DO ORAL CARE AND REHABILITATION IMPROVE COGNITIVE FUNCTION? A SYSTEMATIC REVIEW OF CLINICAL STUDIES.

OBJECTIVES: An increasing number of studies have identified an association between oral health status and cognitive function. However, the effect of oral interventions, including oral health care, dental treatment and oral motor exercises, on cognitive function remains unclear. This systematic review examined whether oral interventions contribute to the long-term improvement of cognitive status. METHODS: Four databases were searched (MEDLINE, Web of Science, Cochrane Library, and ICHUSHI Web) to identify randomized and nonrandomized controlled trial studies and prospective cohort studies from inception until 1 September 2023, published in English or Japanese. The Cochrane risk of bias tool for randomized controlled trials and the risk of bias assessment tool for nonrandomized studies were used to assess bias risk. RESULTS: A total of 20 articles were included in the qualitative analysis; 13 articles were published in English, and 7 were published in Japanese. The implemented interventions were oral care in 8 studies, dental treatment in 8 studies, and oral motor exercise in 4 studies. One study found a significant effect on attention following oral care intervention. Some dental treatments influenced cognitive function, although a clear positive effect was not determined. In 1 study, attention and working memory improved in the chewing exercise group. CONCLUSIONS: Several studies verified the improvement effects of oral interventions, such as oral care, dental treatment, and oral motor exercise, on cognitive function or impairment. However, there was still a lack of conclusive evidence that such an intervention clearly improved cognitive function. To clarify the effects of oral interventions on cognitive function, it is necessary to examine participants, interventions, and outcome measures in detail.

Primary stability of different implant macrodesigns in a sinus floor elevation simulated model: an ex vivo study.

BACKGROUND: A novel type of implant (Straumann® BLX implant) has been developed for certain stability from the mechanical and biological aspects and is expected for the implant placement in atrophic maxilla with sinus floor elevation (SFE). PURPOSE: The aim of this study was to evaluate the primary stability in the implants with different macrodesigns in an SFE simulated model. Primary stabilities defined as maximum insertion torque (MIT) and implant stability quotient (ISQ) were compared between this novel type of implant and other types. MATERIALS AND METHODS: Five types of Straumann® 10 mm length implants (Standard Plus; SP, Tapered Effect; TE, Bone Level; BL, Bone Level Tapered; BLT and BLX) and two types of Straumann® 6 mm length implants (SP short, BLX short) were used in this study. Each implant was inserted through 5 mm-thick porcine iliac crest blocks (an SFE simulated model). Primary stability was evaluated by using MIT and ISQ. RESULTS: The mean value of MIT for BLX group showed significantly higher values than SP, BL (p < 0.01), and TE (p < 0.05) groups. The mean value of ISQ for BLX group was significantly higher than the other groups (p < 0.01). The mean value of MIT and ISQ for BLX and BLX short group were significantly higher than those for SP and SP short group (p < 0.01). CONCLUSIONS: In an SFE simulated ex vivo model, BLX group showed the highest values. These results suggest that implant selection can play a crucial role in the achievement of primary stability during SFE and simultaneous implant placement.

The impact of surface alteration on epithelial tissue attachment after the mechanical cleaning of titanium or zirconia surface.

OBJECTIVE: Mechanical plaque removal may alter the surface morphology of the gingival penetration part of the implant. We applied an air-powered abrasive system (AP), titanium curette (TC), stainless curette (SC), ultrasound scaler (US), and titanium brush (TB) which are commonly used to remove plaque, to titanium or zirconia and the changes in surface morphology and the epithelial attach against substrata. MATERIALS AND METHODS: (a) The morphological changes of titanium and zirconia after mechanical cleaning were assessed by scanning electron microscopy and a roughness analyser. (b) Oral epithelial cells of rats were inoculated on the surface of the materials after mechanical cleaning, and the adherence of epithelial cells was observed. (c) The maxillary first molars were extracted from the rats and replaced by experimental titanium or zirconia implants. The length of the immunoreactive laminin-332 band was observed at the implant-peri-implant epithelium interface. RESULTS: (a) The surface roughness increased in experimental groups except the AP group. (b) Among the experimental groups, the AP group showed the highest number of attached cells. (c) The length of the immunoreactive laminin-332 band was longer in the control group than those in all five experimental groups. Among the experimental groups, the AP group showed the longest band. CONCLUSION: All mechanical cleaning methods increased the surface roughness of the materials except AP. AP did not cause distinct implant surface alterations. Surface alteration caused by mechanical cleaning may evoke inferior for epithelial attachment and reduce resistance against foreign infiltration.

