Response characteristics of MAPbBr3 direct conversion X-ray detectors based on measurements and Monte Carlo simulation.

ABSTRACT

In recent years, higher requirements have been placed on the response characteristics of X-ray detectors in the field of medical diagnostic imaging. Due to this, high sensitivity, high attenuation coefficient and low cost detection materials need to be developed. In this paper, the geometric model of a detector was established by Geant4 code. The absorption efficiency and mass attenuation coefficient of MAPbBr3 crystals were calculated in the energy range of 30 keV to 100 keV. Compared with the mass attenuation coefficient of the NIST database, the deviation was within 1.39%. The signal charge number and detection sensitivity of the X-ray interaction with the MAPbBr3 crystal ware calculated. Compared with the CdTe crystal and α-Se, the MAPbBr3 crystal still had a larger detection sensitivity under a smaller applied electric field, which was approximately 9 times higher than that of α-Se. This result indicated that the detection sensitivity could be greatly improved by using a high atomic number and high charge mobility-lifetime product. Based on the simulation results, the 2 mm thick MAPbBr3 crystal exhibited the highest detection sensitivity at 60 keV X-rays, which was in agreement with the experimental results.