Comparison of stress distribution in partially and completely edentulous mandibles around splinted and non-splinted implant prostheses: A finite element study.

BACKGROUND: In some treatments using multiple dental implants, the implants are inserted in the bone with splinted or non-splinted implant prostheses. There are some reports about the influence of the splinted and non-splinted implants on stress distribution in the bone using the finite element method (FEM), and there is a controversy in the literature regarding whether the splinted or non-splinted implants prostheses reduce the stress generated on the implant-surrounding bone more efficiently. Additionally, the simple shape of the jaw bones with limited bone area was used for FEM analysis in many studies at the expense of accurate analysis. OBJECTIVE: The aim of this study was to evaluate the difference in stress distribution in the bone between the splinted and non-splinted implants, and between completely and partially edentulous mandibles. METHODS: The implants were inserted in the first premolar, second premolar, and first molar regions of the partial and complete mandibles, and the splinted and non-splinted crowns were attached to the implants. Vertical load (100 N) or oblique load (70 N, 30° from its long axis towards the lingual) was applied on the first premolar. RESULTS: When vertical load was applied to the partially edentulous mandible model, the stress was concentrated intensively on the cortical bone around the first premolar regardless of whether splinted or non-splinted implants were used. On the other hand, the vertical load applied to the completely edentulous mandible model caused the stress to be concentrated intensively on the cortical bone around the first premolar with non-splinted implants. With respect to the oblique load, the stress was concentrated intensively on the cortical bone around the first premolar only with the non-splinted implants, in both the partial and complete mandibles. CONCLUSION: This study shows the different stress distributions of the cortical bone around the implants between the partial and complete mandible. This indicates that the complete mandible should be used for the analysis of bone stress distribution around the implants using FEM.

Group 2 ITI Consensus Report: Prosthodontics and implant dentistry.

OBJECTIVES: Working Group 2 was convened to address topics relevant to prosthodontics and dental implants. Systematic reviews were developed according to focused questions addressing (a) the number of implants required to support fixed full-arch restorations, (b) the influence of intentionally tilted implants compared to axial positioned implants when supporting fixed dental prostheses (FDPs), (c) implant placement and loading protocols, (d) zirconia dental implants, (e) zirconia and metal ceramic implant supported single crowns and (f) zirconia and metal ceramic implant supported FDPs. MATERIALS AND METHODS: Group 2 considered and discussed information gathered in six systematic reviews. Group participants discussed statements developed by the authors and developed consensus. The group developed and found consensus for clinical recommendations based on both the statements and the experience of the group. The consensus statements and clinical recommendations were presented to the plenary (gathering of all conference attendees) and discussed. Final versions were developed after consensus was reached. RESULTS: A total of 27 consensus statements were developed from the systematic reviews. Additionally, the group developed 24 clinical recommendations based on the combined expertise of the participants and the developed consensus statements. CONCLUSIONS: The literature supports the use of various implant numbers to support full-arch fixed prostheses. The use of intentionally tilted dental implants is indicated when appropriate conditions exist. Implant placement and loading protocols should be considered together when planning and treating patients. One-piece zirconia dental implants can be recommended when appropriate clinical conditions exist although two-piece zirconia implants should be used with caution as a result of insufficient data. Clinical performance of zirconia and metal ceramic single implant supported crowns is similar and each demonstrates significant, though different, complications. Zirconia ceramic FDPs are less reliable than metal ceramic. Implant supported monolithic zirconia prostheses may be a future option with more supporting evidence.

Biomechanical aspects: Summary and consensus statements of group 4. The 5th EAO Consensus Conference 2018.

