Antibacterial activity of Hungarian varietal honeys against respiratory pathogens as a function of storage time.

Today, antibiotic therapies that previously worked well against certain bacteria due to their natural sensitivity, are becoming less effective. Honey has been proven to inhibit the biofilm formation of some respiratory bacteria, however few data are available on how the storage time affects the antibacterial effect. The activity of black locust, goldenrod, linden and sunflower honeys from three consecutive years (2020, 2021, 2022) was analyzed in 2022 against Gram-negative (Haemophilus influenzae, H. parainfluenzae, Pseudomonas aeruginosa) and Gram-positive (Streptococcus pneumoniae) bacteria using in vitro microbiological methods. After determining the physicochemical parameters of honey, broth microdilution was applied to determine the minimum inhibitory concentration of each honey type against each bacterium, and crystal violet assay was used to test their antibiofilm effect. The possible mechanism of action was explored with membrane degradation test, while structural changes were illustrated with scanning electron microscopy. Honeys stored for one or two years were darker than fresh honeys, while older honeys had significantly lower antibacterial activity. The most remarkable inhibitory effect was exerted by linden and sunflower honeys, and P. aeruginosa proved to be the most resistant bacterium. Based on our results, honey intended for medicinal purposes should be used as fresh as possible during a treatment.

Benchtop NMR Coupled with Chemometrics: A Workflow for Unveiling Hidden Drug Ingredients in Honey-Based Supplements.

Recently, benchtop nuclear magnetic resonance (NMR) spectrometers utilizing permanent magnets have emerged as versatile tools with applications across various fields, including food and pharmaceuticals. Their efficacy is further enhanced when coupled with chemometric methods. This study presents an innovative approach to leveraging a compact benchtop NMR spectrometer coupled with chemometrics for screening honey-based food supplements adulterated with active pharmaceutical ingredients. Initially, fifty samples seized by French customs were analyzed using a 60 MHz benchtop spectrometer. The investigation unveiled the presence of tadalafil in 37 samples, sildenafil in 5 samples, and a combination of flibanserin with tadalafil in 1 sample. After conducting comprehensive qualitative and quantitative characterization of the samples, we propose a chemometric workflow to provide an efficient screening of honey samples using the NMR dataset. This pipeline, utilizing partial least squares discriminant analysis (PLS-DA) models, enables the classification of samples as either adulterated or non-adulterated, as well as the identification of the presence of tadalafil or sildenafil. Additionally, PLS regression models are employed to predict the quantitative content of these adulterants. Through blind analysis, this workflow allows for the detection and quantification of adulterants in these honey supplements.

Stingless bee honey: Nutritional, physicochemical, phytochemical and antibacterial validation properties against wound bacterial isolates.

