Challenges in differential diagnosis and treatment of cervical root resorption vs. root caries.

External cervical root resorption may be occasionally mistaken for root caries and vice versa. Radiographical and clinical differential diagnoses of cervical root resorption and root caries are essential for correct treatment planning and a successful treatment outcome. This article reviews the contemporary literature and summarises the prevailing professional consensus pertaining to external cervical root resorption. Clinical diagnostics which help distinguish cervical root resorption from root caries are outlined and treatment approaches of external cervical root resorption are discussed.

A depth-resolved quantitative evaluation method for non-carious cervical lesions treatment with optical coherence tomography.

OBJECTIVES: The aim of this study is prognostic assessment of surface smoothness and the presence of internal bubbles after treatment of non-cancerous cervical lesions (NCCLs) using optical coherence tomography (OCT). METHODS: After treatment with NCCLs, cross-sectional images of the lesion parts of the sample were non-invasively acquired and analyzed. The surface smoothness between tooth and resin, resin and cemento-enamel junction, and the presence bubble inside resin was confirmed. In addition, using an algorithm that distinguishes between resin and dental structure based on OCT cross-sectional images, we quantitatively analyzed the amount of resin used in treating NCCLs and acquired 3D images. RESULTS: The inner structure of the resin in each sample was checked, and the presence of bubbles was confirmed. In addition, the resin sections were separated from the tomographic images acquired by OCT to visualize 3D images. The volume of resin used in the treatment part of each NCCLs samples was quantitatively analyzed as 3.7216 ∼ 14.889 mm3. CONCLUSIONS: OCT is able to measure not only the surface abrasion provided by existing intraoral scanner, but also the size and depth location of interal bubbles, which is distinctive advantage of our method. Based on our results, OCT is a significant tool for qualitative and quantitative analysis of dental NCCLs treatment before and after treatment. CLINICAL SIGNIFICANCE: The study used OCT, a non-destructive diagnostic, to reveal the structure of the resin and the location and size of bubbles after NCCLs treatment. These findings could be golden standard in determining the prognosis of NCCLs treatment.

Pericervical Dentin Metrics in Mandibular First Molars Determined with Digital Periapical Radiography and Cone-beam Computed Tomography.

INTRODUCTION: Pericervical root dentin is decisive for the long-term mechanical integrity of root-filled teeth. Current treatment protocol does not include a customized step to determine the pretreatment residual pericervical root dentin. OBJECTIVE: To determine and compare the residual root dentin and canal width using digital periapical radiography (DPR) and cone-beam computed tomography (CBCT) at the apical limit of the pericervical area (PCA) in mandibular first molars. METHODS: DPR and CBCT images of 60 patients with age between 22 and 76 years were used to determine (a) the mesiodistal widths of the root canal (pericervical dimensions [PCL]-C) and the root (PCL-R) of mandibular first molars at the apical limit of the PCA and (b) the intracanal distance from the apical limit of the PCA to the radiographic apex (intracanal distance [ICD]). The correlation between the PCL and ICD measurements obtained from DPR and CBCT were evaluated. RESULTS: Values between 0.10-0.80 mm and 0.00-1.10 mm were obtained for PCL-C using DPR and CBCT respectively (95% CI). The PCL values between 0.90-2.30 mm and 0.00-2.30 mm were obtained from DPR and CBCT respectively (95% CI). The ICD ranged between 4.6-12.3 mm in DPR and 4.40-12.0 mm in CBCT (95% CI). The comparative analysis showed differences from -0.9 to 0.5 mms for PCL and -2.00 to 1.5 mms for ICD between DPR and CBCT techniques respectively. CONCLUSION: The PCL and ICD determined from DPR and CBCT provided the pericervical dentin metrics that could be utilized clinically as a guideline for decision-making in endodontic treatment.

Prevalence and Characterization of External Cervical Resorption Using Cone Beam Computed Tomography.