Generation and histomorphometric evaluation of a novel fluvastatin-containing poly(lactic-co-glycolic acid) membrane for guided bone regeneration.

The purpose of this study was to evaluate the effects of a poly(lactic-co-glycolic acid) (PLGA) membrane containing fluvastatin on bone regeneration at bone defects in rat calvaria and tibia for possible use as a guided bone regeneration (GBR) membrane. PLGA and fluvastatin-containing PLGA (PLGA-fluvastatin) membranes were prepared and mechanical properties were evaluated. Standardized bony defects were created in rat calvaria and the right tibia, and covered with a PLGA or PLGA-fluvastatin membrane. Bone regeneration was evaluated using image analysis based on histologic examination. At 4 and 8 weeks after membrane implantation, the PLGA-fluvastatin group displayed enhanced new bone formation around the edge of the defect compared with the PLGA membrane group in the calvarial model. Thick bone regeneration was observed in tibia-defect sites in the PLGA-fluvastatin membrane group. These results suggest that the PLGA-containing fluvastatin membrane prepared in this study may potentially be used as a GBR membrane.

Micro-computed tomography analysis of early stage bone healing using micro-porous titanium mesh for guided bone regeneration: preliminary experiment in a canine model.

The aim of this study was to evaluate the amount of bone formation beneath a defect area after treatment with titanium mesh membranes with different thicknesses and pore sizes alone or in combination with bone graft to induce bone formation during the early stage of healing time. The mandibular premolars were extracted bilaterally from three adult beagle dogs, and 8-mm-diameter bone defects were created on the buccal site of the premolar regions. Hydroxyapatite bone graft substitute was applied in the defect site unilaterally, and other site was left empty. Then, a novel micro-porous mesh (50 µm in pore diameter) or commercially available macro-porous titanium mesh (1700 µm in pore diameter) was placed on the defect and secured with screws. After 4 weeks, the mandibles were harvested, imaged using micro-computed tomography, and prepared for histological and morphometric evaluation. Higher new bone volumes (mm3), percentage of new bone volumes in the total defect volumes (bone ratio: %), and new bone area (mm2) through morphometric evaluation were found on the novel membranes with 50-µm-diameter pores compared to the commercial titanium mesh. Moreover, experiment sites without bone graft were observed with higher new bone volume and bone ratio compared with sites with bone graft. However, bone mineral density of novel mesh was observed to be lower compared with other experimental sites. Under the experimental condition, the result of this study suggests that titanium meshes with 50-µm-diameter pores were effective for guided bone regeneration in the early stage of healing.

Tissue Reaction to a Novel Bone Substitute Material Fabricated With Biodegradable Polymer-Calcium Phosphate Nanoparticle Composite.

PURPOSE: The aim of this study was to evaluate the effectiveness of a novel bone substitute material fabricated using a biodegradable polymer-calcium phosphate nanoparticle composite. METHODS: Porous structured poly-L-lactic acid (PLLA) and hydroxyapatite (HA) nanoparticle composite, which was fabricated using solid-liquid phase separation and freeze-drying methods, was grafted into bone defects created in rat calvarium or tibia. Rats were killed 4 weeks after surgery, and histological analyses were performed to evaluate new bone formation. RESULTS: Scanning electron microscopic observation showed the interconnecting pores within the material and the pore diameter was approximately 100 to 300 µm. HA nanoparticles were observed to be embedded into the PLLA beams. In the calvarial implantation model, abundant blood vessels and fibroblastic cells were observed penetrating into pores, and in the tibia model, newly formed bone was present around and within the composite. CONCLUSIONS: The PLLA-HA nanoparticle composite bone substitute developed in this study showed biocompatibility, elasticity, and operability and thus has potential as a novel bone substitute.

Fibroblast attachment onto novel titanium mesh membranes for guided bone regeneration.

