RESUMEN
PURPOSE: To evaluate how fluoride- or chitosan-based toothpaste used during at-home bleaching affects enamel roughness, tooth color, and staining susceptibility. METHODS: Bovine enamel blocks were submitted to a 14-day cycling regime considering a factorial design (bleaching agent x toothpaste, 2 x 3), with n=10: (1) bleaching with 16% carbamide peroxide (CP) or 6% hydrogen peroxide (HP), and (2) daily exposure of a fluoride (1,450 ppm F-NaF) toothpaste (FT), chitosan-based toothpaste (CBT), or distilled water (control). Then, 24 hours after the last day of bleaching procedure the samples were exposed to a coffee solution. Color (ΔEab, ΔE00, L*, a*, b*) and roughness (Ra, µm) analyses were performed to compare the samples initially (baseline), after bleaching, and after coffee staining. The results were evaluated by linear models for repeated measures (L*, a*, b*, and Ra), 2-way ANOVA (ΔEab, ΔE00) and Tukey's test (α= 0.05). RESULTS: After the at-home bleaching procedure (toothpaste vs. time, P< 0.0001), the toothpaste groups presented a statistically lower Ra than the control (CBT
Asunto(s)
Peróxido de Carbamida , Quitosano , Esmalte Dental , Peróxido de Hidrógeno , Blanqueadores Dentales , Blanqueamiento de Dientes , Decoloración de Dientes , Pastas de Dientes , Quitosano/farmacología , Pastas de Dientes/farmacología , Animales , Bovinos , Blanqueamiento de Dientes/métodos , Esmalte Dental/efectos de los fármacos , Blanqueadores Dentales/farmacología , Peróxido de Hidrógeno/farmacología , Peróxido de Carbamida/farmacología , Propiedades de Superficie , Fluoruros/farmacología , Color , Urea/análogos & derivados , Urea/farmacología , Café , Peróxidos/farmacologíaRESUMEN
BACKGROUND: Although several studies indicate the harmful effects of bleaching on pulp tissue, the demand for this procedure using high concentrations of hydrogen peroxide (HP) is high. OBJECTIVES: To investigate the influence of bleaching on the pulp tissue. METHODS: Electronic searches were conducted (PubMed/MEDLINE, Scopus, Cochrane Library and grey literature) until February 2021. Only in vivo studies that evaluated the effects of HP and/or carbamide peroxide (CP) bleaching gels on the inflammatory response in the pulp tissue compared with a non-bleached group were included. Risk of bias was performed according to a modified Methodological Index for Non-Randomized Studies scale for human studies and the Systematic Review Centre for Laboratory Animal Experimentation's RoB tool for animal studies. Meta-analysis was unfeasible. RESULTS: Of the 1311 studies, 30 were eligible. Of these, 18 studies evaluated the inflammatory response in animal models. All these studies reported a moderate-to-strong inflammatory response in the superficial regions of pulp, characterized by cell disorganization and necrotic areas, particularly during the initial periods following exposure to 35%-38% HP, for 30-40 min. In the evaluation of human teeth across 11 studies, seven investigated inflammatory responses, with five observing significant inflammation in the pulp of bleached teeth. In terms of tertiary dentine deposition, 11 out of 12 studies noted its occurrence after bleaching with 35%-38% HP in long-term assessments. Additionally, three studies reported significant levels of osteocalcin/osteopontin at 2 or 10 days post-treatment. Other studies indicated an increase in pro-inflammatory cytokines ranging from immediately up to 10 days after bleaching. Studies using humans' teeth had a low risk of bias, whereas animal studies had a high risk of bias. DISCUSSION: Despite the heterogeneity in bleaching protocols among studies, High-concentrations of HP shows the potential to induce significant pulp damage. CONCLUSIONS: High-concentrations of bleaching gel increases inflammatory response and necrosis in the pulp tissue at short periods after bleaching, mainly in rat molars and in human incisors, in addition to greater hard tissue deposition over time. However, further well-described histological studies with long-term follow-up are encouraged due to the methodological limitations of these studies. REGISTRATION: PROSPERO (CRD42021230937).