INTRODUCTION: The aim of this study was to assess the prevalence of external cervical resorption (ECR) and characterize the cases of ECR using cone beam computed tomography (CBCT). METHODS: High-resolution CBCT scans of 6216 patients (2280 males and 3936 females), consecutively acquired during the period July 2021 to March 2022, were analyzed. Identified cases of ECR were characterized by 3 evaluators regarding lesion height, circumferential spread, portal of entry proximity to root canal, stage, location, and width. RESULTS: In a total of 38 patients and 40 teeth, ECR cases demonstrated an incidence of 0.61%. The median age of the patients was 39 years. Prevalence of ERC was 0.78% among males and 0.50% among females. The most affected teeth were the maxillary incisors and canines. The most frequent characteristics of the lesion were: extension up to the cervical third (47.5%), more than 270° circumferential spread (42.55%), probable pulpal involvement (57.5%), progressive stage (65%), supracrestal (52.1%) and mesial (34.7%) localization of >1 mm in size (52.1%) portals of entry. Cases with greater longitudinal involvement also showed greater circumferential progression (P = .008). There was no association between portal of entry location and bone crest or ECR reparative phase (P = .42). Inter-rater agreement ranged from good to very good. No association between portal of entry and ECR progression was observed. CONCLUSIONS: ECR showed low prevalence in the Brazilian population, affecting mostly anterior maxillary teeth of patients within a wide age range. CBCT allowed characterization of ECR lesions with good interobserver agreement.

Clinical management of external cervical resorption: A systematic review.

This review investigated whether any therapeutic options influenced the outcome of treatment for teeth with external cervical resorption. Out of 870 articles identified by an electronic search, 60 clinical case reports and six case series were included. No randomised clinical trials were found. Risk of bias was assessed using Joanna Briggs Institute's tools. External surgical intervention was the preferred method of accessing the lesions. Removal of resorptive tissue was most often achieved mechanically. Bioactive endodontic cements were the preferred materials for restoring teeth. The outcome measures were based on clinical and radiographic parameters. Of the cases included in the review, no specific treatment approach had a superior outcome in relation to Heithersay's classification. Furthermore, due to the absence of randomised clinical trials, and the low level of evidence associated with case reports/case series, it was not possible to define the optimum clinical treatment for external cervical resorption.

Investigating the etiology of non-carious cervical lesions: Novel µCT analysis.

OBJECTIVES: The etiology of non-carious cervical lesions (NCCLs) is not fully understood, limiting treatment and prevention. Our aim was to evaluate the effect of mechanical loading and acid exposure on the cervical tooth region using a random spectrum loading model that simulates the nature of oral mastication. METHODS: Thirty extracted human premolars were divided into three experimental groups: 1) unloaded teeth immersed in acid (erosion group: Er), 2) loaded teeth immersed in acid (erosion with spectrum loading group: Er-SL), and 3) loaded teeth immersed in distilled water (spectrum loading group: SL). Random spectrum loading with loads ranging from 100 to 500 N was performed. All teeth were scanned using micro-CT. A novel 3D analysis was developed to evaluate the circumferential cervical tissue loss and regions under tension and compression. For parametric and non-parametric comparisons, one-way ANOVA with Tukey post-hoc tests and Kruskal-Wallis with Bonferroni post-hoc tests were used. RESULTS: A significant difference was observed in the circumferential volumetric loss, with the Er-SL exhibiting the greatest volume loss (p < 0.001). Moreover, in the loaded groups (Er-SL and SL), regions subjected to tension showed significantly greater loss (p < 0.001, p = 0.007) compared with regions subjected to compression. CONCLUSIONS: The novel high-resolution micro-CT analysis provided new insights into the etiology of NCCLs. The results suggested that the cumulative effect of mechanical loading and acid exposure may play a major role in NCCL formation. CLINICAL SIGNIFICANCE: This study investigates the etiology of NCCLs by examining the combined effects of occlusal loads and acid exposure on cervical tissue loss. Understanding the pathogenesis of NCCLs paves the way for the development of improved preventative measures and treatment strategies to prevent tooth structure degradation.

