Comparative Analysis of PEG-Free and PEG-Based Self-Emulsifying Drug Delivery Systems for Enhanced Oral Bioavailability of Therapeutic (Poly) Peptides.

This study aims to compare the potential of Polyethylene glycol (PEG-free and PEG-based self-emulsifying drug delivery systems (SEDDS) for the oral administration of insulin glargine (IG). Hydrophobic ion pairs (HIPs) of IG are formed using various counterions. HIPs are assessed for log P octanol/water and dissociation behavior. They are incorporated into SEDDS based on polyglycerol (PG) and zwitterionic surfactant (ZW) using response surface methodology and compared to conventional PEG-SEDDS in size, stability, and log D SEDDS/release medium. Oral IG bioavailability in PG/ZW-SEDDS and PEG-SEDDS is evaluated in rats. Among the various counterions studied, IG-BIS (bis(isotridecyl)sulfosuccinate) HIPs demonstrated the highest log P and an improved dissociation profile. PG/ZW-SEDDS and PEG-SEDDS have similar ≈40 nm sizes and are stable over 24 h. Both formulations have log D > 4 in water and >2 in 50 mM phosphate buffer pH 6.8. PG/ZW-SEDDS yielded an oral bioavailability of 2.13 ± 0.66% for IG, while the employment of PEG-SEDDS resulted in an oral bioavailability of 1.15 ± 0.35%. This study highlights the prospective utilization of PEG-free SEDDS involving the concurrent application of PG and ZW surfactants, an alternative to conventional PEG surfactants, for improved oral therapeutic (poly) peptide delivery.

Thiolated Cellulose: A Dual-Acting Mucoadhesive and Permeation-Enhancing Polymer.

This study aims to design an anionic, thiolated cellulose derivative and to evaluate its mucoadhesive and permeation-enhancing properties utilizing enoxaparin as a model drug. 2-Mercaptosuccinic acid-modified cellulose (cellulose-mercaptosuccinate) was synthesized by the reaction of cellulose with S-acetylmercaptosuccinic anhydride. The chemical structure of the target compound was confirmed by FTIR and 1H NMR spectroscopy. The thiol content was determined by Ellman's test. The conjugate exhibited 215.5 ± 25 µmol/g of thiol groups and 84 ± 16 µmol/g of disulfide bonds. Because of thiolation, mucoadhesion on porcine intestinal mucosa was 9.6-fold enhanced. The apparent permeability (Papp) of the model dye Lucifer yellow was up to 2.2-fold improved by 0.5% cellulose-mercaptosuccinate on a Caco-2 cell monolayer. Enoxaparin permeation through rat intestinal mucosa increased 2.4-fold in the presence of 0.5% cellulose-mercaptosuccinate compared with the drug in buffer only. In vivo studies in rats showed an oral bioavailability of 8.98% using cellulose-mercaptosuccinate, which was 12.5-fold higher than that of the aqueous solution of the drug. Results of this study show that the modification of cellulose with 2-mercaptosuccinic acid provides mucoadhesive and permeation-enhancing properties, making this thiolated polymer an attractive excipient for oral drug delivery.

Thiolated Chitosans: A Multi-talented Class of Polymers for Various Applications.

Various properties of chitosan can be customized by thiolation for very specific needs in a wide range of application areas. Since the discovery of thiolated chitosans, many studies have proven their advantageous characteristics, such as adhesion to biological surfaces, adjustable cross-linking and swelling behavior, controllable drug release, permeation as well as cellular uptake enhancement, inhibition of efflux pumps and enzymes, complexation of metal ions, antioxidative properties, and radical scavenging activity. Simultaneously, these polymers remain biodegradable without increased toxicity. Within this Review, an overview about the different possibilities to covalently attach sulfhydryl ligands to the polymeric backbone of chitosan is given, and the resulting versatile physiochemical properties are discussed in detail. Furthermore, the broad spectrum of applications for thiolated chitosans in science and industry, ranging from their most advanced use in pharmaceutical and medical science over wastewater treatment to the impregnation of textiles, is addressed.

Self-Emulsifying Drug Delivery Systems: Hydrophobic Drug Polymer Complexes Provide a Sustained Release in Vitro.