Asunto(s)
Peróxido de Carbamida , Pulpa Dental , Peróxido de Hidrógeno , Blanqueadores Dentales , Blanqueamiento de Dientes , Blanqueamiento de Dientes/métodos , Blanqueamiento de Dientes/efectos adversos , Pulpa Dental/efectos de los fármacos , Pulpa Dental/patología , Humanos , Animales , Peróxido de Carbamida/farmacologíaRESUMEN
AIM: To evaluate the bleaching efficacy and effects on enamel properties of experimental gels with carbamide peroxide (CP; 10%) or hydrogen peroxide (HP; 6%) containing calcium polyphosphate sub-microparticles (CaPPs). METHODS: A total of 216 bovine tooth specimens were divided for microhardness and color analyses (n = 108) and block randomized into nine groups (n = 12): (G1) commercial CP (Whiteness Perfect, FGM; Brazil); (G2) experimental CP; (G3) CP-0.5%CaPPs; (G4) CP-1.5%CaPPs; (G5) commercial HP (Potenza Bianco, PHS; Brazil); (G6) experimental HP; (G7) HP-0.5%CaPPs; (G8) HP-1.5%CaPPs; (G9) artificial saliva. The gels' pH values were determined with a bench pH meter. Color (ΔE, ΔE00, ΔWID) and microhardness variation were evaluated before and after the therapy. Part of the specimens used for microhardness was submitted to the scanning electron microscopy (SEM) (n = 3) and energy-dispersive X-ray spectroscopy EDX (n = 3) analyses. Statistical analyses were performed in the R statistical software (α = 0.05). Linear mixed models for repeated measures in time were used to analyze microhardness and L* values. Generalized linear models were used to analyze the a*, b*, ΔE, ΔE00, and ΔWID, considering a group effect. The EDX data were analyzed using a one-way ANOVA with Tukey's test. RESULTS: The gels' pH remained over 6,0. All gels effectively bleached the specimens and did not differ significantly. When compared to the control group, the hardness was significantly lower in the G1, G2, G6, and G7 groups. The G3, G4, G5, and G8 groups did not differ significantly (p > 0.05). CONCLUSION: The incorporation of CaPPs in low-concentration whitening gels reduces its negative effects on microhardness without interfering with their bleaching efficacy.
Asunto(s)
Peróxido de Carbamida , Esmalte Dental , Geles , Peróxido de Hidrógeno , Microscopía Electrónica de Rastreo , Polifosfatos , Blanqueadores Dentales , Blanqueamiento de Dientes , Bovinos , Esmalte Dental/efectos de los fármacos , Animales , Peróxido de Hidrógeno/química , Blanqueadores Dentales/farmacología , Blanqueadores Dentales/química , Polifosfatos/farmacología , Polifosfatos/química , Blanqueamiento de Dientes/métodos , Peróxido de Carbamida/farmacología , Dureza , Propiedades de Superficie , Espectrometría por Rayos X , Técnicas In Vitro , Color , Peróxidos/farmacología , Urea/análogos & derivados , Urea/farmacología , Urea/química , Concentración de Iones de Hidrógeno , Tamaño de la PartículaRESUMEN
Fungicide carbendazim accumulation in soils and plants is a wide concern. Nitrogen (N) is a substantial nutrient limiting crop growth and affecting soil microbial activity and the community in degrading fungicides. We investigated the effects of urea-hydrogen peroxide (UHP) and nitrification inhibitors Dicyandiamide (DCD) and 3,4-dimethylpyrazole phosphate (DMPP) on carbendazim accumulation and soil and endophytic microbial communities. The UHP application had negligible influences on soil and plant carbendazim accumulation, but the combined UHP and DCD decreased soil carbendazim accumulation by 5.31% and the combined UHP and DMPP decreased plant carbendazim accumulation by 44.36%. The combined UHP and nitrification inhibitor significantly decreased the ratios of soil Firmicutes and endophytic Ascomycota. Soil microbial community assembly was governed by the stochastic process, while the stochastic and deterministic processes governed the endophyte. Our findings could provide considerable methods to reduce fungicide accumulation in soil-plant systems with agricultural N management strategies.
