Removal of fiber post under the guidance of digital guide plate and one-piece glass fiber posts-and-cores repair: a clinical report.

This study explores the potential application of computer aided design (CAD)/computer aided manufac-turing (CAM) for one-piece glass fiber posts and cores in restoring tooth defects post-removal of a broken fiber post using a digital guide plate. This paper reports a fractured left upper incisor fiber post removed using a customized needle and digital guide plate. Following root canal retreatment, CAD/CAM integrated fiber post-core and zirconia full crown restoration were completed. The occlusion testing was conducted using the T-Scan Ⅲ system. This study offers insights for managing secondary repair after fiber post fractures.

Endodontic microsurgery and prosthodontic treatment of a permanent anterior concrescence: A case report.

Concrescence is a rare dental anomaly in which two adjacent teeth are united only by their cementum. Concrescence most frequently occurs in molars, especially a third mandibular molar and a supernumerary tooth. It is rarely seen in the maxillary anterior teeth. This case report is the first in the literature which details the successful treatment of a concrescence between the maxillary central incisor and a supernumerary tooth through multidisciplinary therapy. The treatment plan included root canal treatment, endodontic microsurgery, and prosthodontic treatment.

Radiological, histological and clinical side effects of incisor trimming in rabbits.

INTRODUCTION: Incisor malocclusion in rabbits (Oryctolagus cuniculus) is a common clinical problem seen in general practice. Given that the growth rate is about 2 mm per week, a lack of wear quickly leads to feeding difficulties and soft tissue injuries. Therefore, pathologically elongated incisors must be shortened every three to six weeks. The goal of this study was to assess the potential adverse effects on dental and periodontal tissues associated with the three most commonly used trimming methods: nail cutter, diamond-coated cutting disc and diamond burr. The left mandibular incisor of 28 healthy New Zealand rabbits was subjected to four trimmings with one of the three cutting methods. After the fattening period, the mandibles were collected and both mandibular incisors were investigated on dental radiographs, micro-computed tomography scans and histological sections. Dental and periodontal tissue changes were evaluated. This study allowed a more accurate statement of the potential short-term adverse effects of the three trimming methods. At the clinical level, the nail cutter caused the formation of an irregular occlusal surface with sharp edges. Both engine-drive methods allowed the attainment of a smooth surface but the disc was less accurate. Histological evaluation revealed that the primary modifications, including coronal fractures, periodontal ligament widening and inflammation, reparative osteodentine, paracementosis and biofilm accumulation, were found in the nail cutter group.

INTRODUCTION: La malocclusion des incisives chez le lapin (Oryctolagus cuniculus) est un problème clinique courant en médecine générale. Étant donné que le taux de croissance est d'environ 2 mm par semaine, un manque d'usure entraîne rapidement des difficultés d'alimentation et des lésions des tissus mous. Par conséquent, les incisives pathologiquement trop longues doivent être raccourcies toutes les trois à six semaines. L'objectif de cette étude était d'évaluer les effets négatifs potentiels sur les tissus dentaires et parodontaux associés aux trois méthodes de taille les plus couramment utilisées: le coupeongles, le disque de coupe diamanté et la fraise diamantée. L'incisive mandibulaire gauche de 28 lapins néo-zélandais en bonne santé a été soumise à quatre tailles avec l'une des trois méthodes de coupe. Après la période d'engraissement, les mandibules ont été prélevées et les deux incisives mandibulaires ont été examinées sur des radiographies dentaires, des examens micro-tomodensitométriques et des coupes histologiques. Les modifications des tissus dentaires et parodontaux ont été évaluées. Cette étude a permis de mieux cerner les effets indésirables potentiels à court terme des trois méthodes de coupe. Au niveau clinique, le coupe-ongles a entraîné la formation d'une surface occlusale irrégulière avec des bords tranchants. Les deux autres méthodes de taille permettent d'obtenir une surface lisse, mais le disque est moins précis. L'évaluation histologique a révélé que les modifications primaires, y compris les fractures coronaires, l'élargissement et l'inflammation du ligament parodontal, l'ostéodentine réparatrice, la paracémentose et l'accumulation de biofilm, ont été trouvées dans le groupe coupe-ongles.

