Sagittal morphometry of intervertebral spaces in subaxial cervical region of asymptomatic Chinese.

PURPOSE: This study aimed to quantify and evaluate morphology of intervertebral space between neighboring cervical units using radiographic imaging indices, to help spine surgeons when performing anterior cervical discectomy and fusion (ACDF) surgery on the Chinese population. METHODS: The background and imaging parameters of the subjects were assessed. Cervical lateral radiographs were employed to measure the intervertebral height (IH), intervertebral height index (IHI), and segmental lordosis (SL). Endplate parameters measurements were conducted on sagittal T2-weighted magnetic resonance imaging (MRI), including endplate sagittal diameter (ESD), and endplate concavity depth (ECD). All individuals were divided into three age groups: individuals aged 20-35 were in group A, individuals aged 36-50 were in group B, and individuals aged over 50 were in group C. A comparison of the variables was conducted among the three groups. Additionally, these radiographic parameters were also compared between males and females. RESULTS: A total of 102 individuals were included in this study. IH was greater at C6/7 than those at other segmental levels (p < 0.001). The largest SL values were found at C6/7, while the least were found at C3/4. The superior ESD (ESDs) and ECD (ECDs) of the intervertebral space were significantly greater than those of the inferior endplates (p < 0.05). The ESD and ECD values were the largest at C6/7, while the least at C3/4. Additionally, age and gender had an influence on several parameters. IH was significantly lower in group A compared to group B (p < 0.05) and group C (p < 0.05) from C3/4 level to C6/7 level. ECDs were lower in group A compared to group B (p < 0.05) and group C (p < 0.05) at each level. IH and ESD in males were generally significantly greater than those in females at all levels (p < 0.05). CONCLUSION: The current study found that C6/7 had the greatest IH, SL, ESD, and ECD values in asymptomatic Chinese. SL gradually increased from C3/4 to C6/7 levels. IH and ECD were significantly associated with age. Males had greater IH and ESD values than females. These findings provide baseline information for planning for selection of anterior screws and intervertebral implants.

Comparative analysis of deep-learning-based bone age estimation between whole lateral cephalometric and the cervical vertebral region in children.

Bone age determination in individuals is important for the diagnosis and treatment of growing children. This study aimed to develop a deep-learning model for bone age estimation using lateral cephalometric radiographs (LCRs) and regions of interest (ROIs) in growing children and evaluate its performance. This retrospective study included 1050 patients aged 4-18 years who underwent LCR and hand-wrist radiography on the same day at Pusan National University Dental Hospital and Ulsan University Hospital between January 2014 and June 2023. Two pretrained convolutional neural networks, InceptionResNet-v2 and NasNet-Large, were employed to develop a deep-learning model for bone age estimation. The LCRs and ROIs, which were designated as the cervical vertebrae areas, were labeled according to the patient's bone age. Bone age was collected from the same patient's hand-wrist radiograph. Deep-learning models trained with five-fold cross-validation were tested using internal and external validations. The LCR-trained model outperformed the ROI-trained models. In addition, visualization of each deep learning model using the gradient-weighted regression activation mapping technique revealed a difference in focus in bone age estimation. The findings of this comparative study are significant because they demonstrate the feasibility of bone age estimation via deep learning with craniofacial bones and dentition, in addition to the cervical vertebrae on the LCR of growing children.

Anatomical study of the C6 pedicle and lateral mass in children aged 0-14 years based on CT imaging.

OBJECTIVE: This study aims to investigate the anatomical structure of the C6 pedicle and lateral mass in children aged 0-14 years using CT imaging, providing detailed insights into their growth and development. METHODS: We conducted a comprehensive measurement of C6. Measurements included width, length, and height of the pedicles, as well as the length, width, and thickness of the lateral masses, and several angular metrics. Regression analysis was performed to understand the growth trends, and statistical analyses were carried out to identify differences between age groups, genders, and sides. RESULTS: In children younger than four years, the pedicle width exceeds its height, influencing the diameter of the pedicle screws. By age two to three, the pedicle height and lateral mass thickness reaches 3.0 mm, allowing for the use of 3.0 mm diameter screws. The pedicle transverse angle remains stable. Most parameters showed no significant differences between the left and right sides. Size parameters exhibited significant larger in males than females at ages 0-1, 3-7, and 10-12 years. Regression analysis revealed that the growth trends of size parameters follow cubic or polynomial curves. Most angular metrics follow cubic fitting curves without a clear trend of change with age. CONCLUSION: This study provides a detailed analysis of the anatomical development of the C6 pedicle and lateral masses in children, offering valuable insights for pediatric cervical spine surgeries. The findings highlight the importance of considering age-specific anatomical variations when planning posterior surgical fixation, specifically at C6. It is necessary for us to perform thin-layer CT scans on children and carefully measure various indicators before surgery.

