Efficacy and safety of a new heterologous fibrin biopolymer on socket bone healing after tooth extraction: An experimental pre-clinical study.

AIM: To assess the efficacy of heterologous fibrin biopolymer (HFB) in promoting alveolar bone healing after tooth extraction in rats. MATERIALS AND METHODS: The upper right incisors of 48 Wistar rats were extracted. Toothless sockets were filled with HFB (HFBG, n = 24) or blood clot (BCG, n = 24). The tooth extraction sites were subjected to micro-computed tomography (micro-CT), histological, histomorphometric and immunohistochemical (for Runt-related transcription factor 2/Runx2 and tartrate-resistant acid phosphatase/TRAP) analyses on days 0, 7, 14 and 42 after extraction. RESULTS: Socket volume remained similar between days 0 and 14 (69 ± 5.4 mm3), except in the BCG on day 14, when it was 10% lower (p = .043). Although the number of Runx2+ osteoblasts was high and similar in both groups (34 × 102 cells/mm2), the HFBG showed lower inflammatory process and osteoclast activity than BCG at 7 days. On day 14, the number of Runx2+ osteoblasts remained high and similar to the previous period in both groups. However, osteoclast activity increased. This increase was 55% lower in the HFBG than BCG. In the BCG, the presence of an inflammatory process and larger and numerous osteoclasts on day 14 led to resorption of the alveolar bone ridge and newly formed bone. On day 42, numbers of Runx2+ osteoblast and TRAP+ osteoclasts decreased dramatically in both groups. Although the BCG exhibited a more mature cortical bone formation, it exhibited a higher socket reduction (28.3 ± 6.67%) and smaller bone volume (37 ± 5.8 mm3) compared with HFBG (socket reduction of 14.8 ± 7.14% and total bone volume of 46 ± 5.4 mm3). CONCLUSIONS: HFB effectively suppresses osteoclast activity and reduces alveolar bone resorption compared with blood clot, thus preventing three-dimensional bone loss, particularly during the early healing period. HFB emerges as a promising biopharmaceutical material for enhancing healing processes after tooth extraction.

Topographic and Morphometric Study of the Foramen Spinosum of the Skull and Its Clinical Correlation.

Background and Objectives: The spinous foramen (FS) of the skull is an opening located in the greater wing of the sphenoid bone at the base of the skull, and it includes the middle meningeal vessels and the meningeal branch of the mandibular trigeminal nerve. The FS is commonly used as an anatomical landmark in neurosurgical procedures and neuroimaging of the middle cranial fossa because of its relationship with other cranial foramina and surrounding vascular and nervous structures. Thus, specific knowledge of its topography and possible anatomical variations is important regarding some surgical interventions and skull imaging. The aim of this study was to provide further details on the morphology of the FS of the skull by evaluating its topographic and morphometric relationships and correlating the findings with clinical practice. Materials and Methods: Thirty dried skulls of human skeletons from body donors from the collection of the Laboratory of Anatomical Microdissection at a medical school were used. The metric dimensions and variations of the FS and its relationship with adjacent bone structures were analyzed with an interface digital microscope. Results: The results showed the bilateral presence of the FS in all skulls; however, differences were observed in the shape, diameter, and topography in relation to the foramen ovale and the spine of the sphenoid. The FS was present in the greater wing of the sphenoid bone; however, in one skull, it was located in the lateral lamina of the pterygoid process. The FS was smaller than the foramen ovale. A round and oval FS shape was the most common (42.1% and 32.8% of the samples, respectively), followed by drop-shaped (12.5%) and irregular-shaped (12.5%) foramina. Conclusions: In conclusion, FS variations among individuals are common and must be considered by surgeons during skull base interventions in order to avoid accidents and postoperative complications.

In Vivo Biological Behavior of Polymer Scaffolds of Natural Origin in the Bone Repair Process.

