Relationship between ankle dorsiflexion range of motion and sprinting and jumping ability in young athletes.

OBJECTIVES: To investigate the relationship between predicted risk of injury based on the dichotomous classification of the weight-bearing lunge (WBL) test scores and variables related to jumping and sprinting ability in young athletes. Furthermore, to compare the impact of the classical dichotomous classification versus a more specific quartile subdivision of the WBL test scores on the explored variables. DESIGN: Cross-sectional study. PARTICIPANTS: 125 healthy athletes (mean age 10.38 (SD = 2.28) years) were recruited. MAIN OUTCOME MEASURES: Ankle dorsiflexion was evaluated with the WBL test, jumping distance with the standing long jump (SLJ) test, and maximal running speed with the 14-m and 28-m sprint test. RESULTS: Athletes with WBL test scores lower than 10 cm exhibited significantly poorer results for the SLJ test as well as lower 14-m and 28-m sprint times than those with WBL test scores higher than 10 cm (p < 0.05). Likewise, when WBL test scores were subdivided by quartiles, a positive trend between range of motion and improved performance was shown. CONCLUSIONS: Reduced ankle dorsiflexion mobility may affect sprinting and jumping ability in young athletes. In addition, a more detailed classification of ankle restriction by quartiles is proposed in this study in order to prevent injury and enhance athletic performance.

Ground reaction force analysis in flexible and rigid flatfoot subjects.

BACKGROUND: Flatfoot is a structural and functional deformity of the foot that might change ground reaction force variables of gait. Evaluating the components of ground reaction force in three dimensions during gait is considered clinically important. This study aimed to investigate the components of ground reaction force, impulse, and loading rate during gait in people with flexible and rigid flatfoot compared to healthy subjects. 20 young women with flatfoot in two experimental groups (10 with rigid flatfoot and 10 with flexible flatfoot) and 10 healthy women in the control group participated in this study. Ground reaction force components during gait were measured using two force plates. The peak of ground reaction forces, impulse, and loading rate were then extracted. Data were processed and analyzed using MATLAB and SPSS software. One-way ANOVA with a significant level (P˂0.05) was used for statistical analysis. The results showed that peak braking force was higher in the rigid flatfoot group than in the control group (p = 0.016) and the flexible flatfoot group (p = 0.003). The posterior force loading rate was significantly higher in the rigid flatfoot group than in the flexible flatfoot group (P = 0.04). There was no significant difference in vertical loading rate between groups (P˃0.05). Since the maximal posterior ground reaction force was higher in the subjects with rigid flatfoot than in those with flexible flatfoot and healthy subjects, the increase in posterior ground reaction force is associated with an increase in anterior shear force at the knee.

Effect of different ulnar osteotomies on loading of the distal radioulnar joint: a finite element analysis.

BACKGROUND: Ulnar impingement syndrome is a prevalent source of ulnar carpal pain; however, there is ongoing debate regarding the specific location of shortening, the method of osteotomy, the extent of shortening, and the resulting biomechanical alterations. METHOD: To investigate the biomechanical changes in the distal radioulnar joint (DRUJ) resulting from different osteotomy methods, a cadaveric specimen was dissected, and the presence of a stable DRUJ structure was confirmed. Subsequently, three-dimensional data of the specimen were obtained using a CT scan, and finite element analysis was conducted after additional processing. RESULTS: The DRUJ stress did not change significantly at the metaphyseal osteotomy of 2-3 mm but increased significantly when the osteotomy length reached 5 mm. When the osteotomy was performed at the diaphysis, the DRUJ stress increased with the osteotomy length, and the increase was greater than that of metaphyseal osteotomy. Stress on the DRUJ significantly increases when the position is changed to pronation dorsi-extension. Similarly, the increase in stress in diaphyseal osteotomy was greater than that in metaphyseal osteotomy. When the model was subjected to a longitudinal load of 100 N, neither osteotomy showed a significant change in DRUJ stress at the neutral position. However, the 100 N load significantly increased stress on the DRUJ when the position was changed to pronation dorsi-extension, and the diaphyseal osteotomy significantly increased stress on the DRUJ. CONCLUSIONS: For patients with distal oblique bundle, metaphyseal osteotomy result in a lower increase in intra-articular pressure in the DRUJ compared to diaphyseal osteotomy. However, it is crucial to note that regardless of the specific type of osteotomy employed, it is advisable to avoid a shortening length exceeding 5 mm.

