RESUMEN
SIGNIFICANCE: Individuals with reduced visual acuity (VA) may drive with bioptic telescopes in some jurisdictions. The effect of bioptic telescope use on on-road recognition distances is important for driving safety, as increased recognition distances increase the time available to react to road signs or driving events. PURPOSE: This study aimed to investigate the impact of bioptic telescope use on visual recognition of road signs, traffic lights, and hazards in an on-road driving environment in individuals with reduced VA. METHODS: Ten individuals (mean ± standard deviation age, 39.1 ± 19.1 years) with reduced VA (trained to use bioptic telescopes) participated in a repeated-measures on-road experiment for two viewing conditions, with and without a bioptic telescope (randomized order). Participants underwent a clinical low vision assessment, including high-contrast VA with and without the bioptic telescope aligned, visual fields, and contrast sensitivity testing. For the driving component, participants seated in the front passenger seat of a moving car reported all road signs, traffic lights, and hazards (unpredictable road events that represent a risk to driving safety including other vehicles, cyclists, pedestrians) seen along a route that included suburban roads and highways. Video cameras captured participants' viewing behavior, verbal commentary, and the distance at which three pre-selected road signs were reported. RESULTS: In the eye with the bioptic telescope, high-contrast VA improved from 0.75 ± 0.17 (without) to 0.25 ± 0.1 logMAR with the bioptic telescope. Bioptic telescope use did not affect the percentage of road signs, traffic lights, or hazards correctly recognized but did result in 2.6 times longer recognition distances (49 ± 23 vs. 19 ± 11 m, t9 = 5.02, p<0.001). CONCLUSIONS: Road signs were recognized at significantly longer distances when using a bioptic telescope, confirming their positive impact on timely visual recognition of objects within the driving scene. Future work should explore whether this effect generalizes to individuals using bioptic telescopes when driving a vehicle.
Asunto(s)
Conducción de Automóvil , Telescopios , Baja Visión , Agudeza Visual , Humanos , Agudeza Visual/fisiología , Adulto , Masculino , Femenino , Baja Visión/fisiopatología , Baja Visión/rehabilitación , Persona de Mediana Edad , Adulto Joven , Diseño de Equipo , Percepción Visual/fisiología , Sensibilidad de Contraste/fisiología , Campos Visuales/fisiologíaRESUMEN
Purpose: Bioptic telescopic spectacles can allow individuals with central vision impairment to obtain or maintain driving privileges. The purpose of this study was to (1) compare hazard perception ability among bioptic drivers and traditionally licensed controls, (2) assess the impact of bioptic telescopic spectacles on hazard perception in drivers with vision impairment, and (3) analyze the relationships among vision and hazard detection in bioptic drivers. Methods: Visual acuity, contrast sensitivity, and visual field were measured for each participant. All drivers completed the Driving Habits Questionnaire. Hazard perception testing was conducted using commercially available first-person video driving clips. Subjects signaled when they could first identify a traffic hazard requiring a change of speed or direction. Bioptic drivers were tested with and without their bioptic telescopes in alternating blocks. Hazard detection times for each clip were converted to z-scores, converted back to seconds using the average response time across all videos, and then compared among conditions. Results: Twenty-one bioptic drivers and 21 normally sighted controls participated in the study. The hazard response time of bioptic drivers was improved when able to use the telescope (5.4 ± 1.4 seconds vs 6.3 ± 1.8 seconds without telescope); however, it remained significantly longer than for controls (4.0 ± 1.4 seconds). Poorer visual acuity, contrast sensitivity, and superior visual field sensitivity loss were related to longer hazard response times. Conclusions: Drivers with central vision loss had improved hazard response times with the use of bioptic telescopic spectacles, although their responses were still slower than normally sighted control drivers. Translational Relevance: The use of a bioptic telescope by licensed, visually impaired drivers improves their hazard detection speed on a video-based task, lending support to their use on the road.
Asunto(s)
Conducción de Automóvil , Sensibilidad de Contraste , Telescopios , Agudeza Visual , Humanos , Conducción de Automóvil/psicología , Masculino , Femenino , Agudeza Visual/fisiología , Persona de Mediana Edad , Adulto , Sensibilidad de Contraste/fisiología , Percepción Visual/fisiología , Campos Visuales/fisiología , Personas con Daño Visual/psicología , Anteojos , Anciano , Encuestas y Cuestionarios , Tiempo de Reacción/fisiología , Accidentes de Tránsito/prevención & controlRESUMEN
BACKGROUND: Various ocular implants were suggested as a means of enhancing vision in patients with advanced age related macular degeneration. Recently, a new generation of implantable telescopes has been released. The purpose of this study is to report the surgical technique of implantation along with patient outcomes. METHODS: This work focuses on the surgical technique. Crucial surgical steps are carefully reported along with discussion on main drawbacks and limitations. RESULTS: This approach uses a preloaded delivery system with improved features and requires a smaller incision. First patient outcomes are also reported. CONCLUSIONS: Surgical steps to implant this preloaded intraocular telescope are easier than previous versions, however this remains a complex procedure. Initial patient functional outcomes look promising.
