Bioinspired Sulfobetaine Borneol Fluorinated Amphiphilic Polymers for Marine Antifouling and Fouling Release Applications.

The development of nontoxic antifouling coatings in static marine environments is urgent. Herein, the successful synthesis of sulfobetaine borneol fluorinated polymers (PEASBF) by a free radical polymerization method is reported. The PEASBF coatings exhibit outstanding antifouling activity, which effectively resists the adhesion of Bovine serum albumin (FITC-BSA adhesion rate: 0.5%), Pseudomonas sp. (Biofilm: 1.3 absorbance) and Navicula sp. (Diatom attachment rate: 33%). More importantly, the PEASBF coatings display outstanding fouling release properties, achieving a release rate of 98% for Navicula sp., and the absorbance of the Pseudomonas sp. biofilm is only 0.2 under 10 Pa shear stress. XPS and MD studies showed that the fluorinated/isobornyl groups induce more sulfobetaine groups to migrate toward polymer surfaces for intensify antifouling. Additionally, the chiral stereochemical structure of borneol enhances antifouling and fouling release ability of amphiphilic polymers. Therefore, the PEASBF has the potential for static marine antifouling applications.

Insight into the efficiency of microalgae' lipidic extracts as photosensitizers for Antimicrobial Photodynamic Therapy against Staphylococcus aureus.

Antibacterial resistance causes around 1.27 million deaths annually around the globe and has been recognized as a top 3 priority health threat. Antimicrobial photodynamic therapy (aPDT) is considered a promising alternative to conventional antibiotic treatments. Algal lipid extracts have shown antibacterial effects when used as photosensitizers (PSs) in aPDT. In this work we assessed the photodynamic efficiency of lipidic extracts of microalgae belonging to different phyla (Bacillariophyta, Chlorophyta, Cyanobacteria, Haptophyta, Ochrophyta and Rhodophyta). All the extracts (at 1 mg mL-1) demonstrated a reduction of Staphylococcus aureus >3 log10 (CFU mL-1), exhibiting bactericidal activity. Bacillariophyta and Haptophyta extracts were the top-performing phyla against S. aureus, achieving a reduction >6 log10 (CFU mL-1) with light doses of 60 J cm-2 (Bacillariophyta) and 90 J cm-2 (Haptophyta). The photodynamic properties of the Bacillariophyta Phaeodactylum tricornutum and the Haptophyta Tisochrysis lutea, the best effective microalgae lipid extracts, were also assessed at lower concentrations (75 µg mL-1, 7.5 µg mL-1, and 3.75 µg mL-1), reaching, in general, inactivation rates higher than those obtained with the widely used PSs, such as Methylene Blue and Chlorine e6, at lower concentration and light dose. The presence of chlorophyll c, which can absorb a greater amount of energy than chlorophylls a and b; rich content of polyunsaturated fatty acids (PUFAs) and fucoxanthin, which can also produce ROS, e.g. singlet oxygen (1O2), when photo-energized; a lack of photoprotective carotenoids such as ß-carotene, and low content of tocopherol, were associated with the algal extracts with higher antimicrobial activity against S. aureus. The bactericidal activity exhibited by the extracts seems to result from the photooxidation of microalgae PUFAs by the 1O2 and/or other ROS produced by irradiated chlorophylls/carotenoids, which eventually led to bacterial lipid peroxidation and cell death, but further studies are needed to confirm this hypothesis. These results revealed the potential of an unexplored source of natural photosensitizers (microalgae lipid extracts) that can be used as PSs in aPDT as an alternative to conventional antibiotic treatments, and even to conventional PSs, to combat antibacterial resistance.

Effects of Different pH Levels on the Structural and Functional Properties of Proteins of Phaeodactylum tricornutum.

Phaeodactylum tricornutum is identified by its capacity for rapid growth, reproduction, and in vitro cultivation, as well as the presence of a range of high-value active compounds, including proteins, with potential food applications. The objective of this study was to investigate the effects of pH shift treatments (pH of 3, 5, 7, 9, and 11) on the structural and functional properties of the Phaeodactylum tricornutum protein (PTP). The molecular weight of the PTP was predominantly distributed within the following ranges: below 5 kDa, 5-100 kDa, and above 100 kDa. Compared to the acidic environment, the PTP demonstrated higher solubility and greater free sulfhydryl group content in the alkaline environment. Additionally, PTP had a smaller particle size and higher thermal stability in alkaline environments. The PTP exhibited superior foaming ability (135%), emulsification activity index (3.72 m2/g), and emulsion stability index (137.71 min) in alkaline environments. The results of this investigation provide a foundation for the future development and application of the PTP in the food industry.

