Effect of treatment of transverse maxillary deficiency using rapid palatal expansion on oral health-related quality of life in children: complementary results for a controlled clinical trial.

OBJECTIVE: To evaluate the effect of rapid palatal expansion (RPE) using Haas-type expanders on children's oral health-related quality of life (OHRQOL) and compare said effect with that previously reported for the use of Hyrax-type expanders. MATERIALS AND METHODS: Forty participants aged 8-10 years with transverse maxillary deficiency were treated using Haas appliances. OHRQOL was measured using the CPQ8 - 10 before RPE, during RPE (T1), at the end of RPE (T2), and 1 month after appliance removal (T3). Generalized mixed models were fitted to assess the effect of the Haas-type expander compared to previously collected data (a nontreated and a Hyrax-type expander-treated group). RESULTS: RPE with Haas-type appliances had a negative impact on overall OHRQOL at T1 and T2 (P = 0.001), and a positive impact at T3 (P = 0.001). The Haas-type expander had a significantly greater negative impact on OHRQOL than the Hyrax-type appliance during RPE. At T1, overall scores using the Haas-type expander were 1.08 times the scores using the Hyrax-type expander (i.e., 8% increase; 95% CI, 1.01-1.17; P = 0.033). Patients using the Haas appliance had 1.24 times the scores of those using Hyrax-type devices for the oral symptoms domain at T1 (i.e., 24% increase; 95% CI, 1.06-1.46; P = 0.009). CONCLUSIONS: Correction of the transverse maxillary deficiency by RPE using the Haas appliance in children 8-10 years improves OHRQOL. The Haas- and Hyrax-type devices temporarily worsen OHRQOL during treatment, however, the negative impact is less with the Hyrax-type expander than with the Haas-type expander, because it causes fewer negative oral symptoms. CLINICAL RELEVANCE: From a patient-centered perspective, the use of the Hyrax over the Haas appliance may be suggested as it causes less negative oral symptoms during use.

Efficacy of modified anterior maxillary segmental distraction osteogenesis based on 3D visualisation for the treatment of maxillary hypoplasia among adolescents with cleft lip and palate.

BACKGROUND: This study evaluates a three-dimensional (3D) visualisation design combined with customized surgical guides to assist anterior maxillary segmental distraction osteogenesis (AMSDO) in correcting maxillary hypoplasia in adolescents with cleft lip and palate (CLP), focusing on treatment outcomes, satisfaction and the validity of 3D planning. METHODS: This retrospective cohort study was conducted at a single hospital in China. Between January 2020 and December 2023, 12 adolescents with CLP with maxillary hypoplasia were included. An advanced 3D simulation was used to convey the treatment strategy to the patients and their families. A customized surgical guide and distraction osteogenesis device were designed. Cephalometric analysis evaluated AMSDO changes and long-term stability. Patient satisfaction was assessed. The Chinese version of the Child Oral Health Impact Profile was used to evaluate the children's oral health-related quality of life before and after treatment. The postoperative outcomes were compared with the planned outcomes by superimposing the actual postoperative data onto the simulated soft tissue models and calculating the linear and angular differences between them. RESULTS: One patient experienced postoperative gingivitis, yielding an 8.33% complication rate. Most patients (83.33%) were highly satisfied with the target position, with the rest content. Cephalometric analysis showed significant improvements in various indices post-traction. Quality-of-life scores significantly improved post-treatment. The discrepancies in facial soft tissue between the simulated and actual results were within clinically satisfactory ranges. CONCLUSIONS: Digitally designed surgical guides effectively treat maxillary hypoplasia in adolescents with CLP, ensuring stability, reducing complications, reducing dependency on operator experience, and enhancing satisfaction and health outcomes. Although the simulated results were clinically acceptable, it is important to inform patients of potential variations in the predicted soft tissue.

Effects of bone anchored maxillary protraction on patients with unilateral cleft lip/palate or isolated cleft palate and hypoplastic maxilla: a 6-year follow-up case control study.

