Endodontic Ni-Ti Rotary Instruments for Glide-path, Are They Still Necessary and How to Think about the Ideal Instrument?

How to cite this article: Reda R, Maccari E, Bhandi S. Endodontic Ni-Ti Rotary Instruments for Glide-path, Are They Still Necessary and How to Think about the Ideal Instrument? J Contemp Dent Pract 2024;25(6):505-506. Keywords: Alloy, Endodontics, Glide Path, NiTi Rotary Instruments, Patency.

Static Loading of Different Intraradicular Preparation Depths of Trinia Endocrowns in Maxillary Canines.

AIM: The aim of this study is to compare the fracture resistance of canine teeth restored using TRINIA Endocrowns with three different types of preparations (2, 3, and 4 intracanal preparations). MATERIALS AND METHODS: Thirty maxillary-extracted canines were collected. All teeth were fixed in orthodontic acrylic resin and decapitated at the level of the proximal cemento-enamel junction (CEJ). After being endodontically treated, specimens were distributed equally between 3 groups (n = 10) with different preparation depths (GT: 2 mm Intraradicular Preparation, GH: 3 mm Intraradicular Preparation, GF: 4 mm Intraradicular Preparation). Thirty TRINIA endocrowns were dry milled. After surface treatment, all endocrowns were bonded to their corresponding roots using Permaflo a dual-cure resin cement. Each specimen was then fixed in the lower part of a universal testing machine with a load cell of 5 KN, at an angle of 45 degrees to the tooth long-axis at 0.5 mm/min crosshead speed. Failure loads were recorded in Newton's. Data were recorded, organized, and statistically investigated. RESULTS: Shapiro-Wilk tests revealed that the data were not normally distributed. Descriptive statistics revealed a high mean fracture resistance of GH (647 N), then GT (475.6 N), and finally GF (353.9 N). The Kruskal-Wallis test revealed a significant difference that existed between the groups being studied (p = 0.036). CONCLUSION: TRINIA endocrowns with intracanal preparations of 2 and 3 mm provide more promising fracture resistance than those with intracanal preparations of 4 mm as a way of treating of root-canal-treated maxillary canines. TRINIA endocrowns (2 and 3 mm intracanal preparations) are as promising as fiber posts and all ceramic crowns in terms of fracture resistance. TRINIA endocrowns with 2 mm intracanal preparations are mostly reparable after failure, but those of 3 and 4 mm are mostly irreparable after failure. CLINICAL SIGNIFICANCE: Modifying endocrowns to have intraradicular projections, simulating Nayyar core, may improve the success and longevity of endocrowns in anterior teeth. How to cite this article: Alahmad AM, Alenezi AY, Rayyan M, et al. Static Loading of Different Intraradicular Preparation Depths of Trinia Endocrowns in Maxillary Canines. J Contemp Dent Pract 2024;25(6):575-580.

Erratum: Postendodontic Pain Using Single File System with Different Irrigation Protocols in Single-visit Root Canal Treatment: A Randomized Control Trial.

How to cite this article: Kathiria NV, Attur K, Bagda KM, et al. Erratum: Postendodontic Pain Using Single File System with Different Irrigation Protocols in Single-visit Root Canal Treatment: A Randomized Control Trial. J Contemp Dent Pract 2024;25(5):503.

Evaluation of shaping ability, apical transportation and centering ratio of T-Endo Must, WaveOne Gold, and Trunatomy in resin blocks.

Purpose: This study aimed to compare the shaping abilities of different nickel-titanium file systems. Materials and Methods: Sixty-six j-shaped resin blocks were randomly divided into three groups (n = 22): Group T-Endo MUST (TE), Group WaveOne (W), Group TruNatomy (TR). After canal preparation, the amount of material removed from the canal, the centering ratio of the file systems, the direction and amount of canal transportation, and shaping errors were evaluated. Shaping time was calculated. Data of shaping time were analyzed with ANOVA and Tamhane test. Data on the shaping ability were analyzed with two- and three-way ROBUST ANOVA. The significance level was set at p = 0.05. Results: There was a statistically significant difference between all groups for shaping time (p < 0.001). There was a statistically significant difference between groups for the total amount of material removed (p < 0.001). The directions of canal transportation were the inner surface of the curvature for W and TR and the outer for TE. There was no statistically significant difference between the groups for the amount of transportation (p > 0.05). The centering ratio of TE and W was statistically higher than TruNatomy (p < 0.001). Conclusions: TruNatomy removed the least material that supported the minimally invasive endodontic approach. All file systems caused similar transportation and did not change the original canal shape.

