Biodistribution of cerium dioxide and titanium dioxide nanomaterials in rats after single and repeated inhalation exposures.

BACKGROUND: Physiologically based kinetic models facilitate the safety assessment of inhaled engineered nanomaterials (ENMs). To develop these models, high quality datasets on well-characterized ENMs are needed. However, there are at present, several data gaps in the systemic availability of poorly soluble particles after inhalation. The aim of the present study was therefore to acquire two comparable datasets to parametrize a physiologically-based kinetic model. METHOD: Rats were exposed to cerium dioxide (CeO2, 28.4 ± 10.4 nm) and titanium dioxide (TiO2, 21.6 ± 1.5 nm) ENMs in a single nose-only exposure to 20 mg/m3 or a repeated exposure of 2 × 5 days to 5 mg/m3. Different dose levels were obtained by varying the exposure time for 30 min, 2 or 6 h per day. The content of cerium or titanium in three compartments of the lung (tissue, epithelial lining fluid and freely moving cells), mediastinal lymph nodes, liver, spleen, kidney, blood and excreta was measured by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) at various time points post-exposure. As biodistribution is best studied at sub-toxic dose levels, lactate dehydrogenase (LDH), total protein, total cell numbers and differential cell counts were determined in bronchoalveolar lavage fluid (BALF). RESULTS: Although similar lung deposited doses were obtained for both materials, exposure to CeO2 induced persistent inflammation indicated by neutrophil granulocytes influx and exhibited an increased lung elimination half-time, while exposure to TiO2 did not. The lavaged lung tissue contained the highest metal concentration compared to the lavage fluid and cells in the lavage fluid for both materials. Increased cerium concentrations above control levels in secondary organs such as lymph nodes, liver, spleen, kidney, urine and faeces were detected, while for titanium this was found in lymph nodes and liver after repeated exposure and in blood and faeces after a single exposure. CONCLUSION: We have provided insight in the distribution kinetics of these two ENMs based on experimental data and modelling. The study design allows extrapolation at different dose-levels and study durations. Despite equal dose levels of both ENMs, we observed different distribution patterns, that, in part may be explained by subtle differences in biological responses in the lung.

Prosthetic Metals: Release, Metabolism and Toxicity.

The development of metallic joint prostheses has been ongoing for more than a century alongside advancements in hip and knee arthroplasty. Among the materials utilized, the Cobalt-Chromium-Molybdenum (Co-Cr-Mo) and Titanium-Aluminum-Vanadium (Ti-Al-V) alloys are predominant in joint prosthesis construction, predominantly due to their commendable biocompatibility, mechanical strength, and corrosion resistance. Nonetheless, over time, the physical wear, electrochemical corrosion, and inflammation induced by these alloys that occur post-implantation can cause the release of various metallic components. The released metals can then flow and metabolize in vivo, subsequently causing potential local or systemic harm. This review first details joint prosthesis development and acknowledges the release of prosthetic metals. Second, we outline the metallic concentration, biodistribution, and elimination pathways of the released prosthetic metals. Lastly, we discuss the possible organ, cellular, critical biomolecules, and significant signaling pathway toxicities and adverse effects that arise from exposure to these metals.

Parameter grouping and co-estimation in physiologically based kinetic models using genetic algorithms.

Physiologically based kinetic (PBK) models are widely used in pharmacology and toxicology for predicting the internal disposition of substances upon exposure, voluntarily or not. Due to their complexity, a large number of model parameters need to be estimated, either through in silico tools, in vitro experiments, or by fitting the model to in vivo data. In the latter case, fitting complex structural models on in vivo data can result in overparameterization and produce unrealistic parameter estimates. To address these issues, we propose a novel parameter grouping approach, which reduces the parametric space by co-estimating groups of parameters across compartments. Grouping of parameters is performed using genetic algorithms and is fully automated, based on a novel goodness-of-fit metric. To illustrate the practical application of the proposed methodology, two case studies were conducted. The first case study demonstrates the development of a new PBK model, while the second focuses on model refinement. In the first case study, a PBK model was developed to elucidate the biodistribution of titanium dioxide (TiO2) nanoparticles in rats following intravenous injection. A variety of parameter estimation schemes were employed. Comparative analysis based on goodness-of-fit metrics demonstrated that the proposed methodology yields models that outperform standard estimation approaches, while utilizing a reduced number of parameters. In the second case study, an existing PBK model for perfluorooctanoic acid (PFOA) in rats was extended to incorporate additional tissues, providing a more comprehensive portrayal of PFOA biodistribution. Both models were validated through independent in vivo studies to ensure their reliability.

