Neurological and neurobehavioral effects of welders in Egypt exposed to manganese containing welding fumes.

PURPOSE: Welders are more likely to develop neurobehavioral disorders because of their exposure to neurotoxic metals such as manganese. This study aimed to measure the neurobehavioral performance of welders occupationally exposed to manganese at welding enterprises and its relationship with the workplace environment. METHODS: It is a comparative cross-sectional study carried out on 130 welders working at 50 welding enterprises in Menoufia governorate, Egypt, compared to 130 non-occupationally exposed controls. RESULTS: It was found that the environments of the studied welding enterprises had levels of respirable dust, manganese, and total welding fumes that exceeded internationally permissible limits. In addition, the mean blood manganese levels were significantly higher among welders (4.16 ± 0.61) than the controls (1.72 ± 0.41). Welders had a significantly higher prevalence of neurological manifestations and lower performance of neurobehavioral tests. Lower neurobehavioral performance among welders was significantly correlated with increased work duration and blood levels in some tests. CONCLUSION: To lessen the fumes in the breathing zone of workers, it is therefore strongly recommended to regularly wear high-quality personal protective equipment, especially masks, and to ensure proper ventilation.

Longitudinal changes in cardiovascular disease-related proteins in welders.

OBJECTIVE: Occupational exposure to welding fumes is linked to a higher risk of cardiovascular disease; however, the threshold exposure level is unknown. Here, we aimed to identify changes in proteins associated with cardiovascular disease in relation to exposure to welding fumes. METHODS: Data were obtained from two timepoints six years apart for 338 non-smoking men (171 welders, 167 controls); of these, 174 (78 welders, 96 controls) had measurements available at both timepoints. Exposure was measured as personal respirable dust (adjusted for personal protective equipment), welding years, and cumulative exposure. Proximity extension assays were used to measure a panel of 92 proteins involved in cardiovascular processes in serum samples. Linear mixed models were used for longitudinal analysis. The biological functions and diseases related to the identified proteins were explored using the Ingenuity Pathway Analysis software. RESULTS: At both timepoints, the median respirable dust exposure was 0.7 mg/m3 for the welders. Seven proteins were differentially abundant between the welders and controls and increased incrementally with respirable dust: FGF23, CEACAM8, CD40L, PGF, CXCL1, CD84, and HO1. CD84 was significant after adjusting for multiple comparisons. These proteins have been linked to disorders of blood pressure, damage related to clogged blood vessels, and chronic inflammatory disorders. CONCLUSION: Exposure to mild steel welding fumes below current occupational exposure limits for respirable particles and welding fumes in Europe and the US (1-5 mg/m3) was associated with changes in the abundance of proteins related to cardiovascular disease. Further research should evaluate the utility of these proteins as prospective biomarkers of occupational cardiovascular disease.

Do toenail manganese and iron levels reflect brain metal levels or brain metabolism in welders?

Inhalation of welding fumes can cause metal accumulation in the brain, leading to Parkinsonian-like symptoms. Metal accumulation and altered neurochemical profiles have been observed using magnetic resonance imaging (MRI) in highly exposed welders, being associated with decreased motor function and cognition. While MRI is impractical to use as a health risk assessment tool in occupational settings, toenail metal levels are easier to assess and have been demonstrated to reflect an exposure window of 7-12 months in the past. Yet, it is unclear whether toenail metal levels are associated with brain metal levels or changes in metabolism, which are the root of potential health concerns. This study investigates whether toenail manganese (Mn) and iron (Fe) levels, assessed at several time points, correlate with brain Mn and Fe levels, measured by MRI, as well as brain GABA, glutamate (Glu), and glutathione (GSH) levels, measured by Magnetic Resonance Spectroscopy (MRS), in seventeen Mn-exposed welders. Quantitative T1 and R2* MRI maps of the whole brain, along with GABA, Glu, and GSH MRS measurements from the thalamus and cerebellum were acquired at baseline (T0). Toenail clippings were collected at T0 and every three months after the MRI for a year to account for different exposure periods being reflected by toenail clippings and MRI. Spearman correlations of toenail metal levels were run against brain metal and metabolite levels, but no significant associations were found for Mn at any timepoint. Cerebellar GSH positively correlated with toenail Fe clipped twelve months after the MRI (p = 0.05), suggesting an association with Fe exposure at the time of the MRI. Neither thalamic GABA nor Glu correlated with toenail Fe levels. In conclusion, this study cannot support toenail Mn as a proxy for brain Mn levels or metabolic changes, while toenail Fe appears linked to brain metabolic alterations, underscoring the importance of considering other metals, including Fe, in studying Mn neurotoxicity.

