Succession of biochar addition for soil amendment and contaminants remediation during co-composting: A state of art review.

This paper aimed to highlight the succession of biochar addition for soil amendment and contaminants remediation during composting process. Biochar incorporated into the compost mixture promotes composting performance and enhances contaminants reduction. Co-composting with biochar for soil biota has been demonstrated via modified soil biological community abundance and diversity. On the other hand, adverse alterations to soil properties were noted, which had a negative impact on the communication of microbe-to-plant interactions within the rhizosphere. As a result, these changes influenced the competition between soilborne pathogens and beneficial soil microorganisms. Co-composting with biochar promoted the heavy metals (HMs) remediation efficiency in contaminated soils by around 66-95%. Notably, applying biochar during composting could improve nutrient retention and mitigate leaching. The adsorption of nutrients such as nitrogen and phosphorus compounds by biochar can be applied to manage environmental contamination and presents an excellent opportunity to enhance soil quality. Additionally, the various specific functional groups and large specific surface areas of biochar allow for excellent adsorption of persistent pollutants (e.g., pesticides, polychlorinated biphenyls (PCBs)) and emerging organic pollutants, such as microplastic, phthalate acid esters (PAEs) during co-composting. Finally, future perspectives, research gaps, and recommendations for further studies are highlighted, and potential opportunities are discussed.

Effectiveness of the engineered pinecone-derived biochar for the removal of fluoride from water.

Drinking fluoride (F-)-contaminated water (>1.5 mg L-1) causes severe dental and skeletal disorders. In the central province of Pakistan, ∼20 times higher levels of F- in the drinking groundwater (compared with the 1.5 mg L-1 permissible limit of the World Health Organization) are triggering bone abnormalities in teenagers. In this study, we demonstrated the potential of pinecone-derived biochar (pristine) impregnated with Fe- and Al-salts (engineered) to defluoridate water. Batch mode adsorption experiments were carried out under variable conditions of solution pH, F- initial concentration, adsorbent dose, and contact time. The engineered biochars resulted in greater adsorption than that of pristine biochar. Specifically, the AlCl3-modified biochar exhibited a maximum adsorption capacity of 14.07 mg g-1 in spiked water and 13.07 mg g-1 in in-situ groundwater. The equilibrium isothermal and kinetic models predicted monolayer, cooperative, and chemisorption types of the adsorption process. The chemical interaction and outer-sphere complexation of F- with Al, Na, and H elements were further confirmed by the post-adsorption analysis of the AlCl3-modified biochar by FTIR and XRD. The AlCl3-modified biochar resulted in 87.13% removal of F- from the in-situ F--contaminated groundwater, even in the presence of naturally occurring competing ions (such as Cl-, HCO3-, SO42-, and NO3-). We conclude that the AlCl3-modified biochar derived from pinecone could be a promising cost-effective adsorbent for the defluoridation of water.

Challenges and opportunities in sustainable management of microplastics and nanoplastics in the environment.

The accumulation of microplastics (MPs) and nanoplastics (NPs) in terrestrial and aquatic ecosystems has raised concerns because of their adverse effects on ecosystem functions and human health. Plastic waste management has become a universal problem in recent years. Hence, sustainable plastic waste management techniques are vital for achieving the United Nations Sustainable Development Goals. Although many reviews have focused on the occurrence and impact of micro- and nanoplastics (MNPs), there has been limited focus on the management of MNPs. This review first summarizes the ecotoxicological impacts of plastic waste sources and issues related to the sustainable management of MNPs in the environment. This paper then critically evaluates possible approaches for incorporating plastics into the circular economy in order to cope with the problem of plastics. Pollution associated with MNPs can be tackled through source reduction, incorporation of plastics into the circular economy, and suitable waste management. Appropriate infrastructure development, waste valorization, and economically sound plastic waste management techniques and viable alternatives are essential for reducing MNPs in the environment. Policymakers must pay more attention to this critical issue and implement appropriate environmental regulations to achieve environmental sustainability.

Are microplastics destabilizing the global network of terrestrial and aquatic ecosystem services?