OBJECTIVES: The aim of the present publication was to report on the EAO Workshop group-4 discussions and consensus statements on the five reviews previously prepared. These reviews provided the scientific evidence on the effect of crown-to-implant ratio, on reconstructions with cantilevers in fully and partially edentulous patients, on biological and technical complications of tilted in comparison with straight implants, and on the effects of osseointegrated implants functioning in a residual dentition. MATERIAL AND METHODS: The group discussed, evaluated, corrected where deemed appropriate, and made recommendations to the authors regarding the following five reviews submitted: (a) Is there an effect of crown-to-implant ratio on implant treatment outcomes?; (b) Implant-supported cantilevered fixed dental rehabilitations in fully edentulous patients; (c) and in partially edentulous patients; (d) Biological and technical complications of tilted implants in comparison with straight implants supporting fixed dental prostheses; (e) What are the adverse effects of osseointegrated implants functioning among natural teeth of a residual dentition? Based on the five manuscripts and the discussion among the group as well as the plenum members, the major findings were summarized, consensus statements were formulated, clinical recommendations were proposed, and areas of future research were identified. RESULTS: Crown-to-implant ratios ranging from 0.9 to 2.2 did not influence the occurrence of biological or technical complications also in single-tooth restorations. Reconstructions with cantilevers for the rehabilitation of fully and partially edentulous jaws showed high implant and reconstruction survival rates. In contrast, the rate of complications-in particular associated with veneering material-was high during the observation period of 5-10 years. The data reported were primarily derived from studies with high risk of bias. The data for single-implant reconstructions were small. There was no evidence that distally tilted implants were associated with higher failure rates and increased amounts of marginal bone loss. The data supporting these findings, however, were at high risk of bias and frequently incompletely reported. Frequent positional changes occurred between the natural teeth and the implant-supported restorations. These changes were more pronounced in younger individuals, and even though they were reduced with age, they still occurred in adult patients. Even though these changes were frequent, potential implications for the patient are unclear. CONCLUSIONS: The use of single-tooth restorations with crown-to-implant ratio in between 0.9 and 2.2 may be considered a viable treatment option. Multiunit reconstructions with cantilevers are a viable treatment option in fully and partially edentulous patients. Clinicians and patients should be aware, however, that complications are frequent and primarily related to resin material used for veneering. There is some evidence that tilting an implant does affect stability of the implant and the surrounding bone. Treatment options to tilted implants should carefully be considered, as the effect on soft tissues and on prosthesis behavior is poorly reported for tilted implants. Positional changes in the dentition in relation to implant-supported restorations occur frequently. The patient should be informed about the possible need for a treatment related to these changes in the long term.

The quality of fixed prosthodontic impressions: An assessment of crown and bridge impressions received at commercial laboratories.

BACKGROUND: The authors evaluated and quantified clinically detectable errors commonly seen in impressions sent to commercial laboratories and determined possible relationships between finish line errors and other factors involved. METHODS: The authors visited 3 large and 1 small commercial dental laboratories over a 12-month period. Three calibrated examiners evaluated the impressions. The examiners evaluated all impressions for errors by using ×2.5 magnification loupes under ambient room lighting without the aid of additional illumination. RESULTS: The authors evaluated 1,157 impressions; 86% of the examined impressions had at least 1 detectable error, and 55% of the noted errors were critical errors pertaining to the finish line. The largest single error categories evaluated were tissue over the finish line (49.09%), lack of unprepared stops in dual-arch impressions (25.63%), pressure of the tray on the soft tissue (25.06%), and void at the finish line (24.38%). The factors blood on the impression (odds ratio, 2.31; P < .001) and tray type (odds ratio, 1.68; P < .001) were associated significantly with finish line errors. CONCLUSIONS: Marginal discrepancies made up the largest category of error noted in impressions evaluated. The authors noted an increase in errors at the finish line with dual-arch impression techniques and in the presence of blood. PRACTICAL IMPLICATIONS: Dentists have ethical, moral, and legal obligations bestowed on them by the profession and need to evaluate critically the work they send to laboratories. The authors strongly recommend an improvement in technique and reviewing of all impressions and working casts.

Effect of Connector Design on Fracture Resistance in Zirconia-based Fixed Partial Dentures for Upper Anterior Region.