Absence of lung tumor promotion with reduced tumor size in mice after inhalation of copper welding fumes.

Welding fumes are a Group 1 (carcinogenic to humans) carcinogen as classified by the International Agency for Research on Cancer. The process of welding creates inhalable fumes rich in iron (Fe) that may also contain known carcinogenic metals such as chromium (Cr) and nickel (Ni). Epidemiological evidence has shown that both mild steel (Fe-rich) and stainless steel (Fe-rich + Cr + Ni) welding fume exposure increases lung cancer risk, and experimental animal data support these findings. Copper-nickel (CuNi) welding processes have not been investigated in the context of lung cancer. Cu is intriguing, however, given the role of Cu in carcinogenesis and cancer therapeutics. This study examines the potential for a CuNi fume to induce mechanistic key characteristics of carcinogenesis in vitro and to promote lung tumorigenesis, using a two-stage mouse bioassay, in vivo. Male A/J mice, initiated with 3-methylcholanthrene (MCA; 10 µg/g), were exposed to CuNi fumes or air by whole-body inhalation for 9 weeks (low deposition-LD and high deposition-HD) and then sacrificed at 30 weeks. In BEAS-2B cells, the CuNi fume-induced micronuclei and caused DNA damage as measured by γ-H2AX. The fume exhibited high reactivity and a dose-response in cytotoxicity and oxidative stress. In vivo, MCA/CuNi HD and LD significantly decreased lung tumor size and adenomas. MCA/CuNi HD exposure significantly decreased gross-evaluated tumor number. In summary, the CuNi fume in vitro exhibited characteristics of a carcinogen, but in vivo, the exposure resulted in smaller tumors, fewer adenomas, less hyperplasia severity, and with HD exposure, less overall lung lesions/tumors.

Association between exposure to metalworking fluid aerosols, occupational noise and chronic kidney disease: a cross-sectional study in China.

BACKGROUND: Chronic kidney disease (CKD) carries a high public health burden yet little is known about the relationship between metalworking fluid (MWF) aerosols, occupational noise and CKD. We aimed to explore the relationship between occupational MWF aerosols, occupational noise and CKD. METHODS: A total of 2,738 machinists were sampled from three machining companies in Wuxi, China, in 2022. We used the National Institute for Occupational Safety and Health (NIOSH) method 5524 to collect individual samples for MWF aerosols exposure, and the Chinese national standard (GBZ/T 189.8-2007) method to test individual occupational noise exposure. The diagnostic criteria for CKD were urinary albumin/creatinine ratio (UACR) of ≥ 30 mg/g and reduced renal function (eGFR < 60 mL.min- 1. 1.73 m- 2) lasting longer than 3 months. Smooth curve fitting was conducted to analyze the associations of MWF aerosols and occupational noise with CKD. A segmented regression model was used to analyze the threshold effects. RESULTS: Workers exposed to MWF aerosols (odds ratio [OR] = 2.03, 95% confidence interval [CI]: 1.21-3.41) and occupational noise (OR = 1.77, 95%CI: 1.06-2.96) had higher prevalence of CKD than nonexposed workers. A nonlinear and positive association was found between increasing MWF aerosols and occupational noise dose and the risk of CKD. When daily cumulative exposure dose of MWF aerosols exceeded 8.03 mg/m3, the OR was 1.24 (95%CI: 1.03-1.58), and when occupational noise exceeded 87.22 dB(A), the OR was 1.16 (95%CI: 1.04-1.20). In the interactive analysis between MWF aerosols and occupational noise, the workers exposed to both MWF aerosols (cumulative exposure ≥ 8.03 mg/m3-day) and occupational noise (LEX,8 h ≥ 87.22 dB(A)) had an increased prevalence of CKD (OR = 2.71, 95%CI: 1.48-4.96). MWF aerosols and occupational noise had a positive interaction in prevalence of CKD. CONCLUSIONS: Occupational MWF aerosols and noise were positively and nonlinearly associated with CKD, and cumulative MWF aerosols and noise exposure showed a positive interaction with CKD. These findings emphasize the importance of assessing kidney function of workers exposed to MWF aerosols and occupational noise. Prospective and longitudinal cohort studies are necessary to elucidate the causality of these associations.

