Comparison of measurements and calculated lens power using three biometers: a Scheimpflug tomographer with partial coherence interferometry and two swept source optical coherence tomographers.

PURPOSE: To compare the biometric measurements obtained from the Pentacam AXL Wave, IOLMaster 700, and ANTERION and calculate the recommended intraocular lens power using the Barrett Formulae. METHODS: This was a retrospective cross-sectional study of patients who underwent biometry using the Pentacam AXL Wave, IOLMaster 700, and ANTERION. Flat keratometry (K1), steep keratometry (K2), anterior chamber depth (ACD), and axial length (AL) from each device were measured and compared. These parameters were used to calculate the recommended IOL powers using the Barrett formula. RESULTS: The study included 252 eyes of 153 patients. The IOLMaster had the highest acquisition rate among the two biometers. The Pentacam obtained the shortest mean AL, the IOLMaster measured the highest mean keratometry values, and the ANTERION measured the highest mean ACD. In terms of pairwise comparisons, keratometry and axial length were not significantly different between the Pentacam-IOLMaster and ANTERION-IOLMaster groups, while the rest of the pairwise comparisons were statistically significant. In nontoric and toric eyes, 35-45% of patients recommended the same sphere of IOL power. In another 30-40%, the Pentacam and ANTERION recommended an IOL power one step greater than that of the IOLMaster-derived data. 50% of the study population recommended the same toric-cylinder IOL power. CONCLUSIONS: The Pentacam AXL Wave, IOLMaster 700, and ANTERION can reliably provide data for IOL power calculations; however, these data are not interchangeable. In nontoric and toric eyes, 35-45% of cases recommended the same sphere IOL power, and in another 30-40%, the Pentacam and ANTERION recommended one-step higher IOL power than the IOLMaster-derived data. In targeting emmetropia, selecting the first plus IOL power is advisable when using the Pentacam and ANTERION to approximate the IOL power calculations recommended by the IOLMaster 700.

All-reflective tethered capsule endoscope for multimodal optical coherence tomography in the esophagus.

Significance: Esophageal cancer is becoming increasingly prevalent in Western countries. Early detection is crucial for effective treatment. Multimodal imaging combining optical coherence tomography (OCT) with complementary optical imaging techniques may provide enhanced diagnostic capabilities by simultaneously assessing tissue morphology and biochemical content. Aim: We aim to develop a tethered capsule endoscope (TCE) that can accommodate a variety of point-scanning techniques in addition to OCT without requiring design iterations on the optical or mechanical design. Approach: We propose a TCE utilizing exclusively reflective optics to focus and steer light from and to a double-clad fiber. Specifically, we use an ellipsoidal mirror to achieve finite conjugation between the fiber tip and the imaging plane. Results: We demonstrate a functional all-reflective TCE. We first detail the design, fabrication, and assembly steps required to obtain such a device. We then characterize its performance and demonstrate combined OCT at 1300 nm and visible spectroscopic imaging in the 500- to 700-nm range. Finally, we discuss the advantages and limitations of the proposed design. Conclusions: An all-reflective TCE is feasible and allows for achromatic high-quality imaging. Such a device could be utilized as a platform for testing various combinations of modalities to identify the optimal candidates without requiring design iterations.

Motor-free telerobotic endomicroscopy for steerable and programmable imaging in complex curved and localized areas.

Intraluminal epithelial abnormalities, potential precursors to significant conditions like cancer, necessitate early detection for improved prognosis. We present a motor-free telerobotic optical coherence tomography (OCT) endoscope that offers high-resolution intraluminal imaging and overcomes the limitations of traditional systems in navigating curved lumens. This system incorporates a compact magnetic rotor with a rotatable diametrically magnetized cylinder permanent magnet (RDPM) and a reflector, effectively mitigating thermal and electrical risks by utilizing an external magnetic field to maintain temperature increases below 0.5 °C and generated voltage under 0.02 mV. Additionally, a learning-based method corrects imaging distortions resulting from nonuniform rotational speeds. Demonstrating superior maneuverability, the device achieves steerable angles up to 110° and operates effectively in vivo, providing distortion-free 3D programmable imaging in mouse colons. This advancement represents a significant step towards guidewire-independent endomicroscopy, enhancing both safety and potential patient outcomes.