Asunto(s)
Microbiota , Suelo , Nitrificación , Peróxido de Hidrógeno/farmacología , Peróxido de Carbamida/farmacología , Yoduro de Dimetilfenilpiperazina/farmacología , Microbiología del Suelo , Fertilizantes , Nitrógeno/análisisRESUMEN
BACKGROUND: Negative effects of bleaching on dentin have previously been reported in vitro. OBJECTIVE: The purpose of this study was to determine the effect of carbamide peroxide bleaching on dentin fatigue resistance using a clinically relevant in situ model. METHODS AND MATERIALS: Following research ethics board approval, 60 human teeth requiring extraction were collected. Sterilized human dentin specimens were cut (1.2x1.2x10 mm) and secured into customized bleaching trays to be used by study participants. Participants were randomly assigned to either bleach (10% carbamide peroxide, n=23) or control (gel without bleach, n=26) treatment groups. Treatment was applied to the bleaching trays and worn overnight by participants for 14 days. After treatment completion, dentin specimens were removed from the bleaching trays and subjected to fatigue testing (10 N, 3 mm/s, 2x105 cycles) while submerged in artificial saliva. Kaplan-Meier survival analysis was conducted to compare the number of cycles to failure during fatigue testing in both groups. A log rank test was run to determine if there were differences in the survival distribution between the two groups (α<0.05). RESULTS: The median number of cycles to failure was 352 ± 202 and 760 ± 644 for the bleach and control groups, respectively. The survival distributions for the two groups were significantly different (p=0.020). Dentin fatigue resistance was significantly lower in the bleach group compared to the control. CONCLUSIONS: Direct bleaching of human dentin using an at-home tray bleaching protocol in situ reduced dentin fatigue resistance. This has implications for tooth fracture risk and longevity.
Asunto(s)
Peróxidos , Blanqueamiento de Dientes , Humanos , Peróxido de Carbamida/farmacología , Peróxidos/uso terapéutico , Urea , Dentina , Blanqueamiento de Dientes/efectos adversos , Blanqueamiento de Dientes/métodos , Peróxido de Hidrógeno/farmacologíaRESUMEN
BACKGROUND: The effectiveness of in-office bleaching protocols performed with violet LED light either combined with a bleaching agent containing 37% carbamide peroxide, or not, was determined by comparing teeth with different degrees of darkening. METHODOLOGY: Eighty bovine incisors were separated into groups of "light" teeth (luminosity greater than or equal to B3) and "dark" teeth (less than or equal to A3.5) to receive the protocols: HP - 35% hydrogen peroxide (Whiteness HP), CP - 37% carbamide peroxide (Whiteness SuperEndo), LED - violet LED light (Bright Max Whitening), CPLED - CP associated with the LED. For color analysis the CIEL*a*b* e WID, ΔEab, ΔE00 e ΔWID parameters were used. Data were analyzed using Mann-Whitney, Kruskal-Wallis, Dunn, Friedman or Nemenyi tests (α = 5%). RESULTS: HP and CP resulted in similar color change values (ΔEab, ΔE00 e ΔWID) for light and dark teeth (p > 0.05). Dark teeth showed better bleaching effectiveness (ΔEab, ΔE00 e ΔWID) than light teeth when CPLED was used (p < 0.05). LED showed color change that were below the limits of acceptability and perceptibility for ΔWID. CONCLUSION: light teeth are effectively bleached with the use of HP or CP, whereas dark teeth respond better to treatment with the CPLED protocol. Violet LED used alone did not show a satisfactory result.
Asunto(s)
Fotoquimioterapia , Blanqueadores Dentales , Blanqueamiento de Dientes , Animales , Bovinos , Peróxido de Carbamida/farmacología , Blanqueamiento de Dientes/métodos , Fotoquimioterapia/métodos , Fármacos Fotosensibilizantes , Incisivo , ColorRESUMEN
BACKGROUND: The effectiveness of dental color change was assessed by incorporating titanium dioxide (TiO2) into 37% carbamide peroxide bleaching agent associated with hybrid light. METHODOLOGY: Fifty bovine incisors were selected to receive the bleaching treatment, and separated into five groups (n = 10): 35% hydrogen peroxide (HP) (Whiteness HP, FGM/HP); 37% carbamide peroxide (CP) (Whiteness SuperEndo, FGM/CP); CP + hybrid light (HL) (CP HL); CP + 1% TiO2 (CP TiO2); CP TiO2 + hybrid light (CP TiO2 HL). The bleaching gels were applied to the dental surface for 30 min. Hybrid light (Whitening Plus, DMC/infrared laser diodes + blue LEDs +violet LEDs) was applied with 1 min of active light, alternating with 1 min of pause. A spectrophotometer (VITA Easyshade® Advance, Vita) was used to determine the color of the dental elements at baseline and time points after the 1st, 2nd and 3rd bleaching sessions. Color change effectiveness was evaluated using Vita Classical, CIEL*a*b*, WID and ΔEab, ΔE00 and ΔWID parameters. RESULTS: Generalized mixed linear models for repeated measures (α = 5%) showed significant decrease in Vita Classical scores and a* and b* values, as well as an increase in L* and ∆WID values for all the groups. Higher color change values for ΔEab were observed for CP HL and CP TiO2 HL, while those of ΔE00 and ΔWID were higher for CP TiO2 HL at the end of the bleaching treatment. CONCLUSION: Hybrid light applied with TiO2 incorporated into CP potentiated the effectiveness of the color change in the tooth structure.
