Benzoic acid-modified monolithic column for separation of hydrophilic compounds by capillary electrochromatography with high content of water in mobile phase.

Hydrophilic column combined with mobile phase containing high content of water is a green method for the separation of polar compounds, but there are few related studies, and the separation efficiency and performance of existing columns still needs to be improved. In this work, a novel monolithic column for separation of hydrophilic compounds under both high water content and HILIC condition, was prepared by in-situ polymerization using 4-vinylbenzoic acid (VBA) and 1-(Acryloyloxy)-3-(methacryloyloxy)-2-propanol (AMAP) as functional monomers. The poly(VBA-co-AMAP) monolithic column showed good separation performance towards various polar compounds under different chromatographic conditions based on the π-interaction, hydrophobic and hydrogen bonding interactions provided by 4-vinylbenzoic acid functional monomer. The highest column efficiency for adenine was over 2.15 × 105 plates m-1 (theoretical plate, N). In addition, the monolith showed good stability and reproducibility, the relative standard deviations (RSDs) of retention times within days (n = 5), between days (n = 5), between columns (n = 3) and between batches (n = 3) were 0.47-1.13%, 1.20-2.68%, 0.59-1.78% and 1.54-3.60%, respectively. This novel type of monolith has great application potential in the separation of hydrophilic compounds.

In situ room-temperature preparation of a covalent organic framework as stationary phase for high-efficiency capillary electrochromatographic separation.

Covalent organic frameworks (COFs), considered as a series of newly emerging porous organic materials, have been widely utilized in separation fields. Herein, a novel COF (TFPB-BD) was first employed as stationary phase for high-efficiency capillary electrochromatographic separation. Benzidine (BD) and 1,3,5-Tris-(4-formylphenyl)benzene (TFPB) were selected as organic linkers and then introduced into the aldehyde group modified capillary for the in situ growth of TFPB-BD onto the capillary inner wall at room temperature. The morphology and formation of TFPB coated capillary column were confirmed by a variety of tools including Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). It's interesting that the TFPB globular crystals with nanoscale were uniformly and densely modified on the capillary inner surface. Hence, the prepared column exhibited prominent separation performance for the test analytes including alkylbenzenes, chlorobenzenes and phenolic compounds with high efficiency and high resolution. The maximum column efficiency can reach about 1.8 × 105 plates•m-1. Additionally, the high resolutions of anilines, amino acids and parabens were also achieved on the TFPB modified capillary. The precisions (RSDs) of the retention times of alkylbenzenes of intra-day runs (n = 3), inter-day runs (n = 3) and parallel columns (n = 3) were all less than 2.83%. This innovative COF-based stationary phase gives great promise for the chromatographic separation field.

A comparison of 2 micron inner diameter open tubular column liquid chromatography with pressure-driven isocratic, slip-flow, and electrochromatographic modes of operation: a theoretical study.

Modifications to the flow profile used in open tube capillary liquid chromatography (OT-CLC) include using slip-flow walls and using electroosmosis as a fluid pump as practiced in electrochromatography. These modifications are implemented experimentally by changing the capillary surface and solvent conditions which results in the change of boundary conditions at the capillary wall. In this paper we employ a theory-based study and compare the zone broadening of simple solutes using parabolic flow from a liquid pump, slip-flow from a highly hydrophobic inner surface with water eluent, and electroosmosis for the conditions of pure water and dilute salt utilizing 2 µm inner diameter OT capillaries. In general, the two types of flow other than parabolic exhibit thin zones in the early part of the chromatogram, consistent with previous studies of slip-flow and electroosmotic flow used in electrochromatography. Electrochromatography is shown to yield higher efficiency and less zone broadening than parabolic and slip-flow conditions used in this study. Nonetheless, it is found that the zone standard deviations are shown to be similar for these flow profiles as is the number of plates for these different flow profiles under the conditions utilized here. It is revealed that these modifications do not warrant the effort to maintain the special solvent conditions when compared to gradient elution OT-CLC, which gives a nearly constant peak width throughout the chromatogram, is easiest to implement, and is the method of choice for complex analysis.

Recent Advances in Capillary Electrochromatography of Proteins and Carbohydrates in the Biopharmaceutical and Biomedical Field.