OBJECTIVES: To evaluate the effects of bone-anchored maxillary protraction (BAMP) treatment and longterm stability in growing cleft lip and palate and isolated cleft palate (CLP/CP) patients with mild maxillary hypoplasia and to compare maxillary growth patterns of BAMP-treated patients to matched control CLP/CP patients. MATERIALS AND METHODS: Ten patients with CLP/CP were treated with BAMP; they were compared to the maxillary growth pattern of 10 age-matched cleft control patients with no maxillary protraction treatment, who later received surgical Le Fort I maxillary advancement after the growth period. The assessment of maxillary growth and the occlusion started at mean 8 years of age and continued until mean 18 years of age. RESULTS: The use of BAMP orthopedic traction changed the growth pattern of mild hypoplastic maxilla toward a more anterior direction and advanced the face even above the level of Le Fort lll with only a minor effect on dentoalveolar units. The correction of occlusion and facial convexity were stable in the long term. CONCLUSIONS: The using BAMP may improve the position of the maxilla relative to the anterior cranial base for the correction of mild maxillary hypoplasia in adolescent patients with CLP/CP. The achieved results are rather stable in the long term.

Evaluation of Treatment Protocols in Surgically Assisted Rapid Maxillary Expansion by Finite Element Analysis.

Background and Objectives: Transverse maxillary deficiency is an important maxillary anomaly that is very common in society and remains current in orthodontics. The maxillary expansion has been used in treatment for a long time. While maxillary expansion can be performed with rapid maxillary expansion in young adults, it is performed with surgically assisted rapid maxillary expansion (SARME) in individuals who have reached skeletal maturity. No consensus has been reached on the most successful surgical technique or the ideal appliance for treating transverse maxillary deficiency. Accordingly, we aimed to evaluate various surgical techniques and orthodontic appliances for treating transverse maxillary deficiency using the finite element method (FEM) to identify the treatment protocol that minimizes stress on the maxillary bone and teeth. Materials and Methods: On the virtual models obtained from the cone beam computed tomography of a patient, two different incisions (the pterygomaxillary junction is separated and not separated) were made and combined using three different orthodontic appliances (tooth, bone, and hybrid assisted). Then, stresses over the maxillary bone and maxillary teeth were calculated by FEM. Results: Our results showed that when the pterygomaxillary plates were separated, fewer stresses were observed on the bone and teeth. Although hybrid-supported appliances created less stress on the teeth than tooth-supported appliances and no difference was found between bone-supported appliances, it was found that hybrid-supported appliances created less stress on the bone than the other appliances. Conclusions: The separation of the pterygomaxillary junction in the SARME operation and the use of a bone-supported or hybrid-supported appliance would place less stress on the bone and teeth.

[Research progress in the treatment of maxillary transverse deficiency with combined orthodontic-orthognathic approach].

In combined orthodontic-orthognathic treatment, the maxillary palatine suture is closed in most patients with insufficient maxillary width, and bony expansion of the maxilla cannot be achieved by dental expansion or rapid palatal expansion (RPE) which causes buccal inclination of the maxillary posterior teeth leading to unstable results. Therefore, segmental LeFort Ⅰ osteotomy and surgically assisted RPE are often used in clinical practice. In recent years, with the application of implant anchorage technology, implant anchorage assisted RPE has been gradually applied in orthognathic treatment. This article reviewed the indications, contraindications, complications, efficacy and long-term stability in different treatment approaches including segmental LeFort Ⅰ osteotomy, surgically assisted RPE and implant-supported maxillary skeletal expansion.

Segmental maxillary osteotomy in cleft lip and palate patients: a stepwise planning in the orthodontic pre-surgical preparation with Invisalign.

AIM: To show the potential of Invisalign in multi-segmental Le Fort I preparation with the aid of an occlusogram-like method. METHODS: Nine patients treated with Invisalign before segmental osteotomy of the maxilla (study sample) were matched for diagnosis, surgical procedure, and complexity of orthodontic preparation with nine patients treated with fixed appliances (control sample). A superimposition technique was adapted to complement the Invisalign software to carry out an appropriate ClinCheck in segmental pre-surgical treatments. The correct pre-surgical positions of the maxillary teeth were guided with the use of virtual added curves that followed the lower arch. The number of impressions needed in both groups to reach adequate pre-surgical coordination of the segmented arches was compared. CONCLUSION: With the aid of the proposed superimposition method, during the digital simulation of presurgical movements, clear aligner therapy appears to be an effective treatment even in patients with skeletal discrepancies and craniofacial anomalies involving the need for segmental Le Fort I osteotomies. More sophisticated software will certainly be implemented in the future.

Maxillomandibular Fusion Along with Fusion of Dorsal Surface of the Tongue to the Hard Palate-A Case Report.