Bioorthogonal catalytic patch.

Bioorthogonal catalysis mediated by transition metals has inspired a new subfield of artificial chemistry complementary to enzymatic reactions, enabling the selective labelling of biomolecules or in situ synthesis of bioactive agents via non-natural processes. However, the effective deployment of bioorthogonal catalysis in vivo remains challenging, mired by the safety concerns of metal toxicity or complicated procedures to administer catalysts. Here, we describe a bioorthogonal catalytic device comprising a microneedle array patch integrated with Pd nanoparticles deposited on TiO2 nanosheets. This device is robust and removable, and can mediate the local conversion of caged substrates into their active states in high-level living systems. In particular, we show that such a patch can promote the activation of a prodrug at subcutaneous tumour sites, restoring its parent drug's therapeutic anticancer properties. This in situ applied device potentiates local treatment efficacy and eliminates off-target prodrug activation and dose-dependent side effects in healthy organs or distant tissues.

Investigation of the influence of TiO2distribution on HA/TiO2composite wetting ability using the dispersant SDBS, high-temperature annealing, and ultrasonication.

The use of composites such as hydroxyapatite (HA)/TiO2in bioapplications has attracted increasing attention in recent years. Herein, for the enhancement wetting ability and biocompatibility, the HA/TiO2composite was subjected to different treatments to improve nanoparticle (NP) distribution and surface energy with an aim of mitigating nanotoxicity concerns. The treatments included ultrasonication, high-temperature annealing, and addition of a dispersant and surfactant, sodium dodecylbenzenesulfonate (SDBS). Contact angle measurement tests revealed the effect of SDBS addition on the distribution of TiO2NPs on the HA surface: a decrease in the contact angle and, thus, an increase in the wetting ability of the HA/TiO2composite were observed. The combination of annealing and SDBS addition treatments allowed for guest TiO2particles to be uniformly distributed on the surface of the host HA particles, showing a rapid conversion from a hydrophobic to superhydrophilic property.In vitroinvestigation suggested that the cell viabilities of annealed HA/TiO2, SDBS-added HA/TiO2, and SDBS-added and annealed HA/TiO2reached 89.7%, 94.7%, and 95.8%, respectively, while those of HA and untreated HA/TiO2were 80.3% and 86.9%, respectively. The modified composites exhibited lower cytotoxicities than the unmodified systems (HA and HA/TiO2). Furthermore, the cell adhesion behavior of the composites was confirmed through actin-4',6-Diamidino-2-phenylindole (DAPI) staining, which showed negligible changes in the cytoskeleton architecture of the cells. This study confirmed that a modified HA/TiO2composite has potential for bioapplications.

The Impacts of Crystalline Structure and Different Surface Functional Groups on Drug Release and the Osseointegration Process of Nanostructured TiO2.

In implantable materials, surface topography and chemistry are the most important in the effective osseointegration and interaction with drug molecules. Therefore, structural and surface modifications of nanostructured titanium dioxide (TiO2) layers are reported in the present work. In particular, the modification of annealed TiO2 samples with -OH groups and silane derivatives, confirmed by X-ray photoelectron spectroscopy, is shown. Moreover, the ibuprofen release process was studied regarding the desorption-desorption-diffusion (DDD) kinetic model. The results proved that the most significant impact on the release profile is annealing, and further surface modifications did not change its kinetics. Additionally, the cell adhesion and proliferation were examined based on the MTS test and immunofluorescent staining. The obtained data showed that the proposed changes in the surface chemistry enhance the samples' hydrophilicity. Moreover, improvements in the adhesion and proliferation of the MG-63 cells were observed.

Possible Adverse Effects of Food Additive E171 (Titanium Dioxide) Related to Particle Specific Human Toxicity, Including the Immune System.