Curved carbon-plated shoe may further reduce forefoot loads compared to flat plate during running.

Using a curved carbon-fiber plate (CFP) in running shoes may offer notable performance benefit over flat plates, yet there is a lack of research exploring the influence of CFP geometry on internal foot loading during running. The objective of this study was to investigate the effects of CFP mechanical characteristics on forefoot biomechanics in terms of plantar pressure, bone stress distribution, and contact force transmission during a simulated impact peak moment in forefoot strike running. We employed a finite element model of the foot-shoe system, wherein various CFP configurations, including three stiffnesses (stiff, stiffer, and stiffest) and two shapes (flat plate (FCFP) and curved plate (CCFP)), were integrated into the shoe sole. Comparing the shoes with no CFP (NCFP) to those with CFP, we consistently observed a reduction in peak forefoot plantar pressure with increasing CFP stiffness. This decrease in pressure was even more notable in a CCFP demonstrating a further reduction in peak pressure ranging from 5.51 to 12.62%, compared to FCFP models. Both FCFP and CCFP designs had a negligible impact on reducing the maximum stress experienced by the 2nd and 3rd metatarsals. However, they greatly influenced the stress distribution in other metatarsal bones. These CFP designs seem to optimize the load transfer pathway, enabling a more uniform force transmission by mainly reducing contact force on the medial columns (the first three rays, measuring 0.333 times body weight for FCFP and 0.335 for CCFP in stiffest condition, compared to 0.373 in NCFP). We concluded that employing a curved CFP in running shoes could be more beneficial from an injury prevention perspective by inducing less peak pressure under the metatarsal heads while not worsening their stress state compared to flat plates.

Severity of rotator cuff disorders and additional load affect fluoroscopy-based shoulder kinematics during arm abduction.

BACKGROUND: Rotator cuff disorders, whether symptomatic or asymptomatic, may result in abnormal shoulder kinematics (scapular rotation and glenohumeral translation). This study aimed to investigate the effect of rotator cuff tears on in vivo shoulder kinematics during a 30° loaded abduction test using single-plane fluoroscopy. MATERIALS AND METHODS: In total, 25 younger controls, 25 older controls and 25 patients with unilateral symptomatic rotator cuff tears participated in this study. Both shoulders of each participant were analysed and grouped on the basis of magnetic resonance imaging into healthy, rotator cuff tendinopathy, asymptomatic and symptomatic rotator cuff tears. All participants performed a bilateral 30° arm abduction and adduction movement in the scapular plane with handheld weights (0, 2 and 4 kg) during fluoroscopy acquisition. The range of upward-downward scapular rotation and superior-inferior glenohumeral translation were measured and analysed during abduction and adduction using a linear mixed model (loads, shoulder types) with random effects (shoulder ID). RESULTS: Scapular rotation was greater in shoulders with rotator cuff tendinopathy and asymptomatic rotator cuff tears than in healthy shoulders. Additional load increased upward during abduction and downward during adduction scapular rotation (P < 0.001 in all groups but rotator cuff tendinopathy). In healthy shoulders, upward scapular rotation during 30° abduction increased from 2.3° with 0-kg load to 4.1° with 4-kg load and on shoulders with symptomatic rotator cuff tears from 3.6° with 0-kg load to 6.5° with 4-kg load. Glenohumeral translation was influenced by the handheld weights only in shoulders with rotator cuff tendinopathy (P ≤ 0.020). Overall, superior glenohumeral translation during 30° abduction was approximately 1.0 mm with all loads. CONCLUSIONS: The results of glenohumeral translation comparable to control but greater scapular rotations during 30° abduction in the scapular plane in rotator cuff tears indicate that the scapula compensates for rotator cuff deficiency by rotating. Further analysis of load-dependent joint stability is needed to better understand glenohumeral and scapula motion. LEVEL OF EVIDENCE: Level 2. TRIAL REGISTRATION: Ethical approval was obtained from the regional ethics committee (Ethics Committee Northwest Switzerland EKNZ 2021-00182), and the study was registered at clinicaltrials.gov on 29 March 2021 (trial registration number NCT04819724, https://clinicaltrials.gov/ct2/show/NCT04819724 ).

