Enamel chipping and its ecological correlates in African papionins: Implications for hominin feeding behavior.

African papionins are classic paleoecological referents for fossil hominins. Enamel chips on the teeth of baboons and hominins are argued to represent responses to similar dietary habits; however, a comprehensive analysis of modern papionin chipping is lacking, leaving open the question of analog suitability. Here, we investigate patterns of antemortem enamel chipping across a diverse set of African papionin species occupying a range of ecological niches. We compare papionin chipping frequencies to estimates for Plio-Pleistocene hominins to address hypotheses of habitat and/or dietary similarities. Antemortem chips in seven African papionin species were scored on intact postcanine teeth (P3-M3) using established protocols. Chip size was scored on a tripartite scale. Papio hamadryas and Papio ursinus-two common paleoecological referents-display higher levels of chipping than Plio-Pleistocene hominin taxa (Australopithecus and Paranthropus) posited to have similar dietary habits. Papio populations occupying dry or highly seasonal habitats accumulate more large chips than Papio taxa occupying more mesic habitats, and terrestrial papionins chip their teeth more often than closely related taxa occupying arboreal niches. Chipping is present on the teeth of all Plio-Pleistocene hominins; however, chipping in baboons (P. ursinus and P. hamadryas) consistently exceeds most hominin taxa. Chipping frequencies on their own do not reliably sort taxa into major dietary groupings. We conclude that the large differences in chipping frequency may instead reflect habitat use and food processing idiosyncrasies. Less chipping in Plio-Pleistocene hominin teeth compared to modern Papio is more likely attributable to differences in dental morphology rather than diet.

Relationships between the hard and soft dimensions of the nose in Pan troglodytes and Homo sapiens reveal the positions of the nasal tips of Plio-Pleistocene hominids.

By identifying homogeneity in bone and soft tissue covariation patterns in living hominids, it is possible to produce facial approximation methods with interspecies compatibility. These methods may be useful for producing facial approximations of fossil hominids that are more realistic than currently possible. In this study, we conducted an interspecific comparison of the nasomaxillary region in chimpanzees and modern humans with the aim of producing a method for predicting the positions of the nasal tips of Plio-Pleistocene hominids. We addressed this aim by first collecting and performing regression analyses of linear and angular measurements of nasal cavity length and inclination in modern humans (Homo sapiens; n = 72) and chimpanzees (Pan troglodytes; n = 19), and then performing a set of out-of-group tests. The first test was performed on four subjects that belonged to the same genus as the training sample, i.e., Homo (n = 2) and Pan (n = 2), and the second test, which functioned as an interspecies compatibility test, was performed on Pan paniscus (n = 1), Gorilla gorilla (n = 3), Pongo pygmaeus (n = 1), Pongo abelli (n = 1), Symphalangus syndactylus (n = 3), and Papio hamadryas (n = 3). We identified statistically significant correlations in both humans and chimpanzees with slopes that displayed homogeneity of covariation. Prediction formulae combining these data were found to be compatible with humans and chimpanzees as well as all other African great apes, i.e., bonobos and gorillas. The main conclusion that can be drawn from this study is that our set of regression models for approximating the position of the nasal tip are homogenous among humans and African apes, and can thus be reasonably extended to ancestors leading to these clades.

Correlation between musculoskeletal structure of the hand and primate locomotion: Morphometric and mechanical analysis in prehension using the cross- and triple-ratios.

Biometric ratios of the relative length of the rays in the hand have been analyzed between primate species in the light of their hand function or phylogeny. However, how relative lengths among phalanges are mechanically linked to the grasping function of primates with different locomotor behaviors remains unclear. To clarify this, we calculated cross and triple-ratios, which are related to the torque distribution, and the torque generation mode at different joint angles using the lengths of the phalanges and metacarpal bones in 52 primates belonging to 25 species. The torque exerted on the finger joint and traction force of the flexor tendons necessary for a cylindrical grip and a suspensory hand posture were calculated using the moment arm of flexor tendons measured on magnetic resonance images, and were compared among Hylobates spp., Ateles sp., and Papio hamadryas. Finally, the torques calculated from the model were validated by a mechanical study detecting the force exerted on the phalanx by pulling the digital flexor muscles during suspension in these three species. Canonical discriminant analysis of cross and triple-ratios classified primates almost in accordance with their current classification based on locomotor behavior. The traction force was markedly reduced with flexion of the MCP joint parallel to the torque in brachiating primates; this was notably lower in the terrestrial quadrupedal primates than in the arboreal primates at mild flexion. Our mechanical study supported these features in the torque and traction force generation efficiencies. Our results suggest that suspensory or terrestrial quadrupedal primates have hand structures that can exert more torque at a suspensory posture, or palmigrade and digitigrade locomotion, respectively. Furthermore, our study suggests availability of the cross and triple-ratios as one of the indicators to estimate the hand function from the skeletal structure.