Plastic has created a new man-made ecosystem called plastisphere. The plastic pieces including microplastics (MPs) and nanoplastics (NPs) have emerged as a global concern due to their omnipresence in ecosystems and their ability to interact with the biological systems. Nevertheless, the long-term impacts of MPs on biotic and abiotic resources are not completely understood, and existing evidence suggests that MPs are hazardous to various keystones species of the global biomes. MP-contaminated ecosystems show reduced floral and faunal biomass, productivity, nitrogen cycling, oxygen-generation and carbon sequestration, suggesting that MPs have already started affecting ecological biomes. However, not much is known about the influence of MPs towards the ecosystem services (ESs) cascade and its correlation with the biodiversity loss. MPs are perceived as a menace to the global ecosystems, but their possible impacts on the provisional, regulatory, and socio-economic ESs have not been extensively studied. This review investigates not only the potentiality of MPs to perturb the functioning of terrestrial and aquatic biomes, but also the associated social, ecological and economic repercussions. The possible long-term fluxes in the ES network of terrestrial and aquatic niches are also discussed.

Exploring the hidden environmental pollution of microplastics derived from bioplastics: A review.

Bioplastics might be an ecofriendly alternative to traditional plastics. However, recent studies have emphasized that even bioplastics can end up becoming micro- and nano-plastics due to their degradation under ambient environmental conditions. Hence, there is an urgent need to assess the hidden environmental pollution caused by bioplastics. However, little is known about the evolutionary trends of bibliographic data, degradation pathways, formation, and toxicity of micro- and nano-scaled bioplastics originating from biodegradable polymers such as polylactic acid, polyhydroxyalkanoates, and starch-based plastics. Therefore, the prime objective of the current review was to investigate evolutionary trends and the latest advancements in the field of micro-bioplastic pollution. Additionally, it aims to confront the limitations of existing research on microplastic pollution derived from the degradation of bioplastic wastes, and to understand what is needed in future research. The literature survey revealed that research focusing on micro- and nano-bioplastics has begun since 2012. This review identifies novel insights into microbioplastics formation through diverse degradation pathways, including photo-oxidation, ozone-induced degradation, mechanochemical degradation, biodegradation, thermal, and catalytic degradation. Critical research gaps are identified, including defining optimal environmental conditions for complete degradation of diverse bioplastics, exploring micro- and nano-bioplastics formation in natural environments, investigating the global occurrence and distribution of these particles in diverse ecosystems, assessing toxic substances released during bioplastics degradation, and bridging the disparity between laboratory studies and real-world applications. By identifying new trends and knowledge gaps, this study lays the groundwork for future investigations and sustainable solutions in the realm of sustainable management of bioplastic wastes.

Possible hazards from biodegradation of soil plastic mulch: Increases in microplastics and CO2 emissions.

Biodegradable mulches are widely recognized as ecologically friendly substances. However, their degradation percentage upon entering soils may vary based on mulch type and soil microbial activities, raising concerns about potential increases in microplastics (MPs). The effects of using different types of mulch on soil carbon pools and its potential to accelerate their depletion have not yet well understood. Therefore, we conducted an 18-month experiment to investigate mulch biodegradation and its effects on CO2 emissions. The experiment included burying soil with biodegradable mulch made of polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT), and control treatments with traditional mulch (PE) and no mulch (CK). The results indicated that PE did not degrade, and the degradation percentage of PLA and PBAT were 46.2% and 88.1%, and the MPs produced by the degradation were 6.7 × 104 and 37.2 × 104 items/m2, respectively. Biodegradable mulch, particularly PLA, can enhance soil microbial diversity and foster more intricate bacterial communities compared to PE. The CO2 emissions were 0.58, 0.74, 0.99, and 0.86 g C/kg in CK, PE, PLA, , PBAT, respectively. A positive correlation was observed between microbial abundance and diversity with CO2 emissions, while a negative correlation was observed with soil total organic carbon. Biodegradable mulch enhanced the transformation of soil organic C into CO2 by stimulating microbial activity.

Various additive release from microplastics and their toxicity in aquatic environments.

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

Effects of microplastics on soil microorganisms and microbial functions in nutrients and carbon cycling - A review.