Total Synthesis of a Peptide Diatom Sex Pheromone Bearing a Sulfated Aspartic Acid.

The peptide sex-inducing pheromone SIP+ (1) bearing an unusual sulfated aspartic acid residue induces sexual reproduction in diatom populations. Herein, we report the first total synthesis of SIP+ using both a sulfated building block approach and a solid-phase peptide synthesis (SPPS)-compatible late-stage sulfation strategy to assemble the natural product. The modular approaches provide concise routes to useful quantities of the natural product for future structure activity relationship studies examining the role of SIP+ in diatom biology.

Molecular events accompanying aggregation-induced energy quenching in fucoxanthin-chlorophyll proteins.

In high light, the antenna system in oxygenic photosynthetic organisms switches to a photoprotective mode, dissipating excess energy in a process called non-photochemical quenching (NPQ). Diatoms exhibit very efficient NPQ, accompanied by a xanthophyll cycle in which diadinoxanthin is de-epoxidized into diatoxanthin. Diatoms accumulate pigments from this cycle in high light, and exhibit faster and more pronounced NPQ. The mechanisms underlying NPQ in diatoms remain unclear, but it can be mimicked by aggregation of their isolated light-harvesting complexes, FCP (fucoxanthin chlorophyll-a/c protein). We assess this model system by resonance Raman measurements of two peripheral FCPs, trimeric FCPa and nonameric FCPb, isolated from high- and low-light-adapted cells (LL,HL). Quenching is associated with a reorganisation of these proteins, affecting the conformation of their bound carotenoids, and in a manner which is highly dependent on the protein considered. FCPa from LL diatoms exhibits significant changes in diadinoxanthin structure, together with a smaller conformational change of at least one fucoxanthin. For these LL-FCPa, quenching is associated with consecutive events, displaying distinct spectral signatures, and its amplitude correlates with the planarity of the diadinoxanthin structure. HL-FCPa aggregation is associated with a change in planarity of a 515-nm-absorbing fucoxanthin, and, to a lesser extent, of diadinoxanthin. Finally, in FCPb, a blue-absorbing fucoxanthin is primarily affected. FCPs thus possess a plastic structure, undergoing several conformational changes upon aggregation, dependent upon their precise composition and structure. NPQ in diatoms may therefore arise from a combination of structural changes, dependent on the environment the cells are adapted to.

Automated Synthesis of Algal Fucoidan Oligosaccharides.

Fucoidan, a sulfated polysaccharide found in algae, plays a central role in marine carbon sequestration and exhibits a wide array of bioactivities. However, the molecular diversity and structural complexity of fucoidan hinder precise structure-function studies. To address this, we present an automated method for generating well-defined linear and branched α-fucan oligosaccharides. Our syntheses include oligosaccharides with up to 20 cis-glycosidic linkages, diverse branching patterns, and 11 sulfate monoesters. In this study, we demonstrate the utility of these oligosaccharides by (i) characterizing two endo-acting fucoidan glycoside hydrolases (GH107), (ii) utilizing them as standards for NMR studies to confirm suggested structures of algal fucoidans, and (iii) developing a fucoidan microarray. This microarray enabled the screening of the molecular specificity of four monoclonal antibodies (mAb) targeting fucoidan. It was found that mAb BAM4 has cross-reactivity to ß-glucans, while mAb BAM2 has reactivity to fucoidans with 4-O-sulfate esters. Knowledge of the mAb BAM2 epitope specificity provided evidence that a globally abundant marine diatom, Thalassiosira weissflogii, synthesizes a fucoidan with structural homology to those found in brown algae. Automated glycan assembly provides access to fucoidan oligosaccharides. These oligosaccharides provide the basis for molecular level investigations into fucoidan's roles in medicine and carbon sequestration.

The secondary structure of diatom silaffin peptide R5 determined by two-dimensional infrared spectroscopy.

