The role of orthodontics in the management of tooth wear.

Pathological tooth wear is a dental problem that affects all age groups and appears to be increasing in prevalence. A subset of these patients may benefit from a combination of orthodontic and restorative care which will be discussed in this article. Orthodontics can help to create the necessary vertical, anterior-posterior and mesio-distal space for restorative work, reducing the need for tooth reduction and lessening the biological costs of restorative care, helping to reposition the gingival margins where this impacts upon aesthetics, as well as correcting co-existing malocclusion.

The survival and clinical performance of anterior composite resin restorations and posterior indirect and cast restorations used to treat generalised tooth wear.

Objective To evaluate the survival and clinical performance of restorative materials used in the rehabilitation of generalised severe tooth wear within a UK NHS postgraduate teaching hospital.Methods The clinical performance of 527 restorations on 20 patients with generalised severe tooth wear was reviewed after a mean period of five years. Anterior teeth were restored with direct composite resin and posterior teeth with indirect restorations. The study used the modified United States Public Health Service criteria for restoration assessment. Survival of the restorations was analysed using Kaplan-Meier survival curves, the log-rank test and the Cox proportional hazards regression analysis.Results The sample included 20 participants: 13 men and 7 women, with a median age of 51.8 years (range: 33-73 years). The median survival time for all restorations was 11.3 years when major failures were considered and 5.9 years for restorations when all types of failure were considered. A median survival time of 5.9 years for composite resin restorations and over seven years for cast restorations was found when considering all failures. Composite resin restorations commonly failed as a result of fracture, wear and marginal discolouration. Factors significantly influencing restoration survival were the material used, aetiology, incisal relationship and tooth location. The biological complications associated with this treatment regime were rare. Patient satisfaction remained generally high, with greatest dissatisfaction related to treatment time.Conclusions The use of anterior composite resin with posterior indirect restorations to treat generalised severe tooth wear is a viable treatment modality with very few major complications.

No-prep dentistry using the Simple Orthodontic Extrusion (SOE) technique to create occlusal space. Illustration in tooth wear and resin-bonded bridges

In restorative dentistry, the lack of occlusal space may lead to the mutilation of healthy tissue in order to provide sufficient space for the restorative material. Noprep dentistry can be achieved by placing high-bite restorations, followed by Simple Orthodontic Extrusion (SOE) of other teeth to close the created open bite. This rapid, partial orthodontic treatment is well accepted by patients as it can be easily performed using simple buttons, and it takes only a few weeks to reestablish occlusal contacts. The SOE technique is a further development of the Dahl concept. It has the advantages without the disadvantages. Two applications of this technique are presented in this article: the treatment of the severe wear of anterior teeth with no-prep palatal veneers made of Polymer-infiltrated Ceramic Network (PICN, 'hybrid ceramic') material and the realization of no-prep zirconia resin-bonded bridges (RBBs) to replace missing lateral incisors. An original 3D-printed resin guide for correctly positioning RBBs and facilitating the removal of excess composite cement is also presented. This work highlights the considerable advantages of multidisciplinary collaboration in the field of minimally invasive dentistry.

Evidence-based clinical management of localised tooth wear and a repeatedly dislodged posterior crown utilising the Dahl Concept.

This clinical case report demonstrates the use of the Dahl Concept in the management of the repeated dislodgement of a posterior full coverage crown associated with a reduced restorative space. The described technique harnesses the addition of resin composite and a temporarily cemented provisional full coverage crown to create sufficient restorative space for the cementation of a definitive posterior full coverage crown restoration at the six-month review.

Prospective case series study on the survival rates of occlusal polymethyl methacrylate veneers as a semipermanent therapy in patients with severe pathologic tooth wear.

OBJECTIVES: To evaluate the survival rate of minimally invasive semipermanent occlusal polymethyl methacrylate (PMMA) onlays/veneers in previous temporomandibular disorder (TMD) patients with severe tooth wear and with a loss of vertical dimension after up to 7 years. METHOD AND MATERIALS: This case series was designed as a follow-up evaluation with consecutive patient recruitment. All patients bearing the indication for this kind of rehabilitation were treated by the same clinician using the same adhesive methodology. The study included 22 patients (3 men/19 women), with a mean ± SD age of 50.7 ± 11.6 years. Controls followed within the first 4 weeks (and subsequently as required). Failure criteria included damage by fracture, chipping, and retention loss. Survival rates were determined based on the Kaplan-Meier analysis. RESULTS: 328 semipermanent occlusal/incisal veneers were included (142 maxillary/186 mandibular teeth). Almost 80% of the restorations were in place and in function when starting the follow-up treatment after 180 days; failures predominantly occurred within the first 3 to 6 months but proved reparable. Depending on the patients' priorities, scheduled replacements followed successively, and more than 65% did not show repair or any renewal needs for more than 360 days. CONCLUSION: Within the limitations of this study the survival rates of occlusal veneers made of PMMA were sufficiently high to allow for consecutive treatment of the respective teeth by means of permanent restorations while preserving the restored vertical dimension. In patients with severe tooth wear and a TMD history, semipermanent restorative therapy with occlusal PMMA onlays/veneers would seem a noteworthy option.