Capillary electrochromatography (CEC) is a powerful hybrid separation technique that combines capillary electrophoresis and capillary chromatography, capable to address the analytical challenges of proteomics and glycomics. The focus of this paper is to review the recent developments in capillary electrochromatography of proteins and carbohydrates. The different column types applied in capillary electrochromatography such as packed bed, open tubular and monoliths are conferred in detail with respective separation examples. A comprehensive comparison is also given listing the mostly utilized coating methods, stationary phase materials and column preparation methods. The choice of porogenic solvent combinations for monolithic column fabrication is thoroughly discussed, paying close attention to the fine tuning options for the separation driving electroosmotic flow. Application examples of CEC in process analytical technology for the biopharmaceutical and biomarker discovery in the biomedical fields are also given.

Metal organic framework ZIF-90 modified with lactobionic acid for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs.

An in situ zeolite imidazole metal organic framework-90 (ZIF-90) modified capillary was prepared via the method of solvothermal synthesis. The coating of ZIF-90 was characterized by scanning electron microscopy, energy-dispersive X-ray spectrometry, and EOF. Capillary electrochromatography-based enantioseparation of the basic drugs propranolol (PRO), metoprolol (MET), atenolol (ATE), bisoprolol (BIS), and sotalol (SOT) was performed using lactobionic acid (LA) as the chiral selector. Compared with an uncoated silica capillary, the resolutions are greatly improved (PRO 1.40 → 3.23; MET 1.07 → 3.19; ATE 1.07 → 3.15; BIS 1.16 → 3.41; SOT 1.00 → 2.79). Effects of buffer pH values, proportion of organic additives, concentration of lactobionic acid, and applied voltage were investigated. Graphical abstract Schematic presentation of the preparation of zeolitic imidazolate framework-90 (ZIF-90) modified capillary (ZIF-90@capillary) for enantioseparation of drug enantiomers. The capillary was applied to construct capillary electrochromatography system with lactobionic acid for enantioseparation of basic chiral drugs.

Performance of laterally elongated pillar array columns in capillary electrochromatography mode.

In the present study, cylindrical and laterally elongated pillar array columns were investigated for use in capillary electrochromatography. Minimal theoretical plate heights of H = 1.90 and 1.46 µm (in absence of sidewall effect) were obtained for coumarin C440 under unretained conditions for cylindrical and rectangular (laterally elongated, aspect ratio 4) pillar array columns, respectively. By comparing dispersion at the entire channel width to that at the central zone only, it appears that sidewall related dispersion significantly contributes to overall dispersion. A 40% reduction of the plate height was observed by taking into account only the central channel zone. A kinetic plot analysis was performed to evaluate the potential of the studied geometries by considering a maximum operating voltage of 20 kV as limiting parameter. It was demonstrated that rectangular radially elongated pillars produce a higher efficiency than cylindrical pillars and other microfabricated column structures for microchip capillary electrochromatography previously studied.

Evaluation of chiral separation based on bovine serum albumin-conjugated carbon nanotubes as stationary phase in capillary electrochromatography.

In this work, we utilized adsorbed BSA and multiwalled carbon nanoparticles (BSA/MWCNTs) as a stationary phase in open tubular (OT) capillary for separation of chiral drugs. (3-Aminopropyl)triethoxysilane was used to assist fabrication of BSA/MWCNTs-coated OT column by covalent bonding. Incorporation of MWCNTs nanomaterials into a polymer matrix could increase the phase ratio and take advantage of the easy preparation of an open tubular CEC column. SEM was carried out to characterize the BSA/MWCNTs OT columns. The electrochromatographic performance of the OT columns was evaluated by separation of ketoprofen, ibuprofen, uniconazole, and hesperidin. The effects of MWCNTs concentration, background solution pH and concentration, and applied voltage on separation were investigated. Chiral separations of ketoprofen, ibuprofen, uniconazole, and hesperidin were achieved using the BSA/MWCNTs-coated OT column with resolutions of 24.20, 12.81, 1.50, and 1.85, respectively. Their optimas were found in the 30 mM phosphate buffers at pH 5.0, 6.5, 7.0, and 6.5, respectively. In addition, the columns demonstrated good repeatability and stability with the run-to-run, day-to-day, and batch-to-batch RSDs of migration times less than 3.5%.

Open-tubular nanoelectrochromatography (OT-NEC): gel-free separation of single stranded DNAs (ssDNAs) in thermoplastic nanochannels.

