Finite element analysis of the treatment of a minimally invasive approach combined with a novel anatomical locking plate for scapular body fractures.

BACKGROUND: The minimally invasive approach for the treatment of displaced scapular neck or body fractures has the advantages of less trauma and minimal muscle dissection. In clinical practice, the minimally invasive approach combined with an anatomical locking plate has been used to treat scapular body fractures. In addition, we have made minor modifications to the minimally invasive approach. However, the biomechanical study about the approach combined with an anatomical locking plate in treating scapular body fractures was limited. METHODS: Finite element analysis (FEA) was used to conduct the biomechanical comparison between the anatomical locking plate (AP model) and reconstructive plate (RP model) in the treatment of scapular body fractures through the modified minimally invasive approach. A healthy male volunteer with no history of scapula or systemic diseases was recruited. High-resolution computed tomography images of his right scapula were obtained. Two scapula models were constructed and analyzed by the software of Mimics 21.0, Geomagic Wrap 2021, SolidWorks 2021, and ANSYS Workbench 2022, respectively. RESULTS: Through static structural analysis, in terms of equivalent von Mises stress, equivalent elastic strain, and total deformation, the AP model exhibited superior safety characteristics, enhanced flexibility, and anticipated stability compared with the RP model. This was evidenced by lower maximum stress, lower maximum strain and displacement. CONCLUSION: The minimally invasive approach combined with an anatomical locking plate for scapular body fractures had better biomechanical stability. The study provided a biomechanical basis to guide the clinical treatment of scapular body fractures.

Surface anatomy and levator scapulae muscle injection: A cadaveric investigation.

Accurate detection of the levator scapulae muscle is critical for effective diagnostic and therapeutic interventions. The commonly used surface anatomy approach has not been validated and is less accurate than ultrasound-guided techniques. Therefore, we determined the needle insertion point for the levator scapulae using a new technique based on the anatomy of the scapula. This investigation used 15 fresh-frozen cadavers to explore the relationship between the acromial angle and medial tip of the scapular spine (O) of the scapular spine. Based on the x-axis (the distance [L] from Point O to point acromial angle) and the y-axis perpendicular to the x-axis passing through Point O, the barycentric coordinates were determined through the intersections of each axis and the superior angle of the scapula with the levator scapulae. Various ratios involving the established distance L) were ascertained, we compared the measurements and ratios between the male and female groups, and the accuracy of the new technique was compared with the conventional technique. The optimal site of the new technique was within 6 to 7% of distance L on the x-axis and 42 to 44% of distance L on the y-axis. This technique was significantly more accurate than the conventional technique (P = .006). Although ultrasound allows for accurate injections via real-time visualization, its unavailability in some cases highlights the importance of understanding surface anatomy landmarks. Our new technique, based on the anatomy of the scapula and relative measurements, is more accurate than the conventional technique. This should enable more precise detection of the levator scapulae for accurate and efficient diagnostic and therapeutic procedures.

Evaluation of a method to quantify posture and scapula position using biplanar radiography.

BACKGROUND: Recent studies have stated the relevance of having new parameters to quantify the position and orientation of the scapula with patients standing upright. Although biplanar radiography can provide 3D reconstructions of the scapula and the spine, it is not yet possible to acquire these images with patients in the same position. METHODS: Two pairs of images were acquired, one for the 3D reconstruction of the spine and ribcage and one for the 3D reconstruction of the scapula. Following 3D reconstructions, scapular alignment was performed in two stages, a coarse alignment based on manual annotations of landmarks on the clavicle and pelvis, and an adjusted alignment. Clinical parameters were computed: protraction, internal rotation, tilt and upward rotation. Reproducibility was assessed on an in vivo dataset of upright biplanar radiographs. Accuracy was assessed using supine cadaveric CT-scans and digitally reconstructed radiographs. FINDINGS: The mean error was less than 2° for all clinical parameters, and the 95 % confidence interval for reproducibility ranged from 2.5° to 5.3°. INTERPRETATION: The confidence intervals were lower than the variability measured between participants for the clinical parameters assessed, which indicates that this method has the potential to detect different patterns in pathological populations.

