[Improvement of the mastication function of orthodontics combined with restoration in the treatment of deep overbite with severe lower anterior teeth attrition].

PURPOSE: To observe the effect of orthodontics combined with restoration on masticatory function in deep overbite patients with severe lower anterior teeth attrition. METHODS: From January 2018 to January 2022, a total of 164 deep overbite patients with severe lower anterior teeth attrition were collected and divided into two groups according to different treatment plans: control group(72 patients, with restoration treatment) and experimental group(92 patients, with orthodontics combined with restoration treatment). The chewing efficiency of the two groups was evaluated, temporomandibular joint dysfunction index (DI), muscle palpation index (PI) and cranio-mandibular index (CMI) were calculated. The satisfaction with facial esthetic, the Chinese version of Oral Health Impact Scale-14(OHIP-14) and the repair satisfaction score were evaluated, the occurrence of adverse events between the two groups was compared. SPSS 23.0 software package was used for statistical analysis. RESULTS: After treatment, the chewing efficiency of the experimental group was significantly improved compared to the control group, while the DI, PI, and CMI were significantly reduced compared to the control group(P＜0.05). Compared with the control group, the satisfaction degree with facial esthetic and restoration in the experimental group was significantly higher, while the OHIP-14 score was significantly lower after treatment(P＜0.05). The incidence of adverse events in the experimental group was significantly decreased compared with the control group (6.52% vs 25.00%, P＜0.05). CONCLUSIONS: Combination of orthodontics and restoration treatment can enhance the effectiveness of restoration treatment for deep overbite with severe lower anterior teeth attrition, improve the mastication function and temporomandibular joint balance,satisfaction and quality of life of patients, as well as reduce the risk of adverse events.

Comparative Evaluation of Digital Cephalometric Tracing Applications on Mobile Devices and Manual Tracing.

BACKGROUND Cephalometric radiography evaluates facial skeleton development and aids in diagnosis and treatment phases (pre and post) in orthodontics. This study aimed to compare digital cephalometric tracing using a smartphone application (App), a tablet-based platform, and manual tracing in 30 orthodontic patients. MATERIAL AND METHODS Thirty orthodontic pretreatment, criteria based, lateral cephalometric radiographs were analyzed/grouped for Steiner analysis parameters (5 skeletal, 3 dentals, 1 soft tissue) by 3 tracing methods [manual - group (Gp M), smartphone (Android - OS9) - Gp S, tablet (Apple - IOS13) - Gp T) after mandatory standardization/calibration. Measurements include 5 angular (SNA, SNB, ANB, SNMPA, SNOP), 3 linear U1NA, L1NB, U1L1, and 1 soft tissue (S line) (millimeters and degrees). Inter-examiner rating was determined using Dahlberg's test. After normality distribution testing (Shapiro-Wilk), data were analyzed using one-way analysis of variance (ANOVA) for group differences. Homogeneity of variance was verified using the Levene test. Differences were determined on probability value of (p≤0.05). RESULTS The results showed that Steiner's analysis parameters were similar in all groups with homogenous variances. Highest differences in mean values were found for L1NB, U1L1, and S line measurement, with higher values being observed in Gp S tracings. However, these differences were not statistically significant (p≤0.05). All parameters, irrespective of being measured in either degrees or millimeters, had means comparable to each other. CONCLUSIONS Smartphone and tablet-based applications produced tracings that were comparable and reliable when compared to conventional manual tracings. Standardization of images, processing, printing, and calibration of devices is important to achieve good results.

The Synergy of Periodontic and Orthodontic Collaboration in Contemporary Oral Health Practice.

Orthodontic treatment (OT) has become a means of improving psychosocial well-being secondarily to enhanced occlusal function and can help patients obtain normal oral physiologic function, coordinated facial profiles, and healthy dentomaxillofacial development. With more adult patients undergoing OT, the need for interdisciplinary treatment and collaboration is vital to ensure periodontal health. This article highlights the importance of combined efforts between periodontics and orthodontics in adult patients with a history of periodontitis who are interested in OT. Furthermore, the article discusses the technological and surgical advances within these specialties, as well as timing of synchronization of treatment. A clinical case demonstrates the results of a collaborative periodontics and orthodontics approach to treat an adult patient with a history of advanced periodontal disease.

Evaluating the Therapeutic Properties of Natural Products in Orthodontic and Surgical Treatment of Dentofacial Deformities: A Systematic Review of Clinical Trials.

The use of natural products as alternatives to traditional pharmacological treatments in orthodontics is gaining interest due to their anti-inflammatory, antibacterial, and antioxidant properties. This systematic review synthesizes evidence from clinical trials to evaluate the efficacy of natural products in reducing inflammation and bacterial presence in orthodontic and orthognathic treatment settings. The database search was conducted across PubMed, Scopus, and Embase up to January 2024. The review focused on randomized controlled trials only. The selected studies centered on the anti-inflammatory, antibacterial, and antioxidant effects of natural products, adhering to the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines for data extraction. Nine studies, totaling 358 participants, were included. Significant findings demonstrated a reduction in gingival inflammation by over 40% with the use of Aloe vera compared to chlorhexidine. Another study noted a decrease in bleeding on probing by 13.6 points in the treatment group over placebo. Additionally, honey showed a rapid modulation of plaque pH and significantly reduced bacterial counts of Streptococcus mutans. Furthermore, the use of resveratrol emulgel was linked to substantial improvements in gingival health, with a reduction in the gingival index and probing pocket depth. The results indicate that natural products can significantly enhance orthodontic treatment outcomes by reducing inflammation and bacterial levels. These products offer effective alternatives to traditional treatments and show potential for integration into routine orthodontic care protocols. Further research is encouraged to standardize application methods and dosages to maximize clinical benefits and patient satisfaction.