Recommendation of minimal distal tibial length for long axis coordinate system definitions.

Accurate anatomical coordinate systems for the foot and ankle are critical for interpreting their complex biomechanics. The tibial superior-inferior axis is crucial for analyzing joint kinematics, influencing bone motion analysis during gait using CT imaging and biplane fluoroscopy. However, the lack of consensus on how to define the tibial axis has led to variability in research, hindering generalizability. Even as advanced imaging techniques evolve, including biplane fluoroscopy and weightbearing CT, there exist limitations to imaging the entire foot together with the full length of the tibia. These limitations highlight the need to refine axis definitions. This study investigated various superior-inferior axes using multiple distal tibia lengths to determine the minimal field of view for representing the full tibia long-axis. Twenty human cadaver tibias were imaged and segmented to generate 3D bone models. Axes were calculated based on coordinate definitions that required user manual input, and a gold standard mean superior-inferior axis was calculated based on the population's principal component analysis axis. Four manually calculated superior-inferior tibial axes groups were established based on landmarks and geometric fittings. Statistical analysis revealed that geometrically fitting a cylinder 1.5 times the mediolateral tibial width, starting 5 cm above the tibial plafond, yielded the smallest angular deviation from the gold standard. From these findings, we recommend a minimum field of view that includes 1.5 times the mediolateral tibial width, starting 5 cm above the tibial plafond for tibial long-axis definitions. Implementing these findings will help improve foot and ankle research generalizability and impact clinical decisions.

Tibial and femoral articular cartilage exhibit opposite outcomes for T1ρ and T2* relaxation times in response to acute compressive loading in healthy knees.

Abnormal loading is thought to play a key role in the disease progression of cartilage, but our understanding of how cartilage compositional measurements respond to acute compressive loading in-vivo is limited. Ten healthy subjects were scanned at two timepoints (7 ± 3 days apart) with a 3 T magnetic resonance imaging (MRI) scanner. Scanning sessions included T1ρ and T2* acquisitions of each knee in two conditions: unloaded (traditional MRI setup) and loaded in compression at 40 % bodyweight as applied by an MRI-compatible loading device. T1ρ and T2* parameters were quantified for contacting cartilage (tibial and femoral) and non-contacting cartilage (posterior femoral condyle) regions. Significant effects of load were found in contacting regions for both T1ρ and T2*. The effect of load (loaded minus unloaded) in femoral contacting regions ranged from 4.1 to 6.9 ms for T1ρ, and 3.5 to 13.7 ms for T2*, whereas tibial contacting regions ranged from -5.6 to -1.7 ms for T1ρ, and -2.1 to 0.7 ms for T2*. Notably, the responses to load in the femoral and tibial cartilage revealed opposite effects. No significant differences were found in response to load between the two visits. This is the first study that analyzed the effects of acute loading on T1ρ and T2* measurements in human femoral and tibial cartilage separately. The results suggest the effect of acute compressive loading on T1ρ and T2* was: 1) opposite in the femoral and tibial cartilage; 2) larger in contacting regions than in non-contacting regions of the femoral cartilage; and 3) not different visit-to-visit.

The impact of early weight-bearing on results following anterior cruciate ligament reconstruction.