Optical coherence tomography otoscope for imaging of tympanic membrane and middle ear pathology.

Significance: Pathologies within the tympanic membrane (TM) and middle ear (ME) can lead to hearing loss. Imaging tools available in the hearing clinic for diagnosis and management are limited to visual inspection using the classic otoscope. The otoscopic view is limited to the surface of the TM, especially in diseased ears where the TM is opaque. An integrated optical coherence tomography (OCT) otoscope can provide images of the interior of the TM and ME space as well as an otoscope image. This enables the clinicians to correlate the standard otoscopic view with OCT and then use the new information to improve the diagnostic accuracy and management. Aim: We aim to develop an OCT otoscope that can easily be used in the hearing clinic and demonstrate the system in the hearing clinic, identifying relevant image features of various pathologies not apparent in the standard otoscopic view. Approach: We developed a portable OCT otoscope device featuring an improved field of view and form-factor that can be operated solely by the clinician using an integrated foot pedal to control image acquisition. The device was used to image patients at a hearing clinic. Results: The field of view of the imaging system was improved to a 7.4 mm diameter, with lateral and axial resolutions of 38 µ m and 33.4 µ m , respectively. We developed algorithms to resample the images in Cartesian coordinates after collection in spherical polar coordinates and correct the image aberration. We imaged over 100 patients in the hearing clinic at USC Keck Hospital. Here, we identify some of the pathological features evident in the OCT images and highlight cases in which the OCT image provided clinically relevant information that was not available from traditional otoscopic imaging. Conclusions: The developed OCT otoscope can readily fit into the hearing clinic workflow and provide new relevant information for diagnosing and managing TM and ME disease.

Optical Assessment of Photoreceptor Function Over the Macula.

Purpose: The purpose of this study was to develop next-generation functional photoreceptor imaging using ultrahigh-speed swept-source optical coherence tomography (UHS-SS-OCT) and split-spectrum amplitude-decorrelation optoretinography (SSADOR) algorithm. The advancement enables rapid surveying of large retinal areas, promising non-contact, objective, and quantifiable measurements of macular visual function. Methods: We designed and built a UHS-SS-OCT prototype instrument using a wavelength tunable laser with 1 MHz A-scan rate. The functional scanning protocol records 5 repeated volumes in 3 seconds. A flash pattern selectively exposes the imaged retina area. SSADOR quantifies photoreceptor light response by extracting optical coherence tomography (OCT) signal changes within the photoreceptor outer segment before and after the flash. Results: The study prospectively enrolled 16 eyes from 8 subjects, demonstrating the ability to measure photoreceptor light response over a record field of view (3 × 3 mm2) with high topographical resolution (approximately 100 µm). The measured SSADOR signal corresponds to the flashed pattern, whose amplitude also correlates with flash strength, showing consistency and reproducibility across subjects. Conclusions: The integration of high-performance UHS-SS-OCT and SSADOR enables characterizing photoreceptor function over a clinically meaningful field of view, while maintaining a workflow that can be integrated into routine clinical tests and trials. The new approach allows detecting changes in photoreceptor light response with high sensitivity and can detect small focal impairments. Translational Relevance: This innovative advance can enable us to detect early photoreceptor abnormalities, as well as help to stage and monitor degenerative retinal diseases, potentially providing a surrogate visual function marker for retinal diseases and accelerating therapeutic development through a safe and efficient outcome endpoint.

Optimization of handheld spectrally encoded coherence tomography and reflectometry for point-of-care ophthalmic diagnostic imaging.