The purpose of this study was to investigate the influence of the cross-sectional form and area of the connector on fracture resistance in three-unit zirconia fixed partial denture (FPD) frameworks for the upper anterior region. Sixty FPD framework specimens were fabricated using the CAD/CAM system. The cross-sectional form (Type I, II, or III) and area (9.0, 7.0, 5.0, or 3.0 mm(2)) of the connectors differed. The specimens were fixed to a jig capable of applying a load axially to the abutment teeth at an angle of 135 degrees. Each specimen was subjected to fracture load measurements using a universal testing machine and cross-sectional microscopic examination. Fracture load fell significantly with a decrease in cross-sectional area (p <0.01). In terms of cross-sectional form, an isosceles triangle with a gingival base yielded the highest fracture load. These results suggest that the connector of a three-unit zirconia-based FPD framework for the upper anterior region should be triangular, have a gingival base, sufficient height in the loading direction, and a cross-sectional area of >5.0 mm(2).

Clinical Practice Guidelines for Recall and Maintenance of Patients with Tooth-Borne and Implant-Borne Dental Restorations.

PURPOSE: To provide guidelines for patient recall regimen, professional maintenance regimen, and at-home maintenance regimen for patients with tooth- and implant-borne removable and fixed restorations. METHODS: The American College of Prosthodontists (ACP) convened a scientific panel of experts appointed by the ACP, American Dental Association (ADA), Academy of General Dentistry (AGD), and American Dental Hygienists Association (ADHA) who critically evaluated and debated recently published findings from 2 systematic reviews on this topic. The major outcomes and consequences considered during formulation of the clinical practice guidelines (CPGs) were risk for failure of tooth- and implant-borne restorations. The panel conducted a round table discussion of the proposed guidelines, which were debated in detail. Feedback was used to supplement and refine the proposed guidelines, and consensus was attained. RESULTS: A set of CPGs was developed for tooth-borne restorations and implant-borne restorations. Each CPG comprised of 1) patient recall; 2) professional maintenance, and 3) at-home maintenance. For tooth-borne restorations, the professional maintenance and at-home maintenance CPGs were subdivided for removable and fixed restorations. For implant-borne restorations, the professional maintenance CPGs were subdivided for removable and fixed restorations and further divided into biological maintenance and mechanical maintenance for each type of restoration. The at-home maintenance CPGs were subdivided for removable and fixed restorations. CONCLUSION: The clinical practice guidelines presented in this document were initially developed using the 2 systematic reviews. Additional guidelines were developed using expert opinion and consensus, which included discussion of the best clinical practices, clinical feasibility and risk-benefit ratio to the patient. To the authors' knowledge, these are the first CPGs addressing patient recall regimen, professional maintenance regimen, and at-home maintenance regimen for patients with tooth-borne and implant-borne restorations. This document serves as a baseline with the expectation of future modifications when additional evidence becomes available.

Credibility and Confidence in Your Dental Laboratory Work-How Quality Assurance Systems Can Be Used in the Manufacturing of Individual Custom-Made Dental Devices.

Manufacturing of custom-made dental devices such as removable dentures, fixed prosthodontics and orthodontics are subject to the requirements of the Medical Devices Directive (MDD). Many dental laboratories often enhance these requirements by implementing quality assurance procedures that then provide enhanced consistency. This paper provided a personal view of some of the systems currently being used in dental laboratories to provide a quality assured product and associated issues.

Axial Implants in Immediate Function for Partial Rehabilitation in the Maxilla and Mandible: A Retrospective Clinical Study Evaluating the Long-Term Outcome (Up to 10 Years).

BACKGROUND: There is a need of long-term studies evaluating the outcome of fixed partial rehabilitations (FPR) supported by implants in an immediate function protocol. The aim of this retrospective cohort study was to investigate the long-term outcome of FPR supported by implants placed in immediate function. METHODS: One hundred ninety-nine patients were consecutively included, between 1998 and 2010, with 481 implants supporting 213 FPR (maxilla: 87 and mandible: 126). Primary outcome measures were implant and FPR survival rates; secondary outcome measures were marginal bone levels at 5 and 10 years and incidence of mechanical and biological complications. RESULTS: The cumulative implant survival rate was 98.5% and 99.0% after 5 years and 92.7% and 96.7% after 10 years, using the patient and implant as unit of analysis, respectively. No prostheses were lost. Average (SD) marginal bone levels were 1.79 (0.93) and 1.89 mm (0.81 mm) at 5 and 10 years of follow-up. Mechanical complications occurred in 43 patients (21.6%), biological complications occurred in 12 patients (6%), and 16 implants (3.3%) up to the 10 years follow-up. CONCLUSIONS: FPR supported by immediate function implants in both jaws is a viable and safe treatment alternative.

