Metal artifact reduction tool and mA levels impact on the diagnosis of fracture extension in endodontically treated teeth using cone-beam CT.

AIM: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT). MATERIALS AND METHODS: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05). RESULTS: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA. CONCLUSIONS: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT. CLINICAL RELEVANCE: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension.

In vitro evaluation of the accuracy of electronic apex locators and cone-beam CT in the detection of oblique root fractures.

OBJECTIVES: This study aimed to compare the accuracy of cone-beam CT (CBCT) scanning and 3 different electronic apex locators (EALs) in the detection of simulated oblique root fractures (ORF) in different localizations. METHODS: The study utilised a total of 80 human maxillary incisors, which were categorised into two groups based on the location of the ORF (apical and middle third of the root) formed on the buccal side of the root surface. The measurement of the distance between the incisal edge and the intersection of the ORF with the root canal was conducted using a stereomicroscope. This measurement is referred to as the actual working length (AWL). Additionally, three EALs-Dentaport ZX, EndoRadar Pro, and Propex II-were utilised to determine the electronic working length (EWL). Furthermore, CBCT images were employed to assess the distance, known as the CBCT working length (CWL). The differences were determined by subtracting AWL from EWL and CWL. RESULTS: Based on the accuracy of the devices, there were no significant differences observed among Dentaport ZX, EndoRadar, Propex II, and CBCT measures in both the apical and middle third ORF groups, within the acceptable range of 0.5 and 1 mm. CONCLUSIONS: The accuracy of Dentaport ZX, Propex II, and CBCT was higher in the middle third ORF group compared to the apical third ORF group, with a tolerance of 0.5 mm. However, there were no significant differences seen among the devices.

Developing evidence-based clinical imaging guidelines for the diagnosis of vertically fractured teeth.

OBJECTIVES: This study aimed to develop an evidence-based clinical imaging guideline for teeth suspected with vertical root fractures. METHODS: An adaptation methodology based on the Korean Clinical Imaging Guidelines (K-CIG) was used in the guideline development process. After searching for guidelines using major databases such as Ovid-Medline, Elsevier-Embase, National Guideline Clearinghouse, and Guideline International Network, as well as domestic databases such as KoreaMed, KMbase, and KoMGI, two reviewers analyzed the retrieved articles. The retrieved articles were included in this review using well-established inclusion criteria. RESULTS: Twenty articles were identified through an online search, of which three were selected for guideline development. Based on these three guidelines, this study developed specific recommendations concerning the optimal imaging modality for diagnosing teeth suspected of vertical root fractures. CONCLUSIONS: Periapical radiography is the preferred method for assessing teeth with mastication-related pain and suspected vertical root fractures. However, if intraoral radiographs do not provide sufficient information about root fractures, a small FOV CBCT may be considered. However, the use of CBCT in endodontically treated teeth is significantly constrained by the presence of artificial shading.

Incidental CBCT Findings: The Importance of Reading the Whole Image.

The use of cone-beam computed tomography (CBCT) imaging often elicits changes in both diagnostics and treatment plans when incorporated into endodontic workups. In endodontic practice, CBCT scans enable detection of periapical pathology before it is apparent on traditional 2-dimensional intraoral radiographs. The visualization provided by CBCT scans can help clinicians confirm suspected diagnoses, including but not limited to periapical pathology, traumatic tooth displacement, and vertical root fracture. This article discusses the use of CBCT imaging in the field of endodontics with an emphasis on its utilization to identify incidental findings, which can introduce complexities to a diagnosis and yield valuable information to enhance the scope of care for the patient.

A retrospective clinical study to compare the ability of cone-beam computed tomographic images and periapical radiographs to reveal cracked teeth, split teeth, and teeth with vertical root fractures.

