Heparin-Calibrated Anti-Factor Xa Assay for the Measurement of Direct Anticoagulants such as Apixaban, Rivaroxaban, and Edoxaban.

BACKGROUND: The first purpose of this study was to determine whether a measurement of the level of direct oral anticoagulants (DOACs) was possible with heparin-calibrated chromogenic anti-factor Xa activity (AXA). The second purpose of this study was to evaluate whether the antidote treatment decision level (30 or 50 ng/mL of DOAC) can be determined by unfractionated heparin (UHF)/low molecular weight heparin (LMWH)-calibrated AXA. METHODS: AXA was measured by using two reagents and dedicated analyzers (Sysmex CS-5100 analyzer and STA R Max3). Four types of calibrators were used: 1) Stago DOAC (rivaroxaban, edoxaban, and apixaban)-specific calibrator, 2) Stago LMWH calibrator, 3) Sysmex UHF calibrator, and 4) Sysmex LMWH calibrator. Regression analysis was used between assays. Receiver operating characteristic (ROC) curves were performed, and the concordance rate was calculated. RESULTS: The correlation coefficients were in the range of 0.75 - 0.91 for rivaroxaban and 0.81 - 0.94 for apixaban. The correlation coefficient between edoxaban-calibrated AXA and Sysmex LMWH/Sysmex UHF calibrator-calibrated AXA was low (r = 0.47). Overall correlation between DOAC-calibrated AXA and Stago LMWH-calibrated AXA was linear, at only low concentration in all three DOACs. The concordance rate (89.3 - 100%) is good for de-termining the antidote management level by UFH/LMWH-calibrated AXA, compared with those of DOAC-calibrated AXA in rivaroxaban and apixaban. The concordance rate ranged from 63% to 67% between Sysmex UFH/ LMWH-calibrated AXA and edoxaban-calibrated AXA. CONCLUSIONS: The findings of our study suggest limitations in calculating accurate concentrations, when using UFH/LMWH-calibrated AXA to measure DOAC. This study demonstrates that UFH/LMWH-calibrated AXA may be useful in determining the presence of DOACs at the cutoff level for the antidote treatment in rivarovaban and apixaban. However, in edoxaban, UFH/LMWH-calibrated AXA could not accurately measure the presence of DOACs at the cutoff for antidote treatment.

Method Development and Validation of Lorlatinib by RP-HPLC.

A simple, Accurate, precise method was developed for the estimation of the Lorlatinib in API form and Marketed pharmaceutical dosage form by RP-HPLC. Chromatogram was run through Hypersil C18 (4.6mm×150mm, 5µm) Particle size Column and Mobile phase containing Methanol and Water taken in the ratio of 25: 75% v/v was pumped through column at a flow rate of 1.0 ml/min. Temperature was maintained at 38ºC. Optimized wavelength selected was 310 nm. Retention times of Lorlatinib were found to be 3.513 minutes respectively. The %RSD for the Repeatability and Intermediate Precision of the Lorlatinib were found to be within limits. %Recovery was obtained 98.96% and it was found to be within the limits for Lorlatinib respectively. The LOD, LOQ values obtained from regression equations of Lorlatinib were 0.332µg/ml and 1.0078 µg/ml respectively. Regression equation of Lorlatinib was found to be y = 39948x + 16821 respectively. The Retention times was decreased and run time was decreased, so the method developed was simple and economical that can be adopted in regular Quality control test in Industries.

Spatiotemporal distribution, risk levels, and transport variations in neonicotinoids and fipronil and its metabolites cross a river-to-sea continuum.

