Evaluating micronized adipose tissue niche and artificial dermis grafts following nonmelanoma skin cancer excision: a pilot study.

BACKGROUND: Recently, micronized adipose tissue (MAT) grafts have shown promising results in wound healing, including diabetic ulcers. OBJECTIVE: To assess the possibility of using 3D printed MAT niche grafts in the management of skin and soft tissue defects resulting from non-melanoma skin cancer (NMSC) resections. MATERIALS AND METHODS: A retrospective feasibility study was conducted on patients with skin and soft tissue defects resulting from NMSC resections. Twenty-one patients were treated using either artificial dermis (n = 11) or MAT niche (n = 10) grafting. Healing time and POSAS scores were compared. The Mann-Whitney U test and the Pearson chi-square test were used in statistical analysis to compare between and within groups based on preoperative and postoperative measurements. RESULTS: Wounds in the MAT niche group reepithelialized significantly faster than those in the artificial dermis group (mean [SD] 39.2 [11.4] days vs 63.7 [34.8] days; P = .04). In the 21 scar parameters evaluated, the MAT niche group demonstrated significantly superior outcomes in only 2 parameters based on operator assessment scores: relief (mean [SD] 1.6 [0.7] vs 2.2 [0.6]; P = .047) and scar contracture (mean [SD] 1.3 [0.5] vs 2.5 [1.0]; P = .011). CONCLUSION: This study proves the feasibility of exploring the effects of MAT niche grafting following NMSC excision on healing time and specific parameters of scarring, including scar relief and scar contracture.

Use of Integra® on avascular tissue.

Integra® (Integra LifeSciences) is a well-known dermal regeneration template used in partial and full-thickness wound reconstruction. It can be applied directly on to vascular tissue to create a bed for a skin graft, which is often placed in a second surgery. We present our experience of its novel use in oral and maxillofacial surgery patients, using it directly on bone and cartilage (avascular tissue) without further skin grafting. Patients who required full-thickness excision of lesions down to bone or cartilage and who were treated using Integra® were included. After scalp or ear lesion resection, the collagenous dermal layer of Integra® was placed directly on to bone or cartilage and, along with its outer silicone epidermal layer, secured to the defect with absorbable sutures and a bolster dressing. The wounds were kept dry for 14 days, at which point the dressing and silicone were removed and patients continued regular wound care. Seventeen patients were included, 15 of whom had squamous cell carcinoma. One was lost to follow up. The rest achieved complete healing of the defect. Histology showed epidermis developing on the Integra® surface and at one year, the appearance of normal scarred skin. This novel approach could redefine the uses of Integra®, avoiding the need for free-flap surgery or skin grafting when reconstructing large defects. Further resection of close margins or recurrence is easier after reconstruction using dermal regeneration material than after reconstruction with a local or free flap.

Three-dimensional bioprinting of tissue-engineered skin: Biomaterials, fabrication techniques, challenging difficulties, and future directions: A review.

As an emerging new manufacturing technology, Three-dimensional (3D) bioprinting provides the potential for the biomimetic construction of multifaceted and intricate architectures of functional integument, particularly functional biomimetic dermal structures inclusive of cutaneous appendages. Although the tissue-engineered skin with complete biological activity and physiological functions is still cannot be manufactured, it is believed that with the advances in matrix materials, molding process, and biotechnology, a new generation of physiologically active skin will be born in the future. In pursuit of furnishing readers and researchers involved in relevant research to have a systematic and comprehensive understanding of 3D printed tissue-engineered skin, this paper furnishes an exegesis on the prevailing research landscape, formidable obstacles, and forthcoming trajectories within the sphere of tissue-engineered skin, including: (1) the prevalent biomaterials (collagen, chitosan, agarose, alginate, etc.) routinely employed in tissue-engineered skin, and a discerning analysis and comparison of their respective merits, demerits, and inherent characteristics; (2) the underlying principles and distinguishing attributes of various current printing methodologies utilized in tissue-engineered skin fabrication; (3) the present research status and progression in the realm of tissue-engineered biomimetic skin; (4) meticulous scrutiny and summation of the extant research underpinning tissue-engineered skin inform the identification of prevailing challenges and issues.

Skin graft with dermis and appendages generated in vivo by cell competition.