BACKGROUND: This retrospective clinical study aimed to compare the sensitivity of cone-beam computed tomographic (CBCT) images and periapical (PA) radiographs to reveal cracked teeth, split teeth, and teeth with vertical root fractures (VRFs). METHODS: The authors included 98 patients (98 teeth) diagnosed with a longitudinal tooth fracture (LTF) (cracked tooth, split tooth, VRF) through direct visualization after extraction and with comprehensive clinical and radiographic records. They collected demographic, clinical, and radiographic data. The authors evaluated PA radiographs and CBCT images to identify fractures, fracture lines, and the different patterns of bone loss associated with these teeth. They used the McNemar test to compare PA radiographs and CBCT scans when assessing bone loss. They used the Fisher test to determine statistical relationships between fracture types and demographic, clinical, and radiologic traits. They used an analysis of variance test to compare patient age with fracture types. RESULTS: CBCT images were significantly more effective (P < .05) in detecting bone loss patterns associated with LTFs than with PA radiographs, with 71% of cases detected via CBCT images compared with 42% via radiographs. Mean age was significantly greater (P < .05) in patients with teeth with VRFs than in patients with split teeth. A significant relationship was observed between the type of fracture and the following variables: root canal treatment (split, VRF, P = .002), deep probing depth (≥ 5 mm) (VRF, P = .026), and having more than 8 teeth extracted from the mouth (VRF, P = .032). Overall, there was a significant difference (P < .001) between the visualization of fracture lines (45% on PA radiographs, 65% on CBCT images). CONCLUSIONS: CBCT scans provided more information on LTFs than PA radiographs, particularly in the identification of periradicular bone changes. PRACTICAL IMPLICATIONS: CBCT imaging can assist in making the clinical diagnosis of LTFs through observation of bone loss patterns, providing more information than PA radiographs.

Restoration of Teeth with Severely Compromised Tooth Structure using Digital Planning Combined with Orthodontic Magnetic Extrusion-A Report of 2 Cases.

This report outlines 2 digitally planned cases in which the teeth underwent magnetic extrusion to preserve the supracrestal tissue attachment and regain the ferrule, followed by their restoration. Case 1: A 42-year-old man with the chief concern of a fractured right maxillary second premolar. Following the completion of root canal treatment, the remaining tooth structure was insufficient to create a ferrule for tooth restoration. For this scenario, a rapid magnetic extrusion technique was performed on tooth #4 to obtain an approximate 3-mm ferrule. The condition of both the dentition and the restorative margin was acceptable 18 months following treatment. Case 2: A 62-year-old man with the chief complaint of mobility on both sides of the maxillary arch in relation to a tooth-supported fixed partial denture (FPD). Following removal of the FPD, multiple extractions were carried out and tooth #6 was subjected to magnetic extrusion in 3 stages to a maximum of 4 mm to obtain a ferrule. At the 18-month and 3-year follow-up appointments, the tooth had no symptoms and the gingiva around the restorations had optimal architecture and margins. The 3-dimensional digital planning was helpful in precisely positioning the magnets within the tooth and the provisional restorations to facilitate axial extrusion. The extruded teeth were restored with zirconia crowns in both cases. The beneficial outcomes observed from these cases provides evidence that the integration of digital planning and magnetic extrusion holds promise as a method for reconstructing teeth with crowns that are significantly compromised.

Healing and long-term prognosis of root-fractured permanent teeth: a retrospective longitudinal study.

AIM: The purpose of the present study was to evaluate permanent teeth with post-traumatic transversal root fractures, for their initial healing modality, the effect of candidate predictors and their long-term prognosis. METHODOLOGY: A retrospective longitudinal clinical study was conducted to evaluate records from patients bearing transversal root fractures in permanent teeth in order to radiographically assess short-term healing and non-healing events in the fracture line, their prognostic factors and their relationship with long term outcomes. The inter-fragmentary tissues were classified as healing: hard tissue (HT), connective tissue (CT) or connective tissue and bone (CT + B) and non-healing: interposition of granulation tissue (GT). A competing risk survival analysis was conducted to estimate the hazards of healing and non-healing events in the short-term and the effect of demographic, clinical, and treatment variables was assessed using the subdistribution regression model (Fine & Gray). RESULTS: Radiographic findings showed 61.4% of healing in the short-term being strongly influenced by the presence and type of concomitant injuries to the coronal fragment. Teeth with concomitant crown fractures (sHR 24.38, 95% CI [3.16-188.3], p = 0.0022), luxations with dislocations (sHR 10.58, 95% CI [1.37-81.9], p = 0.0240) and subluxations (HR 9.66, 95% CI [1.14-81.7], p = 0.0370) were more likely to present non-healing of root fractures in the short-term. The healing rate in the long-term was of 75.9%, most of them with interposition of bone and connective tissue. Kappa statistics demonstrated an overall agreement of 67.1% between short and long-term healing patterns, in special HT and CT + Bone modalities. CONCLUSION: Healing at the fracture site was the most frequent outcome, both in the short-term and in the long-term. Short-term healing modality was strongly influenced by the presence and type of concomitant injuries to the crown fragment, being the worst prognosis observed in root-fractured teeth with concomitant crown fractures, followed by concomitant luxations with dislocation. CLINICAL RELEVANCE: Post-traumatic transversal root fractures have a positive prognosis supporting therefore, a more conservative approach for these teeth before considering more radical treatments.

