Comparing Multipin Clamps With Outriggers With Standard Clamps for Lower Extremity Periarticular External Fixation: Similar Radiographic and Clinical Outcomes.

INTRODUCTION: Staged treatment of high-energy periarticular tibia fractures involves temporization with closed reduction and external fixation, aiming to provide early reduction and stabilization while mitigating soft-tissue complications. Various external fixator configurations exist, including those that use a "multipin" clamp capable of holding multiple pins but limiting pin placement to a single plane. The purpose of this study was to compare clinical and radiographic outcomes and associated costs of standard and multipin outrigger clamp constructs in tibial plateau and pilon fractures treated with temporary external fixation. We hypothesized that use of the multipin clamp may be associated with poorly aligned reductions and increased complication rates. METHODS: A retrospective review of 100 patients with periarticular tibial plateau (AO/OTA: 41B/C) or pilon (43B/C) fracture at a Level 1 trauma center from 2014 to 2023 was conducted. Patient, injury, and complication characteristics were collected. Patients were categorized based on the external fixator clamp used: multipin (MP) or standard (S). Clinical outcomes and complication rates were assessed. Radiographic alignment was evaluated by the change in anterior and lateral distal tibial angles, and sagittal plane translation for pilon fractures, and medial and posterior proximal tibial angles for plateau fractures. RESULTS: 70 patients underwent standard (25 pilon, 45 plateau) and 30 multipin (10 pilon, 20 plateau) external fixation. MP and S groups showed no notable differences in demographics or injury characteristics. Both groups demonstrated comparable complication rates and radiological alignment outcomes, with no notable differences observed. MP constructs were more costly than standard systems. CONCLUSION: In this retrospective study of 100 patients, there was no difference in radiographic or clinical outcomes between the standard frame and multipin frame groups. Typical costs for the multipin frame constructs were $635 to $1249 more than the standard frame constructs.

Nonunion of the distal one-fourth of the tibia treated by retrograde tibial intramedullary nail.

OBJECTIVE: To evaluate the effectiveness of retrograde tibial intramedullary nail (RTN) in addressing nonunion in the distal one-fourth of the tibia. METHODS: This retrospective study included consecutive patients who were treated with RTN for nonunion in the distal one-fourth of the tibia between December 2020 and August 2023. Data regarding age, sex, injury mechanism, fracture type, initial fixation method, nonunion duration and type, risk factors, surgical duration, hospital stay, time to bone union, ankle function at final follow-up, and any complications were extracted from hospital records and analysed. RESULTS: Five patients in total were included, with previous treatments comprising locking plates and/or external fixation. The mean duration of RTN surgery was 94.0 ± 13.7 min, and mean duration of hospital stay was 9.8 ± 1.9 days. Patients were monitored for 10-18 months post RTN, achieving complete bone healing within a mean of 4.8 months. At the latest follow-up, the mean American Orthopedic Foot and Ankle Society (AOFAS) score was 84.4 ± 6.8 (range, 77-95). No complications, such as infection, reoperation, implant issues, rotational deformity, or shortening were reported. CONCLUSION: RTN emerges as a dependable, minimally invasive, and safe treatment modality for managing nonunion in the distal one-fourth of the tibia.

Comparative clinical efficacy of "Figure-8" Banding and double-row anchor suture-bridge fixation in arthroscopic management of tibial intercondylar eminence avulsion fractures.

OBJECTIVE: The objective of this study is to assess and compare the clinical efficacy of "Figure-8" banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures. METHOD: A retrospective analysis was conducted on the medical records of 42 patients who underwent arthroscopic surgery for tibial intercondylar eminence fractures at our institution from June 2017 to June 2022. This cohort included 20 cases treated with "Figure-8" banding and 22 cases managed using double-row anchor suture-bridge fixation. Comparative assessments were made regarding operative duration, duration of fracture consolidation, postoperative knee joint range of motion, joint stability as assessed by the Lachman test, Lysholm score, and International Knee Documentation Committee (IKDC) functional score for both treatment groups. RESULTS: The mean follow-up duration was 13.8 months. The analysis indicated that the double-row anchor suture-bridge group had a significantly longer operative duration compared to the "Figure-8" banding group (p < 0.05). Postoperative computed tomography (CT) scans confirmed successful reduction in both groups, with fracture consolidation achieved within an average of three months. Both groups showed significant improvements in postoperative knee range of motion, joint stability, and functional scores compared to preoperative measurements (p < 0.05). During the initial two-month post-surgery, the double-row anchor suture-bridge group demonstrated superior knee joint range of motion and functional scores compared to the "Figure-8" banding group (p < 0.05); however, these differences were not statistically significant beyond three months post-surgery (p > 0.05). By the one-year postoperative mark, joint stability outcomes were comparable between the two treatment groups (p > 0.05). CONCLUSION: Both "Figure-8" banding and double-row anchor suture-bridge fixation techniques in the arthroscopic management of tibial intercondylar eminence avulsion fractures can achieve precise reduction and stable fixation. In addition, the figure-8 suture group has the characteristics of shorter surgery time and less cost. Notably, early postoperative knee function appears to be superior with double-row anchor suture-bridge fixation compared to "Figure-8" banding.

