The functions of laccase gene GhLAC15 in fiber colouration and development in brown-colored cotton.

The monotonicity of color type in naturally colored cottons (NCCs) has become the main limiting factor to their widespread use, simultaneously coexisting with poor fiber quality. The synchronous improvement of fiber quality and color become more urgent and crucial as the demand for sustainable development increases. The homologous gene of wild cotton Gossypium stocksii LAC15 in G. hirsutum, GhLAC15, was also dominantly expressed in the developing fibers of brown cotton XC20 from 5 DPA (day post anthesis) to 25 DPA, especially at the secondary cell wall thickening stage (20 DPA and 25 DPA). In XC20 plants with downregulated GhLAC15 (GhLAC15i), a remarkable reduction in proanthocyanidins (PAs) and lignin contents was observed. Some of the key genes in the phenylpropane and flavonoid biosynthesis pathway were down-regulated in GhLAC15i plants. Notably, the fiber length of GhLAC15i plants showed an obvious increase and the fiber color was lightened. Moreover, we found that the thickness of cotton fiber cell wall was decreased in GhLAC15i plants and the fiber surface became smoother compared to that of WT. Taken together, this study revealed that GhLAC15 played an important role in PAs and lignin biosynthesis in naturally colored cotton fibers. It might mediate fiber color and fiber quality by catalyzing PAs oxidation and lignin polymerization, ultimately regulating fiber colouration and development.

Exploring the plasmodesmata callose-binding protein gene family in upland cotton: unraveling insights for enhancing fiber length.

Plasmodesmata are transmembrane channels embedded within the cell wall that can facilitate the intercellular communication in plants. Plasmodesmata callose-binding (PDCB) protein that associates with the plasmodesmata contributes to cell wall extension. Given that the elongation of cotton fiber cells correlates with the dynamics of the cell wall, this protein can be related to the cotton fiber elongation. This study sought to identify PDCB family members within the Gossypium. hirsutum genome and to elucidate their expression profiles. A total of 45 distinct family members were observed through the identification and screening processes. The analysis of their physicochemical properties revealed the similarity in the amino acid composition and molecular weight across most members. The phylogenetic analysis facilitated the construction of an evolutionary tree, categorizing these members into five groups mainly distributed on 20 chromosomes. The fine mapping results facilitated a tissue-specific examination of group V, revealing that the expression level of GhPDCB9 peaked five days after flowering. The VIGS experiments resulted in a marked decrease in the gene expression level and a significant reduction in the mature fiber length, averaging a shortening of 1.43-4.77 mm. The results indicated that GhPDCB9 played a pivotal role in the cotton fiber development and served as a candidate for enhancing cotton yield.

Synthesis of a novel Si-N-S flame retardant and its application on cotton cellulose biomacromolecule.

A novel flame retardant containing Si, N, and S elements, ((2-(triethoxysilyl)ethyl)thio)ethan-1-amine hydrochloride (TETEA), was synthesized via a click reaction and characterized using nuclear magnetic resonance spectroscopy (NMR) and fourier transform infrared spectroscopy (FTIR). Subsequently, the flame-retardant cotton fabric was fabricated by sol-gel method. The results indicated that TETEA was successfully loaded on cotton fabric and formed a uniform protective layer on the surface of cotton fabric, exhibiting excellent flame retardancy. The flame-retardant cotton fabric achieved limiting oxygen index (LOI) of 28.3 % and passed vertical combustion test without after-flame or afterglow time at TETEA concentration of 500 g/L. Thermogravimetric analysis revealed that the residual carbon content of the flame-retardant cotton fabric was much higher than that of the control under air and N2 conditions. Besides, the flame-retardant cotton fabric was not ignited in cone calorimeter test with an external heat flux of 35 kW/m2. The peak heat release rate and the total heat release decreased from 133.4 kW/m2 to 25.8 kW/m2 and from 26.46 MJ/m2 to 17.96 MJ/m2, respectively. This phosphorus-free flame retardant offers a simplified synthesis process without adverse environmental impacts, opening up a new avenue for the development environmentally friendly flame retardants compared to traditional alternatives.

Chemical mapping of xyloglucan distribution and cellulose crystallinity in cotton textiles reveals novel enzymatic targets to improve clothing longevity.