Evolution of the modern baboon (Papio hamadryas): A reassessment of the African Plio-Pleistocene record.

Baboons (Papio hamadryas) are among the most successful extant primates, with a minimum of six distinctive forms throughout Sub-Saharan Africa. However, their presence in the fossil record is unclear. Three early fossil taxa are generally recognized, all from South Africa: Papio izodi, Papio robinsoni and Papio angusticeps. Because of their derived appearance, P. angusticeps and P. robinsoni have sometimes been considered subspecies of P. hamadryas and have been used as biochronological markers for the Plio-Pleistocene hominin sites where they are found. We reexamined fossil Papio forms from across Africa with an emphasis on their distinguishing features and distribution. We find that P. robinsoni and P. angusticeps are distinct from each other in several cranial features, but overlap extensively in dental size. Contrary to previous assessments, no diagnostic cranio-mandibular material suggests these two forms co-occur, and dental variation at each site is comparable to that within P. h. ursinus, suggesting that only one form is present in each case. P izodi, however, may co-occur with P. robinsoni, or another Papio form, at Sterkfontein Member 4. P izodi appears more primitive than P. robinsoni and P. angusticeps. P. robinsoni is slightly distinct from P. hamadryas subspecies in its combination of features while P. angusticeps might be included within one of the modern P. hamadryas varieties (i.e., P. h. angusticeps). No definitive Papio fossils are currently documented in eastern Africa until the Middle Pleistocene, pointing to southern Africa as the geographic place of origin for the genus. These results have implications for Plio-Pleistocene biochronology and baboon evolution.

Cranial sexual dimorphism in the Kinda baboon (Papio hamadryas kindae).

OBJECTIVES: The smallest extant member of genus Papio, the Kinda baboon exhibits low sexual dimorphism and a distinctive cranial shape. Ontogenetic scaling accounts for most cranial-shape differences within Papio, but studies have shown that the Kinda follows a separate ontogenetic trajectory. If so, its cranial-dimorphism pattern should differ from other subspecies. To evaluate this hypothesis, morphometric analysis was used to investigate cranial dimorphism in Papio. MATERIALS AND METHODS: Three-dimensional landmarks were digitized on 434 adult crania representing six Papio subspecies. Size- and shape-dimorphism magnitudes were quantified using centroid size and Procrustes distances. Patterns of sex- and size-related variation were explored using MAN(C)OVA, multivariate regression, and form-space PCA. Canine dimorphism was investigated using dental metrics. RESULTS: Kinda size and shape dimorphism are significantly lower than in other Papio subspecies. The relative magnitude of Kinda shape dimorphism is similar to other southern baboons; Kinda canine dimorphism is unremarkable. MAN(C)OVA results support subspecies differences in cranial dimorphism and scaling. Allometric and dimorphism vectors differ significantly in some subspecies, and their vector-angle matrices are strongly correlated. The Kinda's allometric vector angles are divergent. Form-space PC3, summarizing size-independent dimorphism, separates the Kinda from other subspecies. DISCUSSION: The Kinda baboon exhibits significantly lower size and shape dimorphism than other baboons, but its relative dimorphism levels are unexceptional. The Kinda differs from other subspecies in patterns of allometry, size-related shape dimorphism, and residual shape dimorphism. Kinda facial shape is "masculinized" relative to size, especially in females, suggesting female sexual selection contributed to the evolution of Kinda dimorphism.

The integration of quantitative genetics, paleontology, and neontology reveals genetic underpinnings of primate dental evolution.

Developmental genetics research on mice provides a relatively sound understanding of the genes necessary and sufficient to make mammalian teeth. However, mouse dentitions are highly derived compared with human dentitions, complicating the application of these insights to human biology. We used quantitative genetic analyses of data from living nonhuman primates and extensive osteological and paleontological collections to refine our assessment of dental phenotypes so that they better represent how the underlying genetic mechanisms actually influence anatomical variation. We identify ratios that better characterize the output of two dental genetic patterning mechanisms for primate dentitions. These two newly defined phenotypes are heritable with no measurable pleiotropic effects. When we consider how these two phenotypes vary across neontological and paleontological datasets, we find that the major Middle Miocene taxonomic shift in primate diversity is characterized by a shift in these two genetic outputs. Our results build on the mouse model by combining quantitative genetics and paleontology, and thereby elucidate how genetic mechanisms likely underlie major events in primate evolution.

