Solidification and utilization of municipal solid waste incineration ashes: Advancements in alkali-activated materials and stabilization techniques, a review.

Researchers are actively investigating methodologies for the detoxification and utilization of Municipal Solid Waste Incineration Bottom Ash (MSWIBA) and Fly Ash (MSWIFA), given their potential as alkali-activated materials (AAMs) with low energy consumption. Recent studies highlight that AAMs from MSWIFA and MSWIBA demonstrate significant durability in both acidic and alkaline environments. This article provides a comprehensive overview of the processes for producing MSWIFA and MSWIBA, evaluating innovative engineering stabilization techniques such as graphene nano-platelets and lightweight artificial cold-bonded aggregates, along with their respective advantages and limitations. Additionally, this review meticulously incorporates relevant reactions. Recommendations are also presented to guide future research endeavors aimed at refining these methodologies.

Co-melting mechanisms for municipal solid waste incineration fly ash with fine slag from coal gasification and coal gangue.

Vitrification is a promising treatment for municipal solid waste incineration fly ash (MSWI-FA); however, high energy consumption due to the high MSWI-FA fusion temperature limits the development and application of this technique. In this study, fine slag ash (FSA) derived from coal gasification and coal gangue ash (CGA) were mixed with MSWI-FA to reduce the ash fusion temperature. The transformation of minerals in ash during thermal treatment was examined via X-ray diffraction and thermodynamic equilibrium calculations. The ash flow behaviour was observed using a thermal platform microscope, and the silicate structure was quantified using Raman spectra. The co-melting mechanisms for the mixed ash were systematically investigated. Results indicate that the flow temperature (FT) of the mixed ash exhibited an initial decrease and subsequent increase as a function of the addition ratio of FSA or CGA. Lowest ash FT of 1215 °C and 1223 °C were recorded for addition of 50% FSA and 50% CGA, respectively; further, these temperatures were lowered by > 285 °C and >277 °C respectively, relative to FT of the MSWI-FA. The transformation of minerals and silicate structure during mixed ash heating was responsible for the variation in the ash fusion temperature. CaO in MSWI-FA tended to react with mullite, quartz and haematite in FSA and CGA, forming minerals such as anorthite, gehlenite, and andradite with relatively low melting points. The addition of FSA or CGA caused changes in the silicate network structure of the mixed ash. In particular, 50% FSA incorporation caused the transformation of Q4 and Q3 to Q2, whereas 50% CGA introduction resulted in the conversion of Q4 and Q2 into Q3 and Q1 + Q0, respectively. The silicate network depolymerised, causing reduction in the ash fusion temperature and increasing the melting rate.

Mineral transformation and solidification of heavy metals during co-melting of MSWI fly ash with coal fly ash.

Melting is an efficient method to turn municipal solid waste incineration (MSWI) fly ash (FA) into non-hazardous material. Coal fly ash (CFA) was selected as the silica-alumina source to carry out co-melting research with MSWI FA in this work. The effects of the temperature and the CFA content on mineral transformation and the migration characteristics of heavy metals were analyzed. The results showed that the mixtures of MSWI FA and CFA reacted at high temperatures to mainly generate Ca2Al2SiO7, Ca2SiO4, and CaAl2Si2O8 primarily and then melted and formed the amorphous-phase vitreous body when the CFA content was more than 40% and the temperature was higher than 1300 °C. During the melting process, Cd and Pb were almost volatilized, while Cr, Mn, and Ni were almost retained. Besides, the volatilization rates of Cu and Zn fluctuated with the temperature and the CFA content. Suitable treatment temperature and CFA content were conducive to the transformation of the heavy metals in the FA into stable forms, and the melting products were no longer hazardous wastes because the vitreous body could effectively encapsulate heavy metals. This study aims to help reuse the FA and CFA collaboratively and be more environmentally friendly.

Recognition of screening out hierarchical toxic contaminants tuned by quantified pseudo-components from complex engineering co-combustion.