Pilling is a form of textile mechanical damage, forming fibrous bobbles on the surface of garments, resulting in premature disposal of clothing by consumers. However, our understanding on how the structural properties of the cellulosic matrix compliment the three-dimensional shape of cotton pills remains limited. This knowledge gap has hindered the development of effective 'pillase' technologies over the past 20 years due to challenges in balancing depilling efficacy with fabric integrity preservation. Therefore, the main focus here was characterising the role of cellulose and the hemicellulose components in cotton textiles to elucidate subtle differences between the chemistry of pills and fibre regions involved in structural integrity. State-of-the-art bioimaging using carbohydrate binding modules, monoclonal antibodies, and Leica SP8 and a Nikon A1R confocal microscopes, revealed the biophysical structure of cotton pills for the first time. Identifying regions of increased crystalline cellulose in the base of anchor fibres and weaker amorphous cellulose at dislocations in their centres, enhancing our understanding of current enzyme specificity. Surprisingly, pills contained a 7-fold increase in the concentration of xyloglucan compared to the main textile. Therefore, xyloglucan offers a previously undescribed target for overcoming this benefit-to-risk paradigm, suggesting a role for xyloglucanase enzymes in future pillase systems.

A study of the effect of natural brown cotton gauze on the healing of infected wounds.

BACKGROUND: Medical dressings are designed to promote wound healing and reduce infection. The aim of project is to investigate the effect of natural brown colored cotton dressings on the healing of infected wounds in E.coli animals. MATERIALS AND METHODS: In this study, degreased white cotton gauze was used as the control group, with degreased brown cotton gauze and degreased bleached brown cotton gauze as the experimental group 1 and experimental group 2, to investigate the effect on the repair of post-infectious wound damage in animals by establishing an infected wound model in rats with E.coli as the infecting organism. RESULTS: The ability to promote healing of infected wounds was investigated by analyzing the wound healing status, macroscopic wound healing rate, hematoxylin-eosin staining, Masson staining, secretion of inflammatory factors by Elisa assay. The result showed that at day 14 of wound healing, the macroscopic wound healing rate was greater than 98% for all three groups of dressings; the collagen content reached 49.85 ± 5.84% in the experimental group 1 and 53.48 ± 5.32% in the experimental group 2, which was higher than the control group; brown cotton gauze promotes skin wound healing by shortening the inflammatory period in both groups. The expression of three inflammatory factors THF-α, IL-2, and IL-8 and three cytokines MMP-3, MMP-8, and MMP-9 were lower than that of the control group. CONCLUSIONS: It was found that natural brown cotton gauze has better repairing and promoting healing effect on infected wounds. It opens up the application of natural brown cotton gauze in the treatment of infected wounds.

Genomic insights into CKX genes: key players in cotton fibre development and abiotic stress responses.

Cytokinin oxidase/dehydrogenase (CKX), responsible for irreversible cytokinin degradation, also controls plant growth and development and response to abiotic stress. While the CKX gene has been studied in other plants extensively, its function in cotton is still unknown. Therefore, a genome-wide study to identify the CKX gene family in the four cotton species was conducted using transcriptomics, quantitative real-time PCR (qRT-PCR) and bioinformatics. As a result, in G. hirsutum and G. barbadense (the tetraploid cotton species), 87 and 96 CKX genes respectively and 62 genes each in G. arboreum and G. raimondii, were identified. Based on the evolutionary studies, the cotton CKX gene family has been divided into five distinct subfamilies. It was observed that CKX genes in cotton have conserved sequence logos and gene family expansion was due to segmental duplication or whole genome duplication (WGD). Collinearity and multiple synteny studies showed an expansion of gene families during evolution and purifying selection pressure has been exerted. G. hirsutum CKX genes displayed multiple exons/introns, uneven chromosomal distribution, conserved protein motifs, and cis-elements related to growth and stress in their promoter regions. Cis-elements related to resistance, physiological metabolism and hormonal regulation were identified within the promoter regions of the CKX genes. Expression analysis under different stress conditions (cold, heat, drought and salt) revealed different expression patterns in the different tissues. Through virus-induced gene silencing (VIGS), the GhCKX34A gene was found to improve cold resistance by modulating antioxidant-related activity. Since GhCKX29A is highly expressed during fibre development, we hypothesize that the increased expression of GhCKX29A in fibres has significant effects on fibre elongation. Consequently, these results contribute to our understanding of the involvement of GhCKXs in both fibre development and response to abiotic stress.