Influence of the metal post material, tooth location in the dental arch, and metal artifact reduction tool on vertical root fracture diagnosis in cone beam CT.

This study aimed to evaluate the influence of the metal post composition, tooth location in the dental arch, and metal artifact reduction (MAR) on vertical root fracture (VRF) diagnosis in cone beam computed tomography (CBCT). Twenty-two unirradicular premolars (12 sound and 10 fractured) and two alveolar sockets of a mandible (anterior and posterior regions) composed the sample. CBCT scans of each tooth with a metal post placed into the root canal-silver-palladium (Ag-Pd), cobalt-chromium (Co-Cr), or nickel-chromium (Ni-Cr)-were individually acquired for each mandibular region, and two conditions of MAR, using a OP300 device (Instrumentarium, Finland). Images were assessed by five evaluators independently for VRF detection. Diagnostic values were calculated and compared among all groups using multi-way ANOVA with Tukey post hoc test to investigate the effect of post material, anatomical region, and MAR on VRF diagnosis (α = 0.05). Values of area under the receiver operating curve and specificity were not influenced by the studied factors (p > 0.05). Sensitivity was influenced by the MAR in both mandibular regions (p < 0.05). In the anterior region, sensitivity values increased when the MAR was enabled, regardless of the metal post material (p < 0.05). Similar behavior was noticed in the posterior region for Ni-Cr (p < 0.05) but not for Ag-Pd and Co-Cr posts (p > 0.05). The MAR improved the sensitivity in VRF diagnosis for all tested metal posts in the mandibular anterior region and for the Ni-Cr post in the mandibular posterior region. Therefore, for images obtained in the OP300 CBCT device, activation of the MAR is suggested in these cases.

Radiographic Criteria for Differential Diagnosis Between Vertical Root Fracture and Apical Periodontitis in Single-Rooted Endodontically Treated Premolars Using Cone-Beam Computed Tomography.

INTRODUCTION: This study explores the differences between the patterns of bone defects associated with vertical root fracture (VRF) and apical periodontitis (AP) in single-rooted endodontically treated premolars (SRETPs) based on cone-beam computed tomography (CBCT) data. METHODS: Eighty-four SRETPs were extracted and categorized into the VRF and AP groups. On preoperative CBCT images, the location of bone defects according to the root thirds in buccolingual and mesiodistal directions across the study groups were compared. RESULTS: The majority of bone defects in the VRF group were longitudinal and combined, involving more than one root thirds in buccolingual and mesiodistal directions simultaneously. A uniform approach to comparing bone defects using the sites of periradicular area with bone loss as a comparison unit was developed. In the VRF group, bone loss sites in the middle and coronal thirds were detected more often and were located mainly buccolingually compared with the AP group (P < .001). CONCLUSION: Bone defects in the middle or middle and coronal root thirds in the buccolingual direction may be potential radiographic signs useful in differentiating between VRF and AP in SRETPs. The introduction of the uniform approach to assessment of bone loss patterns will give practitioners a single simple tool and improve the quality of endodontic treatment.

7.5- to 11.5-Year Follow-up of the Fracture Removal Treatment for Propagated Crown Fractures.