Co-combustion of industrial and municipal solid wastes has emerged as the most promising disposal technology, yet its effect on unknown contaminants generation remains rarely revealed due to waste complexity. Hence, six batches of large-scale engineering experiments were designed in an incinerator of 650 t/d, which overcame the inauthenticity and deviation of laboratory tests. 953-1772 non-targeted compounds were screened in fly ash. Targeting the impact of co-combustion, a pseudo-component matrix model was innovatively integrated to quantitatively extract nine components from complex wastes grouped into biomass and plastic. Thus, the influence was evaluated across eight dimensions, covering molecular characteristics and toxicity. The effect of co-combustion with biomass pseudo-components was insignificant. However, co-combustion with high ratios of plastic pseudo-components induced higher potential risks, significantly promoting the formation of unsaturated hydrocarbons, highly unsaturated compounds (DBE≥15), and cyclic compounds by 19 %- 49 %, 17 %- 31 %, and 7 %- 27 %, respectively. Especially, blending with high ratios of PET plastic pseudo-components produced more species of contaminants. Unique 2 Level I toxicants, bromomethyl benzene and benzofuran-2-carbaldehyde, as well as 4 Level II toxicants, were locked, receiving no concern in previous combustion. The results highlighted risks during high proportion plastics co-combustion, which can help pollution reduction by tuning source wastes to enable healthy co-combustion.

Multi-criteria sustainability assessment of solid waste management in Jordan.

This study comprehensively evaluates Jordan's municipal solid waste (MSW) management sector from 2022 to 2030, in alignment with Jordan Vision 2030. This study introduces new sustainability indicators and innovative waste management alternatives to address the challenges of rapid industrialization and population growth. Four strategic scenarios-1) recycling, composting, and sanitary landfilling; 2) recycling, anaerobic digestion, and sanitary landfilling; 3) incineration and sanitary landfilling; and 4) sanitary landfilling alone-were assessed against the business-as-usual scenario. Using multi-criteria decision analysis (MCDA) and sensitivity analysis, this study evaluates net greenhouse gas emissions, annual operating expenses, revenue streams, and employment rates to measure environmental, economic, and social sustainability. The results indicate that Scenario 1 is the optimal scenario for integrating a material recovery facility (MRF) with a composting plant and sanitary landfill, achieving the lowest greenhouse gas emissions, annual costs, and employment opportunities. This study offers practical and sustainable solutions to Jordan's waste management challenges, provides novel insights through the developed MCDA and sensitivity analysis, and significantly contributes to sustainability research.

Serum metabolism distribution in individuals exposed to dioxins: A case study of residents near the municipal solid waste incinerators in China.

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) have attracted considerable attention owing to their environmental persistence, bioaccumulation, and high toxicity. This study aimed to investigate changes in serum metabolites following exposure to PCDD/Fs and to reveal a novel pathogenesis of PCDD/Fs. Serum samples were collected from 75 residents living near a municipal solid waste incinerator in China to analyse the relationship between PCDD/Fs and serum metabolic components. The serum level in the low-exposure group [19.07 (13.44-23.89) pg-TEQ/L] was significantly lower than that in the high-exposure group [115.60 (52.28-592.65) pg-TEQ/L]. Non-targeted metabolomic studies based on liquid chromatography-high resolution mass spectrometry have been applied to the metabolomic analysis of serum. Thirty-seven metabolites with significant differences among the different groups were identified as biomarkers. Pathway analysis revealed that high dioxin exposure perturbed various biological processes, including glycerol phospholipid metabolism and the interconversion of pentose and glucuronate. The results of a population health survey showed that the serum dioxin concentration in patients with diabetes was significantly higher than that in the control population. These findings suggest that dioxin exposure is associated with several potential adverse health risks, including inflammation, diabetes, and cardiovascular disease, through metabolic changes.

Regulatory compliance of PCDD/F emissions by a municipal solid waste incinerator. A case study in Sant Adrià de Besòs, Catalonia, Spain.

Despite incineration is an important emission source of toxic pollutants, such as heavy metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), it is still one of the most widely used methods for the management of municipal solid waste. The current paper summarizes the results of a 20-year follow-up study of the emissions of PCDD/Fs by a municipal solid waste incinerator (MSWI) in Sant Adrià de Besòs (Catalonia, Spain). Samples of ambient air, soils and herbage were periodically collected near the facility and the content of PCDD/Fs was analyzed. In the last (2017) survey, mean levels in soil were 3.60 ng WHO-TEQ/kg (range: 0.40-10.6), being considerably higher than the mean concentrations of PCDD/Fs in soil samples collected near other MSWIs in Catalonia. Moreover, air PCDD/F concentrations were even higher than those found in a previous (2014) survey, as they increased from 0.026 to 0.044 pg WHO-TEQ/m3. Ultimately, the PCDD/F exposure would be associated to a cancer risk (2.5 × 10-6) for the population living in the surrounding area. Globally, this information indicates that the MSWI of Sant Adrià de Besòs could have had a negative impact on the environment and potentially on public health, being an example of a possible inappropriate management for years. The application of Best Available Techniques to minimize the emission of PCDD/Fs and other chemicals is critical.