Titanium mesh is used in orthopedic surgery as a barrier membrane, as it offers suitable characteristics, which allow mechanical support during the formation of new bone. An ideal membrane would facilitate cell attachment onto its surface, thereby helping to stabilize the blood clot and integrate the membrane into the tissue. However, currently available titanium mesh has millimeter-level pore sizes, which lead to soft tissue ingrowth through the pores. Therefore, the aim of this study was to investigate the fibroblast attachment and migration on different designs of novel titanium mesh with micrometer pore size for guided bone regeneration treatment. Six types of novel titanium mesh membrane and three groups of commercially available membranes were used in this study. Fibroblasts were isolated from 4-day-old green fluorescence protein rats and seeded onto membrane surfaces. At 24 h, the cells attached to the membrane surfaces were fixed and stained with DAPI. The blue-stained nuclei on membrane surfaces, and both upper and lower sides were counted. It was shown that different membrane materials, structure and design differ considerably in their capacity for cell attachment to the membrane surface. The novel membranes, especially mesh with 12 pores compared with mesh with multi-pores, allowed the fibroblast attachment on the membrane surface, but hindered the fibroblast migration through the pores into the lower side of the membrane, which is associated with the defect area in the clinical condition.

Additional Effects of Platelet-Rich Fibrin on Bone Regeneration in Sinus Augmentation With Deproteinized Bovine Bone Mineral: Preliminary Results.

PURPOSE: Platelet-rich fibrin (PRF) has been reported to contribute to bone regeneration; however, little is known about details with deproteinized bovine bone mineral (DBBM). This study aims to evaluate additional effects of PRF on bone regeneration in sinus augmentation with DBBM. MATERIALS AND METHODS: Sinus augmentations were made with DBBM/PRF mixture as lateral approach for 4 sinuses from 4 patients. Bone biopsies were obtained from posterior maxilla at the implant placements 7 or 10 months after sinus augmentations. Histological observations and histomorphometric analyses from augmented areas were performed. RESULTS: The new bone formation was found around the DBBMs with very good contact while surfaces of DBBMs were partly resorbed. Osteoclasts recognized the DBBMs for remodeling, followed by new bone running. The histomorphometric analyses revealed that mean percentages of newly formed bone were 31.7 ± 1.2%, 21.0 ± 1.0%, 38.0 ± 0.6%, and 47.0 ± 0.6%, respectively (mean 34.5 ± 5.7%). CONCLUSIONS: Additional effects of PRF could be found because of higher percentages of newly bone formation by DBBM/PRF mixture than those by DBBM individual in previous reports.

Prosthetic aspects in adult osteopetrosis.

Osteopetrosis (OP) is a rare condition characterized by skeletal sclerosis caused by dysfunctional osteoclasts. Though many reports have described severe infantile-malignant autosomal recessive OP, few have described the prosthetic management of adult OP. This report discusses the prosthetic treatment of adult OP. Although prosthodontists should try to reconstruct occlusal function as much as possible, a conservative prosthodontic approach may be a reasonable and recommended treatment option for minimizing the risk of further osteomyelitis and osteonecrosis.

An observational study of oral functions in patients aged from 20 to 49 years.

PURPOSE: The purpose of this study was to analyze oral functions (MOF: maximum occlusal force; MTP: maximum tongue pressure; and MF: masticatory function) in Eichner A subjects aged from 20 to 49 years. METHODS: The data of three oral functions in Eichner A patients aged from 20 to 49 years were extracted. The mean values, subjects with lower values than the thresholds, and the differences among ages, and between sexes were investigated retrospectively. RESULTS: Although the mean values of these oral functions in 183 subjects were higher than the thresholds, the numbers of the subjects with lower values than the thresholds were 30 in MTP, 19 in MOF, and only three in MF. No significant effects of ages on all oral functions were identified and all functions in males were significantly higher than those in females. The subjects whose two functions were lower than the thresholds were nine females, eight of whom were associated with malalignment. CONCLUSION: Although the mean values of oral functions were higher than the thresholds, some patients showed lower values, especially in MOF and MTP, even though they were unaware of any inconvenience. Patients with malalignment might be associated with declined oral functions.

Synergistic Effect of Nano Strontium Titanate Coating and Ultraviolet C Photofunctionalization on Osteogenic Performance and Soft Tissue Sealing of poly(ether-ether-ketone).