A definitive method to predictably treat propagated longitudinal fractures remains elusive. A proof-of-concept case report series documenting nonsurgical removal of propagated longitudinal fractures has shown up to 5 years of clinical and radiographic success. This installment of the case report series further documents these teeth with 7.5-year to 11.5-year recall evaluations. Three previously reported cases of fracture removal were followed at 11.5 years (1 case), 9.75 years (1 case), and 7.5 years (1 case) after treatment to determine the long-term clinical and radiographic success of nonsurgical fracture removal. This case report series has demonstrated 10-year success (clinically and radiographically) for the treatment of progressive longitudinal fractures. Propagated fractures can be nonsurgically removed and the iatrogenic defect repaired with long-term success providing a foundation for treatment and further investigation.

Influence of an adjacent zirconium implant, tube current, and metal artifact reduction algorithm on horizontal root fracture diagnosis in cone beam computed tomography.

OBJECTIVE: We evaluated the influence of an adjacent zirconium implant, tube current (mA), and a metal artifact reduction algorithm (MARA) on horizontal root fracture (HRF) diagnosis in cone beam computed tomography (CBCT). STUDY DESIGN: Nineteen teeth (9 with HRF, 10 without) were individually placed in a human maxilla. Scan volumes were acquired without and with a zirconium implant adjacent to the tooth at settings of 4, 8, and 10 mA, with MARA disabled and enabled, using a 5×5 cm field of view, 0.085-mm voxel size, and 90 kV. Four maxillofacial radiologists individually assessed the scans. Diagnostic metrics were compared by multiway analysis of variance (α=5%). Inter- and intraexaminer agreements for HRF diagnosis were evaluated with the weighted kappa test. RESULTS: Area under the receiver operating characteristic curve (AUC), sensitivity, and specificity were significantly lower in the presence of the implant (P≤.005). AUC values were higher in scans obtained with 8 and 10 mA compared with 4 mA (P=0.010), but 10 mA without MARA was better with the implant present. MARA did not significantly influence outcomes (P≥0.240). Inter- and intraexaminer agreements ranged from moderate to almost perfect. CONCLUSIONS: The presence of the zirconium implant impairs HRF detection. Settings of 8 or 10 mA improve HRF detection regardless MARA condition without the implant. With an adjacent implant, 10 mA without MARA is recommended to improve diagnostic performance.

Fragment Reattachment: A 4-Year Case Report of Uncomplicated Dental Fractures.

Two fractured maxillary central incisors were restored via the crown fragment reattachment technique with adhesive systems and composite resin material. A long-term successful outcome was achieved after 4 years of follow-up. The patient presented with fractured maxillary central incisors, and a comprehensive intraoral and radiographic examination revealed that both teeth had extended crown fractures with no pulpal exposure (Class II, Ellis and Davey). The tooth fragments were thoroughly cleaned and inspected before being repositioned. Both fragments were in excellent condition with almost no pieces missing. Therefore, the proposed treatment was fragment reattachment. After verifying the repositioning and adaptation of the fractured fragments, a flowable composite was used to perform the reattachment procedure under rubber dam isolation. With modern dental adhesives, the reattachment of tooth fragments in good condition is considered a more conservative option for restoring tooth morphology, esthetics, and function. Although one tooth showed signs of irreversible pulpitis and required root canal treatment 2 weeks after the restoration, the clinical and radiographic evaluations at the 4-year follow-up visits confirmed the success of the restorative treatment. The restorations showed good functional and esthetic outcomes after 4 years of follow-up.

Diagnostic efficacy of cone-beam computed tomography for detection of vertical root fractures in endodontically treated teeth: a systematic review.