Neonicotinoids (NEOs) and fipronil are widely used in pest control, but their spatiotemporal distribution and risk levels in the "river-estuary-bay" system remain unclear. Between 2018 and 2021, 148 water samples from rivers to inshore and offshore seawater in Laizhou Bay, China were collected to investigate the presence of eight NEOs and fipronil and its metabolites (FIPs). Significant seasonal variations in NEOs were observed under the influence of different cultivation practices and climatic conditions, with higher levels in the summer than in the spring. The average concentrations of total neonicotinoids (ΣNEOs) and ∑FIPs decreased from rivers (63.64 ng/L, 2.41 ng/L) to inshore (22.62 ng/L, 0.14 ng/L) and offshore (4.48 ng/L, 0.10 ng/L) seawater of Laizhou Bay. The average concentrations of ΣNEOs decreased by 85.3 % from 2018 to 2021. The predominant insecticides in the study area were acetamiprid, thiamethoxam, imidacloprid, and fipronil sulfone, with a gradual shift toward low-toxicity and environmentally friendly species over time. Influenced by agricultural intensity, ∑NEOs were mostly distributed in the Yellow River, Xiaoqing River, and their estuaries, where they pose chronic ecological risks. However, FIP exhibited high risk in certain rivers and sewage treatment plants owing to the use of animal repellents or landscape gardening insecticides. This study provides evidence of the transfer of NEOs and FIPs from rivers to the ocean and also clarifies their transition dynamics and changes in risk levels from rivers to oceans. Additionally, the study offers data support for identifying critical pesticide control areas.

Rapid, Simple and Low-Cost Analytical Method Development for Quantification of Eltrombopag Olamine in Tablet Dosage by UV Spectroscopy Method.

BACKGROUND: Eltrombopag Olamine is a drug used to treat thrombocytopenia, a disorder where blood platelet counts get lower and severe aplastic anemia. It serves as a thrombopoietin receptor agonist, which give rise to platelet production in the bone marrow. OBJECTIVES: The objective of this study is to develop a simple, specific, accurate, precise and economical Ultraviolet spectroscopy method to estimate the amount of Eltrombopag Olamine in bulk and tablet dosage form. METHODS: The developed method was performed using methanol for identification and physicochemical characterization of the drug. The validation parameters like linearity, precision, accuracy, robustness limits of detection and quantitation, and specificity were assessed as per ICH Q2 (R2). RESULTS: The maximum absorbance wavelength (λmax) of the drug was found at 247 nm in methanol. The linearity was found in the concentration range of 2-14 µg/ml with regression equation y = 0.0619x - 0.0123 and r² = 0.999. The standard addition method was used to determine the accuracy of the developed method. The result was found in the % recovery range of 98-99%. The precision was done on λmax with respect to the parameters such as repeatability, intraday, and interday. The method was found to be precise as the % RSD value was found to be <2%. The detection limit value (LOD) and quantitation limit value (LOQ) were 0.0524 µg/ml and 0.1588 µg/ml, respectively. CONCLUSION: The developed method is simple, economical, accurate and selective. The developed method was adaptable for the estimation of Eltrombopag Olamine analysis in pharmaceutical dosage form and routine quality control laboratory.

Transfer and risk assessment of fipronil in laying hen tissues and eggs.

Fipronil is a persistent insecticide known to transfer into hen eggs from exposure from animal drinking water and feed, but some questions remain regarding its transfer behavior and distribution characteristics. Therefore, the dynamic metabolism, residue distribution and transfer factor (TF) of fipronil were investigated in 11 edible tissues of laying hens and eggs over 21 days. After a continuous low-dose drinking water exposure scenario, the sum of fipronil and all its metabolites (defined as fipronilT) quickly transferred to each edible tissue and gradually increased with exposure time. FipronilT residue in eggs first appeared at 3 days and then gradually increased. After a single high-dose feed exposure scenario, fipronilT residue in edible tissues first appeared after 2 h, quickly peaked at 1 day, and then gradually decreased. In eggs, fipronilT residue first appeared at 2 days, peaked 6-7 days and then gradually decreased. The TF values followed the order of the skin (0.30-0.73) > egg yolk (0.30-0.71) > bottom (0.21-0.59) after drinking water exposure, and the order of the skin (1.01-1.59) > bottom (0.75-1.1) > egg yolk (0.58-1.10) for feed exposure. Fipronil sulfone, a more toxic compound, was the predominant metabolite with higher levels distributed in the skin and bottom for both exposure pathways. FipronilT was distributed in egg yolks rather than in albumen owing to its lipophilicity, and the ratio of egg yolk to albumen may potentially reflect the time of exposure. The distinction is that the residues after feed exposure were much higher than that after drinking water exposure in edible tissues and eggs. The study highlights the residual characteristics of two exposure pathways, which would contribute to the tracing of contamination sources and risk assessment.