This study aimed to evaluate the bioactivity of poly(ether ether ketone) (PEEK) after surface modification by persistent photoconductive strontium titanate (SrTiO3) magnetron sputtering and ultraviolet (UV) C irradiation. According to the different modifications, the PEEK specimens were randomly divided into five groups (n = 38/group): PEEK, Sr100-PEEK, Sr200-PEEK, UV/PEEK, and UV/Sr200-PEEK. Then, the specimens of Sr100-PEEK and Sr200-PEEK groups were, respectively, coated with 100 and 200 nm thickness photocatalyst SrTiO3 on the PEEK surface by magnetron sputtering. Subsequently, UV-C light photofunctionalized the specimens of PEEK and Sr200-PEEK groups to form UV/PEEK and UV/Sr200-PEEK groups. The specimens were characterized by a step meter, scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDX), and a water contact angle meter. The release test of the Sr ion was performed by inductively coupled plasma mass spectrometry (ICP-MS). In vitro study, osteogenic activity (MC3T3-E1 osteoblast-like cells) and epithelial and connective tissue attachment (gingival epithelial cells GE1 and fibroblasts NIH3T3) were analyzed in five groups. Surface morphology of the specimens was changed after coating, and the Sr content on the Sr-PEEK surface was increased with increasing coating thickness. In addition, the contact angle was increased significantly after magnetron sputtering. After UV-C photofunctionalization, the content of surface elements changed and the contact angle was decreased. The release of Sr ion was sustained, and the final cumulative release amount did not exceed the safety limit. In vitro experiments showed that SrTiO3 improved the cell activity of MC3T3-E1 and UV-C irradiation further enhanced the osteogenic performance of PEEK. Besides, UV-C irradiation also significantly promoted the cell viability, development, and expression of adhesion proteins of GE1 and NIH3T3 on PEEK. The present investigation demonstrated that nano SrTiO3 coating with UV-C photofunctionalization synergistically enhanced the osteogenic properties and soft tissue sealing function of PEEK in vitro.

Association Between Reduced Posterior Occlusal Contact and Alzheimer's Disease Onset in Older Japanese Adults: Results from the LIFE Study.

BACKGROUND: An association between poor oral health and cognitive decline has been reported. Most of these studies have considered the number of teeth as a criterion, only a few studies have analyzed the relationship between occlusal status and Alzheimer's disease (AD). OBJECTIVE: To elucidate whether posterior occlusal contact is associated with AD, focusing on the Eichner classification, among an older population aged 65 years or older in Japan. METHODS: This study used monthly claims data of National Health Insurance in Japan from April 2017 to March 2020. The outcome was newly diagnosed AD defined according to ICD-10 code G30. The number of teeth was estimated by dental code data, and occlusal contact was divided into three categories, namely A, B, and C, according to the Eichner classification. Multivariate Cox proportional hazards models were used to analyze the association between a new diagnosis of AD and the Eichner classification. RESULTS: A total of 22,687 participants were included, 560 of whom had newly diagnosed AD during a mean follow-up period of 12.2 months. The AD participants had a lower proportion of Eichner A and a higher proportion of Eichner C. After adjusting for covariates, hazard ratios (95% confidence intervals) with Eichner B and C were 1.34 (1.01-1.77) and 1.54 (1.03-2.30), respectively. CONCLUSION: In older people aged≥65 years old, reduced posterior occlusal contact as well as tooth loss have an impact on AD. This study emphasizes the importance of paying attention to occlusal contacts to reduce the risk of AD.

Bacterial adhesion affinities of various implant abutment materials.

OBJECTIVES: To investigate bacterial adhesion to various abutment materials. MATERIAL AND METHODS: Thirty volunteers participated in this study. Resin splints were fabricated, and five types of disks were fabricated from pure titanium, gold-platinum alloy, zirconia, alumina, and hydroxyapatite with uniform surface roughness and attached to the buccal surface of each splint. After 4 days of use by the subjects, the plaque accumulated on the disk surfaces was analyzed. The bacterial community structure was evaluated using 16S rRNA gene profiling with terminal restriction fragment length polymorphism analysis. The total bacterial count on each disk was estimated using quantitative polymerase chain reaction. RESULTS: Terminal restriction fragment length polymorphism profiles were more similar between tested materials than between subjects, suggesting that the bacterial community structures on the abutment material were influenced more by the individuals than by the type of material. However, the total number of bacteria attached to a disk was significantly different among five materials (P < 0.001, Brunner-Langer test for longitudinal data). Fewer bacteria were attached to the gold-platinum alloy than to the other materials. CONCLUSIONS: Gold-platinum alloy appears to be useful material for abutments when considering the accumulation of plaque. However, alternative properties of the abutment material, such as effects on soft tissue healing, should also be taken into consideration when choosing an abutment material.