BACKGROUND: Vertical root fractures (VRFs) sometimes occur in endodontically treated teeth. They have a difficult diagnosis and a dismal result. The objective of this review was to evaluate the diagnostic performance of cone-beam computed tomography (CBCT) for detecting VRFs in teeth that had undergone endodontic treatment. METHODS: Literature was reviewed from Web of Science, PubMed, Cochrane Review, SCOPUS, and Embase databases between 2000 and 2022. The searched keywords included "endodontically treated teeth," "cone-beam computed tomography," "CBCT," "tooth fracture," "vertical root fracture," "VRF," "accuracy," "sensitivity," and "specificity." Only articles in the English language were included. The final analysis included 20 papers that satisfied the eligibility requirements. RESULTS: The overall mean ± SD values (%) for the diagnostic sensitivity and specificity of CBCT for detection of VRFs in endodontically treated teeth in the presence of root-filling materials without an intracanal post were 71.50 ± 22.19 and 75.64 ± 19.41, respectively. The overall mean (SD) value (%) for the sensitivity of CBCT for the detection of VRFs in the presence of root-filling materials and intracanal posts was 72.76 (18.73), while the mean (SD) specificity was 75.44 (18.26). The accuracy of CBCT (mean ± SD) was 78.47 ± 17.19% and 74.02 ± 10.64%, respectively, for teeth without intracanal posts and those with posts. CONCLUSIONS: Further clinical research is needed to validate the optimum efficiency of CBCT as a diagnostic technique for detecting VRFs in teeth that have had endodontic treatment, given the low sensitivity, significant heterogeneity of studies, and lack of in-vivo studies on the subject.

Influence of voxel size and filter type on detecting vertical root fracture using cone-beam computed tomography.

Vertical root fractures (VRFs) can start at any level of the root and progress longitudinally to the coronal attachment. This study aimed to investigate the effects of different exposure parameters used when obtaining CBCT scans in detecting simulated VRFs. Hence, 80 intact human mandibular single-rooted pre-molar teeth without root fractures were included in the study. No statistically significant difference was found between the filters in terms of VRF detection in the group with the roots with only root canal filling (Groups 1 and 5); however, 100 voxels were found to be more successful in terms of VRF detection than other voxel sizes. Results of this study suggest that using lower voxel sizes leads to an accurate diagnosis of vertical root fracture, in addition, our results revealed that using AR filters did not improve the diagnostic accuracy in detecting VRFs.

[Effect of various intracanal materials on the diagnostic accuracy of cone-beam computed tomography in vertical root fractures].

OBJECTIVE: To study the effect of various intracanal materials on the accuracy of oral maxillofacial cone-beam computed tomography (CBCT) for the diagnosis of vertical root fracture (VRF). METHODS: A total of twenty-four structurally intact single root canal dried and isolated teeth extracted for orthodontic treatment or periodontal disease were collected. The teeth were decrowned along the cemento-enamel junction (CEJ) and then used as samples for the study after conventional root canal preparation and post preparation. The 24 samples were divided into two groups with 12 samples in each group. Group A was the control group (no VRF group). According to intracanal materials, they were divided into five subgroups: blank group, fiber post group, gutta-percha point group, titanium post group and gold-palladium post group. Group B was the experimental group (VRF group), and subgroups were grouped as above. The VRF model was prepared by a unified method in the VRF group: the root was completely fractured in the buccolingual direction with a custom root canal nail and then cemented and reset. The control group was not subjected to the simulation of VRF. Titanium post and gold-palladium post were made according to the individuality of the root canal preparation, and the tightness of the post to the root canal wall was confirmed by X-ray radiograph. Then all the samples were scanned by CBCT in the isolate swine mandibular alveolar sockets. The diagnostic accuracy was statistically analyzed via blind interpretation by experienced endodontic specialists and oral and maxillofacial medical imaging specialists. RESULTS: The accuracy of the diagnosis of VRF in the blank group, fiber post group, gutta-percha point group, titanium post group, and gold-palladium post group in CBCT was 95.83%, 91.67%, 87.50%, 79.17%, and 45.83%, respectively. Compared with the blank group, the differences were not statistically significant in the fiber post group (P>0.999), the gutta-percha point group (P=0.500) and the titanium post group (P=0.125). The lowest diagnostic accuracy of VRF was found in the gold-palladium post group, and the difference was statistically significant compared with all other groups (P < 0.001). CONCLUSION: Various intracanal materials have different degrees of influence on the diagnostic accuracy of VRF diagnosis in CBCT. The influence of fiber post, gutta-percha point and titanium post was small, while the influence of gold-palladium post was significant.