Diatoms, unicellular marine organisms, harness short peptide repeats of the protein silaffin to transform silicic acid into biosilica nanoparticles. This process has been a white whale for material scientists due to its potential in biomimetic applications, ranging from medical to microelectronic fields. Replicating diatom biosilicification will depend on a thorough understanding of the silaffin peptide structure during the reaction, yet existing models in the literature offer conflicting views on peptide folding during silicification. In our study, we employed two-dimensional infrared spectroscopy (2DIR) within the amide I region to determine the secondary structure of the silaffin repeat unit 5 (R5), both pre- and post-interaction with silica. The 2DIR experiments are complemented by molecular dynamics (MD) simulations of pure R5 reacting with silicate. Subsequently, theoretical 2DIR spectra calculated from these MD trajectories allowed us to compare calculated spectra with experimental data, and to determine the diverse structural poses of R5. Our findings indicate that unbound R5 predominantly forms ß-strand structures alongside various atypical secondary structures. Post-silicification, there's a noticeable shift: a decrease in ß-strands coupled with an increase in turn-type and bend-type configurations. We theorize that this structural transformation stems from silicate embedding within R5's hydrogen-bond network, prompting the peptide backbone to contract and adapt around the biosilica precursors.

Structural characterization of the extracellular stalk material of the diatom Didymosphenia geminata.

The study represents new bioanalytical characterization of mainly organic components of the poorly investigated extracellular polymeric substances (EPS) of the enigmatic diatom Didymosphenia geminata, an invasive, worldwide expanding species endangering diverse ecosystems. This microalga attaches its siliceous cells to rocky substrates using fibrous stalks, which are made of an EPS-based matrix stabilized by crystalline calcite. The EPS were analyzed using selected methods, including microscopic, spectroscopic, and spectrometric techniques. We identified diverse types of biomolecules. The presence of lipids, condensed aromatics, and heteroaromatic compounds in the EPS has been confirmed using high-resolution mass spectrometry (HR-MS). Additionally, both sulfur-containing functionalities and carboxylic acids were determined too using infrared (IR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. For the first time, lignin compounds have been detected as one of the components of the EPS of the D. geminata diatom, using HR-MS and fluorescence microscopy (FM) in combination with specific staining techniques. By increasing the understanding of the chemistry and structural features of the stalks, we aim to develop potential applications and methods for removing these stalks from affected regions in the future, or, alternatively, to use them as a large-scale source of sustainable biocomposite material.

An Atomistic View on the Mechanism of Diatom Peptide-Guided Biomimetic Silica Formation.

Deciphering nature's remarkable way of encoding functions in its biominerals holds the potential to enable the rational development of nature-inspired materials with tailored properties. However, the complex processes that convert solution-state precursors into solid biomaterials remain largely unknown. In this study, an unconventional approach is presented to characterize these precursors for the diatom-derived peptides R5 and synthetic Silaffin-1A1 (synSil-1A1). These molecules can form defined supramolecular assemblies in solution, which act as templates for solid silica structures. Using a tailored structural biology toolbox, the structure-function relationships of these self-assemblies are unveiled. NMR-derived constraints are employed to enable a recently developed fractal-cluster formalism and then reveal the architecture of the peptide assemblies in atomistic detail. Finally, by monitoring the self-assembly activities during silica formation at simultaneous high temporal and residue resolution using real-time spectroscopy, the mechanism is elucidated underlying template-driven silica formation. Thus, it is demonstrated how to exercise morphology control over bioinorganic solids by manipulating the template architectures. It is found that the morphology of the templates is translated into the shape of bioinorganic particles via a mechanism that includes silica nucleation on the solution-state complexes' surfaces followed by complete surface coating and particle precipitation.

Elucidating supercritical fluid extraction of fucoxanthin from algae to enable the integrated biorefinery.

The emerging nutraceutical, fucoxanthin, shows promise as a high-value product to enable the integrated biorefinery. Fucoxanthin can be extracted from algae through supercritical fluid extraction (SFE), but literature does not agree on optimal extraction conditions. Here, a statistical analysis of literature identifies supercritical carbon dioxide (scCO2) density, ethanol cosolvent amount, and polarity as significant predictors of fucoxanthin yield. Novel SFE experiments are then performed using a fucoxanthin standard, describing its fundamental solubility. These experiments establish solvent system polarity as the key knob to tune fucoxanthin recovery from 0% to 100% and give specific operating conditions for targeted fucoxanthin extraction.Further experiments compare extractions on fucoxanthin standard with extractions from Phaeodactylum tricornutum microalgae to elucidate the effect of the algae matrix. Results show selectivity of fucoxanthin over chlorophyll in scCO2 microalgae extractions that was not seen in extractions with ethanol, indicating a benefit of scCO2 to design selective extraction schemes.