Pulpotomy versus pulpectomy in carious vital pulp exposure in primary incisors: a randomized controlled trial.

BACKGROUND: Pulpotomy as a minimally invasive pulp therapy technique is the treatment of choice for carious pulp exposures, however many pediatric dentists perform pulpectomies in vital primary incisors. The aim of this split mouth randomized controlled study was to compare formocresol pulpotomy and zinc-oxide and eugenol pulpectomy in the treatment of vital pulp exposure in primary incisors. METHODS: Contralateral pairs of incisors were randomly assigned to receive pulpotomy or pulpectomy in children aging from 18 to 66 months old and were followed up for 12 months. RESULTS: 39 pairs of incisors were included. Clinical and radiographical success rates showed no statistical significant difference (p = 1, p = 0.8 respectively). Relative risk measures for clinical success rates (RR = 1.03, 95%CI 0.87 to 1.23) and for radiographic success rates (RR = 1.03, 95%CI 0.83 to 1.29) with CIs including number one showing no difference between the two groups. The Survival rate using Kaplan-Meier survival analysis score showed 82% for pulpotomy and 74% for pulpectomy at 12 months (P = 0.2). CONCLUSIONS: Both pulpotomy and pulpectomy techniques can be used successfully in the treatment of carious vital pulp exposure in primary incisors. TRIAL REGISTRATION: The trial was retrospectively registered in Clinicaltrials .gov with this identifier NCT05589025 on 21/10/2022.

Unusual approach to treat malocclusion with traumatically missing and hopeless maxillary unilateral incisors: A case report.

Orthodontic cases requiring tooth extraction sometimes involve post-traumatic incisors. For adolescent cases in which trauma causes the maxillary unilateral incisors to be missing or have poor prognoses, it is worth considering these teeth as candidates for extraction, and this unusual approach is seldom reported in the literature. An adolescent patient with a missing maxillary left lateral incisor and an ankylosed maxillary left central incisor sought treatment for dental protrusion and crowding. An unusual orthodontic approach was used, which involved the extraction of the maxillary left central incisor and mandibular first premolars. After treatment, the maxillary right central incisor was successfully translocated across the midpalatal suture and transformed into the left central incisor. Additionally, well-aligned teeth and enhanced smile aesthetics were achieved, and the treatment outcomes remained stable throughout the follow-up period.

Entire Dental Arch Mesial Movement after Extraction of Maxillary Right Central Incisor due to Root Fracture Treated with Temporary Anchorage Devices.

This case report describes a 19-year-old woman with skeletal Class I crowding and an unsalvageable maxillary right central incisor. She visited our clinic with the chief complaint of mobility of the maxillary right central incisor due to a traffic accident. After extraction of the maxillary right central incisor, the space was closed orthodontically. All the maxillary right teeth were moved mesially with an elastic chain attached to a palatal lever arm which was connected to palatal temporary anchorage devices (TADs). After orthodontic treatment had been completed, the maxillary right lateral incisor and peg-shaped left lateral incisor were restored with a porcelain laminate veneer. The maxillary right canine was morphologically reshaped and built up with composite resin. Consequently, esthetically ideal occlusion and functional lateral guidance with uncontacted molars were obtained. These results show that mesial movement of the entire dental arch with TADs is a useful orthodontic treatment option in patients in whom the maxillary central incisor has been extracted.

A Surgical Approach to Root Coverage and Correction of Mucogingival Conditions and Deformities in Mandibular Incisors with Isolated Gingival Recession: Free Mucogingival Graft. A Pilot Prospective Cohort Study.