Digital anatomical features of morphological development in C2-C7 neurocentral synchondrosis in children aged 1-6 years: a retrospective study of CT images.

BACKGROUND: With the continuous improvement of diagnosis and treatment technology for cervical spine-related diseases in children at home and abroad, the demand for exploring the developmental anatomy and function of children's cervical spine of different ages is increasing. So the aim of this study was to investigate the changes of anatomical indicators in neurocentral synchondrosis (NCS) of C2-C7 with age and the developmental characteristics of different vertebrae in children aged 1-6 years old. METHOD: A retrospective collection of 160 cases of normal cervical spine CT images of children aged 1-6 years old in provincial tertiary hospitals, according to the age group of 1-year-old into 6 groups. The original data of continuously scanned cervical spine tomography images were imported into Mimics16.0 software, under the two-dimensional image window, selected the measurement tool under the Measurements toolbar to measure and statistically analyzed the anatomical indicators such as cross diameter, sagittal diameter, height, perimeter and area of NCS in the C2-C7 segment of the cervical spine on the coronal plane and cross-section. RESULTS: There was no significant difference in the anatomical indexes of cervical spine NCS in children compared with the left and right sides of the same vertebrae (P > 0.05). The same cervical spine generally had differences between the age groups of 1-4 years old and 5-6 years old (P < 0.05).The transverse diameter and circumference gradually decreased with age; the sagittal diameter and height showed a slight increase trend; there was a maximum area at 2 years of age. In different cervical vertebrae of the same age group, the NCS values of C3, C4, and C5 varied greatly, which showed that the ossification process of cervical cartilage was faster than that at the upper and lower ends. There were obvious differences between C2 and the rest of the cervical vertebral segments' NCS ossification process. C7 was also very different from the rest of the cervical vertebrae segments, presumably more similar to the thoracic spine. CONCLUSIONS: The anatomical indexes of C2-C7 NCS in children have obvious developmental regularities at different ages, and there are also regularities between cervical segments.

Variations in Foramen Transversarium in Typical Cervical Vertebra / Variaciones del Foramen transverso en una Vértebra Cervical Típica

SUMMARY: In literature were described variations in foramen transversarium in cervical vertebrae, as well as their clinical importance, and the information about them boils down to the individual case reports or population morphological studies. The aim of this paper is to contribute to the knowledge of morphological characteristics of the transverse openings on vertebrae of the cervical region. The study was performed on 60 typical vertebrae that are part of the collection of the Department of Anatomy in Nis. The characteristics of permanent openings were measured and accessory foramina were recorded. It was found that the diameter of the openings on the left side was 5.595±0.92 x 5.390±1.507 mm, and on the right 5.766±1.201 x 6.101±1.401 mm. Unilateral completely separated accessory foramina were recorded in 10.17 % of cases, dominant on the left side, and incompletely separated cases in 5.09 %. The research has demonstrated a relatively high incidence of accessory foramina and deviations from circular shaped openings.

En la literatura se describen variaciones en el foramen transverso de las vértebras cervicales, así como su importancia clínica, y la información sobre ellas se reduce a informes de casos individuales o estudios morfológicos poblacionales. El objetivo de este trabajo fue contribuir al conocimiento de las características morfológicas de los forámenes transversos de las vértebras cervicales. El estudio se realizó en 60 vértebras típicas que forman parte de la colección del Departamento de Anatomía de Nis. Se midieron las características de los forámenes constantes y se registraron los forámenes accesorios. Se encontró que el diámetro de los forámenes del lado izquierdo era de 5,595±0,92 x 5,390±1,507 mm, y del derecho de 5,766±1,201 x 6,101±1,401 mm. Se registraron forámenes accesorios unilaterales completamente separados en el 10,17 % de los casos, dominantes en el lado izquierdo y casos incompletamente separados en el 5,09 %. La investigación ha demostrado una incidencia relativamente alta de forámenes accesorios y desviaciones de forma circular.

CT Anatomical Analysis of C4 Pedicle and Lateral Mass in Children Aged 0-14 in Southern China.