An unusual Ogden type V tibial tubercle avulsion fracture: a case report and literature review.

BACKGROUND: Ogden type V tibial tubercle avulsion fracture is an unusual type of physial injury. Thus, little is known about its mechanism of injury and treatment. The type of osteosynthesis is variable and depends on the experience of the surgeon. We commonly used cancellous screws fixation combined with tension band wiring for displaced fracture of the anterior tibial tuberosity. CASE PRESENTATION: The present manuscript describes a case of a Han nationality 13-year-old boy who presented with severe pain of the left knee, which began after landing following a high jump. He had no significant past medical history apart from a high body mass index of 30.3. Radiographs revealed that he had an unusual Ogden type V tibial tubercle avulsion fracture. He was treated by open reduction and combined fixation with cannulated screws and tension-band wiring. After 3 months, the fracture healed without any complications or knee symptoms with full range of motion. He underwent reoperation for symptomatic hardware, which was removed at 5 months after initial surgery, and returned to his prior level of sporting activity at 1 year follow-up. CONCLUSION: Our case suggests that excellent functional outcome could be achievable by open reduction with the combination of internal fixation and tension-band wiring for Ogden type V tibial tubercle avulsion fracture. This type of osteosynthesis could not only achieve anatomical reduction and stable fixation for such fractures, but also avoid further damage to the proximal tibial epiphysis, which prevents serious complications, such difference in leg length.

Disintegration of Multiple Parts of a Bone Transport Nail During Planned Removal: A Case Report.

CASE: A 34-year-old man with a distal tibia bone defect was treated with an intramedullary bone transport nail (Precice Bone Transport System, NuVasive). During planned removal after successful treatment, 7 separate subcomponents of the nail became disconnected and had to be separately removed using specialized instrumentation. This occurred despite adherence to the manufacturer's recommended technique for nail removal and in the absence of clinical or radiographic evidence of implant failure. CONCLUSION: When planning for implant removal, surgeons should be aware of potential intraoperative disconnection of subcomponents of this magnetic bone transport nail and ensure that equipment for retrieval (e.g., very long endoscopy forceps) is available.

[Lateral open wedge tibial osteotomy for posttraumatic deformity]. / Tibiale laterale Open-wedge-Osteotomie bei posttraumatischer Deformität.

OBJECTIVE: Correction of pseudoinstability and tibial malalignment by re-establishment of the pretraumatic tibial axis. INDICATIONS: Posttraumatic valgus malalignment accompanied by pseudoinstability. CONTRAINDICATIONS: Infections, significant inhibition of movement and multidirectional ligament instability. SURGICAL TECHNIQUE: Standard anterolateral approach to the proximal tibial head. Lateral open wedge high tibial osteotomy above (supra) the tibiofibular joint and opening until the pseudoinstability of the lateral collateral ligament is levelled. POSTOPERATIVE MANAGEMENT: Partial weight bearing for 4 weeks, after radiological control full body weight loading is allowed. Implant removal after full bony consolidation. RESULTS: There is limited evidence in the current literature but the available results show good results in 70% of the cases in long-term follow-up.

Closed reduction by robot with different modes: Experimental study on tibial fracture specimen.

