Wide bandgap semiconductor nanomembranes as a long-term biointerface for flexible, implanted neuromodulator.

Electrical neuron stimulation holds promise for treating chronic neurological disorders, including spinal cord injury, epilepsy, and Parkinson's disease. The implementation of ultrathin, flexible electrodes that can offer noninvasive attachment to soft neural tissues is a breakthrough for timely, continuous, programable, and spatial stimulations. With strict flexibility requirements in neural implanted stimulations, the use of conventional thick and bulky packages is no longer applicable, posing major technical issues such as short device lifetime and long-term stability. We introduce herein a concept of long-lived flexible neural electrodes using silicon carbide (SiC) nanomembranes as a faradic interface and thermal oxide thin films as an electrical barrier layer. The SiC nanomembranes were developed using a chemical vapor deposition (CVD) process at the wafer level, and thermal oxide was grown using a high-quality wet oxidation technique. The proposed material developments are highly scalable and compatible with MEMS technologies, facilitating the mass production of long-lived implanted bioelectrodes. Our experimental results showed excellent stability of the SiC/silicon dioxide (SiO2) bioelectronic system that can potentially last for several decades with well-maintained electronic properties in biofluid environments. We demonstrated the capability of the proposed material system for peripheral nerve stimulation in an animal model, showing muscle contraction responses comparable to those of a standard non-implanted nerve stimulation device. The design concept, scalable fabrication approach, and multimodal functionalities of SiC/SiO2 flexible electronics offer an exciting possibility for fundamental neuroscience studies, as well as for neural stimulation-based therapies.

Nerve repair: toward a sutureless approach.

Peripheral nerve repair for complete section injuries employ reconstructive techniques that invariably require sutures in their application. Sutures are unable to seal the nerve, thus incapable of preventing leakage of important intraneural fluids from the regenerating nerve. Furthermore, sutures are technically demanding to apply for direct repairs and often induce detrimental scarring that impedes healing and functional recovery. To overcome these limitations, biocompatible and biodegradable glues have been used to seal and repair peripheral nerves. Although creating a sufficient seal, they can lack flexibility and present infection risks or cytotoxicity. Other adhesive biomaterials have recently emerged into practice that are usually based on proteins such as albumin and collagen or polysaccharides like chitosan. These adhesives form their union to nerve tissue by either photothermal (tissue welding) or photochemical (tissue bonding) activation with laser light. These biomaterial adhesives offer significant advantages over sutures, such as their capacity to unite and seal the epineurium, ease of application, reduced invasiveness and add the potential for drug delivery in situ to facilitate regeneration. This paper reviews a number of different peripheral nerve repair (or reconstructive) techniques currently used clinically and in experimental procedures for nerve injuries with or without tissue deficit.

Photochemical tissue bonding with chitosan adhesive films.

BACKGROUND: Photochemical tissue bonding (PTB) is a promising sutureless technique for tissue repair. PTB is often achieved by applying a solution of rose bengal (RB) between two tissue edges, which are irradiated by a green laser to crosslink collagen fibers with minimal heat production. In this study, RB has been incorporated in chitosan films to create a novel tissue adhesive that is laser-activated. METHODS: Adhesive films, based on chitosan and containing ~0.1 wt% RB were manufactured and bonded to calf intestine by a solid state laser (λ = 532 nm, Fluence~110 J/cm2, spot size~0.5 cm). A single-column tensiometer, interfaced with a personal computer, tested the bonding strength. K-type thermocouples recorded the temperature (T) at the adhesive-tissue interface during laser irradiation. Human fibroblasts were also seeded on the adhesive and cultured for 48 hours to assess cell growth. RESULTS: The RB-chitosan adhesive bonded firmly to the intestine with adhesion strength of 15 ± 2 kPa, (n = 31). The adhesion strength dropped to 0.5 ± 0.1 (n = 8) kPa when the laser was not applied to the adhesive. The average temperature of the adhesive increased from 26°C to 32°C during laser exposure. Fibroblasts grew confluent on the adhesive without morphological changes. CONCLUSION: A new biocompatible chitosan adhesive has been developed that bonds photochemically to tissue with minimal temperature increase.

Long term recovery of median nerve repair using laser-activated chitosan adhesive films.