OBJECTIVE: The C4 is the transition point between the upper and lower cervical vertebrae and plays a pivotal role in the middle of the cervical spine. Currently, there are limited reports on large-scale sample studies regarding C4 anatomy in children, and a scarcity of experience exists in pediatric cervical spine surgery. The current study addresses the dearth of anatomical measurements of the C4 vertebral arch and lateral mass in a substantial sample of children. This study aims to measure the imaging anatomy of the C4 vertebral arch and lateral mass in children under 14 years of age across various age groups, investigate the growth and development of these structures. METHODS: We measured 12 indicators, including the size (D1, D2, D3, D4, D5, D6, D7, and D8) and angle (A, C, D, and E) of the C4 vertebral arch and lateral mass, in 513 children who underwent cervical CT examinations at our hospital. We employed the aggregate function for statistical analysis, conducted t-tests for difference statistics, and utilized the least squares method for regression analysis. RESULTS: Overall, as age increased, there was a gradual increase in the size of the vertebral arch and lateral mass. Additionally, the medial inclination angle of the vertebral arch decreased, and the lateral mass flattened gradually. The rate of change decreased gradually with age. The mean value of D1 increased from 2.31 mm to 3.88 mm, of D2 from 16.75 mm to 29.2 mm, of D3 from 2.21 mm to 4.92 mm, and of D4 from 7.34 mm to 11.84 mm. Meanwhile, the mean value of D5 increased from 5.2 mm to 9.71 mm, of D6 from 10.19 mm to 16.16 mm, of D7 from 2.53 mm to 5.67 mm, and of D8 from 6.11 mm to 11.45 mm. Angle A ranged from 49.12° to 54.97°, angle C from 15.28° to 19.83°, angle D from 39.91° to 53.7°, and angle E from 18.63° to 28.08°. CONCLUSION: Prior to cervical spine surgery in children, meticulous CT imaging anatomical measurements is essential. The imaging data serves as a reference for posterior C4 internal fixation, aids in designing posterior cervical screws for pediatric patients, and offer morphological anatomical references for posterior cervical spine surgery and screw design in pediatric patients.

Anatomical description of a new ligamentous supporting structure of the canine cranial cervical spinal cord.

The cranial cervical vertebral column carries a unique range of mobility with the addition of dorsal and ventral flexion and rotation. The denticulate ligaments provides support and protection of the spinal cord, but little is known of the adaption of this apparatus at the cranial cervical portion of the spinal cord. We present in this publication a new pair of ligaments in dogs that supports the spinal cord inside the vertebral canal at the level of the C1-C2 spinal segments.

From medical imaging to 3D printed anatomical models: a low-cost, affordable 3D printing approach.

OBJECTIVE: To share our experience in creating precise anatomical models using available open-source software. METHODS: An affordable method is presented, where from a DICOM format of a computed tomography, a segmentation of the region of interest is achieved. The image is then processed for surface improvement and the DICOM format is converted to STL. Error correction is achieved and the model is optimized to be printed by stereolithography with a desktop 3D printer. RESULTS: Precise measurements of the dimensions of the DICOM file (CT), the STL file, and the printed model (3D) were carried out. For the C6 vertebra, the dimensions of the horizontal axis were 55.3 mm (CT), 55.337 mm (STL), and 55.3183 mm (3D). The dimensions of the vertebral body were 14.2 mm (CT), 14.551 mm (STL), and 14.8159 mm (3D). The length of the spinous process was 18.2 mm (CT), 18.283 mm (STL), and 18.2266 mm (3D), while its width was 8.5 mm (CT), 8.3644 mm (STL), and 8.3226 mm (3D). For the C7 vertebra, the dimensions of the horizontal axis were 58.6 mm (CT), 58.739 mm (STL), and 58.7144 mm (3D). The dimensions of the vertebral body were 14 mm (CT), 14.0255 mm (STL), and 14.2312 mm (3D). The length of the spinous process was 18.7 mm (CT), 18.79 mm (STL), and 18.6458 mm (3D), and its width was 8.9 mm (CT), 8.988 mm (STL), and 8.9760 mm (3D). CONCLUSION: The printing of a 3D model of bone tissue using this algorithm is a viable, useful option with high precision.