Electronic laboratory quality assurance program: A method of enhancing the prosthodontic curriculum and addressing accreditation standards.

STATEMENT OF PROBLEM: An electronic quality assurance (eQA) program was developed to replace a paper-based system and to address standards introduced by the Commission on Dental Accreditation (CODA) and to improve educational outcomes. This eQA program provides feedback to predoctoral dental students on prosthodontic laboratory steps at New York University College of Dentistry. PURPOSE: The purpose of this study was to compare the eQA program of performing laboratory quality assurance with the former paper-based format. MATERIAL AND METHODS: Fourth-year predoctoral dental students (n=334) who experienced both the paper-based and the electronic version of the quality assurance program were surveyed about their experiences. Additionally, data extracted from the eQA program were analyzed to identify areas of weakness in the curriculum. RESULTS: The study findings revealed that 73.8% of the students preferred the eQA program to the paper-based version. The average number of treatments that did not pass quality assurance standards was 119.5 per month. This indicated a 6.34% laboratory failure rate. Further analysis of these data revealed that 62.1% of the errors were related to fixed prosthodontic treatment, 27.9% to partial removable dental prostheses, and 10% to complete removable dental prostheses in the first 18 months of program implementation. CONCLUSIONS: The eQA program was favored by dental students who have experienced both electronic and paper-based versions of the system. Error type analysis can yield the ability to create customized faculty standardization sessions and refine the didactic and clinical teaching of the predoctoral students. This program was also able to link patient care activity with the student's laboratory activities, thus addressing the latest requirements of the CODA regarding the competence of graduates in evaluating laboratory work related to their patient care.

[Loading and strength of single- and multi-unit fixed dental prostheses 2. Strength]. / Op kronen en bruggen uitgeoefende krachten en het weerstaan daarvan 2. Mechanische belastbaarheid.

The ultimate strength of a dental prosthesis is defined as the strongest loading force applied to the prosthesis until afracture failure occurs. Important key terms are strength, hardness, toughness and fatigue. Relatively prevalent complications of single- and multi-unit fixed dental prostheses are porcelain and ceramic fractures. Afactor which also plays a role is the functional loading force from the entire orofacial system. With respect to the strength of multi-unit fixed dental prostheses, the length of the arch span between the abutment teeth, the pontic with the connectors and the possible cantilevers are the critical components. Components of the configuration ofabutment teeth of single- and multi-unit fixed dental prostheses which are relevant for its strength are the convergence angle and the design of(the area above) the (cervical) outline. Finally, the thickness of the porcelain or the ceramic (veneers) ofmetal-ceramic and all-ceramic single- and multi-unit fixed dental prostheses is of importance.

[Aftercare for durability and profitability of single-unit and multi-unit fixed dental prostheses]. / Nazorg voor dutrzaamheid en profijtelijkheid van kronen en bruggen.

An important aim ofa treatment with single-unit and multi-unit fixed dental prostheses is a durable and profitable treatment outcome. That requires aftercare, too. First, the frequency of routine oral examinations should be assessed, using an individual risk profile. The objectives of the routine oral examinations are the prevention and, when necessary, the treatment of pathological conditions and complications. With regard to prevention, attention should be paid to information and instruction, oral biofilm and calculus, non-functional activities, hard tooth tissues, periodontal and peri-implant tissues, and saliva. Subsequently, it can be determined whether the intended durability and profitability have been achieved or can still be achieved, whether or not through indicated adjustments. Special attention should be paid to endodontically treated teeth. Restorative, repair or replacement treatments may be indicated in case ofcomplications, such as loose single- or multi-unitfixed dental prosthesis, fracture of a fixed dental prosthesis unit, lost tooth pulp vitality, tooth root fracture, and implant or implant abutment problems.

