RESUMEN
The work describes the results of the first application of 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L) for the recovery of noble metal ions (Au(III), Ag(I), Pd(II), Pt(II)) from aqueous solutions using two different separation processes: dynamic (classic solvent extraction) and static (polymer membranes). The stability constants of the complexes formed by the L with noble metal ions were determined using the spectrophotometry method. The results of the performed experiments clearly show that 2,6-bis(4-methoxybenzoyl)-diaminopyridine is an excellent extractant, as the recovery was over 99% for all studied noble metal ions. The efficiency of 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier in polymer membranes after 24 h of sorption was lower; the percentage of metal ions removal from the solutions (%Rs) decreased in following order: Ag(I) (94.89%) > Au(III) (63.46%) > Pt(II) (38.99%) > Pd(II) (23.82%). The results of the desorption processes carried out showed that the highest percentage of recovery was observed for gold and silver ions (over 96%) after 48 h. The results presented in this study indicate the potential practical applicability of 2,6-bis(4-methoxybenzoyl)-diaminopyridine in the solvent extraction and polymer membrane separation of noble metal ions from aqueous solutions (e.g., obtained as a result of WEEE leaching or industrial wastewater).
Asunto(s)
Cationes/aislamiento & purificación , Metales Pesados/aislamiento & purificación , Cationes/química , Oro/aislamiento & purificación , Metales Pesados/química , Paladio/aislamiento & purificación , Platino (Metal)/aislamiento & purificación , Plata/aislamiento & purificaciónRESUMEN
Discharge of heavy metals from various sources of industrial wastewater poses significant environmental and health concerns. Thus, efficient recovery of precious metals from wastewater employing sustainable, rapid, and cost-effective treatment methods is highly desirable. In this work, palladium nanoparticles (Pd NPs) were successfully recovered from industrial wastewater using a pulsed laser process in the absence of additives or reducing agents. Notably, the developed approach is faster and more environmentally friendly than other conventional recovery methods. The recovered Pd NPs were characterized by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and inductively coupled plasma optical emission spectroscopy (ICP-OES). Various pulsed laser parameters (i.e., laser wavelength, power, and irradiation time) were optimized to obtain ideal conditions for the pulsed laser ablation process. Effective recovery of the Pd metal from industrial wastewater was achieved at a laser wavelength of 355 nm, power of 40 mJ/pulse, and irradiation time of 30 min. The Pd NPs exhibited excellent catalytic activity toward the reduction of 4-nitrophenol. Thus, the recovered materials showed remarkable potential for application in degradation of toxic aromatic nitro compounds in the environment.
Asunto(s)
Nanopartículas del Metal/química , Nitrofenoles/química , Paladio/química , Eliminación de Residuos Líquidos/métodos , Catálisis , Rayos Láser , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Oxidación-Reducción , Paladio/aislamiento & purificación , Aguas Residuales/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Difracción de Rayos XRESUMEN
Chitosan (CS), synthesized from chitin chemically extracted from shrimp shells, was used for the synthesis of magnetic chitosan nanoparticles (Fe3O4-CSN), which makes the adsorbent easier to separate. Fe3O4-CSN was used for the removal of toxic metals such as vanadium (V(V)) and palladium (Pd(II)) ions from aqueous solutions. Influencing factors on the adsorption process such as pH, contact time, adsorbent dosage, and agitation speed were investigated. A competitive adsorption of V(V) and Pd(II) ions for the active sites was also studied. The monolayer maximum adsorption capacities (Qm) of 186.6 and 192.3 mg/g were obtained for V(V) and Pd(II) ions, respectively. The pseudo-second-order equation gave the best fit for the kinetic data, implying that chemisorption was the determining step. Freundlich model yielded a much better fit than the other adsorption models assessed (Langmuir, Temkin and Dubinin-Radushkevich). Thus, the adsorption of V(V) and Pd(II) ions onto Fe3O4-CSN is a combination of physical and chemical adsorption, as based on the kinetics and equilibrium study. Generally, physical adsorption is the mechanism that governs the system, while chemical adsorption is the slowest adsorption step that takes place. Thermodynamic studies displayed that the adsorption process was exothermic and spontaneous. Removal efficiencies of 99.9% for V(V) and 92.3% for Pd(II) ions were achieved, implying that Fe3O4-CSN adsorbent had an excellent ability for the removal of the metal ions from real industrial wastewaters without remarkable matrix effect. Graphical abstract á .