PURPOSE: This paper evaluates the accuracy and safety of a long bone fracture reduction robot under different surgical modes. METHODS: A long bone fracture reduction robot system was developed, which can be controlled via an autonomous surgical mode or a master-slave surgical mode. Reduction experiments were conducted on a long bone cadaver specimen. The accuracy and safety of the robotic reduction were compared across the different surgical modes. RESULTS: When the fracture reduction was completed by the robot, the translational deviation was less than 2 mm, and the angular deviation was less than 3° The autonomous reduction time was 140 s, while the master-slave reduction time was 200 s. CONCLUSIONS: Based on CT imaging verification, the accuracy of the robot in both autonomous and master-slave surgical modes meets clinical requirements. Future work will focus on further optimizing the robot system.

Management of rotational malalignment following operative treatment of fractures of the lower extremities. A scoping review.

BACKGROUND: Rotational malalignment after operative fracture treatment of the lower extremity may be associated with increased pain and functional impairment. Despite its clinical relevance, there are no uniform management guidelines. The aim of this scoping review is to provide an overview of all available evidence to diagnose and treat rotational deformities of the lower extremity following operative fracture treatment. METHODS: This scoping review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. A literature search was carried out on 22 August 2023 by two independent reviewers in the Pubmed (MEDLINE), Embase, Web of Science, and Cochrane library databases. The search strategy was developed with the assistance of a biomedical information specialist. The main search terms were tibial and femoral malrotations. Disagreements were resolved through discussion with a third reviewer. RESULTS: After screening and quality assessment of 3929 unique identified records, 50 articles were included for qualitative synthesis. Most studies were retrospective case reports or case series. Thirty studies focused on the femur, 11 on the tibia and nine included both femur and tibia. Most of the included studies presented cases where malrotation was associated with other limb deformities. Only 18 studies focused solely on the treatment of malrotation of the lower extremities after operative fracture treatment. Regarding diagnosis, bilateral CT-scans were used in 34 studies. Regarding treatment, external fixation was used in two studies, internal fixation (either intramedullary nail or plate) in 45 studies, and in three studies the authors used both. Overall, revision surgery resulted in good clinical outcomes with low complication rates. CONCLUSION: This scoping review reveals that rotational malalignment following operative treatment of lower extremity fractures remains an important complication. Although it occurs frequently and is associated with severe disability for the patient, standardized guidelines regarding the terminology, diagnosis, indications for intervention and treatment are lacking. CT-scan is the most used diagnostic modality in daily clinical practice. Revision surgery, using diverse operative techniques, demonstrated positive results, significantly alleviating patient complaints with few complications. Nevertheless, an international consensus regarding the optimal management pathway is needed, and future prospective clinical studies seem therefore necessary.

Study on the efficacy of 3D printing technology combined with customized plates for the treatment of complex tibial plateau fractures.

BACKGROUND: Anatomical reduction and stable fixation of complex tibial plateau fractures remain challenging in clinical practice. This study examines the efficacy of using 3D printing technology combined with customized plates for treating these fractures. METHODS: We retrospectively analyzed 22 patients treated with 3D printing and customized plates at the Orthopedic Department of the Central Hospital affiliated with Shenyang Medical College from September 2020 to January 2023. These patients were matched with 22 patients treated with traditional plates with similar baseline characteristics. Patients were divided into an experimental group (3D-printed models and customized plates) and a control group (traditional plates). The control group underwent traditional surgical methods, while the experimental group had a preoperative 3D model and customized plates for surgical planning. We compared baseline characteristics and recorded various indicators, including preoperative preparation time, surgical time, intraoperative blood loss, number of intraoperative fluoroscopies, hospital stay duration, fracture healing time, complications, knee joint range of motion (ROM), Rasmussen anatomical and functional scores, and HSS scores. RESULTS: All surgeries were successful with effective follow-up. The experimental group had shorter surgical time, less intraoperative blood loss, and fewer intraoperative fluoroscopies (P < 0.05). At 6 months and 1 year postoperatively, the experimental group had better knee joint HSS scores than the control group. Preoperative preparation time and total hospital stay were shorter in the control group (P < 0.05). There were no significant differences in fracture healing time and follow-up duration between groups. The experimental group showed better knee joint flexion angles (P < 0.05). Rasmussen scores showed no statistical difference between groups (P > 0.05). The incidence of complications was slightly lower in the experimental group but not significantly different. CONCLUSION: 3D printing technology combined with customized plates for complex tibial plateau fractures enables precise articular surface reduction, significantly shortens surgical time, and reduces intraoperative blood loss. This method improves knee joint function, offering a more effective treatment option.