The aim of this study was to present a periodontal plastic surgery approach to treat gingival recessions (GRs) and correct mandibular incisor mucogingival conditions and deformities. Isolated deep GRs (≥ 3 mm) in the mandibular incisors (n = 24 teeth) were treated: 66.6% of sites were recession types 2 or 3, and 58.3% of teeth were malpositioned. Recessions were treated using free mucogingival grafts (FMGs) harvested from the buccal aspect of donor teeth with altered passive eruption or healthy periodontal support, with < 3 mm between the cementoenamel junction and the buccal alveolar crest. Clinical parameters (GR, clinical attachment level, interproximal papilla tip location, keratinized tissue, vestibule depth) and root coverage esthetic score were evaluated at 9 months. FMG significantly reduced GR (P < .001) and increased keratinized tissue (P < .001) without loss of vestibule depth (P > .05). Mean root coverage was 94.37% ± 10.60%, mean residual GR was 0.08 ± 0.65 mm, and the mean root coverage esthetic score was 8.9 ± 1.24. Recession types 2/3 showed significant interproximal clinical attachment gain (P < .05). The interproximal papilla was significantly augmented at sites with papilla loss (P < .001). No clinical attachment loss (P = .346) was detected at donor sites. These results suggest that FMG is a promising root coverage approach for recession types 1, 2, and 3, correcting mucogingival conditions and deformities and reconstructing the interproximal papilla.

A retrospective analysis of the patient journey for children with an unerupted maxillary central incisor.

BACKGROUND: Maxillary central incisors (MCI) are the third most impacted teeth. Timely multidisciplinary management is indicated as unerupted incisors can cause functional- and appearance-related distress. AIM: To assess the patient journey for children with unerupted MCI, including referral, clinical assessment, surgical management and follow-up treatment, and highlight areas for improvement, as well as identify factors impacting orthodontic treatment burden (OTB). DESIGN: A retrospective service evaluation of children aged 6-16 years who had surgical management of unerupted MCI under general anaesthetic (GA) between 2018 and 2021. RESULTS: Fifty-two children with 62 unerupted MCI were identified. Mean age at referral was 8.8 years. Most children (82.7%) had supernumerary teeth in the anterior maxilla. Mean time between listing for GA and surgery increased from 4.3 to 15.2 months following the COVID-19 lockdown. Mean age at surgery was 10.4 years. Supernumerary removal and incisor exposure and bond was the most common treatment (56.6%). Most patients required hospital orthodontic treatment post-surgery (65.4%). CONCLUSION: Most children referred were below 9 years (60.1%); these children had reduced OTB compared to those who had been referred at an older age. Stage of root development was also a significant predictor in OTB. An unexpected finding was that conical supernumeraries were found to prevent MCI eruption.

Influence of differences in mandibular incisor inclination on skeletal stability after orthognathic surgery in patients with skeletal class III malocclusion.

OBJECTIVE: The preoperative inclination angle of mandibular incisors was crucial for surgical and postoperative stability while the effect of proclined mandibular incisors on skeletal stability has not been investigated. This study aimed to evaluate the effects of differences in presurgical mandibular incisor inclination on skeletal stability after orthognathic surgery in patients with skeletal Class III malocclusion. METHODS: A retrospective cohort study of 80 consecutive patients with skeletal Class III malocclusion who underwent bimaxillary orthognathic surgery was conducted. According to incisor mandibular plane angle (IMPA), patients were divided into 3 groups: retroclined inclination (IMPA < 87°), normal inclination (87° ≤ IMPA < 93°) and proclined inclination (IMPA ≥ 93°). Preoperative characteristics, surgical changes and postoperative stability were compared based on lateral cephalograms obtained 1 week before surgery (T0), 1 week after surgery (T1), and at 6 to 12 months postoperatively (T2). RESULTS: The mandible demonstrated a forward and upward relapse in all three groups. No significant differences in skeletal relapse were observed in the 3 groups of patients. However, the proclined inclination group showed a negative overbite tendency postoperatively compared with the other two groups and a clinically significant mandibular relapse pattern. Proclined IMPA both pre- and postoperatively was correlated with mandibular relapse. CONCLUSION: Sufficient presurgical mandibular incisor decompensation was of crucial importance for the maintenance of skeletal stability in patients with skeletal Class III malocclusion who subsequently underwent orthognathic surgery.

The load capacity of maxillary central incisor with simulated flared root canal restored with different fiber-reinforced composite post and cementation protocols.