RATIONALE: This case report presents a rare combination of congenital anomalies in an otherwise healthy male infant born at 36 weeks. The infant was diagnosed with congenital maxillomandibular synechia, ectrodactyly, and ankyloglossia superior syndrome (ASS). PATIENT CONCERNS: Inability to open the mouth completely, feeding challenges, and a cleft palate. The infant was stabilized through successful positive pressure ventilation via a face mask at birth and enteral feeding was initiated via a feeding gastrostomy. EXAMINATION: Diagnostic tests revealed a midline palatal cleft, hypoplastic jaws, persistent metopic suture, and a bony fusion at the midline. TREATMENT: Sectioning of the bony spur along the midline and achieving a mouth opening of 2 cm post-manipulation. The patient is under follow-up, with future treatment plans including cleft palate correction at 12 months and potential frontomandibular and lower jaw advancement depending on growth trajectories. TAKEAWAY LESSONS: This case underscores the complexity of managing multiple congenital anomalies and the need for individualized treatment plans.

Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

Speech following Le Fort I Maxillary Advancement in Cleft Maxillary hypoplasia - an objective and subjective outcome analysis.

PURPOSE: To objectively evaluate the effect of maxillary advancement on speech and VPI using video-fluoroscopy (VFS), direct nasoendoscopy, and speech evaluation and subjectively assess patients and their peer's perception regarding their speech outcome. MATERIALS AND METHODS: 27 cleft patients who underwent Lefort 1 maxillary advancement were divided into 2 groups- Group A with 4-7 mm of advancement and Group B with 8-13 mm advancement. VFS in lateral view, nasoendoscopy, and speech recordings were performed pre and 6 months postoperatively. VFS assessed the relative position of velum in relation to the pharyngeal wall, speech was evaluated for changes in nasal emission, resonance, and articulation along with nasal endoscopy to assess the overall function of the velopharyngeal valve. Subjective speech evaluation was done with a Patient-Reported Outcome Measure [PROM] questionnaire. RESULTS: As per VFS, for every 1 mm maxillary advancement, the velopharyngeal gap at rest increased by 1.75 mm in group A and 1.58 mm in group B. The compensatory changes in group B were more pronounced. Post-operative VFS showed velar closure remained the same as preoperative closure in 86.7%, and worsened in 13.3% in group A whereas it remained unchanged in 66.7%, improved in 25%, and worsened in 8.3% in group B. In nasoendoscopy, the closure pattern showed no change in 86.6%, improved in 6.7%, and deteriorated in 8.3% in group A while there was no change in 83.4%, improved in 8.3%, and deteriorated in 8.3% in group B. Dental and labiodental articulation statistically improved [p < 0.05] after surgery. PROM reported 85.7% of patients with improved speech, 82.1% improved sound quality along with 89.3% improvement in articulation. CONCLUSION: The primary cause for functional impairment and poor aesthetics in cleft deformity is the maxillary hypoplasia and therefore, should be the focus during correction. The pre-operative VP status or the amount of maxillary advancement could not predict the postoperative VP status. Maxillary advancement over 10 mm did not seem to significantly affect the final VP status. Articulation improves due to increased tongue space and favorable dental segment positioning. Mild to moderate immediate post op changes in nasality improves or even reverts to their preoperative status in the majority of the cases in about six months.

Segmental Odontomaxillary Dysplasia: A Case Report and Review of the Literature.

Segmental odontomaxillary dysplasia (SOD) is a rare and unusual nonhereditary developmental disorder that affects one side of the maxilla, impacting the hard tissue, soft tissue, and dentition in the affected area. It most frequently presents with enlargement of the gingival and osseous tissue of the affected side and hypodontia of the involved quadrant. Cutaneous irregularities of the impacted area are also common. We report a case of SOD arising in the right maxilla of a three-year-old female. Our report and review of the literature highlight the clinical, radiographic, and histopathologic characteristics of SOD, as well as the management of patients and the proposed etiologies of its pathogenesis.

The Efficiency of Segmental Le Fort I Surgery in Clear Aligner Therapy of Skeletal Class III Deformity: A Pilot Study.