Asunto(s)
Quitosano/química , Nanopartículas/química , Paladio/aislamiento & purificación , Vanadio/aislamiento & purificación , Contaminantes Químicos del Agua/aislamiento & purificación , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Magnetismo , Paladio/química , Termodinámica , Vanadio/química , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/química , Purificación del Agua/métodosRESUMEN
A method was modified for the preconcentration of platinum (Pt), palladium (Pd) and rhodium (Rh) from seawater by a solid phase extraction using a commercially available resin Nobias-chelate PA1®. All the determination was conducted using inductively coupled plasma mass spectrometry (ICP-MS) which had a low detection limit for Pt, Pd and Rh, about 16.53, 16.41 and 26.88â¯pgâ¯L-1, respectively. It was found that the adsorption performance of the resin was closely related to the matrix, ligands and pH of the samples. Significant difference in recovery was found in various samples: seawaterâ¯≈â¯artificial seawaterâ¯>â¯ultra-pure deionized water. This method had low method blank in the range of 5.51-8.89â¯pgâ¯L-1 and high enrichment factor of up to 180-200. The recoveries of Pt and Pd were 93⯱â¯4.2% in the spiked real seawater. However, the recovery of Rh on the resin was below 70% but stable in the range of 65-68%. It indicated that the Rh recovery seemed to be reproducible and higher volumes of seawater must be processed in order to obtain the lower limit of quantification and excellent recovery.
Asunto(s)
Espectrometría de Masas/métodos , Paladio/análisis , Platino (Metal)/análisis , Rodio/análisis , Agua de Mar/análisis , Extracción en Fase Sólida/métodos , Límite de Detección , Paladio/aislamiento & purificación , Platino (Metal)/aislamiento & purificación , Rodio/aislamiento & purificación , Agua de Mar/químicaRESUMEN
Conventional separation methods are not suitable for recovering palladium present in low concentrations in ore leaching solutions. In this study, a novel isopentyl sulfide (S201)-impregnated α-MnO2 nanorod adsorbent (BISIN) was prepared, characterized, and applied for the selective adsorption and separation of palladium from the leaching liquor of ores. Batch studies were carried out, and the main adsorption parameters were systematically investigated, in addition to the relevant thermodynamic parameters, isotherms, and kinetic models. The thermodynamic parameters reflected the endothermic and spontaneous nature of the adsorption. Moreover, the experimental results indicated that the Langmuir isotherm model fits the palladium adsorption data well and the adsorption was well described by the pseudo-second-order kinetic model. The main adsorption mechanisms of palladium were elucidated at the molecular level by X-ray crystal structure analysis. Thiourea was found to be an excellent desorption agent, and the palladium-thiourea complex was also confirmed by X-ray crystal structure analysis. The results indicated that almost all of the Pd(II) (>99.0%) is adsorbed on BISIN, whereas less than 2% of the adsorbed Pt(IV), Fe3+, Cu2+, Ni2+, and Co2+ is observed under the optimum conditions. The proposed method can be used for the efficient adsorption and separation of palladium from the leaching liquor of ores.