Papio Cranium from the Hominin-Bearing Site of Malapa: Implications for the Evolution of Modern Baboon Cranial Morphology and South African Plio-Pleistocene Biochronology.

A new partial cranium (UW 88-886) of the Plio-Pleistocene baboon Papio angusticeps from Malapa is identified, described and discussed. UW 88-886 represents the only non-hominin primate yet recovered from Malapa and is important both in the context of baboon evolution as well as South African hominin site biochronology. The new specimen may represent the first appearance of modern baboon anatomy and coincides almost perfectly with molecular divergence date estimates for the origin of the modern P. hamadryas radiation. The fact that the Malapa specimen is dated between ~2.026-2.36 million years ago (Ma) also has implications for the biochronology of other South African Plio-Pleistocene sites where P. angusticeps is found.

Interspecies difference in placement of developing teeth and its relationship with cross-sectional geometry of the mandibular symphysis in four primate species including modern humans.

The form of the anthropoid mandibular symphysis has recently been addressed in association with spatial requirements for the forming anterior teeth. To evaluate potential relationships between the symphyseal shape and teeth further, the growth patterns of the symphyseal region and the positioning of the tooth crypts were examined using CT data, comparing four primate species (modern humans, chimpanzees, Japanese monkeys, and hamadryas baboons) with varied symphyseal curvature and tooth size. First, results showed that interspecies differences in overall mandibular shape including symphyseal inclination and bicanine width are consistently expressed throughout postnatal ontogeny, although local symphyseal configurations related to the superior transverse torus (STT) tended to change considerably during growth in chimpanzees. Second, the four species were found to exhibit differentiated formation positions of the incisor and canine crypts. In particular, I2 developed between I1 and C in humans with a broad bicanine space and small teeth, whereas it was positioned posterior to I1 and above C in the cercopithecines with an extremely narrow bicanine space. In chimpanzees, despite the large bicanine width, I1 and I2 grew with a large antero-posterior overlap owing to their large size. These results indicate that the dental positioning is determined in concert with the size balance of the available mandibular space and forming teeth. Finally, the positions/contours of I2 crypt were shown to correspond strongly with the STT across the taxa. This suggests that interspecies differences in symphyseal shape should be interpreted partially by the species-specific positional relationships of the developing anterior teeth.

Relationship between canine dimorphism and mandibular morphology in the hamadryas baboon and the Japanese monkey.

To examine morphological interrelationships between canine size and mandibular corpus shape, inter-sex comparisons were made in the hamadryas baboon and the Japanese monkey, known to display extreme and moderate canine dimorphism, respectively. Results of adult comparisons showed that all mandibular dimensions were significantly larger in the males than in the females in both species. In the hamadryas baboon, the males also exhibited a higher ratio of anterior to posterior corpus height than the females. This sex difference in corpus shape was not significant in the Japanese monkey, indicating lack of involvement of canine dimorphism. Analysis of mandibular growth patterns in the hamadryas baboon demonstrated that significant sexual size difference did not occur before incisor eruption, and that the anteriorly high corpus of the adult male mandible was associated with a rapidly increasing symphyseal height after incisor eruption. It was also shown that the female canine started to erupt shortly after incisor eruption, while the forming male canine continued to stay near the mandibular base and developed further in size until eruption. The relative positions of the incisors kept shifting upwards even after eruption in the males, while they hardly changed in the females. It is therefore suggested that the prolonged development and size increase of the male canine is accompanied by further enlargement of the symphysis, resulting in the higher anterior corpus of the adult males compared to the adult females. The results thus indicate the importance of understanding the spatial relationships of the developing teeth in interpreting mandibular morphology.

Structural adaptation of trabecular bone revealed by position resolved analysis of proximal femora of different primates.

The anisotropic arrangement of trabeculae in the proximal femur of humans and primates is seen as striking evidence for the functional adaptation of trabecular bone architecture. Quantitative evidence to demonstrate this adaptation for trabecular bone is still scarce, because experimental design of controlled load change is difficult. In this work, we use the natural variation of loading caused by a different main locomotor behavior of primates. Using high-resolution computed tomography and advanced image analysis techniques, we analyze the heterogeneity of the architecture in four proximal femora of four primate species. Although the small sample number does not allow an interspecies comparison, the very differently loaded bones are well suited to search for common structural features as a result of adaptation. A cubic volume of interest of size (5 mm)(3) was moved through the proximal femur and a morphometric analysis including local anisotropy was performed on 209 positions on average. The correlation of bone volume fraction (BV/TV) with trabecular number (Tb.N) and trabecular thickness (Tb.Th) leads to the suggestion of two different mechanisms of trabecular bone adaptation. Higher values of BV/TV in highly loaded regions of the proximal femur are due to a thickening of the trabeculae, whereas Tb.N does not change. In less loaded regions, however, lower values of BV/TV are found, caused by a reduction of the number of the trabeculae, whereas Tb.Th remains constant. This reduction in Tb.N goes along with an increase in the degree of anisotropy, indicating an adaptive selection of trabeculae.

