Paediatric excipient risk assessment (PERA) tool and application for selecting appropriate excipients for paediatric dosage forms - Part 2.

It is necessary to use a scientifically sound process for excipient risk evaluation, selection, and management in order to develop paediatric medicinal products that are both safe and effective. The "Paediatric Excipient Risk Assessment (PERA)" framework, which proposes a comprehensive approach by considering all relevant factors related to patient, dosage form, and excipient attributes, was developed and published as part 1 of this paper series, to enable the rational selection of excipients for paediatric medicinal products. This article is Part 2 of the series and presents the PERA tool that allows easy adoption of the PERA framework. Using a straightforward heat map scoring approach (Red, Yellow, and Green category) for risk evaluation, the PERA tool can be used to compare and choose excipients. The PERA tool will help users identify potential gaps in excipients information that will help with risk-based mitigation planning. Several case studies covering frequently used and novel excipients for oral, as well as the choice of excipient for parenteral products for neonatal administration, serve to illustrate the PERA tool's usefulness.

Preformulation studies for the development of a microemulsion formulation from Ambrosia peruviana All, with anti-inflammatory effect

Abstract Natural products are considered an important source of the therapeutic arsenal currently available. Among these alternatives are the seeds of Ambrosia peruviana (altamisa), whose extract has shown an anti-inflammatory effect. The main objective of this work was to perform a preformulation study of Ambrosia peruviana seeds ethanolic extract, where the main factors that affect the physical, chemical, and pharmacological stability of the extract were evaluated, as well as a compatibility study by differential scanning calorimetry (DSC) analysis against different excipients. A dry extract was obtained by rotary evaporation of the seeds macerated with 96% ethanol. The anti-inflammatory activity was determined by measuring its effect on NO production in RAW 264.7 macrophages, stimulated with LPS. The results showed that the dry extract maintained its stability over time when stored at a temperature of 4 and 25ºC, demonstrating its biological activity, the content of phenolic compounds, and its physicochemical parameters remain practically invariable. However, when exposed to high temperatures (60 ºC) it was affected. The thermal analysis revelated that the behavior of most of the selected excipients and the dry extract was maintained, which indicates that it did not present incompatibilities, therefore they can be candidates for formulating a microemulsion.

Impact of co-administered stabilizers on the biopharmaceutical performance of regorafenib amorphous solid dispersions.

Poor solubility of drug candidates is a well-known and thoroughly studied challenge in the development of oral dosage forms. One important approach to tackle this challenge is the formulation as an amorphous solid dispersion (ASD). To reach the desired biopharmaceutical improvement a high supersaturation has to be reached quickly and then be conserved long enough for absorption to take place. In the presented study, various formulations of regorafenib have been produced and characterized in biorelevant in-vitro experiments. Povidone-based formulations, which are equivalent to the marketed product Stivarga®, showed a fast drug release but limited stability and robustness after that. In contrast, HPMCAS-based formulations exhibited excellent stability of the supersaturated solution, but unacceptably slow drug release. The attempt to combine the desired attributes of both formulations by producing a ternary ASD failed. Only co-administration of HPMCAS as an external stabilizer to the rapidly releasing Povidone-based ASDs led to the desired dissolution profile and high robustness. This optimized formulation was tested in a pharmacokinetic animal model using Wistar rats. Despite the promising in-vitro results, the new formulation did not perform better in the animal model. No differences in AUC could be detected when compared to the conventional (marketed) formulation. These data represent to first in-vivo study of the new concept of external stabilization of ASDs. Subsequent in-vitro studies revealed that temporary exposure of the ASD to gastric medium had a significant and long-lasting effect on the dissolution performance and externally administered stabilizer could not prevent this sufficiently. By applying the co-administered HPMCAS as an enteric coating onto Stivarga tablets, a new bi-functional approach was realized. This approach achieved the desired tailoring of the dissolution profile and high robustness against gastric medium as well as against seeding.

Interaction of Commonly Used Oral Molecular Excipients with P-glycoprotein.