The harmful effects of microplastics (MPs) pollution in the soil ecosystem have drawn global attention in recent years. This paper critically reviews the effects of MPs on soil microbial diversity and functions in relation to nutrients and carbon cycling. Reports suggested that both plastisphere (MP-microbe consortium) and MP-contaminated soils had distinct and lower microbial diversity than that of non-contaminated soils. Alteration in soil physicochemical properties and microbial interactions within the plastisphere facilitated the enrichment of plastic-degrading microorganisms, including those involved in carbon (C) and nutrient cycling. MPs conferred a significant increase in the relative abundance of soil nitrogen (N)-fixing and phosphorus (P)-solubilizing bacteria, while decreased the abundance of soil nitrifiers and ammonia oxidisers. Depending on soil types, MPs increased bioavailable N and P contents and nitrous oxide emission in some instances. Furthermore, MPs regulated soil microbial functional activities owing to the combined toxicity of organic and inorganic contaminants derived from MPs and contaminants frequently encountered in the soil environment. However, a thorough understanding of the interactions among soil microorganisms, MPs and other contaminants still needs to develop. Since currently available reports are mostly based on short-term laboratory experiments, field investigations are needed to assess the long-term impact of MPs (at environmentally relevant concentration) on soil microorganisms and their functions under different soil types and agro-climatic conditions.

Microplastics: a review of their impacts on different life forms and their removal methods.

The pollution of microplastics (MPs) is a worldwide major concern, as they have become a major part of our food chain. MPs enter our ecosystem via different pathways, including anthropogenic activities and improper disposal of plastics. The aim of this article is to review the current scientific literature related to MPs and how they affect different life forms on earth. Briefly, MPs induced negative effects on humans are primarily linked with the oxidative stress and disruption in immunity. MPs not only affect the soil chemical and physical properties such as reduction in soil health and productivity but also impose harmful effects on soil microorganisms. Moreover, MP-induced plant growth reduction results from three complementary mechanisms: (i) reduction in root and shoot growth, (ii) reduction in photosynthesis accompanied by higher reactive oxygen species (ROS) production, and (iii) reduction in nutrient uptake via altered root growth. Given the negative effects of MPs on different life forms, it is important to remove or remediate them. We have discussed different MP removal methods including coagulation, membrane filtration technology, biochar, and biological degradation of MPs in soil and wastewater effluents. The use of ozone as ultrafiltration technique has also been shown as the most promising technique for MP removal. Finally, some future research recommendations are also put forward at the end to further enhance our understanding of the MPs induced negative effects on different life forms. The flowchart shows the interaction of MPs from water contaminated with MPs with different parts of the ecosystem and final interaction with human health.

A discussion of microplastics in soil and risks for ecosystems and food chains.

Microplastics are among the major contaminations in terrestrial and marine environments worldwide. These persistent organic contaminants composed of tiny particles are of concern due to their potential hazards to ecosystem and human health. Microplastics accumulates in the ocean and in terrestrial ecosystems, exerting effects on living organisms including microbiomes, fish and plants. While the accumulation and fate of microplastics in marine ecosystems is thoroughly studied, the distribution and biological effects in terrestrial soil call for more research. Here, we review the sources of microplastics and its effects on soil physical and chemical properties, including water holding capacity, bulk density, pH value as well as the potential effects to microorganisms and animals. In addition, we discuss the effects of microplastics in combination with other toxic environmental contaminants including heavy metals and antibiotics on plant growth and physiology, as well as human health and possible degradation and remediation methods. This reflect is an urgent need for monitoring projects that assess the toxicity of microplastics in soil and plants in various soil environments. The prospect of these future research activities should prioritize microplastics in agro-ecosystems, focusing on microbial degradation for remediation purposes of microplastics in the environment.

Interactions between white and black carbon in water: A case study of concurrent aging of microplastics and biochar.

Microplastics and biochar, as particulate matter that is prevalent in the water environment, will inevitably encounter and interact with each other during environmental aging. The potential interaction of microplastics and biochar, and the associated impact on their environmental behavior remains largely unknown. In this study, we exposed microplastics and biochar concurrently to ultraviolet light to mimic the aging process, investigated the release and fluorescence characteristics of dissolved organic matter (DOM) in water, and analyzed the effects of co-existing microplastics and biochar on their sorption of organic contaminants. We demonstrate that early-stage interactions of microplastics and biochar could entangle to promote the release of DOM from biochar, while their long-term interactions after light irradiation resulted in the sorption of hydrophobic and small molecules of microbial byproduct-like DOM. Simultaneously, early-stage interactions of microplastics and biochar showed a promotion for sorption of organic contaminants with an increase of 5.3-17.7%. After aging, however, long-term interactions between microplastics and biochar made it no longer promote the sorption of organic contaminants due to the influence of heterogeneous aggregation. Our results provide new insights into the time-dependent interactions between microplastics and biochar and highlight the need to incorporate their interactions into future environmental risk assessments for microplastics in the water environment.