Simultaneous Determination of Fipronil, Permethrin, and Their Key Related Substances in a Topical Drug Product by a Single Stability-Indicating High-Performance Liquid Chromatography Method.

BACKGROUND: The topical veterinary drug product containing fipronil and permethrin provides an effective repellent protection and high insecticidal efficacy for dogs. OBJECTIVE: The objective of this study was to develop a stability-indicating high-performance liquid chromatography (HPLC) method for simultaneous detection and quantification of fipronil, permethrin, their key degradation products, and butylated hydroxytoluene (BHT) in a topical drug product. METHOD: The two active ingredients, their degradation products, and the antioxidant (BHT) were separated by a gradient elution on a Phenomenex Kinetex C18 column (150 × 3 mm, 2.6 µm particle size) maintained at 37°C with H2O acetonitrile isopropyl alcohol 85% H3PO4 (65.5 + 32.5 + 4/0.0053, v/v/v/v) as mobile phase A and acetonitrile (100%) as mobile phase B. The flow rate was 0.9 mL/min, and analytes were detected and quantified at 235 nm. RESULTS: The specificity of the method was demonstrated by adequate separation of fipronil, permethrin, their degradation products, and BHT in the forced degraded finished product. The linearity of the method was demonstrated in the range of 0.2% to 150% of target analytical concentration of both active ingredients and 50% to 150% for BHT. Excellent recoveries of fipronil, permethrin, and BHT in placebo spiked active ingredient solutions in the linearity range showed sufficient accuracy of the method. The LOQ and LOD of the method were determined to be 0.2% and 0.07% of the analytical concentration. A robustness study did not identify any critical parameter that adversely affected the separation and quantification. CONCLUSIONS: Here, we report the development and validation of a robust, stability-indicating HPLC method for identification and assay of fipronil, permethrin, and BHT, including estimation of fipronil's and permethrin's degradation products in a topical drug product for dogs. HIGHLIGHTS: The new HPLC method permits the acquisition of data for all analytes of interest for a topical finished drug product containing fipronil, permethrin, and BHT.

Development of a Reversed-Phase UPLC Method for Assay of Fipronil Including Determination of Its Related Substances in Bulk Batches of Fipronil Drug Substance.

BACKGROUND: Fipronil is a commonly used pesticide in the agricultural and animal health industries for the protection of crops and control of fleas, ticks, and chewing lice. It is difficult to obtain reproducible retention time and relative retention time (RRT) for a common hydrolytic degradation product of fipronil with the current European Pharmacopeia (EP) monograph for assay and estimation of related substances of fipronil. This situation causes misidentification, mislabeling, and/or false out-of-specification results for this hydrolytic degradation product of fipronil in bulk commercial batches during batch release and/or in the stability samples during the shelf life of a released batch. OBJECTIVE: This study aimed to develop a reversed-phase ultra performance liquid chromatography (UPLC) method for assay and identification of fipronil including identification and estimation of its related substances in bulk drug substance batches of fipronil and provide consistent retention time of the hydrolytic degradation product. METHODS: Fipronil and its related substances were separated by gradient elution on a Halo C18 column (50 mm × 2.1 mm id, 2.0 µm particle size) maintained at 40°C with 0.1% H3PO4 in H2O as mobile phase-A and acetonitrile-methanol (50 + 50, v/v) as mobile phase-B. Fipronil and its related substances were detected and quantified at 280 nm with a quantitation limit of 0.05% of the target (analytical) concentration. RESULTS: The UPLC method was able to separate all analytes of interest by gradient elution with a total run time of 7 min (approximately 40% faster than EP). CONCLUSION: In this paper, we report the development and validation of a fast, stability-indicating reversed-phase UPLC method for assay and estimation of related substances of fipronil in stability samples and bulk batches of fipronil. HIGHLIGHTS: The new UPLC method is approximately 40% faster than the current Ph. Eur. monograph for fipronil assay and the new method provides reproducible retention of a common hydrolytic degradation product of fipronil.

Down-the-drain pathways for fipronil and imidacloprid applied as spot-on parasiticides to dogs: Estimating aquatic pollution.