INTRODUCTION: Anterior cruciate ligament (ACL) ruptures are common injuries that typically affect young, physically active individuals and may require surgical reconstruction. Studies have shown that the long time success of ACL reconstruction depends on the surgical technique and the postoperative rehabilitation strategy. However, there is still no consensus on the content of rehabilitation programs. Hence, additional research is required to elucidate the significance of early weight-bearing in the rehabilitation process following ACL reconstruction. The aim of this article is to examine the impact of weight-bearing on the clinical results of ACL reconstruction. MATERIALS AND METHODS: We retrospectively reviewed patient records who had undergone arthroscopic reconstruction using a semitendinosus-gracilis tendon graft for anterior cruciate ligament rupture between January 2018 and December 2020. The study included the data of 110 patients. The patients were split into two groups: Group 1 underwent early weight-bearing, while Group 2 followed a non-weight-bearing regimen for three weeks. We assessed the patients using the anterior drawer test, Lachman test, range of motion, Lysholm knee scale, Cincinnati scale, Tegner scale, International Knee Documentation Committee (IKDC) form and clinical records. Analytical tests were conducted to compare the results. RESULTS: The complication rates did not show a significant difference between the groups. Group 1 had higher frequencies of positive anterior drawer and Lachman tests. The Lysholm and Cincinnati knee scores of patients in Group 1 were notably lower than those of patients in Group 2. Additionally, the Tegner activity scores and IKDC scores of patients in Group 1 were also meaningfully lower than those of patients in Group 2. In Group 1 patients, there was no notable relationship observed between body mass index (BMI) and the results of the anterior drawer test (ADT) or Lachman test. However, patients with a BMI of 25 or higher in Group 1 showed a decrease in postoperative IKDC scores. In Group 2 patients, no significant relationship was identified between BMI and either the ADT or the Lachman test outcome. CONCLUSION: Based on current literature and current rehabilitation guidelines following ACL reconstruction, the decision to initiate early weight-bearing is based on a limited number of studies with low levels of evidence. In our study, we found that patients who followed a non-weight-bearing regimen for 3 weeks after surgery had better mid-term results than those who were allowed to bear weight early. It appears that further prospective studies on this topic are needed to update rehabilitation guidelines in the next.

Impairments in peroneal muscle size and activation in individuals with patellofemoral pain in weight-bearing position.

BACKGROUND: Patellofemoral pain (PFP) is characterized by chronic pain in the anterior aspect of the knee during loading activities. Many studies investigating muscle morphology changes for individuals with PFP focus on the proximal joints, however, few studies have investigated muscles of the foot and ankle complex. This study aimed to explore the differences in peroneal muscle size and activation between individuals with PFP and healthy controls using ultrasound imaging in weight-bearing. METHODS: A case-control study in a university lab setting was conducted. Thirty individuals with PFP (age: 20.23 ± 3.30 years, mass: 74.70 ± 27.63 kgs, height: 161.32 ± 11.72 cm) and 30 healthy individuals (age: 20.33 ± 3.37 years, mass: 64.02 ± 11.00 kgs, height: 169.31 ± 9.30 cm) participated. Cross-sectional area (CSA) images of the peroneal muscles were taken in non-weight bearing and weight-bearing positions. The functional activation ratio from lying to single-leg standing (SLS) was calculated. RESULTS: There was a statistically significant (p = 0.041) group (PFP, healthy) by position (non-weight-bearing, weight-bearing) interaction for the peroneal muscle CSA with a Cohen's d effect size of 0.2 in non-weight-bearing position and 0.7 in weight-bearing position. The functional activation ratio for the healthy group was significantly more (p = 0.01) than the PFP group. CONCLUSION: Peroneal muscles were found to be smaller in size in those with PFP compared to the healthy subjects in the weight-bearing SLS position. This study found that those with PFP have lower activation of peroneal muscles in functional position.

Structural characteristics, biomechanics and clinical significance of calcar femorale: A review.

The calcar femorale, first identified by Merkel in 1874, plays a pivotal role in the weight-bearing capacity of the proximal femur, and its structural integrity is crucial for the efficient distribution of mechanical loads. Originating at the vertical ridge where the pubofemoral ligament anchors, this bony prominence extends laterally behind the neutral axis from the medial to lateral aspects. Its presence is not merely an anatomical curiosity but significantly influences the biomechanics of the hip joint by providing additional strength and support against compressive forces encountered during activities such as walking or jumping. Despite its clear description in orthopedic texts, misconceptions persist about its exact function and importance. This article delves into the nuanced anatomy and biomechanical properties of the calcar femorale, offering a detailed literature-based examination that demonstrates its relevance in clinical practice. The review highlights how the robustness of the calcar femorale contributes to the prevention of femoral neck fractures as well as the stabilization of hip prostheses. Furthermore, the indispensable role of the calcar femorale in surgical outcomes is discussed, especially in the context of fracture repair and joint replacement, thus illustrating its enduring significance in contemporary medical applications.

Effectiveness of a passive military exoskeleton in off-loading weight during static and dynamic load carriage: A randomised cross-over study.