Autologous bone grafts, used mainly in extensive bone loss, are considered the gold standard treatment in regenerative medicine, but still have limitations mainly in relation to the amount of bone available, donor area, morbidity and creation of additional surgical area. This fact encourages tissue engineering in relation to the need to develop new biomaterials, from sources other than the individual himself. Therefore, the present study aimed to investigate the effects of an elastin and collagen matrix on the bone repair process in critical size defects in rat calvaria. The animals (Wistar rats, n = 30) were submitted to a surgical procedure to create the bone defect and were divided into three groups: Control Group (CG, n = 10), defects filled with blood clot; E24/37 Group (E24/37, n = 10), defects filled with bovine elastin matrix hydrolyzed for 24 h at 37 °C and C24/25 Group (C24/25, n = 10), defects filled with porcine collagen matrix hydrolyzed for 24 h at 25 °C. Macroscopic and radiographic analyses demonstrated the absence of inflammatory signs and infection. Microtomographical 2D and 3D images showed centripetal bone growth and restricted margins of the bone defect. Histologically, the images confirmed the pattern of bone deposition at the margins of the remaining bone and without complete closure by bone tissue. In the morphometric analysis, the groups E24/37 and C24/25 (13.68 ± 1.44; 53.20 ± 4.47, respectively) showed statistically significant differences in relation to the CG (5.86 ± 2.87). It was concluded that the matrices used as scaffolds are biocompatible and increase the formation of new bone in a critical size defect, with greater formation in the polymer derived from the intestinal serous layer of porcine origin (C24/25).

D-Tagatose: A Rare Sugar with Functional Properties and Antimicrobial Potential against Oral Species.

Carbohydrates have a dietary role, but excessive consumption of high-calorie sugars can contribute to an increased incidence of metabolic diseases and dental caries. Recently, carbohydrates with sweetening properties and low caloric value, such as D-tagatose, have been investigated as alternative sugars. D-tagatose is a rare sugar that has nutritional and functional properties of great interest for health. This literature review presents an approach to the biological effects of D-tagatose, emphasizing its benefits for oral health. Studies report that D-tagatose has antioxidant and prebiotic effects, low digestibility, reduced glycemic and insulinemic responses, and the potential to improve the lipid profile, constituting an alternative for diabetes mellitus and obesity. It can also be observed that D-tagatose has an antioxidant action, favoring the elimination of free radicals and, consequently, causing a reduction in cellular oxidative stress. Furthermore, it also has antibacterial potential against oral species. Regarding oral health, studies have shown that D-tagatose efficiently reversed bacterial coaggregations, including periodontopathogenic species, and impaired the activity and growth of cariogenic bacteria, such as S. mutans. D-tagatose significantly inhibited biofilm formation, pH decrease and insoluble glucan synthesis in S. mutans cultures. Salivary S. mutans counts were also significantly reduced by the consumption of chewing gum containing D-tagatose and xylitol. In addition, there is evidence that tagatose is effective as an air-polishing powder for biofilm decontamination. The literature indicates that D-tagatose can contribute to the prevention of systemic diseases, also constituting a promising agent to improve oral health.

Use of Plant Extracts in Polymeric Scaffolds in the Regeneration of Mandibular Injuries.

Severe loss of bone mass may require grafting, and, among the alternatives available, there are natural biomaterials that can act as scaffolds for the cell growth necessary for tissue regeneration. Collagen and elastin polymers are a good alternative due to their biomimetic properties of bone tissue, and their characteristics can be improved with the addition of polysaccharides such as chitosan and bioactive compounds such as jatoba resin and pomegranate extract due to their antigenic actions. The aim of this experimental protocol was to evaluate bone neoformation in experimentally made defects in the mandible of rats using polymeric scaffolds with plant extracts added. Thirty rats were divided into group 1, with a mandibular defect filled with a clot from the lesion and no graft implant (G1-C, n = 10); group 2, filled with collagen/chitosan/jatoba resin scaffolds (G2-CCJ, n = 10); and group 3, with collagen/nanohydroxyapatite/elastin/pomegranate extract scaffolds (G3-CHER, n = 10). Six weeks after surgery, the animals were euthanized and samples from the surgical areas were submitted to macroscopic, radiological, histological, and morphometric analysis of the mandibular lesion repair process. The results showed no inflammatory infiltrates in the surgical area, indicating good acceptance of the scaffolds in the microenvironment of the host area. In the control group (G1), there was a predominance of reactive connective tissue, while in the grafted groups (G2 and G3), there was bone formation from the margins of the lesion, but it was still insufficient for total bone repair of the defect within the experimental period standardized in this study. The histomorphometric analysis showed that the mean percentage of bone volume formed in the surgical area of groups G1, G2, and G3 was 17.17 ± 2.68, 27.45 ± 1.65, and 34.07 ± 0.64 (mean ± standard deviation), respectively. It can be concluded that these scaffolds with plant extracts added can be a viable alternative for bone repair, as they are easily manipulated, have a low production cost, and stimulate the formation of new bone by osteoconduction.