Asunto(s)
Compuestos de Manganeso/química , Minería , Nanopartículas/química , Óxidos/química , Paladio/aislamiento & purificación , Sulfuros/química , Contaminantes Químicos del Agua/aislamiento & purificación , Adsorción , Cristalografía por Rayos X , Concentración de Iones de Hidrógeno , Cinética , Nanopartículas/ultraestructura , Nitrógeno/química , Porosidad , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , Factores de Tiempo , Difracción de Rayos XRESUMEN
Deliberating upon the role of solution chemistry in influencing the Pd(II) adsorption and desorption characteristics using chitosan based resins, this work addresses the competence of glutaraldehyde cross-linked chitosan (GCC) co-polymer resin for the removal and recovery of Pd(II) from synthetic electroless plating solutions. GCC copolymer adsorbent was prepared by grafting of fixed weight ratio (1/17) of medium molecular weight chitosan and glutaraldehyde (25% in H2O). Within the adsorption parametric range of 2-10pH, 60-300min contact time, 10-50mg adsorbent dosage and 50-500mg/L initial Pd(II) concentration, the solution chemistry associated to synthetic ELP solution has been evaluated to strongly reduce the adsorption capacity of the GCC resin. Batch equilibrium adsorption studies inferred upon the fitness of Langmuir isotherm with a monolayer adsorption capacity of 166.67mg/g. Adsorption kinetics and thermodynamic parametric evaluations affirmed pseudo-second-order kinetics and spontaneous exothermic Pd(II) adsorption on the resin. Further, speciation analysis provided valuable insights by indicating greater favourability of Pd(NH3)42+ species (at pH=8) than PdEDTA-2 (at lower pH) to foster chemisorption with the GCC resin. In summary, the observations affirmed that solution chemistry needs to be addressed in laboratory investigations to further industrial application and competitiveness of alternate resins.
Asunto(s)
Quitosano/química , Reactivos de Enlaces Cruzados/química , Glutaral/química , Paladio/química , Adsorción , Cinética , Paladio/aislamiento & purificación , Soluciones , Tensoactivos/químicaRESUMEN
By using Enterococcus faecalis Z5 strain (CCTCC M2012445) as a microbial resource, this study explored the possibility of recovering palladium (Pd) in the form of nanoparticles by adding an electron donor; investigated the Pd biorecovery efficiency of three kinds of simulated wastewaters including industrial waste processing leachates (IW) , printed circuit board scrap (PCBS) , and spent automotive catalyst (SAC); and analyzed the effect of other metal ions contained in simulated wastewater on Pd biorecovery efficiency. The results showed that the E. faecalis Z5 could recover Pd(â ¡) as palladium nanoparticles from the three simulated wastewaters. X-ray diffraction and transmission electron microscopy analysis indicated that the recovered product was Pd nanoparticles that were about 10 nm in size and mainly distributed in the periplasm of the cells. The order of Pd(â ¡) biorecovery efficiency from the three kinds of wastewaters was IW> SAC> PCBS. The biosorption efficiencies for IW, SAC, and PCBS were 99.8% (6 h), 99.7% (8 h), and 90.3% (12 h), respectively, and the bioreduction efficiencies were 99.9% (4 h), 99.9% (6 h), and 80.4% (36 h). Other metal ions contained in the simulated wastewaters such as Pt(â £), Au(â ¢), Ag(â ), Cu(â ¡), and Fe(â ¡) affected both the biosorption and bioreduction processes. The degree of matrix effects on the Pd(â ¡) bioreduction efficiency were in the order Au(â ¢)> Pt(â £)> Cu(â ¡)> Ag(â )> Fe(â ¡). Further doping the recovered Pd nanoparticles with ferriferous oxide enabled the products to catalyze the degradation of methylene blue in heterogeneous Fenton reactions, which showed 96.7% degradation rate of methyl blue within 80 min.
Asunto(s)
Enterococcus faecalis/metabolismo , Azul de Metileno/química , Paladio/aislamiento & purificación , Aguas Residuales/química , Catálisis , Residuos Industriales , Nanopartículas del MetalRESUMEN
The demand for precious metals has increased in recent years. However, low concentrations of precious metals dissolved in wastewater are yet to be recovered because of high operation costs and technical problems. The unicellular red alga, Galdieria sulphuraria, efficiently absorbs precious metals through biosorption. In this study, over 90% of gold and palladium could be selectively recovered from aqua regia-based metal wastewater by using G. sulphuraria. These metals were eluted from the cells into ammonium solutions containing 0.2M ammonium salts without other contaminating metals. The use of G. sulphuraria is an eco-friendly and cost-effective way of recovering low concentrations of gold and palladium discarded in metal wastewater.