BACKGROUND: Load carriage imposes high physical stresses on the human body, increasing the risk of injuries. This study assessed the effectiveness of a passive military exoskeleton in off-loading the weight placed on the body during heavy load carriage under static standing and dynamic walking conditions. METHODS: Eight full-time regular personnel of the Singapore Armed Forces enrolled in the study. Static loading tests included nine trials of 10-s quiet standing while carrying different loads (0-55 kg) with and without the exoskeleton. For dynamic loading, participants walked on a treadmill on flat, inclined, and declined surfaces while carrying two different loads (25 kg, 35 kg) with and without the exoskeleton. In-shoe normal ground reaction forces (GRF) were recorded during quiet standing and treadmill walking. Differences in total force with and without the exoskeleton during static loading were compared using Wilcoxon one-sample signed ranked tests against zero (no weight off-load) as a reference. Statistical parametric mapping test was used to compare the walking in-shoe GRF-time series with and without exoskeleton use for each load and surface condition. RESULTS: Exoskeleton use was effective in off-loading loads of 2.3-13.5 kg during static quiet standing but the response varied substantially across loads and among the participants. Statistical analysis revealed no meaningful differences in the walking in-shoe GRF with and without exoskeleton use. The results were largely consistent across flat, inclined, and declined surfaces, and both 25-kg and 35-kg loads. CONCLUSIONS: The passive military exoskeleton was effective in off-loading some load from the human body during static quiet standing but not dynamic walking on flat and sloped surfaces. The varied response across loads and participants calls for better design and fitting of the military exoskeleton to individual users.

Towards an accurate rolling resistance: Estimating intra-cycle load distribution between front and rear wheels during wheelchair propulsion from inertial sensors.

Accurate assessment of rolling resistance is important for wheelchair propulsion analyses. However, the commonly used drag and deceleration tests are reported to underestimate rolling resistance up to 6% due to the (neglected) influence of trunk motion. The first aim of this study was to investigate the accuracy of using trunk and wheelchair kinematics to predict the intra-cyclical load distribution, more particularly front wheel loading, during hand-rim wheelchair propulsion. Secondly, the study compared the accuracy of rolling resistance determined from the predicted load distribution with the accuracy of drag test-based rolling resistance. Twenty-five able-bodied participants performed hand-rim wheelchair propulsion on a large motor-driven treadmill. During the treadmill sessions, front wheel load was assessed with load pins to determine the load distribution between the front and rear wheels. Accordingly, a machine learning model was trained to predict front wheel load from kinematic data. Based on two inertial sensors (attached to the trunk and wheelchair) and the machine learning model, front wheel load was predicted with a mean absolute error (MAE) of 3.8% (or 1.8 kg). Rolling resistance determined from the predicted load distribution (MAE: 0.9%, mean error (ME): 0.1%) was more accurate than drag test-based rolling resistance (MAE: 2.5%, ME: -1.3%).

Step type is associated with loading and ankle motion in tap dance.

Tap dance generates forces and joint motions that can lead to injury; however, little is known about the magnitude of load across different tap steps. The purpose of this study was to calculate peak vertical forces, average vertical foot velocities, and maximum/minimum ankle angles produced by tap dancers with different levels of experience performing the toe cannon, heel cannon, flap, and cramp roll. This prospective cross-sectional study included 14 female tap dancers aged ≥18 years with varying tap experience. Participants were recorded by three cameras while performing a choreographed tap combination containing four steps of interest on a force platform. Adjusting for experience and dancer-level clustering, we identified the steps-cramp roll and toe cannon-that had the highest peak vertical ground reaction force, angles, and velocities compared to flap and heel cannon. There was no effect of experience. The results supported our hypothesis and provide new insights into step production. Over time, the larger forces associated with these steps could pose an increased risk of injury to bones and joints when compared to smaller forces, which may suggest the importance of adjusting routines to reduce or avoid injury.

Foot offloading associated with carbon fiber orthosis use: A pilot study.