P-glycoprotein (P-gp) plays a critical role in drug oral bioavailability, and modulation of this transporter can alter the safety and/or efficacy profile of substrate drugs. Individual oral molecular excipients that inhibit P-gp function have been considered a mechanism for improving drug absorption, but a systematic evaluation of the interaction of excipients with P-gp is critical for informed selection of optimal formulations of proprietary and generic drug products. A library of 123 oral molecular excipients was screened for their ability to inhibit P-gp in two orthogonal cell-based assays. ß-Cyclodextrin and light green SF yellowish were identified as modest inhibitors of P-gp with IC50 values of 168 µM (95% CI, 118-251 µM) and 204 µM (95% CI, 5.9-1745 µM), respectively. The lack of effect of most of the tested excipients on P-gp transport provides a wide selection of excipients for inclusion in oral formulations with minimal risk of influencing the oral bioavailability of P-gp substrates.

Amoxicillin chewable tablets intended for pediatric use: formulation development, stability evaluation and taste assessment.

To cover the unpleasant taste of amoxicillin (250 mg), maize starch (baby food) and milk chocolate were co-formulated. The raw materials and the final formulations were characterized by means of Dynamic Light Scattering (DLS), Differential Scanning Calorimetry (DSC) and Fourier-Transform Infrared (FT-IR) spectroscopy. To evaluate the taste masking two different groups of volunteers were used, according to the Ethical Research Committee of the Aristotle University of Thessaloniki. The optimization of excipients' content in the tablet was determined by experimental design methodology (crossed D-optimal). Due to the matrix complexity, amoxicillin was extracted using liquid extraction and analyzed isocratically by HPLC. The developed chromatographic method was validated (%Recovery 98.7-101.3, %RSD = 1.3, LOD and LOQ 0.15 and 0.45 µg mL-1 respectively) according to the International Conference on Harmonization (ICH) guidelines. The physicochemical properties of the tablets were also examined demonstrating satisfactory quality characteristics (diameter: 15 mm, thickness: 6 mm, hardness <98 Newton, loss of mass <1.0%, disintegration time ∼25min). Additionally, dissolution (%Recovery >90) and in vitro digestion tests (%Recovery >95) were carried out. Stability experiments indicated that amoxicillin is stable in the prepared formulations for at least one year (%Recovery <91).

Formulation development and in-vitro evaluation of gastroretentive drug delivery system of loxoprofen sodium: A natural excipients based approach.

The limitations of conventional type delivery systems to retain drug (s) in the stomach has resulted in the development of novel gastroretentive drug delivery system. We developed single-layer effervescent floating tablets of loxoprofen sodium for prolong delivery in the stomach using natural polymers xanthan gum, guar gum and semisynthetic polymer HPMCK4M. All the formulations (F1-F9) were developed by varying concentrations of xanthan gum and HPMCK4M while guar gum concentration was kept constant. Two gas generating agent (s) incorporated were sodium bicarbonate and citric acid. All compendial pre and post-compression tests results were in the acceptable limits. FTIR analysis confirmed drug-polymer compatibility. The in-vitro drug release in simulated conditions i.e., 0.1 N HCl for 12 h revealed orderly increase in total floating time, i.e., less than 6 h for F1 over 12 h for F9. Formulations F1 to F4 were not capable to retard drug release up to 12 h, whereas F5-F7 for 12 h, while F8 and F9 for more than 12 h. Data fitting in various kinetic models showed that drug release best fit in first order kinetic model and F9 in zero order. Based on results data, F7 was the best among all.

Inhalable nanocatchers for SARS-CoV-2 inhibition.