Significance: Handheld optical coherence tomography (HH-OCT) systems enable point-of-care ophthalmic imaging in bedridden, uncooperative, and pediatric patients. Handheld spectrally encoded coherence tomography and reflectometry (HH-SECTR) combines OCT and spectrally encoded reflectometry (SER) to address critical clinical challenges in HH-OCT imaging with real-time en face retinal aiming for OCT volume alignment and volumetric correction of motion artifacts that occur during HH-OCT imaging. Aim: We aim to enable robust clinical translation of HH-SECTR and improve clinical ergonomics during point-of-care OCT imaging for ophthalmic diagnostics. Approach: HH-SECTR is redesigned with (1) optimized SER optical imaging for en face retinal aiming and retinal tracking for motion correction, (2) a modular aluminum form factor for sustained alignment and probe stability for longitudinal clinical studies, and (3) one-handed photographer-ergonomic motorized focus adjustment. Results: We demonstrate an HH-SECTR imaging probe with micron-scale optical-optomechanical stability and use it for in vivo human retinal imaging and volumetric motion correction. Conclusions: This research will benefit the clinical translation of HH-SECTR for point-of-care ophthalmic diagnostics.

Partial coherence enhances parallelized photonic computing.

Advancements in optical coherence control1-5 have unlocked many cutting-edge applications, including long-haul communication, light detection and ranging (LiDAR) and optical coherence tomography6-8. Prevailing wisdom suggests that using more coherent light sources leads to enhanced system performance and device functionalities9-11. Our study introduces a photonic convolutional processing system that takes advantage of partially coherent light to boost computing parallelism without substantially sacrificing accuracy, potentially enabling larger-size photonic tensor cores. The reduction of the degree of coherence optimizes bandwidth use in the photonic convolutional processing system. This breakthrough challenges the traditional belief that coherence is essential or even advantageous in integrated photonic accelerators, thereby enabling the use of light sources with less rigorous feedback control and thermal-management requirements for high-throughput photonic computing. Here we demonstrate such a system in two photonic platforms for computing applications: a photonic tensor core using phase-change-material photonic memories that delivers parallel convolution operations to classify the gaits of ten patients with Parkinson's disease with 92.2% accuracy (92.7% theoretically) and a silicon photonic tensor core with embedded electro-absorption modulators (EAMs) to facilitate 0.108 tera operations per second (TOPS) convolutional processing for classifying the Modified National Institute of Standards and Technology (MNIST) handwritten digits dataset with 92.4% accuracy (95.0% theoretically).

Tissue characterization using axicon probe-assisted common-path optical coherence tomography.

In this work, a common-path optical coherence tomography (OCT) system is demonstrated for characterizing the tissue in terms of some optical properties. A negative axicon structure chemically etched inside the fiber tip is employed as optical probe in the OCT. This probe generates a quality Bessel beam owning a large depth-of-field, ∼700 µm and small central spot size, ∼3 µm. The OCT system is probing the sample without using any microscopic lens. For experimental validation, the OCT imaging of chicken tissue has been obtained along with estimation of its refractive index and optical attenuation coefficient. Afterwards, the cancerous tissue is differentiated from the normal tissue based on the OCT imaging, refractive index, and optical attenuation coefficient. The respective tissue samples are collected from the human liver and pancreas. This probe could be a useful tool for endoscopic or minimal-invasive inspection of malignancy inside the tissue either at early-stage or during surgery.

Evaluation of a new portable corneal topography system for self-measurement using smartphones: a pilot study.

PURPOSE: Herein, we propose the use of the "KeraVio Ring", which is a portable, selfie-based, smartphone-attached corneal topography system that is based on the Placido ring videokeratoscope. The goal of this study was to evaluate and compare corneal parameters between KeraVio Ring and conventional corneal tomography images. METHODS: We designed the KeraVio Ring as a device comprising 3D-printed LED rings for generating Placido rings that can be attached to a smartphone. Two LED rings are attached to a cone-shaped device, and both corneas are illuminated. Selfies were taken using the KeraVio Ring attached to the smartphone without assistance from any of the examiners. Captured Placido rings on the cornea were analysed by intelligent software to calculate corneal parameters. Patients with normal, keratoconus, or LASIK-treated eyes were included. Anterior segment optical coherence tomography (AS-OCT) was also performed for each subject. RESULTS: We found highly significant correlations between the steepest and flattest keratometry, corneal astigmatism, and vector components obtained with the KeraVio Ring and AS-OCT. In subjects with normal, keratoconus, and LASIK-treated eyes, the mean difference in corneal astigmatism between the two devices was -0.8 ± 1.4 diopters (D) (95% limits of agreement (LoA), -3.6 to 2.0), -1.8 ± 3.7 D (95% LoA, -9.1 to 5.5), and -1.5 ± 1.3 D (95% LoA, -4.0 to 1.1), respectively. CONCLUSIONS: The experimental results showed that the corneal parameters obtained by the KeraVio Ring were correlated with those obtained with AS-OCT. The KeraVio Ring has the potential to address an unmet need by providing a tool for portable selfie-based corneal topography.