A preliminary study of the baboon prostate pathophysiology.

BACKGROUND: Prostate cancer, benign prostatic hyperplasia, and prostatitis frequently affect men worldwide. At present there are no suitable animal models for these diseases. This study explores the potential use of the baboon as a model for prostatic diseases. METHODS: Prostates of 48 baboons of different ages were studied. Prostate specific antigen (PSA) and alpha-methyl-acyl-CoA racemase (AMACR) were localized in the different lobes of the prostate by Western blotting and immunohistochemistry. PSA in baboon serum was demonstrated by radioimmunoassay and western blotting. Baboon AMACR cDNA was cloned and its expression assayed in baboon tissues. RESULTS: The baboon prostate is anatomically and histologically similar to its human counterpart, with cranial and caudal lobes corresponding to central and peripheral zones of the human prostate. We found lymphocytic infiltration (91%), and sclerosing/atrophic lesions (34%). PSA tissue immunostaining intensity and alpha-methyl-acyl-CoA racemase (AMACR) gene expression levels differed between the cranial and caudal lobes of the prostate. The cloned baboon AMACR cDNA showed 96% homology with its human counterpart. Anti-human AMACR, PSA and basal keratin antibodies stained intracellular and basement membrane structures in the baboon prostate. The sclerosing/atrophic lesions were comparable to their human counterparts. CONCLUSIONS: The similarity of baboon prostate to its human counterpart and the fact that human antibodies (AMACR, PSA, basal keratin) are reactive to baboon prostatic proteins indicates that the baboon is a promising model for human prostatic diseases.

A multivariate comparison of dental variation in wild and captive populations of baboons (Papio hamadryas).

Phenotypic variation is critical to many aspects of biological research. Use of a captive population to address questions concerning the genetics and evolution of dental variation raises the question of how the pattern of phenotypic variation under study compares with that in a wild population of the same species. Differences in the pattern of variation within wild and captive populations may indicate different genetic and non-genetic factors, and also may have implications for how well the captive group can serve as a model for its wild type relatives. We compared dental size measures from two Papio hamadryas populations, one captive and one wild. Lengths and widths of maxillary and mandibular second molars (M2s) were collected from 630 baboons from a captive pedigreed breeding colony housed at the Southwest National Primate Research Center in San Antonio, Texas, and 125 baboons from a wild population culled from a sisal plantation in Kibweze, Kenya. Although the two populations consistently differed with respect to lengths and widths of the M2s, principal components analyses show that the basic pattern to variation in these molar crown traits is remarkably similar in both populations; and linear functions based on these measures cannot reliably discriminate between the two groups. This similarity in the pattern of variation among these dental crown measures in these two groups suggests that analyses to dissect their genetic architecture in captive populations is likely to be highly relevant to dental variation in wild baboons as well.

A comparison of cortical elastic properties in the craniofacial skeletons of three primate species and its relevance to the study of human evolution.

When a force is applied to an object, the resulting pattern of strain is a function of both the object's geometry and its elastic properties. Thus, knowledge of elastic properties in craniofacial cortical bone is indispensable for exploring the biomechanics and adaptation of primate skulls. However, elastic properties, such as density and stiffness, cannot be measured in all species, particularly extinct species known only from fossils. In order for advanced engineering techniques such as finite element analysis (FEA) to be applied to questions of primate and hominid craniofacial functional morphology, it is important to understand interspecific patterns of variation in elastic properties. We hypothesized that closely related species would have similar patterns of bone elastic properties, and that similarities with extant species should allow reasonable predictions of elastic properties in the skeletons of extinct primate species. In this study, we tested this hypothesis by measuring elastic properties in five areas of the external cortex of the baboon craniofacial skeleton using an ultrasonic technique, and by comparing the results to existing data from macaque and human crania. Results showed that cortical density, thickness, elastic and shear moduli, and anisotropy varied among areas in the baboon cranium. Similar variation had previously been found in rhesus and human crania, suggesting area-specific elastic patterns in the skulls of each species. Comparison among species showed differences, suggesting species-specific patterns. These patterns were more similar between macaques and baboons for density, maximum elastic and shear stiffness, and anisotropy than between either of these and humans. This finding demonstrates that patterns of cortical elastic properties are generally similar in closely related primate species with similar craniofacial morphology. Thus, reasonable estimates of cortical bone elastic properties should be possible for extinct species through the study of phylogenetically related and functionally similar modern forms. For example, reasonable elastic property estimates of cortical bone from fossil hominid skulls should be possible once adequate information about such properties in extant great apes is added to our current data from humans, macaques, and baboons. Such data should eventually allow FEA of craniofacial function in fossil hominids.