Asunto(s)
Telescopios , Agudeza Visual , Humanos , Agudeza Visual/fisiología , Degeneración Macular/cirugía , Anciano , MiniaturizaciónRESUMEN
As the demand for CO[Formula: see text] laser surgeries continues to grow, the quality of their main instrument, the laser micromanipulator, becomes increasingly important. However, in many surgery systems, a large ratio of the laser power is wasted due to the reflection from the mirror of a telescopic system, like a Cassegrain telescope, back to the laser side, which not only decreases the system's efficiency but can also damage the system itself. In this article, we introduce a new design of the micromanipulator telescope for CO[Formula: see text] laser surgery, which employs a Bessel beam to improve the system efficiency. As in the propagation of a Bessel beam, the power of the light beam can be transferred from the center to a ring shape, the whole power reflected from the first mirror can reach the second mirror and no power goes back to the second mirror hole. The micromanipulator telescope design and optimization are carried out using Zemax Optics Studio, and the integration of the Bessel beam into the system is implemented using MATLAB. Our simulation results show that by applying the appropriate Bessel beam, the system efficiency can reach more than 96%, and the normalized peak irradiance can increase by 40 to 73% for various working distances. In addition to increasing the system efficiency and normalized peak irradiance, resulting in a sharper surgical blade, the use of the Bessel beam enhances the depth of focus, making the system less sensitive to depth misalignment.
Asunto(s)
Telescopios , Simulación por Computador , ReproducciónRESUMEN
Imaging large, cleared samples requires microscope objectives that combine a large field of view (FOV) with a long working distance (WD) and a high numerical aperture (NA). Ideally, such objectives should be compatible with a wide range of immersion media, which is challenging to achieve with conventional lens-based objective designs. Here we introduce the multi-immersion 'Schmidt objective' consisting of a spherical mirror and an aspherical correction plate as a solution to this problem. We demonstrate that a multi-photon variant of the Schmidt objective is compatible with all homogeneous immersion media and achieves an NA of 1.08 at a refractive index of 1.56, 1.1-mm FOV and 11-mm WD. We highlight its versatility by imaging cleared samples in various media ranging from air and water to benzyl alcohol/benzyl benzoate, dibenzyl ether and ethyl cinnamate and by imaging of neuronal activity in larval zebrafish in vivo. In principle, the concept can be extended to any imaging modality, including wide-field, confocal and light-sheet microscopy.
Asunto(s)
Telescopios , Animales , Inmersión , Microscopía/métodos , Pez CebraRESUMEN
3D exoscopy based on Video Telescope Operating Monitor (VITOM) technology provides good visualization quality and portability. There are few data on comparison of extracorporeal telescoping with microsurgical techniques in spinal surgery. OBJECTIVE: To compare the effectiveness of VITOM 3D exoscopy and microsurgical techniques in spinal surgery. MATERIAL AND METHODS: A prospective study included 80 patients (54 men and 26 women). Two groups were distinguished: group 1 (ES, n=40) - VITOM 3D exoscopy, group 2 (SM, n=40) - Pentero 900 surgical microscope. We analyzed surgery time, postoperative rehabilitation, hospital-stay and complications. ES and microsurgical technique were compared using the questionnaire by Takahashi S. and rapid upper limb assessment (RULA). RESULTS: Conventional microsurgical technique was characterized by less surgery time (p<0.05) and morbidity (p=0.02). Postoperative rehabilitation and hospital-stay were similar (p=0.26 and p=0.39, respectively). Image quality in ES was comparable to microsurgical technique in shallow accesses and manipulations perpendicular to skin incision. Availability of neurosurgical instruments at different depths of the wound channel was comparable in both groups. The limitation of ES was length of skin incision, depth of the wound and its visualization at certain angle. These features required expansion of surgical approach or conversion of intervention. In general, surgeons rated intraoperative posture comfort as comparable in both groups that was consistent with the RULA scale. CONCLUSION: VITOM 3D exoscopy is an alternative to traditional microscopy and more ergonomically beneficial in spinal surgery in case of manipulations perpendicular to skin incision and shallow wide accesses. There are several important limitations of this device including difficult manipulations in narrow deep wounds and visualization under certain angle.