The Burdens in Prosthetic Dentistry Questionnaire (BiPD-Q): development and validation of a patient-based measure for process-related quality of care in prosthetic dentistry.

PURPOSE: To develop and validate an instrument for the assessment of patient-based measures of process-related quality of care in prosthodontic patients. MATERIALS AND METHODS: In this nonrandomized study, the new Burdens in Prosthetic Dentistry Questionnaire (BiPD-Q) was developed in two steps using a total of 128 prosthodontic patients in a mixed-method approach, combining quantitative-qualitative methodologies. First, the item pool for the instrument was created using semistructured interviews and a group of experts in prosthodontics. This resulted in a preliminary version of the questionnaire. Second, an assessment of redundancy, completion rates, face validity, difficulty, and distribution of the core set of the items was performed. The final version of the BiPD-Q had psychometric core properties (reliability and validity) evaluated. RESULTS: The BiPD-Q consisted of 25 items. Reliability was satisfactory (Cronbach's alpha = .87). The mean score of all items of the BiPD-Q was significantly correlated with mean perceived burdens during treatment as rated by the clinician (r = 0.26; P < .01) and with overall satisfaction with the treatment procedures as rated by patients (r = .31; P < .01), indicating sufficient convergent validity. CONCLUSION: A reliable and valid instrument for the assessment of patient-based process-related quality of care in prosthodontics has been developed. The BiPD-Q allows comparisons of different dental procedures within a treatment course and of different treatment providers. The use of this type of questionnaire appears to be a valuable tool for dental health care research. The outcomes of research using the BiPD-Q may result in a more pleasant treatment experience for future patients.

Improving the fit of implant prosthetics: an in vitro study.

PURPOSE: Accurate and passive fit between a prosthesis and its supporting implants has been considered a prerequisite for successful long-term osseointegration. The objective of this in vitro study was to evaluate the strain development during tightening of a five-unit screw-retained superstructure constructed using five different methods. MATERIALS AND METHODS: Five-unit screw-retained fixed partial prostheses (n = 25) were fabricated on three implants embedded in an epoxy resin block using five different methods: (1) cobalt-chromium (Co-Cr), plastic cylinders, one-piece cast; (2) Co-Cr, plastic cylinders, framework sectioned, preceramic laser-welding soldering; (3) gold-platinum (Au-Pt), gold cylinders, one-piece cast; (4) Au-Pt, gold cylinders, framework sectioned, preceramic laser-welding soldering; (5) Co-Cr, one-piece cast, and cementation to "passive abutments" (Southern Implants) after final finishing and polishing. Strain gauges (SG) were attached to the fixed partial prosthesis (FPP) and to the resin block to measure the stress created during screw tightening. RESULTS: The combination of Co-Cr alloy and plastic cylinders in a one-piece cast showed such an inadequate fit among the fabricated methods that this group was excluded from the remainder of the experiment. Specimens of Au-Pt cast on gold cylinders in one piece showed higher strain development than the other groups used in this study, with strains ranging from 223.1 to 2,198.1 Μm/m. Sectioning and soldering significantly improved the overall fit. FPPs of Co-Cr in a one-piece cast cemented to "passive abutments" produced the best level of fit, with the least strain development in the prosthesis and the resin block (59 to 204.6 Μm/m). CONCLUSION: Absolute fit of superstructures on implants is not possible using conventional laboratory procedures. Cementing FPPs onto prefabricated cylinders directly onto the implants significantly reduces strain development compared to the other fabrication methods.

Accuracy and reliability of methods to measure marginal adaptation of crowns and FDPs: a literature review.

