Bio-oil deoxygenation by catalytic pyrolysis: new catalysts for the conversion of biomass into densified and deoxygenated bio-oil.
ChemSusChem
; 5(10): 1944-57, 2012 Oct.
Article
en En
| MEDLINE
| ID: mdl-22899352
ABSTRACT
This work proposes an innovative catalytic pyrolysis process that converts bio-refinery residues, such as spent grains, into intermediate bio-oil with improved properties compared to traditional bio-oils, which allows the use of existing crude-oil refinery settings for bio-oil upgrading into fuels. The integration of bio-oil into a crude-oil refinery would decrease the economic disadvantage of biomass compared to fossil fuels. The catalytic pyrolysis was able to produce bio-oil with a lower O and N content and high levels of aliphatics and H by using activated serpentine and olivine at 430-460 °C. The activated materials seem to be beneficial to the bio-oil energy content by increasing it from less than 20 MJ kg(-1) in the original biomass to 26 MJ kg(-1). Approximately 70-74 % of the starting energy remains in the bio-oil using activated olivine (ACOL) and activated serpentine (ACSE) at 430 °C, whereas only 52 % is retained using alumina (ALU) at the same temperature. There was a strong reduction of the O content in the bio-oils, and the deoxygenation power decreased in the following order ACOL>ACSE>ALU. In particular, ACOL at 430-460 °C was able to reduce the O content of the bio-oil by 40 %. The oxygenated bio-oil macromolecules interact in the catalyst's active sites with the naturally present metallic species and undergo decarboxylation with the formation of C(5)-C(6) O-depleted species.
Texto completo:
1
Base de datos:
MEDLINE
Asunto principal:
Oxígeno
/
Temperatura
/
Biomasa
/
Biocombustibles
Idioma:
En
Revista:
ChemSusChem
Asunto de la revista:
QUIMICA
/
TOXICOLOGIA
Año:
2012
Tipo del documento:
Article