Asunto(s)
Oro/aislamiento & purificación , Paladio/aislamiento & purificación , Rhodophyta , Aguas Residuales/química , Purificación del Agua/métodos , IonesRESUMEN
In this work, a selective Pd(II) ions chelating resin based on 2-aminobenzaldehyde modified chitosan Schiff's base (Pd-CAZ) was synthesized through ion-imprinting technique. All the performed chemical and morphological changes during the modification and Pd(II) ion-imprinting process were investigated using instrumental techniques including FTIR, (1)H NMR, XRD and SEM. In addition, the mechanism of Pd(II) binding to the synthesized polymeric active sites was elucidated using both XPS and FTIR spectra, and the results indicated that Pd(II) ions coordinated in square planar geometry. Also, the selective extraction experiments with respect to Pd-CAZ and control non-imprinted NI-CAZ resins were performed to obtain the fundamental thermodynamic, kinetic and isotherm parameters. In all cases the adsorption was endothermic, spontaneous, fit well with pseudo-second order kinetic model and Langmuir adsorption isotherm model with maximum adsorption capacities of 275±0.4 and 114±0.2 mg/g for Pd-CAZ and NI-CAZ, respectively. Moreover, the regeneration and recovery experiments indicated that the resin maintain about 96% of its original activity after the fifth adsorption-desorption cycle, revealing the high economic value.
Asunto(s)
Quitosano/química , Paladio/aislamiento & purificación , Resinas Sintéticas/química , Adsorción , Benzaldehídos/química , Concentración de Iones de Hidrógeno , Iones/química , Iones/aislamiento & purificación , Cinética , Estructura Molecular , Paladio/química , Tamaño de la Partícula , Bases de Schiff/química , Propiedades de Superficie , TermodinámicaRESUMEN
Recovering palladium (Pd) from waste streams opens up the possibility of augmenting the supply of this important catalyst. We evaluated Pd reduction and recovery as a novel application of a H2-based membrane biofilm reactor (MBfR). At steady states, over 99% of the input soluble Pd(II) was reduced through concomitant enzymatic and autocatalytic processes at acidic or near neutral pHs. Nanoparticulate Pd(0), at an average crystallite size of 10 nm, was recovered with minimal leaching and heterogeneously associated with microbial cells and extracellular polymeric substances in the biofilm. The dominant phylotypes potentially responsible for Pd(II) reduction at circumneutral pH were denitrifying ß-proteobacteria mainly consisting of the family Rhodocyclaceae. Though greatly shifted by acidic pH, the biofilm microbial community largely bounced back when the pH was returned to 7 within 2 weeks. These discoveries infer that the biofilm was capable of rapid adaptive evolution to stressed environmental change, and facilitated Pd recovery in versatile ways. This study demonstrates the promise of effective microbially driven Pd recovery in a single MBfR system that could be applied for the treatment of the waste streams, and it documents the role of biofilms in this reduction and recovery process.
Asunto(s)
Reactores Biológicos/microbiología , Nanopartículas/química , Paladio/aislamiento & purificación , Administración de Residuos/métodos , Betaproteobacteria/metabolismo , Biopelículas , Desnitrificación , Diseño de Equipo , Concentración de Iones de Hidrógeno , Consorcios Microbianos/fisiología , Oxidación-Reducción , Paladio/química , Rhodocyclaceae/metabolismo , Administración de Residuos/instrumentaciónRESUMEN
This is the first report that demonstrates the ability of anaerobic methanogenic granular sludge to reduce Pd(II) to Pd(0). Different electron donors were evaluated for their effectiveness in promoting Pd reduction. Formate and H2 fostered both chemically and biologically mediated Pd reduction. Ethanol only promoted the reduction of Pd(II) under biotic conditions and the reduction was likely mediated by H2 released from ethanol fermentation. No reduction was observed in biotic or abiotic assays with all other substrates tested (acetate, lactate and pyruvate) although a large fraction of the total Pd was removed from the liquid medium likely due to biosorption. Pd(II) displayed severe inhibition towards acetoclastic and hydrogenotrophic methanogens, as indicated by 50% inhibiting concentrations as low as 0.96 and 2.7 mg/L, respectively. The results obtained indicate the potential of utilizing anaerobic granular sludge bioreactor technology as a practical and promising option for Pd(II) reduction and recovery offering advantages over pure cultures.