Amidoxime-grafted cotton fibers with anti-microbial sludge for efficient uranium recovery.

Uranium as a nuclear fuel, its source and aftertreatment has been a hot topic of debate for developers. In this paper, amidoxime and guanidino-modified cotton fibers (DC-AO-PHMG) were synthesized by the two-step functionalization approach, which exhibited remarkable antimicrobial and high uranium recovery property. Adsorption tests revealed that DC-AO-PHMG had excellent selectivity and anti-interference properties, the maximum adsorption capacity of 609.75 mg/g. More than 85 % adsorption capacity could still be kept after 10 adsorption-desorption cycles, and it conformed to the pseudo-second-order kinetic model and the Langmuir adsorption isotherm model as a spontaneous heat-absorbing chemical monolayer process. FT-IR, EDS and XPS analyses speculated that the amidoxime and amino synergistically increased the uranium uptake. The inhibitory activities of DC-AO-PHMG against three aquatic bacteria, BEY, BEL (from Yellow River water and lake bottom silt, respectively) and B. subtilis were significantly stronger, and the uranium adsorption was not impacted by the high bacteria content. Most importantly, DC-AO-PHMG removed up to 94 % of uranium in simulated seawater and extracted up to 4.65 mg/g of uranium from Salt Lake water, which demonstrated its great potential in the field of uranium resource recovery.

A fast and effective way to measure the inner pore size distributions of wetted cotton fibers and their pretreatment performance using time-domain nuclear magnetic resonance.

This study reports the findings from using time-domain nuclear magnetic resonance (TD-NMR) to analyze the pore structures of cotton fibers. Cotton fibers, which swell and soften in water, present challenges for conventional pore measurement techniques. TD-NMR overcomes these by measuring the transverse relaxation time (T2) of water protons within the fibers, indicative of internal pore sizes. We established a T2-to-pore size conversion equation using mixed cellulose ester membranes. This enabled differentiation between strongly bound, loosely bound, and free water within the fibers, and detailed the water distribution. A method for measuring the pore size distribution of wet cotton fiber was developed using TD-NMR. We then examined how various pretreatments affect the fibers' internal pores by comparing their pore size distribution and porosity. Specifically, caustic mercerization primarily enlarges the porosity and size of larger pores, while liquid ammonia treatment increases porosity but reduces the size of smaller pores. This research confirms TD-NMR's utility in assessing cotton fabrics' wet processing performance.

Ecofriendly dual-function cotton fabric with antibacterial and anti-adhesion properties based on modified natural materials.

Ecofriendly fabrics with antibacterial and anti-adhesion properties have been attracted an increasing attention in recent years. Herein, natural menthol modified polyacrylate (PMCA) antibacterial adhesion agent was synthesized by esterification and polymerisation while natural pterostilbene-grafted-chitosan (PGC) antibacterial agent was prepared through Mannich reaction. The antibacterial and anti-adhesion cotton fabric was fabricated through durable PMCA dip finishing and then layer-by-layer self-assembly of PGC. The results showed that the antibacterial adhesion rates and antibacterial rates of the dual-function cotton fabric against Staphylococcus aureus and Escherichia coli reached up to 99.9 %. Its antibacterial adhesion rates improved by 36.1 % and 40.1 % in comparison with those of cotton fabric treated by menthol alone. Meanwhile against S. aureus, the dual-function cotton fabrics improved the antibacterial rates by 56.7 % and 36.4 %, respectively, from those of chitosan- and pterostilbene-treated fabrics. Against E. coli, the improvements were 89.4 % and 24.8 %, respectively. After 20 household washings, the dual-function cotton fabric maintained >80 % of its original anti-adhesion and antibacterial rates against both species. The dual-function cotton fabric also possessed safe and excellent wearability.

Genome resources for three modern cotton lines guide future breeding efforts.