Autologous skin grafting is a standard treatment for skin defects such as burns. No artificial skin substitutes are functionally equivalent to autologous skin grafts. The cultured epidermis lacks the dermis and does not engraft deep wounds. Although reconstituted skin, which consists of cultured epidermal cells on a synthetic dermal substitute, can engraft deep wounds, it requires the wound bed to be well-vascularized and lacks skin appendages. In this study, we successfully generate complete skin grafts with pluripotent stem cell-derived epidermis with appendages on p63 knockout embryos' dermis. Donor pluripotent stem cell-derived keratinocytes encroach the embryos' dermis by eliminating p63 knockout keratinocytes based on cell-extracellular matrix adhesion mediated cell competition. Although the chimeric skin contains allogenic dermis, it is engraftable as long as autologous grafts. Furthermore, we could generate semi-humanized skin segments by human keratinocytes injection into the amnionic cavity of p63 knockout mice embryos. Niche encroachment opens the possibility of human skin graft production in livestock animals.

Bioengineering Skin Substitutes for Wound Management-Perspectives and Challenges.

Non-healing wounds and skin losses constitute significant challenges for modern medicine and pharmacology. Conventional methods of wound treatment are effective in basic healthcare; however, they are insufficient in managing chronic wound and large skin defects, so novel, alternative methods of therapy are sought. Among the potentially innovative procedures, the use of skin substitutes may be a promising therapeutic method. Skin substitutes are a heterogeneous group of materials that are used to heal and close wounds and temporarily or permanently fulfill the functions of the skin. Classification can be based on the structure or type (biological and synthetic). Simple constructs (class I) have been widely researched over the years, and can be used in burns and ulcers. More complex substitutes (class II and III) are still studied, but these may be utilized in patients with deep skin defects. In addition, 3D bioprinting is a rapidly developing method used to create advanced skin constructs and their appendages. The aforementioned therapies represent an opportunity for treating patients with diabetic foot ulcers or deep skin burns. Despite these significant developments, further clinical trials are needed to allow the use skin substitutes in the personalized treatment of chronic wounds.

Burns in the Elderly.

Burns in the elderly are a significant cause of morbidity and mortality. Frailty is an important indicator of patient health and physiologic reserve. Comorbidities and typical age-related changes significantly impact the outcomes of elderly burn patients and decisions made during their burn care. It is essential to have early and thorough discussions about the goals of care and rehabilitation plans. Physiologic changes that occur from aging cause slower wound healing and may make operative treatment more challenging, although techniques such as autographing, skin substitutes, and flaps may all play a role in treating this patient population.

Skin Substitutes and Autograft Techniques: Temporary and Permanent Coverage Solutions.

Coverage of burn wounds is crucial to prevent sequalae including dehydration, wound infection, sepsis, shock, scarring, and contracture. To this end, numerous temporary and permanent options for coverage of burn wounds have been described. Temporary options for burn coverage include synthetic dressings, allografts, and xenografts. Permanent burn coverage can be achieved through skin substitutes, cultured epithelial autograft, ReCell, amnion, and autografting. Here, we aim to summarize the available options for burn coverage, as well as important considerations that must be made when choosing the best reconstructive option for a particular patient.

Challenges in the Management of Large Burns.

Large burns provoke profound pathophysiological changes. Survival rates of patients with large burns have improved significantly with the advancement of critical care and adaptation of early excision protocols. Nevertheless, care of large burn wounds remains challenging secondary to limited donor sites, prolonged time to wound closure, and immunosuppression. The development of skin substitutes and new grafting techniques decreased time to wound closure. Individually, these methods have limited success, but a combination of them may yield more successful outcomes. Early identification of patients with likely poor prognosis should prompt goals of care discussion and involvement of a palliative care team when possible.

NovoSorb® Biodegradable Temporising Matrix (BTM): What we learned from the first 300 consecutive cases.