Asunto(s)
Metano/biosíntesis , Paladio/aislamiento & purificación , Paladio/metabolismo , Aguas del Alcantarillado/microbiología , Anaerobiosis/efectos de los fármacos , Reactores Biológicos/microbiología , Etanol/farmacología , Formiatos/farmacología , Hidrógeno/farmacología , Oxidación-Reducción/efectos de los fármacos , ReciclajeRESUMEN
The rapid growth of electronic devices, their subsequent obsolescence and disposal has resulted in electronic waste (e-waste) being one of the fastest increasing waste streams worldwide. The main component of e-waste is printed circuit boards (PCBs), which contain substantial quantities of precious metals in concentrations significantly higher than those typically found in corresponding ores. The high value and limited reserves of minerals containing these metals makes urban mining of precious metals very attractive. This article is focused on the concentration and recovery of precious metals during pyro-metallurgical recycling of waste PCBs. High temperature pyrolysis was carried out for ten minutes in a horizontal tube furnace in the temperature range 800-1350°C under Argon gas flowing at 1L/min. These temperatures were chosen to lie below and above the melting point (1084.87°C) of copper, the main metal in PCBs, to study the influence of its physical state on the recovery of precious metals. The heat treatment of waste PCBs resulted in two different types of solid products, namely a carbonaceous non-metallic fraction (NMFs) and metallic products, composed of copper rich foils and/or droplets and tin-lead rich droplets and some wires. Significant proportions of Ag, Au, Pd and Pt were found concentrated within two types of metallic phases, with very limited quantities retained by the NMFs. This process was successful in concentrating several precious metals such as Ag, Au, Pd and Pt in a small volume fraction, and reduced volumes for further processing/refinement by up to 75%. The amounts of secondary wastes produced were also minimised to a great extent. The generation of precious metals rich metallic phases demonstrates high temperature pyrolysis as a viable approach towards the recovery of precious metals from e-waste.
Asunto(s)
Residuos Electrónicos , Metalurgia/métodos , Metales/aislamiento & purificación , Reciclaje/métodos , Cerámica , Cobre/química , Oro/aislamiento & purificación , Paladio/aislamiento & purificación , Platino (Metal)/aislamiento & purificación , Plata/aislamiento & purificaciónRESUMEN
Developing low-cost, efficient processes for recovering and recycling palladium, gold and cobalt metals from urban mine remains a significant challenge in industrialized countries. Here, the development of optical mesosensors/adsorbents (MSAs) for efficient recognition and selective recovery of Pd(II), Au(III), and Co(II) from urban mine was achieved. A simple, general method for preparing MSAs based on using high-order mesoporous monolithic scaffolds was described. Hierarchical cubic Ia3d wagon-wheel-shaped MSAs were fabricated by anchoring chelating agents (colorants) into three-dimensional pores and micrometric particle surfaces of the mesoporous monolithic scaffolds. Findings show, for the first time, evidence of controlled optical recognition of Pd(II), Au(III), and Co(II) ions and a highly selective system for recovery of Pd(II) ions (up to ~95%) in ores and industrial wastes. Furthermore, the controlled assessment processes described herein involve evaluation of intrinsic properties (e.g., visual signal change, long-term stability, adsorption efficiency, extraordinary sensitivity, selectivity, and reusability); thus, expensive, sophisticated instruments are not required. Results show evidence that MSAs will attract worldwide attention as a promising technological means of recovering and recycling palladium, gold and cobalt metals.