Fipronil and imidacloprid have been widely detected in UK surface waters in recent years, often at concentrations that ecotoxicological studies have shown can harm aquatic life. Down-the-drain (DTD) passage of pet flea and tick treatments are being implicated as an important source, with many of the UK's 22 million cats and dogs receiving routine, year-round preventative doses containing these parasiticides. The UK Water Industry's 3rd Chemical Investigation Programme (UKWIR CIP3) has confirmed wastewater as a major entry pathway for these chemicals into surface waters, but the routes by which they enter the wastewater system remain unclear. We addressed this knowledge gap by conducting the first quantification of DTD emissions from 98 dogs treated with spot-on ectoparasiticides containing fipronil or imidacloprid, through bathing, bed washing and washing of owners' hands. Both chemicals were detected in 100 % of washoff samples, with bathing accounting for the largest emissions per event (up to 16.8 % of applied imidacloprid and 24.5 % of applied fipronil). Modelled to account for the frequency of emitting activities, owner handwashing was identified as the largest source of DTD emissions from the population overall, with handwash emissions occurring for at least 28 days following product application and an estimated 4.9 % of imidacloprid and 3.1 % of fipronil applied in dog spot-ons passing down-the-drain via this route. The normalised daily per capita emissions for all routes combined were 8.7 µg/person/day for imidacloprid and 2.1 µg/person/day for fipronil, equivalent to 20-40 % of the daily per capita load in wastewater, as estimated from UKWIR CIP3 data. Within the current international regulatory framework adhered to by the UK, the environmental exposure of veterinary medicines intended for use in small companion animals is assumed to be low, and DTD pathways are not considered. We recommend a systematic review of regulations and practices to address this overlooked pollution pathway.

Photodegradation of the insecticide fipronil in aquatic environments: photo-dechlorination processes and products.

Fipronil (FIP) is a phenylpyrazole insecticide that, along with neonicotinoid insecticides, is regularly used worldwide. Photodegradation of FIP in aqueous systems is thought mainly to involve the reaction of desulfinylation to give fipronil desulfinyl (FIP-desulfinyl); however, little is known about further degradation reactions. We investigated FIP photodegradation by analyzing photodegradation products by liquid chromatography and liquid chromatography high-resolution tandem mass spectrometry using an Orbitrap instrument. A wide range of products, including dechlorinated compounds, was detected, and the structures were identified. FIP-desulfinyl has previously been found to be an important and persistent FIP photodegradation product; however, we also found that FIP-desulfinyl was photochemically decomposed to a didechlorinated product via a monodechlorinated product. The main photodegradation pathway was probably similar to that of ethiprole, which has a similar skeleton. The photodegradation rate constant was 22.6 times lower for FIP-desulfinyl (0.00372 min-1) than FIP (0.0839 min-1). The photodegradation rate constant was lower for the newly found didechlorinated product (0.001 min-1 or below) than FIP-desulfinyl, suggesting that the product is persistent in aquatic environments and could be an important indicator of long-term FIP contamination.

A versatile and ultrasensitive molecularly imprinted electrochemiluminescence sensor with HRP-encapsulated liposome labeled by light-triggered click reaction for pesticide residues.

A novel approach for trace detection of fipronil with a molecularly imprinted electrochemiluminescence sensor (MIECLS) is proposed. The sensitivity is significantly improved via signal amplification of the enzymatic reaction of horseradish peroxidase (HRP) released from encapsulated liposomes which linked onto the template molecules after rebinding. The molecularly imprinted polymer membrane was prepared through the electropolymerization of monomers with fipronil as a template. After the elution of the template molecules, the analyte fipronil was reabsorbed into the cavities. HRP-encapsulated liposomes were linked to the target molecules by light-triggered click reaction. The higher the concentration of the target was, the more HRP-encapsulated liposomes were present on the molecularly imprinted polymer (MIP) sensor. Then, HRP was liberated from liposomes, and the catalytic degradation of hydrogen peroxide (H2O2) by HRP occurs, which changed the electrochemiluminescence intensity of luminol significantly. The change of the ∆ECL intensity was linearly proportional to the logarithm of the fipronil concentration ranging from 1.00 × 10-14 to 1.00 × 10-9 mol/L, and the detection limit was 7.77 × 10-16 mol/L. The recoveries obtained ranged from 95.7 to 105.8% with RSD < 5%. The sensitivity of the detection was significantly improved, and the analysis process was simplified in that the incubation step required in the conventional method was avoided. The sensor proposed provides a feasible platform for ultra-trace amount determination.