Awareness of orthodontic patients towards smartphone orthodontic apps.

BACKGROUND: Mobile phone applications (apps) can potentially enhance patient care as they are easy to use and offer multifunctions. In 2019, 305 orthodontic apps were documented, many of which were patient-focused; however, there was little information on how popular these applications are with orthodontic patients. The main aim of this study was to evaluate how well patients were now aware of orthodontic applications. METHODS: A survey asking 700 orthodontic patients about their knowledge of, access to, and use of orthodontic apps to facilitate their treatment resulted in 615 responses. RESULTS: The results showed that a smartphone was owned by 96% of patients. Apple (Apple Inc., Cupertino, CA, USA) was the most used platform, followed by Android (Google LLC, Mountain View, CA, USA). Seventy-five percent of patients have previously used social media to research information, with YouTube (YouTube, San Mateo, CA, USA) being the most popular site. Only 3% of patients knew that applications were available to aid with orthodontic therapy and 12 patients had utilized an app linked to orthodontics. Nevertheless, 88% of patients said they would be open to using an app to supplement their treatment. CONCLUSIONS: Although 88% of patients said they would be prepared to use an app to help with orthodontic treatment, there is currently a low level of knowledge of the existence of apps. Given the availability of applications geared toward those patients, it is necessary to evaluate these apps' quality and, when critical, direct patients toward high-quality, efficient apps.

Accuracy and reliability of magnetic resonance imaging in orthodontic diagnosis and treatment planning-a systematic review and meta-analysis.

BACKGROUND: Magnetic resonance imaging (MRI) is a non-ionizing imaging technique. Using MRI in dentistry may potentially lower the general radiation dose of the examined population, provided MRI can replace various radiation-based images. Furthermore, novel MRI imaging modalities for three-dimensional and two-dimensional cephalometrics have recently been developed for orthodontic diagnosis. OBJECTIVES: This systematic review aimed to determine the diagnostic accuracy and reliability of MRI in orthodontic diagnosis and treatment planning. SEARCH METHODS: An electronic search was conducted on 20 November 2022 in the following databases: PubMed, LILACS, Web of Science, EMBASE, Scopus, and Cochrane. The search was updated on 30 August 2023. Furthermore, a grey literature search was performed in Google Scholar and Open-Grey. SELECTION CRITERIA: This review included descriptive, observational, cohort studies, cross-sectional, case-control studies, and randomized/non-randomized trials related to the research question. The study excluded studies related to patients with syndromes, chronic diseases, craniofacial anomalies, or bone diseases. DATA COLLECTION AND ANALYSIS: The included studies were quality assessed using the "Joanna Brigg's Critical Appraisal Tool for diagnostic test accuracy". The GRADE approach for non-randomized studies was used for strength-of-evidence analysis. RESULTS: Eight of the 10 included studies compared MRI with either cone beam computed tomography or lateral cephalogram and found a high intra- and inter-rater agreement for landmark identification. The risk of bias was high in four studies, moderate in three, and low in three studies. Homogeneity was lacking among the included studies in terms of MRI imaging parameters and sample characteristics. This should be taken into consideration by future studies where uniformity with respect to these parameters may be considered. CONCLUSIONS: Despite dissimilarity and heterogeneity in the sample population and other methodological aspects, all the included studies concluded that MRI enjoyed considerable intra- and inter-examiner reliability and was comparable to current diagnostic standards in orthodontics. Furthermore, the studies agreed on the innovative potential of MRI in radiation-free diagnosis and treatment planning in orthodontics in the future. REGISTRATION: CRD number: CRD420223XXXXX.

Resorptions and orthodontics / Résorptions et orthodontie

Introduction: It's generally accepted that one of the risks associated with orthodontic treatment is apical root resorption, even though this may occur outside orthodontic treatment. In any case, it causes root shortening. Orthodontists are probably the only dental surgeons who use the inflammatory process as a therapeutic tool. They need to be aware of the risk factors for root inflammation. Along with recurrence, leukemia and periodontal problems, resorption is one of the "inconveniences" of orthodontics, which, if not inevitable, must at least be minimized. Material and Method: At present, the orthodontic literature on root resorption provides some clues as to the factors associated with the onset, severity and management of root resorption, although the complexity of this phenomenon does not allow us to arrive at a clear and unequivocal consensus. For this reason, it is important to identify potential risk factors for resorption, to take them into account before/during and after treatment, and to know what attitude to adopt in the event of resorption appearing, all in order to minimize this phenomenon, as everyone agrees that it can be a source of harm and stress for both patient and practitioner. Conclusion: There are still many grey areas in our understanding of the phenomenon, including how the elements of orthodontic treatment influence orthodontic resorption. Irreversible in nature, resorption can be sufficiently extensive to cast doubt on the benefit of successful orthodontic treatment.