The aim of this study was to develop hydrophobic ionic drug polymer complexes in order to provide sustained drug release from self-emulsifying drug delivery systems (SEDDS). Captopril (CTL) was used as an anionic model drug to form ionic complexes with the cationic polymers Eudragit RS, RL, and E. Complexes of polymer to CTL charge ratio 1:1, 2:1, and 4:1 were incorporated in two SEDDS, namely FA which was 40% Kolliphor RH 40, 20% Kolliphor EL, and 40% castor oil and FB, which was 40% Kolliphor RH 40, 30% glycerol, 15% Kolliphor EL, and 15% castor oil. Blank and complex loaded SEDDS were characterized regarding their droplet size, polydispersity index (PDI), and zeta potential. Resazurin assay was performed on Caco-2 cells to evaluate the biocompatibility of SEDDS. Release of CTL from SEDDS was determined in release medium containing 0.2 mg/mL of 5,5'-dithiobis(2-nitrobenzoic acid) (DNTB) allowing quantification of free drug released into solution via a thiol/disulfide exchange reaction between CTL and DNTB forming a yellow dye. The droplet size of SEDDS FA and SEDDS FB were in the range of 100 ± 20 nm and 40 ± 10 nm, respectively, with a PDI < 0.5. The zeta potential of SEDDS FA and SEDDS FB increased after the incorporation of complexes. Cell viability remained above 80% after incubation with SEDDS FA and SEDDS FB in a concentration of 1% and 3% for 4 h. Without any polymer, CTL was entirely released from both SEDDS within seconds. In contrast, the higher the cationic lipophilic polymer to CTL ratio in SEDDS, the more sustained was the release of CTL. Among the polymers which were evaluated, Eudragit RL provided the most sustained release. SEDDS FA containing Eudragit RL and CTL in a ratio of 1:1 released 64.78 ± 8.28% of CTL, whereas SEDDS FB containing the same complex showed a release of 91.85 ± 1.17% within 1 h. Due to the formation of lipophilic ionic polymer complexes a sustained drug release from oily droplets formed by SEDDS can be achieved. Taking into account that drugs are otherwise instantly released from SEDDS, results of this study might open the door for numerous additional applications of SEDDS for which a sustained drug release is essential.

Lipophilic Arginine Esters: The Gateway to Preservatives without Side Effects.

This study hypothesized that long carbon chain cationic arginine (Arg) esters can be considered as toxicologically harmless preservatives. Arg-esters with C18 and C24 carbon chains, namely, arginine-oleate (Arg-OL) and arginine-decyltetradecanoate (Arg-DT), were synthesized. Structures were confirmed by FT-IR, 1H NMR, and mass spectroscopy. Both Arg-esters were tested regarding hydrophobicity in terms of log Poctanol/water, critical micelle concentration (CMC), biodegradability, cytotoxicity, hemolysis, and antimicrobial activity against Escherichiacoli (E. coli), Staphylococcusaureus (S. aureus), Bacillussubtilis (B. subtilis), and Enterococcusfaecalis (E. faecalis). Log Poctanol/water of arginine was raised from -1.9 to 0.3 and 0.6 due to the attachment of C18 and C24 carbon chains, respectively. The critical micelle concentration of Arg-OL and Arg-DT was 0.52 and 0.013 mM, respectively. Both Arg-esters were biodegradable by porcine pancreatic lipase. In comparison to the well-established antimicrobials, benzalkonium chloride (BAC) and cetrimide, Arg-esters showed significantly less cytotoxic and hemolytic activity. Both esters exhibited pronounced antimicrobial properties against Gram-positive and Gram-negative bacteria comparable to that of BAC and cetrimide. The minimum inhibitory concentration (MIC) of Arg-esters was <50 µg mL-1 against all tested microbes. Overall, results showed a high potential of Arg-esters with long carbon chains as toxicologically harmless novel preservatives.

Thiolated PVP-Amphotericin B Complexes: An Innovative Approach toward Highly Mucoadhesive Gels for Mucosal Leishmaniasis Treatment.