Persistence and metabolism of the diamide insecticide cyantraniliprole in tomato plants.

Plant uptake and metabolism of pesticides are complex and dynamic processes, which contribute to the overall toxicity of the pesticides. We investigated the metabolic fate of cyantraniliprole, a new diamide class of insecticide, during various growth stages of tomato. Cyantraniliprole was the major residue in leaves, flowers, and fruits, with the relative metabolite-to-parent ratios maintained at < 10% up to 28 days after treatment (DAT). Mature leaves contained consistently higher residues of cyantraniliprole than young leaves throughout the study. Flowers contained the highest cyantraniliprole residues up to 21 DAT, then gradually decreased. Immature green fruits had the highest cyantraniliprole residues (5.3 ± 0.7 ng/g; 42 DAT), and decreased toward red ripening stages (1.4 ± 0.2 ng/g; 84 DAT). Metabolism of cyantraniliprole primarily occurred in the foliage, where 21 metabolites were tentatively identified. Flowers and fruits contained 14 and four of these metabolites, respectively. Major transformation pathways were characterized by ring closure, followed by N-demethylation, and glycosylation. Additionally, plant metabolism of cyantraniliprole was also associated with several minor phase-I, phase-II, and breakdown metabolites. The occurrence of these metabolites in plants varied as a function of tissue types and their developmental stages. Our study highlights a tissue-specific biotransformation and accumulation of metabolites of cyantraniliprole in tomato.

Development of Ecofriendly Derivative Spectrophotometric Methods for the Simultaneous Quantitative Analysis of Remogliflozin and Vildagliptin from Formulation.

Three rapid, accurate, and ecofriendly processed spectrophotometric methods were validated for the concurrent quantification of remogliflozin (RGE) and vildagliptin (VGN) from formulations using water as dilution solvent. The three methods developed were based on the calculation of the peak height of the first derivative absorption spectra at zero-crossing points, the peak amplitude difference at selected wavelengths of the peak and valley of the ratio spectra, and the peak height of the ratio first derivative spectra. All three methods were validated adapting the ICH regulations. Both the analytes showed a worthy linearity in the concentration of 1 to 60 µg/mL and 2 to 90 µg/mL for VGN and RGE, respectively, with an exceptional regression coefficient (r2 ≥ 0.999). The developed methods demonstrated an excellent recovery (98.00% to 102%), a lower percent relative standard deviation, and a relative error (less than ±2%), confirming the specificity, precision, and accuracy of the proposed methods. In addition, validated spectrophotometric methods were commendably employed for the simultaneous determination of VGN and RGE from solutions prepared in the laboratory and the formulation. Hence, these methods can be utilized for the routine quality control study of the pharmaceutical preparations of VGN and RGE in pharmaceutical industries and laboratories. The ecofriendly nature of the anticipated spectrophotometric procedures was confirmed by the evaluation of the greenness profile by a semi-quantitative method and the quantitative and qualitative green analytical procedure index (GAPI) method.

Biodegradation of fipronil: current state of mechanisms of biodegradation and future perspectives.

Fipronil is a broad-spectrum phenyl-pyrazole insecticide that is widely used in agriculture. However, in the environment, its residues are toxic to aquatic animals, crustaceans, bees, termites, rabbits, lizards, and humans, and it has been classified as a C carcinogen. Due to its residual environmental hazards, various effective approaches, such as adsorption, ozone oxidation, catalyst coupling, inorganic plasma degradation, and microbial degradation, have been developed. Biodegradation is deemed to be the most effective and environmentally friendly method, and several pure cultures of bacteria and fungi capable of degrading fipronil have been isolated and identified, including Streptomyces rochei, Paracoccus sp., Bacillus firmus, Bacillus thuringiensis, Bacillus spp., Stenotrophomonas acidaminiphila, and Aspergillus glaucus. The metabolic reactions of fipronil degradation appear to be the same in different bacteria and are mainly oxidation, reduction, photolysis, and hydrolysis. However, the enzymes and genes responsible for the degradation are somewhat different. The ligninolytic enzyme MnP, the cytochrome P450 enzyme, and esterase play key roles in different strains of bacteria and fungal. Many unanswered questions exist regarding the environmental fate and degradation mechanisms of this pesticide. The genes and enzymes responsible for biodegradation remain largely unexplained, and biomolecular techniques need to be applied in order to gain a comprehensive understanding of these issues. In this review, we summarize the literature on the degradation of fipronil, focusing on biodegradation pathways and identifying the main knowledge gaps that currently exist in order to inform future research. KEY POINTS: • Biodegradation is a powerful tool for the removal of fipronil. • Oxidation, reduction, photolysis, and hydrolysis play key roles in the degradation of fipronil. • Possible biochemical pathways of fipronil in the environment are described.