Biological Properties and Antimicrobial Potential of Cocoa and Its Effects on Systemic and Oral Health.

Cocoa is considered a functional food because it is a natural source of macro- and micronutrients. Thus, cocoa is rich in vitamins, minerals, fiber, fatty acids, methylxanthines and flavonoids. In addition to favoring the metabolism of lipids and carbohydrates, the bioactive components of cocoa can have an antioxidant, anti-inflammatory and antimicrobial effect, providing numerous benefits for health. This literature review presents an overview of the effects of cocoa, fruit of the Theobroma cacao tree, on systemic and oral health. Several studies report that cocoa intake may contribute to the prevention of cardiovascular, neurodegenerative, immunological, inflammatory, metabolic and bone diseases, in addition to reducing the risk of vascular alterations and cognitive dysfunctions. On oral health, in vitro studies have shown that cocoa extract exerted an inhibitory effect on the growth, adherence and metabolism of cariogenic and periodontopathogenic bacteria, also inhibiting acid production, glycosyltransferase enzyme activity and the synthesis of insoluble polysaccharides. Additionally, administration of cocoa extract reduced biofilm accumulation and caries development in animals infected with cariogenic species. Clinical studies also reported that the use of mouthwashes containing cocoa extract reduced Streptococcus mutans counts in saliva and dental biofilm formation. In short, these studies highlight the nutritional value of cocoa, considering its clinical applicability, stability and economic accessibility.

Collagen-chitosan-hydroxyapatite composite scaffolds for bone repair in ovariectomized rats.

Lesions with bone loss may require autologous grafts, which are considered the gold standard; however, natural or synthetic biomaterials are alternatives that can be used in clinical situations that require support for bone neoformation. Collagen and hydroxyapatite have been used for bone repair based on the concept of biomimetics, which can be combined with chitosan, forming a scaffold for cell adhesion and growth. However, osteoporosis caused by gonadal hormone deficiency can thus compromise the expected results of the osseointegration of scaffolds. The aim of this study was to investigate the osteoregenerative capacity of collagen (Co)/chitosan (Ch)/hydroxyapatite (Ha) scaffolds in rats with hormone deficiency caused by experimental bilateral ovariectomy. Forty-two rats were divided into non-ovariectomized (NO) and ovariectomized (O) groups, divided into three subgroups: control (empty defect) and two subgroups receiving collagen/chitosan/hydroxyapatite scaffolds prepared using different methods of hydroxyapatite incorporation, in situ (CoChHa1) and ex situ (CoChHa2). The defect areas were submitted to macroscopic, radiological, and histomorphometric analysis. No inflammatory processes were found in the tibial defect area that would indicate immune rejection of the scaffolds, thus confirming the biocompatibility of the biomaterials. Bone formation starting from the margins of the bone defect were observed in all rats, with a greater volume in the NO groups, particularly the group receiving CoChHa2. Less bone formation was found in the O subgroups when compared to the NO. In conclusion, collagen/chitosan/hydroxyapatite scaffolds stimulate bone growth in vivo but abnormal conditions of bone fragility caused by gonadal hormone deficiency may have delayed the bone repair process.

Biochemical and Microbiological Aspects of the Oral Cavity of Children and Young People with Neurological Impairment and Oropharyngeal Dysphagia.

