Evaluating malocclusion patterns in children with autism spectrum disorder using the index of complexity, outcome and need: a cross-sectional study.

BACKGROUND: The purpose of this study was to evaluate the complexity of malocclusion and existing patterns in children with autism spectrum disorders (ASD) using the index of complexity, outcome and need (ICON). METHODS: This cross-sectional study included children diagnosed with ASD, aged 9-15 years. A group of healthy children with the same demographic characteristics was randomly selected as the control group. Malocclusion was assessed according to ICON scoring protocol. The following parameters were recorded: dental aesthetics, upper arch crowding/spacing, presence of crossbite, anterior-vertical relationship (open and deep bite) and buccal segment anterior-posterior relationship. Finally, an overall ICON score was derived and reported for each patient. Descriptive analysis was performed for all investigated variables. Significance level was set at p < 0.05. RESULTS: A total of 324 children, divided into ASD (162) and control (162) groups, comprised the study population. Our results demonstrated that the average overall ICON score was significantly higher in the ASD group compared to the control group (38.77 vs. 27.43, p < 0.001). ASD children also obtained significantly higher scores regarding the dental aesthetics component (3.84 vs 2.78, p < 0.001). Study groups were significantly different in terms of the prevalence of incisor overbite and open bite (p = 0.002 and p < 0.001, respectively). Patients in the ASD group showed a higher prevalence of Class II and Class III malocclusions (p < 0.001). CONCLUSION: ASD children obtained significantly higher overall ICON scores, indicating more complex and severe malocclusions. These children also exhibited a greater tendency towards Class II and III malocclusions.

A comprehensive national survey on malocclusion prevalence among Palestinian children.

BACKGROUND: This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine. METHODS: A stratified cluster sample of 1278 schoolchildren (620 males, 658 females, mean age 12 years and 5 months (± 0.5)) were examined. Candidates who had not received any previous orthodontic treatment were only included. Dental anomalies like missing and ectopic teeth were recorded. The anteroposterior occlusal relationship was assessed based on Angle classification. Overjet and overbite were measured. Crowding and spacing were recorded subjectively. In addition, crossbite, openbite, and midline displacement were recorded. The chi-square test and descriptive analysis were used statistically. RESULTS: The study found Angle Class I molar relationship in 65%, Class II div 1 in 17%, Class II div 2 in 6%, and Class III in 12% of the sample. An overjet (OJ) of more than 4 mm was present in 17%, and 4% had OJ of more than 6 mm; an OJ of at least 0 mm or less in 36%, and 6% had a reverse OJ. A normal overbite was observed in 53%, while 28% had an increase and 19% had a decreased overbite. An anterior openbite (AOB) was present in 9%, and a scissor bite or anterior crossbite in 6% and 14%, respectively. A posterior crossbite was observed in 12% (9% unilateral and 3% bilateral). Midline displacement was found in (9%). Crowding was observed in 35% and 31% and spacing in 24% and 15% of the maxillary and mandibular arches, respectively. A statistically significant relationship between gender and midline shift, a diastema, spacing in the upper arch, and most dental anomalies was found; males were more affected (p < 0.05). CONCLUSION: This study reported a high prevalence of malocclusion among schoolchildren in Palestine. A collaborative effort should be directed to obtain more monitoring and surveillance of malocclusion more frequently to prevent and control the exacerbation of the problem.

Craniomandibular transverse tomographic evaluation after anterior open bite orthodontic treatment with miniplates anchorage.