Cotton (Gossypium hirsutum L.) is the key renewable fibre crop worldwide, yet its yield and fibre quality show high variability due to genotype-specific traits and complex interactions among cultivars, management practices and environmental factors. Modern breeding practices may limit future yield gains due to a narrow founding gene pool. Precision breeding and biotechnological approaches offer potential solutions, contingent on accurate cultivar-specific data. Here we address this need by generating high-quality reference genomes for three modern cotton cultivars ('UGA230', 'UA48' and 'CSX8308') and updating the 'TM-1' cotton genetic standard reference. Despite hypothesized genetic uniformity, considerable sequence and structural variation was observed among the four genomes, which overlap with ancient and ongoing genomic introgressions from 'Pima' cotton, gene regulatory mechanisms and phenotypic trait divergence. Differentially expressed genes across fibre development correlate with fibre production, potentially contributing to the distinctive fibre quality traits observed in modern cotton cultivars. These genomes and comparative analyses provide a valuable foundation for future genetic endeavours to enhance global cotton yield and sustainability.

Genomic insights into local adaptation of upland cotton in China and Pakistan.

KEY MESSAGE: Different kinship and resistance to cotton leaf curl disease (CLCuD) and heat were found between upland cotton cultivars from China and Pakistan. 175 SNPs and 82 InDels loci related to yield, fiber quality, CLCuD, and heat resistance were identified. Elite alleles found in Pakistani accessions aided local adaptation to climatic condition of two countries. Adaptation of upland cotton (Gossypium hirsutum) beyond its center of origin is expected to be driven by tailoring of the genome and genes to enhance yield and quality in new ecological niches. Here, resequencing of 456 upland cotton accessions revealed two distinct kinships according to the associated country. Fiber quality and lint percentage were consistent across kinships, but resistance to cotton leaf curl disease (CLCuD) and heat was distinctly exhibited by accessions from Pakistan, illustrating highly local adaption. A total of 175 SNP and 82 InDel loci related to yield, fiber quality, CLCuD and heat resistance were identified; among them, only two overlapped between Pakistani and Chinese accessions underscoring the divergent domestication and improvement targets in each country. Loci associated with resistance alleles to leaf curl disease and high temperature were largely found in Pakistani accessions to counter these stresses prevalent in Pakistan. These results revealed that breeding activities led to the accumulation of unique alleles and helped upland cotton become adapted to the respective climatic conditions, which will contribute to elucidating the genetic mechanisms that underlie resilience traits and help develop climate-resilient cotton cultivars for use worldwide.

Bio-based phytic acid/amino acid complex coating for antimicrobial and flame-retardant cotton fabrics.

Here, a novel multifunctional coating containing bio-based phytic acid (PA), L-glutamic acid (L-Glu), and trimesoyl chloride (TMC) is constructed by a simple soaking strategy, giving cotton fabrics excellent flame retardancy, washability, and antibacterial properties. The coating layer on the cotton surface was prepared via the electrostatic and hydrogen bonding between PA and L-Glu, accompanied by the interface polymerization between PA, L-Glu, and TMC. Among them, the limiting oxygen index value of the treated cotton fabrics (C2 and C2-TMC) was as high as 40 %. During the vertical flammability test, both C2 and C2-TMC cotton showed self-extinguished behavior with a short damaged length (≤50 mm). Remarkably, the LOI of C2-TMC sustained a high value (30 %) even after 300 laundering cycles, maintaining its self-extinguishing behavior in the vertical combustion test. Additionally, in the cone calorimetry test, peak heat release rate and total heat release of treated cotton were lower than control cotton. Surprisingly, after 30 or 60 laundering cycles, the C2-TMC cotton exhibited excellent antibacterial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans due to the continuous exposure of PA and L-Glu. Moreover, the coating layer on the cotton surface had little impact on the mechanical properties and feel of the fabric.

A Life Cycle Assessment of Reusable and Disposable Surgical Caps.