The aim of this study was to synthesize polymeric excipients that can form mucoadhesive hydrogels containing amphotericin B (AmB) for the treatment of mucosal leishmaniasis. 2-(2-Acryloylaminoethyldisulfanyl)-nicotinic acid (ACENA) was copolymerized with N-vinyl pyrrolidone to obtain thiolated polyvinylpyrrolidone (PVP) that was then complexed with AmB to improve its solubility. The resulting structure of thiolated PVP was evaluated by 1H nuclear magnetic resonance to confirm S-protected thiol groups, and the average molecular mass was determined by size exclusion chromatography. Moreover, variants of thiolated PVP-AmB were studied for the thiol content, amount of complexed AmB, cytotoxicity, mucoadhesive properties, and antileishmaniasis activity. The highest achieved degree of thiolation was 772 ± 24.64 µmol/g, and the amount of complexed AmB was 27.05 ± 0.31 µmol per g of polymer. Thiolated PVP and thiolated PVP-AmB variants (0.5% m/v) showed no cytotoxicity, whereas the equivalent concentration of free AmB reduced Caco-2 cell viability to 70% within 24 h. Thiol-functionalized PVP and PVP-AmB complexes displayed 7.66- and 7.20-fold higher adhesion to the mucosal surface in comparison to unmodified PVP and PVP-AmB, respectively. In addition, variants of thiolated PVP-AmB complexes displayed 100% antileishmaniasis activity in comparison to the 80% killing efficiency of Fungizone, which has been applied in the equivalent AmB concentration of 0.2 µg/mL. Thiol-functionalized PVP proved to be a promising novel excipient for the delivery of AmB providing enhanced solubility and improved mucoadhesive properties which are beneficial for the treatment of mucosal leishmaniasis.

In Vitro-in Vivo Correlation of Mucoadhesion Studies on Buccal Mucosa.

BACKGROUND: For the development of novel buccoadhesive formulations, their physicochemical properties, strength of the interfacial joint, and residence time on the buccal mucosa are considered as a measure for their in vivo mucoadhesive properties. Focusing on these parameters, the predictive power of established in vitro systems was assessed for mucoadhesive properties in humans using discs as the model solid dosage form. METHODS: Compressed into discs, hydroxyethyl cellulose, carboxymethyl cellulose, carbopol, polycarbophil, alginate, and xanthan gum were used as model polymers. Mucosal residence time, maximum detachment force (MDF), and total work of adhesion (TWA) were determined ex vivo on the porcine buccal mucosa and in vivo on healthy volunteers. The impact of detachment velocity, humidification, and experimental set-up employed for tensile studies was examined and correlated to in vivo studies. RESULTS: Ex vivo results for mucosal residence time showed a very high correlation ( r = 0.997) with data obtained in vivo. For tensile studies, a set-up optimized for moistening the interface, speed, and alignment of the tensile force provided ex vivo results with very high correlation to in vivo experiments with r = 0.983 obtained for MDF and r = 0.973 for TWA, respectively. CONCLUSIONS: Experimental set-ups for the determination of mucosal residence time and tensile studies could be identified as valid methods for the development of intraoral solid dosage forms.

Zeta Potential Changing Polyphosphate Nanoparticles: A Promising Approach To Overcome the Mucus and Epithelial Barrier.

The aim of the present study was to develop zeta potential-changing polyphosphate nanoparticles (pp-NPs) in order to overcome the diffusion barrier of the mucus gel layer and to provide an enhanced cellular uptake. pp-NPs were obtained by in situ gelation between cationic polyethylene imine and anionic polyphosphate. The resulting pp-NPs were characterized with regard to size and zeta potential. Phosphate release studies were carried out by incubation of pp-NPs with isolated as well as cell-associated intestinal alkaline phosphatase (IAP) and quantified by malachite green assay. Correspondingly, change in the zeta potential was measured, and pp-NPs were analyzed by scanning electron microscopy studies. Mucus permeation studies were performed with porcine intestinal mucus via the transwell insert method and rotating tube method. Furthermore, cell viability and cellular uptake were investigated on Caco-2 cells. The resulting pp-NPs displayed a mean size of 269.16 ± 1.12 nm and a zeta potential between -9 and -10 mV in the characterization studies. Within 4 h, a remarkable amount of phosphate was released from pp-NPs incubated with isolated IAP as well as cell-associated IAP and zeta potential raised up from -9.14 ± 0.45 to -1.75 ± 0.46 mV. Compared with dephosphorylated polyphosphate nanoparticles (de-pp-NPs), a significantly enhanced mucus permeation of pp-NPs was observed. Moreover, pp-NPs did not exhibit cytotoxicity. Cellular uptake increased 2.6-fold by conversion of pp-NPs to de-pp-NPs following enzymatic cleavage. Taking the comparatively simple preparation method and the high mucus-permeating properties of pp-NPs and high cellular uptake properties of de-pp-NPs into account, these nanocarriers might be promising novel tools for mucosal drug delivery.