Asunto(s)
Blanqueadores , Fotoquimioterapia , Blanqueadores Dentales , Blanqueamiento de Dientes , Animales , Bovinos , Peróxido de Carbamida/farmacología , Blanqueadores Dentales/farmacología , Fotoquimioterapia/métodos , Fármacos Fotosensibilizantes/farmacología , Peróxido de Hidrógeno/farmacología , Ácido Hipocloroso , Incisivo , ColorRESUMEN
Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.
Asunto(s)
Blanqueadores Dentales , Blanqueamiento de Dientes , Animales , Bovinos , Peróxido de Carbamida/farmacología , Esmalte Dental , Geles , Peróxido de Hidrógeno , Peróxidos/farmacología , Propiedades de Superficie , Blanqueamiento de Dientes/métodos , Blanqueadores Dentales/farmacología , Urea/farmacologíaRESUMEN
PURPOSE: To compare the effect of office, home, and internal bleaching on the shear bond strength (SBS) of enamel to porcelain laminate veneers. MATERIALS AND METHODS: A total of 36 extracted maxillary central incisors were randomly assigned to four groups: (1) no bleaching (control); (2) office bleaching with 40% hydrogen peroxide (HP); (3) home bleaching with 15% carbamide peroxide; and (4) intracoronal bleaching with sodium perborate (SP) using the walking bleaching technique. All teeth were separately immersed in artificial saliva for 14 days. The enamel surface was then reduced by 0.5 mm, and IPS e.max Press ceramic discs were bonded using a resin cement. After 24 hours, all specimens were thermocycled (5,000 cycles, 5°C to 55°C). The SBS was measured using a universal testing machine, and the failure mode was determined using a stereomicroscope. One-way ANOVA and Tukey honest significant difference tests were used for data analysis (P < .05). RESULTS: A significant difference was noted among the groups (P < .001). The highest SBS was noted in the control group (15.71 ± 5.39 MPa). The mean SBS in the office bleaching group (12.30 ± 4.64 MPa) was almost the same as the control. The lowest mean SBS belonged to the home bleaching group (5.39 ± 3.99 MPa). The mode of failure was adhesive in all four groups. CONCLUSION: If bleaching is intended to be followed by porcelain veneers, the office bleaching technique with 40% HP is recommended. Delaying the bonding procedure for 2 weeks does not appear to be effective with home or intracoronal bleaching.
Asunto(s)
Recubrimiento Dental Adhesivo , Coronas con Frente Estético , Blanqueamiento de Dientes , Peróxido de Carbamida/farmacología , Recubrimiento Dental Adhesivo/métodos , Esmalte Dental , Porcelana Dental/química , Análisis del Estrés Dental , Peróxido de Hidrógeno/farmacología , Ensayo de Materiales , Cementos de Resina/química , Cementos de Resina/farmacología , Resistencia al Corte , Incisivo , HumanosRESUMEN
OBJECTIVES: To compare the side effects of typical whitening treatments (by means of oxidation) compared to the new treatment developed by the authors through reduction. The aim is to provide information about the chemical interactions of the encapsulated reductant agent (metabisulfite, MBS) with the enamel structure compared with carbamide peroxide (CP) and to study their penetration in the hydroxyapatite (HAP) and the changes produced in the mineral and its hardness. METHODS: Chemical imaging is performed by synchrotron-based micro Fourier transformed infrared spectroscopy (SR-µFTIR). Continuous Stiffness Measurements (CSM) were used to determine the depth reached by the treatments in order to delimitate the area of study. RESULTS: The SR-µFTIR studies showed that MBS treatments softened the first 10 µm of enamel, as happens in the initial stages of tooth decay. Principal component analysis (PCA) showed that the main differences between treatments were found in the intensity of the ν3 PO43- peak related to tooth demineralization. CP and MBS promoted different changes in the HAP mineral, observed as opposite shifts of the peak: CP shortened the P-O bond while MBS seemed to elongate it. Moreover, MBS promoted the loss of carbonates while CP did not, which is probably related to the solution's pH. When comparing MBS and MBS Liposomes, it was observed how liposomes favoured the diffusion of MBS to inner layers, since the effects of MBS were observed in deeper enamel. Thus, the encapsulated MBS whitening effect is highly improved in terms of time when compared to MBS alone or CP. SIGNIFICANCE: The obtained results indicated that using oxidizing (CP) or reducing (MBS) treatments, promote different HAP mineral changes, and that liposomes favour the diffusion of MBS into the enamel. It is the first time that synchrotron light is used to map the bovine incisor's enamel chemically, and to determine the effect of a whitening treatment in terms of chemical HAP modifications, and the extent in deep of these effects.