Evaluation of apically extruded debris during root canal filling material removal in teeth with external apical root resorption: a comparison of different obturation techniques.

BACKGROUND: Root canal retreatment is necessary when initial treatment fails. Nickel-titanium systems help remove filling materials; however, some methods can cause canal content extrusion, resulting in inflammation and delayed healing. This study aimed to examine the impact of different preparation techniques and endodontic file systems on apical debris volume to limit material dispersion to periradicular tissues. METHODS: Ninety extracted maxillary incisors were evaluated. Simulated apical root resorption was created by removing the apical 2 mm of the root. The teeth were divided into two groups: one filled with a single cone and the other with cold lateral compaction (CLC). Each group was further divided into three subgroups (n = 15 each): Subgroup 1 used Reciproc R25 for removal and R50 for final preparation; Subgroup 2 used ProTaper Universal Retreatment (PTUR) files D1, D2, and D3 for removal and ProTaper Next X5 for finalization; and Subgroup 3 used VDW.Rotate Retreatment (VDW.RotateR) for removal and VDW.Rotate 50.04 for completion. Debris from retreatment was collected in pre-weighed tubes to determine the amount. The apical extrusion data underwent a two-way analysis of variance. RESULTS: The Reciproc group had a mean extruded debris weight of 0.54 ± 0.24 mg, higher than the PTUR (0.28 ± 0.15 mg) and VDW.RotateR (0.39 ± 0.29 mg) groups (p < 0.05). The single-cone technique (SCT) resulted in a mean debris weight of 0.34 ± 0.23 mg, lower than the CLC technique, which had a mean of 0.46 ± 0.27 mg (p < 0.05). SCT had a shorter retreatment duration (111.12 ± 33.46 s) compared to CLC (176.26 ± 52.26 s) (p < 0.05). CONCLUSION: The Reciproc file system and the CLC obturation technique resulted in greater apical debris extrusion than the other methods. SCT was quicker than CLC. The Reciproc groups are more susceptible to apex extrusion during retreatment.

Optical microscopy evaluation of root canal filling removal by beginner operators in posterior teeth.

This study analyzed the effectiveness of root canal filling removal in lower molars performed by beginner operators using optical microscopy. A total of 55 mandibular first and second molars with mesial roots exhibiting an average curvature of 10-20° were selected based on preoperative radiographs. Instrumentation was done with ProTaper Gold (Dentsply Sirona) up to F2 (25/.08), using 2ml of 2.5% NaOCl irrigation solution after each file. Root canal obturation was performed using gutta-percha points with cold lateral condensation and Sealapex (Kerr Dental). Coronal fillings were made with composite resin and stored in distilled water for two years. Removal of the root canal fillings was performed with AF Retreatment Rotary (AFRR) and AF Blue R3 (AFBR3) (Fanta Dental Materials) under reciprocating motion with 2.5% NaOCl irrigation. Cross-sections of the coronal, middle, and apical thirds were analyzed at 40x magnification using a STEINDORFF POL microscope with a digital camera. Image analysis was conducted using Image J software, version 1.54, to determine the efficiency of root canal filling removal by percentage. Statistical analysis via one-way ANOVA revealed significant differences between distal and mesial roots (P < 0.05). Specifically, for mesial roots, the removal efficiency was 70.65% in the coronal third, 54.66% in the middle third, and 21.32% in the apical third. Significant difficulties were noted due to fractured files, calcifications, and debris accumulation in the isthmuses. The study concluded that the protocol using Fanta files demonstrated significant differences in removal efficiency correlated with root curvature, compounded by the inexperience of beginner operators. The findings highlight the challenges faced by novice practitioners in achieving effective root canal filling removal.