Coaxial Bright and Dark Field Optical Coherence Tomography.

To improve the signal collection efficiency of Optical Coherence Tomography (OCT) for biomedical applications. A novel coaxial optical design was implemented, utilizing a wavefront-division beam splitter in the sample arm with a 45-degree rod mirror. This design allowed for the simultaneous collection of bright and dark field signals. The bright field signal was detected within its circular aperture in a manner similar to standard OCT, while the dark field signal passed through an annular-shaped aperture and was collected by the same spectrometer via a fiber array. This new configuration improved the signal collection efficiency by ∼3 dB for typical biological tissues. Dark-field OCT images were found to provide higher resolution, contrast and distinct information compared to standard bright-field OCT. By compounding bright and dark field images, speckle noise was suppressed by ∼ √2 . These advantages were validated using Teflon phantoms, chicken breast ex vivo, and human skin in vivo. This new OCT configuration significantly enhances signal collection efficiency and image quality, offering great potential for improving OCT technology with better depth, contrast, resolution, speckles, and signal-to-noise ratio. We believe that the bright and dark field signals will enable more comprehensive tissue characterization with the angled scattered light. This advancement will greatly promote the OCT technology in various clinical and biomedical research applications.

Repeatability and reproducibility of quantitative OCT angiography measurements from table-top and portable Flex Spectralis devices.

PURPOSE: The recent development of a portable investigational handheld OCT-angiography (OCTA) device has allowed for expansion of imaging into the operating room (OR) in addition to standard in-clinic imaging. The aim of this study was to assess intravisit repeatability and intervisit reproducibility of retinal microvasculature measures and central retinal thickness for in-clinic table-top and portable OR compatible OCTA devices. METHODS: Repeated 10 × 10 OCTA images were acquired in 20 healthy adult participants on two separate visit days using Spectralis spectral-domain OCTA table-top and investigational armature suspended Flex systems. Intravisit and intervisit intraclass correlation coefficients and average absolute percent difference were calculated for quantitative microvasculature measures and CRT. RESULTS: 120 OCTA images were acquired from 20 subjects (n = 20, mean age 26.7 ± 1.61 years, range 24-30 years) with both devices across two separate imaging days. FAZ and CRT measurements had near complete intravisit and intervisit agreement with ICCs between .97 and 1 for both table-top (FAZ ICC .97, .97; CRT ICC .98-1, .98-.99) and Flex (FAZ ICC .97, .95; CRT ICC .99-1, .98-.99) devices. Vessel density measures demonstrated greater variance with only fair to strong agreement (ICC .32-.75) and average absolute percent differences ranging from 2.96 to 6.63%. CONCLUSION: FAZ and CRT measures for both devices demonstrated high repeatability and reproducibility; retinal vessel density measures demonstrated less. Differences of less than 7% for retinal microvasculature measurements across time and devices are most likely attributable to expectable variance between repeat scans.

Balanced detection spectral-domain optical coherence tomography with a single line-scan camera.

This paper describes a balanced detection spectral-domain optical coherence tomography (BD-SD-OCT) system for suppressing autocorrelation (AC) artifacts and increasing the signal-to-noise ratio (SNR). The system employed three optical fiber couplers to generate two phase-opposed interference spectra that were acquired by a single line-scan camera simultaneously. When compared with conventional unbalanced detection SD-OCT systems, the developed BD-SD-OCT system improved the SNR by 5.4-6 dB and suppressed the AC term by 5-10 dB. The imaging quality of the BD-SD-OCT system was evaluated by in vivo imaging of human nail folds and retinas.

High speed, long range, deep penetration swept source OCT for structural and angiographic imaging of the anterior eye.