Introducing the Rapid Alert Supply Network Extractor (RASNEX) tool to mine supply chain information from food and feed contamination notifications in Europe.

BACKGROUND: During food or feed contamination events, it is of utmost importance to ensure their rapid resolution to minimize impact on human health, animal health and finances. The existing Rapid Alert System for Food and Feed (RASFF) is used by the European Commission, national competent authorities of member countries and the European Food Safety Authority to report information on any direct or indirect human health risk arising from food or feed, or serious risks to animal health or the environment in relation to feed. Nevertheless, no methods exist to to collectively evaluate this vast source of supply chain information. METHODS: To aid in the extraction, evaluation and visualization of the data in RASFF notifications, we present the Rapid Alert Supply Network Extractor (RASNEX) open-source tool available from https://doi.org/10.5281/zenodo.4322555 freely. Among RASNEX's functions is the graphical mapping of food and feed supply chain operators implicated in contamination events. RASNEX can be used during ongoing events as a support tool for risk analysis using RASFF notifications as input. RESULTS: In a first use case, we showcase the functionality of RASNEX with the RASFF notification on a 2017/2018 contamination event in eggs caused by the illegal use of fipronil. The information in this RASFF notification is used to visualize nine different flows of main and related food products. In a second use case, we combine RASFF notifications from different types of food safety hazards (Salmonella spp., fipronil and others) to obtain wider coverage of the visualized egg supply network compared to the first use case. Actors in the egg supply chain were identified mainly for Italy, Poland and Benelux. Other countries (although involved in the egg supply chain) were underrepresented. CONCLUSIONS: We hypothesize that biases may be caused by inconsistent RASFF reporting behaviors by its members. These inconsistencies may be counteracted by implementing standardized decision-making tools to harmonize decisions whether to launch a RASFF notification, in turn resulting in a more uniform future coverage across European food and feed supply chains with RASNEX.

Quantification of field-incurred residues of cyantraniliprole and IN-J9Z38 in cabbage/soil using QuEChERS/HPLC-PDA and dietary risk assessment.

Cyantraniliprole is an anthranilic diamide insecticide used for the effective management of diamondback moth in cabbage. Dietary risk assessment of pesticides in food is a major concern now. This study developed a QuEChERS/HPLC-PDA-based highly efficient and reliable method, registering 89.80-100.11% recoveries of cyantraniliprole and its metabolite IN-J9Z38 from cabbage and soil with a relative standard deviation of 0.43-5.77%. Field experiment was conducted to study the residue dissipation of cyantraniliprole in cabbage and soil. Two foliar treatments of 10.26% formulation (Benevia) at 60 (T1 ) and 120 (T2 ) gram active ingredient/hectare were applied. The dissipation half-lives of cyantraniliprole in cabbage and soil were determined to be 3.5-4.2 and 3.8-5.3 days at T1 and 3.9-4.8 and 4.1-4.7 days at T2 , respectively. The maximum concentrations of IN-J9Z38 at T1 and T2 were 0.819 and 1.061 mg/kg, respectively, on the fifth day. A risk quotient value of <1 indicates no dietary risk to the consumers. The residues in the harvested cabbage were below the tolerance level of 2.0 mg/kg established by the regulatory body in India.

The dissipation behavior, household processing factor and risk assessment for cyenopyrafen residues in strawberry and mandarin fruits.