The components and the salivary flow have a direct influence on the composition of the oral microbiota of children and young people with oropharyngeal dysphagia, and studies have already demonstrated the excessive accumulation of supragingival dental calculus in individuals with enteral nutrition. This study aimed to compare the oral hygiene, biochemical, and microbiological aspects of the oral cavity of children and young people with neurological impairment and oropharyngeal dysphagia. Forty children and young people with neurological impairment and oropharyngeal dysphagia were enrolled and divided into two groups: group I, encompassing 20 participants fed via gastrostomy; and group II, encompassing 20 participants fed via the oral route. Oral hygiene and salivary pH and flow were assessed, and a polymerase chain reaction was performed to evaluate the messenger RNA expressions of Porphyromonas gingivalis, Tanerella forsythia, and Treponema denticola. In groups I and II, the mean Oral Hygiene Index-Simplified scores were 4 and 2, respectively, showing a significant difference; the mean Calculus Index scores were 2 and 0, respectively, showing a significant difference; and the mean pH was 7.5 and 6.0, respectively, showing a significant difference. Bacterial analysis indicated no association between the two groups. It can be concluded that children and young people who use gastrostomy had a poorer oral hygiene, greater dental calculus deposition, and higher salivary pH. The saliva of patients in both groups contained Porphyromonas gingivalis, Tanerella forsythia, and Treponema denticola.

In Vivo Evaluation of Collagen and Chitosan Scaffold, Associated or Not with Stem Cells, in Bone Repair.

Natural polymers are increasingly being used in tissue engineering due to their ability to mimic the extracellular matrix and to act as a scaffold for cell growth, as well as their possible combination with other osteogenic factors, such as mesenchymal stem cells (MSCs) derived from dental pulp, in an attempt to enhance bone regeneration during the healing of a bone defect. Therefore, the aim of this study was to analyze the repair of mandibular defects filled with a new collagen/chitosan scaffold, seeded or not with MSCs derived from dental pulp. Twenty-eight rats were submitted to surgery for creation of a defect in the right mandibular ramus and divided into the following groups: G1 (control group; mandibular defect with clot); G2 (defect filled with dental pulp mesenchymal stem cells-DPSCs); G3 (defect filled with collagen/chitosan scaffold); and G4 (collagen/chitosan scaffold seeded with DPSCs). The analysis of the scaffold microstructure showed a homogenous material with an adequate percentage of porosity. Macroscopic and radiological examination of the defect area after 6 weeks post-surgery revealed the absence of complete repair, as well as absence of signs of infection, which could indicate rejection of the implants. Histomorphometric analysis of the mandibular defect area showed that bone formation occurred in a centripetal fashion, starting from the borders and progressing towards the center of the defect in all groups. Lower bone formation was observed in G1 when compared to the other groups and G2 exhibited greater osteoregenerative capacity, followed by G4 and G3. In conclusion, the scaffold used showed osteoconductivity, no foreign body reaction, malleability and ease of manipulation, but did not obtain promising results for association with DPSCs.

Application of Fibrin Associated with Photobiomodulation as a Promising Strategy to Improve Regeneration in Tissue Engineering: A Systematic Review.

Fibrin, derived from proteins involved in blood clotting (fibrinogen and thrombin), is a biopolymer with different applications in the health area since it has hemostasis, biocompatible and three-dimensional physical structure properties, and can be used as scaffolds in tissue regeneration or drug delivery system for cells and/or growth factors. Fibrin alone or together with other biomaterials, has been indicated for use as a biological support to promote the regeneration of stem cells, bone, peripheral nerves, and other injured tissues. In its diversity of forms of application and constitution, there are platelet-rich fibrin (PRF), Leukocyte- and platelet-rich fibrin (L-PRF), fibrin glue or fibrin sealant, and hydrogels. In order to increase fibrin properties, adjuvant therapies can be combined to favor tissue repair, such as photobiomodulation (PBM), by low-level laser therapy (LLLT) or LEDs (Light Emitting Diode). Therefore, this systematic review aimed to evaluate the relationship between PBM and the use of fibrin compounds, referring to the results of previous studies published in PubMed/MEDLINE, Scopus and Web of Science databases. The descriptors "fibrin AND low-level laser therapy" and "fibrin AND photobiomodulation" were used, without restriction on publication time. The bibliographic search found 44 articles in PubMed/MEDLINE, of which 26 were excluded due to duplicity or being outside the eligibility criteria. We also found 40 articles in Web of Science and selected 1 article, 152 articles in Scopus and no article selected, totaling 19 articles for qualitative analysis. The fibrin type most used in combination with PBM was fibrin sealant, mainly heterologous, followed by PRF or L-PRF. In PBM, the gallium-aluminum-arsenide (GaAlAs) laser prevailed, with a wavelength of 830 nm, followed by 810 nm. Among the preclinical studies, the most researched association of fibrin and PBM was the use of fibrin sealants in bone or nerve injuries; in clinical studies, the association of PBM with medication-related treatments osteonecrosis of the jaw (MRONJ). Therefore, there is scientific evidence of the contribution of PBM on fibrin composites, constituting a supporting therapy that acts by stimulating cell activity, angiogenesis, osteoblast activation, axonal growth, anti-inflammatory and anti-edema action, increased collagen synthesis and its maturation, as well as biomolecules.