Impacts of advanced metals recovery on municipal solid waste incineration bottom ash: aggregate characteristics and performance in portland limestone cement concrete.

The optimization of alternative materials in concrete production continues to garner considerable attention in order to meet sustainability goals and supplement natural materials. Portland limestone cement (PLC) and municipal solid waste incineration (MSWI) bottom ash (BA) have been proposed separately as green cement and coarse aggregate supplement in low-strength concrete production, creating sustainable products and alternative disposal scenario for a waste material. This study discusses the impact of advanced ash processing techniques on aggregates and presents the performance of concrete incorporating both of these products with PLC for the first time. Two sources of MSWI BA were investigated, one as-produced (TMR) and one processed with novel advanced metals recovery (AMR). The AMR process reduced total Al content in ash compared to TMR (20,500 vs 17,000 mg/kg), though not aluminum oxide content, as the AMR process targets metallic aluminum. A composition study on both aggregates supports a reduction in ferrous and non-ferrous metals following the AMR process. All control and test mixes met 28-day compressive strength requirements (17 Mpa). Both AMR and TMR MSWI BA-amended concretes yielded compressive strengths below control specimens (no ash) ranging from 17 to 23 MPa, with little to no difference observed dependent on MSWI BA processing. The life-cycle discussion supports benefits deriving from supplementing naturally mined materials and recovering ferrous and nonferrous metals with the AMR process.

Characteristics of pollutant generation from 3D-printed photocured waste combustion.

With the rapid advancement of photopolymerization-based 3D printing technology, the volume of PCW has experienced a sharp increase. The potential environmental ramifications of PCW disposal demand careful consideration, especially given its current practice of being incineration alongside MSW. In this study, the TG-MS/FTIR system was carried out to probe the thermogravimetric characteristics and volatile byproducts during combustion. Various product compositions resulting from different mixing ratios of PCW incineration with MSW were investigated. It was observed that fluorene (C13H10) and triphenylene (C18H12) produced by PCW combustion 0.52 mg/g and 0.43 mg/g respectively, which are twice as abundant as those generated from normal plastic. When PCW incineration along with MSW, compounds such as naphthalene (C10H8), cyclohexane (C6H12), and heptane (C7H16) were generated in concentrations of 1.25 mg/g, 1.05 mg/g, and 0.95 mg/g respectively, which are at least twice as much as with MSW incineration alone. The incineration of PCW with rubber and textiles resulted in the production of 2.34 mg/g to 3.76 mg/g more PAHs compared to PCW combustion alone. The incineration of PCW with paper resulted in the production of 3.12 mg/g to 5.15 mg/g more heptane, nonane, cyclohexane, pyrene, and anthracene than PCW combustion alone. Incineration of PCW with wood proved to be the cleanest method, with product contents primarily below 0.10 mg/g. When incinerated with food residues or normal plastic, most of the product content remained below 0.05 mg/g. Considering the environmental pollution resulting from PCW combustion, the disposal of PCW warrants careful consideration and management.

The reduction of the carbon footprint of municipal solid waste management via source classification and supporting strategies: An analysis for the megacity of Shenzhen.

Municipal solid waste (MSW) management is a critical concern in megacities that depend heavily on external material and energy inputs but lack space for waste disposal. MSW treatment is a significant contributor to carbon emissions. The implementation of source classification improved the overall MSW management system and enhanced resource recovery from MSW. However, the precise contribution of source classification to carbon emissions reduction remains unclear. This study aimed to analyze the carbon emissions evolution in the MSW management of Shenzhen, a prototypical megacity in China, using data from 2006 to 2020 and employing carbon footprint assessment methodologies. The results demonstrated that source classification reduced the carbon emissions from 0.19-0.25 to 0.14-0.18 t CO2-eq/t MSW when considering the contribution of the urban environmental sanitation management department. The entire MSW management system becomes a carbon sink when considering recyclables collected by commercial enterprises. Although the source classification complicated the collection and transportation of MSW, the carbon offset effect of recycling food waste and recyclables was more significant than that of carbon emissions from collection and transport. Moreover, the landfill gas recovery rate critically influenced the carbon emissions of landfill-based MSW management systems. In contrast, the recovery of plastics was crucial for determining carbon emissions from incineration-based MSW management systems.