PURPOSE: To review methods used to investigate marginal adaptation of crowns and fixed dental prostheses (FDPs), and to discuss testing variables employed and their influence on results. METHODS: Online libraries including PubMed, Scopus, and Ovid were searched for articles evaluating the marginal adaptation of crowns and FDPs using a combination of the keywords: "marginal accuracy," "marginal fit," "marginal gap," "marginal discrepancy," "fitting accuracy," "crown," and "FPD." Peer-reviewed publications in English in the period 1970 to December 2011 were collected, evaluated by their abstract, and included if they met the inclusion criteria. The criteria involved studies evaluating marginal adaptation of crowns and FDPs through clear experimental protocols. Exclusion criteria involved longitudinal prospective and retrospective clinical evaluations, studies using subjective tactile sensation, and other predefined criteria. RESULTS: A total of 277 papers were identified; only 183 met the inclusion criteria. Direct view technique was used by 47.5% of the articles followed by cross-sectioning (23.5%), and impression replica (20.2%) techniques. The marginal gap values reported by these techniques varied among individual crown systems and across different systems because of variations in study type (in vivo vs. in vitro), sample size and measurements per specimen, finish line design, and stage at which the marginal gap was measured. CONCLUSION: There was a substantial lack of consensus relating to marginal adaptation of various crown systems due to differences in testing methods and experimental protocols employed. Direct view technique was the most commonly used method of reproducible results. Also, conducting an experimental set-up of testing a minimum of 30 specimens at 50 measurements per specimen should produce reliable results. Additionally, using a combination of two measurement methods can be useful in verification of results.

Effect of veneering technique on the fracture resistance of zirconia fixed dental prostheses.

To compare the fracture resistance of zirconia 3-unit posterior fixed dental prostheses (FDPs) frameworks veneered with different veneering materials and techniques before and after artificial ageing. Forty-eight zirconia 3-unit FDPs, representing a missing first molar, were adhesively cemented on human teeth. The zirconia frameworks were randomly distributed according to the veneering materials and techniques into three groups, each containing 16 samples: group LV (layering technique/Vintage ZR), group LZ (layering technique/ZIROX) and group PP (CAD/CAM and press-over techniques/PressXZr). Half of each group was artificially aged through dynamic loading and thermocycling to simulate 5 years of clinical service. Afterwards, all specimens were tested for fracture resistance using compressive load. An analysis of variance (anova) was used to assess the effect of veneering ceramic and artificial ageing on fracture resistance (P < 0·05). Except for one minor cohesive chipping in group LV1, all specimens survived artificial ageing. The mean fracture resistance values (in Newton) of different non-aged (± s.d.)/aged (± s.d.) groups were as follows: LV0 2034 (± 401)/LV1 1625 (± 291); LZ0 2373 (± 718)/LZ1 1769 (± 136); and PP0 1959 (± 453)/PP1 1897 (± 329). Artificial ageing significantly reduced the fracture resistance in groups veneered with the layering technique (P < 0·05), whereas no significant effect was found in specimens veneered with the CAD/CAM and press-over techniques. All tested systems have the potential to withstand occlusal forces applied in the posterior region. The combination of the CAD/CAM and press-over techniques for the veneering process improved the overall stability after artificial ageing, relative to the layering technique.

Oral hygiene and gingival health in patients with fixed prosthodontic appliances--a 12-month follow-up.

The aim of this study was to assess and observe the oral hygiene and gingival condition in patients before and after fixed prosthodontic therapy through a 12-month period in combination with oral hygiene instructions. It was also analysed how factors, such as type of fixed prosthodontic appliance, constructive material, the position of a fixed partial denture (FPD) in the mouth, age and gender influenced oral hygiene. The dental arches were divided into three segments each and teeth and gingiva were examined using the Plaque and Gingiva Index by Silness and Löe, and for the mineralized deposits assessment the Calculus Index by Green and Vermillion was employed. The preliminary examination was conducted before the prosthodontic therapy, and the reexaminations were carried out 14 days, 1, 6 and 12 months after crown and/or FPD placement. A total of 93 subjects from the original study group of 146 patients attended all clinical examinations, while the rest was excluded. The sample consisted of 60 women, 33 men at age between 21 and 95 (average 51.8). A total of 39 patients had single crowns (C), 50 FPDs and 5 C+FPD. The frequency of plaque found during the preliminary visit was higher than that found in the other periods (p < 0.001). Patients with C showed better oral hygiene levels than patients with FPDs or C+FPDs (p = 0.001). Our results revealed no significant difference in oral hygiene status among patients with FPDs made of different materials (p = 0.083). The worst hygiene levels were found in patients with fixed prosthodontic appliances in both jaws (p = 0.012). Younger patients showed better hygiene levels than the older ones (p = 0.002). Our research showed that appropriate educational and motivational measures can lead to improved oral hygiene, even after FPD placement. Presumably, the oral health in a group of adult patients can be kept acceptable by providing a prophylactic oral hygiene program.