Asunto(s)
Telescopios , Masculino , Humanos , Femenino , Estudios Prospectivos , Procedimientos Neuroquirúrgicos/métodos , Microcirugia/métodosRESUMEN
Objective. Oblique-viewing laparoscopes are popular in laparoscopic surgeries where the target anatomy is located in narrow areas. Their viewing direction can be shifted by telescope rotation without changing the laparoscope pose. This rotation also changes laparoscope camera parameters that are estimated by camera calibration to be able to reproject an anatomical model onto the laparoscopic view, creating augmented reality (AR). The aim of this study was to develop a camera model that accounts for these changes, achieving high reprojection accuracy for any telescope rotation.Approach. Camera parameters were acquired by calibrations encompassing a wide telescope rotation range. For those parameters showing periodic changes upon rotation, interpolation models were created and used to establish an updatable camera model. With this model, corner points of a tracked checkerboard were reprojected onto the checkerboard laparoscopic images, at random rotation angles. Root-mean-square reprojection errors (RMSEs) were calculated between the reprojected and imaged corner points.Main results. Reprojection RMSEs were low and approximately independent on telescope rotation angle, over a wide rotation range of 320°. The mean reprojection RMSE was 2.8±0.7 pixels for a conventional laparoscope and 3.6±0.7 pixels for a chip-on-the-tip (COTT) laparoscope, corresponding to 0.3±0.1 mm and 0.4±0.1 mm in world coordinates respectively. Worst-case reprojection errors were about 9 pixels (0.8 mm) for both laparoscopes.Significance. The camera model developed in this study improves on existing models for oblique-viewing laparoscopes because it provides high reprojection accuracy independent of the telescope rotation angle and is applicable for conventional and chip-on-a-tip oblique-viewing laparoscopes. The work presented here is an important step towards creating accurate AR in image-guided interventions where oblique-viewing laparoscopes are used while simultaneously providing the surgeon the flexibility to rotate the telescope to any desired rotation angle.Acronyms. CC: camera coordinates; CCToolbox: camera calibration toolbox; COTT: chip-on-the-tip; CS: camera sensor; DD: decentering distortion; FL: focal length; OTS: optical tracking system; PP: principal point; RD: radial distortion; SI: supplementary information;tHE:hand-eye translation component.
Asunto(s)
Laparoscopía , Telescopios , Laparoscopios , Rotación , Laparoscopía/métodos , CalibraciónRESUMEN
Linear active disturbance rejection control (LADRC) has been widely used to improve the tracking accuracy and anti-disturbance performance of telescope servo control under disturbances. However, the linear extended state observer (LESO) is sensitive to noise, and its bandwidth is limited by the resonant frequency of the telescope. To enhance the LARDC's ability to attenuate disturbances, a novel cascade anti-disturbance structure (NCADS) with LADRC on the outer speed loop and a nonlinear disturbance observer (NDOB) on the inner current loop is proposed. The NDOB compensates for the dominant disturbance through feedforwarding the q-axis current reference, and the LESO compensates for the residual disturbance on the outer speed loop. First, the NCADS is introduced in a three-closed-loop control framework of PMSM. Then, the design method of the controller for each loop and the NDOB are presented, the parameter-tuning method based on bandwidth is demonstrated, and the convergence of the NDOB is proved. Furthermore, to improve the searching and tracking efficiency of wide-field survey telescopes, the nonlinear tracking differentiator (NTD) was modified to plan the transition process of the position loop, which only needs to set the maximum speed and acceleration of the telescope. Finally, simulations and experiments were performed on a 2.5-m-wide field survey telescope. The experimental results verify that the proposed NCADS method has a better anti-disturbance performance and higher tracking precision than the conventional method, and the improved NTD method does not need to tune parameters and achieved a fast and smooth transition process of the position loop.
