Does the Implementation of Virtual Planning has a Significant Impact on Reducing the Revision Rate in Orthognathic Surgery?

PURPOSE: Conventional orthognathic surgical planning has limitations in accurately transferring the relationship between soft tissue and bone. Virtual planning offers enhanced accuracy and visualization through computer simulation. This study aimed to compare the need for reoperation between patients who underwent conventional and virtual surgical planning for orthognathic surgery. MATERIAL AND METHODS: The study included 352 patients who underwent orthognathic surgery. Reoperation rates and reasons for reoperation were evaluated in patients with conventional model surgery planning (143 patients) and virtual planning (209 patients). RESULTS: The reoperation rate was 7.69% for conventional surgery patients and 3.82% for virtual planning patients. Malocclusion was the most common reason for reoperation in both groups. Bilateral sagittal split ramus osteotomies (BSSO) and genioplasty were the most frequently performed revision procedures. CONCLUSION: Virtual planning in orthognathic surgery may lead to a reduced reoperation rate compared with conventional planning methods. The accuracy, visualization, and interdisciplinary collaboration offered by virtual planning can improve surgical outcomes.

Impact of general anesthesia on postoperative complications in orthognathic surgery: a retrospective comparison of total intravenous anesthesia versus volatile anesthesia.

Orthognathic surgery has a high incidence of postoperative nausea (PON) and vomiting (POV), delaying mobility initiation and postoperative recovery. Bleeding is another risk associated with this surgical procedure. We aimed to compare total intravenous anesthesia (TIVA) and volatile anesthesia in patients undergoing orthognathic surgery in terms of postoperative nausea and vomiting (PONV) incidence and hemodynamic changes. This retrospective study included 82 patients who underwent bilateral sagittal split ramus osteotomies at Saga University Hospital between April 2016 and April 2021. We compared the effects of TIVA and volatile anesthesia on PONV onset after surgery, acute postoperative hemodynamic changes (blood pressure and heart rate), and factors contributing to PONV. PON was significantly lower in the TIVA group than in the volatile anesthesia group. The total dose of fentanyl contributed to the onset of POV, while the onset of PON was associated with low volumes of fluid infusion and urine in the TIVA and volatile anesthesia groups, respectively. Furthermore, post-extubation hemodynamic change was significantly smaller in the TIVA group than in the volatile anesthesia group. Therefore, TIVA could have a reduced risk of PONV and hemodynamic changes in patients undergoing orthognathic surgery. Employing TIVA could mitigate perioperative complications and enhance patient safety.

Volumetric evaluation of osteotomy gap following mandibular bilateral sagittal split osteotomy using a novel semi-automated approach: a pilot study.

OBJECTIVES: To establish an analysis pipeline for the volumetric evaluation of the osteotomy site after bilateral sagittal split osteotomy (BSSO). PATIENTS AND METHODS: Cone-beam computed tomography (CBCT) was performed before, directly after BSSO, and 6-12 months after surgery. Image segmentations of each osteotomy gap data set were performed manually by four physicians and were compared to a semi-automatic segmentation approach. RESULTS: Five patients with a total of ten osteotomy gaps were included. The mean interclass correlation coefficient (ICC) of individual patients was 0.782 and the standard deviation 0.080 when using the manual segmentation approach. However, the mean ICC of the evaluation of anatomical sites and time points separately was 0.214, suggesting a large range of deviation within the manual segmentation of each rater. The standard deviation was 0.355, further highlighting the extent of the variation. In contrast, the semi-automatic approach had a mean ICC of 0.491 and a standard deviation of 0.365, which suggests a relatively higher agreement among the operators compared to the manual segmentation approach. Furthermore, the volume of the osteotomy gap in the semi-automatic approach showed the same tendency in every site as the manual segmentation approach, but with less deviation. CONCLUSION: The semi-automatic approach developed in the present study proved to be valid as a standardised method with high repeatability. Such image analysis methods could help to quantify the progression of bone healing after BSSO and beyond, eventually facilitating the earlier identification of patients with retarded healing.