Atypical fractures of the lower extremities in two patients with rheumatoid arthritis: clinical presentations of presumed methotrexate osteopathy.

We present two patients who developed multiple lower limb stress fractures. Potential causes, such as osteoporosis, malignancies and disturbances in calcium metabolism were investigated. This led the physicians to consider whether methotrexate (MTX) exposure posed a risk of atypical fractures.The association between MTX and lower limb fractures has been described in at least 80 cases in the literature. Stress fractures associated with MTX treatment are atypical of osteoporosis and located in the lower extremities, most often the tibia. The limited data suggest that discontinuation of MTX may improve symptoms and chances of fracture healing, while antiresorptive or osteoanabolic therapies have not proven clinically efficient. It seems evident, however, that the benefits of MTX treatment in rheumatological disease clearly outweigh the risk of MTX osteopathy and related fractures.

Tibiofemoral axial rotation in tibial plateau fractures: A retrospective radiographic assessment of 203 tibial plateau fractures.

BACKGROUND: Defining the injury-force mechanism in tibial plateau fractures (TPFs) could help define implant type and position, as well as soft tissues at risk. The aim of this study was to provide an analysis of injury-force-mechanisms in TPFs, including axial rotation. METHODS: The injury-force mechanism was determined for 203 fractures that presented over a period of 3.5 years. Fractures were classified as flexion-varus/valgus/neutral or (hyper)-extension-varus/valgus/neutral by observing articular depression area on CT/MRI. Fractures were subclassified into rotation-neutral, internal- or external-rotation according to the Gerdy-tibial-tuberosity-surgical-epicondylar-axis (GTT-SEA) angle. Soft-tissue injury was documented if MRI was performed. RESULTS: Flexion-valgus was the most common injury-force mechanism (n = 85, 41.9%), followed by extension-valgus (n = 57, 28.1%). Other mechanisms were less common (9.4% extension-varus, 5.9% flexion-neutral, 4.9% flexion-varus, 3.9% hyperextension-valgus, 3.4% extension-neutral and 2.5% hyperextension-varus). The GTT-SEA angle could be measured in 194 (95.6%) of 203 classified patients, revealing internal rotation in 83 (42.8%) and external rotation in 53 (27.3%). No significant difference was found between injury-force mechanism type and axial rotation group (P = 0.964) or extent of rotation (H(8) = 7.116, P = 0.524). Only 41 (21.1%) of 194 fully classified fractures underwent MRI, all revealing soft-tissue injury to some extent. High-grade posterolateral injuries occurred mainly in rotated TPF. CONCLUSION: Our results describe the common forms of axial rotation present in TPF and explore their association with injury-force mechanism and soft-tissue injury. Applying the injury-force mechanism patterns and addressing rotational forces could, together with preoperative MRI and intra-operative stability assessment, help determine the need to surgically address associated soft-tissue injury.

Retrograde tibial intramedullary nail versus minimally invasive locking plate for extra-articular distal tibial fractures: a comparative and retrospective study.

BACKGROUND: Distal tibial fractures represent common lower limb injuries, frequently accompanied by significant soft tissue damage. The optimal surgical approach for managing these fractures remains a topic of considerable debate. The aim of this study was to perform a comparative analysis of the outcomes associated with retrograde intramedullary tibial nails (RTN) and minimally invasive plate osteosynthesis (MIPO) in the context of treating extra-articular distal tibial fractures. METHODS: A retrospective review was conducted on a cohort of 48 patients who sustained extra-articular distal tibial fractures between December 2019 and December 2021. Patients underwent either RTN or MIPO procedures. Various parameters, including operative duration, intraoperative fluoroscopy exposure, time to union, duration until full weight-bearing, American Orthopedic Foot and Ankle Society (AOFAS) scores, and complications, were recorded and compared between the two treatment groups. RESULTS: No statistically significant differences were observed in operative duration, time to union, angulation of the distal tibial coronal plane, or AOFAS scores between the RTN and MIPO groups. However, the RTN group had a higher average number of intraoperative fluoroscopy images (8.2 ± 2.3) compared to the MIPO group (4.1 ± 2.0). The RTN group demonstrated shorter average hospital stays (7.1 ± 1.4 days) and a quicker return to full weight-bearing (9.9 ± 1.3 weeks), which were significantly superior to the MIPO group (9.0 ± 2.0 days and 11.5 ± 1.5 weeks, respectively). In terms of complications, the RTN group had one case of superficial infection, whereas the MIPO group exhibited two cases of delayed union and nonunion, two occurrences of deep infection, and an additional three cases of superficial infection. CONCLUSIONS: Both RTN and MIPO are effective treatment options for extra-articular distal tibial fractures. However, RTN may offer superior outcomes in terms of decreased inpatient needs, faster return to full weight-bearing capacity, and a lower rate of complications.