Electrophoresis or electrochromatography carried out in nanometer columns (width and depth) offers some attractive benefits compared to microscale columns. These advantages include unique separation mechanisms that are scale dependent, fast separation times, and simpler workflow due to the lack of a need for column packing and/or wall coatings to create a stationary phase. We report the use of thermoplastics, in this case PMMA, as the substrate for separating single-stranded DNAs (ssDNAs). Electrophoresis nanochannels were created in PMMA using nanoimprint lithography (NIL), which can produce devices at lower cost and in a higher production mode compared to the fabrication techniques required for glass devices. The nanochannel column in PMMA was successful in separating ssDNAs in free solution that was not possible using microchip electrophoresis in PMMA. The separation could be performed in <1 s with resolution >1.5 when carried out using at an electric field strength of 280 V/cm and an effective column length of 60 µm (100 nm × 100 nm, depth and width). The ssDNAs transport through the PMMA column was driven electrokinetically under the influence of an EOF. The results indicated that the separation was dominated by chromatographic effects using an open tubular nano-electrochromatography (OT-NEC) mode of separation. Interesting to these separations was that no column packing was required nor a wall coating to create the stationary phase; the separation was affected using the native polymer that was UV/O3 activated and an aqueous buffer mobile phase.

Chiral metal-organic cages used as stationary phase for enantioseparations in capillary electrochromatography.

Since some metal-organic cages (MOCs) have been synthesized in past several years, the applications of MOCs such as drug delivery, molecular recognition, separation, catalysis, and gas storage, etc. have been witnessed with a significant increase. However, to the best of our knowledge, so far no one has used MOCs as chiral stationary phase to separate chiral compounds in CEC. In this study, three MOCs were developed as the stationary phase for CEC separation of enantiomers. The MOCs coated capillary column showed good chiral recognition ability for some chiral compounds, including amine, alcohols, ketone, etc. The influence of buffer concentration, applied voltage, pH of buffer solution on the chiral separations was also investigated. The RSDs of run-to-run, day-to-day, and column-to-column for retention time were 2.1-4.67%, 1.2-4.36%, and 3.62-6.43%, respectively. This work reveals that the chiral MOCs material is feasible for the enantioseparation in CEC.

Polymethacryloyl-L-Phenylalanine [PMAPA]-Based Monolithic Column for Capillary Electrochromatography.

The ability to detect catecholamines (CAs) and their metabolites is vital to understand the mechanism behind the neuronal diseases. Neurochemistry aims to provide an improved pharmacological, molecular and physiological understanding of complex brain chemistries by analytical techniques. Capillary electrophoresis (CE) is one such analytical technique that enables the study of various chemical species ranging from amino acids and peptides to natural products and drugs. CE can easily adapt the changes in research focus and in recent years remains an applicable technique for investigating neuroscience and single cell neurobiology. The prepared phenylalanine-based hydrophobic monolithic column, Polymethacryloyl-L-phenylalanine [PMAPA], was used as a stationary phase in capillary electrochromatography to separate CAs that are similar in size and shape to each other including dopamine (DA) and norepinephrine (NE) via hydrophobic interactions. Separation carried out in a short period of 17 min was performed with the electrophoretic mobility of 5.54 × 10-6 m2 V-1 s-1 and 7.60 × 10-6 m2 V-1 s-1 for DA and NE, respectively, at pH 7.0, 65% acetonitrile ratio with 100 mbar applied pressure by the developed hydrophobic monolithic column without needing any extra process such as imprinting or spacer arms to immobilize ligands used in separation.

Metal organic framework HKUST-1 modified with carboxymethyl-ß-cyclodextrin for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs.

This work shows that the metal organic framework (MOF) HKUST-1 of type Cu3(BTC)2 (also referred to as MOF-199; a face-centered-cubic MOF containing nanochannels) is a most viable coating for use in enantioseparation in capillary electrochromatography (CEC). A HKUST-1 modified capillary was prepared and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, elemental analysis and thermogravimetric analysis. CEC-based enantioseparation of the basic drugs propranolol (PRO), esmolol (ESM), metoprolol (MET), amlodipine (AML) and sotalol (SOT) was performed by using carboxymethyl-ß-cyclodextrin as the chiral selector. Compared with a fused-silica capillary, the resolutions are improved (ESM: 1.79; MET: 1.80; PRO: 4.35; SOT: 1.91; AML: 2.65). The concentration of chiral selector, buffer pH value, applied voltage and buffer concentration were optimized, and the reproducibilities of the migration times and Rs values were evaluated. Graphical abstract Schematic presentation of the preparation of a HKUST-1@capillary for enantioseparation of racemic drugs. Cu(NO3)2 and 1,3,5-benzenetricarboxylic acid (BTC) were utilized to prepare the HKUST-1@capillary. Then the capillary was applied to construct capillary electrochromatography system with carboxymethyl-ß-cyclodextrin (CM-ß-CD) for separation of basic racemic drugs.