The global coronavirus disease 2019 (COVID-19) pandemic, caused by severe acute respiratory syndrome (SARS)-like coronavirus (SARS-CoV-2), presents an urgent health crisis. More recently, an increasing number of mutated strains of SARS-CoV-2 have been identified globally. Such mutations, especially those on the spike glycoprotein to render its higher binding affinity to human angiotensin-converting enzyme II (hACE2) receptors, not only resulted in higher transmission of SARS-CoV-2 but also raised serious concerns regarding the efficacies of vaccines against mutated viruses. Since ACE2 is the virus-binding protein on human cells regardless of viral mutations, we design hACE2-containing nanocatchers (NCs) as the competitor with host cells for virus binding to protect cells from SARS-CoV-2 infection. The hACE2-containing NCs, derived from the cellular membrane of genetically engineered cells stably expressing hACE2, exhibited excellent neutralization ability against pseudoviruses of both wild-type SARS-CoV-2 and the D614G variant. To prevent SARS-CoV-2 infections in the lung, the most vulnerable organ for COVID-19, we develop an inhalable formulation by mixing hACE2-containing NCs with mucoadhesive excipient hyaluronic acid, the latter of which could significantly prolong the retention of NCs in the lung after inhalation. Excitingly, inhalation of our formulation could lead to potent pseudovirus inhibition ability in hACE2-expressing mouse model, without imposing any appreciable side effects. Importantly, our inhalable hACE2-containing NCs in the lyophilized formulation would allow long-term storage, facilitating their future clinical use. Thus, this work may provide an alternative tactic to inhibit SARS-CoV-2 infections even with different mutations, exhibiting great potential for treatment of the ongoing COVID-19 epidemic.

Vaccine allergy: evidence to consider for COVID-19 vaccines.

PURPOSE OF REVIEW: Whereas the COVID-19 pandemic has changed our lives worldwide, we hope that vaccination can combat the disease. We propose how to evaluate suspected severe allergic reactions to the vaccines so that as many as possible may be safely vaccinated. RECENT FINDINGS: Rare cases of severe allergic reactions after COVID-19 vaccination have been observed, seemingly at a higher frequency than for other vaccines. Few excipients are likely to have caused these reactions. IgE-mediated reactions to polyethylene glycol (PEG) and its derivatives are the most suspected, albeit hitherto unproven, causes. We suggest to make a diagnosis based on skin tests with PEG and PEG derivatives and that these be considered in relation to the decisions required before the first and the second vaccine dose. A vaccine without these excipients is available, but published data about its side effects are limited. SUMMARY: The underlying immunological mechanisms of the rare severe allergic reactions to the COVID-19 vaccines are poorly understood and need to be clarified. Identifying those who have an undiagnosed allergy to PEG and PEG derivatives is crucial before vaccination, and these substances are found in laxatives, cosmetics and in 30% of all our medications today.

Lipophilic Salts and Lipid-Based Formulations: Enhancing the Oral Delivery of Octreotide.

PURPOSE: Successful oral peptide delivery faces two major hurdles: low enzymatic stability in the gastro-intestinal lumen and poor intestinal membrane permeability. While lipid-based formulations (LBF) have the potential to overcome these barriers, effective formulation of peptides remains challenging. Lipophilic salt (LS) technology can increase the apparent lipophilicity of peptides, making them more suitable for LBF. METHODS: As a model therapeutic peptide, octreotide (OCT) was converted to the docusate LS (OCT.DoS2), and compared to the commercial acetate salt (OCT.OAc2) in oral absorption studies and related in vitro studies, including parallel artificial membrane permeability assay (PAMPA), Caco-2, in situ intestine perfusion, and simulated digestion in vitro models. The in vivo oral absorption of OCT.DoS2 and OCT.OAc2 formulated in self-emulsifying drug delivery systems (SEDDS) was studied in rats. RESULTS: LS formulation improved the solubility and loading of OCT in LBF excipients and OCT.DoS2 in combination with SEDDS showed higher OCT absorption than the acetate comparator in the in vivo studies in rats. The Caco-2 and in situ intestine perfusion models indicated no increases in permeability for OCT.DoS2. However, the in vitro digestion studies showed reduced enzymatic degradation of OCT.DoS2 when formulated in the SEDDS formulations. Further in vitro dissociation and release studies suggest that the enhanced bioavailability of OCT from SEDDS-incorporating OCT.DoS2 is likely a result of higher partitioning into and prolonged retention within lipid colloid structures. CONCLUSION: The combination of LS and LBF enhanced the in vivo oral absorption of OCT primarily via the protective effect of LBF sheltering the peptide from gastrointestinal degradation.