Management of Crown-root Fracture with 180-degree Rotation Replantation: a Report of 2 Cases.

Intentional replantation involves a combination of periodontics, endodontics, prosthodontics and oral surgery. Crown-root fracture management is still complicated nowadays. A fracture line extending longitudinally to the subgingival area and intruding bioogical width could affect infection control, gingival health and crown restoration. In the present study, we present two cases. Case 1 involved a 23-year-old man who presented at our hospital with crown-root fracture of the maxillary left central incisor. A radiographic image of the tooth revealed a fracture line under the alveolar crest. The fractured tooth was treated with intentional replantation with 180-degree rotation, root canal treatment and veneer restoration. The patient was followed up for 60 months. The replanted tooth functioned well, and no symptoms of resorption or ankylosis were observed by radiographic examination. Case 2 involved a 20-year-old woman who was referred to our hospital for crown-root fracture of her maxillary teeth. A radiographic examination revealed complicated crown-root fracture of the maxillary right lateral incisor and both maxillary central incisors. The central incisors were treated with intentional replantation with 180-degree rotation. At the 48-month follow-up, the fractured teeth were found to have regained normal function based on clinical and radiographic examination. Limited case reports are available on a long-term follow-up of intentional replantation with 180-degree rotation. These two cases, particularly case 2, presented optimal healing after 4 years with unideal crown-root ratios. This case report suggests that this old method of preserving teeth with crown-root fractures can be used as a last resort to save teeth owing to its timesaving and microinvasive procedure.

Managing a Deep Subgingival Cusp Fracture: Case Reports.

Cuspal fractures are relatively common. Fortunately for esthetics, when a cuspal fracture occurs in a maxillary premolar, it most commonly involves the palatal cusp. Fractures with a favorable prognosis may be approached with a minimally invasive treatment to successfully retain the natural tooth. This report describes 3 cases of "cuspidization" to treat maxillary premolars with cuspal fractures. After identifying a palatal cusp fracture, the fractured segment was removed, resulting in a tooth that closely resembles a cuspid. Depending on the extent and location of the fracture, root canal treatment was indicated. Subsequently, conservative restorations sealed the access and covered exposed dentin. Full coverage restorations were neither required nor indicated. The resulting treatment provided practical and functional treatment with a good esthetic outcome. When indicated, the described cuspidization technique can conservatively manage patients with subgingival cuspal fractures. The procedure is minimally invasive and cost-effective and can be done conveniently in routine practice.

Sensitivity and Specificity of MRI versus CBCT to Detect Vertical Root Fractures Using MicroCT as a Reference Standard.

INTRODUCTION: Vertical root fracture (VRF) in root-canal-treated teeth frequently results in tooth loss, partly because VRFs are difficult to diagnose and when detected the fracture is often beyond the point of preservation with surgical intervention. Nonionizing magnetic resonance imaging (MRI) has demonstrated the ability to detect small VRFs, but it is unknown how its diagnostic capabilities compare with the current imaging standard for VRF detection, cone-beam computed tomography (CBCT). This investigation aimed to compare the sensitivity and specificity between MRI and CBCT for detecting VRF, using micro-computed tomography (microCT) as a reference. METHODS: A total of 120 extracted human tooth roots were root canal treated using common techniques, and VRFs were mechanically induced in a proportion. Samples were imaged using MRI, CBCT, and microCT. Axial MRI and CBCT images were examined by 3 board-certified endodontists, who evaluated VRF status (yes/no) and gave a confidence assessment for that decision, from which a receiver operating characteristic curve was generated. Intra- and inter-rater reliability were calculated, sensitivity and specificity, and area under the curve. RESULTS: Intra-rater reliability was 0.29-0.48 for MRI and 0.30-0.44 for CBCT. Inter-rater reliability for MRI was 0.37 and for CBCT 0.49. Sensitivity was 0.66 (95% confidence interval [CI], 0.53-0.78) and 0.58 (95% CI, 0.45-0.70), and specificity 0.72 (95% CI, 0.58-0.83) and 0.87 (95% CI, 0.75-0.95) for MRI and CBCT, respectively. Area under the curve was 0.74 (95% CI, 0.65-0.83) for MRI and 0.75 (95% CI, 0.66-0.84) for CBCT. CONCLUSIONS: There was no significant difference in sensitivity or specificity between MRI and CBCT in detecting VRF, despite the early-stage development of MRI.