INTRODUCTION: Surgical cap attire plays an important role in creating a safe and sterile environment in procedural suites, thus the choice of reusable versus disposable caps has become an issue of much debate. Given the lack of evidence for differences in surgical site infection (SSI) risk between the two, selecting the cap option with a lower carbon footprint may reduce the environmental impact of surgical procedures. However, many institutions continue to recommend the use of disposable bouffant caps. METHODS: ISO-14044 guidelines were used to complete a process-based life cycle assessment to compare the environmental impact of disposable bouffant caps and reusable cotton caps, specifically focusing on CO2 equivalent (CO2e) emissions, water use and health impacts. RESULTS: Reusable cotton caps reduced CO2e emissions by 79% when compared to disposable bouffant caps (10 kg versus 49 kg CO2e) under the base model scenario with a similar reduction seen in disability-adjusted life years. However, cotton caps were found to be more water intensive than bouffant caps (67.56 L versus 12.66 L) with the majority of water use secondary to production or manufacturing. CONCLUSIONS: Reusable cotton caps have lower total lifetime CO2e emissions compared to disposable bouffant caps across multiple use scenarios. Given the lack of evidence suggesting a superior choice for surgical site infection prevention, guidelines should recommend reusable cotton caps to reduce the environmental impact of surgical procedures.

Quantitative genomics-enabled selection for simultaneous improvement of lint yield and seed traits in cotton (Gossypium hirsutum L.).

KEY MESSAGE: A Bayesian linkage disequilibrium-based multiple-locus mixed model identified QTLs for fibre, seed and oil traits and predicted breeding worthiness of test lines, enabling their simultaneous improvement in cotton. Improving cotton seed and oil yields has become increasingly important while continuing to breed for higher lint yield. In this study, a novel Bayesian linkage disequilibrium-based multiple-locus mixed model was developed for QTL identification and genomic prediction (GP). A multi-parent population consisting of 256 recombinant inbred lines, derived from four elite cultivars with distinct combinations of traits, was used in the analysis of QTLs for lint percentage, seed index, lint index and seed oil content and their interrelations. All four traits were moderately heritable and correlated but with no large influence of genotype × environment interactions across multiple seasons. Seven to ten major QTLs were identified for each trait with many being adjacent or overlapping for different trait pairs. A fivefold cross-validation of the model indicated prediction accuracies of 0.46-0.62. GP results based on any two-season phenotypes were strongly correlated with phenotypic means of a pooled analysis of three-season experiments (r = 0.83-0.92). When used for selection of improvement in lint, seed and oil yields, GP captured 40-100% of individuals with comparable lint yields of those selected based on the three-season phenotypic results. Thus, this quantitative genomics-enabled approach can not only decipher the genomic variation underlying lint, seed and seed oil traits and their interrelations, but can provide predictions for their simultaneous improvement. We discuss future breeding strategies in cotton that will enhance the entire value of the crop, not just its fibre.

GhHDZ76, a cotton HD-Zip transcription factor, involved in regulating the initiation and early elongation of cotton fiber development in G. hirsutum.

In this study, the whole HD-Zip family members of G. hirsutum were identified, and GhHDZ76 was classified into the HD-Zip IV subgroup. GhHDZ76 was predominantly expressed in the 0-5 DPA of fiber development stage and localized in the nucleus. Overexpression of GhHDZ76 significantly increased the length and density of trichomes in Arabidopsis thaliana. The fiber length of GhHDZ76 knockout lines by CRISPR/Cas9 was significantly shorter than WT at the early elongation and mature stage, indicating that GhHDZ76 positively regulate the fiber elongation. Scanning electron microscopy showed that the number of ovule surface protrusion of 0 DPA of GhHDZ76 knockout lines was significantly lower than WT, suggesting that GhHDZ76 can also promote the initiation of fiber development. The transcript level of GhWRKY16, GhRDL1, GhEXPA1 and GhMYB25 genes related to fiber initiation and elongation in GhHDZ76 knockout lines were significantly decreased. Yeast two-hybrid and Luciferase complementation imaging (LCI) assays showed that GhHDZ76 can interact with GhWRKY16 directly. As a transcription factor, GhHDZ76 has transcriptional activation activity, which could bind to L1-box elements of the promoters of GhRDL1 and GhEXPA1. Double luciferase reporter assay showed that the GhWRKY16 could enhance the transcriptional activity of GhHDZ76 to pGhRDL1, but it did not promote the transcriptional activity of GhHDZ76 to pGhEXPA1. GhHDZ76 protein may also promote the transcriptional activity of GhWRKY16 to the downstream target gene GhMYB25. Our results provided a new gene resource for fiber development and a theoretical basis for the genetic improvement of cotton fiber quality.