Resistance of CAD/CAM composite resin and ceramic occlusal veneers to fatigue and fracture in worn posterior teeth: A systematic review.

Severe tooth wear is related to substantial loss of tooth structure, with dentin exposure and significant loss (≥1/3) of the clinical crown. The objective of this systematic review was to summarize and analyze the scientific evidence regarding the mechanical performance of computer-aided design/computer-aided manufacturing (CAD/CAM) composite resin and CAD/CAM lithium disilicate ceramic occlusal veneers, in terms of fatigue and fracture resistance, on severely worn posterior teeth. Currently, occlusal veneers are an alternative for treating worn posterior teeth. Although scientific evidence demonstrates the good performance of lithium disilicate occlusal veneers, there are less brittle materials with a modulus of elasticity more similar to dentin than ceramics, such as resin CAD/CAM blocks. Therefore, it is important to identify which type of material is best for restoring teeth with occlusal wear defects and which material can provide better clinical performance. This review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A comprehensive search of the PubMed, Embase, Web of Science, Scopus, Cochrane, OpenGrey, Redalyc, DSpace, and Grey Literature Report databases was conducted and supplemented by a manual search, with no time or language limitations, until January 2022. We aimed to identify studies evaluating the fatigue and fracture resistance of CAD/CAM composite resin and ceramic occlusal veneers. The quality of the full-text articles was evaluated according to the modified Consolidated Standards of Reporting Trials (CONSORT) criteria for in vitro studies, and 400 articles were initially identified. After removing duplicates and applying the selection criteria, 6 studies were included in the review. The results demonstrated that the mechanical performance of CAD/CAM composite resin occlusal veneers is comparable to that of CAD/CAM lithium disilicate occlusal veneers in terms of fatigue and fracture resistance.

Intraoral wear of PICN CAD-CAM composite restorations used in severe tooth wear treatment: 5-year results of a prospective clinical study using 3D profilometry.

OBJECTIVES: To evaluate, in a prospective clinical study over 5 years with ex vivo 3D profilometry analyses, the intraoral wear of Polymer-Infiltrated Ceramic Network (PICN) CAD-CAM composite restorations used in severe tooth wear treatment with the One-Step No-Prep technique. METHODS: 192 PICN (Vita Enamic) restorations on molars and premolars were included in a prospective clinical study involving patients treated according to the One-step No-prep protocol (n = 7). All patients showed clinical signs of bruxism. Replicas of restorations on molars and premolars were realized at each evaluation time (baseline and then every year up to 5 years) and scanned to perform 3D profilometry. Baseline and recall scans were superimposed with Geomagic Control software. The mean material wear was calculated for the full occlusal area (FOA) and for the occlusal contact area (OCA), respectively. Clinical evaluation of restorations was performed at recall. RESULTS: At 5 years, the estimated mean material wear for FOA was inferior to the accuracy threshold of the profilometry measurement chain. For OCA, the estimated mean wear of the material was - 27.97 µm. This material wear was shown to be significantly influenced by time (p < 0.0001) and patient (p = 0.026), while the type of tooth (molar or premolar) had no influence. At 5 years, the survival and the success rates of restorations were 99.48% and 90.62%, respectively. SIGNIFICANCE: The PICN material exhibits a low wear process in the treatment of severe tooth wear despite the presence of clinical signs of bruxism, and it constitutes a suitable material for the One-step No-prep technique.

Tooth surface loss: causes, management, and prevention.

OBJECTIVES: Tooth wear, also referred to as tooth surface loss, occurs due to causes other than caries. This involves the loss of hard tissues, namely enamel, dentin, and/or cementum. Types of tooth wear/tooth surface loss are abrasion, abfraction, attrition, and erosion. These multifactorial conditions can be caused by factors such as lifestyle, diet, or even habits, and may not be symptomatic. The focus of this article is to provide clinicians with detailed examples and explanations of the causes of tooth loss to aid in early diagnosis. Through early identification, the preventive measures outlined can be implemented to avoid excessive tooth wear. The provision of a treatment flowchart and general treatment recommendations aims to help clinicians determine when to restore these lesions and the most appropriate treatment measures for the four types of wear. METHOD AND MATERIALS: The PubMed (MEDLINE) search engine was used to gather information on teeth restricted to a 5-year period (26 August 2018 to 25 July 2022). Only English-language studies and reviews with the best balance of sensitivity and specificity were considered. A Boolean search of the PubMed dataset was implemented to combine a range of keywords: ("tooth wear" OR tooth attrition OR tooth erosion OR tooth abrasion OR tooth abfraction). Additional articles were selected through Google Scholar. RESULTS: By this process, many articles and studies were obtained, and the 48 most relevant published studies were chosen and used in the current review. CONCLUSION: Tooth wear affects an increasing number of individuals and can have detrimental effects physically, mentally, and emotionally. It is important to stress early diagnosis and management of tooth wear through monitoring, prevention, and treatment where indicated.