Improvement of the temporomandibular joint symptoms due to the condylar position change following modified L-shaped intraoral vertico-sagittal ramus osteotomy: a single-center, retrospective study.

PURPOSE: Intraoral vertico-sagittal ramus osteotomy (IVSRO) was first reported by Choung in 1992 as a surgical procedure to decrease postoperative condylar dislocation. In 2017, Iwanaga et al. developed modified L-shaped IVSRO (mIVSRO) to reduce postoperative nerve dysfunction and achieved favorable outcomes. This study aimed to clarify the effect of mIVSRO on changes in temporomandibular joint (TMJ) symptoms and three-dimensional condylar position. METHODS: We conducted a retrospective study of thirty sides in fifteen Japanese adults diagnosed with jaw deformities who underwent mIVSRO and sagittal split ramus osteotomy (SSRO). TMJ symptoms were assessed chronologically, and the condylar long axis and the condylar position were analyzed two- and three-dimensionally using axial cephalograms and cone-beam computed tomography. RESULTS: Postoperative TMJ symptoms improved by 90% (9/10 sides) in the mIVSRO group and by 50% (7/14 sides) in the SSRO group. The mIVSRO group exhibited outward rotation of the condylar long axis, while the SSRO group exhibited inward rotation. Moreover, mIVSRO induced residual anteromedial-inferior deviation of the condyle. The inclination angle of the condylar process was not significantly different between the two procedures pre- and postoperatively. CONCLUSION: These results clearly demonstrated the effect of mIVSRO on symptomatic TMJ. Residual changes in the position of the condyle following mIVSRO may not affect jaw function.

Post-BSSO condylar position stability: a comparison of miniplate and lag screw fixation.

BACKGROUND: This study was conceived to assess the postoperative stability of condylar position following fixation with miniplates and lag screws after bilateral sagittal split osteotomy (BSSO). METHODS: This retrospective study included a cohort of 20 patients undergoing BSSO using the Obwegeser-Dal Pont modification. The bony segments were stabilized using either miniplates with two 2.0-mm monocortical screws per segment or three 2.0-mm bicortical lag screws along the mandible's superior border. Pre- and postoperative (7-day interval) spiral computed tomography scans were conducted to assess skeletal changes across both groups. Data analysis employed Wilcoxon signed-rank and Wilcoxon rank-sum tests (α = 0.05). RESULTS: No statistically significant difference was observed between the pre-and postoperative condylar position parameters (P>0.05). However, the lag screw group showed a marginal significant increase in the left condyle's angulation (preoperative: 24.83 ± 6.37 vs. postoperative: 32.5 ± 4.93; P = 0.04). Changes in condylar height, length, and width were not statistically significant before and after BSSO in either groups (P>0.05). Nor was any statistically significant difference found between the miniplates and lag screws groups regarding condylar position parameters (P>0.05). CONCLUSION: The results indicated that both lag screw and miniplate fixation methods can be effectively employed in BSSO procedures without impacting condylar position parameters. Thus, either fixation method can be chosen depending on factors such as the surgeon's preference and clinical outcomes.

The effect of different hybrid rigid internal fixation techniques on the postoperative stability following a mandibular advancement using a bilateral sagittal split ramus osteotomy: A retrospective three-dimensional comparative study.