OBJETIVO: Compartir nuestra experiencia para crear modelos anatómicos precisos utilizando software con licencia abierta disponibles. MÉTODOS: Se presenta un método asequible, en donde a partir de un formato DICOM de una tomografía computarizada se logra una segmentación de la región de interés. Posteriormente se procesa la imagen para una mejora de superficie y se realiza la conversión de formato DICOM a STL. Se logra la corrección de errores y se optimiza el modelo para luego ser impreso por medio de estereolitografía con una impresora 3D de escritorio. RESULTADOS: Se efectuaron mediciones precisas de las dimensiones del archivo DICOM (TC), del archivo STL y del modelo impreso (3D). Para la vértebra C6, las dimensiones del eje horizontal fueron 55.3 mm (TC), 55.337 mm (STL) y 55.3183 mm (3D). Las dimensiones del cuerpo vertebral fueron 14.2 mm (TC), 14.551 mm (STL) y 14.8159 mm (3D). La longitud de la apófisis espinosa fue de 18.2 mm (TC), 18.283 mm (STL) y 18.2266 mm (3D), mientras que su ancho fue de 8.5 mm (TC), 8.3644 mm (STL) y 8.3226 mm (3D). Para la vértebra C7, las dimensiones del eje horizontal fueron 58.6 mm (TC), 58.739 mm (STL) y 58.7144 mm (3D). Las dimensiones del cuerpo vertebral fueron 14 mm (TC), 14.0255 mm (STL) y 14.2312 mm (3D). La longitud de la apófisis espinosa fue de 18.7 mm (TC), 18.79 mm (STL) y 18.6458 mm (3D), y su ancho fue de 8.9 mm (TC), 8.988 mm (STL) y 8.9760 mm (3D). CONCLUSIÓN: La impresión de un modelo en 3D de tejido óseo mediante este algoritmo resulta una opción viable, útil y con una alta precisión.

The vertical topography of the carotid bifurcation - original study and review.

PURPOSE: The vertical level of carotid bifurcation (CB) is commonly indicated at the superior margin of the thyroid cartilage. Few studies observed the CB vertical topography. It was aimed at studying the vertical location of the CB as referred to vertebral and anterior cervical landmarks. METHODS: An archived lot of 147 computed tomography angiograms was documented for the vertical level of CB referred to vertebral and anterior cervical landmarks. The topography of the CB in relation to anterior landmarks was classified into seven types: (1) at the superior margin of the thyroid cartilage; (2) between the hyoid and the thyroid cartilage; (3) at the hyoid level; (4) between the hyoid and mandible; (5) subgonial or supragonial CB; (6) lower cervical level; (7) intrathoracic. RESULTS: The most common locations of CB were at C3 (27.21%), C3/C4 (26.19%) and C4 (25.51%). Bilateral symmetry of CB was found in 51.7%, except for C2 and C5/C6. Type 7 was not found, type 3 occurred in 39.12%, type 2 in 24.49%, type 1 in 13.95%, type 4 in 13.61%, type 5 in 6.12%, and type 6 in 2.72% (294 CBs). Bilateral symmetry of anterior types was found in 59.86%. Statistically significant correlations were found between sex and both left and right types and vertebral levels of CB. CONCLUSIONS: The vertical topography of the CB is highly variable and has sex-related specificity. This detail should be included in the teaching of anatomy. Surgeons and interventionists should better document the carotid anatomy on a case-by-case basis.

Anatomy and mobility in the adult cadaveric craniocervical junction.

Genetic diseases with craniofacial malformations can be associated with anomalies of the craniocervical joint (CCJ). The functions of the CCJ are thus impaired, as mobility may be either limited by abnormal bone fusion causing headaches, or exaggerated in the case of hypermobility, which may cause irreparable damage to the spinal cord. Restoring the balance between mobility and stability requires surgical correction in children. The anatomy and biomechanics of the CCJ are quite unique, yet have been overlooked in the past decades. Pediatric evidence is so scarce, that investigating the adult CCJ is our best shot to disentangle the form-function relationships of this anatomical region. The motivation of the present study was to understand the morphological and functional basis of motion in the CCJ, in the hope to find morphological features accessible from medical imaging able to predict mobility. To do so, we have quantified the in-vitro kinematics of the CCJ in nine cadaveric asymptomatic adults, and estimated a wide range of mobility variables covering the complexity of spinal motion. We compared these variables with the shape of the occipital, the atlas and the axis, obtained using a dense geometric morphometric approach. Morphological joint congruence was also quantified. Our results suggest a strong relationship between bone shape and motion, with the overall geometry predicting best the primary movements, and the joint facets predicting best the secondary movements. We propose a functional hypothesis stating that the musculoligamental system determines movements of great amplitude, while the shape and congruence of joint facets determine the secondary and coupled movements, especially by varying the geometry of bone stops and the way ligaments are tensioned. We believe this work will provide valuable insights in understanding the biomechanics of the CCJ. Furthermore, it should help surgeons treating CCJ anomalies by enabling them to translate objectives of functional and clinical outcome into clear objectives of morphological outcome.