Asunto(s)
Blanqueadores Dentales , Blanqueamiento de Dientes , Diente , Animales , Peróxido de Carbamida/farmacología , Bovinos , Esmalte Dental , Durapatita/farmacología , Peróxido de Hidrógeno , Liposomas/farmacología , Oxidación-Reducción , Peróxidos , Espectroscopía Infrarroja por Transformada de Fourier , Sincrotrones , Blanqueamiento de Dientes/métodos , Blanqueadores Dentales/farmacología , UreaRESUMEN
This study aimed to assess the viability of dental cells following time-dependent carbamide peroxide teeth-whitening treatments using an in-vitro dentin perfusion assay model. 30 teeth were exposed to 5% or 16% CP gel (4 h daily) for 2-weeks. The enamel organic content was measured with thermogravimetry. The time-dependent viability of human dental pulp stem cells (HDPSCs) and gingival fibroblast cells (HGFCs) following either indirect exposure to 3 commercially available concentrations of CP gel using an in-vitro dentin perfusion assay or direct exposure to 5% H2O2 were investigated by evaluating change in cell morphology and by hemocytometry. The 5% and 16% CP produced a significantly lower (p < 0.001) enamel protein content (by weight) when compared to the control. The organic content in enamel varied accordingly to the CP treatment: for the 16% and 5% CP treatment groups, a variation of 4.0% and 5.4%, respectively, was observed with no significant difference. The cell viability of HDPSCs decreased exponentially over time for all groups. Within the limitation of this in-vitro study, we conclude that even low concentrations of H2O2 and CP result in a deleterious change in enamel protein content and compromise the viability of HGFCs and HDPSCs. These effects should be observed in-vivo.
Asunto(s)
Supervivencia Celular/efectos de los fármacos , Pulpa Dental/citología , Blanqueadores Dentales/farmacología , Diente Premolar/citología , Diente Premolar/efectos de los fármacos , Peróxido de Carbamida/farmacología , Células Cultivadas , Esmalte Dental/citología , Esmalte Dental/efectos de los fármacos , Pulpa Dental/efectos de los fármacos , Dentina/citología , Dentina/efectos de los fármacos , Humanos , Peróxido de Hidrógeno/farmacología , Diente Molar/citología , Diente Molar/efectos de los fármacosRESUMEN
In this in vitro study, the effect of the application of tooth bleaching products in human enamel was evaluated using polarized Raman microscopy, particle induced gamma-ray emission (PIGE) and Vickers Hardness test. Due to their acidic nature, teeth whitening products are associated with changes in enamel mineralization. Consequently, products have appeared in the market that promote the incorporation of fluorine in order to decrease the solubility of the hydroxyapatite in enamel and prevent demineralization. This way, four commercial products with different active principle concentrations: 16% carbamide peroxide (Opalescence PF® and VivaStyle®) or 6% hydrogen peroxide (Opalescence Go PF® and VivaStyle Paint On®) and presence or not of fluorine were compared. The information on the crystalline state of the enamel was provided by the determination of the depolarization ratio of the symmetric stretching band of phosphate (at 959 cm-1). Furthermore, the content and uptake of F was evaluated using PIGE in the two fluorinated products as well as in one negative control group. In order to evaluate the microhardness of enamel by means of Vickers test, another group of polished samples was prepared (using Opalescence PF®) and evaluated. Conversely to what could be expected, the obtained results determined a statistically significant decrease of depolarization ratio, leading to an increase of mineralization after the application of the bleaching products, except for VivaStyle®. For this group, no significant variation was obtained before-after treatment, most likely due to the acidity of the product (pH = 5.8). Additionally, an increase of concentration of F in the dental tissues was determined for the fluorinated products. On the other hand, enamel polishing, required for the application of the Vickers test, led to increased susceptibility to erosion, resulting in decreased hardness and an increased enamel depolarization ratio.