5.5-year-survival of CAD/CAM resin-based composite restorations in severe tooth wear patients.

OBJECTIVES: Aim of this prospective study was to assess full mouth rehabilitation of severe tooth wear patients using minimally invasive CAD/CAM resin-based composite (RBC) restorations and direct veneers by evaluating restoration survival up to 5.5-years. METHODS: Twenty-two patients with generalized severe tooth wear with functional and/or esthetic problems were included. Following minimally invasive preparation, CAD/CAM RBC restorations (LAVA Ultimate,3M) were adhesively luted, direct RBC veneers (Filtek Supreme XTE, 3M) were applied in the aesthetic region. Patients were recalled after 1m,1y,3y,5y and seen in between recalls by their general dentists or at the clinical study center if complaints occurred. Failures were categorized as F1 (severe deficiencies requiring replacement/extraction), F2 (localized deficiencies requiring re-cementation/repair) and F3 (small chippings requiring refurbishment/monitoring). Survival of indirect restorations was evaluated using lifetables and Kaplan-Meier-graphs, distinguishing between failure categories and tooth type (front teeth=FT, premolars=PM, molars=M). F1 + F2 and F1 + F2 + F3 failures were analyzed using Cox regression on the variables tooth type/ location, age, gender and VDO increase (p < 0.05). RESULTS: 568 indirect restorations and 200 direct veneers in 21 patients evaluated for up to 5.5-years. For indirect restorations, 96 failures were recorded (F1:6;F2:41;F3:49) and annual failure rates were 0.29%(FT), 1.56%(PM), 2.93%(M) for F1 +F2 and 0.53%(FT), 2.42%(PM), 6.11%(M) for F1 + F2 + F3. Reasons for failure were chipping fracture (48), adhesive fracture (32), complete debonding (7), caries (4), endodontic treatment (1) and reasons unknown (documentation general dentists, 4). Molar tooth type had a statistically significantly increased probability of failure compared with front teeth and premolars for F1 + F2 + F3 (p < 0.006). Direct veneer restorations showed 18 failures (F1:2;F2:9;F3:7). SIGNIFICANCE: Minimally invasive CAD/CAM RBC restorations combined with direct RBC veneers showed an acceptable clinical mid-term survival for restorative rehabilitation of severely worn dentitions.

Chewing performance of patients with worn dentition before and after restorations: A scoping review.

BACKGROUND: Tooth wear is a multifactorial complex process related to the loss of dental tissue, due to chemical or mechanical processes, by abrasion, attrition, erosion. Restorative treatment represents an attempt to rebuild and recreate the lost structure. OBJECTIVE: This scoping review aims to investigate whether restorative treatment of worn dentition (either with direct or indirect adhesive composite adhesive procedures or with prosthetic techniques) can have an impact on the masticatory performance parameters. METHODS: A scoping review was conducted on multiple databases (Pubmed, Medline CENTRAL, ICTRP), following the PRISMA guidelines. Abstracts of research papers were screened for suitability, and full-text articles were obtained for those who satisfied the inclusion and exclusion criteria. RESULTS: Only one article meet the inclusion criteria of the review. Restorative treatment of worn dentition although have a positive impact on the self-report ability to chew, has no effect on the masticatory performance test. CONCLUSION: At the moment, not enough evidence to comment on the actual therapeutic role of restorative treatment on tooth wear is available. Clinicians, before taking any clinical decision, should carefully discuss with patients the needs and expectations of the treatment plan.

The longevity of tooth-coloUred materials used for restoration of tooth wear: an evidence-based approach.

Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.

Treatment planning for patients with tooth wear.