Titanium dioxide (TiO2) is used as a food additive (E171) and can be found in sauces, icings, and chewing gums, as well as in personal care products such as toothpaste and pharmaceutical tablets. Along with the ubiquitous presence of TiO2 and recent insights into its potentially hazardous properties, there are concerns about its application in commercially available products. Especially the nano-sized particle fraction (<100 nm) of TiO2 warrants a more detailed evaluation of potential adverse health effects after ingestion. A workshop organized by the Dutch Office for Risk Assessment and Research (BuRO) identified uncertainties and knowledge gaps regarding the gastrointestinal absorption of TiO2, its distribution, the potential for accumulation, and induction of adverse health effects such as inflammation, DNA damage, and tumor promotion. This review aims to identify and evaluate recent toxicological studies on food-grade TiO2 and nano-sized TiO2 in ex-vivo, in-vitro, and in-vivo experiments along the gastrointestinal route, and to postulate an Adverse Outcome Pathway (AOP) following ingestion. Additionally, this review summarizes recommendations and outcomes of the expert meeting held by the BuRO in 2018, in order to contribute to the hazard identification and risk assessment process of ingested TiO2.

Anthocyanins decrease the internalization of TiO2 nanoparticles into 3D Caco-2 spheroids.

The influence of food components on nanoparticle (NP) internalization indicates a need to investigate the behaviors of NPs in a complex system. This study measured the changes of TiO2 NP colloidal stability and quenching of anthocyanin fluorescence to indicate NP-anthocyanin interactions, and cytotoxicity, oxidative stress, expression of ABC transporters and intracellular Ti concentrations in 3D Caco-2 spheroids co-exposed to NPs and anthocyanins to indicate the influence of anthocyanins on NP bio-effects. The anthocyanins were observed to have minimal impacts on colloidal properties of TiO2 NPs. Meanwhile, NP-anthocyanin co-exposure did not induce cytotoxicity or oxidative stress. The fluorescence quenching study indicated the binding of anthocyanins onto TiO2 NPs, and the binding affinity was inversely correlated with NP internalization into 3D Caco-2 spheroids. This may be partially related with the up-regulation of ABC transporters. Our results may provide novel insights into understanding the interactions of NPs and anthocyanins with human intestinal cells.

Jejunal villus absorption and paracellular tight junction permeability are major routes for early intestinal uptake of food-grade TiO2 particles: an in vivo and ex vivo study in mice.

BACKGROUND: Food-grade TiO2 (E171 in the EU) is widely used as a coloring agent in foodstuffs, including sweets. Chronic dietary exposure raises concerns for human health due to proinflammatory properties and the ability to induce and promote preneoplastic lesions in the rodent gut. Characterization of intestinal TiO2 uptake is essential for assessing the health risk in humans. We studied in vivo the gut absorption kinetics of TiO2 in fasted mice orally given a single dose (40 mg/kg) to assess the ability of intestinal apical surfaces to absorb particles when available without entrapment in the bolus. The epithelial translocation pathways were also identified ex vivo using intestinal loops in anesthetized mice. RESULTS: The absorption of TiO2 particles was analyzed in gut tissues by laser-reflective confocal microscopy and ICP-MS at 4 and 8 h following oral administration. A bimodal pattern was detected in the small intestine: TiO2 absorption peaked at 4 h in jejunal and ileal villi before returning to basal levels at 8 h, while being undetectable at 4 h but significantly present at 8 h in the jejunal Peyer's patches (PP). Lower absorption occurred in the colon, while TiO2 particles were clearly detectable by confocal microscopy in the blood at 4 and 8 h after treatment. Ex vivo, jejunal loops were exposed to the food additive in the presence and absence of pharmacological inhibitors of paracellular tight junction (TJ) permeability or of transcellular (endocytic) passage. Thirty minutes after E171 addition, TiO2 absorption by the jejunal villi was decreased by 66% (p < 0.001 vs. control) in the presence of the paracellular permeability blocker triaminopyrimidine; the other inhibitors had no significant effect. Substantial absorption through a goblet cell (GC)-associated pathway, insensitive to TJ blockade, was also detected. CONCLUSIONS: After a single E171 dose in mice, early intestinal uptake of TiO2 particles mainly occurred through the villi of the small intestine, which, in contrast to the PP, represent the main absorption surface in the small intestine. A GC-associated passage and passive diffusion through paracellular TJ spaces between enterocytes appeared to be major absorption routes for transepithelial uptake of dietary TiO2.