CBCT assessment of mandibular molar furcation following root canal retreatment using engine-driven instruments.

This study employed e-Vol DXS cone beam computed tomography (CBCT) software to assess dentin remnants in the furcation area of mesial canals in mandibular molars during root canal retreatment (RCR). Four groups (Reciproc®, ProTaper Next®, Race Evo®, Protaper Gold®) were subjected to RCR, and CBCT images were captured before (T1) and after (T2) treatment. Measurements of remaining dentin thickness at 1 mm and 3 mm below the furcation were scrutinized. Results revealed no significant differences in mean thicknesses of mesiobuccal (MB) and mesiolingual (ML) canals at 1 mm and 3 mm from the furcation pre-treatment (T1). Post-treatment (T2) showed analogous findings, with no significant differences in mean thicknesses. However, disparities were found between MB and ML canals at both distances, both before and after retreatment. In essence, the evaluated instruments exhibited safety in RCR, implying that they are appropriate for use in critical areas of mandibular molars without inducing excessive wear. This study underscores the reliability of these instruments in navigating danger zones during RCR, and contributes valuable insights for dental practitioners who handle complex root canal scenarios in mandibular molars.

Effect of glide path preparation on the apical debris extrusion for three single-file systems.

BACKGROUND: The dentinal debris produced during root canal preparation can be extruded through the apical foramen, which may cause undesired consequences, such as the postoperative inflammation of periapical tissues. OBJECTIVES: The aim of the present in vitro study was to evaluate the effect of glide path preparation on apical debris extrusion for the Reciproc®, WaveOne Gold® and One Curve file systems. MATERIAL AND METHODS: A total of 72 mandibular incisors were divided into 6 groups according to the nickel-titanium (NiTi) system used and glide path preparation: group Rp - Reciproc; group Rp-O - Reciproc after glide path preparation; group WG - WaveOne Gold; group WG-O - WaveOne Gold after glide path preparation; group OC - One Curve; and group OC-O - One Curve after glide path preparation. The preand post-instrumentation weight of Eppendorf tubes was measured. The pre-weight was subtracted from the post-weight to calculate the amount of apically extruded debris. The data was analyzed using the one-way analysis of variance (ANOVA) with the statistical program PASW Statistics for Windows, v.18.0. RESULTS: No statistically significant differences were found between the single-NiTi file systems with different kinematics in terms of apical debris extrusion, with or without glide path preparation (p > 0.05). CONCLUSIONS: The amount of apically extruded debris was not affected by the kinematics of different single-NiTi file systems. Moreover, creating a glide path had no effect on the apically extruded debris in straight root canals.

Cyclic fatigue resistance of two pediatric rotary files manufactured with different heat treatments: an in-vitro study.

Nickel-titanium (NiTi) instruments offer many advantages during endodontic instrumentation; however, the fracture risk within the canal remains a concern. Manufacturers continuously develop and introduce instruments to the market with supposedly enhanced cyclic fatigue resistance and increased flexibility, achieved through different proprietary manufacturing processes, the details of which have not been made public. In recent years, two rotary systems specially designed for deciduous teeth have been commercially available, but information about their performance is lacking. This investigation aimed to identify which manufacturing process provides better cyclic fatigue resistance: the AF-H Wire technology used in the AF baby rotary files (AF-f) or the CM-Wire technology used in the i3 Gold deciduous teeth rotary files (i3G-f). Forty rotary International Organization for Standardization (ISO) 25/04 files were tested in artificial canals with a standard geometry of 60° angle and 2.5 mm radius until fracture. The number of cycles to fracture was calculated, and the length of the fragments was measured. A scanning electron microscope (SEM) was used to examine the fracture surfaces and fragments. Energy dispersive spectroscopy (EDS) was used to determine the percentage weight of NiTi in each file. The statistical analysis (Mann-Whitney test) showed that the cyclic fatigue resistance of the AF-f was significantly higher (p < 0.0001) than that of the i3G-f. Additionally, there was a significant difference (p = 0.0419) in the length of the fractured fragments. All instruments showed one or more types of manufacturing defects and presented similar NiTi percentages by weight. The manufacturing process is critical to cyclic fatigue resistance, and there seems to be responsible for the difference in cyclic fatigue resistance between these similar instruments.