The Late Cretaceous eutherian Zalambdalestes reveals unique axis and complex evolution of the mammalian neck.

The typical mammalian neck consisting of seven cervical vertebrae (C1-C7) was established by the Late Permian in the cynodont forerunners of modern mammals. This structure is precisely adapted to facilitate movements of the head during feeding, locomotion, predator evasion, and social interactions. Eutheria, the clade including crown placentals, has a fossil record extending back more than 125 million years revealing significant morphological diversification in the Mesozoic. Yet very little is known concerning the early evolution of eutherian cervical morphology and its functional adaptations. A specimen of Zalambdalestes lechei from the Late Cretaceous of Mongolia boasts exceptional preservation of an almost complete series of cervical vertebrae (C2-C7) revealing a highly modified axis (C2). The significance of this cervical morphology is explored utilizing an integrated approach combining comparative anatomical examination across mammals, muscle reconstruction, geometric morphometrics and virtual range of motion analysis. We compared the shape of the axis in Zalambdalestes to a dataset of 88 mammalian species (monotremes, marsupials, and placentals) using three-dimensional landmark analysis. The results indicate that the unique axis morphology of Zalambdalestes has no close analog among living mammals. Virtual range of motion analysis of the neck strongly implies Zalambdalestes was capable of exerting very forceful head movements and had a high degree of ventral flexion for an animal its size. These findings reveal unexpected complexity in the early evolution of the eutherian cervical morphology and suggest a feeding behavior similar to insectivores specialized in vermivory and defensive behaviors in Zalambdalestes akin to modern spiniferous mammals.

Morphometric Analysis of the Neural Arch of C2 Vertebra in Indian Population.

BACKGROUND AND OBJECTIVE: The most common injuries to upper cervical spine are fractures of the second cervical vertebrae. The study aims to evaluate the morphometry of the neural arch of the second cervical vertebrae in the South Indian population. MATERIALS AND METHODS: Sixty-three second cervical vertebrae of undetermined gender and age without any gross defect were used for the study. The dimensions of neural arch, including superior articular facet, inferior articular facet, pediculoisthmic component, lamina, spinous process, foramen transversarium, and vertebral foramen, were measured by two independent observers using digital vernier caliper accurate to 0.1 mm and the data was analyzed. Descriptive statistics were obtained for the variables. Paired t-test was done to compare the measurements between right and left sides. RESULTS: There was no statistical difference between the right and left sides of the dimensions of superior articular facets, foramen transversarium, and the transverse diameter of inferior articular facet. The anteroposterior diameter of the inferior articular facets was more on the right side (P = 0.009). The width of the pediculoisthmic component in both the superior and inferior aspects was found to be less on the right side than that of the left (P = 0.006 and P = 0.031, respectively). The thickness in the middle one-third of laminae was optimum for bilateral safe screw insertion (≥4.0 mm) in 77% specimens. CONCLUSION: In summary, measurements of the transverse diameter of superior articular facet and thickness of lamina differed significantly from those reported in literature. This should be kept in mind while doing neurosurgery procedures in the Indian population.

Cervical anatomy and its relation to foraging habits in aquatic birds (Aves: Neornithes: Neoaves).

Birds have extremely flexible necks, which help in their search for food. However, studies on the variation in bird cervical anatomy and its relationship with foraging are rare, despite the different habits presented between species. Here, we analyze the anatomy of the neck of aquatic birds and relate it to their foraging strategies. We dissected specimens representing four species of Charadriiformes, 11 species of Phaethoquornithes, and two specimens belonging to the outgroup Telluraves. We chose to emphasize Charadriiformes and Phaethoquornithes because they present several strategies that require cervical mobility and stability. We note that vertebral anatomy and dimensions vary, which affects the shape and size of the soft tissues attached throughout the neck. The synovial cartilage present in the articulatio intercorporalis represents an additional length in the neck, however, this is not longer than that observed in animals with intervertebral discs. Our analysis indicates that birds have a prevalence of dorsoventral movements in the middle of the neck and lateral and rotational movements near the base of the neck, while the region near the head presents a wide range of movement in all directions. Cervical ligaments and muscles throughout the neck provide stability in all segments, although the robustness of the soft tissues indicates that the most caudal portion of the neck is the most stable. The vertebral and soft tissue anatomy is consistent with the extensive mobility in pitching, yaw, and roll movements performed mainly by the head and first segment of the neck during the different foraging of the analyzed birds. Furthermore, the muscles closer to the skull are robust and allow the execution of a variety of habits to capture food in different species. The subsequent cervical segments present differences that explain their reduction in mobility, but they are equally stable.