Asunto(s)
Telescopios , Proyectos de Investigación , AceleraciónRESUMEN
OBJECTIVE: To compare the use of the video telescope operating monitor (VITOM) and use of a conventional unassisted surgical method for treatment of cervical intervertebral disc herniation in dogs. ANIMALS: 39 dogs with cervical intervertebral disc disease. METHODS: Prospective study. Dogs were prospectively nonrandomly assigned to either the VITOM (n = 19) or conventional surgery (20) group depending on VITOM system availability. Signalment and preoperative neurologic status were recorded for all dogs. Preoperative and postoperative CT myelography was performed to compare intervertebral space location, spinal cord dimensions at the decompression level, ventral slot dimensions, and residual disc material. Surgical complications and postoperative neurologic outcomes were recorded. Data were compared between the 2 groups using fixed-effects or mixed-effects models to consider double reading of CT myelography images. RESULTS: No significant differences were noted between the 2 groups regarding the decompression ratio (P = .85), vertebral length body ratio (P = .13), ventral slot width ratio (P = .39), residual disc material (P = .30), and sinus bleeding (P = .12). No significant differences were found between the 2 groups regarding postoperative neurologic grade (P = .17). CLINICAL RELEVANCE: VITOM-assisted ventral slot decompression is equivalent to conventional surgery in treatment of cervical intervertebral disc herniation in dogs. The use of VITOM remains a good alternative to the conventional surgical method.
Asunto(s)
Enfermedades de los Perros , Degeneración del Disco Intervertebral , Desplazamiento del Disco Intervertebral , Disco Intervertebral , Telescopios , Perros , Animales , Desplazamiento del Disco Intervertebral/cirugía , Desplazamiento del Disco Intervertebral/veterinaria , Estudios Prospectivos , Enfermedades de los Perros/cirugía , Degeneración del Disco Intervertebral/cirugía , Degeneración del Disco Intervertebral/veterinaria , Disco Intervertebral/cirugía , Estudios RetrospectivosRESUMEN
We present the observation of a charge-sign dependent solar modulation of galactic cosmic rays (GCRs) with the Calorimetric Electron Telescope onboard the International Space Station over 6 yr, corresponding to the positive polarity of the solar magnetic field. The observed variation of proton count rate is consistent with the neutron monitor count rate, validating our methods for determining the proton count rate. It is observed by the Calorimetric Electron Telescope that both GCR electron and proton count rates at the same average rigidity vary in anticorrelation with the tilt angle of the heliospheric current sheet, while the amplitude of the variation is significantly larger in the electron count rate than in the proton count rate. We show that this observed charge-sign dependence is reproduced by a numerical "drift model" of the GCR transport in the heliosphere. This is a clear signature of the drift effect on the long-term solar modulation observed with a single detector.
Asunto(s)
Radiación Cósmica , Vuelo Espacial , Telescopios , Protones , ElectronesRESUMEN
An experiment of 12C(16O,16O â 4α)12C was performed at a beam energy of 96 MeV. A large number of 4-α events were recorded in coincidence and with full particle identification (PID). This was made possible by employing a series of silicon-strip-based telescopes that provided excellent position and energy resolutions. Four narrow resonances just above the 15.1 MeV state were firmly identified in the α + 12C(7.65 MeV; Hoyle state) decay channel. Combined with the theoretical predictions, these resonant states provide new evidence for the predicted possible Hoyle-like structure in 16O above the 4-α separation threshold. Some very high-lying 4-α resonant states have also been observed and need to be further investigated.
Asunto(s)
Registros , Telescopios , Silicio , VibraciónRESUMEN
Telescopic and conical dental solutions for tooth-borne, implant-borne, and combination tooth/implant-borne removable dental prosthetics have a long and rich history. Traditionally, these restorations have been based on analog techniques. The integration of digital technologies, however, has had a profound impact on these solutions in numerous ways, helping to facilitate efficient fabrication of many technical and clinical facets of these dental prosthetics. This article examines how digital technologies impact telescopic and conical clinical case workflows and technical protocols. It discusses such aspects as intraoral scanning, photogrammetry, primary and secondary telescopes and cones, tertiary structures, and temporary restorations.
Asunto(s)
Implantes Dentales , Telescopios , Flujo de Trabajo , Tecnología Digital , Diseño Asistido por Computadora , Prótesis Dental de Soporte ImplantadoRESUMEN
The establishment of the Nobeyama Radio Observatory (NRO) in 1982 was an important event that greatly influenced the subsequent development of Japanese astronomy. The 45 m radio telescope and the Nobeyama Millimeter Array (NMA) pushed Japanese radio astronomy to the forefront of the world. As a plan beyond the Nobeyama telescopes, the Japanese radio astronomy community considered a large array to achieve unprecedented resolution at millimeter and submillimeter wavelengths under the project name of the Large Millimeter and Submillimeter Array (LMSA). After long and patient discussions and negotiations with the United States and Europe, the LMSA plan eventually led to the ALMA (Atacama Large Millimeter/submillimeter Array) as an international joint project, and the ALMA was inaugurated in 2013. This paper reviews the process from the establishment of the NRO to the realization of the ALMA, including planning of the LMSA, international negotiations, site survey, instrumental developments, and initial science results.