Comparison of the Effects of Different Palatal Morphology on Maxillary Expansion via RME and MSE: A Finite Element Analysis.

OBJECTIVES: This study aims to compare and analyze the biomechanical effect and the displacement trend of RME and MSE on the maxillofacial complex under different palatal shapes by using finite element analysis. METHODS: The three-dimensional model of maxillofacial complex was obtained from a computed tomography image of a person with a normal palate. Then, we modified the shape of the palate to obtain the model with a high palate. Additionally, two expander devices were considered. MSE and RME were created and four models were made: Model 1: Normal-palate craniomaxillofacial complex with RME expander; Model 2: Normal-palate craniomaxillofacial complex with MSE expander; Model 3: High-palate craniomaxillofacial complex with RME expander; Model 4: High-palate craniomaxillofacial complex with MSE expander. Then, lateral forced displacement was applied and the analysis results were obtained. RESULTS: The lateral displacement of the palatal suture of Model 3 is greater than that of Model 1, and the maxilla has more rotation. The crown/root ratio of Model 1 is significantly greater than that of the other three groups. Compared with Model 1, Model 3 has greater stress concentration in the superstructure of the craniomaxillofacial complex. Both of them have greater stress in the anchorage area than Model 2 and Model 4. CONCLUSION: Different shapes of the palate interfere with the effects of RME and MSE, and its influence on the stress distribution and displacement of the craniomaxillary complex when using RME is greater than MSE. The lateral displacement of the palatal suture of MSE is significantly larger than that of RME. It is more prone to tipping movement of the anchor teeth using RME under normal palate, and MSE may manage the vertical control better due to the smaller crown/root ratio than RME and intrusive movement of molars.

Evaluating palatal mucosal thickness in orthodontic miniscrew sites using cone-beam computed tomography.

PURPOSE: To comprehensively analyze the palatal thickness of soft tissues and determine optimal regions for the placement of palatal orthodontic miniscrews. METHODS: Cone-beam computed tomography (CBCT) images on the coronal plane were obtained from 60 patients (30 female, 30 male; age range 19-45; mean age 32 ± 11), with 3-mm intervals in the regions of the canine (Ca), first premolar (Pr1), second premolar (Pr2), midpoint between the first and second molars (M1-M2), first molar (M1), second molar (M2) and midpalate. RESULTS: The mucosal thickness measurements between the teeth showed significantly greater thickness in the Ca region at the 3 mm point, in the Pr1 region at the 6 mm point, and in the Pr2 region at the 9 and 12 mm points. At the 9 mm point, the Pr1 region demonstrated greater thickness than the M1-M2 whereas the Pr2 region was thicker than the M1 and M1-M2 regions. At the 12 and 15 mm points, the thickness increased from anterior to posterior: the Pr1 region was thinner than the Pr2, M1, and M2 regions and the Pr2 region was thinner than the M2 region. A schematization was devised for the optimal areas recommended for miniscrews in the palatal region. CONCLUSION: The mucosal thickness in the palatal region increases from anterior to posterior except the midpalatal region. Based on the results, in terms of soft tissue, the most suitable place for miniscrew placement is 6 mm from the gingival margin of the teeth and in the median portion of the palate. The findings may guide clinicians in choosing the optimal sites for palatal mini-implants.

Morphometric analysis of the skull base and palatal regions for gender identification using CBCT: a retrospective study.

Objectives: The objectives of this study were to evaluate the accuracy of morphometry of skull base and palate in gender discrimination using cone beam computed tomography (CBCT) scanning and to assess the accuracy of the results among a sample of the Arab population. Materials & Methods: Using CBCT scans, a cross-sectional analysis was conducted on 142 consented patients who underwent various dental procedures at the University Dental Hospital, Sharjah (UDHS). Of these patients, 70 were females and 72 were males, with respective means of 38.5 and 36.2 years. Eleven parameters related to skull base and palatal region were measured on the CBCT scans by two expert radiologists followed by statistical analysis. Results: There was significant gender-based difference in the mean palatal width (PW) (p = 0.001), mean palatal height (PH) (p = 0.005). Among other skull base region parameters that were significant in term of gender-based difference like; the clivus length (CL) (p < 0.001), occipital condyle height (OCH) (p < 0.001), basal angle (BA) (p = 0.006) and transverse diameter of foramen magnum (p = 0.003). Only palate variables showed a significant age difference. Discriminant analysis related to gender showed that occipital condyle height was the most accurate and best discriminator among the skull base region parameters. Conclusion: The use of discriminant analysis in CBCT based on skull base and palatal region variables provides an efficient method for determining gender, which is particularly valuable in forensic science and anthropological research. Significance of study: Accurate gender identification is crucial in forensic investigations, and the skull base region, being a stable and sexually dimorphic anatomical feature, can serve as a reliable marker for this purpose.