With the rise of AMR the management of wound infections are becoming a big challenge. This has been attributed to the fact that most wound bacterial isolates have been found to possess various virulence factors like enzymes, toxins & biofilms production. Therefore, need for discovery of new lead compounds is paramount as such factors make these microbes to be resistant to already existing arsenal of antibiotics or even the immune system. This study aimed at documenting the nutritional, physicochemical, phytochemical and antibacterial properties of stingless bee honey. Isolation and characterization of bacterial isolates from 34 samples obtained from wounds of outpatients and surgical wards of Nakuru County Referral Hospital, Kenya was done. Various bacterial isolates (43) were isolated Staphylococcus aureus (34.8%) being predominant, followed by Pseudomonas aeruginosa (27.9%), Klebsiella pneumoniae (23.3%) and Escherichia coli (14.0%). A total of 36 out of the total isolates were genotypically characterized using molecular techniques detecting the prevalence of the following virulence genes; 16 srRNA (756 bp), hla (229 bp), cnf1 (426 bp), cnf2 (543 bp), hlyA (1011 bp), rmpA (461 bp), lasL (600 bp), gyrB (411 bp), khe (77 bp) and magA (128 bp). An assessment of the in vitro antibacterial activity of 26 stingless bee honey samples collected from their cerumen egg-shaped pots in Marigat sub-County, Baringo County, Kenya was done. Antibacterial properties of the stingless bee honey was done with varying susceptibility patterns being observed at different concentrations of honey impregnated discs (10x104, 20x104, 50x104 and 75x104 ml µg/ ml) giving mean inhibition diameters of 18.23 ± 0.4 mm (Staphylococcus aureus), 17.49 ± 0.3 mm (Pseudomonas aeruginosa), 16.05 ± 0.6 mm (Klebsiella pneumoniae) and 10.19 ± 0.5 mm (Escherichia coli) with a mean range of 14.54 ± 2.0 mm to 17.58 ± 3 mm. Higher susceptibility to honey was recorded across all the bacterial isolates compared to conventional antibiotics while the mean MIC and MBC of the honey were recorded at 62.5 ml µg/ ml and 250 ml µg/ ml respectively. Control bacterial isolates Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, Klebsiella pneumoniae ATCC 27736 and Pseudomonas aeruginosa ATCC 27858 were used in the analysis. The stingless bee honey was found to be rich in various nutritive components like sugar (89.85 ± 5.07 g/100 g) and moisture (81.75 ± 10.35 mg/g) with a significant difference of P <0.05 as the main antibacterial components. Additionally, the stingless honey did possess water soluble vitamins, proteins and minerals of which potassium was the most dominant one. In regard to phytochemicals, on our preliminary analysis phenolic, flavonoid and carotenoid compounds were found to be present with phenolic compounds being the most dominant one. Stingless bee honey from Marigat, has antimicrobial properties which could be attributed to the rich phytochemicals it possesses and its physicochemical properties in addition to its high nutritive value.

Classification of buckwheat honey produced in Kazakhstan according to their biochemical ingredients and bioactivities by chemometric approach.

Herein, nineteen buckwheat honey samples collected from 19 stations of different ecological zones of Kazakhstan were analysed for their pollen density, physicochemical properties, chemical composition, antioxidant, anticholinesterase, tyrosinase inhibitory, and urease inhibitory activities with chemometric approaches. Twelve phenolic compounds and fumaric acid were identified using HPLC-DAD, and mainly fumaric, p-hydroxybenzoic, p-coumaric, trans-2-hydroxy cinnamic acids, and chrysin were detected in all samples. The honey samples collected from the Northern zone exhibited best antioxidant activity in lipid peroxidation inhibitory (IC50:8.65 ± 0.50 mg/mL), DPPH• (IC50:17.07 ± 1.49 mg/mL), ABTS•+ (IC50:8.90 ± 0.65 mg/mL), CUPRAC (A0.50:7.51 ± 0.30 mg/mL) and metal chelating assay (IC50:10.39 ± 0.71 mg/mL). In contrast, South-eastern zone samples indicated better acetylcholinesterase (55.57 ± 0.83%), butyrylcholinesterase (49.59 ± 1.09%), tyrosinase (44.40 ± 1.21%), and moderate urease (24.57 ± 0.33%) inhibitory activities at 20 mg/mL. The chemometric classification of nineteen buckwheat honey was performed using PCA and HCA techniques. Both were supported by correlation analysis. Thirteen compounds contributed significantly to the clustering of buckwheat honey based on geographical origin.

Silver nanopopcorns decorated on flexible membrane for SERS detection of nitrofurazone.