Anterior Hyperfunction by Mandibular Anterior Teeth: A Narrative Review.

"Combination syndrome", defined by Kelly in 1972, is a challenging condition observed in a patient with an edentulous maxilla and a partially edentulous mandible with only mandibular anterior teeth. "Anterior hyperfunction syndrome" is regarded as a synonym of combination syndrome and was first described in 1994. Although these terms have been well known, the definition of "anterior hyperfunction" has not been described yet. This narrative review focused on anterior hyperfunction and discussed the etiology and the clinical managements. An electronic bibliographic search for this literature review was conducted in addition to the review of our clinical cases. The previous reports indicated that combination syndrome with all five features was rarely observed. The patients with anterior hyperfunction generally showed the loss of posterior occlusal supports and the loss of vertical dimension of occlusion. To manage anterior hyperfunction, these conditions should be improved using conventional removable prostheses and implant-supported prostheses. Anterior hyperfunction is attributed to mandibular anterior teeth and some interventions for mandibular anterior teeth are required in many cases. Additionally, it must be noted that implant-supported prostheses may lead to anterior hyperfunction. In conclusion, comprehensive approaches for the remaining teeth and the prostheses will be required to manage this complex condition.

Comprehensive Analyses of Masticatory Function in Maxillectomy Patients with Functioning Removable Prostheses: A Retrospective Cross-Sectional Study.

The aim of this retrospective cross-sectional study was to comprehensively assess masticatory function in maxillectomy patients with functioning removable prostheses. Their general and oral profiles, the measurement values of their oral functions, including masticatory function, and the history of tumor therapy were extracted from medical charts. The correlations of masticatory function with numerical data and the effects of tumor therapy-related factors on masticatory function were evaluated. In addition, a stepwise conditional logistic regression analysis was performed to identify the potential predictive factors comprehensively. The data from 55 maxillectomy patients revealed that the median value of masticatory function (138.0 mg/dL) was higher than the threshold (100.0 mg/dL) based on the concept of oral hypofunction. Moderate correlations of masticatory function with the number of remaining teeth, the number of functioning occlusal supports, and maximum occlusal force were found, as well as a weak correlation with maximum tongue pressure. These variables also showed statistically significant coefficients (p < 0.01). No significant effect of each tumor therapy-related factor on masticatory function was detected. A logistic regression analysis identified the number of functioning occlusal supports as a significant predictive factor. These results implied the crucial interactions of masticatory function with various factors and the specificities of maxillectomy patients.

Current surface modification strategies to improve the binding efficiency of emerging biomaterial polyetheretherketone (PEEK) with bone and soft tissue: A literature review.

PURPOSE: The aim of this study was to review the literature on current surface modification strategies used to improve the binding efficiency of an emerging biological material, polyetheretherketone (PEEK), with bone and soft tissues. STUDY SELECTION: This review was based on articles retrieved from PubMed, Google Scholar, Web of Science, and ScienceDirect databases. The main keywords used during the search were "polyetheretherketone (PEEK)," "implant," "surface modification," "biomaterials," "bone," "osseointegration," and "soft tissue." RESULTS: The suitability of PEEK surface modification strategies has been critically analyzed and summarized here. Many cell and in vivo experiments in small animals have shown that the use of advanced modification technologies with appropriate surface modification strategies can effectively improve the surface inertness of PEEK, thereby improving its binding efficiency with bone and soft tissues. CONCLUSIONS: Surface modifications of PEEK have revealed new possibilities for implant treatment; however, most results are based on in vitro or short-term in vivo evaluations in small animals. To achieve a broad application of PEEK in the field of oral implantology, more in vivo experiments and long-term clinical evaluations are needed to investigate the effects of various surface modifications on the tissue integration ability of PEEK to develop an ideal implant material.

Evaluation of carbonate apatite as a bone substitute in rat extraction sockets from the perspective of mesenchymal stem cells.