The combination of an innovative dry powder for inhalation and a standard cisplatin-based chemotherapy in view of therapeutic intensification against lung tumours.

Cisplatin is one of the most commonly used chemotherapy in lung cancer despite its high nephrotoxicity leading to an administration only every 3-4 weeks. This study is the first report of a preclinical investigation of therapeutic intensification combining a cisplatin dry powder for inhalation (CIS-DPI) with an intravenous (iv) cisplatin-based treatment. CIS-DPI with 50% cisplatin content (CIS-DPI-50) was developed using lipid excipients through scalable processes (high-speed and high-pressure homogenization and spray-drying). CIS-DPI-50 showed good aerodynamic performance (fine particle fraction of ~ 55% and a mass median aerodynamic particle size of ~ 2 µm) and a seven-fold increase and decrease in Cmax in the lungs and in plasma, respectively, in comparison with an iv cisplatin solution (CIS-iv) in healthy mice. Finally, the addition of CIS-DPI-50 to the standard cisplatin/paclitaxel iv doublet increased the response rate (67% vs 50%), decreased the tumour growth and prolonged the median survival (31 vs 21 days), compared to the iv doublet in the M109 lung carcinoma model tending to demonstrate a therapeutic intensification of cisplatin.

Allergy to COVID-19 vaccines: A current update.

Adverse allergic reactions due to the administration of the vaccines developed for the protection of coronavirus disease 2019 (COVID-19) have been reported since the initiation of the vaccination campaigns. Current analyses provided by the Center for Disease Control and Prevention (CDC) and Food and Drug Administration (FDA) in the United States have estimated the rates of anaphylactic reactions in 2.5 and 11.1 per million of mRNA-1273 and BNT162b2 vaccines administered, respectively. Although rather low, such rates could have importance due to the uncommon fact that a large majority of the world population will be subjected to vaccination with the aforementioned vaccines in the following months and vaccination will most likely be necessary every season as for influenza vaccines. Health regulators have advised that any subject with a previous history of allergy to drugs or any component of the vaccines should not be vaccinated, however, certain misunderstanding exists since allergy to specific excipients in drugs and vaccines are in occasions misdiagnosed due to an absence of suspicion to specific excipients as allergenic triggers or due to inaccurate labeling or nomenclature. In this review, we provide an updated revision of the most current data regarding the anaphylactic reactions described for BNT162b2 vaccine, mRNA-1273 vaccine, and AZD1222 vaccine. We extensively describe the different excipients in the vaccines with the potential to elicit systemic allergic reactions such as polyethylene glycol (PEG), polysorbates, tromethamine/trometamol, and others and the possible immunological mechanisms involved.

Performance of Low Air Volume Dry Powder Inhalers (LV-DPI) when Aerosolizing Excipient Enhanced Growth (EEG) Surfactant Powder Formulations.

Efficient delivery of dry powder aerosols dispersed with low volumes of air is challenging. This study aims to develop an efficient dry powder inhaler (DPI) capable of delivering spray-dried Survanta-EEG powders (3-10 mg) with a low volume (3 mL) of dispersion air. A series of iterative design modifications were made to a base low air volume actuated DPI. The modifications included the replacement of the original capsule chamber with an integral dose containment chamber, alteration of the entrainment air flow path through the device (from single-sided (SS) to straight through (ST)), change in the number of air inlet holes (from one to three), varying the outlet delivery tube length (45, 55, and 90 mm) and internal diameter (0.60, 0.89, and 1.17 mm). The modified devices were evaluated by determining the influence of the modifications and powder fill mass on aerosol performance of spray-dried Survanta-EEG powders. The optimal DPI was also evaluated for its ability to aerosolize a micronized powder. The optimized dose containment unit DPI had a 0.21 mL powder chamber, ST airflow path, three-0.60 mm air inlet holes, and 90 mm outlet delivery tube with 0.89 mm internal diameter. The powder dispersion characteristics of the optimal device were independent of fill mass with good powder emptying in one 3 mL actuation. At 10 mg fill mass, this device had an emitted mass of 5.3 mg with an aerosol Dv50 of 2.7 µm. After three 3 mL actuations, >85% of the spray-dried powder was emitted from the device. The emitted mass of the optimal device with micronized albuterol sulfate was >72% of the nominal fill mass of 10 mg in one 3 mL actuation. Design optimization produced a DPI capable of efficient performance with a dispersion air volume of 3 mL to aerosolize Survanta-EEG powders.