Asunto(s)
Blanqueadores/farmacología , Peróxido de Hidrógeno/farmacología , Blanqueamiento de Dientes/métodos , Peróxido de Carbamida/farmacología , Esmalte Dental/efectos de los fármacos , Combinación de Medicamentos , Evaluación de Medicamentos , Flúor/farmacocinética , Rayos gamma , Halogenación , Humanos , Concentración de Iones de Hidrógeno , Microscopía , Peróxidos/farmacología , Polivinilos/farmacología , Espectrometría Raman/instrumentación , Espectrometría Raman/métodos , Urea/análogos & derivados , Urea/farmacologíaRESUMEN
INTRODUCTION: This study aimed to evaluate the effect of bleaching with carbamide peroxide (CP) according to different doses and intervals between bleaching and bonding on shear bond strength (SBS) of orthodontic brackets. METHODS: Cochrane Central Register of Controlled Trials, the Cochrane Database of Systematic Reviews, PubMed, and Scopus were searched for articles published up to June 2018. After removing the duplicates, two of the authors screened the titles and abstracts independently. Assessing the eligibility of the selected full texts was also conducted by two of the authors independently. Disagreements were resolved by discussion. Modified version of Cochrane's risk of bias tool was used to assess the quality of studies. Fifteen studies were selected. RESULTS: Overall, bleaching with CP decreased the SBS by around 2MPa (P<0.0001). Using 10% CP decreased the SBS of the immediately bonded brackets by 5.13MPa (P<0.005). This value was 1.67MPa when the bonding procedure was postponed by one day (P<0.0001). Postponing the bonding procedure for longer periods did not cause a statistically significant change in SBS. Using 11-16% CP, the reduction in SBS of the immediately bonded brackets was 8.51MPa (P<0.01). The SBS decreased by 4.12MPa when the bonding procedure was postponed for 20days (P<0.05). According to one study, use of CP with>16% concentration seemed not to affect the SBS. CONCLUSIONS: Bleaching with CP decreases the SBS, especially if the bracket bonding is performed shortly after bleaching. However, given the small number of articles interpretation should be made with caution.
Asunto(s)
Peróxido de Carbamida/farmacología , Soportes Ortodóncicos , Resistencia al Corte/efectos de los fármacos , Cementos Dentales , Análisis del Estrés Dental , Técnicas In Vitro , Sesgo de PublicaciónRESUMEN
OBJECTIVE: To determine the influence of the home bleaching agent, Opalescence PF, on the surface roughness and microhardness of glazed glassy matrix CAD-CAM ceramics. Materials and Methods. The 28 sintered leucite- and lithium disilicate-reinforced ceramic specimens (IPS Empress CAD and IPS e.max CAD) were divided into control and bleached groups. The home bleaching agent was applied to specimens of bleached groups for 7 days. The surface roughness and microhardness of all specimens were measured. A scanning electron microscope was used to evaluate the surface properties. The data were statistically analyzed by two-way ANOVA. RESULTS: The control e.max CAD showed the lowest surface roughness values. For both Empress and e.max CAD, surface roughness was significantly higher for the bleached group (p < 0.05). No significant differences in microhardness were observed. CONCLUSIONS: According to our study, patients should be careful when using home bleaching agents because whitening agents can affect the mechanical properties of full ceramic restorations like e.max CAD and Empress CAD. Ceramic polishing may be required in clinical situations where ceramic restorations are accidentally exposed to bleaching gels.
Asunto(s)
Blanqueadores/química , Peróxido de Carbamida/química , Cerámica/química , Blanqueadores/farmacología , Peróxido de Carbamida/farmacología , Humanos , Microscopía Electrónica de Rastreo , Propiedades de Superficie/efectos de los fármacosRESUMEN
The aim of this study is to analyze the efficacy of natural bleaching agents and the current technological development in this research field. Two reviewers performed a literature search up to July 2019 in 15 databases. Five laboratory studies and 25 patents were included. Data regarding natural bleaching agent used, application protocol, and the main findings of studies were analyzed. Laboratory studies that evaluated natural bleaching agents' peroxide-free or associated to peroxides and patents related to natural bleaching agents were included. The studies evaluated papain, bromelain, chlorine dioxide, sodium chloride plus vinegar and sodium bicarbonate as peroxide-free agents; and sweet potato extract, lactoperoxidase, and peroxidase associated to peroxide used were included. Twenty-five patents were included; among the most cited are the papain and the chlorine. The addition of non-peroxide agents into peroxide showed improvement in bleaching effect with the incorporation of these non-peroxide agents (p < .05). On the other hand, peroxide-free agents did not show an improvement in bleaching effect (p < .05). The evidence in literature suggested that natural bleaching agents incorporated to peroxide may improve the bleaching. Therefore, the current literature does not support the use of natural agents as dental bleaching.