Effectiveness of Ergonomic Training to Decrease Awkward Postures during Dental Scaling Procedures: A Randomized Clinical Trial.

Studies demonstrate that there is a lack of effective ergonomic principles for adopting a neutral posture during the execution of dental procedures. ISO 11.226:2000 Standard, Corr. 1:2006 has been thoroughly evaluated and adapted to the way that dentists work by the European Society of Dental Ergonomics (ESDE). However, after 15 years, no studies that showed strong evidence of effectiveness in reducing the prevalence of awkward posture in applying its parameters within the scope of dental practice were found. The aim of this study was to verify the effectiveness of applying the ergonomic parameters proposed by the European Society of Dental Ergonomics (ESDE) and ISO 11226 in reducing the prevalence of the main awkward postures adopted by female dental surgeons during the execution of dental scaling on a dental mannequin. A randomized clinical trial was carried out with sixty dental surgeons randomly assigned to two groups: the intervention group, who received instructions and theoretical and practical ergonomic training; and the control group, who received the same training only at the end of the study. For data analysis, Software IBM SPSS 27 and RStudio was used. Descriptive statistics were performed to verify the effectiveness of the intervention, and generalized linear models (specifically, generalized estimated equation models) were used. Poisson distribution was carried out with log link function and network analyses. Sixty female dental surgeons participated in the study. Twenty-two were distributed in the intervention group and thirty-eight in the control group. It was found that ergonomic training enabled a 63% reduction in the prevalence of awkward postures and that there was a statistically significant difference (p < 0.001) only in the intervention group. The analyses showed that the estimated marginal means of postures not recommended in the groups' initial control, final control, initial intervention, and final intervention were 8.6, 8.2, 9.0, and 3.4, respectively. The relationship of networks analyses of the variables is shown with different profiles in the control and intervention groups, but the same pattern between the groups only vary in the strength and direction of the correlations. It was concluded that the ergonomic training based on the parameters of ISO 11226 and DIN EN 1005-4, and its adaptations to the dental practice provided by the European Society of Dental Ergonomics, as well as recent studies, contributed significantly to reducing the prevalence of awkward postures adopted by female dentists during the simulation of the basic periodontal procedures; however, it was not effective enough to improve the posture of the head and neck.

Osseointegration Improvement of Co-Cr-Mo Alloy Produced by Additive Manufacturing.

Cobalt-base alloys (Co-Cr-Mo) are widely employed in dentistry and orthopedic implants due to their biocompatibility, high mechanical strength and wear resistance. The osseointegration of implants can be improved by surface modification techniques. However, complex geometries obtained by additive manufacturing (AM) limits the efficiency of mechanical-based surface modification techniques. Therefore, plasma immersion ion implantation (PIII) is the best alternative, creating nanotopography even in complex structures. In the present study, we report the osseointegration results in three conditions of the additively manufactured Co-Cr-Mo alloy: (i) as-built, (ii) after PIII, and (iii) coated with titanium (Ti) followed by PIII. The metallic samples were designed with a solid half and a porous half to observe the bone ingrowth in different surfaces. Our results revealed that all conditions presented cortical bone formation. The titanium-coated sample exhibited the best biomechanical results, which was attributed to the higher bone ingrowth percentage with almost all medullary canals filled with neoformed bone and the pores of the implant filled and surrounded by bone ingrowth. It was concluded that the metal alloys produced for AM are biocompatible and stimulate bone neoformation, especially when the Co-28Cr-6Mo alloy with a Ti-coated surface, nanostructured and anodized by PIII is used, whose technology has been shown to increase the osseointegration capacity of this implant.

Photobiomodulation Therapy Associated with Heterologous Fibrin Biopolymer and Bovine Bone Matrix Helps to Reconstruct Long Bones.