Anatomical study with clinical significance of communicating and visceral branching of the cervical and upper thoracic sympathetic trunk.

Current advances in the management of the autonomic nervous system in various cardiovascular diseases, and in treatments for pain or sympathetic disturbances in the head, neck, or upper limbs, necessitate a thorough understanding of the anatomy of the cervicothoracic sympathetic trunk. Our objective was to enhance our understanding of the origin and distribution of communicating branches and visceral cervicothoracic sympathetic nerves in human fetuses. This was achieved through a comprehensive topographic systematization of the branching patterns observed in the cervical and upper thoracic ganglia, along with the distribution of communicating branches to each cervical spinal nerve. We conducted detailed sub-macroscopic dissections of the cervical and thoracic regions in 20 human fetuses (40 sides). The superior and cervicothoracic ganglia were identified as the cervical sympathetic ganglia that provided the most communicating branches on both sides. The middle and accessory cervical ganglia contributed the fewest branches, with no significant differences between the right and left sides. The cervicothoracic ganglion supplied sympathetic branches to the greatest number of spinal nerves, spanning from C5 to T2. The distribution of communicating branches to spinal nerves was non-uniform. Notably, C3, C4, and C5 received the fewest branches, and more than half of the specimens showed no sympathetic connections. C1 and C2 received sympathetic connections exclusively from the superior ganglion. Spinal nerves that received more branches often did so from multiple ganglia. The vertebral nerve provided deep communicating branches primarily to C6, with lesser contributions to C7, C5, and C8. The vagus nerve stood out as the cranial nerve with the most direct sympathetic connections. The autonomic branching pattern and connections of the cervicothoracic sympathetic trunk are significantly variable in the fetus. A comprehensive understanding of the anatomy of the cervical and upper thoracic sympathetic trunk and its branches is valuable during autonomic interventions and neuromodulation. This knowledge is particularly relevant for addressing various autonomic cardiac diseases and for treating pain and vascular dysfunction in the head, neck, and upper limbs.

Anatomy of the craniocervical junction - A review.

An in-depth understanding of the anatomy of the craniocervical junction (CCJ) is indispensable in skull base neurosurgery. In this paper, we discuss the osteology of the occipital bone, the atlas (C1) and axis (C2), the ligaments and the muscle anatomy of the CCJ region and their relationships with the vertebral artery. We will also discuss the trajectory of the vertebral artery and review the anatomy of the jugular foramen and lower cranial nerves (IX to XII). The most important surgical approaches to the CCJ, including the far lateral approach, the anterolateral approach of Bernard George and the endoscopic endonasal approach, will be discussed to review the surgical anatomy.

Magnetic resonance imaging-based classification of the myodural bridge complex and its influencing factors.