Comparative Study of Two Ways to Measure Root Trunk Length to Assess the Possibility of Crown Lengthening in Molars: Measuring Parallel to the Root Surface vs Parallel to the Tooth Axis

The aim of this study was to compare root trunk measurements taken parallel to the tooth axis (TA) to those taken parallel to the root surface (RS) in order to assess the decision-making implications of each method on crown-lengthening surgery. A total of 672 root trunks were measured via CBCT in two planes: TA and RS. The possibility of performing crown lengthening in each clinical situation based on the distance from the cementoenamel junction (CEJ) to the crestal bone (CB) after ostectomy (CEJ-CB) was judged and compared between groups. When RS was used as a reference point, the proportions of cases that judged crown lengthening to be possible were 83.63%, 59.08%, and 39.18% for CEJ-CB values of 4, 5, and 6 mm, respectively. When TA was used instead, those proportions decreased by 3.87% to 7.29%. The lingual root trunk of the lower first molar (LFL) with a CEJ-CB of 4 to 5 mm emerged as the most problematic area; here, the difference between reference planes occurred with one out of every six teeth. Within the limits of this study, utilizing TA for surgical crown-lengthening treatment planning is not ideal because it may lead to extraction of many savable teeth.

External Cervical Resorption: A Volumetric Analysis on Evolution of Defects over Time.

INTRODUCTION: The aim of this study was to assess the temporal evolution of external cervical resorption (ECR) defects using a volumetric quantification method. METHODS: Cone-beam computed tomographic (CBCT) images of patients diagnosed with ECR who chose not to receive treatment and attended recalls were collected. ECR defects were segmented in CBCT images at baseline and recall, and their volumes were quantified. The volumetric ratio of resorption defects/teeth was calculated. Three-dimensional classification of defects at baseline and recall and the prevalence of root surface perforations ≥1 mm were determined. The Wilcoxon matched pairs signed rank test, chi-square test, and linear regression models were used to analyze the data. RESULTS: Fifteen patients with 20 teeth diagnosed with ECR and an average recall time of 21 months were included. Nine (45%) teeth showed a change in 3-dimensional classification at recall. The volume of resorption defects (P = .0001) and the volumetric ratio of resorption defects/teeth (P = .0001) increased over time. The prevalence of root surface perforations ≥1 mm was higher at recall (n = 17, 85%) compared with baseline (n = 9, 45%) (P = .008). Linear regression models showed significant associations between the resorption defect volume at recall compared with baseline (P < .0001; 95% confidence interval, 0.053-0.081) and the volumetric ratio of resorption defects/teeth at recall compared with baseline (P < .0001; 95% confidence interval, 0.205-0.356). There was no association between the volume of resorption defects at recall with the length of the recall period, sex, or age (P > .05). CONCLUSIONS: When left untreated, ECR defects can increase in size and develop more root surface perforations. ECR has a dynamic nature, and its volumetric increase over time does not result from uniform/linear expansion of the defects.

Gingival landmarks and cutting points for gingival phenotype determination: A clinical and tomographic cross-sectional study.

BACKGROUND: This cross-sectional study assessed the role of gingival landmarks (GLs) and cutting points (CPs) for gingival phenotype (GP) determination. METHODS: Six maxillary anterior teeth (70 subjects) were evaluated using soft tissue cone-beam computed tomography (ST-CBCT). Gingival thickness was measured at different GLs: 1) tissue zone (gingival margin [GM], 1 and 2 mm apical to GM, cemento-enamel junction, above the bone crest); 2) bone zone (buccal bone crest [BBC], 1, 2, and 3 mm apical to BBC). CPs of 0.6, 0.8, 1.0, 1.2, and 1.5 mm were used to discriminate between thin and thick GP. The clinical determination of GP was made based on transparency of the periodontal probe (TRAN). RESULTS: The prevalence of thin and thick GP depended on the GL and CP. Considering the CP (1 mm), thin GP at the tissue zone ranged from 99% at the GM to 10.2% above the bone crest. In the bone zone, thick GP ranged from 28% at the BBC to 6% at 3 mm apical to the BBC. The predictability of a correct assessment of GP by TRAN compared with ST-CBCT was influenced by the GLs and CPs. A slight agreement (kappa <0.2) and low accuracy (area under the curve <0.7) were found between methods. CONCLUSIONS: The determination of thin and thick GPs is related to the gingival landmarks and CPs. Further studies are required for a well-defined treatment protocol considering different gingival landmarks in tissue and bone zones. An ST-CBCT may be useful for this purpose.

