Preparation of Well-Defined Fluorescent Nanoplastic Particles by Confined Impinging Jet Mixing.

Research on the origin, distribution, detection, identification, and quantification of polymer nanoparticles (NPs) in the environment and their possible impact on animal and human health is surging. For different types of studies in this field, well-defined reference materials or mimics are needed. While isolated reports on the preparation of such materials are available, a simple and broadly applicable method that allows for the production of different NP types with well-defined, tailorable characteristics is still missing. Here, we demonstrate that a confined impinging jet mixing process can be used to prepare colloidally stable NPs based on polystyrene, polyethylene, polypropylene, and poly(ethylene terephthalate) with diameters below < 100 nm. Different fluorophores were incorporated into the NPs, to allow their detection in complex environments. To demonstrate their utility and detectability, fluorescent NPs were exposed to J774A.1 macrophages and visualized using laser scanning microscopy. Furthermore, we modified the NPs in a postfabrication process and changed their shape from spherical to heterogeneous geometries, in order to mimic environmentally relevant morphologies. The methodology used here should be readily applicable to other polymers and payloads and thus a broad range of NPs that enable studies of their behavior, uptake, translocation, and biological end points in different systems.

Liquid Crystalline Properties of Symmetric and Asymmetric End-Grafted Cellulose Nanocrystals.

The hydrophilic polymer poly[2-(2-(2-methoxy ethoxy)ethoxy)ethylacrylate] (POEG3A) was grafted onto the reducing end-groups (REGs) of cellulose nanocrystal (CNC) allomorphs, and their liquid crystalline properties were investigated. The REGs on CNCs extracted from cellulose I (CNC-I) are exclusively located at one end of the crystallite, whereas CNCs extracted from cellulose II (CNC-II) feature REGs at both ends of the crystallite, so that grafting from the REGs affords asymmetrically and symmetrically decorated CNCs, respectively. To confirm the REG modification, several complementary analytical techniques were applied. The grafting of POEG3A onto the CNC REGs was evidenced by Fourier transform infrared spectroscopy, atomic force microscopy, and the coil-globule conformational transition of this polymer above 60 °C, i.e., its lower critical solution temperature. Furthermore, we investigated the self-assembly of end-tethered CNC-hybrids into chiral nematic liquid crystalline phases. Above a critical concentration, both end-grafted CNC allomorphs form chiral nematic tactoids. The introduction of POEG3A to CNC-I does not disturb the surface of the CNCs along the rods, allowing the modified CNCs to approach each other and form helicoidal textures. End-grafted CNC-II formed chiral nematic tactoids with a pitch observable by polarized optical microscopy. This is likely due to their increase in hydrodynamic radius or the introduced steric stabilization of the end-grafted polymer.

Nanostructural Properties and Twist Periodicity of Cellulose Nanofibrils with Variable Charge Density.

Cellulose nanofibrils (CNFs) are a renewable and facile to produce nanomaterial that recently gained a lot of attention in soft material research. The nanostructural properties of the fibrils largely determine their self-organizing functionalities, and the ability to tune the CNF nanostructure through control of the processing parameters is therefore crucial for developing new applications. In this study, we systematically altered the CNF production parameters (i.e., variation in cellulose source, chemical, and mechanical treatment) to observe their impact on the nanostructural properties of the resulting fibrils. Atomic force microscopy (AFM) allowed detailed topological examination of individual CNFs to elucidate fibril properties such as contour length, kink distribution and the right-handed twist periodicity of individual fibrils. Statistical analysis revealed a large dependency of the fibril properties on the industrial treatment of the cellulose source material. Our results furthermore confirm that the average charge density of the fibrils regulates both contour length and twist periodicity and, thus, has a very strong impact on the final morphology of CNFs. These results provide a route to tune the detailed nanostructure of CNFs with potential impact on the self-organization of these biological colloids and their optimal use in new nanomaterials.