BACKGROUND: Skeletal anterior open bite (SAOB) represents one of the most complex and challenging malocclusions in orthodontics. Orthodontic treatment supported by miniplates enable to reduce the need for orthognathic surgery. Transverse dimension may be affected by intrusion biomechanics. This study aims to assess transverse bone alterations in patients with SAOB who underwent orthodontic treatment with absolute anchorage using four miniplates. METHODS: A total of 32 patients of both sexes, with an average age of 33.8 years, diagnosed with SAOB and treated orthodontically with four miniplates (one in each hemiarch), were selected for this study. Tomographic examinations were performed before (T1) and after (T2) orthodontic treatment. Linear measurements (width of the maxillary base, maxillary alveolar, maxillary root, maxillary dental cusp, mandibular alveolar) and angular measurements (maxillary intermolar angle) were assessed in these images. The Shapiro-Wilks normality tests were applied to verify data distribution, and the paired t-test was used to compare the initial and final measures obtained. RESULTS: Among the evaluated parameters, the maxillary alveolar width, maxillary dental cusp width, mandibular alveolar cusp width, and intermolar angle showed statistically significant differences between T1 and T2 (p < 0.05). However, maxillary base and maxillary root widths showed no significant difference (p > 0.05). CONCLUSIONS: Intrusion and distalization with miniplates in SAOB therapy may lead to significant expansive changes, due to molars cusps width and buccal inclination increase restricted at the alveolar level.

Orthodontic camouflage treatment of a hyperdivergent adolescent patient with anterior open bite and TMD: a case report.

BACKGROUND: In orthodontics, anterior open bite is a common malocclusion that recurs frequently. Because the causes of anterior open bite are so varied, medical professionals must create customized treatment programs for each patient based on their unique etiology. Through the lowering of the posterior teeth, closure of the anterior teeth gap, and cooperation with intermaxillary traction, the treatment plan outlined in this case study sought to achieve a stable occlusion. CASE PRESENTATION: This case report aims to describe an orthodontic camouflage treatment of a 15-year-old female patient with anterior open bite, arch width discrepancy and a history of temporomandibular joint disorder. The patient was treated with intermaxillary vertical elastics and the multiple edgewise arch wire (MEAW) approach. A satisfactory occlusion with a neutral molar relationship was attained after 29 months of orthodontic therapy. The condylography recording showed that this patient's occlusion tended to be more stable both before and after our treatment. The purpose of this case study is to provide an overview of an orthodontic camouflage treatment for a female patient, who had a history of temporomandibular joint disease, anterior open bite, and arch width disparity. CONCLUSIONS: Our results demonstrated that more attention should be paid to levelling the occlusal plane, intrusion of the molars, decompression of temporomandibular joints and the etiology factors of malocclusion during the orthodontic period for those patients with anterior open bite.

Associations between nonnutritive sucking habits, developing malocclusion, and various feeding practices in 3-6-year-old Indian urban children: A case-control study.

BACKGROUND: Nutritive sucking and nonnutritive sucking (NNS) may affect the craniofacial development, differently. AIM AND OBJECTIVES: We investigated associations between NNS habits (NNSHs), developing malocclusion, and various feeding practices in 3-6-year-old children. METHODOLOGY: A sample of 350 children 3-6-year-old from various preschools were selected for this case-control study (94 with NNSH and 256 without NNSH). NNSH (outcome) and feeding practices and developing malocclusions (exposures) were assessed using a structured study tool. RESULTS: The prevalence of NNSH in 3-6-year-old children was 26.8%. The odds (95% [confidence interval (CI)]) of boys compared to girls having NNSH were 0.66 (0.4121-1.706) (P = 0.0290). The overall prevalence of developing malocclusion in 3-6-year-old children was 34.01% out of which open bite was most commonly reported with 12.57% followed by spacing 8.5%, increased overjet 6.8%, crowding 2.2%, posterior crossbite and rotation 1.4%, and overbite 1.14%. Breastfeeding was found to be the most commonly used mode of feeding reported by 53.42% of mothers. It was found that the odds (95% [CI]) of subjects having NNSH were 0.66 (0.4694-0.9460) (P < 0.0001) who were not breastfed as compared to those who were breastfed. Among developing malocclusions, increased overjet with P = 0.0019, open bite with P = 0.0416, and spacing with P = 0.0243 were found to be associated with feeding practices. CONCLUSION: The prevalence of NNSH and developing malocclusions (increased overjet, open bite, and spacing) was 26.8% and 34.01%, respectively. Breastfeeding played a protective role against developing NNSH.

Oral health-related quality of life, adaptation/discomfort during open bite treatment with spurs: complementary analysis from a randomized clinical trial.