Modulation of electroosmotic flow in capillary electrophoresis by plant polyphenol-inspired gallic acid/polyethyleneimine coatings: Analysis of small molecules.

Plant polyphenols can form functional coatings on various materials through self-polymerization. In this paper, a series of modified capillary columns, which possess diversity of charge characteristics for modulating electroosmotic flow (EOF), were prepared by one-step co-deposition of gallic acid (GA), a plant-derived polyphenol monomer, and branched polyethyleneimine (PEI). The physicochemical properties of the prepared columns were characterized by Fourier transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy and scanning electron microscopy (SEM). The magnitude and direction of EOF of GA/PEI co-deposited columns were modulated by changing a series of coating parameters, such as post-incubation of FeCl3, co-deposition time, and deposited amounts of GA and PEI with different relative molecular mass (PEI-600, PEI-1800, PEI-10000, and PEI-70000). Furthermore, the separation efficiencies of the prepared GA/PEI co-deposited columns were evaluated by separations of small molecules, including organic acids, polar nucleotides, phenols, nucleic acid bases and nucleosides. Results indicated that modulating of EOF plays an important role in enhancing the separation performance and reversing the elution order of the analytes. Finally, the developed method was successfully applied to quantitative analysis of acidic compounds in four real samples. The recoveries were in the range of 73.5%-85.8% for citric acid, benzoic acid, sorbic acid, salicylic acid and ascorbic acid in beverage and fruit samples, 101.6%-104.9% for cinnamic acid, vanillic acid, and ferulic acid in Angelica sinensis sample, while 84.6%-97.8% for guanosine-5'-monophosphate, uridine-5'-monophosphate, cytosine-5'- monophosphate and adenosine-5'-monophosphate in Cordyceps samples. These results indicated that the co-deposition of plant polyphenol-inspired GA/PEI coatings can provide new opportunities for EOF modulation of capillary electrophoresis.

Admicelles in open-tube capillaries for chromatography and electrochromatography.

Surfactant bilayers or admicelles at the solid surface-liquid interface inside 50-200 µm inner diameter (i.d.) open-tube fused-silica capillaries were developed as 'soft' stationary pseudophases for the liquid chromatographic (LC) separations of neutral and charged analytes. Admicelles were formed in-situ from buffered aqueous mobile phases with cetytrimethylammonium bromide at concentrations between the critical surface aggregation concentration and critical micelle concentration, which were determined by electroosmotic flow measurements using capillary electrophoresis. There were no micelles in the mobile phase solution. Also, there was no solid phase that is classically required in LC. Pressure and voltage driven modes or open-tubular admicellar liquid chromatography (OT-AMLC) and electrochromatography, respectively were proposed based on the separation of neutral analytes. The parameters (i.e., pH, concentration of surfactant, salt, and methanol in the mobile phase and capillary i.d.) that affected the surprising chromatographic effect of admicelles at the interface were investigated. The analytical performance of OT-AMLC for small molecules were found acceptable. Applications to environmental water and biological (HepG cell line metabolism media) samples analysis with appropriate sample preparation procedures were also conducted. The use of pseudophases at the solid surface-liquid interface could be a viable solution to problems associated with the use of solid stationary or support materials in nano- and micro-liquid chromatography and electrochromatography.

Ternary thiol-ene photopolymerization for facile preparation of ionic liquid-functionalized hybrid monolithic columns based on polyhedral oligomeric silsesquioxanes.

A simple thiol-ene photopolymerization approach was developed for the rapid preparation of ionic liquid-functionalized hybrid monolithic column based on polyhedral oligomeric silsesquioxane (POSS). "One-pot" polymerization was realized in the UV-transparent fused-silica capillary by using octanethiol, 1-allyl-3-methylimidazolium hexafluorophosphate as functional monomers and methacryl-substituted POSS as a crosslinker. The thiol-vinyl-methacrylate ternary system uniquely exhibits a mixed step-chain growth polymerization regime that combining the thiol-ene reaction and free-radical reaction mechanisms, which provides a simple route to prepare novel POSS-based functionalized hybrid monoliths. The pore property, permeability, and electroosmotic flow (EOF) of the hybrid monoliths can be tailored by proper adjustment of the feeding composition and initiation condition. Morphologic and spectroscopic characterizations of monolithic columns clearly indicate that utilization of the photo-initiated approach in thiol-vinyl polymerization can generate a more homogeneous porous structure, smaller domain size and higher column efficiency (53,800-60,300 plates/m for alkylbenzenes) than the thermally-initiated one (32,800-49,300 plates/m). Significant improvements in mechanical stability, anti-swelling property and tailorability of hybrid polymer were achieved in a simple manner, owing to the photopolymerization of rigid nanoscale POSS units and imidazolium-based ionic liquids in ternary thiol-vinyl system for the first time. The resulting hybrid monolith possessed controllable EOFs at pH values from 2 to 10, and showed a multimode separation mechanism in capillary electrochromatography, including π-π interaction, ion exchange, electrophoretic migration, electrostatic and hydrophobic interaction. Satisfactory separation ability was achieved for the analysis of different types of small molecules.