A comparative study of the application of three digital imaging techniques to assess the thickness of the palatal mucosa of the maxillary anterior teeth.

BACKGROUND: This study highlights the need for precise and efficient methods to measure palatal mucosal thickness in the maxillary anterior teeth, particularly for soft tissue augmentation in the aesthetic zone. The research evaluates three digital imaging techniques, suggesting that Cone Beam Computed Tomography (CBCT) combined with intraoral scanners (IOS) is a promising approach for reliable clinical assessment. METHODS: Ten volunteers with healthy periodontium were selected, and three methods were employed: CBCT-based indirect gingival imaging, modified soft tissue CBCT (ST-CBCT), and CBCT combined with IOS. Measurements of palatal mucosal thickness were taken at multiple points along the palatal gingival margin. Statistical analysis included Bland-Altman plots for method agreement and intraclass Correlation Coefficient (ICC) analysis for reliability. All measurements were standardized, repeated for consistency, and accurate to 0.01 mm to ensure reliability. RESULTS: The Bland-Altman plots showed that less than 5% of the points for palatal mucosal thickness differences measured by the gingival indirect radiographic method, modified ST-CBCT, and CBCT combined with IOS were located outside the 95% limits of agreement (LoA). The mean value of the differences was within 0.2 mm, indicating good clinical agreement among the three methods. The inter- and intra-study ICC values for palatal mucosal thickness measurements of the maxillary anterior teeth using the three CBCT methods were greater than 0.75 (P < 0.001), demonstrating reproducibility. CONCLUSIONS: Based on the evaluation of three digital imaging techniques, this study indicates that the combination of CBCT with IOS is a feasible method for measuring palatal mucosal thickness in the maxillary anterior teeth and demonstrates good reproducibility.

Gross and scanning electron microscopic features of the oral cavity (palate, tongue, and sublingual floor) of the Egyptian long-eared hedgehog (Hemiechinus auratus aegyptius).

The study was focused on the anatomical characteristics of the Egyptian long-eared hedgehog's oral cavity by using gross and scanning electron microscopic examinations. The upper lip had an elongated T-shaped snout-like structure. The hard palate had a triangular rostral part (which had a semicircular area and a caudal ridged area with the first 3 or 4 ridges) and a caudal part (which contained seven or eight slightly oblique ridges with raphae). The diamond-incisive papilla is flanked on both sides by a groove and a fissure. The hard palate surface had glandular openings and a microplicae system. The uneven, soft palate's surface had multiple grooves and folds with 12-16 Gemmal papillae. The Gemmal papillary surface had three to four taste pores with microplicae and glandular openings. The dorsal lingual surface had six filiform subtypes: pointed (on the tip, rostral border, and median apical region), triangular (on the lateral apical and circumvallate regions), bifurcated (on the median tip only), leaf-like (on the median body region), branched (on the lateral root region), and small pointed papillae (on the median root). There were two fungiform subtypes: ovals (on the rostral border and lateral region) and rounds (on the median apical region and body). The caudal root part had a triangular arrangement of three circumvallate papillae. In conclusion, the finding confirmed its oral cavity adaptation with its insectivorous feeding habits and Egyptian environment.

Genetic and environmental impact on variation in the palatal dimensions in permanent dentition: a twin study.