Progression of non-carious cervical lesions: 3D morphological analysis.

OBJECTIVES: This longitudinal study aimed to investigate morphologically and quantitatively the progression of non-carious cervical lesions (NCCLs) using a confocal laser scanning microscope (CLSM) and replica models. MATERIALS AND METHODS: The samples examined comprised sets of replicas annually obtained from 83 lesions in 16 participants over 3 to 5 years. All lesions were visually categorized as wedge-shaped, saucer-shaped, or mixed-shaped lesions. CLSM images of the replicas were analyzed in terms of axial depth, occlusogingival width (height) in the buccolingual cross-section, and estimated volume using a custom code of the image analysis software to estimate the progression of the NCCLs over time. The morphological characteristics of the NCCLs were also objectively divided into three groups according to the depth to height ratio (D/H ratio). Fisher's exact test and the Cochran-Armitage trend test were used for statistical analysis. RESULTS: Saucer-shaped lesions progressed mainly in height, whereas wedge-shaped lesions increased both in height and depth. Annual progression in depth and volume significantly increased as the D/H ratio increased. More than half of the NCCLs with a small D/H ratio progressed 50 µm or more in height, whereas none of them progressed more than 50 µm in depth. Annual progression in depth significantly increased as the lesion depth at baseline increased. CONCLUSIONS: Progression patterns significantly differed between NCCLs of different shapes. Most NCCLs progressed slowly in depth regardless of their shape. Moreover, NCCLs may progress through active and inactive stages.

The precision of gingival recession measurements is increased by an automated curvature analysis method.

BACKGROUND: The extent of gingival recession represents one of the most important measures determining outcome of periodontal plastic surgery. The accurate measurements are, thus, critical for optimal treatment planning and outcome evaluation. Present study aimed to introduce automated curvature-based digital gingival recession measurements, evaluate the agreement and reliability of manual measurements, and identify sources of manual variability. METHODS: Measurement of gingival recessions was performed manually by three examiners and automatically using curvature analysis on representative cross-sections (n = 60). Cemento-enamel junction (CEJ) and gingival margin (GM) measurement points selection was the only variable. Agreement and reliability of measurements were analysed using intra- and inter-examiner correlations and Bland-Altman plots. Measurement point selection variability was evaluated with manual point distance deviation from an automatic point. The effect of curvature on manual point selection was evaluated with scatter plots. RESULTS: Bland-Altman plots revealed a high variability of examiner's recession measurements indicated by high 95% limits of agreement range of approximately 1 mm and several outliers beyond the limits of agreement. CEJ point selection was the main source of examiner's variability due to smaller curvature values than GM, i.e., median values of - 0.98 mm- 1 and - 4.39 mm- 1, respectively, indicating straighter profile for CEJ point. Scatter plots revealed inverse relationship between curvature and examiner deviation for CEJ point, indicating a threshold curvature value around 1 mm- 1. CONCLUSIONS: Automated curvature-based approach increases the precision of recession measurements by reproducible measurement point selection. Proposed approach allows evaluation of teeth with indistinguishable CEJ that could be not be included in the previous studies.

Low torque is a risk factor for non-carious cervical lesions (NCCLs) in maxillary premolars.