A modified QuEChERS method for determining cyenopyrafen in strawberries, mandarins and their processed products was established with a good linearity (R2 > 0.9981), accuracy (recoveries of 83% to 111%) and precision (relative standard deviations of 0.9% to 14%). The limit of quantification (LOQ) was 0.01 mg/kg. Field results showed that the half-lives of cyenopyrafen were 6.8 and 11.8 d in strawberry and mandarin respectively, and that the final residues were within established maximum residue limits (MRLs). The household processing factors (PFs) for cyenopyrafen residues in strawberry and mandarin fruits were also studied: residues increased in strawberry jam (PF 1.51) and mandarin juice (1.31) but decreased in strawberries (0.58) and mandarin pulp (<0.17) after washing and peeling, respectively. A risk assessment showed that the risk from long-term dietary exposures to cyenopyrafen was 73.73%, indicating that consuming these products was unlikely to present a public health concern.

Tuning a pyrazoline-based fluorogenic reagent, 3-naphthyl-1-(4-trifluoromethyl)-5-(4-carboxy phenyl)-2-pyrazoline for sensitive precolumn derivatization of aliphatic alcohols and trace analysis by RP-HPLC with fluorescence detection.

A new member of the pyrazoline family, 3-naphthyl-1-(4-trifluoromethyl)-5-(4-carboxy phenyl)-2-pyrazoline has been evaluated as a precolumn derivatization reagent for the analysis of primary alcohols using HPLC. The simultaneous separation of eight alcohol derivatives (C1 -C8 ) within 15 min was achieved on a reverse-phase C8 column with an isocratic elution mode. The derivatives were detected with fluorescence at an emission wavelength of 470 nm when excited at 360 nm. The identification of the corresponding derivatives was carried out by LC-MS/MS and all showed their characteristic parent peak in negative ion mode. The proposed method was validated using normal analytical tools and was found to be excellent. As a preliminary application, our method was used to determine ethanol concentration in alcohol-containing chocolates and cough syrup.

Determination of azoxystrobin, topramezone, acetamiprid, fluometuron and folpet in their commercially available pesticide formulations by liquid chromatography.

A rapid, simple, precise and accurate high performance liquid chromatographic (HPLC) analytical method was developed and validated for the determination of the active substances (a.s.) azoxystrobin, topramezone, acetamiprid, fluometuron and folpet in their respective commercially available formulations. The method was used for the analysis of samples under the frame of the national quality control program of plant protection products in the Greek market. Chromatographic separation of the active substances from additives and co-formulants is achieved using isocratic elution with acetonitrile and 0.1% phosphoric acid solution (60:40 v/v) at a flow rate of 0.4 mL min-1 on a C18 monolithic column (Chromolith Performance-RP18e 100 × 4.6 mm) and UV detection at 230 nm. Validation parameters of the method fulfilled acceptability criteria. Recovery of all individual compounds was in the range 97.8-100.9%. Precision expressed as relative standard deviation was lower than the theoretical values of the modified Horwitz equation. Correlation coefficients of linearity of response were better than 0.999. The benefits of the proposed method are significant reduction in analysis time and total cost since all analytes were determined with the same extraction procedures and chromatographic system. Analysis of real samples for all active ingredients confirmed fitness for purpose of the suggested method.

Lateral flow immunoassay for the simultaneous detection of fipronil and its metabolites in food samples.

We developed a sensitive and rapid lateral flow immunochromatographic (LFI) assay for the simultaneous detection of fipronil and its metabolites in eggs and cucumbers using gold nanoparticle (GNP)-labeled monoclonal antibodies (mAbs). Anti-fipronil mAbs (1B6) were produced using two haptens and identified by heterologous indirect competitive enzyme-linked immunosorbent assay (icELISA) with half maximal inhibitory concentration (IC50) and limit of detection (LOD) values of 0.46 ± 0.07 and 0.05 ± 0.01 ng mL-1, respectively. The developed LFI strip showed high sensitivity and specificity in the detection of fipronil with cut-off and visual limit of detection (vLOD) values of 10 and 0.25 ng mL-1, respectively. Furthermore, the application of LFI in the detection of fipronil-spiked egg and cucumber samples was validated by liquid chromatography tandem mass spectrometry (LC-MS/MS). Our developed LFI assay is suitable for detection of fipronil and its metabolites in real samples.