A comprehensive review of micro- and nano-plastics in the atmosphere: Occurrence, fate, toxicity, and strategies for risk reduction.

Micro- and nano-plastics (MNPs) have received considerable attention over the past 10 years due to their environmental prevalence and potential toxic effects. With the increase in global plastic production and disposal, MNP pollution has become a topic of emerging concern. In this review, we describe MNPs in the atmospheric environment, and potential toxicological effects of exposure to MNPs. Studies have reported the occurrence of MNPs in outdoor and indoor air at concentrations ranging from 0.0065 items m-3 to 1583 items m-3. Findings have identified plastic fragments, fibers, and films in sizes predominantly <1000 µm with polyamide (PA), polyester (PES), polyethylene terephthalate (PET), polypropylene (PP), rayon, polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), polyacrylonitrile (PAN), and ethyl vinyl acetate (EVA) as the major compounds. Exposure through indoor air and dust is an important pathway for humans. Airborne MNPs pose health risks to plants, animals, and humans. Atmospheric MNPs can enter organism bodies via inhalation and subsequent deposition in the lungs, which triggers inflammation and other adverse health effects. MNPs could be eliminated through source reduction, policy/regulation, environmental awareness and education, biodegradable materials, bioremediation, and efficient air-filtration systems. To achieve a sustainable society, it is crucial to implement effective strategies for reducing the usage of single-use plastics (SUPs). Further, governments play a pivotal role in addressing the pressing issue of MNPs pollution and must establish viable solutions to tackle this significant challenge.

The polymers and their additives in particulate plastics: What makes them hazardous to the fauna?

Due to the increasing concerns on global ecosystems and human health, the environmental risks posed by microplastics (MPs) and nanoplastics (NPs) have become an important topic of research. Their ecological impacts on various faunal species have been extensively researched and reviewed. However, the majority of those studies perceive these micro(nano)-plastics (MNPs) as a single entity rather than a collective term for a group of chemically distinct polymeric particulates. Each of the plastic polymers can possess unique physical and chemical behavior, which, in turn, can determine the possible environmental impacts. Furthermore, many studies explore the adsorption, absorption, and release of other environmental pollutants by MNPs. But only a handful of them explore the leaching of additives possessed by these polymers. Data on the environmental behavior and toxicity of individual additives associated with different polymer particulates are scarce. Knowledge about the leachability and ecotoxicity of the additives associated with environmental MNPs (unlike large plastic particles) remains limited. The ecological impacts of different MNPs together with their additives and the basis of their toxicity have not been explored yet. The present review systematically explores the potential implications of environmentally predominant polymers and their associated additives and discusses their physicochemical characteristics. The review ultimately aims to provide novel insights on what components precisely make MNPs hazardous to the fauna. The paper also discusses the major challenges proposed in the available literature along with recommendations for future research to throw light on possible solutions to overcome the hazards of MNPs.

The effects of light regime on carbon cycling, nutrient removal, biomass yield, and polyhydroxybutyrate (PHB) production by a constructed photosynthetic consortium.

Microalgae can add value to biological wastewater treatment processes by capturing carbon and nutrients and producing valuable biomass. Harvesting small cells from liquid media is a challenge easily addressed with biofilm cultivation. Three experimental photobioreactors were constructed from inexpensive materials (e.g. plexiglass, silicone) for hybrid liquid/biofilm cultivation of a microalgal-bacterial consortia in aquaculture effluent. Three light regimes (full-spectrum, blue-white, and red) were implemented to test light spectra as a process control. High-intensity full-spectrum light caused photoinhibition and low biomass yield, but produced the most polyhydroxybutyrate (PHB) (0.14 mg g-1); a renewable bioplastic polymer. Medium-intensity blue-white light was less effective for carbon capture, but removed up to 82 % of phosphorus. Low-intensity red light was the only net carbon-negative regime, but increased phosphorus (+4.98 mg/L) in the culture medium. Light spectra and intensity have potential as easily-implemented process controls for targeted wastewater treatment, biomass production, and PHB synthesis using photosynthetic consortia.