Ultrafast Energy Transfer in a Diatom Photosystem II Supercomplex.

The light-harvesting complexes (LHCs) of diatoms, specifically fucoxanthin-Chl a/c binding proteins (FCPs), exhibit structural and functional diversity, as highlighted by recent structural studies of photosystem II-FCP (PSII-FCPII) supercomplexes from different diatom species. The excitation dynamics of PSII-FCPII supercomplexes isolated from the diatom Thalassiosira pseudonana was explored using time-resolved fluorescence spectroscopy and two-dimensional electronic spectroscopy at room temperature and 77 K. Energy transfer between FCPII and PSII occurred remarkably fast (<5 ps), emphasizing the efficiency of FCPII as a light-harvesting antenna. The presence of long-wavelength chlorophylls may further help concentrate excitations in the core complex and increase the efficiency of light harvesting. Structure-based calculations reveal remarkably strong excitonic couplings between chlorophylls in the FCP antenna and between FCP and the PSII core antenna that are the basis for the rapid energy transfer.

Lysis-Free Isolation and Direct Amplification of Pathogenic Bacterial DNA Using Diatom Frustules.

DNA has been implicated as an important biomarker for the diagnosis of bacterial infections. Herein, we developed a streamlined methodology that uses diatom frustules (DFs) to liberate and capture bacterial DNA and allows direct downstream amplification tests without any lysis, washing, or elution steps. Unlike most conventional DNA isolation methods that rely on cell lysis to release bacterial DNA, DFs can trigger the oxidative stress response of bacterial cells to promote bacterial membrane vesicle formation and DNA release by generating reactive oxygen species in aqueous solutions. Due to the hierarchical porous structure, DFs provided high DNA capture efficiency exceeding 80% over a wide range of DNA amounts from 10 pg to 10 ng, making only 10 µg DFs sufficient for each test. Since laborious liquid handling steps are not required, the entire DNA sample preparation process using DFs can be completed within 3 min. The diagnostic use of this DF-based methodology was illustrated, which showed that the DNA of the pathogenic bacteria in serum samples was isolated by DFs and directly detected using polymerase chain reaction (PCR) at concentrations as low as 102 CFU/mL, outperforming the most used approaches based on solid-phase DNA extraction. Furthermore, most of the bacterial cells were still alive after DNA isolation using DFs, providing the possibility of recycling samples for storage and further diagnosis. The proposed DF-based methodology is anticipated to simplify bacterial infection diagnosis and be broadly applied to various medical diagnoses and biological research.

Modification of Living Diatom, Thalassiosira weissflogii, with a Calcium Precursor through a Calcium Uptake Mechanism: A Next Generation Biomaterial for Advanced Delivery Systems.

The diatom's frustule, characterized by its rugged and porous exterior, exhibits a remarkable biomimetic morphology attributable to its highly ordered pores, extensive surface area, and unique architecture. Despite these advantages, the toxicity and nonbiodegradable nature of silica-based organisms pose a significant challenge when attempting to utilize these organisms as nanotopographically functionalized microparticles in the realm of biomedicine. In this study, we addressed this limitation by modulating the chemical composition of diatom microparticles by modulating the active silica metabolic uptake mechanism while maintaining their intricate three-dimensional architecture through calcium incorporation into living diatoms. Here, the diatom Thalassiosira weissflogii was chemically modified to replace its silica composition with a biodegradable calcium template, while simultaneously preserving the unique three-dimensional (3D) frustule structure with hierarchical patterns of pores and nanoscale architectural features, which was evident by the deposition of calcium as calcium carbonate. Calcium hydroxide is incorporated into the exoskeleton through the active mechanism of calcium uptake via a carbon-concentrating mechanism, without altering the microstructure. Our findings suggest that calcium-modified diatoms hold potential as a nature-inspired delivery system for immunotherapy through antibody-specific binding.

Widespread Production of Polyunsaturated Aldehydes by Benthic Diatoms of the North Pacific Ocean's Salish Sea.