Selective and Efficient Removal of Fluoride from Water: In Situ Engineered Amyloid Fibril/ZrO2 Hybrid Membranes.

We report a new strategy for efficient removal of F- from contaminated water streams, and it relies on carbon hybrid membranes made of amyloid fibril/ZrO2 nanoparticles (<10 nm). These membranes exhibit superior selectivity for F- against various competitive ions, with a distribution coefficient (Kd ) as high as 6820 mL g-1 , exceeding commercial ion-exchange resins (IRA-900) by 180 times and outdoing the performance of most commercial carbon-activated aluminum membranes. At both low and high (ca. 200 mg L-1 ) F- concentrations, the membrane efficiency exceeds 99.5 % removal. For real untreated municipal tap water (ca. 2.8 mg L-1 ) under continuous operating mode, data indicates that about 1750 kg water m-2 membrane can be treated while maintaining drinking water quality, and the saturated membranes can be regenerated and reused several times without decrease in performance. This technology is promising for mitigating the problem of fluoride water contamination worldwide.

Squid Suckerin Biomimetic Peptides Form Amyloid-like Crystals with Robust Mechanical Properties.

We present the self-assembly of fibers formed from a peptide sequence (A1H1) derived from suckerin proteins of squid sucker ring teeth (SRT). SRT are protein-only biopolymers with an unconventional set of physicochemical and mechanical properties including high elastic modulus coupled with thermoplastic behavior. We have identified a conserved peptide building block from suckerins that possess the ability to assemble into materials with similar mechanical properties as the native SRT. A1H1 displays amphiphilic characteristics and self-assembles from the bottom-up into mm-scale fibers initiated by the addition of a polar aprotic solvent. A1H1 fibers are thermally resistant up to 239 °C, coupled with an elastic modulus of ∼7.7 GPa, which can be explained by the tight packing of ß-sheet-enriched crystalline building blocks as identified by wide-angle X-ray scattering (WAXS), with intersheet and interstrand distances of 5.37 and 4.38 Å, respectively. A compact packing of the peptides at their Ala-rich terminals within the fibers was confirmed from molecular dynamics simulations, and we propose a hierarchical model of fiber assembly of the mature peptide fiber.

Hybrid Amyloid Membranes for Continuous Flow Catalysis.

Amyloid fibrils are promising nanomaterials for technological applications such as biosensors, tissue engineering, drug delivery, and optoelectronics. Here we show that amyloid-metal nanoparticle hybrids can be used both as efficient active materials for wet catalysis and as membranes for continuous flow catalysis applications. Initially, amyloid fibrils generated in vitro from the nontoxic ß-lactoglobulin protein act as templates for the synthesis of gold and palladium metal nanoparticles from salt precursors. The resulting hybrids possess catalytic features as demonstrated by evaluating their activity in a model catalytic reaction in water, e.g., the reduction of 4-nitrophenol into 4-aminophenol, with the rate constant of the reduction increasing with the concentration of amyloid-nanoparticle hybrids. Importantly, the same nanoparticles adsorbed onto fibrils surface show improved catalytic efficiency compared to the same unattached particles, pointing at the important role played by the amyloid fibril templates. Then, filter membranes are prepared from the metal nanoparticle-decorated amyloid fibrils by vacuum filtration. The resulting membranes serve as efficient flow catalysis active materials, with a complete catalytic conversion achieved within a single flow passage of a feeding solution through the membrane.

Unravelling secondary structure changes on individual anionic polysaccharide chains by atomic force microscopy.

The structural conformations of the anionic carrageenan polysaccharides in the presence of monovalent salt close to physiological conditions are studied by atomic force microscopy. Iota-carrageenan undergoes a coil-helix transition at high ionic strength, whereas lambda-carrageenan remains in the coiled state. Polymer statistical analysis reveals an increase in persistence length from 22.6±0.2 nm in the random coil, to 26.4±0.2 nm in the ordered helical conformation, indicating an increased rigidity of the helical iota-carrageenan chains. The many decades-long debated issue on whether the ordered state can exist as single or double helix, is conclusively resolved by demonstrating the existence of a unimeric helix formed intramolecularly by a single polymer chain.