Lateralising reverse shoulder arthroplasty using bony increased offset (BIO-RSA) or increasing glenoid component diameter: comparison of clinical, radiographic and patient reported outcomes in a matched cohort.

BACKGROUND: This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups. MATERIALS AND METHODS: All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere. Matched patients were invited for a follow-up visit. ROM was assessed as well as radiographic outcomes (lateralisation, distalisation, inferior overhang, scapular notching, heterotopic bone formation, radiolucency, stress shielding, bone graft healing and viability and complications) and patient-reported outcomes (subjective shoulder value, Constant score, American Shoulder and Elbow Surgeons, activities of daily living which require internal rotation, activities of daily living which require external rotation and a visual analogue scale for pain). Outcomes were compared between the two groups. RESULTS: In total, 38 BIO-RSAs with a size 38 glenosphere were matched to 38 regular RSAs with a size 42 glenosphere. Of the 76 matched patients, 74 could be contacted and 70 (95%) were included. At the final follow-up, there were no differences between the two groups in ROM, patient-reported outcomes or radiographic outcomes (p > 0.485). CONCLUSIONS: Using a larger glenosphere is a feasible alternative to BIO-RSA for lateralising RSA, providing comparable ROM, patient-reported and radiographic results, while potentially decreasing costs, operative time and complication rates.

Superior scapular location: An overlooked albeit frequent finding in elastofibroma dorsi.

PURPOSE: To explore the frequency of superior scapular elastofibroma dorsi in a large patient series with elastofibroma dorsi. METHODS: 136 chest CTs from January 2016 to July 2022 reporting elastofibroma dorsi were retrospectively analyzed. Three radiologists assessed the number, size, and location of elastofibroma dorsi. Continuous variables underwent two-tailed t-tests with p < 0.05. Inter-observer agreement was assessed by using Cohen's Kappa values. RESULTS: In 136 patients (mean age, 75.9 +/- 9.8 years; 117 female), 330 elastofibroma dorsi were found. Six (4.4 %) patients had single, 87 (64 %) double, 22 (16.2 %) triple and 21 (15.4 %) quadruple lesions. All single and double lesions were in the inferior scapular regions. 43 (31.6 %) patients had superior scapular lesions in addition to inferior scapular elastofibroma dorsi. Inferior scapular elastofibroma dorsi was significantly larger than superior scapular elastofibroma dorsi. The probability of a right superior lesion was significantly higher in patients with a larger right inferior lesion. Inter-observer agreement was very good for experienced radiologist (κ = 94.1) and good for other radiologists (κ = 79.4 and κ = 78). CONCLUSION: In contrast to current belief, superior scapular elastofibroma dorsi accompanying the typical inferior scapular lesions is not uncommon and can even manifest bilaterally. To the best of our knowledge, this is the first case series reporting prevalence of quadruple elastofibroma dorsi.

Age Estimation Based on Computed Tomography Analysis of the Scapula.

Background and Objectives: Age estimation from skeletal remains and in living individuals is an important issue for human identification, and also plays a critical role in judicial proceedings for migrants. Forensic analysis of ossification centers is the main evaluation method for age estimation, and ossification degree can be determined using computed tomography analysis. The purpose of this study is to investigate the applicability of CT (computed tomography) in the analysis of left scapula ossification centers, for forensic age estimation in Turkish society. Materials and Methods: We analyzed six ossification centers of the left scapula and these ossification centers are the coracoid, subcoracoid, coracoid apex, acromial, glenoid, and inferior angle ossification centers. A pediatric radiologist analyzed these six ossification centers of the scapula by using a staging method defined by Schmeling et al. in 2004. Two months after the first assessment, 20 randomly selected cases was reanalyzed by the first observer and by another pediatric radiologist. Correlation between the age and ossification stage was assessed using Spearman's nonparametric correlation test. Linear regression analysis was performed using a backwards model. Cohen's kappa coefficient was used for evaluating interobserver and intraobserver variability. Results: In this retrospective study, 397 (248 male and 149 female) cases were evaluated. Ages ranged between 7.1 and 30.9. The mean age was 19.83 ± 6.49. We determined a positive significant correlation between the age and the ossification stages of ossification centers analyzed in both sexes. In each ossification center, except inferior angle, all of the stage 1 and 2 cases in both sexes were under 18 years old. Intraobserver and interobserver evaluations showed that reproducibility and consistency of the method was relatively good. Conclusions: The present study indicated that CT analysis of scapula ossification centers might be helpful in forensic age assessment of living individuals and dry bones.