N-Hydroxysulfosuccinimide Esters versus Thiomers: A Comparative Study Regarding Mucoadhesiveness.

The objective of the study was to compare poly(acrylic acid)- N-hydroxysulfosuccinimide reactive esters (PAA-Sulfo-NHS) and poly(acrylic acid)-cysteine conjugates (PAA-Cys) regarding their mucoadhesiveness. Polymer conjugates were synthesized in a water free environment and characterized by UV-vis spectroscopy and FTIR. Water uptake studies were performed, and the polymers were further examined for their mucoadhesive properties and cohesiveness using the rotating cylinder method. Tensile force measurements were conducted to define the strength of adhesion to porcine intestinal mucosa. Additionally, polymer-mucus mixtures were assessed for rheological synergism by measuring the increase in dynamic viscosity. Both modifications led to a prolonged adhesion time compared to unmodified PAA. Fast dissolution of PAA-Sulfo-NHS derivatives was monitored, whereas PAA-Cys tended to extensively swell while exhibiting high cohesive properties. Measurements of tensile force revealed up to 2.7-fold (PAA-Sulfo-NHS) and 2.3-fold (PAA-Cys) enhancement of the maximum detachment force and 7.6-fold (PAA-Sulfo-NHS) and 3.6-fold (PAA-Cys) increase in the total work of adhesion. Formation of a gel network between polymer and mucus was confirmed by a 10.8-fold (PAA-Sulfo-NHS) and 20.8-fold (PAA-Cys) increase in viscosity. Both types of polymers show high mucoadhesive properties due to the formation of covalent bonds with the mucus. As thiolated polymers are capable of forming stabilizing disulfide bonds within their polymeric network, they are advantageous over PAA-Sulfo-NHS.

Synthesis and Characterization of Thiolated PVP-Iodine Complexes: Key to Highly Mucoadhesive Antimicrobial Gels.

The aim of this study was to synthesize iodine containing polymeric excipients for mucosal treatment of microbial infection exhibiting a prolonged mucosal residence time by forming an adhesive gel on the mucosal surface. In order to achieve this aim, 2-(2 acryloylamino-ethyldisulfanyl)-nicotinic acid (ACENA) was copolymerized with N-vinylpyrrolidone (NVP) to obtain thiolated polyvinylpyrrolidone (PVP) for complexation with iodine. The average molecular mass of different thiolated PVP variants was determined by size exclusion chromatography. The structure of thiolated PVP was confirmed by 1H NMR. Thiolated PVP variants were characterized for thiol content, cytotoxicity, iodine loading capacity, rheological behavior, and adhesion time on mucosa. The highest achieved degree of thiolation was 610 ± 43 µmol/g, and the maximum recorded iodine loading was 949 ± 31 µmol/g of polymer. Thiolated PVP variants (0.5% m/v) showed no toxicity after incubation on Caco-2 cells for the period of 3 and 24 h, respectively. Thiolated PVP and thiolated PVP-iodine complexes exhibited a 5.4- and 4.4-fold increased dynamic viscosity in porcine mucus in comparison to PVP and PVP-iodine complex, respectively. Compared to PVP and PVP-iodine complex thiol-functionalized PVP and PVP-iodine complexes demonstrated significantly prolonged attachment to mucosal surface over a period of 3 h. Thiol functionalized PVP proved to be a promising novel excipient for complexation with iodine and to exhibit strongly improved mucoadhesive properties.