OBJECTIVE: To three-dimensionally evaluate post-operative mandibular stability following bilateral sagittal split ramus osteotomies between hybrid and non-hybrid rigid internal fixation techniques. MATERIALS AND METHOD: Seventy adults with skeletal class II deformity who underwent bilateral split sagittal osteotomy with mandibular advancement were included. Patients were divided into four groups based on their fixation techniques: hybrid technique (HT) groups I, II, and IV received a 4-hole 2 mm miniplate with either a bicortical screw (BS), additional 2 mm 4-hole miniplate, or two-hole miniplate, while non-HT group III received a 4-hole 2 mm miniplate with four mini-screws (MS). Measurements were taken pre-operatively (T0), immediately postoperatively (T1), and ≥1 year after surgery (T2) using 3D Slicer software. RESULTS: Age, sex, and follow-up period did not correlate significantly with postoperative relapse or stability. Significant differences were observed in the advancement on the right side between groups II, III, and IV and on the left side between groups I, III, and IV. However, the type of surgical intervention showed no significant effect on postoperative relapse and stability. All groups of fixations showed satisfactory stability with irrelevant relapse (< 2 mm or 2°). CONCLUSION: The study demonstrated satisfactory and comparable stability among different fixation groups on patients undergoing mandibular advancement following bilateral split sagittal osteotomy. The results highlighted the importance of considering the degree of advancement when planning orthognathic surgery and managing postoperative outcomes.

Do Surgical Intervention Type and Baseline Condylar Position Affect Spatial Dimension Changes of the Temporomandibular Joint in the Surgical Correction of Skeletal Class II Deformities?

BACKGROUND: One of the key features of orthognathic surgery is altering temporomandibular joint (TMJ) condylar positions. PURPOSE: This multivariate study aimed to identify surgical interventions and patient factors significantly associated with changes in TMJ spatial dimensions after the surgical correction of skeletal Class II deformities. STUDY DESIGN, SETTING, SAMPLE: This is a retrospective cohort study including patients who had undergone an isolated bilateral sagittal split ramus osteotomy (BSSO) or a bimaxillary osteotomy (BMO) for mandibular advancement and a control sample of patients treated with the removal of odontogenic cysts in the mandibular posterior region. Excluded were those who presented with specific radiographic signs of TMJ osteoarthrosis, severe facial asymmetry, or deformity secondary to trauma. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLE: The primary predictors were condylar position at baseline (anterior, concentric, and posterior), time points (T0, preoperatively; T1, immediately after surgery; and T2, 1-year follow-up), and surgical intervention type (BSSO, BMO, and control group). MAIN OUTCOME VARIABLES: The primary outcomes were changes in posterior spatial dimension (PSD), superior spatial dimension, and medial spatial dimension assessed by cone-beam computed tomography preoperatively, immediately after surgery, and at 1-year follow-up. COVARIATES: Covariates included sex, age, and amount of mandibular advancement. ANALYSES: Estimations of independent effects of primary predictors on outcome variables were made by applying generalized estimation equation models. The value of statistical significance was P < .05. RESULTS: The study sample included 88 participants. The BSSO samples included 39 patients, and the BMO group included 22 patients; the control group comprised 27 subjects. The average age was 31.2 years; the majority were female (61.4%). Adjusted generalized estimation equation models yielded a significant time interaction between BSSO and spatial dimensions over time (PSD, P < .001). Key predictors of spatial dimension changes were the baseline posterior (PSD, P < .001) and the central condylar position (PSD, P < .001). CONCLUSION AND RELEVANCE: This controlled study, for the first time, provides scientific evidence on the effects of surgical intervention type and baseline condylar position on spatial dimension changes in the TMJ. It shows a more favorable outcome in long-term spatial dimension changes for patients treated by a BMO procedure.

Pulsed electromagnetic fields (PEMF) as a valid tool in orthognathic surgery to reduce post-operative pain and swelling: a prospective study.