Ultrasound Evaluation and Guided Injection of the Subscapularis and Serratus Anterior Muscles Between the Scapula and the Thoracic Cage: A Technical Note.

Most subscapularis and serratus anterior muscles lie between the scapula and the thoracic cage. Evaluation of this area in patients with scapulothoracic dyskinesis, snapping scapular syndrome, or interscapular pain can provide valuable information to clinicians. However, ultrasound scanning of pathologies in this area is hindered by anatomical limitations. In this study, we described a simple patient setup position and scanning method for ultrasound evaluation and guided intervention of the subscapularis and serratus anterior muscles between the scapula and thoracic cage.

Neglected Sprengel's deformity in an 80-year-old female cadaver: a case report.

BACKGROUND: Sprengel's deformity is a congenital abnormality of the shoulder girdle. Because scapular retraction, such as the Green procedure, is usually performed during childhood to improve esthetics and shoulder function, Sprengel's deformity is rarely found in older patients. CASE PRESENTATION: We presented a unique case of a Japanese female cadaver with Sprengel's deformity at the age of 80 years. Anatomical dissection and radiological imaging revealed musculoskeletal anomalies associated with Sprengel's deformity, including Klippel-Feil syndrome, presence of an omovertebral bone, and absence of the trapezius muscle. In addition, bilateral cervical ribs were in contact with the brachial plexus. These anomalies may lead to numbness, pain, and limited range of motion of the neck and upper girdle with aging. CONCLUSIONS: Because most adult patients with Sprengel's deformity experience neck pain and limited movement of the shoulder, the presented case is a rare case of neglected Sprengel's deformity in an 80-year-old cadaver.

Scapula fractures: functional anatomy, clinical assessment and management.

Fractures of the scapula are rare injuries, accounting for 3-5% of all shoulder girdle fractures. They are frequently the result of high energy trauma and often present with concurrent and life-threatening injuries to adjacent structures, leading to significant morbidity and mortality. Patients presenting with scapula fractures must receive a thorough and systematic clinical assessment as directed by national trauma guidelines. Appropriate imaging is essential in delineating fracture morphology and should at the very least include anteroposterior, anteroposterior oblique (Grashey) and axillary or scapula 'Y' view of the shoulder. Computed tomography imaging with three-dimensional reconstruction allows better delineation of the fracture morphology and helps with surgical planning. A lack of randomised controlled trials comparing the efficacy of conservative and operative management of scapula fractures has resulted in limited consensus for surgical indications. Nevertheless, most extra-articular fractures can be managed conservatively while intra-articular fractures of the glenoid frequently require surgical fixation.

Treatment options and outcomes for delayed scapular anatomical neck fractures: a case report and review of the literature.

INTRODUCTION: Scapular anatomical neck fractures are among the most infrequent shoulder girdle fractures. Only seven radiologically confirmed cases of scapular anatomical neck fractures have been documented in the literature to date, of which only one case underwent delayed surgery. CASE PRESENTATION: A 34-year-old male Persian patient with morbid obesity was diagnosed with a scapula anatomical neck fracture after a motor vehicle collision. The radiographic assessment of the patient indicated an increase in the scapular glenopolar angle (73.9°). Due to concurrent chest and head injuries, surgical intervention was deferred until 6 weeks following the injury. The posterolateral limited Dupont-Evrard approach was used because of the patient's extremely high body mass index. Two plates were utilized to achieve stable fixation of the glenoid neck fracture. Following a 1 year follow-up period, complete fracture union was successfully attained, resulting in a constant score of 79. CONCLUSIONS: The most accurate radiographic indicators of these fractures are a superior fracture line located laterally to the coracoid process, a small inferior spike, and an elevated glenopolar angle. The only tendon attached to the glenoid is the long head of the triceps, making these fractures unstable; therefore, surgery is required in the majority of instances. The small size of the fractured component makes stabilization more difficult. Overall, anatomical scapular neck fractures are extremely uncommon and distinguished from other scapular fractures by their unique radiological and biomechanical characteristics. This case highlights the challenges encountered when managing scapular fractures in patients with morbid obesity. The delayed surgical intervention and the choice of surgical approach tailored to the patient's specific anatomical and physiological considerations proved to be effective in achieving a favorable outcome.