The objective of this study was to assess the relative contributions of genetic and environmental factors to variation in palatal parameters in twins with completed maxillary growth. The subjects of this study comprised digital dental casts of 50 monozygotic and 35 dizygotic twin pairs. The subjects' average age was 17.95 ± 2.83 years. Zygosity determination was carried out using 15 specific DNA markers and an amel fragment of the amelogenin gene. The interdental distances were measured between selected dental landmarks at the occlusal and gingival planes. The palatal height, surface area and volume were measured between the gingival plane and the midpalate suture. High heritability estimates were observed for all transverse intra-arch measurements. The palate height (a2 = 0.8), dental arch width in the molar area (a2 = 0.86), palatal surface area (a2 = 0.61) and palate volume (a2 = 0.69) were under strong additive genetic control. Moderate genetic dominance was observed for dental arch widths at the gingival line in the canine (d2 = 0.5) and premolar regions (d2 = 0.78-0.81). Sexual dimorphism was shown, with males exhibiting a greater arch width, palate surface area and volume than females (p < 0.01). The majority of palate parameters variation in twins was controlled by genetic effects, and most were highly heritable.

Efficacy of clear aligners vs rapid palatal expanders on palatal volume and surface area in mixed dentition patients: A randomized controlled trial.

INTRODUCTION: This study aimed to evaluate the efficacy of Invisalign First Phase I treatment compared with tooth-borne rapid maxillary expansion (RME) in mixed dentition patients by examining changes in palatal volume, palatal surface area, and maxillary interdental transverse measurements. METHODS: In this open-label, 2-arm, parallel, randomized controlled trial, patients with a posterior transverse discrepancy ≤6 mm were allocated into the clear aligner therapy (CAT) group (Invisalign First Phase I treatment) and RME group (tooth-borne RME) according to a computer-generated randomization list immediately before the start of treatment. Digital models were obtained before the beginning of the treatment (T0) and at the end of the retention period/treatment (T1) using an intraoral scanner. Palatal volume was measured as the primary outcome, and palatal surface area and intermolar and intercanine transverse widths at the cusps and gingival level were measured as secondary outcomes. Patients and interventionists were not blinded because of the nature of the intervention. RESULTS: Out of 50 patients, 41 (19 males and 22 females; mean age, 8.12 ± 1.53 years) were enrolled and divided into 2 groups: 20 in the CAT group and 21 in the RME group. Two participants did not receive the allocated intervention for different reasons (1 patient discontinued the intervention in the CAT group, and another patient was lost to follow-up in the RME group). Thus, 19 patients (5 males and 14 females; mean age, 8.48 ± 1.42 years) were analyzed from the CAT group, and 20 patients (12 males and 8 females; mean age, 7.83 ± 1.19 years) from the RME group. Regarding intragroup comparisons, all outcome measures significantly increased from T0 to T1 in both groups. In terms of intergroup comparisons, there were no significant differences in the variation (Δ) of outcome measures between the 2 groups from T0 to T1, except for the intermolar width at the gingival level (P <0.005). The change in palatal volume was 532.01 ±540.52 mm³ for the RME group and 243.95 ± 473.24 mm³ for the CAT group (P = 0.084), with a moderate effect size (d = 0.57). CONCLUSIONS: RME showed trends favoring better outcomes compared with Invisalign First Phase I treatment across all assessed measures. The only parameter that showed statistically significant differences between the 2 groups was variation in intermolar width at the gingival level, suggesting the occurrence of buccal tipping in patients undergoing Invisalign First Phase I treatment. TRIAL REGISTRATION: The trial was registered at ClinicalTrial.gov (no. NCT04760535).

Giant stem tetrapod was apex predator in Gondwanan late Palaeozoic ice age.

Current hypotheses of early tetrapod evolution posit close ecological and biogeographic ties to the extensive coal-producing wetlands of the Carboniferous palaeoequator with rapid replacement of archaic tetrapod groups by relatives of modern amniotes and lissamphibians in the late Carboniferous (about 307 million years ago). These hypotheses draw on a tetrapod fossil record that is almost entirely restricted to palaeoequatorial Pangea (Laurussia)1,2. Here we describe a new giant stem tetrapod, Gaiasia jennyae, from high-palaeolatitude (about 55° S) early Permian-aged (about 280 million years ago) deposits in Namibia that challenges this scenario. Gaiasia is represented by several large, semi-articulated skeletons characterized by a weakly ossified skull with a loosely articulated palate dominated by a broad diamond-shaped parasphenoid, a posteriorly projecting occiput, and enlarged, interlocking dentary and coronoid fangs. Phylogenetic analysis resolves Gaiasia within the tetrapod stem group as the sister taxon of the Carboniferous Colosteidae from Euramerica. Gaiasia is larger than all previously described digited stem tetrapods and provides evidence that continental tetrapods were well established in the cold-temperate latitudes of Gondwana during the final phases of the Carboniferous-Permian deglaciation. This points to a more global distribution of continental tetrapods during the Carboniferous-Permian transition and indicates that previous hypotheses of global tetrapod faunal turnover and dispersal at this time2,3 must be reconsidered.