Sutures remain the standard peripheral nerve repair technique, whether applied directly or indirectly to nerve tissue. Unfortunately, significant postoperative complications can result, such as inflammation, neuroma formation and foreign body reactions. Photochemical-tissue-bonding (PTB) using rose Bengal (RB) integrated into a chitosan bioadhesive is an alternative nerve repair device that removes the need for sutures. Rats were arranged into three groups: RB-chitosan adhesives-repair, end-to-end epineural suture-repair (surgical standard) and sham laser-irradiated control. Groups were compared through histological assessment, electrophysiological recordings and grip motor strength. RB-chitosan adhesive repaired nerves displayed comparable results when compared to the standard suture-repair based on histological and electrophysiological findings. Functionally, RB-chitosan adhesive was associated with a quicker and more pronounced recovery of grip force when compared to the suture-repair.

Comparison of the effect of glutamate receptor modulators in the 6 Hz and maximal electroshock seizure models.

Glutamatergic ionotropic and metabotropic receptor modulators have been shown to produce anticonvulsant activity in a number of animal seizure models, e.g. maximal electroshock (MES) and DBA/2 sensory-induced seizures. The 6 Hz model of partial seizures is an alternative low frequency, long duration stimulation paradigm resulting in a seizure characterized by jaw and forelimb clonus, immobility, and an elevated tail (Straub-tail). A unique aspect of this model is that it is the only acute electrically-induced seizure model in which levetiracetam has displayed anticonvulsant activity, suggesting that the 6 Hz seizure model may be useful in identifying compounds with unique anticonvulsant profiles. The purpose of the present study was to examine the role of glutamate receptors in the MES and 6 Hz seizure models using a number of NMDA, AMPA/KA, and mGlu receptor modulators. The pharmacological profile of the 6 Hz seizure model was compared to that of the MES model using eight ionotropic glutamate receptor antagonists and eight mGlu receptor modulators. The ionotropic receptor antagonists MK-801, LY235959, NBQX, LY293558, GYKI 52466, LY300168, and LY377770 produced complete protection from tonic extension in the MES model. Furthermore, the noncompetitive mGlu1 (LY456236) and mGlu5 (MPEP) metabotropic receptor antagonists and the mGlu8 metabotropic receptor agonist (PPG) were also effective in the MES model whereas the competitive mGlu1 (LY367385) receptor antagonist, the mGlu2/3 (LY379268 and LY389795) and Group III (L-AP4) metabotropic receptor agonists were ineffective. In contrast, all of the compounds tested, produced dose-dependent protection in the 6 Hz model with an increase in potency as compared to the MES model. The largest protective indices (P.I.=TD50/ED50) observed were associated with the iGlu5 antagonist LY382884 and the mGlu2/3 receptor agonists LY379268 and LY389795 (P.I.=>14, 14, and 4.9, respectively) in the 6 Hz model. The results from the present study support the continued search for glutamate receptor modulators as potential antiepileptic agents. Furthermore these results illustrate the importance of using several different animal seizure models in the search for novel AEDs and the potential utility of the 6 Hz seizure model in identifying novel AEDs.

Tissue repair strength using chitosan adhesives with different physical-chemical characteristics.

A range of chitosan-based biomaterials have recently been used to perform sutureless, laser-activated tissue repair. Laser-activation has the advantage of bonding to tissue through a non-contact, aseptic mechanism. Chitosan adhesive films have also been shown to adhere to sheep intestine strongly without any chemical modification to chitosan. In this study, we continue to investigate chitosan adhesive films and explore the impact on the tissue repair strength and tensile strength characteristics of four types of adhesive film based on chitosan with different molecular weight and degree of deacetylation. Results showed that adhesives based on chitosan with medium molecular weight achieved the highest bonding strength, tensile strength and E-modulus when compared to the other adhesives.

Fabrication and application of rose bengal-chitosan films in laser tissue repair.

Photochemical tissue bonding (PTB) is a sutureless technique for tissue repair, which is achieved by applying a solution of rose bengal (RB) between two tissue edges(1,2). These are then irradiated by a laser that is selectively absorbed by the RB. The resulting photochemical reactions supposedly crosslink the collagen fibers in the tissue with minimal heat production(3). In this report, RB has been incorporated in thin chitosan films to fabricate a novel tissue adhesive that is laser-activated. Adhesive films, based on chitosan and containing ~0.1 wt% RB, are fabricated and bonded to calf intestine and rat tibial nerves by a solid state laser (λ=532 nm, Fluence~110 J/cm(2), spot size~0.5 cm). A single-column tensiometer, interfaced with a personal computer, is used to test the bonding strength. The RB-chitosan adhesive bonds firmly to the intestine with a strength of 15 ± 6 kPa, (n=30). The adhesion strength drops to 2 ± 2 kPa (n=30) when the laser is not applied to the adhesive. The anastomosis of tibial nerves can be also completed without the use of sutures. A novel chitosan adhesive has been fabricated that bonds photochemically to tissue and does not require sutures.