Bioaerosol Exposures and Respiratory Diseases in Cannabis Workers.

PURPOSE OF REVIEW: This review investigates occupational inhalation hazards associated with biologically derived airborne particles (bioaerosols) generated in indoor cannabis cultivation and manufacturing facilities. RECENT FINDINGS: Indoor cannabis production is growing across the US as are recent reports of respiratory diseases among cannabis workers, including occupational asthma morbidity and mortality. More information is needed to understand how bioaerosol exposure in cannabis facilities impacts worker health and occupational disease risk. Preliminary studies demonstrate a significant fraction of airborne particles in cannabis facilities are comprised of fungal spores, bacteria, and plant material, which may also contain hazardous microbial metabolites and allergens. These bioaerosols may pose pathogenic, allergenic, toxigenic, and pro-inflammatory risks to workers. The absence of multi-level, holistic bioaerosol research in cannabis work environments necessitates further characterization of the potential respiratory hazards and effective risk prevention methods to safeguard occupational health as the cannabis industry continues to expand across the US and beyond.

Enhancement of keratinocyte survival and migration elicited by interleukin 24 upregulation in dermal microvascular endothelium upon welding-fume exposure.

Occupational exposure to welding fumes constitutes a serious health concern. Although the effects of fumes on the respiratory tract have been investigated, few apparent reports were published on their effects on the skin. The purpose of this study was to investigate the effects of exposure to welding fumes on skin cells, focusing on interleukin-24 (IL-24), a cytokine involved in the pathophysiology of skin conditions, such as atopic dermatitis and psoriasis. Treatment with welding fumes increased IL-24 expression and production levels in human dermal microvascular endothelial cells (HDMEC) which were higher than that in normal human epidermal keratinocytes. IL-24 levels in Trolox and deferoxamine markedly suppressed welding fume-induced IL-24 expression in HDMEC, indicating that oxidative stress may be involved in this cytokine expression. IL-24 released from HDMEC protected keratinocytes from welding fume-induced damage and enhanced keratinocyte migration. Serum IL-24 was higher in welding workers than in general subjects and was positively correlated with elevated serum levels of 8-hydroxy-2'-deoxyguanosine, an oxidative stress marker. In summary, welding fumes enhanced IL-24 expression in HDMEC, stimulating keratinocyte survival and migration. IL-24 expression in endothelial cells may act as an adaptive response to welding-fume exposure in the skin.

Occupational particle exposure and chronic kidney disease: a cohort study in Swedish construction workers.

OBJECTIVES: Increasing epidemiological and experimental evidence suggests that particle exposure is an environmental risk factor for chronic kidney disease (CKD). However, only a few case-control studies have investigated this association in an occupational setting. Hence, our objective was to investigate associations between particle exposure and CKD in a large cohort of Swedish construction workers. METHODS: We performed a retrospective cohort study in the Swedish Construction Workers' Cohort, recruited 1971-1993 (n=286 089). A job-exposure matrix was used to identify workers exposed to nine different particulate exposures, which were combined into three main categories (inorganic dust and fumes, wood dust and fibres). Incident CKD and start of renal replacement therapy (RRT) were obtained from validated national registries until 2021 and analysed using adjusted Cox proportional hazards models. RESULTS: Exposure to inorganic dust and fumes was associated with an increased risk of CKD and RRT during working age (adjusted HR for CKD at age <65 years 1.15, 95% CI 1.05 to 1.26). The elevated risk did not persist after retirement age. Exposure to cement dust, concrete dust and diesel exhaust was associated with CKD. Elevated HRs were also found for quartz dust and welding fumes. CONCLUSIONS: Workers exposed to inorganic particles seem to be at elevated risk of CKD and RRT. Our results are in line with previous evidence of renal effects of ambient air pollution and warrant further efforts to reduce occupational and ambient particle exposure.

Low-Level Respirable Crystalline Silica and Silicosis: Long-Term Follow-Up of Vermont Granite Workers.