Chitosan: The One and Only? Aminated Cellulose as an Innovative Option for Primary Amino Groups Containing Polymers.

The aim of this study was the synthesis and in vitro characterization of aminated cellulose as alternative excipient to chitosan. The aldehyde form of cellulose was generated via the oxidative cleavage of vicinal diols by the addition of increasing concentrations of sodium periodate. The insertion of primary amines was achieved by reductive amination with ammonia. The degree of substitution was calculated via primary amino group quantification using a 2,4,6-trinitrobenzenesulfonic acid assay. Mucoadhesiveness was examined by adopting the rotating-cylinder method and tensile studies using porcine intestinal mucosa. Hydration was evaluated at pH 2-11. The successful formation of aldehydes as well as a subsequent introduction of up to 311.61 micromoles per gram of primary amines were proven to correlate with the amount of added periodate. There was a 3- to 14-fold prolongation in the mucosal residence time of the new polymer in comparison to chitosan, as measured by the rotating-cylinder method. Although cationic cellulose did not reach the maximum detachment force of chitosan, the total work of adhesion of the newly synthesized cellulose derivate was higher than that of chitosan. The higher the degree of amination, the higher the degree of hydration in neutral and alkaline aqueous media was. Compared to chitosan, the novel cationic cellulose derivative displays improved mucoadhesive properties as well as sufficient hydration at physiological pH. Therefore, aminated cellulose is a promising alternative to the cationic polymers, such as chitosan, used thus far.

Combination of SEDDS and Preactivated Thiomer Technology: Incorporation of a Preactivated Thiolated Amphiphilic Polymer into Self-Emulsifying Delivery Systems.

PURPOSE: The aim of the study was to create novel mucoadhesive drug delivery systems by incorporating amphiphilic hydrophobically modified, thiolated and preactivated polymers (preactivated thiomers) into self-emulsifying drug delivery systems (SEDDS). METHODS: L-Cysteine methyl ester was covalently attached to the polymeric backbone of Pemulen TR-2 and preactivated using 2-mercaptonicotinic acid (2-MNA). These thiomers were incorporated in a concentration of 0.3% (w/v) into SEDDS. The size distribution and the zeta potential of the emulsions were evaluated by dynamic light scattering. Mucoadhesive properties of thiomers-SEDDS spiked with FDA (fluorescein diacetate) were examined utilizing rheological measurement, permeation studies and in vitro residence time study on porcine mucosa. Cell viability tests were additionally performed. RESULTS: 734 ± 58 µmol L-Cysteine methyl ester and 562 ± 71 µmol 2-MNA could be attached per gram polymer of Pemulen TR-2. Emulsions exhibited a droplet size range between 180 and 270 nm. Blank SEDDS possessed a zeta potential value between -5.7 and -8.6 mV, whereas thiomers-SEDDS between -14.6 and -17.2 mV. Viscous modulus of thiomer and preactivated thiomer containing SEDDS-mucus mixture was 8-fold and 11-fold increased in comparison to reference. The amount of FDA permeated the mucus layer was 2-fold lower in case of thiomers-SEDDS compared to blank SEDDS. A prolonged residence time was observed for thiomers-SEDDS over 45 min. During cell viability studies no severe toxic effects were detected. CONCLUSION: The novel developed SEDDS with incorporated thiomers might be a promising tool for mucoadhesive oral drug delivery.

Thiolated polymers: evaluation of their potential as dermoadhesive excipients.

The objective of this study was to evaluate and compare four different thiolated polymers regarding their dermoadhesive potential. Therefore, three hydrophilic polymers (poly(acrylic acid), Carbopol 971 and carboxymethylcellulose) and a lipophilic polymer (silicone oil) were chosen to generate thiolated polymers followed by characterization. The total work of adhesion (TWA) and the maximum detachment force (MDF) of formulations containing modified and unmodified polymers were investigated on skin obtained from pig ears using a tensile sandwich technique. The synthesis of thiolated polymers provided 564 µmol, 1079 µmol, 482 µmol and 217 µmol thiol groups per gram poly(acrylic acid), Carbopol 971, carboxymethylcellulose and silicone oil, respectively. Hydrogels containing poly(acrylic acid)-cysteine, Carbopol 971-cysteine, and carboxymethylcellulose-cysteamine exhibited a 6-fold, 25-fold and 9-fold prolonged adhesion on porcine skin than the hydrogel formulations prepared from the corresponding unmodified polymers, respectively. Furthermore, thiolation of silicone oil with thioglycolic acid led to a 5-fold improvement in adhesion compared to the unmodified silicone oil. A comparison between the four thiolated polymer formulations showed a clear correlation between the amount of coupled thiol groups and the TWA. According to these results thiomers might also be useful excipients to provide a prolonged dermal resistance time of various formulations.