Construction of efficient and environmentally friendly bio-based flame retardant cotton fabric through layer by layer self-assembly of alkylammonium functional silsesquioxane/phosphorylated sodium alginate.

As an important source of green cleaning flame retardants, bio-based materials have been widely studied by researchers. However, the development of efficient biobased flame retardants and convenient finishing methods was of great significance for the functional finishing of materials. Herein, a convenient and efficient flame retardant cotton fabric was prepared via layer by layer self-assembly (LbL) by alternating precipitation of a novel bio-based flame retardant phosphorylated sodium alginate (PSA) and alkylammonium functionalized siloxane (A-POSS). The effect of coating number on flame retardancy and thermal properties of coated cotton fabric was systematically studied. Thermogravimetric analysis (TGA) results showed that residual char contents of AP/PS-15BL under air and N2 atmospheres increased by 252.0% and 225.2%, respectively, compared with control cotton. In vertical flammability tests, both the AP/PS-10BL and AP/PS-15BL showed self-extinguishing behavior and successfully passed the UL-94 V-0 rating. More importantly, the LOI value of AP/PS-15BL was significantly increased to 35.0% from 20.0% of pure cotton fabric. Additionally, coated samples showed good mechanical properties and washable resistance. In CONE test, the peak heat release rate (PHRR) and total heat release rate (THR) of AP/PS-15BL decreased by 89.3% and 49.3% respectively, compared with control cotton. Therefore, this green and convenient flame-retardant finishing method has great application potential in the multi-functional finishing of cotton fabrics.

Eco-friendly multifunctional coating for polyester-cotton blended fabrics with superior flame retardancy and antibacterial properties.

Since the fire hazards of polyester-cotton blended (PTCO) fabrics and the hidden dangers of bacterial infection concerns caused by the contained cotton fiber, the design of flame retardant and antibacterial PTCO fabrics has received considerable attention. In this work, flame-retardant PTCO fabrics with satisfactory antibacterial properties were fabricated via a convenient and eco-friendly impregnation treatment involving guanidine phosphate (GP) and polyethylenimine (PEI). The prepared PTCO fabrics demonstrated excellent flame retardancy with a high limiting oxygen index value of 30.5 % and self-extinguishing capability, the damaged length was only 34 mm in the vertical flammability test. Furthermore, the peak heat release rate and the total heat release of coated PTCO fabrics were reduced significantly by 49 % and 38 %, respectively, indicating a substantial enhancement in fire safety. According to the analysis of the char residues and volatiles, GP presented great catalytic carbonization property, and PEI assisted the formation of the dense and stable carbon layer. The stable carbon layer effectively restricted mass and oxygen transfer between the PTCO fabrics and the environment. In addition, the introduction of PEI also produced more nonflammable gases to enhance the flame retardancy of the PTCO fabrics. Importantly, the GP/PEI coating barely deteriorate the physical and mechanical properties of the PTCO fabrics. The antibacterial rate of the GP/PEI-coated PTCO fabrics against Escherichia coli and Staphylococcus aureus was 99.99 %, similar to that of GP-coated fabrics, indicating the efficacy antibacterial properties of GP, and the addition of PEI did not compromise the antibacterial properties of GP. This work offers an efficient and simple approach to producing multifunctional PTCO fabrics with excellent flame retardancy and antibacterial properties, which are hopeful to expand the promising application of PTCO fabrics.

Flame retardant cotton fabrics with ultra-fast and long-term fire early warning response.

Smart textiles with flame retardant and fire-warning functions have received more and more attention. However, improving the fire-warning response sensitivity and long-term responsiveness of the smart textiles is a top priority. In this research, flame retardant and fire-warning cotton fabrics were prepared by layer-by-layer assembly composite coating consisting of bio-based flame retardants composed of chitosan (CS) and phytic acid (PA) and carbon-based nanomaterials composed of carbon nanotubes (CNTs) and graphene oxide (GO). The PA-GO/CS-CNTs coated cotton fabric showed excellent flame retardancy with a limiting oxygen index (LOI) value of 31 %, and the coated fabrics could self-extinguish rapidly when the flame was removed. The fire hazard of the coated fabric was significantly reduced by reducing the 45.77 % of peak heat release rate, 29.69 % of total heat release and 81.9 % of total smoke production. The PA-GO/CS-CNTs coated cotton fabric showed ultra-fast fire warning response with the response time of 1.0 s. And the fire-warning response time of the coated cotton fabric could last longer than 600 s revealing it possessed the continuous fire warning response property. This research provides a new strategy to prepare the smart fireproof textiles with flame retardant and fire-warning functions to broaden its application in early fire-warning.