This single-center trial aimed to longitudinally compare the oral health-related quality of life (OHRQOL), adaptation and discomfort during anterior open bite (AOB) treatment with lingual spurs and build-ups (SBU) versus spurs only (S) approaches. Children (7-11 years) with AOB were randomly allocated into two treatment groups (SBU or S). The Child Perception Questionnaire (CPQ8-10) was applied 1 and 12 months after installation of the appliances. Questionnaires evaluating functional adaptation and discomfort during the first month of treatment were also applied. A visual analog scale (VAS) was used in these questionnaires. Generalized mixed models were used for analyzing OHRQOL and discomfort data. Generalized linear models were used to assess adaptation outcomes (α = 0.05). The SBU group included 24 patients (7 males and 17 females; mean age 8.2 years) and the S group included 25 patients (11 males and 14 females; mean age 8.3 years). Regardless of the treatment type, overall OHRQOL scores at 12 months were 0.69 times those recorded at 1 month after the appliances installation (i.e., ~ 31% reduction; exp (ß) = 0.69; 95% CI: 0.55, 0.88). A significant interaction between treatment and time was detected for the 'functional limitations' domain. For this domain, a significant improvement from the first to the twelfth month was observed in the S group (P < 0.001). Patients in both treatment groups showed similar and easy adaptation to the appliances. Independent of the type of treatment, tongue-related discomfort decreased over time. One week and one month after the appliance's delivery, the discomfort scores were 0.19 (i.e., ~ 81% reduction; exp (ß) = 0.19; 95% CI: 0.13, 0.28; P < 0.001) and 0.02 (i.e., ~ 98% reduction; exp (ß) = 0.02; 95% CI: 0.01, 0.07; P < 0.001) times, respectively, those issued immediately after the installation of the appliances. Regardless of treatment type; overall OHRQOL improved from the first to the twelfth month of AOB treatment. The functional limitations score decreased in the S group. Children showed easy adaptation, and their discomfort decreased 1 week after the installation of the appliances.Trial registration: Clinicaltrials.gov; NCT03702881, date of registration: October 11, 2018.

Noninvasive conservative management of anterior open bite treated with TADs versus clear aligner therapy.

OBJECTIVES: Anterior open bite can be treated non-surgically via molar intrusion using temporary skeletal devices (TAD). Clear aligner therapy (CAT) is recognized as a viable therapeutic modality for non-extraction treatment of adults with mild open bite. This study aimed to compare the treatment effect and mechanisms of open bite closure between patients treated with braces and TADs double arch intrusion and those treated with CAT. Treatment success at T3 was based on 1- positive overbite on ceph; 2- Change in the vertical dimension 3- post treatment POSI score equal to zero. MATERIAL AND METHODS: The TAD group includes 18 consecutively treated patients from the main author. The CAT group consisted of 16 selected patients from three different orthodontists. The observation time points were as follows: pretreatment (T1), end of molar intrusion and positive overbite achieved (T2), end of treatment (T3), at least 6-month follow-up (T4). Treatment changes were assessed by cephalometric analysis and frontal intraoral photo. RESULTS: At the end of treatment, 100% of the patient of the TAD group and 78,6% of the CAT group had a posi score of 0. The TAD group showed a significant reduction in vertical measurements (SN-MPA: -1,55° ± 0.41, LAFH: -3,05 ± 0.51 mm, U6-PP: -1.48 ± 0.30 mm), but the CAT group did not have significant changes for these variables. Both groups had significant increases in overbite from T1 to T3 (TAD: 4,32 ± 0,5 mm; CAT: 2,33 ± 0.56 mm), and overbite remained stable at T4. The CAT group did not have a significant upper molar intrusion, but a significant extrusion of 1.22 ± 0.42 mm of the lower incisor occurred. CONCLUSION: The TAD group achieved bite closure by upper molar intrusion, lower molar and incisors vertical control, and mandibular plane counterclockwise rotation, resulting in an improved AP and vertical relationship. The CAT group achieved bite closure through the lower incisor extrusion without significant change in the vertical dimension. CLINICAL RELEVANCE: This study provides relevant information about the skeletal and dental changes of open bite treatment with TADs double arch intrusion. The comparison with a control group treated with CAT confirms known information.