CT of Periarticular Adult Knee Fractures: Classification and Management Implications.

Periarticular knee fractures, which include fractures of the distal femur, tibial plateau, and patella, account for 5%-10% of musculoskeletal injuries encountered in trauma centers and emergency rooms. These injuries are frequently complex, with articular surface involvement. Surgical principles center on reconstruction of the articular surface as well as restoration of limb length, alignment, and rotation to reestablish functional knee biomechanics. Fixation principles are guided by fracture morphology, and thus, CT with multiplanar reformats and volume rendering is routinely used to help plan surgical intervention. Fractures involving the distal femur, tibial plateau, and patella have distinct management considerations. This comprehensive CT primer of periarticular knee fractures promotes succinct and clinically relevant reporting as well as optimized communication with orthopedic trauma surgeon colleagues by tying fracture type and key CT findings with surgical decision making. Fracture patterns are presented within commonly employed fracture classification systems, rooted in specific biomechanical principles. Fracture typing of distal femur fractures and patellar fractures is performed using Arbeitsgemeinschaft für Osteosynthesefragen/Orthopedic Trauma Association (AO/OTA) classification schemes. Tibial plateau fractures are graded using the Schatzker system, informed by a newer explicitly CT-based three-column concept. For each anatomic region, the fracture pattern helps determine the surgical access required, whether bone grafting is warranted, and the choice of hardware that achieves suitable functional outcomes while minimizing the risk of articular collapse and accelerated osteoarthritis. Emphasis is also placed on recognizing bony avulsive patterns that suggest ligament injury to help guide stress testing in the early acute period. ©RSNA, 2024 Supplemental material is available for this article.

Virtual surgical planning and use of a 3D-printed, patient-specific reduction system for minimally invasive plate osteosynthesis of diaphyseal tibial fractures in dogs: A historic case control study.

OBJECTIVE: To compare the efficacy and clinical outcomes of computed tomography (CT)-based virtual surgical planning (VSP) and a three-dimensional (3D)-printed, patient-specific reduction system to conventional indirect reduction techniques for diaphyseal tibial fractures stabilized using minimally invasive plate osteosynthesis (MIPO) in dogs. STUDY DESIGN: A prospective clinical study with a historic control cohort. SAMPLE POPULATION: Dogs undergoing MIPO stabilization of diaphyseal tibial fractures using a custom 3D-printed reduction system (3D-MIPO; n = 15) or conventional indirect reduction techniques (c-MIPO; n = 14). METHODS: Dogs were prospectively enrolled to the 3D-MIPO group and CT scans were used to design and fabricate a custom 3D-printed reduction system to facilitate MIPO. Medical records were searched to identify dogs for the c-MIPO group. Pre-, intra- and postoperative parameters were compared between groups. RESULTS: The duration from presentation until surgery was 23 h longer in the 3D-MIPO group (p = .002). Fewer intraoperative fluoroscopic images were acquired (p < .001) and mean surgical duration was 34 min shorter in the 3D-MIPO group (p = .014). Median postoperative tibial length, frontal alignment, and sagittal alignment were within 4 mm, 3° and 3°, respectively, of the contralateral tibia in both groups and did not differ between reduction groups (p > .1). Postoperative complications occurred in 27% and 14% of fractures in the 3D-MIPO and c-MIPO groups, respectively. CONCLUSION: Both reduction methods yielded comparable results. Although the preoperative planning and guide preparation was time consuming, surgery times were shorter and fluoroscopy use was less in the 3D-MIPO group. CLINICAL SIGNIFICANCE: VSP and the custom 3D-printed reduction system facilitated efficient MIPO.

Utility of CT Scans for Detecting Operative Malleolar Fractures Associated With Tibial Shaft Fractures.