Preparation and evaluation of vancomycin spray-dried powders for pulmonary delivery.

The aim of the current study was to achieve a dry powder formulation of vancomycin by spray drying whilst evaluating the effect of pH and excipient type and percentage used in formulation on particle characteristics and aerosolization performance. A D-optimal design was applied to optimize the formulation comprising vancomycin and two main excipient groups; a carbohydrate bulking agent (lactose, mannitol or trehalose) and a second excipient (hydroxypropyl beta-cyclodextrin or L-leucine) at pH 4 and 7. The physicochemical properties of particles (size, morphology, crystallinity state, residual moisture content), stability, and aerosolization characteristics were investigated. Using the combination of two excipients increased the fine particle fraction of powder emitted from an Aerolizer® device at a flow rate of 60 L/min. Hydroxypropyl beta-cyclodextrin showed more potential than L-leucine in aerosolization capabilities. Stability studies over 3 months of storage in 40 °C and 75% relative humidity suggested a good physical stability of the optimized formulation containing 17.39% hydroxypropyl beta-cyclodextrin along with 29.61% trehalose relative to the amount of drug at pH 4. Use of two excipients including trehalose and hydroxypropyl beta-cyclodextrin with a total weight ratio of 47% relative to the amount of drug is appropriate for the preparation of vancomycin dry powder formulation for inhalation.

Liqui-Tablet: the Innovative Oral Dosage Form Using the Newly Developed Liqui-Mass Technology.

In this study, an attempt was made to produce Liqui-Tablets for the first time. This was carried out through the compaction of naproxen Liqui-Pellets. The incentive to convert the novel Liqui-Pellet into Liqui-Tablet was due to the array of inherent advantages of the popular and preferred tablet dosage form. The study showed that naproxen Liqui-Tablet could be successfully produced and the rapid drug release rate (100% drug release ~ 20 min) could be achieved under pH 1.2, where naproxen is insoluble. It was observed that the different pH of the dissolution medium affected the trend of drug release from formulations with varying amounts of liquid vehicle. The order of the fastest drug-releasing formulations was different depending on the pH used. The presence of Neusilin US2 showed considerable enhancement in the drug release rate as well as improving Liqui-Tablet robustness and hardness. Furthermore, images from X-ray micro-tomography displayed a uniform distribution of components in the Liqui-Tablet. The accelerated stability studies showed acceptable stability in terms of dissolution profile.

Efficacy of a Quail Eggs-Based Dietary Supplement for Allergic Rhinitis: Results of a Single-Arm Trial.

Previous data suggested the potential treatment effect of a proprietary quail eggs-based blend on allergic rhinitis (AR) symptoms, induced by allergen challenge. We herein aimed to investigate the efficacy and safety of a similar dietary supplement, comprising the bioactive ingredients of quail eggs and the zinc mineral, in the setting of active AR. Adult patients (n = 77), aged 18- 60 years, with mild, intermittent AR were enrolled in this single-arm, open-label trial. Patients' responses were assessed based on peak nasal inspiratory flow (PNIF) measurements at two visits (Day 1/Visit 1 and Day 7/Visit 2) and self-rating of AR-associated symptoms on a Visual Analog Scale (VAS) throughout the entire 7-day study period. PNIF values at 15, 30, 60, 90 and 120 min (Visit 1) following administration of an oral dose of the study product were the primary efficacy endpoint. PNIF values (Visit 1) gradually increased from baseline (pre-treatment), with statistical significance first reached 30 min later (p = 0.002). VAS scores (Visit 1) for all AR symptoms gradually decreased with statistical significance first reached at 15 min (rhinorrhea, p = 0.042; itchy nose, p = 0.001; sneezing p < 0.001), 30 min (nasal congestion, p < 0.001; itchy eyes, p = 0.003) or 60 min (watery eyes, p = 0.04). PNIF improvement and decline of VAS scores were significantly more apparent at Visit one vs. Visit 2. Treatment-emergent adverse events were limited to cough and muscle strain (one patient each). Our results support the efficacy, rapid mode of action and tolerability of the investigated product for symptomatic treatment of mild intermittent AR.