The lifetime risk of silicosis associated with low-level occupational exposure to respirable crystalline silica remains unclear because most previous radiographic studies included workers with varying exposure concentrations and durations. This study assessed the prevalence of silicosis after lengthy exposure to respirable crystalline silica at levels ≤ 0.10 mg/m3. Vermont granite workers employed any time during 1979-1987 were traced and chest radiographs were obtained for 356 who were alive in 2017 and residing in Vermont. Work history, smoking habits and respiratory symptoms were obtained by interview, and exposure was estimated using a previously developed job-exposure matrix. Associations between radiographic findings, exposure, and respiratory symptoms were assessed by ANOVA, chi-square tests and binary regression. Fourteen workers (3.9%) had radiographic evidence of silicosis, and all had been employed ≥30 years. They were more likely to have been stone cutters or carvers and their average exposure concentrations and cumulative exposures to respirable crystalline silica were significantly higher than workers with similar durations of employment and no classifiable parenchymal abnormalities. This provides direct evidence that workers with long-term exposure to low-level respirable crystalline silica (≤0.10 mg/m3) are at risk of developing silicosis.

A study of inflammatory biomarkers in crystalline silica exposed rock drillers.

BACKGROUND: Crystalline silica (CS) exposure can cause serious lung disease in humans, but mechanisms of pulmonary toxicity have not been completely elucidated. AIMS: To assess pro-inflammatory and anti-inflammatory biomarkers and biomarkers related to the development of chronic obstructive pulmonary disease and fibrosis in serum of rock drillers exposed to CS. METHODS: Rock drillers (N = 123) exposed to CS and non-specified particulate matter (PM) were compared to 48 referents without current or past exposure to PM in a cross-sectional study. RESULTS: The rock drillers had been exposed to CS for 10.7 years on average. Geometric mean (GM) current exposure was estimated to 36 µg/m3. Their GM concentration of matrix metalloproteinase 12 (MMP-12) was significantly higher (16 vs. 13 ng/L; p = 0.04), while interleukin (IL) 6 and IL-8 were significantly lower compared to the referents. Also pentraxin 3 was significantly lower (3558 vs. 4592 ng/L; p = 0.01) in the rock drillers. A dose-response relationship was observed between cumulative exposure to CS and MMP-12, the highest exposed subgroup having significantly higher MMP-12 concentrations than the referents. CONCLUSION: Exposure to CS may increase circulating MMP-12 concentrations in a dose-response related fashion. The results may also suggest a down-regulation of pro-inflammatory pathways.

Exposure to occupational air pollution and vascular endothelial dysfunction in workers of the steel industry in Iran.

Air pollution is recognized as a risk factor for cardiovascular diseases; however, the precise underlying mechanisms remain unclear. This study investigated the impact of occupational air pollution exposure on endothelial function in workers within the steel industry. Specifically, we examined male employees in the coke-making division of the Isfahan Steel Company in Iran, as well as those in administrative roles with no known history of cardiovascular risk. Data on age, body mass index, duration of employment, blood pressure, fasting blood sugar, and lipid profile were collected. To assess endothelial function, flow-mediated dilation (FMD) was measured. The baseline brachial artery diameter was greater (mean difference [95% CI] = 0.068 mm [0.008 to 0.128]), while the FMD was lower (mean difference [95% CI] = -0.908 % [-1.740 to -0.075]) in the coke-making group than in the control group. After controlling for potential confounding variables, it was observed that working in the coke-making sector of the industry was associated with lower FMD (F = 3.954, p = .049). These findings indicated that occupational air pollution exposure among workers in the steel industry is linked to impaired endothelium-dependent vasodilation.

Diesel Engine Exhaust Exposure in Relation to Lung Cancer in Long-Haul Truck Drivers: An Eight-Step Concept Analysis.

BACKGROUND: Long-haul truck drivers (LHTDs) face a number of occupational hazards. One such hazard is exposure to diesel engine exhaust (DEE). However, this concept has yet to be analyzed. To address this gap, a concept analysis was conducted to explore the effects of DEE in relation to lung cancer. METHODS: Walker and Avant's eight-step concept analysis method was utilized: concept selection, analysis purpose, concept uses, defining attributes, model case, borderline case, antecedents and consequences, and empirical referents. PubMed, Scopus, and CINAHL databases were searched for relevant literature. FINDINGS: Diesel engine exhaust was identified as a mixture of gases and particulates that are considered carcinogenic. Defining attributes of DEE for truckers include respiratory effects such as decreased peak flow and increased airway resistance leading to symptoms such as a phlegm-producing cough, eye and throat irritation, exacerbation of asthma symptoms, and allergic responses. The identified level of DEE exposure associated with these attributes is 75 µg EC/m3 for 1 to 2 hours daily or a long-term exposure of 10 µg EC/m3. The conceptual definition of DEE in truckers was illustrated by the attributes, antecedents, consequences, model case, and empirical referents. CONCLUSION: Lung cancer was identified as a significant consequence of occupational DEE exposure for LHTDs. This analysis highlights the need for future research to develop interventions that will safeguard truckers from the adverse health effects of DEE exposure.