Structure and enzymatic properties of molecular dendronized polymer-enzyme conjugates and their entrapment inside giant vesicles.

Macromolecular hybrid structures were prepared in which two types of enzymes, horseradish peroxidase (HRP) and bovine erythrocytes Cu,Zn-superoxide dismutase (SOD), were linked to a fluorescently labeled, polycationic, dendronized polymer (denpol). Two homologous denpols of first and second generation were used and compared, and the activities of HRP and SOD of the conjugates were measured in aqueous solution separately and in combination. In the latter case the efficiency of the two enzymes in catalyzing a two-step cascade reaction was evaluated. Both enzymes in the two types of conjugates were highly active and comparable to free enzymes, although the efficiency of the enzymes bound to the second-generation denpol was significantly lower (up to a factor of 2) than the efficiency of HRP and SOD linked to the first-generation denpol. Both conjugates were analyzed by atomic force microscopy (AFM), confirming the expected increase in object size compared to free denpols and demonstrating the presence of enzyme molecules localized along the denpol chains. Finally, giant phospholipid vesicles with diameters of up to about 20 µm containing in their aqueous interior pool a first-generation denpol-HRP conjugate were prepared. The HRP of the entrapped conjugate was shown to remain active toward externally added, membrane-permeable substrates, an important prerequisite for the development of vesicular multienzyme reaction systems.

Engineering of biofilms with a glycosylation circuit for biomaterial applications.

Glycosylation is a crucial post-translational modification for a wide range of functionalities. Adhesive protein-based biomaterials in nature rely on heavily glycosylated proteins such as spider silk and mussel adhesive proteins. Engineering protein-based biomaterials genetically enables desired functions and characteristics. Additionally, utilization of glycosylation for biomaterial engineering can expand possibilities by including saccharides to the inventory of building blocks. Here, de novo glycosylation of Bacillus subtilis amyloid-like biofilm protein TasA using a Campylobacter jejuni glycosylation circuit is proposed to be a novel biomaterial engineering method for increasing adhesiveness of TasA fibrils. A C. jejuni glycosylation motif is genetically incorporated to tasA gene and expressed in Escherichia coli containing the C. jejuni pgl protein glycosylation pathway. Glycosylated TasA fibrils indicate enhanced adsorption on the gold surface without disruption of fibril formation. Our findings suggest that N-linked glycosylation can be a promising tool for engineering protein-based biomaterials specifically regarding adhesion.

Controlling Supramolecular Chiral Nanostructures by Self-Assembly of a Biomimetic ß-Sheet-Rich Amyloidogenic Peptide.

Squid sucker ring teeth (SRT) have emerged as a promising protein-only, thermoplastic biopolymer with an increasing number of biomedical and engineering applications demonstrated in recent years. SRT is a supra-molecular network whereby a flexible, amorphous matrix is mechanically reinforced by nanoconfined ß-sheets. The building blocks for the SRT network are a family of suckerin proteins that share a common block copolymer architecture consisting of amorphous domains intervened by smaller, ß-sheet forming modules. Recent studies have identified the peptide A1H1 (peptide sequence AATAVSHTTHHA) as one of the most abundant ß-sheet forming domains within the suckerin protein family. However, we still have little understanding of the assembly mechanisms by which the A1H1 peptide may assemble into its functional load-bearing domains. In this study, we conduct a detailed self-assembly study of A1H1 and show that the peptide undergoes ß-strands-driven elongation into amyloid-like fibrils with a rich polymorphism. The nanostructure of the fibrils was elucidated by small and wide-angle X-ray scattering (SAXS and WAXS) and atomic force microscopy (AFM). The presence of His-rich and Ala-rich segments results in an amphiphilic behavior and drives its assembly into fibrillar supramolecular chiral aggregates with helical ribbon configuration in solution, with the His-rich region exposed to the solvent molecules. Upon increase in concentration, the fibrils undergo gel formation, while preserving the same mesoscopic features. This complex phase behavior suggests that the repeat peptide modules of suckerins may be manipulated beyond their native biological environment to produce a wider variety of self-assembled amyloid-like nanostructures.