The synthesis of three-dimensional silver nanopopcorns (Ag NPCs) onto a flexible polycarbonate membrane (PCM) for the detection of nitrofurazone (NFZ) on the fish surface by surface-enhanced Raman spectroscopy (SERS) is presented. The proposed flexible Ag-NPCs/PCM SERS substrate exhibits significant Raman signal intensity enhancement with the measured enhancement factor of 2.36 × 106. This is primarily attributed to the hotspots created on Ag NPCs, including numerous nanoscale protrusions and internal crevices distributed across the surface of Ag NPCs. The detection of NFZ by this flexible SERS substrate demonstrates a low limit of detection (LOD) of 3.7 × 10-9 M and uniform and reproducible Raman signal intensities with a relative standard deviation below 8.34%. It also exhibits excellent stability, retaining 70% of its efficacy even after 10 days of storage. Notably, the practical detection of NFZ in tap water, honey water, and fish surfaces achieves LOD values of 1.35 × 10-8 M, 5.76 × 10-7 M, and 3.61 × 10-8 M, respectively,  which highlights its effectiveness across different sample types. The developed Ag-NPCs/PCM SERS substrate presents promising potential for sensitive SERS detection of toxic substances in real-world samples.

Droplet Digital RT-PCR (dd RT-PCR) Detection of SARS-CoV-2 in Honey Bees and Honey Collected in Apiaries across the Campania Region.

Coronaviruses (CoVs), a subfamily of Orthocoronavirinae, are viruses that sometimes present a zoonotic character. Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) is responsible for the recent outbreak of COVID-19, which, since its outbreak in 2019, has caused about 774,593,066 confirmed cases and 7,028,881 deaths. Aereosols are the main route of transmission among people; however, viral droplets can contaminate surfaces and fomites as well as particulate matter (PM) in suspensions of natural and human origin. Honey bees are well known bioindicators of the presence of pollutants and PMs in the environment as they can collect a great variety of substances during their foraging activities. The aim of this study was to evaluate the possible role of honey bees as bioindicators of the prevalence SARS-CoV-2. In this regard, 91 samples of honey bees and 6 of honey were collected from different apiaries of Campania region (Southern Italy) in four time periods from September 2020 to June 2022 and were analyzed with Droplet Digital RT-PCR for SARS-CoV-2 target genes Orf1b and N. The screening revealed the presence of SARS-CoV-2 in 12/91 in honey bee samples and in 2/6 honey samples. These results suggest that honey bees could also be used as indicators of outbreaks of airborne pathogens such as SARS-CoV-2.

A Ce2MgMoO6 double perovskite decorated on a functionalized carbon nanofiber nanocomposite for quantification of ciprofloxacin in milk and honey samples: Density functional theory interpretation.

In this study, a novel Ce2MgMoO6/CNFs (cerium magnesium molybdite double perovskite decorated on carbon nanofibers) nanocomposite was developed for selective and ultra-sensitive detection of ciprofloxacin (CFX). Physical characterization and analytical techniques were used to explore the morphology, structure, and electrocatalytic characteristics of the Ce2MgMoO6/CNFs nanocomposite. The sensor has a wide linear range (0.005-7.71 µM and 9.75-77.71 µM), a low limit of detection (0.012 µM), high sensitivity (0.807 µA µM-1 cm-2 nM), remarkable repeatability, and an appreciable storage stability. Here, we used density functional theory to investigate CFX and oxidized CFX as well as the locations of the energy levels and electron transfer sites. Furthermore, the Ce2MgMoO6/CNFs-modified electrode was successfully tested in food samples (milk and honey), indicating an acceptable response with a recovery percentage and relative standard deviation of less than 4%, which is comparable to that of GC-MS. Finally, the developed sensor exhibited high selectivity and stability for CFX detection.

Long-term stability and the physical and chemical factors predictive for antimicrobial activity in Australian honey.