Clinical performance of long-span zirconia frameworks for fixed dental prostheses: 5-year results.

The purpose of this prospective cohort study was to assess the performance of tooth-supported, long-span, zirconia fixed dental prostheses (FDPs). Thirty FDPs with span lengths from 36 to 46 mm (mean 40·33 mm), with 4-7 units and with connector dimensions ∼9 mm(2) were inserted (19 in the posterior region, 11 including anterior teeth) using glass-ionomer cement. The performance of the FDPs was assessed (aesthetic evaluation, failures, hypersensitivity/tooth vitality, secondary caries, pocket depth, decementation, and chipping) at baseline and after 5 years. Cox regression analysis was performed to identify risk factors. There were 16 failures after 5 years. Framework fracture occurred for two FDPs, four FDPs had to be re-cemented, one abutment tooth had to be treated endodontically, one abutment tooth fractured and cohesive failure of the veneer occurred for eight. Four FDPs had to be replaced, so survival was 82%. The aesthetics were rated as excellent by the patients at baseline and good at the 5-year recall. Cox regression analysis showed that both length [P = 0·05, exp(B) = 1·22] and location [P = 0·019, exp(B) = 4·09] of the FDP were risk factors for failure. Compared with the previously published 2-year results, the incidence of complications increased dramatically. Additionally, it was shown that long-span FDPs in the molar region are at greater risk of failure than FDPs in the anterior region.

The influence of master cast technique on the cast precision of implant-retained fixed prostheses.

The aim of this study was to evaluate the precision of three different mold filling techniques in order to obtain a cast simulating a three-unit, implant-retained, fixed prosthesis. Thirty casts (n = 10) were obtained using three different mold filling techniques. Group 1 used a unique fulfillment technique, Group 2 used a two-step fulfillment technique, and Group 3 used a latex cylinder technique. Using a metallic matrix, a titanium substructure was created to simulate a three-unit fixed prosthesis used as reference to evaluate the marginal misfit and tension forces in each cast. The vertical misfit was measured by an optical microscope with an increase of 120X and by an analysis unit using the one-screw test. The tension was quantified using strain gauges. The strain results showed a statistical difference between Group 3 and the other groups. The Tukey test showed no difference between the different treatment groups (p = 0.05). All three techniques were deemed efficient; however, considering that the cylinder latex technique induced less force toward the implants, it is the preferable technique for daily clinical practice.

Survival and complications of zirconia-based fixed dental prostheses: a systematic review.

STATEMENT OF PROBLEM: Evidence is limited on the efficacy of zirconia-based fixed dental prostheses. PURPOSE: The purpose of this systemic review was to assess zirconia-based FDPs in terms of survival and complications. MATERIAL AND METHODS: Searches performed in PubMed databases were enriched by hand searches to identify suitable publications. The keywords used were: "zirconia" and "fixed dental prosthesis," "zirconia" and "crown," "zirconia" and "fixed partial denture" and "humans," "zirconia" and "crown" and "humans," "crown" and "all-ceramics," and "fixed partial denture" and "all-ceramics". Titles and abstracts were read to identify literature that fulfilled the inclusion criteria. Only peer reviewed clinical studies published in the English language from January 1999 through June 2011 were included. RESULTS: Twelve clinical studies based on zirconia, framework design, and porcelain veneering technique met the inclusion criteria. Of the studies identified, 1 was a randomized clinical study with 3-year follow-up results; the others were cohort prospective studies. Clinical complications included chipping of veneering porcelain, abutment failure, and framework fracture. One study investigated pressed ceramics as the veneering material and found no chipping of veneering porcelain after 3 years. CONCLUSIONS: Short term clinical data suggest that zirconia-based fixed dental prostheses may serve as an alternative to metal ceramic fixed dental prostheses in the anterior and posterior dentition.