An advanced biphasic porous and injectable scaffold displays a fine balance between mechanical strength and remodeling capabilities essential for cartilage regeneration.

An important challenge in tissue engineering is the regeneration of functional articular cartilage (AC). In the field, biomimetic hydrogels are being extensively studied as scaffolds that recapitulate microenvironmental features or as mechanical supports for transplanted cells. New advanced hydrogel formulations based on salmon methacrylate gelatin (sGelMA), a cold-adapted biomaterial, are presented in this work. The psychrophilic nature of this biomaterial provides rheological advantages allowing the fabrication of scaffolds with high concentrations of the biopolymer and high mechanical strength, suitable for formulating injectable hydrogels with high mechanical strength for cartilage regeneration. However, highly intricate cell-laden scaffolds derived from highly concentrated sGelMA solutions could be deleterious for cells and scaffold remodeling. On this account, the current study proposes the use of sGelMA supplemented with a mesophilic sacrificial porogenic component. The cytocompatibility of different sGelMA-based formulations is tested through the encapsulation of osteoarthritic chondrocytes (OACs) and stimulated to synthesize extracellular matrix (ECM) components in vitro and in vivo. The sGelMA-derived scaffolds reach high levels of stiffness, and the inclusion of porogens impacts positively the scaffold degradability and molecular diffusion, improved fitness of OACs, increased the expression of cartilage-related genes, increased glycosaminoglycan (GAG) synthesis, and improved remodeling toward cartilage-like tissues. Altogether, these data support the use of sGelMA solutions in combination with mammalian solid gelatin beads for highly injectable formulations for cartilage regeneration, strengthening the importance of the balance between mechanical properties and remodeling capabilities.

A novel porous hydrogel based on hybrid gelation for injectable and tough scaffold implantation and tissue engineering applications.

Although there have been many advances in injectable hydrogels as scaffolds for tissue engineering or as payload-containing vehicles, the lack of adequate microporosity for the desired cell behavior, tissue integration, and successful tissue generation remains an important drawback. Herein, we describe an effective porous injectable system that allowsin vivoformation of pores through conventional syringe injection at room temperature. This system is based on the differential melting profiles of photocrosslinkable salmon gelatin and physically crosslinked porogens of porcine gelatin (PG), in which PG porogens are solid beads, while salmon methacrylamide gelatin remains liquid during the injection procedure. After injection and photocrosslinking, the porogens were degraded in response to the physiological temperature, enabling the generation of a homogeneous porous structure within the hydrogel. The resultant porogen-containing formulations exhibited controlled gelation kinetics within a broad temperature window (18.5 ± 0.5-28.8 ± 0.8 °C), low viscosity (133 ± 1.4-188 ± 16 cP), low force requirements for injectability (17 ± 0.3-39 ± 1 N), robust mechanical properties after photo-crosslinking (100.9 ± 3.4-332 ± 13.2 kPa), and favorable cytocompatibility (>70% cell viability). Remarkably,in vivosubcutaneous injection demonstrated the suitability of the system with appropriate viscosity and swift crosslinking to generate porous hydrogels. The resulting injected porous constructs showed favorable biocompatibility and facilitated cell infiltration for desirable potential tissue remodeling. Finally, the porogen-containing formulations exhibited favorable handling, easy deposition, and good shape fidelity when used as bioinks in 3D bioprinting technology. This injectable porous system serves as a platform for various biomedical applications, thereby inspiring future advances in cell therapy and tissue engineering.

Cold-adaptation of a methacrylamide gelatin towards the expansion of the biomaterial toolbox for specialized functionalities in tissue engineering.

Tissue regeneration is witnessing a significant surge in advanced medicine. It requires the interaction of scaffolds with different cell types for efficient tissue formation post-implantation. The presence of tissue subtypes in more complex organs demands the co-existence of different biomaterials showing different hydrolysis rate for specialized cell-dependent remodeling. To expand the available toolbox of biomaterials with sufficient mechanical strength and variable rate of enzymatic degradation, a cold-adapted methacrylamide gelatin was developed from salmon skin. Compared with mammalian methacrylamide gelatin (GelMA), hydrogels derived from salmon GelMA displayed similar mechanical properties than the former. Nevertheless, salmon gelatin and salmon GelMA-derived hydrogels presented characteristics common of cold-adaptation, such as reduced activation energy for collagenase, increased enzymatic hydrolysis turnover of hydrogels, increased interconnected polypeptides molecular mobility and lower physical gelation capability. These properties resulted in increased cell-remodeling rate in vitro and in vivo, proving the potential and biological tolerance of this mechanically adequate cold-adapted biomaterial as alternative scaffold subtypes with improved cell invasion and tissue fusion capacity.

Layer-by-layer approach for a uniformed fabrication of a cell patterned vessel-like construct.

Successful tissue engineered small diameter blood vessels (SDBV) require manufacturing systems capable of precisely controlling different key elements, such as material composition, geometry and spatial location of specialized biomaterials and cells types. We report in this work an automated methodology that enables the manufacture of multilayer cylindrical constructs for SDBV fabrication that uses a layer-by-layer deposition approach while controlling variables such as dipping and spinning speed of a rod and biomaterial viscosity. Different biomaterials including methacrylated gelatin, alginate and chitosan were tested using this procedure to build different parts of the constructs. The system was capable of controlling dimensions of lumen from 0.5 mm up to 6 mm diameter and individual layers from 1 µm up to 400 µm thick. A cellular component was successfully added to the biomaterial in the absence of significant cytotoxic effect which was assessed by viability and proliferation assays. Additionally, cells showed a homogenous distribution with well-defined concentric patterns across the multilayer vessel grafts. The challenging generation of inner endothelial cells of approximately 20-30 µm of thickness was achieved. Preliminary experimental evidences of microstructural alignment of the biomaterial were obtained when the dipping approach was combined with the rod rotation. The study demonstrated the wide versatility and scalability of the automated system to easily and rapidly fabricate complex cellularized multilayer vascular grafts with structural configuration that resembles natural blood vessels.