Polyethylene glycol embedded reduced graphene oxide supramolecular assemblies for enhanced room-temperature gas sensors.

Herein, we present the gas-dependent electrical properties of a reduced graphene oxide nanocomposite. The reduced graphene oxide (rGO) was synthesized by reducing GO with sodium borohydride (NaBH4). As-synthesized rGO was dispersed in DI water containing 1, 2, 3, 4, and 5 wt% polyethylene glycol (PEG) to prepare PEG-rGO supramolecular assemblies. The successful preparation of supramolecular assemblies was verified by their characterization using XRD, FESEM, EDS, TEM, FTIR, and Raman spectroscopy. At room temperature, the gas-dependent electrical properties of these supramolecular assemblies were investigated. The results showed that sensors composed of PEG-rGO supramolecular assemblies performed better against benzene and methanol at 3% and 4% PEG, respectively. However, high selectivity and a wide range of activation energies (∼1.64-1.91 eV) were observed for H2 gas for 4% PEG-modified supramolecular assemblies. The PEG-rGO supramolecular assemblies may be an excellent candidate for constructing ultrahigh-performance gas sensors for a variety of applications due to their high sensitivity and selectivity.

Tetracyanonickelate (II)/KOH/reduced graphene oxide fabricated carbon felt for mediated electron transfer type electrochemical sensor for efficient detection of N2O gas at room temperature.

N2O is the most significant anthropogenic greenhouse gas, which cause the ozone depletion. Hence, the room temperature detection of N2O is highly desirable. In this work, The TCN(II)-KOH-rGO/CF modified electrode was successfully fabricated by drop coating method. The synthesized electrode was successfully characterized by SEM, TEM, FT-IR and XRD. The sensor electrode was used to detect different N2O concentration in flow conditions at room temperature. TCN(II)-KOH-rGO/CF modified electrode showed high sensitivity towards N2O, a wide range from 1ppm to 16 ppm and low detection of 1 ppm N2O were achieved for the TCN(II)-KOH-rGO/CF modified electrode. The limit of detection and the response towards this nitrogen oxide is competitive to other sensing methods. In addition, the sensitivity of the electrochemical sensor electrode was compared with the online Gas Chromatography. Additionally, the selectivity of the working electrode was analyzed and specified. The working electrode stability was analyzed for more than 30 days shows good stability. The fabricated TCN(II)-KOH-rGO/CF electrode is easier to prepare to get excellent analytical performance towards N2O. Hence, the proposed TCN(II)-KOH-rGO/CF electrode could be the suitable material for detection of N2O in the real site process.

Bamboo fiber strengthened poly(lactic acid) composites with enhanced interfacial compatibility through a multi-layered coating of synergistic treatment strategy.

In this study, a mild and eco-friendly synergistic treatment strategy was investigated to improve the interfacial compatibility of bamboo fibers with poly(lactic acid). The characterization results in terms of the chemical structure, surface morphology, thermal properties, and water resistance properties demonstrated a homogeneous dispersion and excellent interfacial compatibility of the treated composites. The excellent interfacial compatibility is due to multi-layered coating of bamboo fibers using synergistic treatment involving dilute alkali pretreatment, polydopamine coating and silane coupling agent modification. The composites obtained using the proposed synergistic treatment strategy exhibited excellent mechanical properties. Optimal mechanical properties were observed for composites with synergistically treated bamboo fiber mass proportion of 20 %. The tensile strength, elongation at break and tensile modulus of the treated composites were increased by 63.06 %, 183.04 % and 259.04 %, respectively, compared to the untreated composites. This synergistic treatment strategy and the remarkable performance of the treated composites have a wide range of applicability in bio-composites (such as industrial packaging, automotive lightweight interiors, and consumer goods).