Open-tubular capillary electrochromatography with ß-cyclodextrin-functionalized magnetic nanoparticles as stationary phase for enantioseparation of dansylated amino acids.

Magnetic nanoparticles (MNPs) modified with ß-cyclodextrin and mono-6-deoxy-6-(1-methylimidazolium)-ß-cyclodextrin tosylate (an ionic liquid), which called MNP-ß-CD and MNP-ß-CD-IL, were coated into the capillary inner wall. Compared to an uncoated capillary, the new systems show good reproducibility and durability. The systems based on the use of MNP-ß-CD or MNP-ß-CD-IL as stationary phases were established for enantioseparation of Dns-modified amino acids. Improved resolutions were obtained for both CEC systems. Primary parameters such as running buffer pH value and applied voltage were systematically optimized in order to obtain optimal enantioseparations. Under the optimized conditions, the capillaries exhibited excellent chiral recognition ability for six Dns-amino acids (the DL-forms of alanine, leucine, lsoleucine, valine, methionine, glutamic acid) and provided a promising way for the preparation of chiral column. Graphical Abstract Schematic presentation of the open-tubular capillary electrochromatography systems with MNP-ß-CD and MNP-ß-CD-IL as stationary phases for enantioseparation of dansylated amino acids.

Multi-particle frits for packed capillary columns in electrochromatographic use.

Further development of capillary electrochromatography (CEC) is to some extent restricted by column technology. Packed capillary columns are most commonly used in CEC because of higher sample capacity and higher sensitivity than open tubular columns, and better reproducibility and uniformity than monolithic columns. Fritting is the core component for the fabrication of packed capillary columns. Therefore various fritting technologies attract continuous attention from analytical community. A convenient fritting method was developed in this study. In contrast to the reported single-particle fritting, this method applies a multi-particle fritting technology to hold stationary phase in capillary columns. Several large porous particles smaller than the column internal diameter were tapped in and immobilized in inlet and outlet of the packing material bed due to direct and indirect keystone effect. Except the smallest permeability by the sintered frit and the lowest breaking pressure by the single-particle frit, EOF mobility and peak dispersion of the multi-particle frit were at the same levels with the formers. In addition, all the three frits avoided bubble formation. It demonstrated that the multi-particle frits met the general requirements of permeability, mechanical resistance and efficiency for packing capillary microcolumns as well as the sintered frits and the single-particle frits. Thus, peak efficiency around 4.3 µm plate height (approximately 232,560 plates per meter) was obtained by multi-particle fritted capillary columns with electrokinetic packing, compared to 6.5 µm plate height by single-particle fritted columns with slurry pressure packing. In particular, the multi-particle fritting was simpler, faster, and more reproducible than the sintered fritting, and the multi-particle fritting was suitable to pack capillary columns of various capillary bore sizes owing to rich commercial resources of fritting particles of various diameters. Multi-particle fritted columns offered satisfactory run-to-run and column-to-column reproducibilities for retention factor, plate height and peak area (precisions of 4.1-9.3% for 10 replicated columns, and precisions of 0.9-3.1% for 30 replicated trials). They also had consistent CEC performance (differences of 1.1-3.9% between the first and 31 st day) during a lifetime more than one month. Application examples in packing capillary columns of 75 and 100 µm i.d. and CEC analysis of sixteen polycyclic aromatic hydrocarbons prove the diversity and reliability of the multi-particle fritting in column technology.

Enantioseparation of propranolol, amlodipine and metoprolol by electrochromatography using an open tubular capillary modified with ß-cyclodextrin and poly(glycidyl methacrylate) nanoparticles.