INTRODUCTION: Extensive full-thickness soft-tissue defects remain a challenge in reconstructive surgery. NovoSorb® Biodegradable Temporising Matrix (BTM) represents a novel dermal substitute and was evaluated in wounds deriving from different aetiologies and to highlight risk factors for poor take rates. METHODS: All patients treated with BTM at our department between March 2020 and October 2022 were included. Differences in univariate and linear regression models identified predictors and risk factors for take rates of BTM and split-thickness skin grafts (STSG). RESULTS: Three hundred patients (mean age 54.2 ± 20.1 years, 66.3% male, 59.7% burns, 19.7% trauma and 20.6% others) were evaluated. Mean take rates of BTM and STSG after BTM delamination were 82.7 ± 25.2% and 86.0 ± 22.6%, respectively. Multiple regression analyses showed that higher body mass index (BMI, OR 0.43, 95% CI 0.86, -0.01, p = 0.44), prior allograft transplantation (OR 15.12, 95% CI 26.98, -3.31, p = 0.041), longer trauma-to-BTM-application intervals (OR 0.01, 95% CI 0.001, -0.001, p = 0.038), positive wound swabs before BTM (OR 7.15, 95% CI 13.50, -0.80, p = 0.028) and peripheral artery disease (OR 10.80, 95% CI 18.63, -2.96, p = 0.007) were associated with poorer BTM take. Higher BMI (OR 0.40, 95% CI 0.76, -0.08, p = 0.026), increasing BTM graft surface areas (OR 0.58, 95% CI -1.00, -0.17, p = 0.005), prior allograft (OR 12.20, 95% CI -21.99, -2.41, p = 0.015) or autograft transplantations (OR 22.42, 95% CI 38.69, -6.14, p = 0.001), tumour as the aetiology of the wound (OR 37.42, 95% CI 57.41, -17.83, p = 0.001), diabetes (OR 6.64, 95% CI 12.80, -0.48, p = 0.035) and impaired kidney function (OR 5.90, 95% CI 10.94, -0.86, p = 0.021) were associated with poorer STSG take after delamination of BTM, whereas higher BTM take rates were associated with better STSG take (OR 0.40, 95% CI 0.31,0.50, p < 0.001). CONCLUSION: Extensive complex wounds of different aetiologies unsuitable for immediate STSG can be successfully reconstructed by means of two-staged BTM application and subsequent skin grafting. Importantly, presence of wound contamination or infection and prior allograft coverage appear to jeopardise good BTM and STSG take.

Development of a novel human stratum corneum mimetic phospholipid -vesicle-based permeation assay models for in vitro permeation studies.

OBJECTIVES: To develop and evaluate a novel human stratum corneum (SC) mimetic phospholipid vesicle-based permeation assay (PVPASC) model for in vitro permeation studies. SIGNIFICANCE: Due to the increasing restrictions on the use of human and animal skins, artificial skin models have attracted substantial interest in pharmaceuticals and cosmetic industries. In this study, a modified PVPASC model containing both SC lipids and proteins was developed. METHODS: The PVPASC model was optimized by altering the lipid composition and adding keratin in the formulation of large liposomes. The barrier properties were monitored by measuring the electrical resistance (ER) and permeability of Rhodamine B (RB). The modified PVPASC model was characterized in terms of the surface topography, solvent influence and storage stability. The permeation studies of the active components in Compound Nanxing Zhitong Plaster (CNZP) were performed to examine the capability of PVPASC in the application of skin penetration. RESULTS: The ER and Papp values of RB obtained from the optimized PVPASC model indicated a similar barrier property to porcine ear skin. Scanning electron microscope analysis demonstrated a mimic 'brick-and-mortar' structure. The PVPASC model can be stored for three weeks at -20 °C, and withstand the presence of different receptor medium for 24 h. The permeation studies of the active components demonstrated a good correlation (r2 = 0.9136) of Papp values between the drugs' permeation through the PVPASC model and porcine ear skin. CONCLUSION: Keratin contained composite phospholipid vesicle-based permeation assay models have been proven to be potential skin tools in topical/transdermal permeation studies.

Biomimetic tri-layered artificial skin comprising silica gel-collagen membrane-collagen porous scaffold for enhanced full-thickness wound healing.

Full-thickness wounds are severe cutaneous damages with destroyed self-healing function, which need efficient clinical interventions. Inspired by the hierarchical structure of natural skin, we have for the first time developed a biomimetic tri-layered artificial skin (TLAS) comprising silica gel-collagen membrane-collagen porous scaffold for enhanced full-thickness wound healing. The TLAS with the thickness of 3-7 mm displays a hierarchical nanostructure consisting of the top homogeneous silica gel film, the middle compact collagen membrane, and the bottom porous collagen scaffold, exquisitely mimicking the epidermis, basement membrane and dermis of natural skin, respectively. The 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide/N-Hydroxysuccinimide-dehydrothermal (EDC/NHS-DHT) dual-crosslinked collagen composite bilayer, with a crosslinking degree of 79.5 %, displays remarkable biocompatibility, bioactivity, and biosafety with no risk of hemolysis and pyrogen reactions. Notably, the extra collagen membrane layer provides a robust barrier to block the penetration of silica gel into the collagen porous scaffold, leading to the TLAS with enhanced biocompatibility and bioactivity. The full-thickness wound rat model studies have indicated the TLAS significantly facilitates the regeneration of full-thickness defects by accelerating re-epithelization, collagen deposition and migration of skin appendages. The highly biocompatible and bioactive tri-layered artificial skin provides an improved treatment for full-thickness wounds, which has great potential in tissue engineering.

Improving stability of human three dimensional skin equivalents using plasma surface treatment.