This study reports the development of prototype swept-source optical coherence tomography (SS-OCT) technology for imaging the anterior eye. Advances in vertical-cavity surface-emitting laser (VCSEL) light sources, signal processing, optics and mechanical designs, enable a unique combination of high speed, long range, and deep penetration that addresses the challenges of anterior eye imaging. We demonstrate SS-OCT with a 325 kHz A-scan rate, 12.2 µm axial resolution (in air), and 15.5 mm depth range (in air) at 1310 nm wavelength. The ultrahigh 325 kHz A-scan rate not only facilitates biometry measurements by minimizing acquisition time and thus reducing motion, but also enables volumetric OCT for comprehensive structural analysis and OCT angiography (OCTA) for visualizing vasculature. The 15.5 mm (~ 11.6 mm in tissue) depth range spans all optical surfaces from the anterior cornea to the posterior lens capsule. The 1310 nm wavelength range enables structural OCT and OCTA deep in the sclera and through the iris. Achieving high speed and long range requires linearizing the VCSEL wavenumber sweep to efficiently utilize analog-to-digital conversion bandwidth. Dual channel recording of the OCT and calibration interferometer fringe signals, as well as sweep to sweep wavenumber compensation, is used to achieve invariant 12.2 µm (~ 9.1 µm in tissue) axial resolution and optimum point spread function throughout the depth range. Dynamic focusing using a tunable liquid lens extends the effective depth of field while preserving the lateral resolution. Improved optical and mechanical design, including parallax "split view" iris cameras and stable, ergonomic patient interface, facilitates accurate instrument positioning, reduces patient motion, and leads to improved imaging data yield and measurement accuracy. We present structural and angiographic OCT images of the anterior eye, demonstrating the unique imaging capabilities using representative scanning protocols which may be relevant to future research and clinical applications.

Evaluation of different OCT systems in quantitative imaging of human Schlemm's canal.

We examined the performance of human Schlemm's canal (SC) imaging using different OCT devices: CIRRUS 5000 (840 nm, spectral-domain (SD)-OCT), PLEX Elite 9000 (1060 nm, swept-source (SS)-OCT) and CASIA SS-1000 (1310 nm, SS-OCT), and analyzed potential impact factors on visualization and the quantitative assessment of SC morphology in a pilot study. Ten healthy subjects were imaged using three OCT devices by a single experienced operator on the same day. Each eye underwent two cubic scans by each device, one on nasal and the other on temporal quadrant. The B-scan showing the largest SC was manually selected for processing. Four quantitative metrics, including one morphological metric as cross-sectional area (CSA), and three performance metrics as contrast, continuity, and coverage, were derived from the datasets. Repeated-measures ANOVA was used to investigate the difference between these parameters from the three devices (P < 0.05). We found the CSA measured from CIRRUS was significantly larger than PLEX, followed by CASIA. The contrast was highest in CIRRUS, followed by PLEX and CASIA. The coverage was also higher in CIRRUS as compared to PLEX and CASIA. No significant difference was seen in the continuity from the three devices. In summary, we showed the measurements from the three devices were not interchangeable.

Polarization-sensitive optical coherence tomography monitoring of percutaneous radiofrequency ablation in left atrium of living swine.

Radiofrequency ablation (RFA) is commonly used to treat atrial fibrillation (AF). However, the outcome is often compromised due to the lack of direct real-time feedback to assess lesion transmurality. In this work, we evaluated the ability of polarization-sensitive optical coherence tomography (PSOCT) to measure cardiac wall thickness and assess RF lesion transmurality during left atrium (LA) RFA procedures. Quantitative transmural lesion criteria using PSOCT images were determined ex vivo using an integrated PSOCT-RFA catheter and fresh swine hearts. LA wall thickness of living swine was measured with PSOCT and validated with a micrometer after harvesting the heart. A total of 38 point lesions were created in the LA of 5 living swine with the integrated PSOCT-RFA catheter using standard clinical RFA procedures. For all lesions with analyzable PSOCT images, lesion transmurality was assessed with a sensitivity of 89% (17 of 19 tested positive) and a specificity of 100% (5 of 5 tested negative) using the quantitative transmural criteria. This is the first report of using PSOCT to assess LA RFA lesion transmurality in vivo. The results indicate that PSOCT may potentially provide direct real-time feedback for LA wall thickness and lesion transmurality.