Changes in occlusal relationships observed using an intraoral scanner in patients with an acquired open bite: A case report.

PATIENTS: This case report describes a procedure for assessing changes in occlusal relationships in patients with acquired open bites due to temporomandibular joint disease using an intraoral scanner (IOS). A digital impression was made using the IOS at the initial visit. Subsequent impressions were made every 6 months using the IOS and magnetic resonance imaging (MRI) or computed tomography (CT). Standard triangulated language (STL) image files of two digital impressions at different points in time were superimposed, including the occlusal relationship with reference to the maxillary dentition. Finally, three-dimensional (3D) changes in the occlusal relationship over time were evaluated. DISCUSSION: In Case 1, the superimposed STL image indicated almost no evident deviation of the mandible. Therefore, an orthodontic treatment was initiated. In contrast, in cases 2 and 3, where changes in the occlusal relationship continued, secondary treatment was postponed and patients continued to be monitored periodically. In case 3, even though left condyle resorption was progressive, the degree of open bite on the right side improved after 6 months. However, the open bite continued to progress for another 6 months despite the stability of the condyle. CONCLUSIONS: Changes in the condylar shape observed using imaging may not always reflect changes in the occlusal relationship. In addition to changes in the condyles and eminences of the temporomandibular joint (TMJ), changes in the occlusal relationships of patients with acquired open bite should be evaluated using an intraoral scanner.

Surgery-first in interdisciplinary class II cases.

OBJECTIVES: To present an interdisciplinary case treated with a surgery-first orthognathic approach, followed by orthodontic and prosthodontic treatment. CLINICAL CONSIDERATIONS: After an accurate pre-operative virtual planning, a young patient with skeletal class II, retrognathia, and an anterior open bite was treated with bimaxillary orthognathic surgery without pre-surgical orthodontic decompensation. Orthodontic treatment was carried out post-operatively. The treatment was completed with a prosthodontic phase to improve the final esthetic outcome of the smile. CONCLUSIONS: A surgery-first approach allowed to achieve esthetic and functional results in a reduced treatment duration that remained stable over the course of 1 year. The outcomes were consistent with prior research in terms of advantages brought by following an accurately planned surgery-first protocol. Nevertheless, longer-term follow-up was required to evaluate the treatment stability. CLINICAL SIGNIFICANCE: An accurately planned surgery-first approach significantly helped in shortening the duration of the treatment, while providing a stable, functional, and esthetic solution to the patient's problems.

Biomechanical and clinical considerations in deep bite treatment using temporary skeletal anchorage devices.

Deep bite is usually treated by intrusion of the anterior teeth, extrusion of the posterior teeth, or a combination thereof. Various traditional methods have been used to correct deep bites, but they can cause negative side effects. Recently, temporary skeletal anchorage devices (TSADs) have been used to intrude the anterior teeth simply and efficiently without side effects. The amount of incisal exposure at rest should be considered as the first factor in determining which tooth segment should be intruded to correct a deep bite. The center of resistance of the anterior teeth should be considered to achieve the proper biomechanics when intruding them. The location of TSADs should be determined to ensure sufficient interradicular bone to achieve the desired tooth movement. Therefore, clinicians should understand the biomechanical and clinical considerations to correct a deep bite using TSADs.

Anterior open bite correction via molar intrusion: Diagnosis, advantages, and complications.

Anterior open bite can be effectively treated nonsurgically via molar intrusion. This technique, involving the intrusion of posterior teeth using temporary skeletal anchorage devices, prompts counterclockwise rotation of the mandible. This rotation not only corrects anterior open bite but also contributes to a decrease in anterior facial height, improvements in lip incompetency, and forward movement of the chin. For successful outcomes, temporary skeletal anchorage devices, installed on both the buccal and palatal sides, must deliver equivalent intrusion force to the maxillary teeth. Treatment planning should consider factors such as skeletal discrepancies, vertical excess, incisor exposure, and configuration of the occlusal plane. Clinicians are advised to closely monitor periodontal changes and consider overcorrection to ensure lasting stability and maintenance of incisal overlap post-treatment.