Introduction: Il est généralement admis que l'un des risques associés au traitement orthodontique est la résorption radiculaire apicale même si elle peut se produire en dehors de tout traitement orthodontique. Quoi qu'il en soit, elle provoque le raccourcissement radiculaire. Les orthodontistes sont sans doute les seuls spécialistes de la chirurgie dentaire qui utilisent le processus inflammatoire en tant que moyen thérapeutique. Ils doivent connaître les facteurs de risque de cette inflammation sur la racine. La résorption fait partie, au même titre que la récidive, les leucomes et les problèmes parodontaux, des « inconvénients ¼ de l'orthodontie qui, à défaut d'être inévitables, doivent au moins être minimisés. Matériels et méthode: Actuellement, la littérature orthodontique sur la résorption radiculaire fournit quelques pistes sur les facteurs associés à l'apparition, la gravité et la gestion de la résorption radiculaire, même si la complexité de ce phénomène ne nous permet pas d'en dégager un consensus clair et équivoque. Pour cette raison, il est important d'identifier les facteurs de risque de résorption potentiels pour en tenir compte avant/pendant et après le traitement et connaître l'attitude à adopter en cas d'apparition de résorptions, tout ceci afin de minimiser ce phénomène, car tout le monde s'accorde sur le fait qu'elle peut être source de préjudice et de stress pour le patient et le praticien. Conclusion: De nombreuses zones d'ombres subsistent dans la compréhension du phénomène, notamment sur comment les éléments du traitement orthodontique influencent la résorption orthodontique. De nature irréversible, la résorption peut être suffisamment étendue pour jeter un doute sur le bénéfice apporté au succès du traitement orthodontique.

An Evaluation of Knowledge, Attitude, and Practice of Accelerated Orthodontics amongst Orthodontists.

BACKGROUND: Accelerated orthodontic teeth movement are procedures carried out to increase the rate of tooth movement thereby reducing treatment time. There are numerous techniques currently available to accelerate orthodontic treatment time, but evidence is still needed to determine the degree to which orthodontists accept and practice accelerated orthodontics. The present study is aimed at assessing the knowledge of Orthodontists on the practice of accelerated orthodontics; as well as their willingness to adopt it as a treatment option for their patients. METHODOLOGY: Ethical approval was obtained before the commencement of the study. The study population comprised all orthodontists practicing in Nigeria. Questionnaires were administered physically to the orthodontists at their annual general meeting. E-mails were further used to distribute the questionnaire to the orthodontists who were absent from the annual meeting. The questionnaire obtained information on respondents' biodata, knowledge, attitude, and practice of accelerated orthodontic treatment procedures.Statistical analysis was performed using IBM SPSS software version 27. The level of significance was 0.05 for all statistical analysis. RESULTS: The study participants comprised 60 respondents, with a mean age of 34.18 years and a male-to-female ratio of 1.3:1. A Majority of them were satisfied with treatment time/duration (61.7%), they had a good knowledge of accelerated orthodontics (83.3%) with piezocision (75%) and micro-osteoperforation (63.3%) being the most popular. All orthodontists were interested in accelerated orthodontics, if it offered up to 30% reduction in treatment time. Major limitations to the practice included unavailability of technique materials (50%), insufficient knowledge (41.7%) and cost (35%). CONCLUSION: Most orthodontists did not routinely practice accelerated orthodontics despite adequate knowledge. They were willing to offer accelerated orthodontic treatment (AOT) if patients were willing to pay an additional fee. The less invasive methods were more accepted.

CONTEXTE: Les mouvements dentaires orthodontiques accélérés sont des procédures réalisées pour augmenter la vitesse de déplacement des dents, réduisant ainsi le temps de traitement. Il existe de nombreuses techniques actuellement disponibles pour accélérer le temps de traitement orthodontique, mais des preuves sont encore nécessaires pour déterminer dans quelle mesure les orthodontistes acceptent et pratiquent l'orthodontie accélérée. La présente étude vise à évaluer les connaissances des orthodontistes sur la pratique de l'orthodontie accélérée, ainsi que leur volonté de l'adopter comme option de traitement pour leurs patients. MÉTHODOLOGIE: L'approbation éthique a été obtenue avant le début de l'étude. La population étudiée comprenait tous les orthodontistes exerçant au Nigeria. Des questionnaires ont été administrés physiquement aux orthodontistes lors de leur assemblée générale annuelle. Des courriels ont ensuite été utilisés pour distribuer le questionnaire aux orthodontistes absents de l'assemblée annuelle. Le questionnaire a recueilli des informations sur les données biographiques des répondants, ainsi que sur leurs connaissances, attitudes et pratiques en matière de traitement orthodontique accéléré. L'analyse statistique a été réalisée à l'aide du logiciel IBM SPSS version 27. Le niveau de signification était de 0,05 pour toutes les analyses statistiques. RÉSULTATS: Les participants à l'étude étaient au nombre de 60, avec un âge moyen de 34,18 ans et un ratio hommes-femmes de 1,3:1. La majorité d'entre eux étaient satisfaits du temps/durée du traitement (61,7 %), ils avaient de bonnes connaissances en orthodontie accélérée (83,3 %) avec la piezocision (75 %) et la micro-ostéoperforation (63,3 %) étant les plus populaires. Tous les orthodontistes étaient intéressés par l'orthodontie accélérée, si elle offrait une réduction allant jusqu'à 30 % du temps de traitement. Les principales limitations à la pratique comprenaient l'indisponibilité des matériaux de technique (50 %), le manque de connaissances (41,7 %) et le coût (35 %). CONCLUSION: La plupart des orthodontistes ne pratiquaient pas systématiquement l'orthodontie accélérée malgré des connaissances adéquates. Ils étaient prêts à proposer un traitement orthodontique accéléré (TOA) si les patients étaient prêts à payer des frais supplémentaires. Les méthodes moins invasives étaient plus acceptées. MOTS-CLÉS: Orthodontie accélérée, orthodontiste, temps de traitement, piezocision.