In developing three-dimensional (3D) human skin equivalents (HSEs), preventing dermis and epidermis layer distortion due to the contraction of hydrogels by fibroblasts is a challenging issue. Previously, a fabrication method of HSEs was tested using a modified solid scaffold or a hydrogel matrix in combination with the natural polymer coated onto the tissue culture surface, but the obtained HSEs exhibited skin layer contraction and loss of the skin integrity and barrier functions. In this study, we investigated the method of HSE fabrication that enhances the stability of the skin model by using surface plasma treatment. The results showed that plasma treatment of the tissue culture surface prevented dermal layer shrinkage of HSEs, in contrast to the HSE fabrication using fibronectin coating. The HSEs from plasma-treated surface showed significantly higher transepithelial electrical resistance compared to the fibronectin-coated model. They also expressed markers of epidermal differentiation (keratin 10, keratin 14 and loricrin), epidermal tight junctions (claudin 1 and zonula occludens-1), and extracellular matrix proteins (collagen IV), and exhibited morphological characteristics of the primary human skins. Taken together, the use of plasma surface treatment significantly improves the stability of 3D HSEs with well-defined dermis and epidermis layers and enhanced skin integrity and the barrier functions.

La matriz extracelular en la curación de las heridas cutáneas. Aspectos físicos, químicos y biológicos / Extracellular matrix in healing of cutaneous wounds. Physical, chemical and biological aspects

Se revisan los nuevos conocimientos sobre la matriz extracelular (MEC), que han permitido descubrir su importante rol en la cicatrización de las heridas cutáneas. Se describen sus características morfofisiológicas y cómo interviene en la curación de las heridas cutáneas. Se presentan cuatro casos clínicos en los que se aplicó este enfoque terapéutico: los sustitutos de piel y la "cura húmeda"

We review the new knowledge about the extracellular ma-trix (ECM) that has allowed us to discover its important role in the healing of cutaneous wounds. The morpho-physiological characteristics of ECM and its role in the healing of cutaneous wounds are described. Four clinical cases are presented where this therapeutic approach was applied: the skin substitutes and the "moist wound healing".

Biomimetic Multimodal Receptors for Comprehensive Artificial Human Somatosensory System.

Electronic skin (e-skin) capable of acquiring environmental and physiological information has attracted interest for healthcare, robotics, and human-machine interaction. However, traditional 2D e-skin only allows for in-plane force sensing, which limits access to comprehensive stimulus feedback due to the lack of out-of-plane signal detection caused by its 3D structure. Here, a dimension-switchable bioinspired receptor is reported to achieve multimodal perception by exploiting film kirigami. It offers the detection of in-plane (pressure and bending) and out-of-plane (force and airflow) signals by dynamically inducing the opening and reclosing of sensing unit. The receptor's hygroscopic and thermoelectric properties enable the sensing of humidity and temperature. Meanwhile, the thermoelectric receptor can differentiate mechanical stimuli from temperature by the voltage. The development enables a wide range of sensory capabilities of traditional e-skin and expands the applications in real life.

Syndactyly Reconstruction Technique Utilizing Skin Substitute.

Syndactyly reconstruction often times leaves areas of skin deficit that require coverage for healing. Numerous techniques have been reported to address the deficits, including graftless technique, which utilizes mobilization of adjacent skin for coverage, full-thickness skin grafting, and skin substitute grafts. The technique described here demonstrates the ease of the use of skin substitutes for coverage in syndactyly reconstruction and reports the expected outcomes.

Development of pro-angiogenic skin substitutes for wound healing.

Wounds pose significant challenges to public health, primarily due to the loss of the mechanical integrity and barrier function of the skin and impaired angiogenesis, causing physical morbidities and psychological trauma to affect patients. Reconstructing the vasculature of the wound bed is crucial for promoting wound healing, reducing scar formation and enhancing the quality of life for patients. The development of pro-angiogenic skin substitutes has emerged as a promising strategy to facilitate vascularization and expedite the healing process of burn wounds. This review provides an overview of the various types of skin substitutes employed in wound healing, explicitly emphasising those designed to enhance angiogenesis. Synthetic scaffolds, biological matrices and tissue-engineered constructs incorporating stem cells and primary cells, cell-derived extracellular vesicles (EVs), pro-angiogenic growth factors and peptides, as well as gene therapy-based skin substitutes are thoroughly examined. The review summarises the existing challenges, future directions and potential innovations in pro-angiogenic dressing for skin substitutes. It highlights the need for continued research to develop new technologies and combine multiple strategies and factors, and to overcome obstacles and advance the field, ultimately leading to improved outcomes for wound patients.