The growing burden of expired medicines contributes to environmental contamination and landfill waste accumulation. Medicinal honey, with its non-toxic nature and potentially long shelf-life, represents a promising and underutilised therapeutic that avoids some of these issues. However, limited knowledge on how its antimicrobial properties change over time combined with a lack of reliable processes in the honey industry for measuring antimicrobial potential, hinder its clinical adoption. Using a diverse selection of 30 Australian honey samples collected between 2005 and 2007, we comprehensively evaluated their antibacterial and antifungal activity and pertinent physical and chemical properties with the aims of assessing the effect of long-term storage on activity, pinpointing factors associated with antimicrobial efficacy, and establishing robust assessment methods. Minimum inhibitory concentration (MIC) assays proved superior to the standard phenol equivalence assay in capturing the full range of antimicrobial activity present in honey. Correlations between activity and a range of physical and chemical properties uncovered significant associations, with hydrogen peroxide, antioxidant content, and water activity emerging as key indicators in non-Leptospermum honey. However, the complex nature and the diverse composition of honey samples precludes the use of high-throughput chemical tests for accurately assessing this activity, and direct assessment using live microorganisms remains the most economical and reliable method. We provide recommendations for different methods of assaying various honey properties, taking into account their accuracy along with technical difficulty and safety considerations. All Leptospermum and fourteen of seventeen non-Leptospermum honey samples retained at least some antimicrobial properties after 15-17 years of storage, suggesting that honey can remain active for extended periods. Overall, the results of this study will help industry meet the growing demand for high-quality, medicinally active honey while ensuring accurate assessment of its antimicrobial potential.

Effect of various supplements on productive performance of honey bees, in the south Wollo Zone, Ethiopia.

The productivity and well-being of honey bee colonies are greatly influenced by the nutrients present in the hives. A study was conducted to evaluate different supplemental feeds on honey bee productive performance during dearth periods. Thirty colonies were grouped into five (four treatment groups and one control group) and each group contained three sub-groups (2 weak, 2 strong, and 2 very strong). Control groups were not given any supplementation. Treatment diets were T1 (50% sugar syrup + 14% roasted barley powder (beso) + 36% roasted spiced pea powder (Shiro)), T2 (50% powder sugar + 14% white sorghum powder + 36% bakery yeast, T3 (50% powder sugar + 14% white sorghum powder + 36% skimmed milk powder), T4 (50% sugar syrup with infusion of stinging nettle and 1% kerefa + 50% white sorghum powder). Feed was given on the entrance sides. The performance of experimental colonies was measured every 21 days in two phases during the dry season (from 3_2_2021 to 27_4_2021) and the rainy season (from 28-7_2021 to 1_10_2021). Feed intake, space (cm2) of pollen, nectar, and honey in the comb were measured using a frame-sized transparent grid meter. The study revealed significant differences (p<0.0001) in all measured parameters among the various treatments. The diet provided by T4 showed the highest levels of crude protein (18.15%) and carbohydrates (92.15%), whereas the diet presented by T3 had the lowest crude protein content (6.66%) and the diet offered by T1 had the lowest carbohydrate content (61.91%). In general, colonies that received T4 showcased superior performance compared to others. They exhibited a feed intake of 98.3%, a nectar area of 54.3 cm2, a pollen area of 68.7 cm2, a honey area of 311.2 cm2, and a honey yield of 7 kg. Consequently, their net profit amounted to 51.54 USD. On the other hand, the colonies that received T1 had the lowest performance indicators. They demonstrated a feed intake of only 54.7%, a nectar area of 37.6 cm2, a pollen area of 48.8 cm2, a honey area of 254.3 cm2, a honey yield of 2.8 kg, and a net profit of 18.81 USD. The significance of this study was to enable the beekeepers in realizing the effects of feed supplements on the productivity and profitability of honeybee colonies.

Electrical impedance spectroscopy for potassium content analysis and botanical origin identification of honey.

Minerals are reported to dominate the electrical properties of honey and indicate its botanical and geographical origins. In this study, Electrochemical Impedance Spectroscopy (EIS) was used to assess the relation between mineral elements, electrical properties and botanical origin using three honey varieties - Citrus sp., Eucalyptus sp., and Erica sp. These varieties are identified through pollen analysis and market labelling. Flame atomic absorption and emission spectroscopies were used to quantify the concentrations of eight elements (potassium, sodium, calcium, magnesium, manganese, zinc, copper, and iron). Among all the mineral elements, potassium showed a consistent correlation with impedance. The potassium estimation in honey and standard solutions (calibration curve) had similar sensitivities of 153.43 nF/mM and 132.68 nF/mM, respectively. Additionally, the analysis revealed that potassium dominates the mineral composition, with the other species present in minimal quantities. The EIS technique showed high sensitivity to potassium and other ionisable species, making it possible to classify the botanical origin of these three honey types. The EIS technique proved to be both time and cost effective, yielding a classification rate higher than that achieved by analysing mineral composition.