Quantification and forecast of GHG emissions from municipal solid wastes by multi-expression programming method.

The municipal solid waste (MSW) management is significantly contributing to global greenhouse gas (GHG) emissions. Analyzing the emission pattern of GHGs from MSW is essential for formulating appropriate carbon mitigation policies. Based on IPCC Models, GHG emissions from MSW were calculated in Chinese provinces from 2004 to 2021 by landfilling and incineration operations, separately. Landfilling and incineration generated approximately 1271 MtCO2-eq and 198 MtCO2-eq from 2004 to 2021, respectively. GHG emissions from landfilling increased from 2004 to 2020 and declined in 2021, while GHG emissions from incineration demonstrated an increasing trend with three distinct growth stages. A panel regression model was then employed to identify the key factors influencing GHG emissions. GDP and population are positively related to GHG emissions from landfills, while PCCE is negatively related to GHG emissions from landfills. GDP and PCCE have a positive impact on GHG emissions from incineration, while population showed no significant impact. Multi-expression programming was used to develop an explicit model, forecasting GHG emissions from MSW by 2030. From 2022 to 2024, GHG emissions from landfills will quickly decrease, while GHG emissions from incineration will rapidly increase. Subsequently, the GHG emission rate of incineration will slow down, and GHGs from landfilling will slowly decrease due to no MSW for landfill disposal. The methods and results provide insightful information for policy-makers and waste management sector.

Reuse potential of municipal solid waste incinerator bottom ash as secondary aggregate: Material characteristics, persistent organic pollutant content and effects of pH and selected environmental lixiviants on leaching behaviour.

Increasing municipal solid waste (MSW) production poses challenges for sustainable urban development. Modern energy-from-waste (EfW) facilities incinerate MSW, reducing mass and recovering energy. In the UK, MSW incineration bottom ash (MSW IBA) is primarily reused in civil engineering applications. This study characterizes UK-produced MSW IBA, examining its pH-dependent leaching behaviour and response to environmental lixiviants. Results show predominant components include a melt phase, primary glass and fine ash aggregations, and a chemical composition dominated by SiO2 (30-50 %), CaO (∼15 %), Fe2O3 (∼10 %), and Al2O3 (∼8%). X-ray absorption near edge structure (XANES) analysis shows that Zn and Cu are most likely oxygen-bound (adsorbed to oxy-hydroxides and as oxides) with some sulphur bound. Polychlorinated biphenyls (PCBs) and polychlorinated dibenzodioxins/furans (PCDD/Fs) are well below regulatory limits, and polycyclic aromatic hydrocarbons (PAHs) were undetectable. Leaching tests indicate trace elements mobilize at pHs ≤ 6. With a natural pH of 11.3 and high buffering capacity, significant acid inputs to the MSW IBA are required to reach this pH, which are improbable in the environment. Wood chip additions increase leachate's dissolved organic carbon (DOC) and reduce pH, but had minimal impact on metal-leaching behaviour. Synthetic plant exudate solutions minimally affect metal leaching at realistic concentrations, only enhancing leaching at ≥ 1500 mg l-1 DOC. This work supports MSW IBA's low-risk in specified civil engineering applications.

Comparison and mechanism analysis of MgO, CaO, and Portland cement for immobilization of heavy metals in MSWI fly ash.

The significant production of municipal solid waste incineration fly ash (MSWI FA) underscores the importance of developing efficient solidification materials. This study employed MgO and CaO for immobilizing MSWI FA (with a 70% fly ash incorporation), and the immobilization effect was compared with that of Portland cement (PC). Experimental findings revealed that MgO exhibited the most effective stabilization for heavy metals (Cd, Cu, Pb, and Zn) compared to CaO and PC. XRD, FTIR, TG, and SEM analysis indicated that the principal hydration products in MSWI FA binders solidified with MgO, CaO, and PC were Mg(OH)2, CaCO3, and C-S-H gel, respectively. Mg(OH)2 efficiently immobilized heavy metals through chemical complexation and surface adsorption mechanisms. The MgO-treated MSWI FA demonstrated the highest residual fractions and the lowest easily leachable fractions. Moreover, the leaching characteristics of heavy metals were significantly influenced by the pH level, so MgO-treated MSWI FA with a leachate pH of 9.18 achieved the precipitation and stabilization of most heavy metals. In summary, this study provided an effective material selection for MSWI FA immobilization and presented a novel strategy for MSWI FA management.