Background: This study aimed to evaluate the load capacity of maxillary central incisors with simulated flared root canal restored with different fiber-reinforced composite (FRC) post cemented with either self-adhesive or self-etch resin cement and its mode of fracture. Methods: Sixty-five extracted maxillary incisors were decoronated, its canal was artificially flared and randomly categorized into group tFRC (tapered FRC post) (n = 22), mFRC (multi-FRC post) (n = 21), and DIS-FRC (direct individually shaped-FRC (DIS-FRC) post) (n = 22), which were further subdivided based on cementation resin. The posts were cemented and a standardized resin core was constructed. After thermocycling, the samples were loaded statically and the maximum load was recorded. Results: The load capacity of the maxillary central incisor was influenced by the different FRC post system and not the resin cement (p = 0.289), and no significant interaction was found between them. Group mFRC (522.9N) yielded a significantly higher load capacity compared to DIS-FRC (421.1N). Overall, a 55% favorable fracture pattern was observed, and this was not statistically significant. Conclusion: Within the limitation of the study, it can be concluded that prefabricated FRC posts outperform DIS-FRC posts in terms of the load capacity of a maxillary central incisor with a simulated flared root canal. The cementation methods whether a self-adhesive or self-etch resin cement, was not demonstrated to influence the load capacity of a maxillary central incisor with a flared root canal. There were no significant differences between the favorable and non-favorable fracture when FRC post systems were used to restored a maxillary central incisor with a flared root canal.

EAO Position Paper: Immediate Implant Placement: Managing Hard and Soft Tissue Stability from Diagnosis to Prosthetic Treatment.

In this position paper, the state of the art in immediate implant placement (IIP) at incisor-cuspid-premolar sites is described. The literature supports that the following prerequisites need to be simultaneously met for a predictable outcome: (1) there must be no acute infection; (2) there must be apical and palatal/lingual bone for implant anchorage; (3) the tooth must be inside the bone envelope; (4) the alveolar socket must have a favorable morphology (type I, IIa, IIb avoiding wide dehiscences); (5) there must be no midfacial recession; (6) the right implant must be selected; and (7) the surgeon needs to be experienced and skilled. A preoperative CBCT is required for IIP because multiple aforementioned prerequisites (2, 3, and 4) can only be assessed on the basis of 3D imaging. The final prerequisite relates to the importance of a perfect implant position, preferably leaving a horizontal gap of at least 2 mm between the implant shoulder and buccal bone wall. Guided surgery is preferred over free-hand surgery to accomplish this. Flapless surgery, socket grafting, connective tissue graft (CTG), and immediate provisionalization have been shown to contribute to hard and/or soft tissue stability. When the previously mentioned prerequisites are fulfilled, IIP may be considered over alternative treatment concepts (eg, early implant placement [EIP] and delayed implant placement [DIP]) based on time gain, minimal invasiveness, and similar outcomes in the literature. Given very strict selection criteria, clinicians should primarily screen patients for IIP before considering other treatment options with wider indications. Int J Prosthodont 2023;36:533-545.

Use of a hybrid soft tissue autograft for gingival phenotype modification lingual to mandibular incisors.

Presence of adequate dimensions of keratinized/attached gingiva (KT/AG) and gingival thickness (GT) is considered necessary to maintain optimal periodontal health and long-term stability of gingival margin. Gingival phenotype modification therapies to increase these two dimensions (GT and KT/AG) on the buccal aspect of teeth have been widely reported, but the literature on lingual gingival augmentation is scarce. The purpose of this paper is to report the outcomes of a case treated with an envelope flap combined with a hybrid soft tissue autograft (subepithelial connective tissue graft with an epithelial collar) for phenotype modification of gingiva lingual to mandibular incisors presenting with thin gingiva (<1 mm) and lack of AG in tooth # 31 and 42. At 12 months follow-up, a substantial gain in KT, AG and GT along with partial root coverage was achieved.

Clinical Guidelines for the Surgical/Orthodontic Management of Impacted Maxillary Central Incisors Based on a Decision Tree.

Maxillary central incisors are critical to occlusal function, smile esthetics, and even one's self-image. Furthermore, their impaction at an early age could have harmful psychological consequences on the individual. Maxillary central incisors can be impacted due to early dentoalveolar trauma to the upper anterior region that displaces the incisor in formation and, in rare instances, tooth germs are deformed. The aftermath of trauma during primary dentition is seen later during mixed dentition. Other causes are either an impediment in the eruption pathway of the maxillary central incisor due to the presence of odontomas or supernumerary teeth, an insufficient eruption space, or, very rarely, syndromic and/or other general medical conditions. Diagnosis is completed through a detailed medical/dental history, clinical evaluation, and appropriate imaging. Arch width increase, space opening, removal of obstructions if present, suitable soft-tissue management, well-designed orthodontic traction mechanics, and long-term periodontal follow-up are all essential elements in resolving cases of impacted maxillary central incisors.