Cerebrospinal fluid (CSF) circulation is considered the third circulation of the human body. Recently, some scholars have proposed the myodural bridge (MDB) as a novel power source for CSF flow. Moreover, the suboccipital muscles can exert a driving force on the CSF via the MDB. This hypothesis is directly supported by head rotation and nodding movements, which can affect CSF circulation. The MDB has been validated as a normal structure in humans and mammals. In addition, the fusion of MDB fibers of different origins that act in concert with each other forms the MDB complex (MDBC). The MDBC may be associated with several CSF disorder-related neurological disorders in clinical practice. Therefore, the morphology of the MDBC and its influencing factors must be determined. In this study, T2-weighted imaging sagittal images of the cervical region were analyzed retrospectively in 1085 patients, and magnetic resonance imaging (MRI) typing of the MDBC was performed according to the imaging features of the MDBC in the posterior atlanto-occipital interspace (PAOiS) and posterior atlanto-axial interspace (PAAiS). The effects of age and age-related degenerative changes in the cervical spine on MRI staging of the MDBC were also determined. The results revealed four MRI types of the MDBC: type A (no MDBC hyposignal shadow connected to the dura mater in either the PAOiS or PAAiS), type B (MDBC hyposignal shadow connected to the dura mater in the PAOiS only), type C (MDBC hyposignal shadow connected to the dura mater in the PAAiS only), and type D (MDBC hyposignal shadow connected to the dura mater in both the PAOiS and PAAiS). The influencing factors for the MDBC typing were age (group), degree of intervertebral space stenosis, dorsal osteophytosis, and degenerative changes in the cervical spine (P < 0.05). With increasing age (10-year interval), the incidence of type B MDBC markedly decreased, whereas that of type A MDBC increased considerably. With the deepening of the degree of intervertebral space stenosis, the incidence of type C MDBC increased significantly, whereas that of type A MDBC decreased. In the presence of dorsal osteophytosis, the incidence of type C and D MDBCs significantly decreased, whereas that of type A increased. In the presence of protrusion of the intervertebral disc, the incidence of type B, C, and D MDBCs increased markedly, whereas that of type A MDBC decreased considerably, with cervical degenerative changes combined with spinal canal stenosis. Moreover, the incidence of both type C and D MDBCs increased, whereas that of type A MDBC decreased. Based on the MRI signal characteristics of the dural side of the MDBC, four types of the MDBC were identified. MDBC typing varies dynamically according to population distribution, depending on age and cervical degeneration (degree of intervertebral space stenosis, vertebral dorsal osteophytosis formation, simple protrusion of intervertebral disc, and cervical degeneration changes combined with spinal canal stenosis, except for the degree of protrusion of the intervertebral disc and the degree of spinal canal stenosis); however, it is not influenced by sex.

Computed Tomography-Based Morphometric Analysis of Lower Cervical Anterior Transpedicular Screw Fixation and Related Factors in the Chinese Population.

BACKGROUND: Anterior transpedicular screw (ATPS) internal fixation of the lower cervical spine is an alternative for patients who cannot tolerate combined anterior and posterior surgery. The cervical vertebral anatomy varies with many factors, including age, gender, height, weight, and race. METHODS: Three-dimensional (3D) CT reconstructions were performed on 122 patients. We selected the best level and measured the relevant parameters on both sides of the cervical vertebrae. RESULTS: We identified the entry point and orientation parameters of ATPS fixation for the C3-C7 vertebrae, and analyzed cervical pedicle parameters. Outer pedicle width (OPW), outer pedicle height (OPH), and pedicle axis length (PAL) were not correlated with body weight and age, but were positively correlated with body height (P < 0.05). After multiple linear regression analysis to exclude the effects of body height, no significant differences in OPW, OPH, and PAL were found between male and female subjects at most cervical levels. Pedicle cortical thickness was negatively correlated with age (P < 0.05). The percentage of pedicles with OPW <4.5 mm was: C3, 38.10%; C4, 34.92%; C5, 12.70%; C6, 9.52%; and C7, 0%. The percentage of pedicles with OPWs ≤4.5 mm, ≤4.0 mm, and ≤3.5 mm was higher among subjects with body height <160 cm. CONCLUSIONS: This study presents the internal anatomy of the cervical spine and provides accurate preoperative evaluation data for ATPS fixation. OPW, OPH, and PAL are positively correlated with body height, while pedicle cortical thickness is negatively correlated with age.

Reinterpretation of tuberculate cervical vertebrae of Eocene birds as an exceptional anti-predator adaptation against the mammalian craniocervical killing bite.

We report avian cervical vertebrae from the Quercy fissure fillings in France, which are densely covered with villi-like tubercles. Two of these vertebrae stem from a late Eocene site, another lacks exact stratigraphic data. Similar cervical vertebrae occur in avian species from Eocene fossils sites in Germany and the United Kingdom, but the new fossils are the only three-dimensionally preserved vertebrae with pronounced surface sculpturing. So far, the evolutionary significance of this highly bizarre morphology, which is unknown from extant birds, remained elusive, and even a pathological origin was considered. We note the occurrence of similar structures on the skull of the extant African rodent Lophiomys and detail that the tubercles represent true osteological features and characterize a distinctive clade of Eocene birds (Perplexicervicidae). Micro-computed tomography (µCT) shows the tubercles to be associated with osteosclerosis of the cervical vertebrae, which have a very thick cortex and much fewer trabecles and pneumatic spaces than the cervicals of most extant birds aside from some specialized divers. This unusual morphology is likely to have served for strengthening the vertebral spine in the neck region, and we hypothesize that it represents an anti-predator adaptation against the craniocervical killing bite ("neck bite") that evolved in some groups of mammalian predators. Tuberculate vertebrae are only known from the Eocene of Central Europe, which featured a low predation pressure on birds during that geological epoch, as is evidenced by high numbers of flightless avian species. Strengthening of the cranialmost neck vertebrae would have mitigated attacks by smaller predators with weak bite forces, and we interpret these vertebral specializations as the first evidence of "internal bony armor" in birds.

