faciliter la recherche, l'information, la sensibilisation du public et l'action liées au radon dans la province. Le BCRDR totalise les relevés du radon à l'intérieur des bâtiments pris par les organismes gouvernementaux, les professionnels et les organismes de l'industrie, ainsi que les groupes de recherche et de revendication. La participation est officialisée par un accord de partage de données qui décrit comment le Centre anonymise et gère les données communes du BCRDR. RéSULTATS: Le BCRDR contient actuellement 38 733 relevés de 18 contributeurs de données. Il continue de croître, avec de nouveaux relevés venant de contributeurs existants et l'ajout de nouveaux contributeurs. Il a servi, entre autres, à créer une carte du radon interactive en ligne pour la Colombie-Britannique, avec des résumés des concentrations régionales, des messages d'interprétation du risque et des informations de promotion de la santé. Sur demande, les données anonymisées du BCRDR sont également disponibles pour diffusion externe. CONSéQUENCES: Le Centre a exploité les programmes de prise de relevés du radon existants pour créer une grande base de données intégrée ayant une vaste couverture géographique. Le développement et les applications du BCRDR éclairent la recherche et l'action en santé publique au-delà du Centre, et l'organe d'archivage peut servir de modèle pour d'autres initiatives régionales ou nationales.

Evaluation of photocatalysis inactivation in indoor air purification of pathogenic microbes by using the different nanomaterials based on TiO2 nanomaterials.

The photocatalytic technology for indoor air disinfection has been broadly studied in the last decade. Selecting proper photocatalysts with high disinfection efficiency remains to be a challenge. By doping with the incorporation of metals, the bandgap can be narrowed while avoiding the recombination of photogenerated charge. Three photocatalysts (Ag-TiO2, MnO2-TiO2, and MnS2-TiO2) were tested in photocatalytic sterilization process. The results revealed that Ag-TiO2 had the best antibacterial performance. Within 20 min, the concentration of Serratia marcescens (the tested bacteria) decreased log number of ln 4.04 under 640 w/m2 light intensity with 1000 µg/mL of Ag-TiO2. During the process of inactivating bacteria, the cell membranes of bacterial was destructed and thus decreasing the activity of enzymes and releasing the cell contents, due to the generation of reactive oxygen species (O2•- and •OH) and thermal effect. Spectral regulation has the greatest impact on the sterilization efficiency of MnO2-TiO2, which reduces the probability of photocatalytic materials being excited.

Reducing Transmission of Airborne Respiratory Pathogens: A New Beginning as the COVID-19 Emergency Ends.

BACKGROUND: In response to the COVID-19 pandemic, new evidence-based strategies have emerged for reducing transmission of respiratory infections through management of indoor air. OBJECTIVES: This paper reviews critical advances that could reduce the burden of disease from inhaled pathogens and describes challenges in their implementation. DISCUSSION: Proven strategies include assuring sufficient ventilation, air cleaning by filtration, and air disinfection by germicidal ultraviolet (UV) light. Layered intervention strategies are needed to maximize risk reduction. Case studies demonstrate how to implement these tools while also revealing barriers to implementation. Future needs include standards designed with infection resilience and equity in mind, buildings optimized for infection resilience among other drivers, new approaches and technologies to improve ventilation, scientific consensus on the amount of ventilation needed to achieve a desired level of risk, methods for evaluating new air-cleaning technologies, studies of their long-term health effects, workforce training on ventilation systems, easier access to federal funds, demonstration projects in schools, and communication with the public about the importance of indoor air quality and actions people can take to improve it. https://doi.org/10.1289/EHP13878.

A quanta-independent approach for the assessment of strategies to reduce the risk of airborne infection.

The Wells-Riley model is extensively used for retrospective and prospective modelling of the risk of airborne transmission of infection in indoor spaces. It is also used when examining the efficacy of various removal and deactivation methods for airborne infectious aerosols in the indoor environment, which is crucial when selecting the most effective infection control technologies. The problem is that the large variation in viral load between individuals makes the Wells-Riley model output very sensitive to the input parameters and may yield a flawed prediction of risk. The absolute infection risk estimated with this model can range from nearly 0 % to 100 % depending on the viral load, even when all other factors, such as removal mechanisms and room geometry, remain unchanged. We therefore propose a novel method that removes this sensitivity to viral load. We define a quanta-independent maximum absolute before-after difference in infection risk that is independent of quanta factors like viral load, physical activity, or the dose-response relationships. The input data needed for a non-steady-state calculation are just the removal rates, room volume, and occupancy duration. Under steady-state conditions the approach provides an elegant solution that is only dependent on removal mechanisms before and after applying infection control measures. We applied this method to compare the impact of relative humidity, ventilation rate and its effectiveness, filtering efficiency, and the use of ultraviolet germicidal irradiation on the infection risk. The results demonstrate that the method provides a comprehensive understanding of the impact of infection control strategies on the risk of airborne infection, enabling rational decisions to be made regarding the most effective strategies in a specific context. The proposed method thus provides a practical tool for mitigation of airborne infection risk.