Evaluating the long-term stability of a predefined palatal region for tooth movement analysis.

OBJECTIVES: We conducted a three-dimensional (3D) analysis of orthodontic tooth movement (TM) using digital dental models (DMs), focusing on the palatal region of interest (PROI), aiming to evaluate the long-term stability of the PROI, validate the 3D TM analysis with PROI registration, and compare it with conventional lateral cephalometric analyses. METHODS: Twenty adult patients treated with a multibracket appliance were evaluated at their first visit (T0) and at least 5 years later (T1) using DMs and lateral cephalograms (LCs). The long-term stability of PROI was assessed by calculating the point cloud distances between DM-T0 and DM-T1. TM analysis using DM with PROI registration for the maxillary central incisors was assessed through linear and angular measurements in the sagittal view and subsequently compared with the LCs. RESULTS: The average point cloud distance of the PROI between DM-T0 and DM-T1 was 0.21 mm (standard deviation, 0.13 mm). TM analysis using DMs demonstrated excellent reproducibility for both linear and angular measurements (intra-rater correlation coefficient, > 0.99). The 95 % limits of agreement between the DM and LC measurements were < 5.14° for angular change, 3.53 mm for horizontal displacement, and 0.98 mm for vertical displacement. No significant differences were observed in the angular and linear measurements when the TM was compared using the DMs and LCs. CONCLUSIONS: The PROI remained stable for over 5 years, supporting the reproducibility and accuracy of TM assessment using PROI registration in orthodontic clinical practice. CLINICAL SIGNIFICANCE: DM analysis lacks the risks associated with X-ray exposure and can be easily performed in daily clinical practice, indicating its potential for future clinical applications. These findings further support the use of DM with PROI registration for TM analysis in orthodontic clinical practice, emphasizing its long-term stability and reproducibility.

Morphological Variations of the Nasopalatine Canal in the North Cyprus Population: A Cone Beam Computed Tomography Study.

BACKGROUND This study aimed to evaluate the morphological characteristics of the anterior maxillary nasopalatine canal and the width of the buccal bone using cone-beam computed tomography (CBCT) in 150 adults in Northern Cyprus. MATERIAL AND METHODS The study included 150 participants, and their anterior maxillary morphometric measurements (eg, length of the nasopalatine canal and anteroposterior diameter of the nasal foramen) were taken using CBCT with the scanning parameters of 90 kvP, 24 s, 4 mA, voxel size 0.3 mm, and field of view 10×6 cm. The shapes of the nasopalatine canal (NPC) were categorized into 4 types: cylindrical, hourglass, funnel-shaped, and banana (54%, 20.6%, 18.6%, and 4%, respectively). RESULTS The findings showed a clear link between the shape of the NPC and the horizontal dimensions of the anterior maxilla's morphometric properties. In general, decreased horizontal bone dimensions were found in the premaxilla at the banana- and funnel-shaped type for the nasopalatine canal. Also, the anteroposterior diameter of a nasal foramen in the hourglass shape was significantly larger in diameter than all other shapes. Additionally, the morphology of the nasopalatine canal is influenced by its shape. The sagittal cross-section has shown significant correlations with the sizes of the incisive foramen, nasal foramen, and the length of the nasopalatine canal. CONCLUSIONS The study found a correlation between the shape of the NPC and the horizontal dimensions of the anterior maxilla's anatomy. The measurements of NPC in a North Cyprus population slightly differ from the established standards found in the existing literature. Conducting more extensive studies with a larger number of CBCT images will offer additional insights.

Morphological and Dimensional Analysis of the Nasopalatine Canal: Insights from Cone-Beam Computed Tomography Imaging in a Large Cohort.