Asunto(s)
Cobalto/química , Oro/química , Minería/métodos , Nanotecnología/métodos , Paladio/química , Adsorción , Cobalto/aislamiento & purificación , Oro/aislamiento & purificación , Paladio/aislamiento & purificaciónRESUMEN
Palladium nanoparticles (PdNPs) are of great importance as catalytic materials. Their synthesis has been widely studied and interest in their properties is growing. Bio-based methods might be a greener option for designing the PdNPs with reduced environmental impacts. This study reports the synthesis of PdNPs by utilising the aqueous extract of medicinally important Eucommia ulmoides (E. Ulmoides) bark which functions as both reducing and capping agent in moderate reaction conditions. Reduction potential of E. Ulmoides bark aqueous extract was about -0.08 V vs. saturated calomel electrode by open-circuit voltage method and the rich polyphenolics was confirmed by cyclic voltammetry, which helps to reduce palladium ions to PdNPs. The characterisation through high-resolution transmission electron microscopic, energy dispersive X-ray spectroscopy and X-ray diffraction infer that the as-synthesised PdNPs were spherical in shape with a face cubic crystal structure. The results from dynamic light scattering suggest the PdNPs have the narrow size distribution with an average size of 12.6 nm. The lower zeta potential (-25.3 mV) and the Fourier transform infrared spectra indicate that the as-synthesised PdNPs keep remarkably stable for a long period due to the capped biomolecules on the nanoparticle surface. This method for synthesis of PdNPs is simple, economic, non-toxic and efficient. The PdNPs show excellent catalytic activity for the electro-catalytic oxidation of hydrazine and the catalytic reducing degradation of p-aminoazobenzene, a model compound of azo-dyes.
Asunto(s)
Productos Biológicos/síntesis química , Eucommiaceae/química , Nanopartículas del Metal/química , Paladio/aislamiento & purificación , Corteza de la Planta/química , Extractos Vegetales/química , Catálisis , Tecnología Química Verde/métodos , Ensayo de Materiales , Nanopartículas del Metal/ultraestructura , Paladio/química , Tamaño de la Partícula , Agua/químicaRESUMEN
Palladium nanoparticles (Pd NPs) were synthesised by using gum kondagogu (GK), a non-toxic ecofriendly biopolymer. GK acted as both reducing and stabilising agent for the synthesis of Pd NPs. Various reaction parameters, such as concentration of gum, Pd chloride and reaction pH were standardised for the stable synthesis of GK reduced stabilised Pd NPs (GK-Pd NPs). The nanoparticles have been characterised using ultraviolet-visible spectroscopy, transmission electron microscopy and X-ray diffraction. Physical characterisation revealed that the gum synthesised Pd NPs were in the size range of 6.5 ± 2.3 nm and crystallised in face centred cubic (FCC) symmetry. Fourier transform infrared spectroscopy implicated the role of carboxyl, amine and hydroxyl groups in the synthesis. The synthesised Pd NPs were found to be highly stable in nature. The synthesised nanoparticles were found to function as an effective green catalyst (k = 0.182 min⻹) in the reduction of 4-nitrophenol by sodium borohydride, which was evident from the colour change of bright yellow (nitrophenolate; λ(max) - 400 nm) to colourless (4-AP; λ(max) - 294 nm) solution. The overall objectives of the current communication were: (i) to synthesize the Pd NPs using a green reducing/capping agent; GK and (ii) to determine the catalytic performance of the synthesised Pd NPs.