Derivation of whole blood biomonitoring equivalents for titanium for the interpretation of biomonitoring data.

Biomonitoring equivalents (BEs) have been increasingly applied for biomonitoring purposes by regulatory bodies worldwide. The present report describes the development of a BE for titanium based on a 4-step process: (i) identification of a critical study/point of departure (PoD) supporting an established oral exposure guidance value (OEGV);, (ii) review the available oral PK data and application of a pharmacokinetic model for titanium; (iii) selection of the most appropriate biomarker of exposure in a specific tissue and calculation of steady-state tissue levels corresponding to the PoD in the critical study; and (iv) derivation of BE value adjusting for the uncertainties considered in the original OEGV assessment. Using the above 4-step approach, a blood BE value of 32.5 µg titanium/L was derived. Key components of the analysis included a pharmacokinetic model developed by investigators at the Netherlands National Institute of Public Health (RIVM) and a two-year rodent bioassay of titanium conducted by the US National Cancer Institute. The most sensitive pharmacokinetic parameter involved in the current BE derivation is the oral absorption factor of 0.02%. The provisional BE proposed in this article may be updated as new information on the pharmacokinetics of titanium becomes available.

Determination of titanium dioxide nanoparticles used in various foods.

Titanium dioxide (TiO2) is commonly used in foods with code E171. There is information on the food packaging that it contains E171 in the ingredients section. However, there is no information on the amount of E171 used as ingredient. Therefore, determination of TiO2 content of foods is extremely important for human health. In this study, confectionary foods, chewing gums, chocolates and white colored foods were investigated. TiO2 levels of investigated foods were determined by inductively coupled plasma optical emission spectrometry (ICP-OES). The average titanium dioxide concentrations were found ranging from 3 to 2400 mg kg-1. The size of TiO2 particles in the foods samples was determined with transmission electron microscopy (TEM). Titanium dioxide nanoparticles in the studied foods were found to vary in size from 30 to 410 nm.

Oral exposure of titanium oxide nanoparticles induce ileum physical barrier dysfunction via Th1/Th2 imbalance.

In this work, we aimed to evaluate the adverse effects and the mechanism of intestinal barrier caused by titanium dioxide nanoparticles (TiO2 NPs). Here, the effects of two different dosages (300 and 1200 mg/kg) of TiO2 NPs on female mice (n = 5) were investigated. After 28-day oral exposure, the results of Ti content were significantly increased in the ileum in comparison with the control. The histopathological structure index of the ileum was significantly changed after TiO2 NPs exposure; villi height and crypt depth were decreased and increased, respectively. Meanwhile, TiO2 NPs treatment also significantly altered the transcription levels of genes. First, the GATA-3 and STAT-4 were upregulation and downregulation, respectively. Second, gene expressions of the Zonula Occludens-1, claudin (CLDN)-12, occludin, and myosin light chain kinase were significantly upregulated, while the CLDN-3 was decreased. Finally, the caspase-3, caspase-9, and caspase-12 were upregulated. The results of TUNEL staining indicated apoptosis in the ileum. In general, TiO2 NPs treatment significantly changed the intestine physical barrier in a dose-dependent manner. The toxicity of TiO2 NPs could be through the imbalance in the Th1/Th2.

Design, Synthesis, Computational, and Preclinical Evaluation of natTi/45Ti-Labeled Urea-Based Glutamate PSMA Ligand.

Despite promising anti-cancer properties in vitro, all titanium-based pharmaceuticals have failed in vivo. Likewise, no target-specific positron emission tomography (PET) tracer based on the radionuclide 45Ti has been developed, notwithstanding its excellent PET imaging properties. In this contribution, we present liquid-liquid extraction (LLE) in flow-based recovery and the purification of 45Ti, computer-aided design, and the synthesis of a salan-natTi/45Ti-chelidamic acid (CA)-prostate-specific membrane antigen (PSMA) ligand containing the Glu-urea-Lys pharmacophore. The compound showed compromised serum stability, however, no visible PET signal from the PC3+ tumor was seen, while the ex vivo biodistribution measured the tumor accumulation at 1.1% ID/g. The in vivo instability was rationalized in terms of competitive citrate binding followed by Fe(III) transchelation. The strategy to improve the in vivo stability by implementing a unimolecular ligand design is presented.