Apically extruded debris evaluation with the use of ProTaper Ultimate and TruNatomy files systems with and without glider preparation in primary tooth.

Information regarding the influence of resorption and glide paths on debris extrusion in primary teeth is lacking. Therefore, we evaluated debris extrusion with and without resorption and with and without the use of a path file in primary molar teeth prepared with ProTaper Ultimate (PTU) Prime and TruNatomy (TRN) Prime rotary file systems. Forty resorbed and forty non-resorbed primary molar teeth were collected. Both groups were divided into four subgroups (n = 10). The Eppendorf tubes were weighed pre-debris. The distal canals of the teeth were prepared with PTU Prime and TRN Prime file systems, with and without the use of path files. The debris-filled tubes were weighed, and the weight of only the extruded debris was calculated by subtraction. The data were analyzed using a three-way analysis of variance (ANOVA) test. The presence of tooth resorption significantly increased debris extrusion, and the use of a path file significantly decreased debris extrusion (p < 0.001). The binary and ternary interactions of the three evaluated parameters among the groups showed no significant differences in terms of the amount of debris extruded (p > 0.05). While debris extrusion was observed in all groups, the use of a glide path file in primary teeth before the preparation process resulted in less debris extrusion.

Comparative evaluation of clinical efficacy and volumetric changes in pulpectomized primary molars using hand K-file, ProTaper rotary file, and Kedo-SG blue file: an in-vitro cone beam computed tomography analysis.

The accomplishment of a successful pulpectomy depends on multiple factors that involve targeted removal of the causative irritants and soft and hard tissue debris by mechanical and chemical means. Compare and evaluate the efficacy of canal preparation and volumetric filling using conventional files and two rotary file systems using cone beam computed tomography (CBCT). Thirty freshly extracted human primary second molars were randomly divided into three groups of 10 teeth each. After access opening and working length determination, pre-operative volume analysis was done using CBCT. The canals were then instrumented by either hand K-files, ProTaper rotary files or Kedo-SG Blue rotary files. Post-operative volume analysis was performed using CBCT. All the canals were obturated using Metapex and scanned again using CBCT. Mean values of the pre- and post-operative canal volumes were analyzed using one-way Analysis of Variance (ANOVA). Inter- and intra-group volumetric changes were analyzed statistically using a post hoc test. The mean difference in volume after canal preparation and obturation was the highest in the Kedo-SG Blue group, followed by the ProTaper group and the least in the hand K group (p = 0.001). Inter-group comparison showed statistically significant differences between the hand K group and ProTaper group (p = 0.001), the ProTaper group and Kedo-SG Blue group (p = 0.001), and the hand-K group and Kedo-SG Blue group (p = 0.02). The volume of preparation and obturation was the highest using Kedo-SG Blue, followed by the ProTaper file systems.

Impact of final rinse with saline or alcohol solution on root canal sealability.

Endodontic irrigation protocols are not only used to clean and disinfect the root canal system, but also to condition the canal wall dentine for subsequent root filling. In this study we tested whether a final irrigation step with saline solution or 80% ethanol improved root canal sealabilty by two popular sealers, an epoxy resin (AH Plus) and a hydraulic calcium silicate cement-based product (BioRoot RCS). Root canals in extracted single-rooted human teeth were instrumented and filled with a matched gutta-percha cone and sealer. During instrumentation and prior to root filling, sealer-specific irrigation protocols were applied. These involved a combined sodium hypochlorite/1-hydroxyethylidene-1,1-diphosphonic acid application, which was followed by irrigation with ethylenediaminetetraacetic acid (EDTA) for AH Plus. Protocols were followed by a 5-ml ultimate rinse with saline solution or 80% ethanol. No such final rinse was the control (N = 9). Canals were then dried with matched paper points. One week after root filling and storage of the teeth at 37°C in a humid environment, Rhodamine B was used to trace leakage. Two-way ANOVA revealed that the type of sealer had a significant (P < 0.05) impact on apical dye penetration while the final rinse did not (P > 0.05). AH Plus provided the slightly better seal (P < 0.05). Leakage occurred between the sealer and the dentin with AH Plus, and between the sealer-to-dentin as well as the sealer-to-gutta-percha interface with BioRoot RCS. In summary and under current conditions, there was no benefit from applying saline or ethanol as an ultimate rinsing solution prior to drying the canal with matched paper points.