Carbonate apatite (CO3Ap) is a major inorganic bone component and an effective bone substitute. To clarify the function of CO3Ap, we compared differences among CO3Ap, hydroxyapatite (HAp), and ß-tricalcium phosphate (ß-TCP) by focusing on mesenchymal stem cells (MSCs) that have a role in wound healing. For in vivo experiments, maxillary molars were removed and the bone substitute was inserted. MSC accumulation around extraction sockets was significantly promoted in CO3Ap and ß-TCP groups. For in vitro experiments, MSCs were cultured with bone substitutes. The differentiation potential and amount of calcium deposition were significantly lower in CO3Ap and HAp groups than in the ß-TCP group. Increases in insulin-like growth factor-I and vascular endothelial growth factor were found only in the CO3Ap group. CO3Ap-filled extraction sockets accumulated MSCs, and MSCs cultured in the presence of CO3Ap produced large amounts of growth factors. These results suggest that CO3Ap promotes healing of tooth extraction sockets.

Butyrate as a Potential Driver of a Dysbiotic Shift of the Tongue Microbiota.

The tongue dorsum is colonized by a stable microbiota, mostly comprising common commensal taxa. However, the predominance of each taxon varies among individuals. We hypothesized that equilibrium in the tongue microbiota is affected by exposure to butyrate in the oral fluid, which is reported to affect the growth of specific microorganisms. In this study, the bacterial composition of the tongue microbiotas of 69 male adults was determined via 16S rRNA gene sequencing to investigate its relationship to n-butyric acid concentration in oral rinse samples. The tongue microbiotas of individuals with a higher n-butyric acid level had higher relative abundances of Prevotella histicola, Veillonella atypica, and Streptococcus parasanguinis and lower relative abundances of Neisseria subflava and Porphyromonas pasteri. Subsequently, tongue microbiota samples collected from 12 adults were cultivated for 13 h in basal medium containing mucin and different concentrations of sodium butyrate (0, 0.8, 1.6, and 3.2 mM) to assess its effect on the growth of tongue microbiota organisms. The bacterial composition of the cultivated tongue microbiotas also demonstrated a significant gradual shift with an increase in sodium butyrate levels in beta-diversity analysis. N. subflava was significantly less predominant in the microbiota after cultivation with an increased addition of sodium butyrate, although no statistical difference was observed in the other aforementioned taxa. These results suggest that butyrate in the oral fluid is partially involved in the dysbiotic shift of the tongue microbiota. IMPORTANCE Oral microbial populations that are always ingested with saliva have attracted increasing attention because more oral microorganisms than previously known reach distal organs, such as the lungs and intestinal tract, thereby affecting our health. However, although such organisms are predominately derived from the tongue dorsum, the dynamics and determinants of the tongue microbiota composition remain unclear. This study demonstrated that exposure to butyrate could lead to a dysbiotic shift in the tongue microbiota using an observational epidemiological and microbiota cultivation approach. This result adds a new dimension to tongue microbiota ecology.

Relationship between the bone density estimated by cone-beam computed tomography and the primary stability of dental implants.

OBJECTIVES: The aims of this study were to objectively assess bone quality with density values obtained by cone-beam computed tomography (CBCT) and to determine the correlations between bone density and primary stability of dental implants. MATERIAL AND METHODS: Eighteen Straumann implants were inserted into 18 fresh femoral heads of swine. The bone densities of implant recipient sites were preoperatively determined by the density value using CBCT. The maximum insertion torque value of each implant was recorded using a digital torque meter. Resonance frequency, which represented a quantitative unit called the implant stability quotient (ISQ), was measured using an Osstell Mentor immediately after the implant placement. Spearman's correlation coefficient was calculated to evaluate the correlations among density values, insertion torques, and ISQs at implant placement. RESULTS: The density values ranged from 98 to 902. The mean density value, insertion torque, and ISQ were 591 ± 226, 13.4 ± 5.2 Ncm, and 67.1 ± 8.1, respectively. Statistically significant correlations were found between the density values and insertion torque (r(s) =0.796, P<0.001), density values and ISQ (r(s) =0.529, P=0.024), and insertion torque and ISQ (r(s) =0.758, P<0.001). CONCLUSIONS: The bone quality evaluated by specific CBCT showed a high correlation with the primary stability of the implants. Hence, preoperative density value estimations by CBCT may allow clinicians to predict implant stability. Whether the density values obtained by the CBCT device used in the present study could be applied to other devices requires further elucidation.