PURPOSE: PEMF (pulsed electromagnetic fields) founds application in several medical fields to accelerate bone wounds healing and to reduce inflammation. The aim of our study was to evaluate the effectiveness of PEMF in reducing postoperative swelling and pain in patients undergoing orthognathic surgery. METHODS: A prospective observational monocentric study was conducted on a sample of 30 patients undergone to orthognathic surgery in Maxillofacial Surgery Unit of University of Naples Federico II. The patients who followed these inclusion criteria were enrolled in the study: age ≥ 18 years, Class III malocclusion, Surgical procedure of Le Fort I osteotomy + Bilateral Sagittal Split Osteotomy (BSSO), Written informed consent. Patients were divided into two groups: Group SD) postoperative standard treatment with medical therapy and cryotherapy, Group SD + PEMF) postoperative standard therapy + PEMF. Each patient underwent a 3D facial scan, at one (1d) and four (4d) days after surgery to compare the swelling reduction. The pain score was assessed through VAS score and analgesics administration amount. RESULTS: In SD + PEMF group, the facial volume reduction between 1d and 4d scan was on average 56.2 ml (6.23%), while in SD group, it was 23.6 ml (2.63%). The difference between the two groups was 3.6% (p = 0.0168). VAS pain values were significantly higher in SD group compared to SD + PEMF group in the second day after surgery (P = 0.021) and in the total 4 days (P = 0.008). CONCLUSIONS: Our data suggest that PEMF is valid tool to promote faster postoperative swelling and pain reduction in patients undergoing orthognathic surgery.

Change in taste sensation after orthognathic surgery.

OBJECTIVE: The objective of this study was to evaluate the effect of orthognathic surgery on taste sensation. MATERIALS AND METHODS: Thirty-five patients scheduled to undergo Le Fort I osteotomy (LFIO), sagittal split ramus osteotomy (SSRO), and bimaxillary surgery (BMS) were evaluated by administering localized and whole-mouth taste tests preoperatively and postoperatively at months 1, 3, and 6. The patients were asked to identify the quality of four basic tastes applied to six locations on the palate and tongue and to rate the taste intensities they perceived. Taste recognition thresholds and taste intesity scores were evaluted according to operation groups and follow-ups. RESULTS: There were significant decreases in the quinine HCl recognition thresholds at the postoperative follow-ups compared to the preoperative in LFIO patients (p = 0.043). There were significant decreases in sucrose taste intensity scores in the right posterolateral part of the tongue at months 3 and 6 compared to preoperative in SSRO patients (p = 0.046), and significant increases in quinine HCL taste intensity scores in the right and left anterior parts of the tongue at month 6 compared to preoperative in LFIO patients (p < 0.05). CONCLUSION: Taste perception is affected due to potential damage to the chemosensory nerves during orthognathic surgical procedures. Generally, non-significant alterations have been observed in taste perception after orthognathic surgery, except for significant alterations in bitter and sweet taste perceptions. CLINICAL RELEVANCE: Maxillofacial surgeons should be aware of taste perception change after orthognathic surgery procedures and patients should be informed accordingly. THE TRIAL REGISTRATION NUMBER (TRN): NCT06103422/Date of registration: 10.17.2023 (retrospectively registered).

The TSAR-osteotomy, a total subapical and ramus osteotomy: A technical note.

There are several treatment options to treat a class II dentofacial deformity with a pronounced chin. A total subapical osteotomy is one of these options. This type of osteotomy was refined to total subapical and ramus (TSAR) osteotomy. In this technical note, a detailed and schematic presentation of the TSAR osteotomy is presented step by step. The surgical approach to the TSAR osteotomy is divided into three parts. The first part consists of the horizontal osteotomy at the level of the ramus, the second part approaches the corticotomy to release and protect the mental nerve and the third part consists of connecting the horizontal ramus osteotomy and the local corticotomy around the mental nerve. In this third part, it is important that the inferior alveolar nerve (IAN) is actively sought and protected.

Which factors affect the lingual fracture pattern in sagittal split ramus osteotomy?