The impact of indoor air pollution on children's health and well-being: the experts' consensus.

BACKGROUND: Pollution of the indoor environment represents a concern for human health, mainly in case of prolonged exposure such as in the case of women, children, the elderly, and the chronically ill, who spend most of their time in closed environments. MAIN BODY: The aim of the study is to organize a group of experts in order to evaluate the evidence and discuss the main risk factors concerning indoor air and the impact on human health as well as challenging factors regarding preventive strategies to reduce pollution. The experts highlighted the main risk factors concerning indoor air, including poor ventilation, climatic conditions, chemical substances, and socio-economic status. They discussed the impact on human health in terms of mortality and morbidity, as well as challenging factors regarding preventive strategies to reduce pollution. CONCLUSION: The experts identified strategies that can be reinforced to reduce indoor pollution and prevent negative consequences on human health at national and local levels.

A facile cellulose finishing strategy through in-situ growth of sliver-doped manganese dioxide assisted by amine-quinone for improving indoor living quality.

Nowadays, various harmful indoor pollutants especially including bacteria and residual formaldehyde (HCHO) seriously threaten human health and reduce the quality of public life. Herein, a universal substrate-independence finishing approach for efficiently solving these hybrid indoor threats is demonstrated, in which amine-quinone network (AQN) was employed as reduction agent to guide in-situ growth of Ag@MnO2 particles, and also acted as an adhesion interlayer to firmly anchor nanoparticles onto diverse textiles, especially for cotton fabrics. In contrast with traditional hydrothermal or calcine methods, the highly reactive AQN ensures the efficient generation of functional nanoparticles under mild conditions without any additional catalysts. During the AQN-guided reduction, the doping of Ag atoms onto cellulose fiber surface optimized the crystallinity and oxygen vacancy of MnO2, providing cotton efficient antibacterial efficiency over 90 % after 30 min of contact, companying with encouraging UV-shielding and indoor HCHO purification properties. Besides, even after 30 cycles of standard washing, the Ag@MnO2-decorated textiles can effectively degrade HCHO while well-maintaining their inherent properties. In summary, the presented AQN-mediated strategy of efficiently guiding the deposition of functional particles on fibers has broad application prospects in the green and sustainable functionalization of textiles.

COVID-19 Mitigation in a K-12 School Setting: A Case Study of Avenues: The World School in New York City.

In this case study, we describe a well-resourced private school in New York City that implemented COVID-19 mitigation measures based on public health expert guidance and the lessons learned from this process. Avenues opened in New York City in 2012 and has since expanded, becoming Avenues: The World School, with campuses in São Paulo, Brazil; Shenzhen, China; the Silicon Valley, California; and online. It offers education at 16 grade levels: 2 early learning years, followed by a prekindergarten through grade 12. We describe the mitigation measures that Avenues implemented on its New York campus. We compare COVID-19 case prevalence at the school with COVID-19 case positivity in New York City, as reported by the New York State Department of Health. We also compare the school's indoor air quality to ambient indoor air quality measures reported in the literature. The school's mitigation measures successfully reduced the prevalence of COVID-19 among its students, staff, and faculty. The school also established a consistently high level of indoor air quality safety through various ventilation mechanisms, designed to reduce common indoor air pollutants. The school received positive parent and community feedback on the policies and procedures it established, with many parents commenting on the high level of trust and quality of communication established by the school. The successful reopening provides useful data for school closure and reopening standards to prepare for future pandemic and epidemic events.

Low-cost interventions to improve ventilation in long-term care facilities.