Dentoalveolar effects of skeletally anchored extrusion arch in anterior open bite patients: A prospective clinical trial.

OBJECTIVE: The purpose of this prospective clinical trial was to explore the dental and soft tissue changes accompanying the use of skeletally anchored nickel-titanium (NiTi) extrusion arch in the correction of anterior open bite (AOB). MATERIAL AND METHODS: Twenty female patients with a mean age of 16.5 ± 1.5 years and a mean dentoalveolar AOB of 2.38±0.7 mm participated in this study. All patients were treated with an maxillary 0.017×0.025-in NiTi extrusion arch, with the aid of miniscrews inserted between the maxillary second premolars and first molars bilaterally, to act as indirect anchorage. Three-dimensional digital models and lateral cephalometric radiographs were taken just before the insertion of the extrusion arch (T0) and after 10 months (T1). Paired-sample t-tests were used in analyzing the data, to evaluate the changes after treatment (T1-T0). A significance level of p < 0.05 was used. RESULTS: AOB was successfully closed in all patients, with a 4.35 ± 0.61 mm increase in the overbite. Maxillary incisors significantly extruded (2.52 ± 1.02 mm) and significantly reclined (5.78 ± 0.77°), with a resultant decrease in the overjet of 1.58 ± 0.5mm. A significant intrusion of maxillary first molars with no change in their inclination was observed. The upper lip showed a significant retraction tendency to the E-plane, and a significant increase in the nasolabial angle was observed. CONCLUSION: The skeletally anchored NiTi extrusion arch was an effective technique in treating AOB, with no adverse effects on the molars.

Surgical-orthodontic with atypical extraction pattern as a treatment for an anterior open bite: A case report.

This case report described th e surgical- orthodontic interdisciplinar y t reatment of a patie nt with skeletal anterior open bite, class III skelet al pa ttern, steep mandibular plane, increa sed lower face heigh t, and thin mandibular sym physis. The or thodontic p reparation included an unusual extraction pattern (maxillary right first molar, maxillary left second premolar, and mandibular right central incisor), combined with two-jaw surger y comprised of maxillar y advancement and d ifferential impac tion, b ilateral malarplasty augme ntation and man dib ula r asymmetric bilateral sagittal split osteotomy setback. The follow-up of a rare complication of surgical hooks breakage during surgery is reported. Guided by 3- dimesional digital platforms, treatment planning and execution, resulted in a more ba lan ced a nd proportionate face with functional occlusion, and the case stability is shown i n a 32-m onth follow-up.

Comparison of Class II open bite correction by temporomandibular joint prostheses or bimaxillary orthognathic surgery.

INTRODUCTION: The aim of this study was to evaluate the outcome of skeletal Class II and anterior open bite patients who received simultaneous Le fort I osteotomies with temporomandibular joint (TMJ) prostheses or bimaxillary orthognathic surgery. MATERIALS AND METHODS: Patients with condylar resorption (CR) were treated by TMJ prostheses and orthognathic surgery and divided into two groups. Cephalometric radiographs were obtained before and after operation to find out the surgical alteration by comparing measures at different time points. RESULTS: 23 patients were included. Mean overbite of the patients was increased by 3.39 mm in TMJ prostheses group and 3.24 mm in orthognathic group. Occlusal plane angle was averagely rotated -6.06° and 1.31°; mandibular plane counterclockwise rotated 12.23° and 5.81°, respectively. The increase of ramus height in TMJ prostheses group were significantly greater than orthognathic surgery group (8.02 ± 1.96 mm vs. -0.09 ± 1.29 mm). The overall treatment effect was stable in both groups during the 1-year follow up. DISCUSSION: Two surgical plans seem to be reliable treatments of anterior open bite and mandibular retrognathism caused by temporomandibular disease. TMJ prostheses with simultaneous Le fort I osteotomies close open bite by lengthening the height of ramus and rotating maxillo-mandibular complex counterclockwise, while bimaxillary orthognathic surgery by rotating maxilla clockwise and mandible counterclockwise without rebuilding ramus.