The purpose of this study was to elucidate the effects of mandibular anatomy and osteotomy technique on lingual fracture patterns in SSRO. The predictor variables were: length of horizontal medial osteotomy; type of border osteotomy; buccolingual width; and vertical length of the basal cortex. The outcome variable was the type of lingual split pattern. This was categorized into four types according to a lingual split scale (LSS): LSS 1, true Hunsuck; LSS 2, fracture line to posterior border of the ramus; LSS 3, through to mandibular canal; LSS 4, unfavorable fracture pattern. Data were analyzed using analysis of variance and the Pearson χ2 test. Values of p < 0.05 were considered statistically significant. The study sample comprised 312 lingual split patterns in 156 patients. The most common type of lingual split pattern was LSS 1 (n = 204). There was a significant relationship between inferior border osteotomy type and LSS type (p = 0.001). Whilst LSS 1 was the most common among all border osteotomy types. LSS 4 was most frequently observed in cases where the lower border osteotomy remained in the buccal surface. According to the results of this study, the likelihood of an unfavorable split pattern increases when the lower border osteotomy remains in the buccal surface.

Maxillary bone healing and CT value after Le Fort I osteotomy using absorbable plate system: A retrospective study.

This study aimed to evaluate maxillary bone healing and computed tomography (CT) values after Le Fort I osteotomy with sagittal split ramus osteotomy in patients with class II and III malocclusion. Four absorbable plates and screws were used to fix the maxillary segments in all patients. For 112 sides (58 patients), the bone defect areas at the anterior and posterior sites between the maxillary segments were measured using 3-dimensional CT views reconstructed over a constant CT value at 1 week and 1 year postoperatively. Subsequently, CT values at the upper, middle, and lower sites around the osteotomy line in the medial, middle, and lateral regions were measured. The bone defect area after 1 year increased at the anterior site in class III and at both the anterior and posterior sites in class II (P < 0.05). This study suggests that the increase in bone defect area was affected by lower CT values at the middle site of the middle and lateral regions in class II, and that bony defects between fragments in the maxilla could partially remain in both classes II and III within 1 year after Le Fort I osteotomy.

Does adjunctive fixation in conjunction with miniplate affect condylar position and morphology after mandibular advancement through bilateral sagittal split ramus osteotomy? A retrospective 3-dimensional CT comparative study.

To minimize condylar positional and morphological changes after mandibular advancement through bilateral sagittal split ramus osteotomy (BSSRO), surgeons add either a bicortical screw or a two-hole plate distal to the conventional single miniplate. Since there have been no previous studies investigating the effect of this combination, our study aimed to evaluate the short- and long-term effects of these adjunctive fixation methods (AFM) on condylar positional and morphological changes after mandibular advancement through BSSRO. This retrospective cohort study included consecutive patients with retruded mandibles who were treated in the Department of Orthognathic and TMJ Surgery at West China Hospital of Stomatology, Sichuan University. The patients were divided into two groups based on the primary predictor variable, which was the addition of AFM - either a single bicortical screw or a two-hole plate in addition to the single miniplate. The primary outcome variable was the condylar positional and morphological changes after mandibular advancement through BSSRO. Three-dimensional facial CT scans were obtained at three different time points (preoperatively - T0, 1 week postoperatively - T1, and 1 year postoperatively - T2) and analyzed using ITK-SNAP, 3D Slicer, and SlicerSALT software. Intergroup comparisons were conducted with an independent t-test, with a p-value of <0.05 considered significant. Correlations between the variables were estimated by Pearson correlation. The study comprised 51 patients (32 females, 19 males; mean age 25.13 ± 4.24 years), involving a total of 81 condyles (21 unilateral and 60 bilateral). There was a significant difference in long-term condylar displacement in favor of AFM along with a single miniplate (p < 0.001). The bicortical screw group recorded less condylar displacement than the two-hole plate group horizontally (0.11 mm vs 0.22 mm) and sagittally (0.03 mm vs 0.17 mm), but more vertically (0.85 mm vs 0.03 mm). Bone formation associated with AFM occurred on all condylar surfaces, compared with only three surfaces in the single miniplate group. The adjunctive method in addition to the single miniplate fixation method showed less condylar displacement and more bone apposition after mandibular advancement through BSSRO. The follow-up duration variable was the only significant determinant for volumetric changes in the condyle.

The Evaluation of Condylar Position Change in the Asymmetric Mandible Following Sagittal Split Osteotomy.