Study on articular surface morphology of atlantoaxial lateral mass based on differential manifold.

OBJECTIVES: To propose a surface reconstruction algorithm based on a differential manifold (a space with local Euclidean space properties), which can be used for processing of clinical images and for modeling of the atlantoaxial joint. To describe the ideal anatomy of the lateral atlantoaxial articular surface by measuring the anatomical data. METHODS: Computed tomography data of 80 healthy subjects who underwent cervical spine examinations at our institution were collected between October 2019 and June 2022, including 46 males and 34 females, aged 37.8 ± 5.1 years (28-59 years). A differential manifold surface reconstruction algorithm was used to generate the model based on DICOM data derived by Vision PACS system. The lateral mass articular surface was measured and compared in terms of its sagittal diameter, transverse diameter, articular surface area, articular curvature and joint space height. RESULTS: There was no statistically significant difference between left and right sides of the measured data in normal adults (P > 0.05). The atlantoaxial articular surface sagittal diameter length was (15.83 ± 1.85) and (16.22 ± 1.57) mm on average, respectively. The transverse diameter length of the articular surface was (16.29 ± 2.16) and (16.49 ± 1.84) mm. The lateral articular surface area was (166.53 ± 7.69) and (174.48 ± 6.73) mm2 and the curvature was (164.03 ± 5.27) and (153.23 ± 9.03)°, respectively. The joint space height was 3.05 ± 0.11mm, respectively. There is an irregular articular space in the lateral mass of atlantoaxial, and both upper and lower surfaces of the articular space are concave. A sagittal plane view shows that the inferior articular surface of the atlas is mainly concave above; however, the superior articular surface of the axis is mainly convex above. In the coronal plane, the inferior articular surface of the atlas is mostly concave above, with most concave vertices located in the medial region, and the superior articular surface of the axis is mainly concave below, with most convex vertices located centrally and laterally. CONCLUSION: A differential manifold algorithm can effectively process atlantoaxial imaging data, fit and control mesh topology, and reconstruct curved surfaces to meet clinical measurement applications with high accuracy and efficiency; the articular surface of the lateral mass of atlantoaxial mass in normal adults has relatively constant sagittal diameter, transverse diameter and area. The distance difference between joint spaces is small, but the shape difference of articular surfaces differs greatly.

A novel radiographic analysis system for subaxial cervical spine pedicle screw placement.

BACKGROUND: Precise pedicle screw placement of the subaxial cervical spine is difficult. Not every hospital is equipped with a guidance system that can provide effective help. Computed tomography (CT) scanning is almost a routine preoperative examination for cervical spine surgery in all hospitals. Appropriate measurement and analysis of the CT images could assist optimal cervical pedicle screw placement. The purpose of this study is to propose a new and universal method using computed tomography (CT) morphological parameters analysis to assist optimal cervical pedicle screw placement from C3 to C7. METHODS: A localization system with six parameters was designed based on preoperative CT reconstruction to guide subaxial cervical spine pedicle screw placement. The six parameters were distance from the starting point to the midline [D1], distance from the starting point to the lower edge of the inferior articular process [D2], transverse section angle [TSA], sagittal section angle [SSA], pedicle width [PW], and pedicle height [PH]. The six parameters were analyzed in 53 participants. RESULTS: Combining D1 and D2 could localize the entrance of the pedicle screw, and we concluded that D1 and TSA and D2 and SSA could be a new standard for determination of the transverse and sagittal orientation of the pedicle screw. The six parameters were closely related to the patient's gender, height, and weight. PH and PW were linearly correlated and could guide selection of the appropriate pedicle screw. SSA was an independent parameter of the relevant vertebral body, and changes in SSA had nothing to do with the curvature or posture of the cervical spine. CONCLUSIONS: Understanding and applying the six-parameter localization system are essential for achieving accurate and optimal pedicle screw placement in subaxial cervical spine, regardless of cervical sagittal alignment.