BACKGROUND The nasopalatine canal (NPC), or incisive canal, is located in the midline of the palate, posterior to the maxillary central incisors. Its anatomy is important in prosthetic dentistry procedures. This study aimed to assess the anatomical morphology of the NPC according to age, sex, and dental status using cone-beam computed tomography (CBCT) in 335 patients. MATERIAL AND METHODS In this retrospective cross-sectional study, a total of 335 patients were recruited and categorized according to sex, age, and dental status. Individual CBCT images were analyzed in the sagittal, coronal, and axial planes. Also, we recorded the dimensions and morphological shape of the NPC and adjacent buccal bone plate (BBP) under standardized conditions. The associations between sex, age group, NPC shapes and types, and presence of central incisors were assessed. A significance level was set at P<0.05. RESULTS Mean labio-palatal and mediolateral measurements of the incisive foramen were 5.13±1.45 mm and 3.21±0.96 mm, whereas the mean diameter of Stenson foramen was 2.57±1.25 mm, and the total length of the NPC was 11.79±2.50 mm. Funnel, Y, and round-shaped canals were the most prevalent shapes of the NPC in sagittal, coronal, and axial planes. BBP was greater in men, with P=0.011, P=0.000, and P=0.001 at BBP1, BBP2, and BBP3, respectively. CONCLUSIONS NPC and BBP parameter values were slightly higher among male patients. NPC parameters increased with older age. The crest width of BBP decreased with older age and after missing maxillary central incisor teeth.

Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

How palatal vault morphology and screw length influence the accuracy of dynamic computer-guided orthodontic miniscrew insertion. A prospective clinical study.

OBJECTIVES: The aim of this study was to evaluate the influence of palatal vault morphology and screw length on the accuracy of miniscrew insertion in dynamic computer-assisted surgery (d-CAS). METHODS: Twenty-four subjects were allocated into three groups, according to their palatal vault morphology (Group A: medium; Group B: steep/high; Group C: low/flat) and the length of miniscrew used. For each subject, two miniscrews were inserted using a dynamic navigation system. To assess the accuracy of insertion, a postoperative CBCT was performed, and the pre- and post-operative scans were superimposed. Five variables were evaluated: Entry-3D, Entry-2D, Apex-3D, Apex-vertical and angular deviation. Descriptive statistics, Shapiro-wilk, Kruskal-Wallis and Dunn's tests were used for the statistical analysis. The level of significance was P ≤ 0.05. RESULTS: The mean angular deviation values revealed strong discrepancies amongst the groups (Group A:7.11°±5.70°; Group B:13.30°±7.76°; Group C:4.92°±3.15°) and significant differences were found regarding the Apex-3D (P = 0.036) and angular deviations (P = 0.008). A Dunn's test revealed differences in angular deviation between the medium and high/steep palate group (P = 0.004), and between low/flat and high/steep palate group (P = 0.01) but did not confirm any significant difference in the Apex-3D parameter (Group A-B P = 0.10; Group B-C, P = 0.053; Group A-C, P = 1.00). No significant differences were found regarding the length of the miniscrews. CONCLUSIONS: Palatal vault morphology is a factor that influences the accuracy of miniscrew insertion in d-CAS. In subjects with steep and high palatal vaults, insertion accuracy is lower when considering the angular deviation value. Miniscrew length does not influence accuracy. CLINICAL SIGNIFICANCE: Although computer-guided surgery assists the clinician in preventing damage to nearby anatomical structures, individual anatomical variability is a crucial variable. In subjects with a high/steep palate, greater attention should be paid during the planning phase in order to allow for a wide margin from adjacent anatomical structures to achieve better outcomes.

Morphological evaluation of the nasopalatine canal using cone beam computed tomography and its clinical implications for orthodontic miniscrew insertion.