PURPOSE: To determine the prevalence of non-carious cervical lesions (NCCLs) in maxillary premolars of different torques and simulated cervical stress profiles of the premolars under coincident loadings using finite element analysis (FEA). METHODS: The CBCT scans of 616 maxillary premolars from 154 subjects were retrospectively evaluated. The premolars were ascribed into low torque group (LTG) <-10.9°, medium torque group (MTG) -10.9° to -3.9°, and high torque group (HTG) >-3.9°, when the torque was referring to the occlusion plane. The prevalence of NCCLs in each group was evaluated. Then finite element models of a maxillary first premolar, its adjacent teeth and alveolar bone were established. The models were prepared with ANSYS software generating the premolars presenting different torques. The mastication scenario for the premolars in maximum intercuspation position was simulated. RESULTS: The prevalence of NCCLs was 15.7% in LTG, 7.9% in MTG and 5.5% in HTG. The prevalence of LTG was significantly higher than that of MTG (P< 0.05) and HTG (P< 0.01). As for FEA, the stresses at the buccal necks of the premolars basically increased with decrease of the torque. The tensile stress peaks were in the cemento-enamel junction in most premolars of the LTG, while in the middle of the crowns in premolars of MTG and HTG. CLINICAL SIGNIFICANCE: Low torque with excessive lingual inclination is a risk factor for NCCLs of maxillary premolars, and excessive tensile stress concentration in buccal necks during mastication may be responsible for that.

A Review of External Cervical Resorption.

External cervical resorption (ECR) is a relatively uncommon yet aggressive form of dental hard tissue destruction. It is initiated at the cervical aspect of the root surface and extends apicocoronally and circumferentially inside the dentin. Despite the large number of case reports and clinical studies that have investigated ECR, its etiology remains unclear. Recent advancements in clinical assessment measures, such as the use of cone-beam computed tomographic imaging, have provided additional insights into the nature of this lesion. This has facilitated the continued development and improvement of treatment methods for this condition. In this article, we provide an overview of the latest research pertaining to the etiology, histopathology, predisposing factors, diagnosis, classification, and treatment of ECR. Furthermore, we provide a summary of the different classification schemes for ECR and highlight the relevant therapeutic principles.

Multiple idiopathic cervical root resorption: Case report of an unusual presentation.

Idiopathic cervical root resorption (ICRR) is a rare condition involving the cemento-enamel junction of the teeth. Multiple idiopathic cervical root resorption (MICRR) involves several teeth with an unknown prevalence and aetiology. The resorptive lesions are often detected on routine radiographs or during clinical examination. The defects are often painless, hence they are usually diagnosed late and in an advanced stage when diagnosed clinically. The restoration of MICRR can be demanding with subsequent loss of the teeth affected. In this report, we describe the case of a 16-year-old female with MICRR, the therapeutic challenges and clinical burden for this young patient over a period of approximately 5 years.

Soft and Hard Tissue Remodeling after Endodontic Microsurgery: A Cohort Study.

INTRODUCTION: The aim of this study was to investigate the impact of the incision type, with or without a coronally repositioning flap (CRF), on soft tissue healing and crestal bone remodeling after endodontic microsurgery (EMS). METHODS: Clinical pictures and cone-beam computed tomography images from 47 patients (120 teeth) taken before surgery and at the follow-up appointment were included in this study. Clinical pictures were qualitatively evaluated by 2 endodontists for the gingival marginal level (GML) (recession, same position, or coronal root coverage), papillary height (same position/receded), and for presence/absence of scars for each tooth. Cone-beam computed tomography images were used to calculate the changes in the distance between the cementoenamel junction and the crestal bone level (CBL) between the preoperative and follow-up scans. Statistical analyses were performed to determine a correlation between patient-related factors (age, sex, tooth type, position, and presence/absence of a crown), incision techniques, and changes within the CBL. RESULTS: Gingival recession was more prevalent in mandibular teeth, molar teeth, and teeth that received intrasulcular or papilla-based incisions (P < .05). Scar formation was affected by the flap design (P < .05). CRF was the only technique resulting in coronal root coverage (P < .05). There were no changes observed in the papillary height between the various flap designs. There was also no statistically significant difference in the crestal bone height between the preoperative and follow-up scan measurements (P > .05). CONCLUSIONS: Soft tissue changes are evident after EMS and can be affected by the flap design selected, as well as the site being treated. Application of CRF can improve the position of GML after EMS. There are insignificant changes within the CBL at the facial aspect of the root after EMS.