Effectiveness of EndoActivator, PATS Vario system, and XP-endo Finisher files on smear layer removal under scanning electron microscope: A comparative study.

CONTEXT: The smear layer may harbor many bacteria; hence, alternative methods are used to disrupt and remove biofilm. AIM: The aim of the study was to compare the effectiveness of EndoActivator, PATS Vario System, and XP-endo Finisher files on smear layer removal using a scanning electron microscope. SUBJECTS AND METHODS: Sixty single-rooted extracted premolars with Vertucci Type 1 configuration were decoronated and divided into four groups. The groups were instrumented with the rotary ProTaper file system. All specimens were flushed with 1 ml of 3% sodium hypochlorite. Group 1 was irrigated with a conventional needle and syringe. In Group 2, the irrigant was activated with an EndoActivator. In Group 3, the irrigant was activated with PATS Vario system, and in Group 4, XP-endo Finisher files were used after biomechanical preparation to remove debris and smear layer. All specimens were finally rinsed with 3 ml of 3% sodium hypochlorite. The teeth underwent longitudinal splitting and grooving in the coronal, middle, and apical thirds, and then, the samples were taken for scanning electron microscopy to evaluate the amount of smear layer removal in each third. RESULTS: The middle and coronal thirds Showed that almost similar efficacy to remove smear layer in both Group II and Group III. At the apical third, Group III showed comparatively better results than Group I, II, and IV, respectively. CONCLUSION: Equal amount of smear layer was seen with EndoActivator and PATS Vario system when used as sonic irrigation devices.

Negotiating and Treating Lateral Canals: Report of 7 Cases.

This is a series of 7 cases in which the operator penetrated lateral canals with instruments. Two teeth presented with irreversible pulpitis, 4 with necrotic pulps, and 1 with previous treatment. Except for the teeth with pulpitis, all the others were associated with apical periodontitis. The main root canal was always relatively straight, with the lateral canals at the middle third of the root. Suggestive images of lateral canal presence were seen on periapical radiographs in five cases. The clinician introduced intentionally small hand instruments in the lateral canal in 5 cases, while the penetration was fortuitous in the others. The lateral canals were obturated in all cases. Follow-up examination was possible in five cases, all of them showed evidence of successful clinical and radiographic outcomes. Introducing files into lateral canals may permit some preparation and penetration of irrigant solution, favoring disinfection and, consequently, enhancing the treatment outcome. (EEJ-2023-05-063).

Quality of Root Canal Fillings and Procedural Errors for In Vivo Studies Prepared in Different Clinical Settings and with Rotary Systems: A Systematic Review.

BACKGROUND This systematic review of the literature aimed to identify published studies and evaluate them on the quality of root canal fillings (RCF) and procedural errors with rotary systems for in vivo studies prepared for different clinical settings. MATERIAL AND METHODS A full literature exploration was conducted in Clarivate Analytics' Web of Science, Elsevier's Scopus, Embase, and PubMed for studies published between January 2020 and March 2024. A manual search was also performed by reviewing the references of selected papers. The following keywords were used: quality of root canal filling(s) OR quality of root canal obturation, root canal obturation OR endodontic treatment, clinical setting (academic, private, governmental), AND/OR procedural errors and rotary instrumentation. RESULTS Sixteen clinical studies were included in this review. The acceptance percentages for obturation length, density, and taper were 76.3%, 74.7%, and 82.5%, respectively, indicating significantly high, good ratios. The overall RCF recorded showed that 68.2% of root canal obturations were considered acceptable. Acceptable rates remained higher than unacceptable rates in academic, hospital, and private settings, and percentages ranged from 65.2% to 93.0%. Only 5 studies reported procedural errors, namely, ledge formation, separated instruments, apical perforation, transportation, lateral perforation, and root/foramen perforation. CONCLUSIONS Using rotary instruments for different root canal treatment steps as instrumentation and obturations is highly recommended. Among different clinical setting and practice, these instruments resulted in a good and acceptable RCF, overall quality performed by those instruments, and few procedural errors.