BACKGROUND: The change of condyle position following orthognathic surgery affects the stability of treatments. This study aims to assess the correlation between the amount of condyles' position change and the severity of mandibular asymmetry following BSSO. MATERIALS AND METHODS: This is a cross-sectional study. Subjects with asymmetric mandibular prognathism following BSSO were studied. Subjects were classified into 2 groups: group 1, subjects had mandibular asymmetry without occlusal cant and underwent BSSO. Group 2, subjects had mandibular asymmetry with occlusal cant and underwent BSSO+ Lefort I osteotomy. The condyle position was evaluated using cone-beam computer tomography (CBCT). Pearson's correlation test was used to assess any correlation between the condyle changes and the change in the mandible in sagittal and anterior-posterior directions. RESULTS: A total of 44 subjects were studied. In group 1, the condyle tilted outward in the deviated condyle and inward in the non-deviated condyle immediately after osteotomy. After 12 months, both condyles showed a rotation relative to the original position. In group 2, the condyles of the deviated sides and non-deviated sides moved inferiorly after surgery (condylar sagging), which was more significant in the non-deviated sides. The condyle rotation was similar to group 1. The severity of asymmetry and occlusal cant correlate with the condylar position change in the two groups. CONCLUSION: The severity of mandibular asymmetry correlates with the amount of condyles' position change immediately after BSSO. However, the condyles tend to return to their original position 12 months later.

Prevalence of lingual sensory impairment following bilateral sagittal split osteotomy: a systematic review and meta-analysis.

PURPOSE: Our study aims to estimate the prevalence of lingual nerve injury following bilateral sagittal split osteotomy (BSSO). METHODS: Two reviewers independently conducted a systematic literature search in the Medline and Scopus databases. The pooled prevalence with 95% confidence intervals (CI) was estimated, and quality assessment, outlier analysis, and influential analysis were performed. RESULTS: In total, eleven eligible studies comprising a total of 1,882 participants were included in this meta-analysis. One study was identified as critically influential. The overall prevalence of lingual sensory impairment was estimated to be as high as 0.1% (95% CI 0.0%-0.6%) with moderate heterogeneity observed between studies. CONCLUSION: It is important for healthcare professionals to be aware of this issue, despite the relatively low rate of lingual nerve deficit after BSSO. Additional research will provide a more comprehensive understanding of the underlying factors contributing to lingual nerve injury, leading to improved preventive measures and treatment strategies. Furthermore, insights gained from future studies will enable healthcare professionals to inform patients about the potential complications and manage their expectations before undergoing BSSO.

Mandibular Body Osteotomy Combined with Sagittal Split Ramus Osteotomy for the Treatment of Severe Skeletal Class â ¢ Malocclusion with Ankylosed Teeth.

This study presents a combination of 2 different surgery procedures performed on the mandible as part of the treatment aiming to improve the facial profile and occlusal function of patients with severe skeletal class Ⅲ malocclusion and bilateral edentulous gaps. The teeth next to the edentulous gaps were found to be ankylosed. Mandibular setback by bilateral sagittal split ramus osteotomies and mandibular body osteotomies, combined with Le Fort Ⅰ level maxillary advancement were performed, since the chief complaint of the patient was a concave profile. As a result, the skeletal class Ⅲ malocclusion had been corrected, a satisfying facial profile had been achieved, and no apparent adverse effect was found. Thus, it has been proved that the combination of sagittal split ramus osteotomy and mandibular body osteotomy is available for correcting skeletal class Ⅲ malocclusion.

Effect of Orthognathic Surgery On Pulp Blood Flow and Pulp Sensibility: A Prospective Control Trial.