BACKGROUND: Traumatic lower limb injuries can result in chronic pain. Orthotic interventions are a leading conservative approach to reduce pain, manage loading, and protect the foot. Robust carbon fiber custom dynamic orthoses (CDOs) designed for military service members have been shown to reduce foot loading. However, the effect of carbon fiber orthosis design, including designs widely used in the civilian sector, on foot loading is unknown. RESEARCH QUESTION: Determine if carbon fiber orthoses alter foot loading during gait. METHODS: Loadsol insoles were used to measure peak forces and force impulse acting on the forefoot, midfoot, hindfoot, and total foot. Nine healthy, able-bodied individuals participated. Force impulse was quantified as cumulative loading throughout stance phase. Participants walked without an orthosis and with three carbon fiber orthoses of differing designs: a Firm stiffness CDO, a Moderate stiffness CDO, and a medial and lateral strut orthosis (MLSO). RESULTS: There were significant main effects of orthosis condition on peak forefoot forces as well as forefoot and hindfoot force impulse. Peak forefoot forces were significantly lower in the Moderate and Firm CDOs compared to no orthosis and MLSO. Compared to walking without an orthosis, forefoot force impulse was significantly lower and hindfoot force impulse was significantly greater in all carbon fiber orthoses. Additionally, hindfoot force impulse in the Firm CDO was significantly higher than in the MLSO and Moderate CDO. SIGNIFICANCE: The three carbon fiber orthosis designs differed regarding foot loading, with more robust orthoses providing greater forefoot offloading. Orthosis-related changes in forefoot loading suggest that carbon fiber orthoses could reduce loading-associated pain during gait. However, increased hindfoot force impulse suggests caution should be used when considering carbon fiber orthoses for individuals at risk of skin breakdown with repetitive loading.

Use of a wearable electromyography armband to detect lift-lower tasks and classify hand loads.

We used an armband with embedded surface electromyography (sEMG) electrodes, together with machine-learning (ML) models, to automatically detect lifting-lowering activities and classify hand loads. Nine healthy participants (4 male and 5 female) completed simulated lifting-lowering tasks in various conditions and with two different hand loads (2.3 and 6.8 kg). We compared three sEMG signal feature sets (i.e., time, frequency, and a combination of both domains) and three ML classifiers (i.e., Random Forest, Support Vector Machine, and Logistic Regression). Both Random Forest and Support Vector Machine models, using either time-domain or time- and frequency-domain features, yielded the best performance in detecting lifts, with respective accuracies of 79.2% (start) and 86.7% (end). Similarly, both ML models yielded the highest accuracy (80.9%) in classifying the two hand loads, regardless of the sEMG features used, emphasizing the potential of sEMG armbands for assessing exposure and risks in occupational lifting tasks.

Comprehensive assessment of global spinal sagittal alignment and related normal spinal loads in a healthy population.

Abnormal postoperative global sagittal alignment (GSA) is associated with an increased risk of mechanical complications after spinal surgery. Typical assessment of sagittal alignment relies on a few selected measures, disregarding global complexity and variability of the sagittal curvature. The normative range of spinal loads associated with GSA has not yet been considered in clinical evaluation. The study objectives were to develop a new GSA assessment method that holistically describes the inherent relationships within GSA and to estimate the related spinal loads. Vertebral endplates were annotated on radiographs of 85 non-pathological subjects. A Principal Component Analysis (PCA) was performed to derive a Statistical Shape Model (SSM). Associations between identified GSA variability modes and conventional alignment measures were assessed. Simulations of respective Shape Modes (SMs) were performed using an established musculoskeletal AnyBody model to estimate normal variation in cervico-thoraco-lumbar loads. The first six principal components explained 97.96% of GSA variance. The SSM provides the normative range of GSA and a visual representation of the main variability modes. Normal variation relative to the population mean in identified alignment features was found to influence spinal loads, e.g. the lower bound of the second shape mode (SM2-2σ) corresponds to an increase in L4L5-compression by 378.64 N (67.86%). Six unique alignment features were sufficient to describe GSA almost entirely, demonstrating the value of the proposed method for an objective and comprehensive analysis of GSA. The influence of these features on spinal loads provides a normative biomechanical reference, eventually guiding surgical planning of deformity correction in the future.

Effects of various load magnitudes on ACL: an in vitro study using adolescent porcine stifle joints.