OBJECTIVES: The purpose of this study was to define the utility of CT scans for detecting articular extension in tibial shaft fractures and determine whether radiographic parameters can predict the presence of operative distal tibial articular fractures (DTAFs). DESIGN: Retrospective cohort study. SETTING: Single level I trauma center. PATIENT SELECTION CRITERIA: Patients age 18 years and older who were treated operatively for tibial shaft fractures occurring at or below the tibial isthmus were included. Patients were excluded for extension of the main tibial shaft fracture into the tibial plafond (AO/OTA 43 B/C), ballistic injuries, and absence of a preoperative CT scan. OUTCOME MEASURES AND COMPARISONS: The primary outcome was CT utility, defined as the presence of a DTAF or DTAF displacement on CT that was not recognized on plain radiographs on secondary analysis at the time of the study by a senior-level resident. Secondary outcome was the association between radiographic parameters and operative DTAFs. Variables with P ≤ 0.2 on univariate testing were included in a multiple binary logistic regression model to determine independent predictors of operative DTAFs. RESULTS: One hundred forty-four patients were included, with a mean age of 52 years. Seventy-six patients (53%) were men. CT utility was 41% for the identification of unrecognized DTAFs. CT utility was 79% for isolated pDTAF, 57% for medial DTAF, 83% for isolated anterolateral DTAF, and 100% for multiple DTAFs. Operative DTAFs were independently associated with spiral tibial shaft fracture type (P < 0.001) and low fibular fracture (P = 0.04). In patients who had both spiral tibial shaft fracture type and low fibula fracture, the rate of operative DTAF was 46% (22/48). CONCLUSIONS: CT scans identified DTAFs that were unrecognized on plain radiographs in 41% of cases. CT scans were most useful in identifying nonposterior DTAFs. CT scans may be considered for all distal third tibial fractures, but especially those with spiral tibial shaft patterns and low fibular fractures, to avoid missing operative articular injury. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Improving the radiographic image analysis of the classic metaphyseal lesion via conditional diffusion models.

The classic metaphyseal lesion (CML) is a unique fracture highly specific for infant abuse. This fracture is often subtle in radiographic appearance and commonly occurs in the distal tibia. The development of an automated model that can accurately identify distal tibial radiographs with CMLs is important to assist radiologists in detecting these fractures. However, building such a model typically requires a large and diverse training dataset. To address this problem, we propose a novel diffusion model for data augmentation called masked conditional diffusion model (MaC-DM). In contrast to previous generative models, our approach produces a wide range of realistic-appearing synthetic images of distal tibial radiographs along with their associated segmentation masks. MaC-DM achieves this by incorporating weighted segmentation masks of the distal tibias and CML fracture sites as image conditions for guidance. The augmented images produced by MaC-DM significantly enhance the performance of various commonly used classification models, accurately distinguishing normal distal tibial radiographs from those with CMLs. Additionally, it substantially improves the performance of different segmentation models, accurately labeling areas of the CMLs on distal tibial radiographs. Furthermore, MaC-DM can control the size of the CML fracture in the augmented images.

Extra-articular proximal tibia fracture fixation with locked plating versus intramedullary nailing: A meta-analysis.

OBJECTIVES: This study compared outcomes of locked plating (LP) versus intramedullary nailing (IMN) techniques for treatment of extra-articular proximal-third tibia fractures. METHODS: Data Sources: PubMed, Ovid MEDLINE STUDY SELECTION: Studies were included if they compared LP and IMN fixation for proximal one third tibial shaft fractures without articular extension or with simple articular extension into the tibial plateau. Minimum 1 year of clinical and radiographic follow up was used. DATA EXTRACTION: Outcomes assessed included operative duration, postoperative knee range of motion (ROM), union outcomes (time to union, nonunion, malunion, delayed union), and incidence of postoperative complications (superficial and deep infection, secondary surgical intervention, compartment syndrome). DATA SYNTHESIS: Separate random-effects meta-analyses were conducted for each outcome. For categorical data, relative risks were used whereas the standardized mean difference was used for continuous variables, with corresponding 95 % confidence intervals. RESULTS: 7 studies were included reporting the outcomes of 319 patients treated with LP and 300 treated with IMN. IMN fixation had significantly shorter time to union (p = 0.049) and lower risk for superficial infection (p = 0.028). However, LP conferred a significantly lower risk for malunion (p = 0.017) and postoperative compartment syndrome (p = 0.018). CONCLUSION: IMN demonstrated significantly shorter time to union and lower risk of superficial infection when treating extra-articular proximal tibia fractures, while LP fixation demonstrated significantly lower risk for malunion and postoperative compartment syndrome. Although successful results can be achieved with good technique in LP and IMN fixation, a significant complication profile exists with these fractures regardless of construct choice. LEVEL OF EVIDENCE: Therapeutic Level III.