Use of a 2-Piece Small Diameter Implant in the Esthetic Zone in a Site of Chronic Residual Periapical Lesion: A Case Report with 1-Year Follow-Up and Histopathological Examination.

BACKGROUND Replacing missing teeth in the anterior region of the jaw can be challenging due to the limited available interdental space. Improper selection or inadequate placement of a dental implant in this situation can affect the adjacent anatomical structures negatively. What if, in addition, a residual intraosseous chronic inflammatory lesion was present? The objective of this case report is to demonstrate the step-by-step surgical procedures of replacing a maxillary lateral incisor in a patient with a residual lesion with a satisfactory outcome. CASE REPORT A 63-year-old female patient with an extracted maxillary lateral incisor presented for implant placement. Radiographically, a residual periapical lesion with mild atrophy of the alveolar bone and fairly low density with sparse trabeculation was noted. Owing to the limited restorative space, a Straumann Bone Level Tapered Implant Ø2.9 mm (Small Cross-Fit connection, Roxolid, SLActive) was placed. Histopathological evaluation revealed a definitive diagnosis of periapical granuloma. After 1 year, the clinical examination revealed a successful outcome, and the patient was satisfied with the result. CONCLUSIONS This case report shows a successful clinical and radiographical outcome after 1 year of a 2-piece small diameter dental implant, the Straumann Bone Level Tapered Implant, diameter 2.9 mm, replacing a missing maxillary lateral incisor after enucleating the lesion with histopathological examination.

Combined surgical and conservative endodontic management of Oehler's type 3b dens invaginatus aided by guided tissue regeneration.

The present case describes the successful healing of a periapical lesion associated with the left maxillary lateral incisor (# 22, Federation Dentaire Internationale) having a type 3b dens invaginatus tooth morphology. The treatment was complicated by the presence of blunderbuss root apex and large periapical lesion (>10 mm) with through and through bone defect (Bucco palatal cortical bone perforation, Von Arx Type 1b). An adolescent boy reported palatal swelling and pus discharge in relation to tooth #22. A thorough clinical and radiographic examination revealed tooth #22 as having a type 3b dens invaginatus with an open apex and a diagnosis of pulp necrosis and acute apical abscess. The case was managed by non-surgical root canal treatment followed by endodontic surgery using principles of guided tissue regeneration. A 5-year recall revealed an asymptomatic functional tooth with complete healing.

Quantification of the apical palatal bone index for maxillary incisor immediate implant assessment: A retrospective cross-sectional study.

BACKGROUND: Apical palatal bone is important in immediate implant evaluation. Current consensus gives qualitative suggestions regarding it, limiting its clinical decision-making value. OBJECTIVES: To quantify the apical palatal bone dimension in maxillary incisors and reveal its quantitative correlation with other implant-related hard tissue indices to give practical advice for pre-immediate implant evaluation and design. MATERIAL AND METHODS: A retrospective analysis of immediate implant-related hard tissue indices in maxillary incisors obtained by cone beam computed tomography (CBCT) was conducted. Palatal bone thickness at the apex level (Apical-P) on the sagittal section was selected as a parameter reflecting the apical palatal bone. Its quantitative correlation with other immediate implant-related hard tissue indices was revealed. Clinical advice of pre-immediate implant assessment was given based on the quantitative classification of Apical-P and its other correlated immediate implant-related hard tissue indices. RESULTS: Apical-P positively correlated with cervical palatal bone, whole cervical buccal-palatal bone, sagittal root angle, and basal bone width indices. while negatively correlated with apical buccal bone, cervical buccal bone, and basal bone length indices. Six quantitative categories of Apical-P are proposed. Cases with Apical-P below 4 mm had an insufficient apical bone thickness to accommodate the implant placement, while Apical-P beyond 12 mm should be cautious about the severe implant inclination. Cases with Apical-P of 4-12 mm can generally achieve satisfying immediate implant outcomes via regulating the implant inclination. CONCLUSIONS: Quantification of the apical palatal bone index for maxillary incisor immediate implant assessment can be achieved, providing a quantitative guide for immediate implant placement in the maxillary incisor zone.