Evaluation of the efficacy of different irrigation activation techniques in removing of calcium hydroxide on teeth with the simulated internal root resorption cavity: a confocal laser scanning microscope analysis.

The aim of this study is to evaluate the effect of different irrigation activation methods on root canal sealer penetration in teeth with simulated internal root resorption (IRR) and calcium hydroxide (CH) applied using a confocal laser scanning microscope (CLSM). 60 incisors with a single root and a single canal were included in the study. IRR cavities were created in the middle third of the root canal, and CH was placed. The samples were randomly divided into 4 groups (n = 15) according to the irrigation activation method to be tested: standard needle irrigation (SNI), sonic activation (EDDY), photon-induced photoacoustic flow (PIPS), and shock wave enhanced emission photoacoustic flow (SWEEPS). After irrigation activation applications, the root canals were obturated. Sections of 1.0 ± 0.1 mm were taken from the apical, middle, and coronal regions of each sample. The penetration area (µm2) and maximum penetration depth (µm) of the root canal sealer were examined by CLSM and analyzed using ImageJ software. Statistical analysis was performed with a one-way ANOVA and post-hoc Tukey test at the P < 0.05 significance level. Among all irrigation activation methods tested, both the penetration area and maximum penetration depth of the root canal sealer were greater in the coronal region than in the apical region (p < 0.05). In the IRR region, there was no difference in terms of maximum penetration depth between PIPS and SWEEPS (p > 0.05), it was highest in SWEEPS (p < 0.05). PIPS and SWEEPS were better than other irrigation activation methods in the penetration of root canal sealer in the resorption areas of teeth with IRR.

Comparative Evaluation of the Efficacy of ProTaper & Mtwo Rotary Retreatment System and Conventional Hand H-files for Removal of Gutta-percha from Root Canal - A Stereomicroscopic Study.

BACKGROUND: Root canal retreatment aims to eliminate or substantially reduce the microbial load from the root canal and removal of previous root filling materials is the primary goal of nonsurgical retreatment. AIM: To comparatively evaluate the effectiveness of ProTaper retreatment files, Mtwo retreatment files, and Hedstrom files along with Gates Glidden (GG) Drill by using a stereomicroscope for the detection of remaining gutta-percha after root canal retreatment using a stereomicroscope. MATERIALS AND METHODS: Forty-five test samples were divided into three experimental groups (15 samples each), such as Group A-ProTaper retreatment files; Group B-Mtwo retreatment files; Group C-Hedstrom files along with Gates Glidden Drill. After routine endodontic treatment in the test samples, gutta-percha was removed from the test samples as per the division of different retreatment file systems. Further, test samples were divided longitudinally and were evaluated under the stereomicroscope. Stereomicroscopic images were captured and analysed under Image Analyser Software-Image J. STATISTICAL ANALYSIS: One-way ANOVA test was used for comparison of gutta-percha removal between the groups and Tukey's post hoc test was used for pairwise comparisons. RESULTS: The least remaining filling material was seen in specimens retreated with the ProTaper universal system. The highest remaining filling material was seen in specimens retreated with Hedstrom file with Gates Glidden Drill. CONCLUSION: All experimental test techniques left gutta-percha remnants within the root canal. ProTaper universal rotary retreatment system proved to be an efficient method of removing gutta-percha and left relatively less volume in comparison with other test systems.

Comparison of four different file systems in terms of transportation in S-shaped canals and apically extruded debris.