Cancer Spheroids Embedded in Tissue-Engineered Skin Substitutes: A New Method to Study Tumorigenicity In Vivo.

Tumorigenic assays are used during a clinical translation to detect the transformation potential of cell-based therapies. One of these in vivo assays is based on the separate injection of each cell type to be used in the clinical trial. However, the injection method requires many animals and several months to obtain useful results. In previous studies, we showed the potential of tissue-engineered skin substitutes (TESs) as a model for normal skin in which cancer cells can be included in vitro. Herein, we showed a new method to study tumorigenicity, using cancer spheroids that were embedded in TESs (cTES) and grafted onto athymic mice, and compared it with the commonly used cell injection assay. Tumors developed in both models, cancer cell injection and cTES grafting, but metastases were not detected at the time of sacrifice. Interestingly, the rate of tumor development was faster in cTESs than with the injection method. In conclusion, grafting TESs is a sensitive method to detect tumor cell growth with and could be developed as an alternative test for tumorigenicity.

Real-world data analysis of bilayered living cellular construct and fetal bovine collagen dressing treatment for pressure injuries: a comparative effectiveness study.

Aim: To determine the effectiveness of bilayered living cellular construct (BLCC) versus a fetal bovine collagen dressing (FBCD) in pressure injuries (PRIs). Methods: A real-world data study was conducted on 1352 PRIs analyzed digitally. 1046 and 306 PRIs were treated with BLCC and FBCD, respectively. Results: Cox healing for BLCC (n = 1046) was significantly greater (p < 0.0001) at week 4 (13 vs 7%), 8 (29 vs 17%), 12 (42 vs 27%), 24 (64 vs 45%), and 36 (73 vs 56%). The probability of healing increased by 66%, (hazard ratio = 1.66 [95% CI (1.38, 2.00)]; p < 0.0001. Time to healing was 162 days for FBCD and 103 days for BLCC showing a 36% reduction in time to healing with BLCC; (p < 0.0001). Conclusion: BLCC significantly improved healing of PRIs versus FBCD.

Determination of potential dermal exposure rates of phosphorus flame retardants via the direct contact with a car seat using artificial skin.

Dermal exposure to phosphorus flame retardants (PFRs) has received much attention as a major alternative exposure route in recent years. However, the information regarding dermal exposure via direct contact with a product is limited. In addition, in the commonly used dermal permeability test, the target substance is dissolved in a solvent, which is unrealistic. In this study, a dermal permeability test of PFRs in three car seats was performed using artificial skin. The PFR concentrations in the car seats are 0.12 wt% tris(2-chloroethyl) phosphate (TCEP), 0.030-0.25 wt% tris(2-chloroisopropyl) phosphate (TCPP), 0.15 wt% triphenyl phosphate (TPhP), 0.89 wt% cresyl diphenyl phosphate (CsDPhP), 0.074 wt% tricresyl phosphate (TCsP), and 0.46-4.7 wt% diethylene glycol bis [di (2-chloroisopropyl) phosphate (DEG-BDCIPP). The mean skin permeation rates for a contact time of 24 h are 14 (TCEP), 5.4-160 (TCPP), 0.67 (CsDPhP), 0.38 (TPhP), and 3.3-58 ng cm-2 h-1 (DEG-BDCIPP). The concentrations of TCsP in receptor liquid were lower than the limit of quantification at the contact time of 24 h. The skin permeation rates were significantly affected by the type of car seat (e.g., fabric or non-fabric). The potential dermal TCPP exposure rate for an adult via direct contact with the car seat during the average daily contact time (1.3 h), which was the highest value assessed in this study, was estimated to be 16,000 ng kg-1 day-1, which is higher than that related to inhalation and dust ingestion reported as significant exposure route of PFRs in previous studies. These facts reveal that dermal exposure associated with direct contact with the product might be an important exposure pathway for PFRs.

A multimodal magnetoelastic artificial skin for underwater haptic sensing.

Future exploitation of marine resources in a sustainable and eco-friendly way requires autonomous underwater robotics with human-like perception. However, the development of such intelligent robots is now impeded by the lack of adequate underwater haptic sensing technology. Inspired by the populational coding strategy of the human tactile system, we harness the giant magnetoelasticity in soft polymer systems as an innovative platform technology to construct a multimodal underwater robotic skin for marine object recognition with intrinsic waterproofness and a simple configuration. The bioinspired magnetoelastic artificial skin enables multiplexed tactile modality in each single taxel and obtains an impressive classification rate of 95% in identifying seven types of marine creatures and marine litter. By introducing another degree of freedom in underwater haptic sensing, this work represents a milestone toward sustainable marine resource exploitation.