Plant-derived saponin enhances biodegradation of petroleum hydrocarbons in the rhizosphere of native wild plants.

Plant-derived saponins are bioactive surfactant compounds that can solubilize organic pollutants in environmental matrices, thereby facilitating pollutant remediation. Externally applied saponin has potential to enhance total petroleum hydrocarbon (TPH) biodegradation in the root zone (rhizosphere) of wild plants, but the associated mechanisms are not well understood. For the first time, this study evaluated a triterpenoid saponin (from red ash leaves, Alphitonia excelsa) in comparison to a synthetic surfactant (Triton X-100) for their effects on plant growth and biodegradation of TPH in the rhizosphere of two native wild species (a grass, Chloris truncata, and a shrub, Hakea prostrata). The addition of Triton X-100 at the highest level (1000 mg/kg) in the polluted soil significantly hindered the plant growth (reduced plant biomass and photosynthesis) and associated rhizosphere microbial activity in both the studied plants. Therefore, TPH removal in the rhizosphere of both plant species treated with the synthetic surfactant was not enhanced (at the lower level, 500 mg/kg soil) and even slightly decreased (at the highest level) compared to that in the surfactant-free (control) treatment. By contrast, TPH removal was significantly increased with saponin application (up to 60% in C. truncata at 1000 mg/kg due to enhanced plant growth and associated rhizosphere microbial activity). No significant difference was observed between the two saponin application levels. Dehydrogenase activity positively correlated with TPH removal (p < 0.001) and thus this parameter could be used as an indicator to predict the rhizoremediation efficiency. This work indicates that saponin-amended rhizoremediation could be an environmentally friendly and effective biological approach to remediate TPH-polluted soils. It was clear that the enhanced plant growth and rhizosphere microbial activity played a crucial role in TPH rhizoremediation efficiency. The saponin-induced molecular processes that promoted plant growth and soil microbial activity in the rhizosphere warrant further studies.

Challenges and opportunities in bioremediation of micro-nano plastics: A review.

Rising level of micro-nano plastics (MNPs) in the natural ecosystem adversely impact the health of the environment and living organisms globally. MNPs enter in to the agro-ecosystem, flora and fauna, and human body via trophic transfer, ingestion and inhalation, resulting impediment in blood vessel, infertility, and abnormal behaviors. Therefore, it becomes indispensable to apply a novel approach to remediate MNPs from natural environment. Amongst the several prevailing technologies of MNPs remediation, microbial remediation is considered as greener technology. Microbial degradation of plastics is typically influenced by several biotic as well as abiotic factors, such as enzymatic mechanisms, substrates and co-substrates concentration, temperature, pH, oxidative stress, etc. Therefore, it is pivotal to recognize the key pathways adopted by microbes to utilize plastic fragments as a sole carbon source for the growth and development. In this context, this review critically discussed the role of various microbes and their enzymatic mechanisms involved in biodegradation of MNPs in wastewater (WW) stream, municipal sludge, municipal solid waste (MSW), and composting starting with biological and toxicological impacts of MNPs. Moreover, this review comprehensively discussed the deployment of various MNPs remediation technologies, such as enzymatic, advanced molecular, and bio-membrane technologies in fostering the bioremediation of MNPs from various environmental compartments along with their pros and cons and prospects for future research.

Removal of nanoplastics in water treatment processes: A review.

