Techno-economic assessment of bioleaching for metallurgical by-products.
J Environ Manage
; 358: 120904, 2024 May.
Article
en En
| MEDLINE
| ID: mdl-38643624
ABSTRACT
This study focused on the economic feasibility of two potential industrial-scale bioleaching technologies for metal recovery from specific metallurgical by-products, mainly basic oxygen steelmaking dust (BOS-D) and goethite. The investigation compared two bioleaching scaling technology configurations, including an aerated bioreactor and an aerated and stirred bioreactor across different scenarios. Results indicated that bioleaching using Acidithiobacillus ferrooxidans proved financially viable for copper extraction from goethite, particularly when 5% and 10% pulp densities were used in the aerated bioreactor, and when 10% pulp density was used in the aerated and stirred bioreactor. Notably, a net present value (NPV) of $1,275,499k and an internal rate of return (IRR) of 65% for Cu recovery from goethite were achieved over 20-years after project started using the aerated and stirred bioreactor plant with a capital expenditure (CAPEX) of $119,816,550 and an operational expenditure (OPEX) of $5,896,580/year. It is expected that plant will start to make profit after one year of operation. Aerated and stirred bioreactor plant appeared more reliable alternative compared to the aerated bioreactor plant as the plant consists of 12 reactors which can allow better management and operation in small volume with multiple reactors. Despite the limitations, this techno-economic assessment emphasized the significance of selective metal recovery and plant design, and underscored the major expenses associated with the process.
Palabras clave
Texto completo:
1
Base de datos:
MEDLINE
Asunto principal:
Reactores Biológicos
/
Acidithiobacillus
/
Metalurgia
Idioma:
En
Revista:
J Environ Manage
/
J. environ. manag
/
Journal of environmental management
Año:
2024
Tipo del documento:
Article