The inner wall of a capillary was coated with glycidyl methacrylate (GMA) to form tentacle-type coating, and poly(glycidyl methacrylate) nanoparticles (PGMA NPs) were then immobilized on the film. Ethanediamine-ß-cyclodextrin as chiral selector was covalently bonded into the PGMA NPs through the ring-open reaction. The materials were characterized by SEM, TEM and FT-IR. The modified column was applied to the enantioseparation of the racemates of propranolol, amlodipine and metoprolol. Compared to a capillary with a single layer of CD-PGMA (without GMA coating) and to a CD-GMA system (without PGMA nanoparticles), the performance of the capillary is strongly improved. The effects of buffer pH value and applied voltage were optimized. Best resolutions (propranolol: 1.27, metoprolol: 1.01 and amlodipine: 2.93) were obtained when using the PGMA-coated capillary system. The run-to-run, day-to-day and column-to-column reproducibility were tested and found to be highly attractive. The new stationary phase is likely to have a large potential and scope in that it may also be applied to chiral separations of other enantiomers, such as amino acids and biogenic amines. Graphical abstract Schematic presentation of the preparation of a capillary column with glycidyl methacrylate (GMA) coating which was then immobilized with poly(glycidyl methacrylate) nanoparticles and ethanediamine-ß-cyclodextrin. This novel open tubular column was applied to construct capillary electrochromatography system for separation of basic racemic drugs.

Development of novel on-line capillary gas chromatography-based analysis method for volatile organic compounds produced by aerobic fermentation.

Many volatile compounds, such as isoprene, a precursor used in the synthesis of natural rubber, have been produced through fermentation using genetically engineered microorganisms. Despite this biotechnological success, measuring the concentrations of volatile compounds during fermentation is difficult because of their high volatility. In current systems, off-line analytical methods usually lead to product loss, whereas on-line methods raise the production cost due to the requirement of complex devices. Here, we developed a novel on-line gas chromatography (GC)-based system for analyzing the concentration of isoprene with the aim to minimize the cost and requirement for devices as compared to current strategies. In this system, a programmable logic controller is used to combine conventional GC with a syringe pump module (SPM) directly connected to the exhaust pipe of the fermentor, and isoprene-containing samples are continuously pumped from the SPM into the GC using an air cylinder recycle stream. We showed that this novel system enables isoprene analysis during fermentation with convenient equipment and without the requirement of an expensive desorption tube. Furthermore, this system may be extended to the detection of other volatile organic compounds in fermentation or chemical processes.

Preparation of a polyhedral oligomeric silsesquioxanes hybrid monolith via a single-step ring-opening polymerization for pressurized capillary electrochromatography.

An organic-silica hybrid monolith was prepared by a single-step ring-opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxane (POSS-epoxy), polyethylenimine (PEI), and ß-cyclodextrin (ß-CD) in a ternary porogenic solvent consisting of polyethylene glycol, 1,4-butanediol, and 1-propanol. The framework of POSS-PEI hybrid monolith could offer well-defined 3D skeleton, while ß-CD with the ability of forming a host-guest inclusion complexes with a variety of compounds could show an ability of specific selection. The obtained hybrid monoliths were successfully applied for separation of phenols, benzoic acids, and nucleobases. Especially due to the introduction of ß-CD, positional isomers including hydroquinone and resorcinol, o-nitrophenol and p-nitrophenol, as well as p-chlorophenol and o-chlorophenol were baseline separated and the column efficiency reached 82 300 plates/m for hydroquinone.

The preparation of poly-levodopa coated capillary column for capillary electrochromatography enantioseparation.

Levodopa (L-DOPA) is promising as chiral stationary phase for open tubular capillary electrochromatography (OT-CEC) enantioseparation owing to its self-polymerization adhesive property and chiral recognition potential. In this work, CuSO4/H2O2 was used as a trigger agent to accelerate the polymerization process of L-DOPA and the poly-levodopa (poly-(L-DOPA)) coated column was successfully prepared for the first time by depositing it on the inner wall of fused silica capillary via the rapid and in-situ approach at room temperature. The performance of the poly-(L-DOPA) coated capillary was validated by the separation of different chiral analytes, including chiral amine drugs, neurotransmitters and amino acids, and the good enantioseparation efficiencies were achieved. For five consecutive runs, the relative standard deviations (RSDs) for the migration time of the analytes for intra-day, inter-day and column-to-column were in the range of 0.19-1.33%, 0.96-4.47%, and 2.21-7.79%, respectively. Additionally, the poly-(L-DOPA) coated capillary column could be successively used over 250 runs without observable change in the separation efficiency.