Welding fume exposure and prevalence of chronic respiratory symptoms among welders in micro- and small-scale enterprise in Akaki Kality sub-city, Addis Ababa, Ethiopia: a comparative cross-sectional study.

BACKGROUND: Exposure to welding fumes can lead to different respiratory health disorders, including lung cancer, due to long-term exposures. In Ethiopia, large numbers of people are engaged in the welding sector. Often, these workers are exposed to welding fumes at their workplaces, however, the level of exposure and its health effects have never been studied. OBJECTIVE: To measure the level of personal welding fume exposure and assess chronic respiratory symptoms and associated factors, among micro and small-scale enterprise metal workshop workers, in Akaki Kality Sub city, Ethiopia. METHODS: A comparative cross-sectional study involving 226 welders and 217 controls. Chronic respiratory symptoms were assessed using a standardized questionnaire adopted from the American Thoracic Society (ATS). Welding fumes were collected from the welder's breathing zone using 37 mm close-faced plastic cassettes fitted with Polyvinyl Chloride (PVC) filters connected to Casella pumps at an airflow rate of 2 L/min. RESULT: The overall prevalence of chronic respiratory symptoms among welders and controls were 54 (23.9%) and 20 (9.2%) respectively. The geometric mean and geometric standard deviation (GSD) of personal welding fume exposure, among welders was 5.98 mg/m3 (± GSD = 1.54). In this study, 53.3% of the samples exceeded the Occupational Exposure Limit defined by the American Conference of Governmental Industrial Hygiene. Chronic respiratory symptoms were significantly associated with educational status (Adjusted Odds Ratio (AOR): 5.11, 95% CI: 1.35, 19.33), respiratory protective equipment use (AOR: 3.33, 95% CI: 1.52, 7.31), safety training (AOR: 2.41, 95% CI: 1.10, 5.28), smoking (AOR:3.57, 95% CI: 1.54, 8.23), welding machine maintenance (AOR: 1.87, 95% CI: 1.01, 3.59) and welding site (i.e. indoors vs. outdoor) (AOR: 6.85. 95% CI: 2.36, 19.89). CONCLUSIONS: The prevalence of chronic respiratory symptoms among welding workers was significantly higher than controls. More than half of the samples exceeded the Occupational Exposure Limit. Educational status, implementation of safety training, and welding sites were significantly associated with chronic respiratory symptoms. The results suggested a need to reduce welding fume exposure to improve the respiratory health of the workers.

Risk of bladder, kidney and prostate cancer from occupational exposure to welding fumes: a systematic review and meta-analysis.

BACKGROUND: Our aimed to conduct a meta-analysis of cohort studies on risk of genitourinary (GU) cancers in workers exposed to welding fumes (WF). METHODS: We performed a systematic review of studies published on Pubmed, Scopus and Embase following PRISMA criteria. Two researchers selected cohort studies on WF exposure. From 2582 articles, 7 non-overlapping studies were included. Quality of studies was scored according to CASP. We run a random effects meta-analysis to calculate the relative risk (RR) and 95% confidence intervals (CI) of GU cancer, overall and stratified by cancer, country, and quality score. RESULTS: We included seven studies reporting results on GU cancers, including prostate, bladder and kidney cancer (PC, BC, and KC). The RR was 1.19 (95% CI = 1.07-1.32, 16 risk estimates) for GU cancer; 1.13 (95% CI = 0.90-1.42, 4 risk estimates) for PC; 1.26 (95% CI = 0.98-1.60, 7 risk estimates) for BC and 1.28 (95% CI = 1.12-1.47, 5 risk estimates) for KC. Heterogeneity was present in all meta-analyses (p < 0.001). The increased risk was more pronounced in North American than in European studies (respectively, OR = 1.35, 95% CI = 1.18-1.55; OR = 1.13, 95% CI = 1.01-1.27 p heterogeneity = 0.03). There was no heterogeneity according to quality score (p = 0.4). Data were insufficient to investigate associations by industry or welding type. Publication bias for each cancer was excluded. CONCLUSION: This meta-analysis suggests increased risk of KC and BC, but not of PC, in workers exposed to WF. Confounding by other occupational and non-occupational risk factors could not be excluded. Data were not adequate to address the risk of specific exposure circumstances.