Asunto(s)
Bixaceae/química , Nanopartículas del Metal/química , Nitrofenoles/química , Paladio/aislamiento & purificación , Corteza de la Planta/química , Extractos Vegetales/química , Productos Biológicos/síntesis química , Biopolímeros/química , Catálisis , Tecnología Química Verde/métodos , Ensayo de Materiales , Nanopartículas del Metal/ultraestructura , Nitrofenoles/aislamiento & purificación , Paladio/química , Tamaño de la Partícula , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificaciónRESUMEN
A novel, selective and acid-resisting chitosan fiber adsorbent was prepared by the ion-imprinting technique using Pd(II) and epichlorohydrin as the template and two-step crosslinking agent, respectively. The resulting ion-imprinted chitosan fibers (IIF) were used to selectively adsorb Pd(II) under extremely acidic synthetic metal solutions. The adsorption and selectivity performances of IIF including kinetics, isotherms, pH effects, and regeneration were investigated. Pd(II) rapidly adsorbed on the IIF within 100 min, achieving the adsorption equilibrium. The isotherm results showed that the maximum Pd(II) uptake on the IIF was maintained as 324.6-326.4 mg g(-1) in solutions containing single and multiple metals, whereas the Pd(II) uptake on non-imprinted fibers (NIF) decreased from 313.7 to 235.3 mg g(-1) in solution containing multiple metals. Higher selectivity coefficients values were obtained from the adsorption on the IIF, indicating a better Pd(II) selectivity. The amine group, supposedly the predominant adsorption site for Pd(II), was confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The pH value played a significant role on the mechanism of the selective adsorption in the extremely acidic conditions. Furthermore, the stabilized performance for three cycles of sorption/desorption shows a potential for further large-scale applications.
Asunto(s)
Ácidos/química , Quitosano/química , Paladio/aislamiento & purificación , Adsorción , Iones , Microscopía Electrónica de Rastreo , Soluciones/química , Propiedades de SuperficieRESUMEN
A low-cost and environmentally green biosorbent (PTCS) was prepared by grafting chitosan onto persimmon tannin extract and its potentiality for efficient adsorption of palladium ion (Pd(II)) from aqueous solution was evaluated. Various adsorption parameters such as pH, the initial Pd(II) concentration and temperature were investigated. The maximum adsorption capacity reached 330mg/g at 323K and pH 5.0 when the initial Pd(II) concentration was 100mg/L. The equilibrium adsorption data were satisfactorily fitted with Freundlich isotherm model and biosorption kinetics was found to be in good agreement with pseudo-second-order kinetics model. Thermodynamic calculations indicated that the adsorption process was endothermic and spontaneous in nature because of the negative value of free energy change (ΔG) and positive value of enthalpy change (ΔH). The positive value of entropy change (ΔS) revealed the increased randomness at the solid-liquid interface. FT-IR and XRD analysis verified that Pd(II) adsorption on PTCS was electrostatic interaction and redox reaction. Moreover, selective adsorption study revealed that the adsorbent exhibited good adsorption ability to Pd(II) in the mixture metal ions solutions. All these results indicated that the PTCS biosorbent could be used as a low-cost alternative for the adsorption of Pd(II) in waste-water treatment.
Asunto(s)
Quitosano/química , Diospyros/química , Tecnología Química Verde/métodos , Paladio/química , Taninos/química , Contaminantes Químicos del Agua/química , Agua/química , Adsorción , Tecnología Química Verde/economía , Concentración de Iones de Hidrógeno , Cinética , Paladio/aislamiento & purificación , Soluciones , Temperatura , Contaminantes Químicos del Agua/aislamiento & purificaciónRESUMEN
A simple and practical extraction method of supramolecular solvents (SUPRAS) was developed for separation and enrichment of trace amounts of palladium (Pd) and silver (Ag) in water samples prior to flame atomic absorption spectrometry (FAAS) analysis. The SUPRAS selected was made up of an aqueous solution containing tetrahydrofuran and nonanoic acid. Pd and Ag reacted with diethyldithiocarbamate to form hydrophobic chelates, which were extracted into the vesicles of SUPRAS. Different parameters such as the concentration of chelating agent, sample pH, supramolecular solvent and the effect of foreign ions were studied. Under the optimal conditions, the linear ranges of Pd and Ag were from 10 to 1,000 µg/L. The relative recoveries of Pd and Ag in tap and river water samples at the spiking level of 10 ug/mL ranged from 90.8 to 116%. The relative standard deviations were 3.6-4.0% (n = 9), the limits of detection were 2.8 and 1.9 µg/L and the enrichment factors were 36 and 18 for Pd and Ag, respectively. The quantification limits were 3.2 and 2.4 µg/L. The method was successfully applied to the determination of Pd and Ag in water samples.