INTRODUCTION: The purpose of this study was to investigate the efficiency of segmental Le Fort I osteotomy in clear aligner therapy of skeletal Class III deformities and to explore whether Le Fort I segmental osteotomy was effective for maxillary incisor axis correction and reduced the duration of perioperative orthodontics. MATERIALS AND METHODS: Patients who had skeletal Class III deformities (ANB<0) treated with extraction of the maxillary first premolars, segmental Le Fort I osteotomy, and clear aligners therapy were included in this retrospective study. We measured the amount of tooth extraction space that was closed by surgery and recorded the preoperative orthodontic and total treatment duration. Lateral cephalograms were analyzed to measure changes of maxillary incisor inclination before treatment (T0), 1 week before surgery (T1), 1 week after surgery (T2), and after total orthodontic treatment (T3). Statistical analyses were performed, and the P value was set at 0.05. RESULTS: The sample was composed of 15 patients aged 19 to 30 (M=22.9) years. The average preoperative orthodontic treatment duration was 16.2±5.22 mo, with 33.5 pairs of clear aligners. The gap at the extraction site decreased from 5.42±1.57 mm to 0.80±0.62 mm on average after surgery. U1-SN and U1-NA(deg) increased sparingly with preoperative decompensation, decreased in quantity after surgery, and then slightly increased with postoperative compensation (T20.05). CONCLUSIONS: Le Fort I segmental osteotomy assisted decompensation of the upper anterior teeth and reduced the duration of preoperative orthodontics with clear aligners.

Correlation of maximal nasal septal deviation with deviation at the maxillary insertion.

PURPOSE: It is unclear if septal deviation at the insertion points to the nasal cavity is associated with the overall septal deviation. This study aimed to assess septal deviation at the cribriform plate (CP) and maxillary crest (MC) using CT scans and to see if there was any correlation with overall septal deviation. METHODS: All consecutive CT sinus scans between January 2020 and December 2021 were retrospectively reviewed. Patients were excluded if they had a history of head, nasal or facial trauma, or any previous nasal surgical procedure. Angles between the septum and MC and the septum and CP as well as maximal angle of septal deviation (MSD) were measured. RESULTS: A total of 70 scans were included in the final analysis. The mean MSD was 8.14°. The mean septal deviation was 0.89° at the CP and 2.02° at the MC. The correlation coefficient between the deviation at the CP and MSD was 0.025 and between the deviation at the MC and MSD was 0.321. CONCLUSION: Our data reveal a positive correlation between septal deviation at the floor of the nose and overall septal deviation; this was not observed at the septal deviation at the roof. This could be explained due to the inherent tilt in the cribriform plate or by earlier ossification and fixation of the septum during its development at its insertion to the roof, thereby allowing further growth and potential for deviation of the lower part of the septum and its insertion to the floor.

Alveolar morphometry in young adults with and without agenesis of the upper lateral incisor: A retrospective study.

INTRODUCTION: We aimed to compare alveolar morphometry in young adults with agenesis of the upper lateral incisor versus the side without agenesis and versus matched controls. MATERIAL AND METHODS: In this observational retrospective study, cone beam computed tomography scans were obtained of 36 upper hemiarches from young adults aged 15 to 30 years. The hemiarches were distributed into three groups: group 1: 12 upper hemiarches presenting agenesis of the upper lateral incisor; group 2: 12 upper hemiarches from the opposite side without agenesis of the upper lateral incisor (control group 1); and group 3: 12 upper hemiarches without agenesis of the upper lateral incisor matched for age and sex with respect to the affected group (control group 2). A trained and calibrated investigator performed all the alveolar measurements at two different times, including sagittal, coronal and axial slices of each hemiarch. Paired Student's t-tests, Chi-square and repeated measures ANOVA with Bonferroni correction were used, (P<0.05). RESULTS: Apical mesial evaluation of group 1 (4.22±1.19mm) was significantly lower (P<0.001) than that of groups 2 (6.72±1.17mm) and 3 (7.58±1.67mm). Apical distal evaluation also showed differences (P<0.001) among the three groups, with the dimension being smaller in group 1 with agenesis (4.53±1.14mm), followed by group 2 without agenesis (6.23±1.55mm) and the healthy control group 3 (7.73±1.71mm). CONCLUSIONS: Lateral incisor agenesis significantly reduces the alveolar dimensions of the affected area. In cases of unilateral agenesis, the unaffected side also shows sequelae, with decreased dimensions compared to cases without agenesis. This condition should be taken into account when making therapeutic decisions regarding rehabilitation with implants or canine replacement.