Development of a LC-QTOF-MS based dilute-and-shoot approach for the botanical discrimination of honeys.

Honeys of particular botanical origins can be associated with premium market prices, a trait which also makes them susceptible to fraud. Currently available authenticity testing methods for botanical classification of honeys are either time-consuming or only target a few "known" types of markers. Simple and effective methods are therefore needed to monitor and guarantee the authenticity of honey. In this study, a 'dilute-and-shoot' approach using liquid chromatography (LC) coupled to quadrupole time-of-flight-mass spectrometry (QTOF-MS) was applied to the non-targeted fingerprinting of honeys of different floral origin (buckwheat, clover and blueberry). This work investigated for the first time the impact of different instrumental conditions such as the column type, the mobile phase composition, the chromatographic gradient, and the MS fragmentor voltage (in-source collision-induced dissociation) on the botanical classification of honeys as well as the data quality. Results indicated that the data sets obtained for the various LC-QTOF-MS conditions tested were all suitable to discriminate the three honeys of different floral origin regardless of the mathematical model applied (random forest, partial least squares-discriminant analysis, soft independent modelling by class analogy and linear discriminant analysis). The present study investigated different LC-QTOF-MS conditions in a "dilute and shoot" method for honey analysis, in order to establish a relatively fast, simple and reliable analytical method to record the chemical fingerprints of honey. This approach is suitable for marker discovery and will be used for the future development of advanced predictive models for honey botanical origin.

Physicochemical and antioxidant properties of Apis cerana honey from Lombok and Bali Islands.

Limited honey production worldwide leads to higher market prices, thus making it prone to adulteration. Therefore, regular physicochemical analysis is imperative for ensuring authenticity and safety. This study describes the physicochemical and antioxidant properties of Apis cerana honey sourced from the islands of Lombok and Bali, showing their unique regional traits. A comparative analysis was conducted on honey samples from Lombok and Bali as well as honey variety from Malaysia. Moisture content was found slightly above 20% in raw honey samples from Lombok and Bali, adhering to the national standard (SNI 8664:2018) of not exceeding 22%. Both honey types displayed pH values within the acceptable range (3.40-6.10), ensuring favorable conditions for long-term storage. However, Lombok honey exhibited higher free acidity (78.5±2.14 meq/kg) than Bali honey (76.0±1.14 meq/kg), surpassing Codex Alimentarius recommendations (≤50 meq/kg). The ash content, reflective of inorganic mineral composition, was notably lower in Lombok (0.21±0.02 g/100) and Bali honey (0.14±0.01 g/100) compared to Tualang honey (1.3±0.02 g/100). Electric conductivity, indicative of mineral content, revealed Lombok and Bali honey with lower but comparable values than Tualang honey. Hydroxymethylfurfural (HMF) concentrations in Lombok (14.4±0.11 mg/kg) and Bali (17.6±0.25 mg/kg) were slightly elevated compared to Tualang honey (6.4±0.11 mg/kg), suggesting potential processing-related changes. Sugar analysis revealed Lombok honey with the highest sucrose content (2.39±0.01g/100g) and Bali honey with the highest total sugar content (75.21±0.11 g/100g). Both honeys exhibited lower glucose than fructose content, aligning with Codex Alimentarius guidelines. The phenolic content, flavonoids, and antioxidant activity were significantly higher in Lombok and Bali honey compared to Tualang honey, suggesting potential health benefits. Further analysis by LC-MS/MS-QTOF targeted analysis identified various flavonoids/flavanols and polyphenolic/phenolic acid compounds in Lombok and Bali honey. The study marks the importance of characterizing the unique composition of honey from different regions, ensuring quality and authenticity in the honey industry.