Posterior deltoid-sparing approach for displaced inferior or posterior glenoid fossa fractures: technical note and case series.

Scapular surgery has usually been performed through the posterior Judet approach. This approach allows access to the entire posterior scapular body, but causes significant soft tissue damage and detaches the deltoid muscle. To date, there has been no clinical study of a deltoid-preserving approach to access the joint for displaced postero-inferior glenoid fractures (Ideberg type II or Ib). We describe an easy and less invasive approach to the postero-inferior glenoid fossa.

Differences in Osseous Shoulder Morphology, Scapulothoracic Orientation, and Muscle Volume in Patients With Constitutional Static Posterior Shoulder Instability (Type C1) Compared With Healthy Controls.

BACKGROUND: Constitutional static posterior humeral decentering (type C1 according to ABC Classification) has been recognized as a pre-osteoarthritic deformity that may lead to early-onset posterior decentering osteoarthritis at a young age. Therefore, it is important to identify possible associations of this pathologic shoulder condition to find more effective treatment options. PURPOSE: To perform a comprehensive analysis of all parameters reported to be associated with a C1 shoulder-including the osseous shoulder morphology, scapulothoracic orientation, and the muscle volume of the shoulder girdle in a single patient cohort. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: A retrospective, comparative study was conducted analyzing 17 C1 shoulders in 10 patients who underwent magnetic resonance imaging (MRI) with the complete depiction of the trunk from the base of the skull to the iliac crest, including both humeri. The mean age of the patients was 33.5 years, and all patients were men. To measure and compare the osseous shoulder morphology (glenoid version, glenoid offset, humeral torsion, anterior acromial coverage, posterior acromial coverage, posterior acromial height, and posterior acromial tilt) and scapulothoracic orientation (scapular protraction, scapular internal rotation, scapular upward rotation, scapular translation, scapular tilt, and thoracic kyphosis), these patients were matched 1 to 4 according their age, sex, and affected side with shoulder-healthy patients who had received positron emission tomography (PET)-computed tomography. To measure and compare the muscle volume of the shoulder girdle (subscapularis, infraspinatus/teres minor, supraspinatus, trapezius, deltoid, latissimus dorsi/teres major, pectoralis major, and pectoralis minor), patients were matched 1 to 2 with patients who had received PET-MRI. Patients with visible pathologies of the upper extremities were excluded. RESULTS: The C1 group had a significantly higher glenoid retroversion, increased anterior glenoid offset, reduced humeral retrotorsion, increased anterior acromial coverage, reduced posterior acromial coverage, increased posterior acromial height, and increased posterior acromial tilt compared with controls (P < .05). Decreased humeral retrotorsion showed significant correlation with higher glenoid retroversion (r = -0.742; P < .001) and higher anterior glenoid offset (r = -0.757; P < .001). Significant differences were found regarding less scapular upward rotation, less scapular tilt, and less thoracic kyphosis in the C1 group (P < .05). The muscle volume of the trapezius and deltoid was significantly higher in the C1 group (P < .05). CONCLUSION: Patients with C1 shoulders differ from healthy controls regarding osseous scapular and humeral morphology, scapulothoracic orientation, and shoulder girdle muscle distribution. These differences may be crucial in understanding the delicate balance of glenohumeral centering.

A formula for instability-related bone loss: estimating glenoid width and redefining bare spot.