PURPOSE: This study evaluated transportation and extruded debris during preparation using different instruments. METHODS: Sixty resin blocks with S-shaped canals and 60 extracted teeth were separated into four groups (n = 15), which were instrumented with Reciproc Blue, XP-endo Shaper, WaveOne Gold, and Twisted File Adaptive. For evaluating transportation, pre- and post-preparation images were obtained under a stereomicroscope and superimposed with digital software. The distance between the inner and outer canal walls was measured. For the evaluation of debris extrusion, the samples were placed in Eppendorf tubes and instrumented using one of the four rotary files. The initial weight was subtracted from the post-instrumentation weight to determine the amount of extruded debris. The Kruskal-Wallis and Dunn multiple tests were performed. RESULTS: For transportation, no significant difference was found between the XP-endo Shaper-Twisted File Adaptive systems and between Reciproc Blue-WaveOne Gold groups (P > 0.05). The XP-endo Shaper and Twisted File Adaptive techniques led to significantly less transportation compared to the other systems (P < 0.05). Regarding debris extrusion, the XP-endo Shaper system extruded significantly less debris than the other groups (P < 0.05). CONCLUSION: XP-endo Shaper extruded less debris compared to other groups, while XP-endo Shaper and Twisted File Adaptive caused less transportation than other files.

[Study on fatigue resistance of mechanical nickel-titanium files by phase-locked infrared flaw detection method].

PURPOSE: The fatigue resistance of mechanical nickel-titanium files was tested by phase-locked infrared flaw detection method, in order to timely detect instrument wear, providing reference for clinical safe use and timely abandonment of nickel-titanium files. METHODS: Twenty sets of mechanical nickel-titanium files were selected from Reciproc-Blue(RB), MTWO and S3 respectively, and resin simulated root canals with 60° and 90° bending were prepared, which were divided into 6 subgroups. The fatigue value after use, the number of uses before breaking and the length of fracture of file 25# of each group of files were recorded and compared with SPSS 26.0 software package. RESULTS: With the increase of the times of use, the fatigue value of the three kinds of files increased gradually. Among the two types of curved root canals, the number of uses before fracture in RB group was significantly increased compared with that in MTWO group and S3 group (P＜0.05). The number of uses of the three kinds of files in the 90° curved root canal were significantly less than in the corresponding groups in the 60° curved root canal(P＜0.05). There was no significant difference in the length of fracture among the three kinds of files(P＞0.05). CONCLUSIONS: Phase-locked infrared flaw detection method can be used for non-destructive testing and quantitative analysis of the fatigue degree of nickel-titanium files.

Comparative evaluation of the accuracy of electronic apex locators and cone-beam computed tomography in detection of root canal perforation and working length during endodontic retreatment.

BACKGROUND: To evaluate the accuracy of the electronic apex locators (EALs), and Cone-Beam Computed Tomography (CBCT) scanning, both in working length (WL) determination and in the detection of root canal perforations in retreatment cases. METHODS: Sixty human mandibular premolars were selected. After crown removal partially and canal access, root canals were instrumented and irrigated. The obturation process utilized gutta-percha and sealer with warm vertical compaction. Two groups were distinguished: one without perforation (Group 1) and the other with an apical third perforation (Group 2). Retreatment included filling removal, apical preparation, and irrigation. Actual working lengths (AWL) were determined using a stereomicroscope. CBCT images were used to measure CBCT working length (CWL), with adjustments for optimal views. Propex II and Dentaport ZX were used to measure electronic working length (EWL). Differences between EWL and AWL, as well as CWL, were analyzed to gauge accuracy. Data underwent Two-way ANOVA analysis. Measurements within ± 0.5 and ± 1 mm tolerance ranges were deemed successful for each device, followed by applying the Pearson Chi-square test. RESULTS: The study reveals no significant inter-group variations in device performance (p > .05). Dentaport ZX missed detecting perforation in two Group 2 (apical perforation) cases. For ± 1 mm tolerance, Propex II displayed the highest success in Group 2 (apical perforation). CONCLUSION: This study demonstrates the comparable performance of Propex II, Dentaport ZX, and CBCT in endodontic retreatment, providing insights into diagnostic reliability.