Diatoms are key primary producers across marine, freshwater, and terrestrial ecosystems. They are responsible for photosynthesis and secondary production that, in part, support complex food webs. Diatoms can produce phytochemicals that have transtrophic ecological effects which increase their competitive fitness. Polyunsaturated aldehydes (PUAs) are one class of diatom-derived phytochemicals that are known to have allelopathic and anti-herbivory properties. The anti-herbivory capability of PUAs results from their negative effect on grazer fecundity. Since their discovery, research has focused on their production by pelagic marine diatoms, and their effects on copepod egg production, hatching success, and juvenile survival and development. Few investigations have explored PUA production by the prolific suite of benthic marine diatoms, despite their importance to coastal trophic systems. In this study, we tested eight species of benthic diatoms for the production of the bioactive PUAs 2,4-heptadienal, 2,4-octadienal, and 2,4-decadienal. Benthic diatom species were isolated from the Salish Sea, an inland sea within the North Pacific ecosystem. All species were found to be producers of at least two PUAs in detectable concentrations, with five species producing all three PUAs in quantifiable concentrations. Our results indicate that production of PUAs from Salish Sea benthic diatoms may be widespread, and thus these compounds may contribute to benthic coastal food web dynamics through heretofore unrecognized pathways. Future studies should expand the geographic scope of investigations into benthic diatom PUA production and explore the effects of benthic diatoms on benthic consumer fecundity.

A Pseudo-nitzschia metabarcoding approach with a calibrated ITS1 reference sequence database applied in the Taiwan Strait.

Pseudo-nitzschia is a cosmopolitan phytoplankton genus of which some species can form blooms and produce the neurotoxin domoic acid (DA). Identification of Pseudo-nitzschia is generally based on field material or strains followed by morphological and/or molecular characterization. However, this process is time-consuming and laborious, and can not obtain a relatively complete and reliable profile of the Pseudo-nitzschia community, because species with low abundance in the field or potentially unavailable for culturing may easily be overlooked. In the present study, specific ITS primer sets were designed and evaluated using in silico matching. The primer set ITS-84F/456R involving the complete ITS1 region was found optimal. Based on matching with a Pseudo-nitzschia ITS1 reference sequence database carefully-calibrated in this study, a metabarcoding approach using annotated amplicon sequence variants (ASV) was applied in the Taiwan Strait of the East China Sea during two cruises in the spring and summer of 2019. In total, 48 Pseudo-nitzschia species/phylotypes including 36 known and 12 novel were uncovered, and verified by haplotype networks, ITS2 secondary structure comparisons and divergence analyses. Correlation analyses revealed that temperature was a key factor affecting the seasonal variation of the Pseudo-nitzschia community. This study provides an overview of the Pseudo-nitzschia community in the Taiwan Strait, with new insights into the diversity. The developed metabarcoding approach may be used elsewhere as a standard reference for accurate annotation of Pseudo-nitzschia.

Lipidome Plasticity Enables Unusual Photosynthetic Flexibility in Arctic vs. Temperate Diatoms.

The diatom lipidome actively regulates photosynthesis and displays a high degree of plasticity in response to a light environment, either directly as structural modifications of thylakoid membranes and protein-pigment complexes, or indirectly via photoprotection mechanisms that dissipate excess light energy. This acclimation is crucial to maintaining primary production in marine systems, particularly in polar environments, due to the large temporal variations in both the intensity and wavelength distributions of downwelling solar irradiance. This study investigated the hypothesis that Arctic marine diatoms uniquely modify their lipidome, including their concentration and type of pigments, in response to wavelength-specific light quality in their environment. We postulate that Arctic-adapted diatoms can adapt to regulate their lipidome to maintain growth in response to the extreme variability in photosynthetically active radiation. This was tested by comparing the untargeted lipidomic profiles, pigmentation, specific growth rates and carbon assimilation of the Arctic diatom Porosira glacialis vs. the temperate species Coscinodiscus radiatus during exponential growth under red, blue and white light. Here, we found that the chromatic wavelength influenced lipidome remodeling and growth in each strain, with P. glacialis showing effective utilization of red light coupled with increased inclusion of primary light-harvesting pigments and polar lipid classes. These results indicate a unique photoadaptation strategy that enables Arctic diatoms like P. glacialis to capitalize on a wide chromatic growth range and demonstrates the importance of active lipid regulation in the Arctic light environment.