Nanoplastics are drawing a significant attention as a result of their propensity to spread across the environment and pose a threat to all organisms. The presence of nanoplastics in water is given attention nowadays as the transit of nanoplastics occurs through the aquatic ecosphere besides terrestrial mobility. The principal removal procedures for macro-and micro-plastic particles are effective, but nanoparticles escape from the treatment, increasing in the water and significantly influencing the society. This critical review is aimed to bestow the removal technologies of nanoplastics from aquatic ecosystems, with a focus on the treatment of freshwater, drinking water, and wastewater, as well as the importance of transit and its impact on health concerns. Still, there exists a gap in providing a collective knowledge on the methods available for nanoplastics removal. Hence, this review offered various nanoplastic removal technologies (microorganism-based degradation, membrane separation with a reactor, and photocatalysis) that could be the practical/effective measures along with the traditional procedures (filtration, coagulation, centrifugation, flocculation, and gravity settling). From the analyses of different treatment systems, the effectiveness of nanoplastics removal depends on various factors, source, size, and type of nanoplastics apart from the treatment method adopted. Combined removal methods, filtration with coagulation offer great scope for the removal of nanoplastics from drinking water with >99 % efficiency. The collected data could serve as base-line information for future research and development in water nanoplastics cleanup.

Microplastics as an emerging source of particulate air pollution: A critical review.

Accumulation of plastic litter exerts pressure on the environment. Microplastics (MPs) pollution has become a universal challenge due to the overexploitation of plastic products and unsystematic dumping of plastic waste. Initial studies on MPs and their implications had been confined to aquatic and terrestrial ecosystems, but recent research has also focused on MPs in the air. Their impacts on urban air quality and atmospheric transport to pristine habitats have emerged to be a serious concern. However, the extent and the significance of impacts of airborne particulate matter (PM) MPs on human health are not clearly understood. Further, the influence of airborne MPs on indoor and outdoor air quality remains unknown. We highlight the human health impacts of airborne PM-MPs with a special focus on the occupational safety of the industry workers, their possible influence on Air Quality Index (AQI), their potential exposure, and accumulation in the canopy/arboreal, above-canopy and atmospheric (aerial) habitats. The present review emphasizes the data limitations and knowledge gaps on the atmospheric transport and contribution of particulate plastics to the worsening of overall urban air quality and throws critical perspectives on whether atmospheric MPs pollution is trivial or an actual matter of concern.

Interactions between microplastics, pharmaceuticals and personal care products: Implications for vector transport.

Microplastics are well known for vector transport of hydrophobic organic contaminants, and there are growing concerns regarding their potential adverse effects on ecosystems and human health. However, recent studies focussing on hydrophilic compounds, such as pharmaceuticals and personal care products (PPCPs), have shown that the compounds ability to be adsorbed onto plastic surfaces. The extensive use of PPCPs has led to their ubiquitous presence in the environment resulting in their cooccurrence with microplastics. The partitioning between plastics and PPCPs and their fate through vector transport are determined by various physicochemical characteristics and environmental conditions of specific matrices. Although the sorption capacities of microplastics for different PPCP compounds have been investigated extensively, these findings have not yet been synthesized and analyzed critically. The specific objectives of this review were to synthesize and critically assess the various factors that affect the adsorption of hydrophilic compounds such as PPCPs on microplastic surfaces and their fate and transport in the environment. The review also focuses on environmental factors such as pH, salinity, and dissolved organics, and properties of polymers and PPCP compounds, and the relationships with sorption dynamics and mechanisms. Furthermore, the ecotoxicological effects of PPCP-sorbed microplastics on biota and human health are also discussed.

Micro (nano) plastic pollution: The ecological influence on soil-plant system and human health.

Global plastic pollution has been a serious problem since many years and micro (nano) plastics (MNPs) have gained attention from researchers around the world. This is because MNPs able to exhibit toxicology and interact with potentially toxic elements (PTEs) in the environment, causing soil toxicity. The influences of MNPs on the soil systems and plant crops have been overlooked despite that MNPs can accumulate in the plant root system and generate detrimental impacts to the terrestrial environments. The consumption of these MNPs-contaminated plants or fruits by humans and animals will eventually lead to health deterioration. The identification and measurement of MNPs in various soil samples is challenging, making the understanding of the fate, environmental and ecological of MNPs in terrestrial ecosystem is limited. Prior to sample assessment, it is necessary to isolate the plastic particles from the environment samples, concentrate the plastic particles for analysis purpose to meet detection limit for analytical instrument. The isolation and pre-concentrated steps are challenging and may cause sample loss. Herein, this article reviews MNPs, including their fate in the environment and toxic effects exhibited towards soil microorganisms, plants and humans along with the interaction of MNPs with PTEs. In addition, various analysis methods of MNPs and management of MNPs as well as the crucial challenges and future research studies in combating MNPs in soil system are also discussed.