INTRODUCTION: Orthognathic surgery has the potential to compromise the vitality of the teeth. This paper aims to assess changes in pulp blood flow (PBF) and pulp sensibility (PS) of the anterior dentition following orthognathic surgery and to assess the influence of the proximity of the surgical osteotomy on the PBF and/or PS. METHODS: Twenty-six patients undergoing orthognathic surgery (Le Fort I or bilateral sagittal split osteotomy [BSSO]) were compared to sixteen control patients treated by fixed appliances only using Laser Doppler flowmeter (LDF) and thermal testing (CO2 snow). Surgery patients were tested at T1 (presurgery), T2 (4-5 weeks postsurgery), T3 (3 months postsurgery), and T4 (6 months postsurgery). Control patients were tested at T1 (pretreatment), T2 (6 months posttreatment), T3 (12 months posttreatment), and T4 (18 months posttreatment). Differences between the maxilla and mandible were assessed. RESULTS: No differences in PBF or PS were recorded in the control group. In the surgery group, both jaws followed the same pattern after surgery, an initial decrease at T2 followed by a gradual recovery to pretreatment PBF levels with no significant difference between T1 versus T4 in both jaws. No difference in PBF was observed between the maxilla and mandible at any testing time interval. CONCLUSIONS AND CLINICAL IMPLICATIONS: PBF and PS of the anterior dentition was severely affected immediately postsurgery, followed by a gradual increase to full recovery. This pattern of recovery was exhibited in both jaws. A negative sensibility response or discoloration should not be seen as an indication of irreversible ischemic pulp changes. Monitoring for at least 6 months or using LDF as a confirmatory test is required before any irreversible endodontic treatment is to be considered.

Comparative Analysis of Temperature-Responsive Hydrogel (PF 72) for Postoperative Pain After Bimaxillary Surgery: A Retro-spective Study.

Bimaxillary surgery is a painful invasive procedure in plastic surgery. Pain control is typically achieved using intravenous analgesics. We aimed to investigate the efficacy of a novel temperature-responsive hydrogel, PF72, mixed with ropivacaine, as a local pain management solution when applied directly to the surgical site following orthognathic surgery. The study was conducted from October 2022 to July 2023 and included a cohort of 40 candidates for orthognathic surgery, encompassing LeFort I maxillary ostectomy and sagittal split ramus osteotomy. The participants were divided into an Injection group (n = 20), where PF72 was administered at the surgical site before the orthognathic surgery, and a Control group (n = 20), which relied solely on intravenous analgesics. Pain was evaluated at 3, 6, 24, 48, and 72 h after surgery using a numerical rating scale (NRS). The mean NRS scores at 24 h were 6.35 and 4 for the Control and Injection groups, respectively. The mean NRS scores at 72 h were 3.4 and 2.55 for the Control and Injection groups, respectively. Patients who received PF72 experienced less pain than those who received intravenous analgesics. These findings underscore the potential of PF72 as an effective alternative for enhancing pain management in patients undergoing orthognathic surgery.Level of Evidence III Therapeutic study. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Validation of a fully automatic three-dimensional assessment of orthognathic surgery.

The aim of the present study was to propose and validate FAST3D: a fully automatic three-dimensional (3D) assessment of the surgical accuracy and the long-term skeletal stability of orthognathic surgery. To validate FAST3D, the agreement between FAST3D and a validated state-of-the-art semi-automatic method was calculated by intra-class correlation coefficients (ICC) at a 95 % confidence interval. A one-sided hypothesis test was performed to evaluate whether the absolute discrepancy between the measurements produced by the two methods was statistically significantly below a clinically relevant error margin of 0.5 mm. Ten subjects (six male, four female; mean age 24.4 years), class II and III, who underwent a combined three-piece Le Fort I osteotomy, bilateral sagittal split osteotomy and genioplasty, were included in the validation study. The agreement between the two methods was excellent for all measurements, ICC range (0.85-1.00), and fair for the rotational stability of the chin, ICC = 0.54. The absolute discrepancy for all measurements was statistically significantly lower than the clinical relevant error margin (p < 0.008). Within the limitations of the present validation study, FAST3D demonstrated to be reliable and may be adopted whenever appropriate in order to reduce the work load of the medical staff.