Detection of vertical root fractures by cone-beam computed tomography based on deep learning.

OBJECTIVES: This study aims to evaluate the performance of ResNet models in the detection of in vitro and in vivo vertical root fractures (VRF) in Cone-beam Computed Tomography (CBCT) images. METHODS: A CBCT image dataset consisting of 28 teeth (14 intact and 14 teeth with VRF, 1641 slices) from 14 patients, and another dataset containing 60 teeth (30 intact and 30 teeth with VRF, 3665 slices) from an in vitro model were used for the establishment of VRFconvolutional neural network (CNN) models. The most popular CNN architecture ResNet with different layers was fine-tuned for the detection of VRF. Sensitivity, specificity, accuracy, PPV (positive predictive value), NPV (negative predictive value), and AUC (the area under the receiver operating characteristic curve) of the VRF slices classified by the CNN in the test set were compared. Two oral and maxillofacial radiologists independently reviewed all the CBCT images of the test set, and intraclass correlation coefficients (ICCs) were calculated to assess the interobserver agreement for the oral maxillofacial radiologists. RESULTS: The AUC of the models on the patient data were: 0.827(ResNet-18), 0.929(ResNet-50), and 0.882(ResNet-101). The AUC of the models on the mixed data get improved as:0.927(ResNet-18), 0.936(ResNet-50), and 0.893(ResNet-101). The maximum AUC were: 0.929 (0.908-0.950, 95% CI) and 0.936 (0.924-0.948, 95% CI) for the patient data and mixed data from ResNet-50, which is comparable to the AUC (0.937 and 0.950) for patient data and (0.915 and 0.935) for the mixed data obtained from the two oral and maxillofacial radiologists, respectively. CONCLUSIONS: Deep-learning models showed high accuracy in the detection of VRF using CBCT images. The data obtained from the in vitro VRF model increases the data scale, which is beneficial to the training of deep-learning models.

Influence of the technical parameters of CBCT image acquisition on vertical root fracture diagnosis: a systematic review and meta-analysis.

OBJECTIVES: To evaluate the influence of image acquisition parameters (voxel, FOV, kVp, mA) on the accuracy of cone-beam computed tomography (CBCT) in detecting vertical root fracture (VRF). MATERIAL AND METHODS: Searches were performed in 6 main databases and the gray literature, without restrictions of language or date. Observational clinical studies (OCS) and in vitro-extracted teeth (IV) studies were considered eligible for inclusion when investigating the accuracy (sensitivity, specificity) of CBCT in detecting VRF in human teeth. The risk of bias was assessed using QUADAS-2, and a meta-analysis was performed using Review Manager v5.4 software and Jamovi software v1.6. RESULTS: A total of 60 out of 132 articles was included after fulfilling the eligibility criteria. Of these, 54 were IV studies while 6 were OCS. In the IV studies, it was seen that smaller FOV sizes tended to present higher accuracy values. The meta-analysis of the 6 OCS showed that the overall sensitivity and specificity values for 0.08 mm and 0.1 mm voxels were greater (0.84 and 0.79, respectively) than the sensitivity and specificity values for 0.125 mm and 0.2 mm voxels (0.70 and 0.55, respectively). CONCLUSIONS: Despite the uncertain risk of bias found for the IV and OCS studies, smaller voxel and FOV sizes seem to provide more accurate VRF detection values when using CBCT. CLINICAL RELEVANCE: This information is crucial for supporting the clinician when prescribing CBCT in cases of a clinical suspicion of VRF, and contributes to the personalization of the CBCT prescription, thereby ensuring greater accuracy in the VRF diagnosis. Registration This protocol was registered at the PROSPERO database (International Prospective Register of Systematic Review) under registration number CRD42020210118.