Biophotonics of Native Silk Fibrils.

Native silk fibroin (NSF) is a unique biomaterial with extraordinary mechanical and biochemical properties. These key characteristics are directly associated with the physical transformation of unstructured, soluble NSF into highly organized nano- and microscale fibrils rich in ß-sheet content. Here, it is shown that this NSF fibrillation process is accompanied by the development of intrinsic fluorescence in the visible range, upon near-UV excitation, a phenomenon that has not been investigated in detail to date. Here, the optical and fluorescence characteristics of NSF fibrils are probed and a route for potential applications in the field of self-assembled optically active biomaterials and systems is explored. In particular, it is demonstrated that NSF can be structured into autofluorescent microcapsules with a controllable level of ß-sheet content and fluorescence properties. Furthermore, a facile and efficient fabrication route that permits arbitrary patterns of NSF microcapsules to be deposited on substrates under ambient conditions is shown. The resulting fluorescent NSF patterns display a high level of photostability. These results demonstrate the potential of using native silk as a new class of biocompatible photonic material.

Modulating materials by orthogonally oriented ß-strands: composites of amyloid and silk fibroin fibrils.

Amyloid fibrils and silk fibroin (SF) fibrils are proteinaceous aggregates occurring either naturally or as artificially reconstituted fibrous systems, in which the constituent ß-strands are aligned either orthogonally or parallel to the fibril main axis, conferring complementary physical properties. Here, it is shown how the combination of these two classes of protein fibrils with orthogonally oriented ß-strands results in composite materials with controllable physical properties at the molecular, mesoscopic, and continuum length scales.

Polymorphism complexity and handedness inversion in serum albumin amyloid fibrils.

Protein-based amyloid fibrils can show a great variety of polymorphic structures within the same protein precursor, although the origins of these structural homologues remain poorly understood. In this work we investigate the fibrillation of bovine serum albumin--a model globular protein--and we follow the polymorphic evolution by a statistical analysis of high-resolution atomic force microscopy images, complemented, at larger length scales, by concepts based on polymer physics formalism. We identify six distinct classes of coexisting amyloid fibrils, including flexible left-handed twisted ribbons, rigid right-handed helical ribbons and nanotubes. We show that the rigid fibrils originate from flexible fibrils through two diverse polymorphic transitions, first, via a single-fibril transformation when the flexible left-handed twisted ribbons turn into the helical left-handed ribbons, to finally evolve into nanotube-like structures, and second, via a double-fibril transformation when two flexible left-handed twisted ribbons wind together resulting in a right-handed twisted ribbon, followed by a rigid right-handed helical ribbon polymorphic conformation. Hence, the change in handedness occurs with an increase in the level of the fibril's structural organization.

Twofold pH and temperature stimuli-responsive behaviour in block copolypeptide-decorated single wall carbon nanotubes.

Temperature- and pH-responsive dispersions of carbon nanotubes in water have been obtained by using di- and tri-block copolypeptides, in which the temperature responsive behaviour is provided by a poly(N-isopropylacrylamide) block, while the pH responsiveness is provided by two different polypeptides with an ampholytic behaviour, poly(L-glutamic acid) and poly(L-lysine). The molecular architectures of the block copolypeptides can be engineered to fine-tune the stimuli-responsive behaviour.

New biocompatible thermo-reversible hydrogels from PNiPAM-decorated amyloid fibrils.

New biocompatible temperature-responsive hydrogels have been obtained by using unprecedented low concentration of amyloid fibril-PNiPAM hybrids. The viscoelasticity of the hydrogels can be finely controlled by tuning the PNiPAM layers without changing the structure or concentration of the amyloid fibrils.