Development and in vitro characterization of self-emulsifying drug delivery system (SEDDS) for oral opioid peptide delivery.

AIM: In this study, self-emulsifying drug delivery system (SEDDS) for oral delivery of opioid peptide dalargin were developed and characterized in vitro. METHODS: Dalargin lipophilicity was increased by O-esterification of tyrosine OH group, hydrophobic ion pairing, or a combination thereof. Distribution coefficients (log D) of lipidized dalargin derivatives were determined. Then, dalargin was incorporated in chosen SEDDS, namely SEDDS-1, composed of 50% Capmul 907, 40% Cremophor EL, and 10% propylene glycol and comparatively more lipophilic SEDDS-2 composed of 30% Captex 8000, 30% Capmul MCM, 30% Cremophor EL, and 10% propylene glycol. Additionally, SEDDS were characterized regarding droplet size, polydispersity index (PDI), cloudy point, physical stability and stability against pancreatic lipase. Furthermore, mucus permeating properties of SEDDS and their ability to protect the incorporated dalargin against proteolysis by trypsin, α-chymotrypsin, elastase, simulated gastric fluid (SGF), and simulated intestinal fluid (SIF) were evaluated. RESULTS: The highest dalargin drug payload of 4.57% in SEDDS-2 was achieved when dalargin palmitate (pDAL) was ion paired with sodium dodecyl sulfate (SDS) in molar ratio 1:1. Moreover, SEDDS-1 and SEDDS-2 had a narrow droplet size distribution with average droplet sizes of 42.1 and 33.1 nm with PDI of 0.042 and 0.034, respectively. Lipolysis study showed that within 30 min 78.5% of SEDDS-1 and 92.1% of SEDDS-2 were digested. In addition, both SEDDS exhibited mucus permeating properties as well as a protective effect against enzymatic degradation by trypsin, α-chymotrypsin, elastase, SGF and SIF. CONCLUSION: The results of this study suggest that the developed SEDDS could be considered for oral opioid peptide delivery.

Assembly and in vitro characterization of thiomeric nanoparticles.

The present study focused on the assembly of an insulin exhibiting, nanoparticulate formulation and the characterization thereof regarding particle size, zeta potential and stability of nanoparticles as well as mucoadhesion indicating, turbidity measurements and drug release studies after particle purification. The preparation was performed in the presence of insulin due to the formation of hydrogen bonds between poly(vinyl pyrrolidone) (PVP) and poly(acrylic acid) (PAA) or its conjugate poly(acrylic acid)-cysteine (PAA-Cys) with a molecular mass of 100 as well as 450 kDa. Stable suspensions, displaying nanoparticles with a mean particle size in the range of 200 nm as well as a negative zeta potential, were achieved with 100 kDa poly(acrylic acid) (PAA100) or poly(acrylic acid)-cysteine (PAA100-Cys). Turbidity measurements displayed a pH dependent interaction of nanoparticulate material and mucin leading to a greater and earlier interference at pH 3.9 compared to pH 7.4. Moreover a 1.2-fold increase of the absorbance of nanoparticle-mucin dispersions compared to mucin control was observed after 3 h. The introduced particulate drug delivery system might in conclusion display a sophisticated vehicle for the non-invasive delivery of insulin and other peptide drugs.

Can thiolation render a low molecular weight polymer of just 20-kDa mucoadhesive?