Effect of occlusal hypofunction on centre of resistance in maxillary central incisor using the finite element method.

OBJECTIVES: To determine differences in the location of centre of resistance (Cres) between functional and hypofunctional teeth and to evaluate the relationship between the pulp cavity volume and locations of the Cres, using the finite element (FE) method. DESIGN: Retrospective cohort study. PARTICIPANTS: FE models of right maxillary central incisor, derived from cone-beam computed tomography (CBCT) images of 46 participants, were divided into normal function (n = 23) and hypofunction (n = 23) groups using anterior overbite and cephalometric measurements. METHODS: Measurements of the tooth and pulp cavity volume were made from the CBCT. Cres levels were presented as percentages of the root length from the root's apex. All data were analysed and compared using the independent t-test (P < 0.05). The relationship between the location of Cres and volume ratios were evaluated statistically. RESULTS: The means of the pulp cavity/tooth volume and root canal/ root volume ratio of the maxillary central incisor in the anterior open bite group were significantly greater than those in the normal group. The average location of Cres in the anterior open bite group was 0.6 mm (3.7%) apically from the normal group, measured from root apex. The difference was statistically significant (P < 0.01). There was a significant correlation between root canal/root volume ratio and locations of Cres (r = -0.780, P < 0.001). CONCLUSIONS: The Cres in the hypofunctional group was located more apical than the functional group. As the pulp cavity volume increased, the level of Cres shifted apically.

Comparison of mesiodistal angulations of premolars and molars in anterior open bite subjects with different sagittal malocclusions: A retrospective study.

INTRODUCTION: Mesiodistal angulation of premolars and molars can be altered by forces of open bite malocclusion. The aim of this study was to compare the mesiodistal angulations of the posterior teeth in class I, II, and III individuals with anterior open bite (AOB) versus individuals with harmonious occlusion. METHODS: This comparative cross-sectional study used 299 lateral head radiographs of individuals with permanent dentition. There were 4 groups (harmonious occlusion [n=89], Class I open bite [OB] [n=75], Class II OB [n=66], and Class III OB [n=69]). Premolar (1UPM, 2UPM) and molar (1UM, 2UM) angulations were measured relative to the occlusal plane and the palatal or mandibular plane by a trained and calibrated evaluator. ANOVA and Scheffe tests were used for statistical analyses (P<0.05). RESULTS: The mesial angulation of the upper premolars showed greater angulation of between approximately 2° and 5° in the OB groups compared to the harmonious occlusion group (P<0.05). Only in the Class II OB group did the first and second upper molars show distal angulation in relation to the palatal plane (1UM 81.85°±5.42°; 2UM 75.32±7.4°) (P<0.05). The Class III OB group presented the greatest distal angulations of the lower premolars and molars (between 3° to 5° of difference, P<0.05) in relation to those of the harmonious occlusion group. CONCLUSIONS: The upper first premolars in all the AOB groups and the lower second premolars in the Class II OB group had greater mesioangulation. Additionally, the upper molars of the Class II OB group and the lower molars of the Class III OB group showed distoangulation compared with the molars in the group with harmonious occlusion.

Adult female skeletal anterior open bite treated by customized lingual orthodontic appliance with miniscrews-assisted in vertical control for perfect orthodontic compensation: A case report with 5-year follow-up.

The benefits of lingual orthodontics go beyond appearance. In this case study, a 30-year-old female patient was treated with a custom lingual orthodontic appliance for a Class II high-angle malocclusion, anterior open bite, incisor biprotrusion and crossbite, unilateral second molar scissor bite and dysfunctional tongue thrust. To achieve a counterclockwise rotation of the mandible, implant anchorage was used to control the vertical height. To complete the compensatory therapy, four first premolars were removed. As well as ensuring aesthetics over the 20-month treatment period, the treatment also established a Class I molar relationship, normal overbite and overjet, and improved the facial profile. After a five-year follow-up, the treatment results remained stable.