The mechanical and clinical influences of prosthetic index structure in Morse taper implant-abutment connection: a scoping review.

AIM: The implant-abutment connection is a crucial factor in determining the long-term stability of dental implants. The use of a prosthetic index structure in the Morse taper implant-abutment connection has been proposed as a potential solution to improve the accuracy of this connection. This study aimed to provide a scoping review of the mechanical and clinical effects of the prosthetic index structure in the Morse taper implant-abutment connection. METHODS: A systematic scoping review of articles related to "dental implants," "Morse taper," and "index" was conducted using PubMed/MEDLINE, Web of Science, Cochrane, and Scopus databases, as well as a comprehensive literature search by two independent reviewers. Relevant articles were selected for analysis and discussion, with a specific focus on investigating the impact of prosthetic index structure on the mechanical and clinical aspects of Morse taper implant-abutment connections. RESULTS: Finally, a total of 16 articles that met the inclusion criteria were included for data extraction and review. In vitro studies have demonstrated that the use of a prosthetic index structure in the Morse taper implant-abutment connection can affect stress distribution, biomechanical stability, and reverse torque values, which may reduce stress within cancellous bone and help limit crestal bone resorption. However, retrospective clinical studies have shown that this structure is also associated with a higher risk of mechanical complications, such as abutment fracture and abutment screw loosening. CONCLUSIONS: Therefore, the clinical trade-off between preventing crestal bone resorption and mechanical complications must be carefully considered when selecting appropriate abutments. The findings suggest that this structure can improve the accuracy and stability of the implant-abutment connection, but its use should be carefully evaluated in clinical practice.

Comparison the accuracy of a novel implant robot surgery and dynamic navigation system in dental implant surgery: an in vitro pilot study.

BACKGROUND: To compare the accuracy of dental implant placement using a novel dental implant robotic system (THETA) and a dynamic navigation system (Yizhimei) by a vitro model experiment. METHODS: 10 partially edentulous jaws models were included in this study, and 20 sites were randomly assigned into two groups: the dental implant robotic system (THETA) group and a dynamic navigation system (Yizhimei) group. 20 implants were placed in the defects according to each manufacturer's protocol respectively. The implant platform, apex and angle deviations were measured by fusion of the preoperative design and the actual postoperative cone-beam computed tomography (CBCT) using 3D Slicer software. Data were analyzed by t - test and Mann-Whitney U test, p < 0.05 was considered statistically significant. RESULTS: A total of 20 implants were placed in 10 phantoms. The comparison deviation of implant platform, apex and angulation in THETA group were 0.58 ± 0.31 mm, 0.69 ± 0.28 mm, and 1.08 ± 0.66° respectively, while in Yizhimei group, the comparison deviation of implant platform, apex and angulation were 0.73 ± 0.20 mm, 0.86 ± 0.33 mm, and 2.32 ± 0.71° respectively. The angulation deviation in THETA group was significantly smaller than the Yizhimei group, and there was no significant difference in the deviation of the platform and apex of the implants placed using THETA and Yizhimei, respectively. CONCLUSION: The implant positioning accuracy of the robotic system, especially the angular deviation was superior to that of the dynamic navigation system, suggesting that the THETA robotic system could be a promising tool in dental implant surgery in the future. Further clinical studies are needed to evaluate the current results.

Dental Pulp Stem Cells for Bone Tissue Engineering: A Literature Review.

Bone tissue engineering (BTE) is a promising approach for repairing and regenerating damaged bone tissue, using stem cells and scaffold structures. Among various stem cell sources, dental pulp stem cells (DPSCs) have emerged as a potential candidate due to their multipotential capabilities, ability to undergo osteogenic differentiation, low immunogenicity, and ease of isolation. This article reviews the biological characteristics of DPSCs, their potential for BTE, and the underlying transcription factors and signaling pathways involved in osteogenic differentiation; it also highlights the application of DPSCs in inducing scaffold tissues for bone regeneration and summarizes animal and clinical studies conducted in this field. This review demonstrates the potential of DPSC-based BTE for effective bone repair and regeneration, with implications for clinical translation.

Alveolar ridge preservation in sockets with severe periodontal destruction using autogenous partially demineralized dentin matrix: A randomized controlled clinical trial.