Bone defects cause aesthetic and functional changes that affect the social, economic and especially the emotional life of human beings. This complication stimulates the scientific community to investigate strategies aimed at improving bone reconstruction processes using complementary therapies. Photobiomodulation therapy (PBMT) and the use of new biomaterials, including heterologous fibrin biopolymer (HFB), are included in this challenge. The objective of the present study was to evaluate the influence of photobiomodulation therapy on bone tibial reconstruction of rats with biomaterial consisting of lyophilized bovine bone matrix (BM) associated or not with heterologous fibrin biopolymer. Thirty male rats were randomly separated into three groups of 10 animals. In all animals, after the anesthetic procedure, a noncritical tibial defect of 2 mm was performed. The groups received the following treatments: Group 1: BM + PBMT, Group 2: BM + HFB and Group 3: BM + HFB + PBMT. The animals from Groups 1 and 3 were submitted to PBMT in the immediate postoperative period and every 48 h until the day of euthanasia that occurred at 14 and 42 days. Analyses by computed microtomography (µCT) and histomorphometry showed statistical difference in the percentage of bone formation between Groups 3 (BM + HB + PBMT) and 2 (BM + HFB) (26.4% ± 1.03% and 20.0% ± 1.87%, respectively) at 14 days and at 42 days (38.2% ± 1.59% and 31.6% ± 1.33%, respectively), and at 42 days there was presence of bone with mature characteristics and organized connective tissue. The µCT demonstrated BM particles filling the defect and the deposition of new bone in the superficial region, especially in the ruptured cortical. It was concluded that the association of PBMT with HFB and BM has the potential to assist in the process of reconstructing bone defects in the tibia of rats.

Reverse Cast Metallic Core Based on the Original Prosthetic Crown.

The dental crown can be restored using the root in clinical situations where the dental remnant allows adequate anchorage by the use of an intraradicular retainer. After endodontic treatment, reconstruction of the dental anatomy depends on correct planning and the type of restoration to be used. This requires reestablishment of form and function with creation of anchoring features, avoiding detachment and favoring the distribution of forces, thus preventing fracture of the remnant due to functional and parafunctional forces applied on the tooth. This paper reports the clinical case of a patient who sought dental care for a full metal-ceramic crown with a cast metallic core with reduced length that had been detached from tooth 24. After clinical and radiographic examination, root integrity was verified. The patient was offered reconstruction with a cast metallic core of satisfactory length, providing adequate retention and support, with reutilization of the original prosthetic crown, serving as a reverse template of the coronal portion of this new core, providing reduction in costs and operational time.

Unique heterologous fibrin biopolymer with hemostatic, adhesive, sealant, scaffold and drug delivery properties: a systematic review.

Fibrin biopolymers, previously referred as "fibrin glue" or "fibrin sealants", are natural biomaterials with diverse applications on health. They have hemostatic, adhesive, sealant, scaffold and drug delivery properties and have become widely used in medical and dental procedures. Historically, these biomaterials are produced from human fibrinogen and human or animal thrombin, and the possibility of transmission of infectious diseases by human blood is not ruled out. In the 1990s, to overcome this problem, a new heterologous biomaterial composed of a thrombin-like enzyme purified from Crotalus durissus terrificus venom and a cryoprecipitate rich in fibrinogen extracted from buffaloes Bubalus bubalis blood has been proposed. Therefore, a systematic review of studies on exclusively heterologous fibrin sealants published between 1989 and 2018 was carried out using the following databases: PubMed, SciELO and Google Scholar. The keyword used was "heterologous fibrin sealant". The search resulted in 35 scientific papers in PubMed, four in SciELO and 674 in Google Scholar. After applying the inclusion/exclusion criteria and complete reading of the articles, 30 studies were selected, which formed the basis of this systematic review. It has been observed that the only completely heterologous sealant is the one produced by CEVAP/UNESP. This heterologous biopolymer is proven effective by several studies published in refereed scientific journals. In addition, clinical trials phase I/II for the treatment of chronic venous ulcers authorized by the Brazilian Health Regulatory Agency (ANVISA) were completed. Preliminary results have indicated a safe and promising effective product. Phase III clinical trials will be proposed and required to validate these preliminary findings.