BACKGROUND: The morphology of the nasopalatine canal is crucial in the planning of prosthetic restorations in the anterior region of the maxilla, as well as in the placement of orthodontic mini-implants. OBJECTIVES: The aim of this study was to assess the morphology of the nasopalatine canal using cone beam computed tomography (CBCT) scans of patients from the University Dental Clinic in Krakow, Poland, to define the position of the canal in relation to common sites of palatal median microimplant placement, and to investigate potential correlations between the anatomy of the canal and age and gender of the patients. MATERIAL AND METHODS: A total of 120 CBCT images were used to assess the anatomy of the nasopalatine canal in 3 planes of space. The bone thickness anterior to the nasopalatine canal and the distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position were also measured. RESULTS: The most frequently observed canal type in the coronal plane was the Y-shaped canal, which was present in 60.8% of patients. The nasopalatine canal was classified as cone-shaped in 31.7% of the scans, cylindrical in 28.3%, hourglass-shaped in 27.5%, and banana-shaped in 12.5%. The mean length of the nasopalatine canal was 11.58 mm. The mean width of the canal was 2.89 mm at the nasal fossa level, 1.94 mm in the middle, and 5.09 mm at the palatal level. The mean bone thickness anterior to the nasopalatine canal was 9.07 mm at the level of the nasal opening, 6.84 mm at the level of the oral opening, and 7.32 mm in the middle. The mean distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position varied from 0 to 11.94 mm, with a mean of 2.49 mm. CONCLUSIONS: Given the variety of nasopalatine canal forms and dimensions, detailed analysis of CBCT scans is essential prior to the placement of implants and microimplants.

Evaluating the influence of palate scanning on the accuracy of complete-arch digital impressions-An in vitro study.

OBJECTIVES: To assess the impact of including the palate and the number of images recorded during intraoral digital scanning procedure on the accuracy of complete arch scans. METHODS: An experienced operator conducted 40 digital scans of a 3D printed maxillary model and divided them into two groups: 20 with inclusion of the palate (PAL) and 20 without (NPAL). Each set of scans was performed using an intraoral scanner (IOS) (Trios 5; 3Shape A/S; Copenhagen, Denmark). The resulting STL files were imported into the Geomagic Control X software (3D Systems, Rock Hill, SC, USA) for accuracy comparison. A reference STL file was created using a 3Shape E3 laboratory scanner (3Shape Scanlt Dental 2.2.1.0; Copenhagen, Denmark). The number of images captured was recorded during the scanning procedure. RESULTS: In the case of the right side no statistically significant difference in trueness was detected (84 µm ± 45.6 for PAL and 80.4 ± 40.4 µm for NPAL). In the case of the left side no significant difference in trueness was observed (215.1 ± 70.2 µm for PAL and 233.9 ± 70.7 µm for NPAL). In the case of the arch distortion a statistically significant difference in trueness was seen between the two types of scans (135.3 ± 71.9 µm for PAL and 380.4 ± 255.1 µm for NPAL). The average number of images was 831.25, and 593.8 for PAL and NPAL, respectively. CONCLUSIONS: Scanning of the palatal area can significantly improve the accuracy of dental scans in cases of complete arches. In terms of the number of images, based on the current results, obvious conclusions could not be drawn, and further investigation is required. CLINICAL SIGNIFICANCE: Scanning the palate may be beneficial for improving the accuracy of intraoral scans in dentate patients. Consequently, this should be linked to an appropriate scanning strategy that predicts palatal scanning.

Ultrasonic mapping of midpalatal suture - An ex-vivo study.

OBJECTIVE: Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency. METHODS: An ex-vivo US scanning was conducted on the upper jawbones of two piglet's carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT. RESULTS: The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively. CONCLUSIONS: It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound. CLINICAL SIGNIFICANCE: This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency.

Correlation of palatal anatomic characteristics with dermatoglyphic heterogeneity in different growth patterns.

AIM AND OBJECTIVE: The study aimed to explore the correlation between dermatoglyphic patterns and quantitative palatal anatomic variables in individuals with different growth patterns. MATERIALS AND METHOD: A cross-sectional study was conducted involving 126 healthy patients aged 17-25 years. Participants were divided into three groups based on growth patterns: average, vertical, and horizontal. Dermatoglyphic patterns were recorded using an optical fingerprint sensor, and palatal characteristics were measured using digital software. Palatal characteristics, including intercanine width, intermolar width, and palatal depth, were measured using digital software. The results were statistically analyzed. RESULTS: Significant differences were observed in ridge counts among the three growth patterns. The average growth pattern showed lower ridge counts compared to the vertical and horizontal growth patterns. Dermatoglyphic patterns, such as double loops and tented arches, were significantly higher in the horizontal growth pattern. Weak correlations were found between certain dermatoglyphic patterns and palatal characteristics, with simple arch patterns showing a negative correlation with inter-canine width and symmetrical whorl patterns showing a positive correlation with palatal depth. Loop patterns, spiral patterns, double loop patterns, symmetrical whorl, and simple arch patterns were significant predictors of growth patterns. CONCLUSION: This study revealed distinct dermatoglyphic patterns and ridge counts among individuals with different growth patterns. Weak correlations were observed between dermatoglyphic patterns and palatal characteristics. However, the predictive value of dermatoglyphics for skeletal malocclusion requires further investigation. Understanding the relationships between dermatoglyphic patterns and craniofacial growth can provide valuable insights into genetic and developmental factors affecting dental and orthodontic conditions.