The dimension and morphology of alveolar bone at maxillary anterior teeth in periodontitis: a retrospective analysis-using CBCT.

The morphology of the alveolar bone at the maxillary anterior teeth in periodontitis patients was evaluated by cone-beam computed tomography (CBCT) to investigate the distribution of alveolar defects and provide guidance for clinical practice. Ninety periodontitis patients and 30 periodontally healthy individuals were selected to determine the morphology of the alveolar bone at the maxillary anterior teeth according to the degree of bone loss, tooth type, sex and age. The differences in the dimensions between periodontitis patients and healthy individuals were compared, and the distribution of alveolar bone defects was analyzed. A classification system was established regarding the sagittal positions and angulations of the teeth. The buccal residual bone was thicker and the lingual bone was thinner in the periodontitis patients than in the periodontally healthy individuals, and there were differences between the different tooth types, sexes and age subgroups. The buccal undercut was close to the alveolar ridge, while fenestration was reduced and the apical bone height was higher in periodontitis patients than in periodontally healthy individuals. The apical bone height increased with the aggravation of bone loss and age. The proportions of different sagittal positions changed with the aggravation of bone loss. Moreover, the teeth moved more buccally regarding the positions of the maxillary anterior teeth. The morphology of the alveolar bone at the maxillary anterior teeth differed between periodontitis patients and healthy individuals, and the differences were related to the degree of bone loss, tooth type, sex and age.

Swept-source optical coherence tomographic observation on prevalence and variations of cemento-enamel junction morphology.

To investigate the prevalence of different patterns of cemento-enamel junction (CEJ) morphology under swept-source optical coherence tomography (SS-OCT). One hundred extracted human teeth were used consisting of incisors, premolars, and molars. Each sample was observed for every 500 µm circumferentially along CEJ and OCT images of the pattern were noted. Microscopic observations were done for the representative sample using confocal laser scanning microscope (CLSM) and transmission electron microscope (TEM). The OCT images exhibited four CEJ patterns: edge-to-edge (type I), exposed dentin (type II), cementum overlapping enamel (type III), and enamel overlapping cementum (type IV). The prevalence of CEJ patterns was further statistically considered for mesial, distal, buccal, and lingual surfaces. The real-time imaging by SS-OCT instantly determined CEJ morphology. CLSM and TEM observation revealed morphological features along CEJ, which corresponded to OCT images of CEJ anatomy. OCT results showed 56.8% of type I pattern predominantly found on proximal surfaces, followed by 36.5% of type II pattern on buccal and lingual surface, 6.4% of type III pattern, and 0.3% of type IV pattern. There was a significant difference in prevalence of CEJ patterns among different types of teeth, but there was no statistically significant difference among the four surfaces in each type of teeth. OCT is a non-invasive diagnostic tool to examine the CEJ patterns along the entire circumference. OCT observation revealed even minor dentin exposure that would need clinical and home procedures to prevent any symptoms.

Clinical and OCT outcomes of a universal adhesive in a randomized clinical trial after 12 months.