BACKGROUND: The preservation and reconstruction of alveolar ridge volume in extraction sockets of molars affected by severe periodontitis is a critical challenge that requires clinical attention. PURPOSE: This randomized controlled clinical trial was designed to evaluate the efficiency of autogenous partially demineralized dentin matrix (APDDM) for alveolar ridge preservation (ARP) in severely periodontally compromised sockets compared to spontaneous healing (SH) on radiographic and histomorphometric outcomes. MATERIALS AND METHODS: Thirty-two patients with 32 periodontally compromised molars were randomized into either the test group, which received ARP using APDDM covered with a collagen sponge, or the control group, which underwent SH. Linear and volumetric changes were assessed using superimposed cone-beam computed tomography (CBCT) acquired pre-extraction and after a 4-month healing time. Histomorphometric evaluation was performed on trephine cores harvested during implant placement. RESULTS: All sites healed uneventfully. The ridge width at 1 mm apical to the bone crest increased by 5.03, 4.50, and 5.20 mm in the mesial, middle, distal area in the APDDM group, while decreasing by -1.98, -2.19, and -1.98 mm in the SH group, respectively (p < 0.05). The height increase of the central bone was significantly higher in the APDDM group than in the SH group (p < 0.05). The height decrease of the buccal (mesial, middle, distal) bone plate was lower in the APDDM group than in the SH group (p < 0.05). After a 4-month healing time, bone volume increased by 37.07% in the APDDM group and by only 2.33% in the SH group (p < 0.05). Histomorphometric analysis revealed that APDDM particles were surrounded by newly formed bone, with partially absorbed residual APDDM materials observed. New bone, APDDM remnants, and connective tissue occupied 39.67 ± 8.28%, 23.66 ± 9.22%, and 36.67 ± 17.05% of the areas in the APDDM group, respectively. CONCLUSIONS: ARP using APDDM was effective, resulting in a significant increase in both linear and volumetric changes in severely periodontally compromised extraction sockets compared to SH. These findings suggest that APDDM may serve as a promising new clinical option for the reconstruction of alveolar ridge dimensions.

The effect of an extra hydrophobic resin layer on the bond strength and durability of one-step universal adhesives used as a primer.

OBJECTIVES: To determine the effect of an extra hydrophobic resin layer (EHL) on the bond strength and durability of three different pH one-step universal adhesives (UAs) utilized in self-etch (SE) mode, and to explore whether UAs can be used as a primer in two-step bonding system. METHODS: Three different pH UAs were utilized: G-Premio Bond (GPB), Scotchbond Universal (SBU), All-Bond Universal (ABU), while the bonding agent of Clearfil SE Bond 2 (SE2) was selected as the EHL. For the EHL groups, EHL was applied after the air blow of each UA and before light curing. The microtensile bond strength (µTBS), fracture modes, interfacial structures and nanoleakage (NL) were evaluated after 24 h water storage and after 15,000 thermal cycling (TC). Elastic modulus (EM) and hardness (H) was tested by a nanoindenter after 24 h. RESULTS: Significantly higher µTBS was achieved in the GPB+EHL group compared with GPB both at 24 h and after 15,000 TC, while the additional use of EHL did not improve the µTBS of SBU and ABU significantly both at 24 h and after 15,000 TC. GPB+EHL demonstrated lower NL than GPB. The mean EM and H of the adhesive layer in GPB+EHL was significantly decreased compared with GPB. CONCLUSIONS: The results indicated that the bond strength and durability of low pH one-step UA (GPB) were significantly improved by additional application of EHL both at 24 h and after 15,000 TC, while no significant improvement was observed for ultra-mild one-step UAs (SBU and ABU). CLINICAL SIGNIFICANCE: This study indicates that GPB can be used as a primer in a two-step bonding system, while SBU and ABU may not be as effective. These findings may help guide clinicians in selecting the appropriate UAs and bonding techniques for different clinical scenarios.

An Up-To-Date Overview of Dental Tissue Regeneration Using Dental Origin Mesenchymal Stem Cells: Challenges and Road Ahead.

Stem cells (SCs) research has experienced exponential growth in recent years. SC-based treatments can enhance the lives of people suffering from cardiac ischemia, Alzheimer's disease, and regenerative drug conditions, like bone or loss of teeth. Numerous kinds of progenitor/SCs have been hypothesized to depend on their potential to regain and/or heal wounded tissue and partly recover organ function. Growing data suggest that SCs (SCs) are concentrated in functions and that particular tissues have more SCs. Dental tissues, in particular, are considered a significant cause of mesenchymal stem cells (MSCs) cells appropriate for tissue regeneration uses. Tissue regeneration and SCs biology have particular attention in dentistry because they may give a novel method for creating clinical material and/or tissue redevelopment. Dental pulp, dental papilla, periodontal ligament, and dental follicle contain mesenchymal SCs. Such SCs, which must be identified and cultivated in specific tissue culture environments, may be used in tissue engineering applications such as tooth tissue, nerve regeneration, and bone redevelopment. A new cause of SCs, induced pluripotent SCs, was successfully made from human somatic cells, enabling the generation of the patient and disease-specific SCs. The dental SC's (DSCs) multipotency, rapid proliferation rate, and accessibility make it an ideal basis of MSC for tissue redevelopment. This article discusses current advances in tooth SC investigation and its possible application in tissue redevelopment.