Residents of long-term care facilities are particularly vulnerable to communicable diseases. Low-cost interventions to increase air exchange rates (AERs) may be useful in reducing the transmission of airborne communicable diseases between long-term care residents and staff. In this study, carbon dioxide gas was used as a tracer to evaluate the AER associated with the implementation of low-cost ventilation interventions. Under baseline conditions with the room's door closed, the mean AER was 0.67 ACH; while baseline conditions with the door open had a significantly higher mean AER of 3.87 ACH (p < 0.001). Subsequently opening a window with the door open increased mean AER by 1.49 ACH (p = 0.012) and adding a fan in the window further increased mean AER by 1.87 ACH (p < 0.001). Regression analyses indicated that the flow rate of air entering through the window, both passively and through the use of a fan, was significantly associated with an increase in AER (p < 0.001). These results indicate that low-cost interventions that pull outside air into resident rooms were effective in improving the air exchange rates in these facilities. While implementation of these interventions is dependent on facility rules and isolation requirements of residents with airborne communicable diseases, these interventions remain viable options for long-term care facilities to improve resident room ventilation without requiring costly ventilation system upgrades.

Efficiency of CONTRAfluran™ in reducing sevoflurane pollution from maintenance anaesthesia in minimal flow end-tidal control mode for laparoscopic surgery: Efficiency of CONTRAfluran™.

BACKGROUND: Recommendations exist that aim to mitigate the substantial ecological impact of anaesthesia. One option is to use anaesthetic gas capturing technology at anaesthesia workstation exhausts to harvest and recycle volatile agents. However, the efficiency of such technology is mainly unverified in vivo. METHODS: The efficiency of CONTRAfluran™ in capturing sevoflurane from an anaesthesia workstation exhaust (when set to minimal flow and end-tidal control mode) was evaluated in 70 adult patients scheduled for general or bariatric laparoscopic surgery. The weight of the sevoflurane vaporiser and CONTRAfluran canister was measured before and after each case, to calculate total sevoflurane consumption and retention. Retention was measured after the minimal flow maintenance phase and after the high flow washout phase. The total retention efficiency was the fraction of all consumed sevoflurane captured by the CONTRAfluran canister. The primary objective was to examine the retention efficiency of CONTRAfluran in a clinical surgical setting, where all feasible strategies to minimise sevoflurane consumption and optimise the efficacy of CONTRAfluran were utilised. The secondary objective was to analyse the correlation between mass transfer and the duration of the case. RESULTS: Mean (SD) volume of sevoflurane captured using CONTRAfluran was 4.82 (1.41) ml, representing 45% (95%CI 42-48%) of all sevoflurane administered. The highest amount of retention was found during the washout phase. Retention efficiency did not correlate with the duration of the case. CONCLUSIONS: Over half of the sevoflurane administered was not captured by the CONTRAfluran canister when minimal flow techniques were used, likely due to residual accumulation of sevoflurane in the patient after tracheal extubation or, to a lesser extent, due to ventilation system leakage. However, as every prevented emission is commendable, CONTRAfluran may be a potentially valuable tool for reducing the environmental footprint of sevoflurane-based anaesthesia.

Systematically quantifying the dynamic characteristics of PM2.5 in multiple indoor environments in a plateau city: Implication for internal contribution.

People generally spend most of their time indoors, making a comprehensive evaluation of air pollution characteristics in various indoor microenvironments of great significance for accurate exposure estimation. In this study, field measurements were conducted in Kunming City, Southwest China, using real-time PM2.5 sensors to characterize indoor PM2.5 in ten different microenvironments including three restaurants, four public places, and three household settings. Results showed that the daily average PM2.5 concentrations in restaurants, public spaces, and households were 78.4 ± 24.3, 20.1 ± 6.6, and 18.0 ± 4.3 µg/m3, respectively. The highest levels of indoor PM2.5 in restaurants were owing to strong internal emissions from cooking activities. Dynamic changes showed that indoor PM2.5 levels increased during business time in restaurants and public places, and cooking time in residential kitchens. Compared with public places, restaurants generally exhibit more rapid increases in indoor PM2.5 due to cooking activities, which can elevate indoor PM2.5 to high levels (5.1 times higher than the baseline) in a short time. Furthermore, indoor PM2.5 in restaurants were dominated by internal emissions, while outdoor penetration contributed mostly to indoor PM2.5 in public places and household settings. Results from this study revealed large variations in indoor PM2.5 in different microenvironments, and suggested site-specific measures for indoor PM2.5 pollution alleviation.