Asunto(s)
Paladio/aislamiento & purificación , Plata/aislamiento & purificación , Centrifugación , Ditiocarba/química , Furanos/química , Concentración de Iones de Hidrógeno , Espectrofotometría AtómicaRESUMEN
Biogenic catalysts have been studied over the last 10 years in freshwater and soil environments, but neither their formation nor their application has been explored in marine ecosystems. The objective of this study was to develop a biogenic nanopalladium-based remediation method for reducing chlorinated hydrocarbons from marine environments by employing indigenous marine bacteria. Thirty facultative aerobic marine strains were isolated from two contaminated sites, the Lagoon of Mar Chica, Morocco, and Priolo Gargallo Syracuse, Italy. Eight strains showed concurrent palladium precipitation and biohydrogen production. X-ray diffraction and thin section transmission electron microscopy analysis indicated the presence of metallic Pd nanoparticles of various sizes (5-20 nm) formed either in the cytoplasm, in the periplasmic space, or extracellularly. These biogenic catalysts were used to dechlorinate trichloroethylene in simulated marine environments. Complete dehalogenation of 20 mg L(-1) trichloroethylene was achieved within 1 h using 50 mg L(-1) biogenic nanopalladium. These biogenic nanoparticles are promising developments for future marine bioremediation applications.
Asunto(s)
Desulfovibrio desulfuricans/metabolismo , Hidrocarburos Clorados/aislamiento & purificación , Nanopartículas del Metal/química , Paladio/química , Shewanella/metabolismo , Contaminantes Químicos del Agua/aislamiento & purificación , Biodegradación Ambiental , Catálisis , Halogenación , Italia , Microscopía Electrónica de Transmisión , Paladio/aislamiento & purificación , Tamaño de la Partícula , Tricloroetileno/aislamiento & purificación , Microbiología del Agua , Difracción de Rayos XRESUMEN
A novel hydrometallurgical process was proposed for selective recovery of Cu, Ag, Au and Pd from waste printed circuit boards (PCBs). More than 99% of copper content was dissolved by using two consecutive sulfuric acid leaching steps in the presence of H2O2 as oxidizing agents. The solid residue of 2nd leaching step was treated by acidic thiourea in the presence of ferric iron as oxidizing agent and 85.76% Au and 71.36% Ag dissolution was achieved. The precipitation of Au and Ag from acidic thiourea leachate was investigated by using different amounts of sodium borohydride (SBH) as a reducing agent. The leaching of Pd and remained gold from the solid reside of 3rd leaching step was performed in NaClO-HCl-H2O2 leaching system and the effect of different parameters was investigated. The leaching of Pd and specially Au increased by increasing the NaClO concentration up to 10V% and any further increasing the NaClO concentration has a negligible effect. The leaching of Pd and Au increased by increasing the HCl concentration from 2.5 to 5M. The leaching of Pd and Au were endothermic and raising the temperature had a positive effect on leaching efficiency. The kinetics of Pd leaching was quite fast and after 30min complete leaching of Pd was achieved, while the leaching of Au need a longer contact time. The best conditions for leaching of Pd and Au in NaClO-HCl-H2O2 leaching system were determined to be 5M HCl, 1V% H2O2, 10V% NaClO at 336K for 3h with a solid/liquid ratio of 1/10. 100% of Pd and Au of what was in the chloride leachate were precipitated by using 2g/L SBH. Finally, a process flow sheet for the recovery of Cu, Ag, Au and Pd from PCB was proposed.