The objective was to investigate whether even low-molecular weight polymers (LMWPs) can be rendered mucoadhesive due to thiolation. Interceded by the double catalytic system carbodiimide/N-hydroxysuccinimide, cysteamine was covalently attached to a copolymer, poly(4-styrenesulfonic acid-co-maleic acid) (PSSA-MA) exhibiting a molecular weight of just 20 kDa. Depending on the amount of added N-hydroxysuccinimide and cysteamine, the resulting PSSA-MA-cysteamine (PC) conjugates exhibited increasing degree of thiolation, highest being "PC 2300" exhibiting 2300.16 ± 149.86 µmol thiol groups per gram of polymer (mean ± SD; n = 3). This newly developed thiolated polymer was evaluated regarding mucoadhesive, rheological and drug release properties as well from the toxicological point of view. Swelling behavior in 100 mM phosphate buffer pH 6.8 was improved up to 180-fold. Furthermore, due to thiolation, the mucoadhesive properties of the polymer were 240-fold improved. Rheological measurements of polymer/mucus mixtures confirmed results obtained by mucoadhesion studies. In comparison to unmodified polymer, PC 2300 showed 2.3-, 2.3- and 2.4-fold increase in dynamic viscosity, elastic modulus and viscous modulus, respectively. Sustained release of the model drug codeine HCl out of the thiomer was provided for 2.5 h (p < 0.05), whereas the drug was immediately released from the unmodified polymer. Moreover, the thiomer was found non-toxic over Caco-2 cells for a period of 6- and 24-h exposure. Findings of the present study provide evidence that due to thiolation LMWPs can be rendered highly mucoadhesive as well as cohesive and that a controlled drug release out of such polymers can be provided.

Development of thiolated poly(acrylic acid) microparticles for the nasal administration of exenatide.

The purpose of this study was to develop a microparticulate formulation for nasal delivery of exenatide utilizing a thiolated polymer. Poly(acrylic acid)-cysteine (PAA-cys) and unmodified PAA microparticles loaded with exenatide were prepared via coprecipitation of the drug and the polymer followed by micronization. Particle size, drug load and release of incorporated exenatide were evaluated. Permeation enhancing properties of the formulations were investigated on excised porcine respiratory mucosa. The viability of the mucosa was investigated by histological studies. Furthermore, ciliary beat frequency (CBF) studies were performed. Microparticles displayed a mean size of 70-80 µm. Drug encapsulation was ∼80% for both thiolated and non-thiolated microparticles. Exenatide was released from both thiolated and non-thiolated particles in comparison to exenatide in buffer only within 40 min. As compared to exenatide dissolved in buffer only, non-thiolated and thiolated microparticles resulted in a 2.6- and 4.7-fold uptake, respectively. Histological studies performed before and after permeation studies showed that the mucosa is not damaged during permeation studies. CBF studies showed that the formulations were cilio-friendly. Based on these results, poly(acrylic acid)-cysteine-based microparticles seem to be a promising approach starting point for the nasal delivery of exenatide.

Mucoadhesive polymers: Design of S-protected thiolated cyclodextrin-based hydrogels.

AIM: This study aims to design chemically crosslinked thiolated cyclodextrin-based hydrogels and to evaluate their mucoadhesive properties via mucosal residence time studies on porcine small intestinal mucosa and on porcine buccal mucosa. METHODS: Free thiol groups of heptakis(6-deoxy-6-thio)-ß-cyclodextrin (ß-CD-SH) were S-protected with 2-mercaptoethanesulfonic acid (MESNA) followed by crosslinking with citric acid. Cytotoxicity was assessed by hemolysis as well as resazurin assay. Hydrogels were characterized by their rheological and mucoadhesive properties. Ritonavir was employed as model drug for in vitro release studies from these hydrogels. RESULTS: The structure of S-protected ß-CD-SH was confirmed by IR and 1H NMR spectroscopy. Degree of thiolation was 390 ± 7 µmol/g. Hydrogels based on native ß-CD showed hemolysis of 12.5 ± 2.5 % and 13.6 ± 2.7 % within 1 and 3 h, whereas hemolysis of just 3.5 ± 2.8 % and 3.9 ± 3.0 % was observed for the S-protected thiolated CD hydrogels, respectively. Both native and S-protected thiolated hydrogels showed minor cytotoxicity on Caco-2 cells. Rheological investigations of S-protected thiolated ß-CD-based hydrogel (16.2 % m/v) showed an up to 13-fold increase in viscosity in contrast to the corresponding native ß-CD-based hydrogel. Mucosal residence time studies showed that thiolated ß-CD-based hydrogel is removed to a 16.6- and 2.4-fold lower extent from porcine small intestinal mucosa and porcine buccal mucosa in comparision to the native ß-CD-based hydrogel, respectively. Furthermore, a sustained release of ritonavir from S-protected thiolated ß-CD-based hydrogels was observed. CONCLUSION: Because of their comparatively high mucoadhesive and release-controlling properties, S-protected thiolated ß-CD-based hydrogels might be promising systems for mucosal drug delivery.