Occupational Dust Exposure as a Risk Factor for Developing Lung Function Impairment.

OBJECTIVE: Dust exposure is high in several industries. We investigated associations of exposure in paper mills, wood pellet plants, and iron foundries with lung function impairment. METHODS: Respirable silica, inhalable paper dust, or inhalable wood dust were collected as personal samples and spirometry was performed. Multiple linear regression analyzed associations with FEV 1 %pred and FVC%pred. RESULTS: Wood pellet workers with high exposure to inhalable dust had lower FEV 1 %pred (95% CI) (-9.4 [-16 to -2.6]) and FVC%pred (-9.8 [-15 to -4.0]) compared with lowest exposure level. Workers at paper mills and foundries had no dose-dependent association but lower FEV 1 %pred and FVC%pred than in workers at wood pellets plants. CONCLUSIONS: Increased exposure to inhalable wood dust is associated with decreased lung function. Foundry and paper mill workers have generally lower lung function than wood pellet workers. Spirometry should be considered in workers in industries with airborne particulate matter pollution.

Application of Multiple Occupational Health Risk Assessment Models for Metal Fumes in Welding Process.

Welding fumes have an important role to create the adverse health effects. So, the aim of this study was to use of multiple occupational health risk assessment models for metal fumes in welding process. This cross-sectional study was conducted among welding workers. Sampling of heavy metals such as Sn, Zn, Al, Fe, Cd, Pb, Cu, Mn, Ni, Cr, and As was provided based on the National Institute for Occupational Safety and Health (NIOSH) method 7300 and analyzed by inductively coupled plasma mass spectroscopy (ICP-MS). Risk assessment was managed by four methods including Malaysia's method, Control of Substances Hazardous to Health Essentials (COSHH model), Chinese OHRA standard (GBZ/T 298-2017), and EPA method. Also, Monte Carlo simulation was used to examine the uncertainties by using the Crystal Ball tool. To compare the models, the risk levels of each model were converted into the risk ratio and the SPSS 22.0 software was used to the statistical analysis. The consistency of the two occupational health risk assessment models was examined by Cohen's Kappa. Risk ration was the highest level for Cr (VI) fumes in all models. Also, carcinogenic risk was unacceptable for all examined fumes. Moreover, non-carcinogenic risk was the highest (HI > 1) for As fumes. Mont Carlo simulations suggested that exposure time (ET) had a significant effect on the risk. Also, there was a good consistency between Malaysia method/GBZ/T 298-2017 and COSHH model/GBZ/T 298-2017. Therefore, it is recommended that the engineering and administrative controls should be provided to reduce exposure.

Impact of welding occupation on serum aluminium level and its association with physical health, cognitive function, and quality of life: a cross-sectional study.

OBJECTIVE: There is an occupational health concern about welders' inhalation of toxic aluminium fumes. We investigated whether serum aluminium level (SAL) and demographic variables can significantly predict physical health parameters, cognition, and quality of life (QoL) among welders. METHODS: The cross-sectional study involved 100 age- and location-matched men (50 welders and 50 non-welders). SAL obtained using a graphite furnace atomic absorption spectrometer, and data collected using blood pressure and body mass index (BMI) apparatuses, biodata form, pain rating scale, General Practitioner Assessment of Cognition, WHOQoL-BREF, and Nordic musculoskeletal symptoms (MSS) questionnaire were analysed using independent samples t test, chi-square, Pearson's correlation, and hierarchical linear regression. RESULTS: Welders had significantly higher SAL (mean difference [MD] = 1.77 µg/L, p < 0.001), lower QoL (MD = 3.92, p = 0.039), and higher prevalence of MSS on the neck (χ2 = 10.187, p = 0.001), shoulder (χ2 = 9.007, p = 0.003), upper back (χ2 = 6.832, p = 0.009), and knee (χ2 = 12.190, p < 0.001) than non-welders. There was a significant bivariate association between SAL, systolic blood pressure (ß = 0.313, p = 0.002), and BMI (ß = 0.279, p = 0.005), but not pain intensity, cognition, or QoL. SAL remained a significant predictor of systolic blood pressure after adjustment for physical health and QoL parameters (ß = 0.191, p = 0.044). The association between SAL and social QoL became significant after adjustment for physical health and other QoL domains (ß = - 0.210, p = 0.032) and demographic variables (ß = - 0.233, p = 0.046). CONCLUSION: Welders had significantly higher SAL, musculoskeletal symptoms, blood pressure, and lower QoL than non-welders. SAL was associated with adverse physical health parameters and social-related QoL, not cognition. We recommend routine aluminium bioavailability and physical health checks among welders.