Artificial Intelligence in Orthodontics: Critical Review.

With increasing digitalization in orthodontics, certain orthodontic manufacturing processes such as the fabrication of indirect bonding trays, aligner production, or wire bending can be automated. However, orthodontic treatment planning and evaluation remains a specialist's task and responsibility. As the prediction of growth in orthodontic patients and response to orthodontic treatment is inherently complex and individual, orthodontists make use of features gathered from longitudinal, multimodal, and standardized orthodontic data sets. Currently, these data sets are used by the orthodontist to make informed, rule-based treatment decisions. In research, artificial intelligence (AI) has been successfully applied to assist orthodontists with the extraction of relevant data from such data sets. Here, AI has been applied for the analysis of clinical imagery, such as automated landmark detection in lateral cephalograms but also for evaluation of intraoral scans or photographic data. Furthermore, AI is applied to help orthodontists with decision support for treatment decisions such as the need for orthognathic surgery or for orthodontic tooth extractions. One major challenge in current AI research in orthodontics is the limited generalizability, as most studies use unicentric data with high risks of bias. Moreover, comparing AI across different studies and tasks is virtually impossible as both outcomes and outcome metrics vary widely, and underlying data sets are not standardized. Notably, only few AI applications in orthodontics have reached full clinical maturity and regulatory approval, and researchers in the field are tasked with tackling real-world evaluation and implementation of AI into the orthodontic workflow.

The use of CBCT in orthodontics with special focus on upper airway analysis in patients with sleep-disordered breathing.

Applications of cone-beam CT (CBCT) in orthodontics have been increasingly discussed and evaluated in science and practice over the last two decades. The present work provides a comprehensive summary of current consolidated practice guidelines, cutting-edge innovative applications, and future outlooks about potential use of CBCT in orthodontics with a special focus on upper airway analysis in patients with sleep-disordered breathing. The present scoping review reveals that clinical applications of CBCT in orthodontics are broadly supported by evidence for the diagnosis of dental anomalies, temporomandibular joint disorders, and craniofacial malformations. On the other hand, CBCT imaging for upper airway analysis-including soft tissue diagnosis and airway morphology-needs further validation in order to provide better understanding regarding which diagnostic questions it can be expected to answer. Internationally recognized guidelines for CBCT use in orthodontics are existent, and similar ones should be developed to provide clear indications about the appropriate use of CBCT for upper airway assessment, including a list of specific clinical questions justifying its prescription.

Effect of attachment type on distal bodily movement of the maxillary canine in aligner orthodontics: a finite element study.

OBJECTIVES: To clarify the effect of attachment types on bodily movement of the maxillary canine in aligner orthodontics. MATERIALS AND METHODS: Using an aligner, the canine was moved bodily by 0.1 mm distally as a target position. Orthodontic tooth movement was simulated using the finite element method (FEM). The alveolar socket was displaced in the same manner as the initial movement caused by elastic deformation of the periodontal ligament. First, the initial movement was calculated, and then the alveolar socket was displaced in the same direction and with the same magnitude as the initial movement. These calculations were repeated to move the teeth after placement of the aligner. The teeth and the alveolar bone were assumed to be rigid bodies. A FEM model of the aligner was made based on the crown surfaces. The thickness of the aligner was 0.45 mm, and its Young's modulus was 2 GPa. Three types of attachments-semicircular couple, vertical rectangular, and horizontal rectangular-were placed on the canine crown. RESULTS: Regardless of the type of attachment, upon placement of the aligner on the dentition the crown of the canine moved to the target position, while the apex hardly moved. That is, the canine tipped and rotated. After repeating the calculation, the canine became upright and moved bodily regardless of the attachment type. In the aligner without an attachment, the canine did not become upright. CONCLUSIONS: There was almost no difference among attachment types in terms of achieving bodily movement of the canine.