Histological assessment and gene expression analysis of intra-oral soft tissue graft donor sites.

AIM: To determine the structural and gene expression features of different intra-oral soft tissue donor sites (i.e., anterior palate, posterior palate, maxillary tuberosity and retromolar pad). MATERIALS AND METHODS: Standardized mucosal tissue punch biopsies were collected from at least one donor site per subject. Histological processing was performed to determine tissue morphometry and quantify collagen composition. Site-specific gene distribution was mapped using targeted gene expression analysis and validated using real time polymerase chain reaction (qPCR). RESULTS: A total of 50 samples from 37 subjects were harvested. Epithelial thickness did not differ between sites. However, lamina propria was thicker in the maxillary tuberosity (2.55 ± 0.92 mm) and retromolar pad (1.98 ± 0.71 mm) than in the lateral palate. Type I collagen was the predominant structural protein in the lamina propria (75.06%-80.21%). Genes involving collagen maturation and extracellular matrix regulation were highly expressed in the maxillary tuberosity and retromolar pad, while lipogenesis-associated genes were markedly expressed in the lateral palate. The retromolar pad showed the most distinct gene expression profile, and the anterior and posterior palate displayed similar transcription profiles. CONCLUSIONS: Tissue samples harvested from the anterior and posterior palate differed morphologically from those from the maxillary tuberosity and retromolar pad. Each intra-oral site showed a unique gene expression profile, which might impact their biological behaviour and outcomes of soft tissue augmentation procedures.

Análisis de las Variaciones Anatómicas y Dimensionales del Canal Nasopalatino Mediante Tomografía Computarizada de Haz Cónico / Analysis of the Anatomical and Dimensional Variations of the Nasopalatine Canal by Cone Beam Computed Tomography

El conocimiento anatómico del canal nasopalatino (CNP) es fundamental para la realización de cirugías en el sector anterior del maxilar y así prever posibles complicaciones. El objetivo de este trabajo es evaluar y determinar las variaciones anatómicas y dimensionales del CNP según sexo, edad y estado dental. Este estudio transversal analizó un total de 251 imágenes de TCHC obtenidas de la base de datos del Servicio de Imagenología Oral y Maxilofacial de la Facultad de Odontología de la Universidad Andrés Bello, Viña del Mar, Chile. Para evaluar la asociación estadística entre variaciones del CNP con sexo, edad y estado dentario se realizó la prueba T de Student, chi-cuadrado y ANOVA (p0,05). Además, se detectó diferencia significativa entre el estado dentario y la dimensión de la tabla vestibular en relación con el CNP (p<0,01). Se deben considerar las variaciones de CNP para evitar posibles complicaciones durante los procedimientos quirúrgicos.

SUMMARY: Anatomical knowledge of the nasopalatine canal (PNC) is essential for performing surgeries in the anterior sector of the maxilla and thus anticipating possible complications. The objective of this work is to evaluate and determine the anatomical and dimensional variations of the CNP according to sex, age and dental status. This cross-sectional study analyzed a total of 251 CBCT images obtained from the database of the Oral and Maxillofacial Imaging Service of the Faculty of Dentistry of the Andrés Bello University, Viña del Mar, Chile. To evaluate the statistical association between CNP variations with sex, age and dental status, the Student's T test, chi-square and ANOVA (p0.05). In addition, a significant difference was detected between the dental state and the dimension of the vestibular table in relation to the CNP (p<0.01). CNP variations should be considered to avoid potential complications during surgical procedures.