PURPOSE: The aim of the study reveals a new intuitive method for preoperatively assessing defect ratio in glenoid deficiency based on the native glenoid width and the bare spot. METHODS: A linear relationship, i.e. the rh formula, between the native glenoid width (2r) and height (h) was revealed by a cadaver cohort (n = 204). To validate the reliability of the rh formula, 280 3D-CT images of intact glenoids were recruited. To evaluate the accuracy of rh formula in estimating glenoid defect, the 65 anterior-inferior defect models were artificially established based on the 3D-CT images of intact glenoids. Moreover, a clinically common anterior-posterior (AP) method was compared with the rh formula, to verify the technical superiority of rh formula. RESULTS: The regression analysis indicated a linear relationship between the width and height of intact glenoid: 2r = 0.768 × h - 1.222 mm (R2 = 0.820, p < 0.001). An excellent reliability was found between the formula prediction and model width (ICC = 0.911, p = 0.266). An excellent agreement was found between the predicted values and model parameters (glenoid width, ICCrh = 0.967, prh = 0.778; defect ratio, prh = 0.572, ICCrh = 0.997). And, it is of higher accuracy compared to the AP method (glenoid width, ICCAP = 0.933, pAP = 0.001; defect ratio, ICCAP = 0.911, pAP = 0.033). CONCLUSION: Applying the cadaver-based formula on 3D-CT scans accurately predicts native glenoid width and redefines bare spot for preoperatively determining glenoid bone loss.

3D-printed glenoid implant reconstruction, after partial scapulectomy for malignant tumors: a case series.

PURPOSE: Glenoid tumors are extremely rare, and reconstruction remains very challenging. The aim of this study is to present the clinical and functional outcomes, of a new glenoid reconstruction method using 3-dimensional-printed implant. METHODS: Four patients with primary glenoid tumors underwent reconstruction using 3-dimensional-printed glenoid implant linked with reverse shoulder arthroplasty. We retrospectively reviewed the clinical and functional outcome, using MSTS and DASH score, as well as complications' rate. RESULTS: Wide excision was achieved in all patients. No local recurrence or distant metastasis was diagnosed at the follow-up period. The mean MSTS score was 80.5%, and DASH score was 15.2%. According to Hendersons' classification, there were no postoperative complications. CONCLUSION: The use of 3-dimensional-printed implants, can be a very reliable solution with satisfying clinical and functional outcomes for reconstruction, in patients with musculoskeletal malignancies of the glenoid. Level of evidence IV Treatment Study.

Effects of scapulo-humeral training on ultrasonographic and clinical evaluations in stroke: a randomized controlled trial.

BACKGROUND: After stroke, the effects of focused scapulo-humeral training with simultaneous assessment of the changes in shoulder subluxation, related muscle thicknesses and upper limb performance have not been studied in the literature. OBJECTIVES: This study aimed to investigate the effects of an 8-week scapulo-humeral training program in addition to conventional rehabilitation on upper extremity/trunk functions, shoulder pain, and sonographic measurements of the shoulder joint and periscapular muscles. METHODS: Thirty stroke individuals were randomly separated into two groups as Group I-scapulo-humeral training (5F/10 M) and Group II - control (5F/10 M). Conventional rehabilitation program was applied to both groups, and a scapulo-humeral training exercise protocol was added for the scapulo-humeral group. All the treatments were applied for 1 hour/day, 3 days/week, 8 weeks. Clinical evaluations were made using the Fugl Meyer Assessment-Upper Extremity(FMA-UE), Action Research Arm Test(ARAT), ABILHAND, Visual Analog Scale, and Trunk Impairment Scale(TIS). Ultrasound was used to measure serratus anterior/lower trapezius muscle thicknesses, and acromion-greater tubercule/acromio-humeral distances. RESULTS: FMA-UE, ARAT, ABILHAND and TIS scores increased in both groups, with greater increases in most parameters in the scapulo-humeral training group. Shoulder pain decreased only in the scapulo-humeral training group. Subacromial distances were decreased on the paretic side, and muscle thicknesses increased on both sides in the scapulo-humeral training group, and in the control group, only serratus anterior muscle thickness increased on the paretic side (p < 0.05 for all). CONCLUSIONS: Additional scapulo-humeral exercises to conventional rehabilitation was seen to improve upper extremity/trunk performance and shoulder pain, and to increase scapula stabilizer muscle thicknesses in stroke individuals with mild-moderate upper extremity disability.