Interdisciplinary treatment to replace missing upper lateral incisors, 4.5 years follow up / Tratamiento interdisciplinario para reposición de incisivos laterales superiores faltantes, seguimiento de 4,5 años

Introduction: Multidisciplinary diagnosis and planning are essential to define the treatment option that will provide the best individual results for patients with congenitally missing upper lateral incisors. Objective: To determine the function and aesthetics after the therapeutic use of osseintegrated implants to replace congenitally missing upper lateral incisors in a young female at 4.5 years follow-up. Case report: The patient was a 13 years old female (at beginning of treatment) with congenitally missing upper lateral incisors condition. Five months after the orthodontic active treatment, the space for placing the implants was achieved. After 2 years of Orthodontic treatment and the evaluation of the craniomandibular growth term by hand radiography, two implants were placed with an expanded bone technique in the position of the upper lateral incisors. After 4 months, osseointegration was clinically confirmed and two screw retained temporary crowns were performed using temporary plastic abutments and acrylic teeth and recalled at 4.5 years to control. Conclusions: Our results showed predictable esthetics and functional results in a patient with congenitally missing upper lateral incisors. This was possible due to a multidisciplinary approach between the diagnosis and treatment performed (Orthodontics, Implantology and Prosthodontics(AU)

Introducción: El diagnóstico y la planificación multidisciplinarios son esenciales para definir la opción de tratamiento que proporcionará los mejores resultados individuales para los pacientes con incisivos laterales superiores que faltan congénitamente. Objetivo: Fue determinar la función y la estética después del uso terapéutico de implantes osteointegrados para reemplazar los incisivos laterales superiores ausentes congénitamente en una mujer joven a los 4,5 años de seguimiento. Presentación del caso: La paciente, mujer de 13 años (al inicio del tratamiento) con una condición congénita de incisivos laterales superiores ausentes. Cinco meses después del tratamiento activo de ortodoncia, se logró el espacio para la colocación de los implantes. Después de 2 años de tratamiento de Ortodoncia y la evaluación del término de crecimiento cráneo-mandibular corroborado mediante radiografía de mano, se colocaron dos implantes con técnica de hueso expandido en la posición de los incisivos laterales superiores. Después de 4 meses, se confirmó clínicamente la osteointegración y se realizaron dos coronas provisionales atornilladas utilizando pilares de plástico provisionales y dientes acrílicos y se controlaron a los 4,5 años de seguimiento. Conclusiones: Nuestros resultados mostraron resultados estéticos y funcionales predecibles en un paciente con incisivos laterales superiores ausentes congénitamente. Esto fue posible gracias a un abordaje multidisciplinar entre el diagnóstico y el tratamiento realizado (Ortodoncia, Implantología y Prostodoncia(AU)

Congruencia entre modelos dentales impresos 3D y el archivo digital de origen: estudio in vitro comparativo de 5 impresoras 3D / Congruence between 3D printed dental models and the original digital file: comparative in vitro study of 5 3D printers

Este trabajo tuvo como objetivo conocer la fiabilidad de la impresora 3D (i3D) aditiva por Matriz de Proceso Digital de Luz (MDLP) Hellbot modelo Apolo®, a través de verificar la congruencia dimensional entre las mallas de modelos impresos (MMi) y su correspondiente archivo digital de origen (MMo), obtenido del software de planificación ortodontica Orchestrate 3D® (O3D). Para determinar su uso en odontología y sus posibilidades clínicas, fue comparada entre cinco i3D de manufactura aditiva, dos DLP, dos por estereolitografía (SLA) y una por Depósito de Material Fundido (FDM). La elección de las cinco i3D se fundamentó en su valor de mercado, intentando abarcar la mayor diversidad argentina disponible. Veinte modelos fueron impresos con cada i3D y escaneados con Escáner Intraoral (IOS) Carestream modelo 3600® (Cs3600). Las 120 MMi fueron importadas dentro del programa de ingeniería inversa Geomagic® Control X® (Cx) para su análisis 3D, consistiendo en la superposición de MMo con cada una de las MMi. Luego, una evaluación cualitativa de la desviación entre la MMi y MMo fue realizada. Un análisis estadístico cuidadoso fue realizado obteniendo como resultado comparaciones en 3d y 2d. Las coincidencias metrológicas en la superposición tridimensional permitieron un análisis exhaustivo y fácilmente reconocible a través de mapas colorimétricos. En el análisis bidimensional se plantearon planos referenciados dentariamente desde la MMo, para hacer coincidir las mediciones desde el mismo punto de partida dentaria. Los resultados fueron satisfactorios y muy alentadores. Las probabilidades de obtener rangos de variabilidad equivalentes a +/- 50µm fueron de un 40,35 % y de +/- 100µm un 71,04 %. Por lo tanto, te- niendo en cuenta las exigencias de congruencia dimensional clínicas de precisión y exactitud a las cuales es sometida nuestra profesión odontológica, se evitan problemas clínicos arrastrados por los errores dimensionales en la manufactura (Cam) (AU)