INTRODUCTION: The escalating incidence of anterior cruciate ligament (ACL) injuries, particularly among adolescents, is a pressing concern. The study of ACL biomechanics in this demographic presents challenges due to the scarcity of cadaveric specimens. This research endeavors to validate the adolescent porcine stifle joint as a fitting model for ACL studies. METHODS: We conducted experiments on 30 fresh porcine stifle knee joints. (Breed: Yorkshire, Weight: avg 90 lbs, Age Range: 2-4 months). They were stored at - 22 °C and a subsequent 24-h thaw at room temperature before being prepared for the experiment. These joints were randomly assigned to three groups. The first group served as a control and underwent only the load-to-failure test. The remaining two groups were subjected to 100 cycles, with forces of 300N and 520N, respectively. The load values of 300N and 520N correspond to three and five times the body weight (BW) of our juvenile porcine, respectively. RESULT: The 520N force demonstrated a higher strain than the 300N, indicating a direct correlation between ACL strain and augmented loads. A significant difference in load-to-failure (p = 0.014) was observed between non-cyclically loaded ACLs and those subjected to 100 cycles at 520N. Three of the ten samples in the 520N group failed before completing 100 cycles. The ruptured ACLs from these tests closely resembled adolescent ACL injuries in detachment patterns. ACL stiffness was also measured post-cyclical loading by applying force and pulling the ACL at a rate of 1 mm per sec. Moreover, ACL stiffness measurements decreased from 152.46 N/mm in the control group to 129.42 N/mm after 100 cycles at 300N and a more significant drop to 86.90 N/mm after 100 cycles at 520N. A one-way analysis of variance (ANOVA) and t-test were chosen for statistical analysis. CONCLUSIONS: The porcine stifle joint is an appropriate model for understanding ACL biomechanics in the skeletally immature demographic. The results emphasize the ligament's susceptibility to injury under high-impact loads pertinent to sports activities. The study advocates for further research into different loading scenarios and the protective role of muscle co-activation in ACL injury prevention.

Comparative finite element analysis of the first thoracic vertebra in artiodactyls.

Artiodactyls exhibit a striking diversity of the cervical vertebral column in terms of length and overall mobility. Using finite element analysis, this study explores the morphology at the cervico-thoracic boundary and its performance under loads in artiodactyls with different habitual neck postures and body sizes. The first thoracic vertebra of 36 species was loaded with (i) a compressive load on the vertebral body to model the weight of the head and neck exerted onto the trunk; and (ii) a tensile load at the spinous process to model the pull via the nuchal ligament. Additional focus was laid on the peculiar shape of the first thoracic vertebra in giraffes. We hypothesized that a habitually upright neck posture should be reflected in the greater ability to withstand compressive loads compared to tensile loads, whereas for species with a habitually suspended posture it should be the opposite. In comparison to species with a suspended posture, species with an upright posture exhibited lower stress (except Giraffidae). For compressive loads in larger species, stress surprisingly increased. Tensile loads in larger species resulted in decreased stress only in species with an intermediate or suspensory neck posture. High stress under tensile loads was mainly reflecting the relative length of the spinous process, while high stress under compressive loads was common in more "bell"-shaped vertebral bodies. The data supports a stability-mobility trade-off at the cervico-thoracic transition in giraffes. Performance under load at the cervico-thoracic boundary is indicative of habitual neck posture and is influenced by body size.

Experimental and Theoretical Predictions of Static Plantar Pressure of Socks with Different Stitch Lengths.

BACKGROUND: Socks are mainly used to give the foot more comfort while wearing shoes. Stitch density of the knitted fabric used in socks can significantly affect the sock properties because it is one of the most important fabric structural factors influencing the mechanical properties. Continuous plantar pressures can cause serious damage, particularly under the metatarsal heads, and it is deduced that using socks redistributes and reduces peak plantar pressures. If peak pressure under the metatarsal heads is predicted, then it will be possible to produce socks with the best mechanical properties to reduce the pressure in these critical areas. METHODS: Plain knitted socks with three different stitch lengths (high, medium, and low) were produced. Static plantar pressure measurements by the Gaitview system were accomplished on ten women and then compared with the barefoot situation. Also, the peak plantar pressure of three types of socks under the metatarsal heads are theoretically predicted using the Hertz contact theory. RESULTS: Experimental results indicate that all socks redistribute the plantar pressure from high to low plantar pressure regions compared with barefoot. In particular, socks with high stitch length have the best performance. By increasing the stitch length, we can significantly reduce the peak plantar pressure of the socks. Correspondingly, the Hertz contact theory resulted in a trend of mean peak pressure reductions in the forefoot region similar to the socks with different stitch densities. CONCLUSIONS: The theoretical results show that by using the Hertz contact theory, static plantar pressure in the forefoot region can be well predicted at a mean error of approximately 9% compared with the other experimental findings.