3D-Printed Titanium Cage with PVA-Vancomycin Coating Prevents Surgical Site Infections (SSIs).

Many coating materials have been studied to prevent surgical site infections (SSIs). However, antibacterial coating on surfaces show weak adhesion using the traditional titanium (Ti) cage, resulting in low efficacy for preventing SSIs after spinal surgery. Herein, a 3D-printed Ti cage combined with a drug-releasing system is developed for in situ drug release and bacteria killing, leading to prevention of SSIs in vitro and in vivo. First, a 3D-printed Ti cage is designed and prepared by the Electron Beam Melting (EBM) method. Second, polyvinyl alcohol (PVA) containing hydrophilic vancomycin hydrochloride (VH) is scattered across the surface of 3D-printed porous Ti (Ti-VH@PVA) cages. Ti-VH@PVA cages show an efficient drug-releasing profile and excellent bactericidal effect for three common bacteria after more than seven days in vitro. In addition, Ti-VH@PVA cages exhibit reliable inhibition of inflammation associated with Staphylococcus aureus and effective bone regeneration capacity in a rabbit model of SSIs. The results indicate that Ti-VH@PVA cages have potential advantages for preventing SSIs after spinal surgery.

Synthesis and Design of Norfloxacin drug delivery system based on PLA/TiO2 nanocomposites: Antibacterial and antitumor activities.

Biodegradable, biocompatible and non-toxic polymer-based nanoparticles are the novel nanotherapeutic tool which is used for adsorption and encapsulation drugs. Extended release formulation of Norfloxacin antibiotic, chemotherapeutic agent model, drug in the form of encapsulated and loaded poly (lactic acid) nanocomposites-based Titanium dioxide (PLA/TiO2) was developed. Nanocomposites were prepared using different contents (1, 3, 5 wt %) and morphologies of TiO2 (spheres (S), rods (R). The dispersion of TiO2 was aided by ultrasonic technique followed by solution casting method. The morphology, particle size, crystallite size and composition of the nanocomposites were examined by SEM, TEM, XRD and FTIR. The crystallinity and thermal behavior of the nanocomposites were characterized by DSC and TGA. NOR was loaded onto TiO2 nanospheres (NOR@TiO2 (S)) and the optimum conditions for loading was investigated. Pseudo-second order model was the more adequate to represent the kinetic data. The equilibrium data followed Freundlich adsorption isotherm and the adsorption process was exothermic. NOR@TiO2 (S) was encapsulated into PLA and in vitro release behavior of drug was compared with NOR adsorbed into PLA (NOR@PLA) and nanocomposites (NOR@PLA/TiO2) using different pH (6.7, 7.4) media. To study the mechanism of NOR release, first order, Higuchi, Hixon Crowell and Korsmeyer-Peppas models were applied on the experimental results. The cytotoxicity of the loaded nanocomposites using MTT assay was studied against HepG 2, MCF-7, HCT 116, PC-3, Hela, WI-38 and WISH cells. The encapsulated (NOR@ 5S/En PLA) showed the highest cytotoxic efficacy with moderate effect on normal cells. Moreover, the nanocomposites have great potential against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Salmonella and Klebsiella pneumonia. NOR@ PLA/TiO2 nanocomposites showed better antibacterial efficacy than NOR encapsulated nanocomposites. The nanocomposites could be effective vehicles for the sustained delivery of toxic anticancer drug.

Foliar spray of TiO2 nanoparticles prevails over root application in reducing Cd accumulation and mitigating Cd-induced phytotoxicity in maize (Zea mays L.).