The objective of this study was to determine the reliability of the Hellbot Apollo® model additive 3D printer (i3D) by Matrix Digital Light Processing (MDLP) by verifying the dimensional congruence between the printed model meshes (MMi) and their corresponding digital source file (MMo), obtained from the Orchestrate 3D® (O3D) orthodontic planning software. A comparison was made between five i3D of additive manufacturing, two DLP, two by stereolithography (SLA), and one by Fused Material Deposition (FDM), to determine its use in dentistry and its clinical possibilities. The choice of the five i3D was based on their market value, trying to cover most of the Argentinean diversity available. Twenty models were printed with each i3D and scanned with Carestream Intraoral Scanner (IOS) model 3600® (Cs3600). The 120 MMi were imported into the reverse engineering program Geomagic® Control X® (Cx) for 3D analysis, consisting of overlaying MMo with each MMi. Then, a qualitative evaluation of the deviation between MMi and MMo. Also, a careful statistical analysis was performed, resulting in 3d and 2d comparisons. Metrological coincidences in three-dimensional overlay allowed a comprehensive and easily recognizable analysis through colorimetric maps. In the two-dimensional analysis, dentally referenced planes were proposed from the MMo, to match the measurements from the same dental starting point. The results were satisfactory and very encouraging. The probabilities of obtaining ranges of variability equivalent to +/- 50µm were 40.35 % and +/- 100µm 71.04 %. Therefore, considering the demands of clinical dimensional congruence, precision, and accuracy to which our dental profession it is subjected, clinical problems caused by dimensional errors in manufacturing (Cam) are avoided (AU)

Agreement of in vitro orthodontic measurements on dental plaster casts and digital models using Maestro 3D ortho studio software.

OBJECTIVE: Diagnostic casts are one of the standard components of orthodontic records. But they have several drawbacks such as the need for physical space for storage and the risk of breaking due to their brittle composition. Today, the digitalization of orthodontic models is a progress in orthodontics. The purpose of this study was to compare and evaluate common orthodontic linear measurements on plaster casts and digital 3D models using Maestro 3D ortho studio® scanner and software (AGE Solutions®, Pontedera, Italy). MATERIALS AND METHODS: Study casts of 30 orthodontic patients were selected. Tooth width, space analysis, Bolton analysis, overjet, overbite, and linear measurements of dental arch dimensions were performed by two examiners on plaster casts and digital models. STATISTICAL ANALYSIS: Intra- and interexaminer agreements were evaluated in both manual and digital methods and paired t test was used for evaluating the agreement between the manual and digital measurement. The significance level was set at 0.05. RESULTS: The intraexaminer agreement was excellent (ICC > 0.75) for most variables in both manual and digital methods. The correlation between the two examiners was significant (p < .05) for most manual and digital measurements. The differences between the manual and digital measurements, although maybe statistically significant, were not clinically significant for most variables. CONCLUSION: The use of "Maestro 3D" (AGE Solutions, Pontedera, Italy) scanner and software was acceptable for orthodontic diagnostic measurements instead of study casts.

Oral health status after orthodontic treatment: a retrospective study / Estado de salud bucal después del tratamiento de ortodoncia: un estudio retrospectivo

ABSTRACT: Orthodontic appliances in the oral cavity may cause problems such as white spot lesions, dental plaque, periodontal disease and root resorption. The aim of this study was to investigate the association between orthodontic treatment and oral health parameters including visible dental plaque, gingival recession and white spot lesions (WSLs). A total of 170 patients (86 females, 84 males) were randomly selected to determine visible dental plaque, gingival recession and white spot lesions by using pre-treatment and post-treatment oral photographs. Except of previously extracted teeth, maxillary and mandibular incisors, canine, 1st and 2nd premolars and 1st molar were evaluated. There was a significant difference between the T0 (before treatment) and T1 (after treatment) groups in visible plaque (P< 0.001). The distribution of gingival recession frequencies according to Miller classification before treatment did not differ from the after treatment (P=082). A statistically significant increase in the severity of WSL was detected between the two time points (P< 0.001). Males have been shown to have higher WSL incidence after treatment. In conclusion, the present study showed that visible dental plaque and white spot lesions significant increase after orthodontic treatment. Considering the relationship between oral health and orthodontic treatment, clinicians and patients should know the risks and take precautions.

RESUMEN: Los aparatos de ortodoncia en la cavidad oral puede causar problemas como lesiones de mancha blanca, placa dental, enfermedad periodontal y reabsorción radicular. El objetivo de este estudio fue investigar la asociación entre el tratamiento de ortodoncia y los parámetros de salud bucal, incluida la placa dental visible, la recesión gingival y las lesiones de mancha blanca (LMB). Un total de 170 pacientes (86 mujeres, 84 hombres) fueron seleccionados al azar para determinar la placa dental visible, la recesión gingival y las lesiones de manchas blancas mediante el uso de fotografías orales antes y después del tratamiento. Excepto los dientes extraídos previamente, se evaluaron incisivos maxilares y mandibulares, caninos, premolares y primeros molares. Hubo una diferencia significativa entre los grupos T0 (antes del tratamiento) y T1 (después del tratamiento) en la placa visible (P<0.001). La distribución de las frecuencias de recesión gingival según la clasificación de Miller antes del tratamiento no mostraron diferencias significativas con respecto al postratamiento (P=0.082). Se detectó un aumento estadísticamente significativo en la gravedad de LMB entre los dos puntos de tiempo (P<0.001). Se ha demostrado que los hombres tienen una mayor incidencia de LMB después del tratamiento. En conclusión, el presente estudio mostró que la placa dental visible y las lesiones de manchas blancas aumentaron significativamente durante el tratamiento de ortodoncia. Teniendo en cuenta la relación entre la salud bucal y el tratamiento de ortodoncia, los médicos y los pacientes deben conocer los riesgos y tomar precauciones.