Preparation and characterization of PVA/chitosan nanofibers loaded with Dragon's blood or poly helixan as wound dressings.

Nanofibers have been investigated in regenerative medicine. Dragon's blood (DB)- and poly helixan PF (PHPF) are natural materials used in cosmetics. Herein, we generated DB- and PHPF-loaded polyvinyl alcohol/chitosan (PVA/CS/DB and PVA/CS/PHPF, respectively) nanofibers. PVA/CS/DB and PVA/CS/PHPF nanofibers had an average diameter of 547.5 ± 17.13 and 521 ± 24.67 nm, respectively as assessed by SEM, and a degradation rate of 43.1 and 47.6 % after 14 days, respectively. PVA/CS/DB and PVA/CS/PHPF nanofibers had a hemolysis rate of 0.10 and 0.39 %, respectively, and a water vapor transmission rate of ∼2200 g.m-2.day-1. These nanofibers exhibited favorable antimicrobial activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis in vitro. PVA/CS/DB and PVA/CS/PHPF nanofibers demonstrated a sustained release of 77.91 and 76.55 % over 72 h. PVA/CS/DB and PVA/CS/PHPF nanofibers had a high rate of cytocompatibility and significantly improved the viability of NIH/3T3 cells as compared with free drugs or unloaded nanofibers. Histological inspection via H&E and Verhoeff's staining demonstrated PVA/CS/DB and PVA/CS/PHPF nanofibers enhanced the wound healing and damaged tissue recovery of unsplinted wound models by promoting epithelial layer formation, collagen deposition, and enhancing the presence of fibroblasts. Conclusively, PVA/CS/DB and PVA/CS/PHPF can be introduced as potential wound dressing candidates with favorable properties.

Therapeutic effect of 5-ASA and hesperidin-loaded chitosan/Eudragit® S100 nanoparticles as a pH-sensitive carrier for local targeted drug delivery in a rat model of ulcerative colitis.

Ulcerative colitis (UC) is an idiopathic disease characterized by colonic mucosal tissue destruction secondary to an excessive immune response. We synthesized pH-sensitive cross-linked chitosan/Eudragit® S100 nanoparticles (EU S100/CS NPs) as carriers for 5-aminosalicylic acid (5-ASA) and hesperidin (HSP), then conducted in-vitro and in-vivo studies and evaluated the therapeutic effects. In-vitro analysis revealed that the 5-ASA-loaded EU S100/CS NPs and the HSP-loaded EU S100/CS NPs had smooth and curved surfaces and ranged in size between 250 and 300 nm, with a zeta potential of 32 to 34 mV. FTIR analysis demonstrated that the drugs were loaded on the nanoparticles without significant alterations. The loading capacity and encapsulation efficiency of loading 5-ASA onto EU S100/CS NPs were 25.13 % and 60.81 %, respectively. Regarding HSP, these values were 38.34 % and 77.84 %, respectively. Drug release did not occur in simulated gastric fluid (SGF), while a slow-release pattern was recorded for both drugs in simulated intestinal fluid (SIF). In-vivo macroscopic and histopathological examinations revealed that both NPs containing drugs significantly relieved the symptoms of acetic acid (AA)-induced UC in Wistar rats. We conclude that the synthesized pH-sensitive 5-ASA/EU S100/CS NPs and HSP/EU S100/CS NPs offer promise in treating UC.