Three-dimensional Measurement of the Zygomatic-maxillary Complex in the Class III Malocclusion Patients with Maxillary Retrusion.

This study investigated the anatomic features of the zygomatic-maxillary complex in patients with maxillary retrusion without clefts. Individuals were grouped, and craniofacial measurements were performed for 21 individuals with skeletal Class III malocclusion with maxillary retrusion (CIII) and 48 individuals from the control group (CG). We evaluated the predetermined hard-tissue and soft-tissue points of the facial profile in each group. Independent sample t -tests were performed to determine the differences between groups (significance set at P <0.05). Multiple points on the midface, including the most posterior point on the contour of the maxillary alveolar process, lowest point of the zygomaticomaxillary suture, furthest point to the zygomatic self-base plane, superior point in the infraorbital foramen, and lowest point of the inferior margin of the orbit to the coronal plane were smaller in CIII than in CG (all P <0.05). The soft tissue thickness in these regions was significantly increased compared with that in the normal group. In summary, for class III malocclusion patients with maxillary retrusion, the deficiency in the midface gradually decreased going upward, with the deficiency at the maxillary alveolar level being the most serious. To some extent, soft tissues compensate for the deficiencies in the facial skeleton, and standard Le Fort I osteotomy advancement was sufficient to achieve a harmonious appearance.

Prevalence and Distribution of Dental Anomalies in Schoolchildren in Kuwait.

OBJECTIVE: Dental anomalies (DA) can affect paediatric patients' aesthetics, function, and psychological well-being. There is a lack of data about the prevalence of DA in children in Kuwait. This study aimed to investigate the prevalence and distribution of DA amongst schoolchildren aged 8 to 12 years. METHODS: A retrospective study was conducted using panoramic digital radiographs of children who attended a single dental center. All radiographs were evaluated by 2 calibrated and trained examiners. RESULTS: DA were present in 110 (20.1%) out of the 546 panoramic radiographs examined: 53.6% in females and 46.4% in males. The mean age of children with DA (9.83 ± 1.29) was similar to that of children with no anomalies (9.96 ± 1.46). The most prevalent anomaly was dental agenesis (9.3%), followed by taurodontism (6.6%) and ectopic eruption (EE, 2%). DA were more common in the maxilla (58.2%) compared to the mandible (41.8%, P = .042). Congenitally missing teeth were significantly more frequent in the mandible (56.9%) than in the maxilla (43.1%, P = .003). EE was significantly more common in the maxilla (90.9%) than in the mandible (9.1%, P = .024). Microdontia and root dilacerations were only present in males, whilst supernumerary teeth, transposition, and impacted teeth were noted in females only. CONCLUSIONS: The prevalence of DA amongst schoolchildren in Kuwait was considered to be relatively high. Certain DA were associated with gender. The significant prevalence of DA highlights the need for early diagnosis using panoramic radiographs, particularly during the ages of 9 and 10, in order to ensure effective patient management.

Evaluation of transpalatal distraction in cleft palate patients.

PURPOSE: The aim of this study was to evaluate the effect of combining a bone-borne palatal expander (distractor) with a maxillary osteotomy in the treatment of narrowed maxillae in treated cleft palate patients. Few articles in the literature isolated the effects of transpalatal distraction in cleft patients and most either excluded cleft patients or grouped them with non-cleft patients. The hypothesis is that the use of a bone-borne palatal expander in conjunction with a maxillary osteotomy would improve the amount of maxillary expansion at the anterior segment with less tipping of the segments and provide a harmonious arch form. METHODS: We studied four patients above 14 years of age with repaired cleft palate and progressive anterior constriction of the arch. All patients received a bone-borne distractor (UNI-Smile Distractor, Titamed, Belgium) combined with a LeFort I level osteotomy without pterygomaxillary disjunction. Dental models and CBCT measurements were used to analyze the skeletal and dental effects of the intervention. RESULT: All the patients who completed the trial had satisfactory expansion and normalization of the maxillary arch form. The average increase in the intercanine distance was 12.9 mm while the average increase in the intermolar distance was 7.2 mm. No significant change in molar inclination or buccal bone thickness was observed. CONCLUSION: The use of bone-borne palatal expanders aided by a maxillary osteotomy (transpalatal distraction) in treated cleft palate patients can provide a harmonious arch form in adolescent and adult patients. This trial was registered in the clinical trials registry with the ID NCT03837652 on February 12, 2019.