Providing restorative dental care for patients with tooth wear can, at times, seem complex and demanding. The key to this process lies in a systematic approach that breaks down the component parts. In this chapter, the importance of a comprehensive assessment at the outset will be highlighted. This should include identification of the patient's chief complaint, taking a thorough history, completing the clinical examination, undertaking any special tests and arriving at clinical diagnoses. Together, this information will influence the treatment planning process, identify appropriate treatment concepts and options available and the individual stages that may be involved. The process should be both holistic and thorough to enable the patient and clinician to build a clear pathway and vision. In parallel, and with patient input throughout, it is essential to manage patient expectations as best as possible whilst remaining pragmatic and honest about treatment outcomes, longevity of restorations and the risks of failure.

[Restorative treatment of generalized tooth wear]. / Restauratieve behandeling van gegeneraliseerde gebitsslijtage.

A 24-year-old patient with generalized tooth wear was referred to the Radboud Tooth Wear Project. The tooth wear had a chemical aetiology, caused by gastro-oesophageal reflux and resulting in functional problems of the masticatory system and a reduced quality of life. The treatment of the patient was minimally invasive, with directly applied composite restorations on all teeth, by means of which an increase of vertical dimension of occlusion was introduced. The restorative treatment was not preceded by testing of the new vertical dimension of occlusion. The patient was able to function well again after restorative treatment.

[Direct adhesive reconstructions for restoration of posterior teeth with erosive tooth wear]. / Direkte Restaurationstechnik im Seitenzahnbereich zur Versorgung von erosionsbedingtem Zahnhartsubstanzverlust.

The restorative treatment of dental hard tissue loss, e.g., due to erosion, and the rehabilitation of the original vertical bite dimension confronts the dentist with problems when implementing the therapy. Traditionally, this therapy is conducted with laboratory-fabricated workpieces made of ceramics which usually require a preparation of the remaining tooth substance and also causes high costs for the patient. Therefore, alternative methods should be considered. This article presents the use of direct adhesive composite restorations as a way of reconstructing a dentition severely altered by erosion. To reconstruct the occlusal surfaces, transfer splints are used that are made on the basis of individual wax-up models. The procedure described is a well-researched and proven method for restoring teeth with erosion-related loss of hard tooth substance. As with all new procedures, there will be a certain learning curve for the practical dentist after which high-quality restorations can be implemented with this technique.

Mandibular Distalisation for Tooth Wear in Patients Requiring Mandibular Protrusion for Sleep Apnoea.

BACKGROUND: Pathological tooth wear is an increasing concern and may require intervention and occlusal rehabilitation. Often the treatment includes distalisaton of the mandible to restore the dentition in centric relation. Obstructive sleep apnoea (OSA) is another condition treated my mandibular repositioning but in this case by an advancement appliance. The authors have a concern that there could be a group of patients with both conditions where distalisation for their tooth wear management would be contrary to their OSA treatment. This paper aims to look at this potential risk. METHODS: A literature search was carried out using the following keywords (OSA or sleep apnoea or apnea or snoring or AHI or Epworth score) and for tooth surface loss (TSL or distalisation or centric relation or tooth wear or full mouth rehabilitation). RESULTS: No studies were identified which considered the effect of mandibular distalisation on OSA. CONCLUSION: There is a theoretical risk that dental treatment involving distalisation may adversely affect patients at risk of OSA or worsening their condition due to the modification of airway patency. Further study is recommended.

Clinical factors to consider in definitive treatment planning for patients with tooth wear.

Diagnosis, disease control and prevention are the precursors to successful definitive restorative treatment of pathological tooth wear. This case series illustrates how proposed key clinical features can influence treatment complexity and provide the clinician with a logical sequence of treatment options for definitive management of tooth wear.

Occlusal records in the production of mounted study casts for tooth wear planning and management.

This article forms part of a series looking at management of patients with tooth wear. Articulated study casts can be essential in assisting the clinician to plan and communicate proposed treatment to the dental technician and patient. Their production is often seen as straightforward, but a lack of attention to detail can quickly lead to articulated casts that do not replicate the patient clinical presentation. This in turn will lead to inaccurate planning and potentially a suboptimal treatment outcome. This article discusses a collection of the clinical records needed to produce accurate articulated study casts, which can be utilised for tooth wear planning. It also aims to present the evidence base for the recommendations outlined.

Indications for the use of direct composite restorations in the management of tooth wear.

The increasing prevalence of tooth surface loss has been widely reported. Patients present with varying degrees of tooth wear and consideration is given to whether a prevention and monitoring approach, or a treatment and restoration approach, is appropriate. A missed diagnosis or excessively prolonged monitoring risks progression to the detriment of a successful outcome, with the potential compromise on the quality and quantity of tooth structure available for predictable adhesive dentistry. Direct composite resin (DCR) restorations can be considered as a viable treatment option for all extents of tooth wear, including cases that have progressed to a severe degree. This paper aims to review the indications for DCR restorations in the management of tooth wear, using clinical cases to demonstrate their effectiveness.