Alterations to biomarkers related to long-term exposure to diesel exhaust at concentrations below occupational exposure limits in the European Union and the USA.

BACKGROUND: We previously found that occupational exposure to diesel engine exhaust (DEE) was associated with alterations to 19 biomarkers that potentially reflect the mechanisms of carcinogenesis. Whether DEE is associated with biological alterations at concentrations under existing or recommended occupational exposure limits (OELs) is unclear. METHODS: In a cross-sectional study of 54 factory workers exposed long-term to DEE and 55 unexposed controls, we reanalysed the 19 previously identified biomarkers. Multivariable linear regression was used to compare biomarker levels between DEE-exposed versus unexposed subjects and to assess elemental carbon (EC) exposure-response relationships, adjusted for age and smoking status. We analysed each biomarker at EC concentrations below the US Mine Safety and Health Administration (MSHA) OEL (<106 µg/m3), below the European Union (EU) OEL (<50 µg/m3) and below the American Conference of Governmental Industrial Hygienists (ACGIH) recommendation (<20 µg/m3). RESULTS: Below the MSHA OEL, 17 biomarkers were altered between DEE-exposed workers and unexposed controls. Below the EU OEL, DEE-exposed workers had elevated lymphocytes (p=9E-03, false discovery rate (FDR)=0.04), CD4+ count (p=0.02, FDR=0.05), CD8+ count (p=5E-03, FDR=0.03) and miR-92a-3p (p=0.02, FDR=0.05), and nasal turbinate gene expression (first principal component: p=1E-06, FDR=2E-05), as well as decreased C-reactive protein (p=0.02, FDR=0.05), macrophage inflammatory protein-1ß (p=0.04, FDR=0.09), miR-423-3p (p=0.04, FDR=0.09) and miR-122-5p (p=2E-03, FDR=0.02). Even at EC concentrations under the ACGIH recommendation, we found some evidence of exposure-response relationships for miR-423-3p (ptrend=0.01, FDR=0.19) and gene expression (ptrend=0.02, FDR=0.19). CONCLUSIONS: DEE exposure under existing or recommended OELs may be associated with biomarkers reflective of cancer-related processes, including inflammatory/immune response.

Associations between welding fume exposure and neurological function in Japanese male welders and non-welders.

OBJECTIVES: There are some studies reporting the association between (manganese [Mn]) exposure to welding fume and neurological dysfunction. This study examined the relationship between Mn exposure and neurological behavior in Japanese male welders and non-welders using biological samples, which to date has not been assessed in Japan. METHODS: A total of 94 male welders and 95 male non-welders who worked in the same factories were recruited. The blood and urine samples were obtained from all the participants to measure Mn exposure levels. Neurological function tests were also conducted with all participants. The sampling of the breathing air zone using a personal sampler was measured for welders only. RESULTS: The odds ratios (ORs) for the Working Memory Index (WMI) scores were significantly higher among all participants in the low blood Mn concentration group than those in the high blood Mn concentration group (OR, 2.77; 95% confidence interval [CI], 1.24, 6.19; P = .013). The association of WMI scores and blood Mn levels in welders had the highest OR (OR, 3.73; 95% CI, 1.04, 13.38; P = .043). Although not statistically significant, a mild relationship between WMI scores and blood Mn levels was observed in non-welders (OR, 2.09; 95% CI, 0.63, 6.94; P = .227). CONCLUSIONS: The results revealed a significant positive relationship between blood Mn and neurological dysfunction in welders. Furthermore, non-welders at the same factories may be secondarily exposed to welding fumes. Further research is needed to clarify this possibility.