Comparative Stress Analysis of Custom-Made PEEK Dental Post-Cores versus Conventional Post-Cores in Incisor Restorations: A Finite Element Study.

BACKGROUND We conducted a finite element analysis to evaluate stress levels in incisor teeth restored with custom polyetheretherketone (PEEK) dental post-cores compared to conventional post-cores. MATERIAL AND METHODS Using micro-computed tomography (µCT) imaging data, a 3D model of a maxillary incisor was created. For each material type, 3D mesh models were developed via specialized software. Two post diameters, 2.5 mm and 3.5 mm, were considered. Five different post materials were examined: Unfilled polyetheretherketone (Group UP); Glass fiber-reinforced polyetheretherketone (Group GP); Carbon fiber-reinforced polyetheretherketone (Group CP); Metal (Group M); and Zirconia ceramic (Group Z). Each model underwent finite element analysis, after which the von Mises equivalent stress values were determined. RESULTS For models involving both wide and narrow diameter posts across the crown, crown cement, post cement, and dentin, PEEK posts (Group UP, GP, and CP) exhibited higher von Mises stress values than Groups Z and M. However, the reverse trend was noticed in the post model itself. In the post cement model, stress values appeared similar only for the narrow-diameter post groups. Notably, results for Groups Z and M were largely consistent with each other. CONCLUSIONS PEEK posts, which have a lower modulus of elasticity, demonstrated different stress values when contrasted with zirconia and metal posts. As the post diameter expanded, the residual dentin decreased, influencing the stress values among various materials. Further in vitro and clinical examinations are essential to comprehensively understand PEEK posts.

Alveolar bone changes in the mandibular incisors after genioplasty, a three-dimensional study.

INTRODUCTION: Functional genioplasty aims to achieve lip competence at rest and reduces lip pressure against the mandibular incisors. The purpose of this study was to describe the radiographic changes in alveolar bone of the mandibular incisors after functional genioplasty. MATERIALS AND METHODS: Cone beam CT images from 36 patients were compared between immediate (T0) and delayed postoperative period (T1). The mean time to complete the second imaging was 10.9 ± 4.7 months. Dental and bone parameters were assessed: the vestibular bone height (BH), the bone thickness (BT) with regard to the apex of the central incisor (BT2) and at equidistance between the cementoenamel junction and the dental apex (BT1). The existence of fenestrations, the apical-root resorption and the incisor-mandibular plane angle (IMPA) were also collected. RESULTS: No significant change occurred in the BH. BT was improved of a mean 47.9% and 53.6% at the BT1 level on #31 and #41, respectively (p1=0.01 and p2=0.02, respectively); and of 53.0% at the level of the apex of both mandibular central incisors (p1=0.003 on #31 and p2=0.009 on #41). No difference in the number of fenestrations was observed between T0 and T1. A significant decrease in the root length on both mandibular incisors was observed on the delayed CBCT (from 21.96 ± 1.35 to 21.68 ± 1.32 mm for #31, p=0.0007; from 22.26 ± 1.66 to 21.96 ± 1.48 mm for #41, p=0.002). Finally, the IMPA remained stable between the two examinations with a mean 106.1 ± 7.38° vs 105.8 ± 6.51° (p=0.38). CONCLUSION: Functional genioplasty favours the alveolar bone formation of the mandibular central incisors, probably by direct bone grafting, but also by the relaxation of the perioral and chin musculature.

Staged Treatment with Root Coverage Procedure Prior to Socket Shield: A Clinical Case Report.

After performing a tunneling mucogingival surgery procedure to cover generalized root recession in the anterior maxilla, a socket shield procedure was performed for immediate implant placement on a lateral incisor, leaving a root fragment coronal to the buccal bone margin with a long soft tissue attachment. This case report suggests that it is possible to achieve stable peri-implant results 30 months after the described therapy. Int J Periodontics Restorative Dent 2023;43:175-180. doi: 10.11607/prd.6238.