Asunto(s)
Peróxido de Carbamida/uso terapéutico , Peróxido de Hidrógeno/uso terapéutico , Blanqueadores Dentales/uso terapéutico , Peróxido de Carbamida/farmacología , Humanos , Peróxido de Hidrógeno/farmacologíaRESUMEN
ABSTRACT This study evaluated enamel mineral content and surface microhardness before and after bleaching treatment using 10% carbamide peroxide (CP) containing calcium (Ca) or amorphous calcium phosphate (ACP). Thirty-six bovine slabs were randomly allocated into 3 groups (n = 12) according to bleaching treatment: G1 - Opalescence PF 10% (CP), G2 -NiteWhite ACP (CP+ACP), and G3 - Opalescence PF (10%) with calcium (CP+CA). The bleaching agent was applied on enamel surface for 6 h/day over a period of 21 days. Enamel surface was evaluated by Knoop microhardness (KNH) and micro energy-dispersive X-ray fluorescence spectrometry (p-EDXRF) at baseline and at after bleaching treatment. Data were statistically analyzed by repeated measures ANOVA and Tukey's test (a = 0.05). There was a significant decrease in microhardness after bleaching treatments for all study groups, but no difference between bleaching gels. There was no difference in the Ca/P ratio measured by p-EDXRF for all groups at the study times, but the mean value was lower in group CP+CA than in group CP+ACP. Group CP was similar to both CP+ACP and CP+CA. It can be concluded that enamel microhardness decreased after the bleaching process, regardless of the presence of calcium or ACP, but there was no significant change in the Ca/P ratio of enamel after bleaching for each tested gel. This indicates that the bleaching gels have erosive potential, causing softening of enamel without promoting surface loss, regardless of the presence of calcium of ACP ions.
RESUMO Este estudo avaliou o conteúdo mineral do esmalte e a microdureza superficial antes e após o tratamento clareador, utilizando peróxido de carbamida 10% (PC) contendo cálcio (Ca) ou fosfato de cálcio amorfo (ACP) em sua composigao. Trinta e seis espécimes de esmalte bovino foram alocados aleatoriamente em 3 grupos (n = 12) de acordo com os tratamentos clareadores: G1 - Opalescence PF 10% (CP), G2 -NiteWhite (CP+ACP); e G3 - Opalescence PF (10%) com cálcio (CP + CA). O agente clareador foi aplicado na superficie do esmalte por 6 h/dia por um periodo de 21 dias. A superficie do esmalte foi avaliada por microdureza Knoop (KNH) e espectrometria de fluorescencia de raios X micro-dispersiva (p-EDXRF) no inicio e após o tratamento clareador. Os dados foram analisados estatisticamente pelo teste ANOVA de medidas repetidas e Tukey (a = 0,05). Houve uma diminuigao significativa da microdureza após os tratamentos clareadores para todos os grupos estudados, mas nao houve diferenga entre os diferentes géis. Nao houve diferenga da relagao Ca/P mensurada por p-EDXRF para todos os grupos nos tempos estudados; no entanto, o grupo CP+CA apresentou menor valor comparado ao grupo CP+ACP. O grupo CP foi similar aos grupos CP+ACP e CP+CA. Portanto, pode-se concluir que houve redugao significativa da microdureza do esmalte após o clareamento, independente da presenga de cálcio ou APC na composigao dos géis, embora nao tenha havido alteragao significando na relagao Ca/P do esmalte após o clareamento. Isto indica um potencial erosivo dos géis clareadores, causando o amolecimento sem perda da estrutura do esmalte, independente da presenga dos íons cálcio e ACP.
Asunto(s)
Animales , Bovinos , Fosfatos de Calcio/farmacología , Calcio/uso terapéutico , Desmineralización Dental/inducido químicamente , Esmalte Dental/efectos de los fármacos , Blanqueadores Dentales/farmacología , Peróxido de Carbamida/farmacología , Blanqueamiento de Dientes/métodos , Remineralización Dental , Urea/uso terapéutico , Distribución Aleatoria , Esmalte Dental/anatomía & histología , Dureza , Peróxido de Hidrógeno/uso terapéuticoRESUMEN
Carbamide peroxide is the popular home dental whitening agent. However, it has critical stability. Nanoparticles have been applied to develop products with advantages properties as better efficacy and stability increase. The aim of this study was the characterization of carbamide peroxide polymeric nanoparticles, their bleaching efficacy, effects on pulp damage and stability evaluation. Particle size demonstrated a spherical morphology and bimodal distribution (11 and 398 nm). Nanoparticles presented high entrapment efficiency (98.94%) and the zeta potential value was slightly positive (+10.26 mV). Regardless of the zeta potential, the steric effect may contribute to carbamide peroxide nanoparticle stabilization. The stability studies conducted at room temperature suggested that carbamide peroxide nanoparticles could maintain all the parameters evaluated (size, polydispersity index, zeta potential, entrapment efficiency, pH and content) for at least 90 days. Instability index was determined by dispersion analyzer (LUMiSizer ®), was 0.018, and the light transmission profile did not present sedimentation. Carbamide peroxide nanoparticles were able to prevent thermal degradation and photostability. Clinical efficacy of the whitening gels was obtained by color change in the spectrophotometer and the results showed that all the evaluated gels containing the nanoparticles (0, 1, 2 and 5% of real carbamide peroxide) were effective at bleaching after 2 h of home whitening treatment (during 30 days). After the treatment, the extracted teeth showed no in situ pulp damage by histological evaluation. The nanotechnology strategy of converting carbamide peroxide into polymeric nanoparticles revealed a new product with improved stability, a good approach for carbamide peroxide delivery.