Cadmium (Cd) pollution is considered one of the global environmental issues due to its adverse effects on plant and human health. With the rapid development of nanotechnology and the practical application of engineered nanoparticles (ENPs) in agriculture, the mechanisms underlying the interactions between NPs and heavy metal on their uptake, accumulation, and phytotoxicity in crops are still not fully understood. Therefore, the impact of TiO2 NPs (0, 100, 250 mg/L) and Cd (0, 50 µM) co-exposure on hydroponic maize (Zea mays L.) was determined under two exposure modes. Results showed that root co-exposure to TiO2 NPs and 100 mg/L Cd significantly enhanced Cd uptake and produced greater phytotoxicity in maize than foliar exposure to TiO2 NPs. Meanwhile, plant dry weight and chlorophyll content showed a reduction of 45.3% and 50.5%, respectively, when compared with single Cd treatment. In addition, the accumulation of Ti in shoots and roots increased by 1.61 and 4.29 times, respectively when root exposure to 250 mg/L TiO2 NPs. By contrast, foliar exposure of TiO2 NPs could markedly decrease shoot Cd contents from 15.2% to 17.8% and had a stronger influence on alleviating Cd-induced toxicity via increasing superoxide dismutase (SOD) and glutathione S-transferase (GST) activities and upregulating several metabolic pathways, including galactose metabolism and citrate cycle, alanine, aspartate and glutamate metabolism, as well as glycine, serine and threonine metabolism. This study provides a new strategy for the application of TiO2 NPs in crop safety production in Cd contaminated soils.

Safety of titanium dioxide nanoparticles in cosmetics.

Titanium dioxide (TiO2 ) is widely used in a variety of products including cosmetics. TiO2 in its nanoparticle form (nano-TiO2 ) is now the only form used as an ultraviolet (UV) filter in sunscreens, but also in some day creams, foundations and lip balms. While its efficacy as a UV filter is proven in the prevention of skin cancers and sunburns, some concerns have been raised about its safety. Indeed, considering its small size, nano-TiO2 is suspected to penetrate dermal, respiratory or gastrointestinal barriers, disseminate in the body and therefore constitute a potential risk to the consumer. At the skin level, most studies performed in humans or animals showed that nano-TiO2 did not penetrate beyond the outer layers of stratum corneum to viable cells and did not reach the general circulation, either in healthy or in compromised skin. The Scientific Committee on Consumer Safety (SCCS) considers nano-TiO2 as a non-sensitizer and as mild- or non-irritant to skin and concludes in no evidence of carcinogenicity (supported by the European Chemicals Agency), mutagenicity or reproductive toxicity after dermal exposure to nano-TiO2 . According to the SCCS, nano-TiO2 from sunscreens does not present any health risk when applied on the skin at a concentration up to 25%. However, the SCCS does not recommend the use of nano-TiO2 in formulations that may lead to exposure of the consumer's lungs by inhalation (sprayable products and powders). Indeed, even if human data are sparse and inconsistent, lung inflammation was reported in animals. In 2016, the EU Cosmetic Regulation made nano-TiO2 as an authorized UV filter, except in products that could lead to exposure of the lungs. After oral exposure, nano-TiO2 absorption and toxicity are limited. The incidental oral exposure to nano-TiO2 contained in lip balms is thus not expected to induce adverse health effects.

Carcinogenic effect of potassium octatitanate (POT) fibers in the lung and pleura of male Fischer 344 rats after intrapulmonary administration.

BACKGROUND: Potassium octatitanate fibers (K2O•8TiO2, POT fibers) are used as an asbestos substitute. Their physical characteristics suggest that respirable POT fibers are likely to be carcinogenic in the lung and pleura. However, previous 2-year inhalation studies reported that respired POT fibers had little or no carcinogenic potential. In the present study ten-week old male F344 rats were left untreated or were administered vehicle, 0.25 or 0.5 mg rutile-type nano TiO2 (r-nTiO2), 0.25 or 0.5 mg POT fibers, or 0.5 mg MWCNT-7 by intra-tracheal intra-pulmonary spraying (TIPS), and then observed for 2 years. RESULTS: There were no differences between the r-nTiO2 and control groups. The incidence of bronchiolo-alveolar cell hyperplasia was significantly increased in the groups treated with 0.50 mg POT and 0.50 mg MWCNT-7. The overall incidence of lung tumors, however, was not increased in either the POT or MWCNT-7 treated groups. Notably, the carcinomas that developed in the POT and MWCNT-7 treated rats were accompanied by proliferative fibrous connective tissue while the carcinomas that developed in the untreated rats and the r-nTiO2 treated rats were not (carcinomas did not develop in the vehicle control rats). In addition, the carcinoma that developed in the rat treated with 0.25 mg POT was a squamous cell carcinoma, a tumor that develops spontaneously in about 1 per 1700 rats. The incidence of mesothelial cell hyperplasia was 4/17, 7/16, and 10/14 and the incidence of malignant mesothelioma was 3/17, 1/16, and 2/14 in the 0.25 mg POT, 0.5 mg POT, and MWCNT-7 treated groups, respectively. Neither mesothelial cell hyperplasia nor mesothelioma developed in control rats or the rats treated with r-nTiO2. Since the incidence of spontaneously occurring malignant mesothelioma in rats is extremely low, approximately 1 per 1000 animals (Japan Bioassay Research Center [JBRC] historical control data), the development of multiple malignant mesotheliomas in the POT and MWCNT-7 treated groups was biologically significant. CONCLUSION: The incidence of pleural mesotheliomas in male F344 rats administered POT fibers and MWCNT-7 was significantly higher than the JBRC historical control data, indicating that the incidence of pleural mesothelioma in the groups administered POT fibers and MWCNT-7 fibers via the airway using TIPS was biologically significant. The incidence of type II epithelial cell hyperplasia and the histology of the carcinomas that developed in the POT treated rats also indicates that respirable POT fibers are highly likely to be carcinogenic in the lungs of male F344 rats.