Low Y chromosome variation in Saudi-Arabian hamadryas baboons (Papio hamadryas hamadryas).

It is important to characterise the amount of variation on the mammalian Y chromosome in order to assess its potential for use in evolutionary studies. We report very low levels of polymorphism on the Y chromosome of Saudi-Arabian hamadryas baboons, Papio hamadryas hamadryas. We found no segregating sites on the Y, despite sequence analysis of 3 kb noncontiguous intron sequence in 16 males with divergent autosomal microsatellite genotypes, and a further analysis of 1.1 kb intron sequence in 97 males from four populations by SSCP. In addition, we tested seven human-derived Y-linked microsatellites in baboons. Only four of these loci were male-specific and only one was polymorphic in our 97 male sample set. Polymorphism on the Y chromosome of Arabian hamadryas appears to be low compared to other primate species for which data are available (eg humans, chimpanzees and bonobos). Low effective population size (Ne) of paternal genes due to polygyny and female-biased adult sex ratio is a potential reason for low Y chromosome variation in this species. However, low Ne for the Y should be counterbalanced to some extent by the species' atypical pattern of male philopatry and female-biased dispersal. Allelic richness averaged over seven loci was not significantly different between an African and an Arabian population, suggesting that loss of variation during the colonisation of Arabia does not explain low Y variation. Finally, in the absence of nucleotide polymorphism, it is unclear to what extent selection could be responsible for low Y variation in this species.

Cranial ontogeny of Papio baboons (Papio hamadryas).

Cranial form in subspecies of Papio baboons (Papio hamadryas) varies in relation to size, geography, and sex. However, knowledge about this variation is based mainly on adults, precluding direct assessments of the evolutionary factors that are ultimately responsible for adult shape variation. Consequently, this study tests hypotheses about the development of size and shape differences among subspecies of Papio baboons, anticipating limited evolutionary divergences in the ontogenetic pathways leading to adult endpoints. Geometric morphometric and bivariate allometric analyses are used to explore developmental size and shape variation. Allometric scaling in adult Papio baboons occurs because both sexes and all subspecies follow similar developmental pathways to a variety of adult forms. However, complex allometry contributes to form differences, producing potentially important shape differences that emerge during development. Modest shape differences that are statistically independent of size distinguish chacma baboons (P. h. ursinus) from other forms. A small-headed subspecies, the Kinda baboon (P. h. kindae), also presents a distinctive ontogeny, and may provide insights into the evolution of size change in this species. Variation among subspecies that is statistically independent of size involves the rostrum, zygomatic breadths, and cranial flexion. These features may be related to diet, but the precise biomechanical correlates of baboon form variation remain unclear.

Dental microwear in anubis and hybrid baboons (Papio hamadryas, sensu lato) living in Awash National Park, Ethiopia.

We describe dental microwear in baboons (Papio hamadryas sensu lato) from the anubis-hamadryas hybrid zone of Awash National Park, Ethiopia, outline its variation with sex and age, and attempt to relate the observed microwear pattern to environment and diet. Casts of the maxillary second molar of 52 adult and subadult individuals of both sexes were examined with a scanning electron microscope at x 500. Digitized micrographs were taken at a consistent location on facet 9, and microwear was recorded with an image analysis software package. Univariate and multivariate statistics were used to investigate the shape, size, and density of microwear features. The overall pattern of microwear exhibits an unusual combination of high feature density, with numerous small pits and relatively wide striations, and a high correlation between width of pits and striations across individuals. We interpret this pattern as predominantly the consequence of abrasion by relatively small-caliber environmental grit when accidentally ingested with tough foods such as dried seeds and fruits, as expected in a terrestrial omnivore living in a dusty habitat. Statistical analysis revealed no significant differences between groups defined by sex, age, or troop membership, a result consistent with qualitative observations of feeding habits in this population, and which lends no support to the hypothesis that the longer jaws of adult males should result in longer striations. A trend towards greater feature density in females, however, might be due to limited sexual dinichism, and merits further investigation.