Impact of acidity regulator and excipient nutrients on digestive solubility and intestinal transport of calcium from calcium phosphate and carbonate.

The aim of the current study was to investigate the effect of an acidity regulator (SPORIX®), lactose, and vitamin D3 as excipient ingredients on digestive solubility and intestinal transport of calcium from four different calcium materials (tricalcium phosphate (TCP), fish bone (FB), nano-fish bone (NFB), and algae calcium (AC)) through an in vitro digestion model system combined with Caco-2 cells. The concentration of ionized calcium (Ca2+) in an aqueous fraction after in vitro digestion increased with the addition of SPORIX®, and it was further enhanced by adding SPORIX® + lactose + vitamin D3 into TCP, FB, NFB, and AC, respectively. In particular, FB with SPORIX® + lactose + vitamin D3 enhanced calcium ionization to 33.89 ± 0.69 mg g-1, which was about 11.76 times higher than that of FB only. In the case of intestinal cellular uptake of calcium, there was no significant difference in all the tested calcium materials with SPORIX® + lactose + vitamin D3. However, the absolute amount of intestinal transport of calcium in FB (43.95 ± 3.29 µg) was significantly higher than other calcium materials with the addition of SPORIX® + lactose + vitamin D3 (p < 0.05). This study suggests that the co-consumption of SPORIX®, lactose, and vitamin D3 with FB could enhance the calcium bioavailability by lowering pH as well as improving calcium intestinal transport by modulating the paracellular and transcellular uptake mechanism.

Safe, swallowable and palatable paediatric mini-tablet formulations for a WHO model list of essential medicines for children compound - A promising starting point for future PUMA applications.

More than 10 years after the Paediatric Regulation came into place there is still a strong need for paediatric medicines for off-patent drug substances. Numerous compounds for which a paediatric formulation does not exist can be found on the WHO Model List of Essential Medicines for Children and in the EMA Inventory of the Needs for Paediatric Medicines. Many of these compounds are off patent, which offers the opportunity for obtaining marketing authorisations for paediatric use. The present study focused on the development of paediatric immediate-release mini-tablet formulations for furosemide. Essential formulation criteria included the use of excipients that are regarded as safe for children, the ease of manufacturing, a high dose flexibility, fast disintegration, a robust drug release and a good acceptability. Only excipients regarded as safe for use in children were used in formulation screening. Compressibility, tablet hardness, disintegration and palatability were the main screening parameters. Formulations with a hardness of  > 20 N, a disintegration time < 3 min (fast disintegration) and a good palatability were selected for mini-tablet production. Based on this pre-assessment two mini-tablet formulations with a furosemide drug load of 2.5 mg were developed. Both were easy to manufacture, had an appropriate hardness, a short disintegration time and met pharmacopoeial requirements with regard to content uniformity and physical testing. Biorelevant in vitro dissolution experiments mimicking different modes (with water or dosing vehicles) of administering age-appropriate furosemide doses to children of different age groups indicated a fast and robust drug release. Overall, the novel mini-tablet formulations present with an increased dose flexibility, excipient safety, swallowability and palatability and are thus a promising starting point for the development of solid oral dosage forms for drugs with paediatric therapeutic needs.

Soluplus-Mediated Diosgenin Amorphous Solid Dispersion with High Solubility and High Stability: Development, Characterization and Oral Bioavailability.