Effect of drops containing Lactobacillus reuteri (DSM 17938 and ATCC PTA 5289) on plaque acidogenicity and other caries-related variables in orthodontic patients.

BACKGROUND: The purpose of the study was to investigate the effect of probiotics on biofilm acidogenicity and on the number of salivary Streptococcus mutans and lactobacilli in orthodontic patients. METHODS: This RCT was conducted on 28 young adults who were undergoing orthodontic treatment. The short-term prospective clinical trial lasted for three weeks. The test group rinsed daily with drops containing two Lactobacillus reuteri strains diluted in water, while the placebo group used drops without probiotics. The subjects were enrolled eight months since the beginning of orthodontic treatment. Plaque-pH, saliva and dental biofilm samples were obtained at baseline, one week and three weeks post intervention. RESULTS: Twenty-seven subjects successfully completed the trial period, only one drop out in the test group. No side effects were reported. A statistically significant increase in plaque pH at three weeks post-intervention was found for the test group (p < 0.05), while insignificant changes in the pH value were found for the placebo group in comparison to baseline (p > 0.05). In addition, the AUC7.0 showed a significant difference at three weeks between the test and placebo (p = 0.00002). The three-week samples of stimulated whole saliva showed a statistically insignificant difference in the number of S. mutans and lactobacilli between the two groups (p > 0.05). The qPCR analysis showed the ability of the two strains to get colonized in the dental biofilm without a significant effect on the microbial counts. CONCLUSION/CLINICAL IMPLICATIONS: A mixture of Lactobacillus reuteri has the ability to reduce the pH fall at the three-week follow-up. However, the short-term use of probiotics does not appear to have an effect on the number of salivary Streptococcus mutans and lactobacilli in saliva and on the dental biofilm. TRIAL REGISTRATION: Clinicaltrial.gov (Identifier: NCT04593017 / (19/10/2020)).

Ultra short time to Echo (UTE) MRI for cephalometric analysis-Potential of an x-ray free fast cephalometric projection technique.

OBJECTIVES: A novel magnetic resonance imaging (MRI) scan protocol is presented on the basis of ultra-short time to echo (UTE). By this MRI cephalometric projections (MCPs) can be acquired without the need of post processing in one shot. Different technical parameterizations of the protocol are performed. Their impact on the performance of MCPs is evaluated in comparison to the gold standard-the lateral cephalometric radiography (LCR) for cephalometric analysis (CA) in orthodontics. METHODS: Seven MCPs with various scan parameters influencing the scan duration and one LCR are used from one subject. 40 expert assessors performed CA for 14 predefined cephalometric landmarks. Relative metric distances and absolute angular measurements were calculated. Statistical analysis is presented and the deviations are highlighted to demonstrate the potential of the method for further analysis. RESULTS: The MCPs are acquired in 5-154 seconds, depending on resolution and contrast. Mean relative distances were 2.4-2.7 mm in MCPs and 1.6 mm in LCR, which demonstrate the accuracy and level of agreement of the expert assessors in identifying anatomical landmarks. In comparison to other studies, the presented MCP performed similar in angular analysis and demonstrated on average deviation of 1.2° ±1.1° in comparison to LCR. Despite the point articulare (Ar) and the related gonial angle the calculate distances and angles show outcomes in the range of ±2°/2mm. CONCLUSIONS: MCPs can be acquired much faster in comparison to other techniques known from literature for CA. This study demonstrated the potential of the new method and showed first feasible results. Further research is needed to analyze the performance on a broad range of patients.

Satisfacción con el servicio de posortodoncia de la Universidad Santo Tomás según métricas Lean-Six-Sigma / SatisfactionService Post-Orthodontic University Santo Tomas According ToLean-Six-Sigma Metrics

Introducción: La metodología Lean-Six-Sigma es utilizada actualmente en el área de la salud con el objeto de mejorar la calidad y competitividad de los servicios; pero aún no se tienen reportes de su uso en el área de ortodoncia. Objetivo: Determinar la satisfacción posortodoncia por medio de niveles sigma de los pacientes que asisten a una clínica docente-asistencial en Bucaramanga, Colombia. Métodos: Estudio observacional, descriptivo, transversal. La población estuvo constituida por 100 pacientes de ambos sexos, que ya habían concluido el tratamiento de ortodoncia. Se seleccionó toda la población que hubiera finalizado el tratamiento entre julio de 2017 y junio 2018 de acuerdo con criterios de inclusión y exclusión. Se realizó una encuesta telefónica de 17 preguntas y siete dimensiones de satisfacción. La confiabilidad del cuestionario se evaluó con la consistencia interna del cuestionario mediante el alpha de Cronbach en el que se obtuvo 0,87, y para la validez se utilizó el método de Lawshe. Se usó la metodología Lean-Six-Sigma para evaluar la calidad de la satisfacción; se presentan los resultados en porcentaje y niveles sigma. Resultados: La calidad en satisfacción en el servicio fue de 91,27 por ciento (medido convencionalmente) y 1,36 sigmas; en el grupo de 16-19 años fue de 93,6 por ciento y 1,52 sigmas; y para el grupo de más de 27 años, 84,9 por ciento y 1,03 sigmas. El sexo femenino reportó un 88,57 por ciento y 1,2 sigmas, mientras que el masculino, 93,46 por ciento y 1,51 sigmas. Conclusiones: Los resultados de satisfacción en ortodoncia, medidos por métodos convencionales, mostraron porcentajes aceptables, pero mostraron resultados incompetentes al medirse con niveles sigma, lo cual indica que existen problemas ocultos por identificar y que corresponderían a una siguiente investigación(AU)