Speciation analysis of arsenic in honey using HPLC-ICP-MS and health risk assessment of water-soluble arsenic.

It is well known that arsenic is one of the most toxic elements. However, measuring total arsenic content is not enough, as it occurs in various forms that vary in toxicity. Since honey can be used as a bioindicator of environmental pollution, in the present study the concentration of arsenic and its species (As(III), As(V), DMA, MMA and AsB) was determined in honey samples from mostly Poland and Ukraine using HPLC-ICP-MS hyphenated technique. The accuracy of proposed methods of sample preparation and analysis was validated by analyzing certified reference materials. Arsenic concentration in honey samples ranged from 0.12 to 13 µg kg-1, with mean value of 2.3 µg kg-1. Inorganic arsenic forms, which are more toxic, dominated in honey samples, with Polish honey having the biggest mean percentage of inorganic arsenic species, and Ukrainian honey having the lowest. Furthermore, health risks resulting from the consumption of arsenic via honey were assessed. All Target Hazard Quotient (THQ) values, for total water-soluble arsenic and for each form, were below 1, and all Carcinogenic Risk (CR) values were below 10-4, which indicates no potential health risks associated with consumption of arsenic via honey at average or recommended levels.

Rapid Apta-Chromogenic Detection Method for Nitrofuran Metabolite Determination.

Nitrofuran (NF) contamination in food products is a global problem resulting in the banned utilization and importation of nitrofuran contaminated products. A novel chromogenic detection method using a specific DNA aptamer with high affinity and specificity to nitrofurans was developed. Single-stranded DNA aptamers specific to nitrofuran metabolites, including 3-amino-2-oxazolidinone (AOZ), 3-amino-5-methylmorpholino-2-oxazolidinone (AMOZ), and 1-aminohydantoin (AHD), were isolated using magnetic bead-SELEX. The colorimetric detection of nitrofurans using gold nanoparticles (AuNPs) exhibited an AOZ detection range of 0.01-0.06 ppb with a limit of detection (LOD) of 0.03 ppb. At the same time, this system could detect AMOZ and AHD at a range of 0.06 ppb and 10 ppb, respectively. The fast nitrofuran extraction method was optimized for food, such as fish tissues and honey, adjusted to be completed within 3-6 h. This novel apta-chromogenic detection method could detect NF metabolites with a sensitivity below the minimum required performance limit (MPRL). This analysis will be valuable for screening, with a shortened time of detection for aquaculture products such as shrimp and fish muscle tissues.

Changes in health-promoting metabolites associated with high-altitude adaptation in honey.

The levels of metabolites in honey are influenced by floral origin, production region, and bee species. However, how environmental factors affect honey quality remains unclear. Based on untargeted metabolomics and using UPLC Q-Orbitrap MS, we analyzed 3596 metabolites in 51 honey samples from Yunnan and Shennongjia. Comparative analysis revealed that geniposidic acid, kynurenic acid and caffieine accumulated at significantly different levels between Shennongjia and Yunnan honey. Based on cluster structure analysis, 36 Yunnan honey samples were divided into two distinct groups by altitude. Notably, quercetin, hyperoside, taxifolin, rutin, tryptophan, astragalin and phenylalanine were higher levels in high-altitude honey (>1700 m), whereas abscisic acid was higher levels in low-altitude honey (≤1700 m). Among these, significantly elevated levels of hyperoside, taxfolin, astragalin, and tryptophan were observed in honey collected from high-altitude areas in Shennongjia. Our findings highlight the effect of altitude on honey health-promoting components, providing valuable insights into honey quality.

Dynamic variation in the aroma characteristics of Rhus chinensis honey at different stages after capping.