BACKGROUND AND PURPOSE: The traditional Chinese medicine, diosgenin (Dio), has attracted increasing attention because it possesses various therapeutic effects, including anti-tumor, anti-infective and anti-allergic properties. However, the commercial application of Dio is limited by its extremely low aqueous solubility and inferior bioavailability in vivo. Soluplus, a novel excipient, has great solubilization and capacity of crystallization inhibition. The purpose of this study was to prepare Soluplus-mediated Dio amorphous solid dispersions (ASDs) to improve its solubility, bioavailability and stability. METHODS: The crystallization inhibition studies were firstly carried out to select excipients using a solvent shift method. According to solubility and dissolution results, the preparation methods and the ratios of drug to excipient were further optimized. The interaction between Dio and Soluplus was characterized by differential scanning calorimetry (DSC), fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), powder X-ray diffraction (PXRD) and molecular docking. The pharmacokinetic study was conducted to explore the potential of Dio ASDs for oral administration. Furthermore, the long-term stability of Dio ASDs was also investigated. RESULTS: Soluplus was preliminarily selected from various excipients because of its potential to improve solubility and stability. The optimized ASDs significantly improved the aqueous solubility of Dio due to its amorphization and the molecular interactions between Dio and Soluplus, as evidenced by dissolution test in vitro, DSC, FT-IR spectroscopy, SEM, PXRD and molecular docking technique. Furthermore, pharmacokinetic studies in rats revealed that the bioavailability of Dio from ASDs was improved about 5 times. In addition, Dio ASDs were stable when stored at 40°C and 75% humidity for 6 months. CONCLUSION: These results indicated that Dio ASDs, with its high solubility, high bioavailability and high stability, would open a promising way in pharmaceutical applications.

The Effects of Dose Volume and Excipient Dose on Luminal Concentration and Oral Drug Absorption.

Excipient concentrations in the gastrointestinal luminal fluids can influence the absorption of poorly water-soluble drugs when dosed orally with solubilizing excipients, and poorly permeable drugs when dosed with permeation-enhancing excipients. This report examines how dose volume, excipient dose level, volume of water chaser, and gastric fluid volume influence luminal excipient concentrations, and how these could differ from preclinical species and humans. Gastric concentrations of excipient resulting immediately after dosing typical formulations containing a solubilizing excipient are estimated in preclinical species and humans. Examples of the effects of excipient dose and dose volume on drug absorption are illustrated using cases in the literature. When estimating human absorption potential of poorly soluble drug candidates from solubility data, in vitro dissolution models, physiologically based pharmacokinetic models, or preclinical pharmacokinetic data, it may be useful to consider the dose volume and excipient dose, and it is recommended to include estimated luminal excipient concentrations as a factor. There is a need for further studies collecting data on excipient concentrations in luminal fluids and evaluating the effects on drug absorption.

Comparison of Different Liquid and Semisolid Vehicles Selected for Oral Administration of Pellets and Minitablets with Diazepam: In Vitro Investigation.

The acceptability and palatability of a dosage form are extremely important to improve patient compliance. Mixing oral solid dosage forms with food carriers is often necessary to ease swallowing and provide the taste-masking effect. The present research investigated how a liquid or semisolid carrier influences the disintegration time and drug dissolution rate of pellets and minitablets with diazepam. The disintegration of pellets and minitablets in liquid carriers (water, milk and apple juice) was determined using a texture analyser. Dissolution tests were performed for the dosage forms dispersed in gel vehicles (2% carmellose and 0.5% carbomer gels) or applesauce. The disintegration of minitablets in water and apple juice was fast (1 min), but it slowed to 3 and 5 min in milk and gel vehicles, respectively. The pellets disintegrated in liquid carriers within 3 min. The drug dissolution rate in 0.1 M HCl depended on the gel viscosity in this medium. The preserved high viscosity of a carmellose gel inhibited the dissolution of diazepam. On the other hand, the viscosity of the carbomer gel decreased rapidly, and in effect, the dissolution rate of diazepam from the incorporated pellets or minitablets was comparable to the dissolution from loose pellets or minitablets. Graphical abstract.