Temporal change and impact on air quality of an energy recovery plant using the M-BACI design in Gipuzkoa.

A significant concern in our society is the potential impact on both health and the environment of air pollutants released during the incineration of waste. Therefore, it is crucial to conduct thorough control and monitoring measures. In this context, the objective of this research was to study the evolution of particulate matter (PM2.5) and associated trace elements during the period before and after the installation of an Energy Recovery Plant (ERP). For that, a descriptive and temporal analysis of PM2.5 concentration and composition were performed on two similar areas (impact/control) using the Before-After/Control-Impact (BACI) design and two periods (before from January 01, 2018 to February 06, 2020 and after from December 10, 2020 to September 30, 2022). Results showed a decrease in the levels of PM2.5 and associated trace elements is observed in the impact zone (IZ) and in the control zone (CZ) throughout the study period. In the case of PM2.5, the most notable decrease occurred in the period of the start-up of the ERP, a period that coincides with the confinement and restrictions of COVID, with a subsequent increase in both zones, without reaching the levels observed in the period prior to the start-up of the ERP. Selenium is the only trace element that increases significantly in the IZ. In conclusion, a decrease is observed for all pollutants except selenium in both zones, although less pronounced in the IZ. Since selenium already showed an upward trend in the phase prior to the start of the ERP, it is necessary to investigate its evolution and find out the possible cause.

Comparative life cycle assessment of landfill sludge treatment technologies in China.

Reasonable treatment of large amounts of sludge excavated from landfills has gained increasing attention due to the diminishing availability of landfill space in China. In this study, five landfill sludge (LS) treatment technologies using life cycle assessment (LCA) and life cycle cost (LCC) were investigated, i.e., co-incineration in coal-fired power plants (CFPP) and waste incineration power plant (WIPP), co-processing in cement kiln, bricks production, and sintering ceramsite. The LCA results demonstrate that sintering ceramsite outperforms other technologies and LCC results indicate sintering ceramsite also provides the highest economic benefit ($869.94). To further enhance environmental and economic performances of the LS treatment, the substitution of coal with natural gas and biomass can reduce Energy Conservation and Emission Reduction (ECER) index by 74% and 98%, respectively. This substitution can increase economic returns by 24% and 26%, respectively. Furthermore, national-level economic benefit and carbon emission reduction potential of different LS treatment technology alternative scenarios were assessed. Results display that a combination of 50% CFPP, 25% bricks, and 25% ceramsite (biomass) offers the highest economic gain, which is 3.02 times that of 50% CFPP and 50% cement (original case). Conversely, the replacement of 25% brick with 25% cement in the above combination result in the lowest carbon reduction, which is 9.35 times that of the original case.

Effect of separation pretreatment on environmental and economic performance of sludge resource utilization.

As a new technology for accurate utilization of sludge resources, sludge inorganic-organic matter separation (IOMS) has attracted wide attention. This study examined the impact of this pretreatment on environmental and economic performance of sludge composting and incineration using life cycle assessment (LCA) and whole life costing (WLC). LCA results indicated that IOMS pretreatment reduced the energy conservation and emission reduction (ECER) values of composting and incineration by 56 % and 76 %, respectively. Meanwhile, WLC exhibited that IOMS pretreatment could cut the break-even year of incineration from 11 years to 4 years. The combination of organic sludge incineration/composting with inorganic sludge sintering ceramsite reveals excellent environmental and economic performance. The application optimization hypothesis analysis of these two routes in various provinces of China indicates that Jiangsu has the greatest development potential and should become a major promotion region.

Characterization and spatiotemporal variations of fluorescent dissolved organic matter in leachate from old landfill-derived incineration residues and incombustible waste.