Distribution of nickel and chromium containing particles from tattoo needle wear in humans and its possible impact on allergic reactions.

BACKGROUND: Allergic reactions to tattoos are amongst the most common side effects occurring with this permanent deposition of pigments into the dermal skin layer. The characterization of such pigments and their distribution has been investigated in recent decades. The health impact of tattoo equipment on the extensive number of people with inked skin has been the focus of neither research nor medical diagnostics. Although tattoo needles contain high amounts of sensitizing elements like nickel (Ni) and chromium (Cr), their influence on metal deposition in skin has never been investigated. RESULTS: Here, we report the deposition of nano- and micrometer sized tattoo needle wear particles in human skin that translocate to lymph nodes. Usually tattoo needles contain nickel (6-8%) and chromium (15-20%) both of which prompt a high rate of sensitization in the general population. As verified in pig skin, wear significantly increased upon tattooing with the suspected abrasive titanium dioxide white when compared to carbon black pigment. Additionally, scanning electron microscopy of the tattoo needle revealed a high wear after tattooing with ink containing titanium dioxide. The investigation of a skin biopsy obtained from a nickel sensitized patient with type IV allergy toward a tattoo showed both wear particles and iron pigments contaminated with nickel. CONCLUSION: Previously, the virtually inevitable nickel contamination of iron pigments was suspected to be responsible for nickel-driven tattoo allergies. The evidence from our study clearly points to an additional entry of nickel to both skin and lymph nodes originating from tattoo needle wear with an as yet to be assessed impact on tattoo allergy formation and systemic sensitization.

Repeated administration of the food additive E171 to mice results in accumulation in intestine and liver and promotes an inflammatory status.

Titanium dioxide (TiO2) is widely used in pharmaceuticals preparations, cosmetics, and as a food additive (E171). It contains microparticles and a fraction of nanoparticles (NPs) which can be absorbed systemically by humans after ingestion. Increasing concern has been aroused about the impact of oral exposure to TiO2 NPs from dietary and non-dietary sources on human health. In spite of several toxicological studies conducted in recent years, a solid risk assessment of oral exposure to E171 has not been satisfactorily achieved. We investigated whether repeated oral administration of E171 to mice at a dose level (5 mg/kg body weight for 3 days/week for 3 weeks) comparable to estimated human dietary exposure, results in TiO2 deposition in the digestive system and internal organs, and in molecular and cellular alterations associated with an inflammatory response. To reproduce the first phase of digestion, a new administration approach involving the dripping of the E171 suspension into the mouth of mice was applied. Significant accumulation of titanium was observed in the liver and intestine of E171-fed mice; in the latter a threefold increase in the number of TiO2 particles was also measured. Titanium accumulation in liver was associated with necroinflammatory foci containing tissue monocytes/macrophages. Three days after the last dose, increased superoxide production and inflammation were observed in the stomach and intestine. Overall, the present study indicates that the risk for human health associated with dietary exposure to E171 needs to be carefully considered.