Mechanism of branching morphogenesis inspired by diatom silica formation.

The silica-based cell walls of diatoms are prime examples of genetically controlled, species-specific mineral architectures. The physical principles underlying morphogenesis of their hierarchically structured silica patterns are not understood, yet such insight could indicate novel routes toward synthesizing functional inorganic materials. Recent advances in imaging nascent diatom silica allow rationalizing possible mechanisms of their pattern formation. Here, we combine theory and experiments on the model diatom Thalassiosira pseudonana to put forward a minimal model of branched rib patterns-a fundamental feature of the silica cell wall. We quantitatively recapitulate the time course of rib pattern morphogenesis by accounting for silica biochemistry with autocatalytic formation of diffusible silica precursors followed by conversion into solid silica. We propose that silica deposition releases an inhibitor that slows down up-stream precursor conversion, thereby implementing a self-replicating reaction-diffusion system different from a classical Turing mechanism. The proposed mechanism highlights the role of geometrical cues for guided self-organization, rationalizing the instructive role for the single initial pattern seed known as the primary silicification site. The mechanism of branching morphogenesis that we characterize here is possibly generic and may apply also in other biological systems.

Biomimetic Diatom Biosilica and Its Potential for Biomedical Applications and Prospects: A Review.

Diatom biosilica is an important natural source of porous silica, with three-dimensional ordered and nanopatterned structures referred to as frustules. The unique features of diatom frustules, such as their high specific surface area, thermal stability, biocompatibility, and adaptable surface chemistry, render diatoms valuable materials for high value-added applications. These attributes make diatoms an exceptional cost-effective raw material for industrial use. The functionalization of diatom biosilica surface improves its biophysical properties and increases the potential applications. This review focuses on the potential uses of diatom biosilica including traditional approaches and recent progress in biomedical applications. Not only well-studied drug delivery systems but also promising uses on bone regeneration and wound healing are covered. Furthermore, considerable aspects and possible future directions for the use of diatom biosilica materials are proposed to develop biomedical applications and merit further exploration.

Spectral Tuning and Excitation-Energy Transfer by Unique Carotenoids in Diatom Light-Harvesting Antenna.

The light-harvesting antennae of diatoms and spinach are composed of similar chromophores; however, they exhibit different absorption wavelengths. Recent advances in cryoelectron microscopy have revealed that the diatom light-harvesting antenna fucoxanthin chlorophyll a/c-binding protein (FCPII) forms a tetramer and differs from the spinach antenna in terms of the number of protomers; however, the detailed molecular mechanism remains elusive. Herein, we report the physicochemical factors contributing to the characteristic light absorption of the diatom light-harvesting antenna based on spectral calculations using an exciton model. Spectral analysis reveals the significant contribution of unique fucoxanthin molecules (fucoxanthin-S) in FCPII to the diatom-specific spectrum, and further analysis determines their essential role in excitation-energy transfer to chlorophyll. It was revealed that the specificity of these fucoxanthin-S molecules is caused by the proximity between protomers associated with the tetramerization of FCPII. The findings of this study demonstrate that diatoms employ fucoxanthin-S to harvest energy under the ocean in the absence of long-wavelength sunlight and can provide significant information about the survival strategies of photosynthetic organisms to adjust to their living environment.

The Art of Exploring Diatom Biosilica Biomaterials: From Biofabrication Perspective.

Diatom is a common single-cell microalgae with large species and huge biomass. Diatom biosilica (DB), the shell of diatom, is a natural inorganic material with a micro-nanoporous structure. Its unique hierarchical porous structure gives it great application potential in drug delivery, hemostat materials, and biosensors, etc. However, the structural diversity of DB determines its different biological functions. Screening hundreds of thousands of diatom species for structural features of DB that meet application requirements is like looking for a needle in a seaway. And the chemical modification methods lack effective means to control the micro-nanoporous structure of DB. The formation of DB is a typical biomineralization process, and its structural characteristics are affected by external environmental conditions, genes, and other factors. This allows to manipulate the micro-nanostructure of DB through biological regulation method, thereby transforming the screening mode of the structure function of DB from a needle in a seaway to biofabrication mode. This review focuses on the formation, biological modification, functional activity of DB structure, and its application in biomaterials field, providing regulatory strategies and research idea of DB from the perspective of biofabrication. It will also maximize the possibility of using DB as biological materials.