In vivo human retinal swept source optical coherence tomography and angiography at 830 nm with a CMOS compatible photonic integrated circuit.

Photonic integrated circuits (PIC) provide promising functionalities to significantly reduce the size and costs of optical coherence tomography (OCT) systems. This paper presents an imaging platform operating at a center wavelength of 830 nm for ophthalmic application using PIC-based swept source OCT. An on-chip Mach-Zehnder interferometer (MZI) configuration, which comprises an input power splitter, polarization beam splitters in the sample and the reference arm, and a 50/50 coupler for signal interference represents the core element of the system with a footprint of only [Formula: see text]. The system achieves 94 dB imaging sensitivity with 750 [Formula: see text]W on the sample, 50 kHz imaging speed and 5.5 [Formula: see text]m axial resolution (in soft tissue). With this setup, in vivo human retinal imaging of healthy subjects was performed producing B-scans, three-dimensional renderings as well as OCT angiography. These promising results are significant prerequisites for further integration of optical and electronic building blocks on a single swept source-OCT PIC.

All-fiber probes for endoscopic optical coherence tomography of the large airways.

Endoscopic optical coherence tomography of large airways poses unique challenges. A hybrid lens is described that consists of a section of coreless fiber and graded index fiber (GIF), followed by a ball lens section. This design produces low numerical aperture beams better suited for large airway imaging. The performance of this lens is compared against conventional GIF and ball lens designs. Forward- and side-viewing probes were modeled, fabricated, and tested. The impact of a sheath on the beam profile was also investigated. Probes with working distances larger than 10 mm and depth-of-focus exceeding 12 mm are demonstrated with the proposed design.

Simultaneous directional full-field OCT using path-length and carrier multiplexing.

Full-field swept-source optical coherence tomography (FF-SS-OCT) is an emerging technology with potential applications in ophthalmic imaging, microscopy, metrology, and other domains. Here we demonstrate a novel method of multiplexing FF-SS-OCT signals using carrier modulation (CM). The principle of CM could be used to inspect various properties of the scattered light, e.g. its spectrum, polarization, Doppler shift, or distribution in the pupil. The last of these will be explored in this work, where CM was used to acquire images passing through two different optical pupils. The two pupils contained semicircular optical windows with perpendicular orientations, with each window permitting measurement of scattering anisotropy in one dimension by inducing an optical delay between the images formed by the two halves of the pupil. Together, the two forms of multiplexing permit measurement of differential scattering anisotropy in the x and y dimensions simultaneously. To demonstrate the feasibility of this technique our carrier multiplexed directional FF-OCT (CM-D-FF-OCT) system was used to acquire images of a microlens array, human hair, onion skin and in vivo human retina. The results of these studies are presented and briefly discussed in the context of future development and application of this technique.

Noise reduction by adaptive-SIN filtering for retinal OCT images.

Optical coherence tomography (OCT) images is widely used in ophthalmic examination, but their qualities are often affected by noises. Shearlet transform has shown its effectiveness in removing image noises because of its edge-preserving property and directional sensitivity. In the paper, we propose an adaptive denoising algorithm for OCT images. The OCT noise is closer to the Poisson distribution than the Gaussian distribution, and shearlet transform assumes additive white Gaussian noise. We hence propose a square-root transform to redistribute the OCT noise. Different manufacturers and differences between imaging objects may influence the observed noise characteristics, which make predefined thresholding scheme ineffective. We propose an adaptive 3D shearlet image filter with noise-redistribution (adaptive-SIN) scheme for OCT images. The proposed adaptive-SIN is evaluated on three benchmark datasets using quantitative evaluation metrics and subjective visual inspection. Compared with other algorithms, the proposed algorithm better removes noise in OCT images and better preserves image details, significantly outperforming in terms of both quantitative evaluation and visual inspection. The proposed algorithm effectively transforms the Poisson noise to Gaussian noise so that the subsequent shearlet transform could optimally remove the noise. The proposed adaptive thresholding scheme optimally adapts to various noise conditions and hence better remove the noise. The comparison experimental results on three benchmark datasets against 8 compared algorithms demonstrate the effectiveness of the proposed approach in removing OCT noise.