Robert H. Cofield, MD, Award for Best Oral Presentation 2023: Up to 8 mm of glenoid-sided lateralization does not increase the risk of acromial or scapular spine stress fracture following reverse shoulder arthroplasty with a 135° inlay humeral component.

BACKGROUND: Glenoid-sided lateralization in reverse shoulder arthroplasty (RSA) decreases bony impingement and improves rotational range of motion, but has been theorized to increase the risk of acromial or scapular spine fractures (ASFs). The purpose of this study was to assess if glenoid-sided lateralization even up to 8 mm increases the risk for stress fracture following RSA with a 135° inlay humeral component. METHODS: A retrospective review was performed from a multicenter prospectively collected database on patients who underwent primary RSA from 2015 to 2021. All RSAs were performed with a 135° inlay humeral component. Varying amounts of glenoid lateralization were used from 0 to 8 mm. Preoperative radiographs were reviewed for the presence of acromial thinning, acromiohumeral distance (AHD), and inclination. Postoperative implant position (distalization, lateralization, and inclination) as well as the presence of ASF was evaluated on minimum 1-year postoperative radiographs. Regression analyses were performed on component and clinical variables to assess for factors predictive of ASF. RESULTS: Acromial or scapular spine fractures were identified in 26 of 470 shoulders (5.5%). Glenoid-sided lateralization was not associated with ASF risk (P = .890). Furthermore, the incidence of fracture did not vary based on glenoid-sided lateralization (0-2 mm, 7.4%; 4 mm, 5.6%; 6 mm, 4.4%; 8 mm, 6.0%; P > .05 for all comparisons). RSA on the dominant extremity was predictive of fracture (odds ratio [OR] 2.21, 95% confidence interval [CI] 1.20-5.75; P = .037), but there was no relationship between patient age, sex, preoperative acromial thinning, or diagnosis and risk of fracture. Although there was no difference in mean postoperative AHD between groups (P = .443), the pre- to postoperative delta AHD was higher in the stress fracture group (2.0 ± 0.7 cm vs. 1.7 ± 0.7 cm; P = .015). For every centimeter increase in delta AHD, there was a 121% increased risk for fracture (OR 2.21, 95% CI 1.33-3.68; P = .012). Additionally, for every 1-mm increase in inferior glenosphere overhang, there was a 19% increase in fracture risk (P = .025). CONCLUSION: Up to 8 mm of glenoid-sided metallic lateralization does not appear to increase the risk of ASF when combined with a 135° inlay humeral implant. Humeral distalization increases the risk of ASF, particularly when there is a larger change between pre- and postoperative AHD or higher inferior glenosphere overhang. In cases of pronounced preoperative superior humeral migration, it may be a consideration to avoid excessive postoperative distalization, but minimizing bony impingement via glenoid-sided lateralization appears to be safe.

Scapular Osteotomy for Lateral Access to a T1-2 Foraminal Disc Extrusion, Treated by Mini-Hemilaminectomy in a Dog.

A 4-year-old female spayed French bulldog was presented with a 2-day history of neck pain and left thoracic limb lameness with no neurological deficits. A computed tomography (CT) examination showed a left foraminal T1-2 disc extrusion. Surgical management was performed using a left lateral approach to the vertebral column with a scapular osteotomy. A T1-2 mini-hemilaminectomy was performed. The scapular osteotomy was stabilized with two 2.4-mm locking compression plates. The postoperative CT and radiographic examinations showed adequate decompression of the T1-2 foramen and good reduction in the scapular osteotomy. The dog was able to walk the following day. At the 1-month follow-up, the dog had no neck pain but persistent slight left thoracic limb lameness. Ten months postoperatively, a CT scan showed no abnormalities at the surgical site, and the dog had no neurological deficits nor lameness. The aim of this case report was to describe a new lateral approach to T1-2 intervertebral space.