Dissolved organic matter (DOM) influences the bioavailability and behavior of trace metals and other pollutants in landfill leachate. This research characterized fluorescent dissolved organic matter (FDOM) in leachate from an old landfill in Japan during a 13-month investigation. We employed excitation-emission matrix (EEM) fluorescence spectroscopy with parallel factor analysis (PARAFAC) to deconvolute the FDOM complex mixture into three fluorophores: microbial humic-like (C1), terrestrial humic-like (C2), and tryptophan-like fluorophores (C3). These FDOM components were compared with findings from other studies of leachate in landfills with different waste compositions. The correlations among EEM-PARAFAC components, dissolved organic carbon (DOC) concentration, and ultraviolet-visible and fluorescence indices were evaluated. The FDOM in leachate varied spatially among old and extended leachate collected in the landfill and leachate treatment facility. The FDOM changed temporally and decreased markedly in August 2019, November 2019, and April 2020. The strong positive correlation between HIX and %C2 (r = 0.87, ρ = 0.91, p < 0.001)) implies that HIX may indicate the relative contribution of terrestrial humic-like components in landfill leachate. The Fmax of C1, C2, and C3 and the DOC concentration showed strong correlations among each other (r > 0.72, ρ > 0.78, p < 0.001) and positive correlations with leachate level (r > 0.41, p < 0.001), suggesting the importance of hydrological effects and leachate pump operation on FDOM.

A study of the stabilization and solidification of heavy metals in co-vitrification of medical waste incineration ash and coal fly ash.

Medical waste incineration ash (MWIA) has significant concentrations of heavy metals, dioxins, and chlorine that, if handled incorrectly, might cause permanent damage to the environment and humans. The low content of calcium (Ca), silicon (Si), and aluminum (Al) is a brand-new challenge for the melting technique of MWIA. This work added coal fly ash (CFA) to explore the effect of melting on the detoxication treatment of MWIA. It was found that the produced vitrification product has a high vitreous content (98.61%) and a low potential ecological risk, with an initial ash solidification rate of 67.38%. By quantitatively assessing the morphological distribution features of heavy metals in ashes before melting and molten products, the stabilization and solidification rules of heavy metals during the melting process were investigated. This work ascertained the feasibility of co-vitrification of MWIA and CFA. In addition, the high-temperature melting and vitrification accelerated the detoxification of MWIA and the solidification of heavy metals.

Life cycle assessment of alternative pulp mill sludge treatment methods in Finland.

Proper management of wastewater treatment plant side streams in pulp and paper mills is a matter of great interest. This study evaluates the environmental impact of different strategies in the management of biosludge from pulp and paper mills in Finland through a Life Cycle Assessment methodology. The base industrial standard practice, biosludge incineration for energy recovery and ash landfill disposal (Scenario 1), was compared to the alternative process of hydrothermal carbonization. The hydrochar generated from hydrothermal carbonization was evaluated for energy recovery through incineration (Scenario 2), or for use in composting for nutrient recovery (Scenario 3). The results showed that the hydrothermal process improved the overall environmental performance of the sludge management, particularly in terms of energy consumption and greenhouse gas emissions. The use of hydrochar as a soil amendment in composting also resulted in a significant reduction on the environmental impact compared to the other two scenarios. Overall, this study highlights the potential of hydrothermal carbonization and hydrochar utilization as sustainable options for managing biosludge from pulp mills.

Strontium leaching from municipal waste subjected to incineration.

The aim of the study was to determine the content and leachability of Sr in ashes obtained through combusting municipal waste in household furnaces. The waste had been collected as a mixed stream and as separate fractions (i.e. furniture, sponges, waste paper, PCV packaging, plastic-coated paper cartons, imitation leather, rubber, textiles and polystyrene). Using single-step chemical extractions, (HCl + HNO3, H2O, 0.01 M CaCl2, 0.1 M CH3COOH), we determined the total content of Sr (TC) and proportions of the following fractions: water-leachable, phytoavailable and easily soluble and bound to carbonates. We also analyzed the effect of reducing pH in the extraction solutions on St leachability from the study material. The study showed that Sr concentration in ash generated from the combustion of conventional fuels, alternative fuels and municipal waste ranged from 114 to 1006 mg/kg. The largest amounts of Sr were found in ash generated from the combustion of alternative fuels (coal pellets 488-1006 mg/kg), conventional fuels (hard coal 430-670 mg/kg) and mixed waste (237-825 mg/kg). The most mobile fraction of Sr (water-leachable) comprised from 1.3% to nearly 91% TC; the phytoavailable fraction and the ion-exchange and carbonate-bound fraction comprised 3-92% TC and 9-72% TC, respectively. We also found that the greatest pH reductions do not always entail the greatest amounts of extracted Sr. A much more significant factor in this respect is the mineral and chemical composition of primary materials, which can buffer changes in pH. The Risk Assessment Code (RAC) values pointed to a varied environmental risk and the highest RAC values (> 70) were found for coal pellets, wood pellets, straw, rubber and plastic containers for mixed oils.