OBJECTIVES: To assess the performance of a universal adhesive in different application modes in non-carious cervical lesions clinically and by optical coherence tomography (OCT). METHODS: 55 adult patients with three non-carious cervical lesions (NCCL) each participated in the study. Lesions were restored with Scotchbond™ Universal (SBU, 3 M) applied in the self-etch (SBU-SE) and the selective-enamel-etch mode (SBU-SEE) in combination with Filtek™ Supreme XTE (3 M). OptiBond™ FL (OFL, Kerr) was used as a control. Restorations were clinically assessed (FDI criteria) after 14 days, 6 and 12 months and in parallel imaged by OCT (interfacial adhesive defects), starting immediately after filling placement. Cumulative failure rates (CFR) and means of interfacial adhesive defect were statistically evaluated. RESULTS: After 12 months, CFRs were lower in the SBU groups (0.0% each) than in the OFL group (20.0%, p = 0.001). Clinically, small marginal fractures occurred three times more often in the SBU-SE than in the SBU-SEE group (p = 0.001). Immediately after filling placement and at each reassessment OCT revealed more interfacial defects at enamel interfaces for SBU/SE compared to SBU/SEE and OFL (pi ≤ 0.044). At dentin/cement more defects were seen with OFL compared to SBU/SE and SBU/SEE (pi ≤ 0.001). Before restoration loss, more interfacial defects appeared compared to remaining restorations (pimmediately/6M = 0.132/0.002). CONCLUSIONS: Clinical evaluation and OCT imaging revealed higher interfacial integrity for SBU in both application modes compared to OFL. OCT detected interfacial bond failures prior to clinical deterioration or restoration loss. CLINICAL SIGNIFICANCE: Scotchbond Universal showed an equivalent or improved bonding performance compared to the reference adhesive. Selective enamel etching is recommended. The parameter interfacial adhesive defect seems to be a valuable predictor for evaluation of adhesive restoration systems.

Sex-related differences in the distance of the mental foramen to the cementoenamel junction in adults: a study using cone beam computed tomography.

Injury to the contents of the mental foramen (MF) can be minimized by using cone beam computed tomography (CBCT) to determine the exact location of the MF prior to surgical procedures. In this retrospective study, variations in the vertical position of the MF between adult men and women older than 18 years were investigated using CBCT. The distance between the superior border of the MF and the most apical aspect of the cementoenamel junction (CEJ) of the mandibular second premolar was measured. Among the randomly accessed CBCT records of 200 patients, 176 MF-CEJ measurements met the inclusion criteria. There was a statistically significant difference (P < 0.001) between the sexes in the location of the MF. The distance in women was shorter by an average of 2.00 mm, irrespective of the side of the mandible. Additionally, a within-sex asymmetry between right and left sides was observed; the asymmetry was significantly greater in men than in women (P < 0.05). Clinicians should be cognizant of the influence of the patient's sex on the vertical position of the MF and the presence of asymmetry in the position of the MF between the right and left sides of the mandible within the sex groups.

Is Hypoxia Related to External Cervical Resorption? A Case Report.

Despite the fact that external cervical resorption (ECR) is a well-known and rather frequently met condition, the driving force of this phenomenon still remains unclear. Recently, hypoxia has been linked to ECR. Thus, the aim of this work was to investigate the existence of hypoxia in ECR and hypothesize on its role at the time of extraction. This work is a case study of a tooth with ECR. ECR diagnosis was based on clinical and radiographic examination with cone-beam computed tomographic imaging. The extracted tooth was further analyzed by using nanofocus computed tomographic imaging and immunohistology. To investigate the 3-dimensional extent and pattern of ECR, in vivo cone-beam computed tomographic imaging and ex vivo nanofocus computed tomographic imaging were used. Different histologic stains were used to investigate the presence of a hypoxic environment and to gain a better insight into the involved cells, neuronal structures, and remodeling process during ECR. A higher distribution of hypoxia-inducible factor 1a-positive cells was found in the apical part of the resorption area when compared with the coronal area of the resorption. In addition, a similar distribution of hypoxia-inducible factor 1a-positive odontoblasts was observed in the pulp. Three-dimensional analysis of the calcification of the pulp revealed the formation of pulp stones in areas with higher hypoxia. Histology showed that remodeling during ECR can occur according to a layered pattern. This investigation confirms the presence of hypoxia in ECR and shows that there is a gradient of hypoxia within the ECR lesion and surrounding tooth structure. The hypoxic environment within the pulp is also indicated by the formation of pulp stones.