Introduction: The Lean-Six-Sigma methodology is currently used in the health area in order to improve the quality and competitiveness of services; but there are still no reports of its use in the orthodontic area. Objective : to determine the post-orthodontic satisfaction by means of sigma levels of the patients who attend a teaching-assistance clinic in Bucaramanga, Colombia. Methods: Observational descriptive cross-sectional study. Population: 100 patients (female and male) who finish orthodontic treatment. Sample selection method: the entire population that had completed the treatment between July 2017 and June 2018 was selected according to inclusion and exclusion criteria. A telephone survey of 17 questions and seven dimensions of satisfaction was carried out. The reliability of the questionnaire was evaluated with the internal consistency of the questionnaire by means of the Cronbach's alpha in which 0.87 was obtained, and the Lawshe method was used for validity. The Lean-Six-Sigma methodology was used to assess the quality of satisfaction; Results are presented in percentage and sigma levels. Results: The quality of service satisfaction was 91.27 percent (conventionally measured) and 1.36 sigmas; in the group of 16 to 19 years it was 93.6 percent and 1.52 sigmas; and for the group over 27 years old, 84.9 percent and 1.03 sigma. The female sex reported 88.57 percent and 1.2 sigmas, and the male reported 93.46 percent with 1.51 sigmas. Conclusions: The satisfaction results in orthodontics, measured by conventional methods, showed acceptable percentages, but showed incompetent results when measured with sigma levels, which indicates that there are hidden problems to be identified and that they would correspond to a subsequent investigation(AU)

The effect of genetic polymorphisms on treatment duration following premolar extraction.

To elucidate genetic factors affecting orthodontic treatment duration, we employed targeted next-generation sequencing on DNA from the saliva of 117 patients undergoing orthodontic treatment after premolar extraction. The clinical characteristics of patients are summarized, and the association of clinical variables with treatment duration was assessed. Patients whose treatment duration deviated from the average were classified into an extreme long group or an extreme short group. We identified nine single nucleotide polymorphisms (SNPs) of six genes that significantly differed in the two groups via targeted sequencing. The frequency of the CC genotypes of WNT3A, SPP1 (rs4754, rs9138), and TNFSF11, TT genotype of SPP1 (rs1126616), and GG genotype of SFRP2 was significantly higher in the extreme long group than in the short group. In the extreme short group, the TC genotype of SPP1, AA genotype of P2RX7, CT genotype of TNFSF11, and AG genotype of TNFRSF11A tended to exhibit higher frequency than in the long group. Taken together, we identified genetic polymorphisms related to treatment duration in Korean orthodontic patients undergoing premolar extraction. Our findings could lead to further studies predicting the prolongation of the orthodontic treatment duration, and will be of great aid to patients as well as orthodontists.

Robotic Applications in Orthodontics: Changing the Face of Contemporary Clinical Care.

The last decade (2010-2021) has witnessed the evolution of robotic applications in orthodontics. This review scopes and analyzes published orthodontic literature in eight different domains: (1) robotic dental assistants; (2) robotics in diagnosis and simulation of orthodontic problems; (3) robotics in orthodontic patient education, teaching, and training; (4) wire bending and customized appliance robotics; (5) nanorobots/microrobots for acceleration of tooth movement and for remote monitoring; (6) robotics in maxillofacial surgeries and implant placement; (7) automated aligner production robotics; and (8) TMD rehabilitative robotics. A total of 1,150 records were searched, of which 124 potentially relevant articles were retrieved in full. 87 studies met the selection criteria following screening and were included in the scoping review. The review found that studies pertaining to arch wire bending and customized appliance robots, simulative robots for diagnosis, and surgical robots have been important areas of research in the last decade (32%, 22%, and 16%). Rehabilitative robots and nanorobots are quite promising and have been considerably reported in the orthodontic literature (13%, 9%). On the other hand, assistive robots, automated aligner production robots, and patient robots need more scientific data to be gathered in the future (1%, 1%, and 6%). Technological readiness of different robotic applications in orthodontics was further assessed. The presented eight domains of robotic technologies were assigned to an estimated technological readiness level according to the information given in the publications. Wire bending robots, TMD robots, nanorobots, and aligner production robots have reached the highest levels of technological readiness: 9; diagnostic robots and patient robots reached level 7, whereas surgical robots and assistive robots reached lower levels of readiness: 4 and 3, respectively.