Advances in regenerated cellulosic aerogel from waste cotton textile for emerging multidimensional applications.

Rapid development of society and the improvement of people's living standards have stimulated people's keen interest in fashion clothing. This trend has led to the acceleration of new product innovation and the shortening of the lifespan for cotton fabrics, which has resulting in the accumulation of waste cotton textiles. Although cotton fibers can be degraded naturally, direct disposal not only causes a serious resource waste, but also brings serious environmental problems. Hence, it is significant to explore a cleaner and greener waste textile treatment method in the context of green and sustainable development. To realize the high-value utilization of cellulose II aerogel derived from waste cotton products, great efforts have been made and considerable progress has been achieved in the past few decades. However, few reviews systematically summarize the research progress and future challenges of preparing high-value-added regenerated cellulose aerogels via dissolving cotton and other cellulose wastes. Therefore, this article reviews the regenerated cellulose aerogels obtained through solvent methods, summarizes their structure, preparation strategies and application, aimed to promote the development of the waste textile industry and contributed to the realization of carbon neutrality.

Consecutive high-performance removal of Cu2+ metal ions and Deltamethrin using multifunctional pyrolysis cuttlebone/cotton fabric nanocomposite.

A simple technique was developed for the modification of cotton materials that is inexpensive, environmentally friendly, and very effective. Waste Cotton fabrics (WCFs) are loaded with propolis extract (PE) for Cu2+ removal. Then, Cu2+ underwent a pyrolysis process with modified cuttlebone (CB) at 900 °C for 5 h. The surface of the prepared materials was characterized using X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), Fourier transform infrared (FTIR), BET, particle sizes, thermogravimetric analysis (TGA) and zeta potential analysis. The Cu2+ metal ions from an aqueous solution were removed using WCFs/PE, and DLM was subsequently removed using pyro WCFs/PE/Cu/CB. The as-prepared NPs exhibited the face-centered cubic structure of WCFs/PE/Cu/CB with crystallite sizes ranging from 386.70 to 653.10 nm. FTIR spectra revealed that CB was present on the surface of the resulting WCFs/PE/Cu. SEM revealed the dispersion of a uniformly flower-like morphology over a large area. Sorption studies were performed based on parameters that included pH, dose, contact time, and initial concentration. The adsorption isotherm and the kinetic studies of the DLM adsorption process were applied at a pH of 5.0 and a temperature of 25 °C using several isotherms and kinetic models. The results revealed qmax (20.51 mg/g) with R2 = 0.97, the Langmuir isotherm that best matches the experimental data. Hence, the Langmuir isotherm suggests that it is the model that best describes sorption on homogenous surfaces or surface-supporting sites with various affinities. The correlation coefficient R2, χ2, adjusted correlation coefficient, and error functions like root mean square (RMSE), normalized root mean square error (NRMES), and mean absolute error (MAE) were used to evaluate the best-fit models to the experimental adsorption data. Moreover, cost estimation for the prepared adsorbent WCFs/PE/Cu showed that it costs approximately 3 USD/g, which is a cheap adsorbent compared to other similar adsorbents reported in the literature. The examined WCFs/PE have significant applicability potential for Cu2+-laden wastewater treatment due to their superior Cu2+ metal ions adsorption capability and reusability. The cytotoxicity and safety study showed that at higher concentrations, it resulted in much less cell viability. Additionally, the removal efficiency of Cu2+ metal ions from synthetic, realistic industrial wastewater using WCFs/PE reached up to 96.29 %, demonstrating good adsorption capability. Thus, there is a huge possibility of accomplishing this and performing well. This study paves the way for the reuse and valorization of selected adsorbents following circular economy principles. Two green metrics were applied, the Analytical Eco-scale and the Analytical GREEnness Calculator (AGREE).