Classification and management of tibial tubercle avulsion fractures in children.

Fractures of the tibial tubercle are an uncommon injury, constituting 0.4-2.7% of all epiphyseal injuries. They occur in the adolescent age group, often during sports such as basketball and football. They are often classified using the modified Ogden classification. Understanding the anatomy and pathophysiology is essential in the management of these fractures, to predict complications and counsel patients and families on care. Tibial tubercle fractures generally have favourable overall outcomes when the correct treatment modality is chosen, with a high rate of union and a 98% return to preinjury activities. This article provides a guide for doctors on the classification and management of these injuries, to ensure that appropriate treatment is given according to current literature and best practice.

A Novel Method to Assess Healing of Segmental Bone Defects using the Induced Membrane Technique.

OBJECTIVE: Clinical concerns exist regarding the quality of bony consolidation in the context of the induced membrane technique. This study evaluates the clinical process of bone grafting in the second stage of induced membrane bone union in patients with tibial bone defects to infer the possibility of non-union and establish a reliable and effective evaluation method combined with computed tomography (CT) to assess fracture healing. METHODS: Patients with tibial bone defects who underwent the induced membrane technique at our hospital between February 2017 and February 2020 were retrospectively analyzed. The Hounsfield unit (HU) values of the patients were evaluated at different times during the second stage of bone grafting. Bone healing at the boundary value of the 120 HU output threshold (-1024 HU-3071 HU) was directionally selected, and the changes in the growth volume of union (new bone volume [selected according to HU value]/bone defect volume) were compared with analyzing individual class bone union. Method 1 involved X-rays revealing that at least three of the four cortices were continuous and at least 2 mm thick, with the patient being pain free. For Method 2, new bone volume (selected according to HU value/bone defect volume) at the stage was compared with analyzing individual class healing. Receiver operating characteristic curve analysis was used for Methods 1 and 2. RESULTS: A total of 42 patients with a segmental bone defect with a mean age of 40.5 years (40.5 ± 8.3 years) were included. The relationship between bone graft volume and time variation was analyzed by single factor repeated variable analysis (F = 6.477, p = 0.016). Further, curve regression analysis showed that the change in bone graft volume over time presented a logarithmic curve pattern (Y = 0.563 + 0.086 × ln(X), Ra2 = 0.608, p = 0.041). ROC curve analysis showed that Method 2 is superior to Method 1 (AUC: 86.3% vs. 68.3%, p < 0.05). CONCLUSION: The induced membrane technique could be used to treat traumatic long bone defects, with fewer complications and a higher healing rate. The proposed imaging grading of HU (new bone volume/bone defect volume) can be used as a reference for the quality of bony consolidation with the induced membrane technique.

Isolated Lateral Plating for Bicondylar Tibial Plateau Fractures: Factors Influencing Decision Making.

Lateral plating alone has been postulated as an alternative for fixation of bicondylar tibial plateau fractures in attempts to limit morbidity associated with dual plating. Characterization of fracture patterns that may facilitate lateral plating alone for bicondylar tibial plateau fractures is not well established. The authors analyzed radiographic and clinical outcomes of isolated lateral plating in patients with at least 6 months of follow-up. Of 56 patients identified, 37 (66%) had 41 AO Foundation (AO)/Orthopaedic Trauma Association (OTA) C1/C2 fractures with 19 (34%) presenting with 41 C3 fractures. Mean posteromedial articular fracture angle (PMAFA) was 69.9 degrees, with an average of 1.3 medial articular fragments. Only 16 patients (28%) had a PMAFA under 45 degrees. There were no cases of nonunion, and five patients (8.9%) developed wound infection during follow-up. Four patients (7.1%) experienced malreduction over three degrees, and eight patients (14.3%) experienced change in alignment over the follow-up duration, indicating some risk of inadequate fixation with this technique. (Journal of Surgical Orthopaedic Advances 33(2):088-092, 2024).