Asunto(s)
Peróxido de Carbamida/farmacología , Nanopartículas/química , Blanqueamiento de Dientes , Pulpa Dental/efectos de los fármacos , Nanopartículas/ultraestructura , TemperaturaRESUMEN
This work aimed to evaluate the roughness, microhardness, ultrastructure, chemical composition and crystalline structure in submitted teeth to a prolonged home bleaching regimen with 10% carbamide peroxide (10% PC) for different periods. The specimens were divided into the following groups: G1: negative control (application of water-soluble gel); G2: tooth whitening group (positive control), under application time recommended by the manufacturer (4h/14 days); G3: prolonged whitening 50%, under prolonged time recommended by the manufacturer in 50% (4h/21 days); G4: excessive whitening 100%, under exceeded manufacturer recommended time by 100% (4h/ 28 days). The results were evaluated descriptively and analytically. There were no changes in the roughness in any of the evaluated groups. However, the microhardness decreased in the G4 group. Scanning electron microscopy showed changes in the enamel surface of groups G2, G3 and G4. Dispersive X-ray spectroscopy identified changes in the concentration of chemical elements O, Mg, P, K in all groups. Thus, this study showed that prolonged home bleaching could cause changes in the ultrastructure, chemical composition and microhardness of the enamel.
Asunto(s)
Peróxido de Carbamida/farmacología , Esmalte Dental , Dureza/efectos de los fármacos , Blanqueamiento de Dientes , Animales , Bovinos , Esmalte Dental/metabolismo , Esmalte Dental/ultraestructura , Microscopía Electrónica de Rastreo , Propiedades de Superficie/efectos de los fármacosRESUMEN
STATEMENT OF PROBLEM: Whether tooth whitening alters the surface topography of enamel causing an increase in surface roughness that could increase susceptibility to restaining is unclear. PURPOSE: The purpose of this in vitro study was to evaluate whether immersing enamel in common solutions produces a color change of ΔE greater than 2; whether the highest concentration carbamide peroxide bleaching agent produces the greatest ΔE; whether bleaching increases the susceptibility to further staining by common solutions; and whether morphologic changes to the enamel surface are observed after staining and bleaching as evidenced by scanning electron microscopy (SEM) analysis and energy-dispersive X-ray spectroscopy (EDS). MATERIAL AND METHODS: Forty-five extracted human teeth were immersed in 5 solutions (wine, coffee, tea, soda, and water) for 15 days at 80°C, and the change in ΔE was assessed with a colorimeter. The teeth were bleached using different concentrations of carbamide peroxide (20%, 35%, and 44%) and ΔE was measured at different time intervals. The teeth were then restained with the same solutions. The ΔE after initial staining was compared with the ΔE after bleaching and restaining of the same teeth. SEM was performed at baseline, after staining, bleaching, and restaining to evaluate the changes in the enamel surface topography. EDS was used to determine the elemental composition of tooth surfaces after restaining. RESULTS: All liquids caused a ΔE greater than 2 after 15 days. The concentration of bleaching agent was not significantly associated with ΔE for any stain types. No significant difference was found in the rate of staining between initial staining and restaining after bleaching. However, a significant effect of time was found for the staining, where the overall ΔE increased by 0.34 for each day in the solution (P<.001). SEM images showed no major changes to enamel topography after bleaching. However, a coating was noted on teeth stained with wine and tea, which had different elemental compositions when compared with the tooth surface. CONCLUSIONS: Based on SEM observation, bleaching teeth with carbamide peroxide does not increase the susceptibility of enamel to staining and does not alter the topography of the enamel. Using higher bleaching concentrations did not increase tooth whitening as a function of time.