The ripening characteristics after capping of honey are favourable for improving its quality. However, research on the variation and formation of aroma characteristics of honey in this process is lacking. Therefore, the present study was carried out with different stages of Rhus chinensis honeys (RCHs) after capping and identified 192 volatiles with varying levels of concentration. "Fruity" was the main aroma characteristic of RCHs at different stages after capping, mainly contributed by (E)-ß-damascenone. Methyl salicylate might be a potential indicator for differentiating RCHs at different stages after capping. The metabolic pathway analyses revealed that the aroma compounds in RCHs undergo transformation at different stages after capping, which subsequently affects its aroma characteristics formation. This work is the first to study the dynamic changes in honey aroma characteristics after capping from multiple perspectives, and the results are of great significance for understanding the aroma characteristics after capping and quality control of honey.

Exploring the Formation of Chemical Markers in Chaste Honey by Comparative Metabolomics: From Nectar to Mature Honey.

Identification of chemical markers is important to ensure the authenticity of monofloral honey; however, the formation of chemical markers in honey has received little attention. Herein, using comparative metabolomics, we first identified chemical markers in chaste honey and then explored their formation and accumulation from nectar to mature honey. We identified agnuside and p-hydroxybenzoic acid glucosides as chemical markers for chaste honey. Besides, we developed an UHPLC-MS/MS method for quantifying these markers and found that their levels varied significantly across sample sources. We compared the presence of these compounds in chaste nectar and mature honey. The outcomes underscore that these characteristic compounds are not simply delivered from nectar to mature honey, and activities of honeybees (collecting and processing) play a pivotal role in their formation and accumulation. These observations shed light on how mature honey can form its unique qualities with a rich assortment of natural bioactive compounds, potentially supporting health benefits.

Sugar detection in adulterated honey using hyper-spectral imaging with stacking generalization method.

This paper develops a new hybrid, automated, and non-invasive approach by combining hyper-spectral imaging, Savitzky-Golay (SG) Filter, Principal Components Analysis (PCA), Machine Learning (ML) classifiers/regressors, and stacking generalization methods to detect sugar in honey. First, the 32 different sugar concentration levels in honey were predicted using various ML regressors. Second, the six ranges of sugar were classified using various classifiers. Third, the 11 types of honey and 100% sugar were classified using classifiers. The stacking model (STM) obtained R2: 0.999, RMSE: 0.493 ml (v/v), RPD: 40.2, a 10-fold average R2: 0.996 and RMSE: 1.27 ml (v/v) for predicting 32 sugar concentrations. The STM achieved a Matthews Correlation Coefficient (MCC) of 99.7% and a Kappa score of 99.7%, a 10-fold average MCC of 98.9% and a Kappa score of 98.9% for classifying the six sugar ranges and 12 categories of honey types and a sugar.

Synthesis of N-doped and P-doped silicon quantum dots and their applications for tetracycline detection in the honey samples and antibacterial properties.

The abuse of tetracycline can lead to its residue in animal derived foods, posing many potential hazards to human health. Therefore, rapid and accurate detection of tetracycline is an important means to ensure food safety. Nitrogen doped and phosphorus doped silicon quantum dots (N-SiQDs, P-SiQDs) with remarkable optical stability were fabricated via a one-pot hydrothermal procedure in this study. Upon the excitation at 346 nm, N-SiQDs and P-SiQDs emitted fluorescence at 431 nm and 505 nm, respectively. Two SiQDs had the potential to serve as a probe for detecting low concentrations of tetracycline (TC), employing a mechanism of the static quenching effect. The calibration curves of N-SiQDs and P-SiQDs were linear within the range of 0-0.8 µM and 0-0.4 µM, the limits of detection were low as 5.35 × 10-4 µmol/L and 6.90 × 10-3 µmol/L, respectively. This method could be used successfully to detect TC in honey samples. Moreover, the remarkable antibacterial efficacy of two SiQDs could be attributed to the generation of a large number of intracellular reactive oxygen species. The SEM images showed that the structure of bacterial cell was disrupted and the surface became irregular when treated with both SiQDs. These properties enabled potential usage of SiQDs as excellent antibacterial material for different biomedical applications.