Influence of experimental alcoholism on the repair process of bone defects filled with beta-tricalcium phosphate.

This study evaluated the effect of ethanol on the repair in calvaria treated with beta-tricalcium phosphate (ß-TCP). Forty rats were distributed into 2 groups: Water group (CG, n = 20) and Alcohol Group (AG, n = 20), which received 25% ethanol ad libitum after an adaptation period of 3 weeks. After 90 days of liquid diet, the rats were submitted to a 5.0 mm bilateral craniotomy in the parietal bones; the left parietal was filled with ß-TCP (CG-TCP and AG-TCP) and the contralateral only with blood clot (CG-Clot and AG-Clot). The animals were killed after 10, 20, 40 and 60 days. The groups CG-Clot and AG-Clot showed similar pattern of bone formation with a gradual and significant increase in the amount of bone in CG-Clot (22.17 ± 3.18 and 34.81 ± 5.49) in relation to AG-Clot (9.35 ± 5.98 and 21.65 ± 6.70) in periods of 20-40 days, respectively. However, in the other periods there was no statistically significant difference. Alcohol ingestion had a negative influence on bone formation, even with the use of ß-TCP, exhibiting slow resorption and replacement by fibrous tissue, with 16% of bone formation within 60 days in AG-TCP, exhibiting immature bone tissue with predominance of disorganized collagen fibers. Defects in CG-TCP showed bone tissue with predominance of lamellar arrangement filling 39% of the original defect. It can be concluded that chronic ethanol consumption impairs the ability to repair bone defects, even with the use of a ß-TCP biomaterial.

Action of a deproteinized xenogenic biomaterial in the process of bone repair in rats submitted to inhalation of cigarette smoke.

PURPOSE: To investigate if the inorganic bovine bone matrix changes the bone formation in rats submitted to inhalation of cigarette smoke. METHODS: Twenty Wistar rats were divided into two groups: Cigarette Clot Group (CCG), which in the inhalation chamber received the smoke of 10 cigarettes, 3 times a day, 10 minutes, for 30 days and had the surgical cavity filled by clot; Cigarette Biomaterial Group (CBG), submitted to the same inhalation technique but with the cavity filled by biomaterial. RESULTS: In CCG there was a significant difference of new bone tissue in the analyzed periods (15 and 45 days), and in 15 days, there was 4.8 ± 0.42 of bone formed and 11.73 ± 0.59 (p <0.05) in 45 days. The CBG also showed a significant difference between the periods of 15 to 45 days, being respectively 6.16 ± 0.30 and 11.60 ± 0.61. However, when the groups were compared, within the same analyzed periods, a significant difference was observed only in the period of 15 days, with the new bone percentage being greater in the CBG. CONCLUSION: The bone matrix acted as an osteoinductive biomaterial, biocompatible and aided in the repair process, mainly in the initial period of recovery.

A biocomplex to repair experimental critical size defects associated with photobiomodulation therapy

The association of scaffolds to repair extensive bone defects can contribute to their evolution and morphophysiological recomposition. The incorporation of particulate biomaterials into three-dimensional fibrin bioproducts together with photobiomodulation therapy (PBM) has potential and can improve regenerative medicine procedures. The objective of this experiment was to evaluate the effects of PBM therapy on critical size defects filled with xenogenic bone substitute associated with fibrin biopolymer. Methods: A critical defect of 8 mm was performed in 36 Wistar male adult rats that were divided into four groups. Groups BC and BC-PBM were defined as controls with defects filled by a clot (without or with PBM, respectively) and groups XS and XS-PBM that comprised those filled with biocomplex Bio-OssTM in association with fibrin biopolymer. PBM was applied immediately after the surgery and three times a week every other day, with the parameters: wavelength of 830 nm, energy density 6.2 J/cm2, output power 30 mW, beam area of 0.116 cm2, irradiance 0.258,62 W/cm2, energy/point 0.72 J, total energy 2.88 J. Fourteen and 42 days after the surgery, animals were euthanatized and subjected to microtomography, qualitative and quantitative histological analysis. Results: The BC-PBM and XS-PBM groups had a similar evolution in the tissue repair process, with a higher density of the volume of new formed bone in relation to the groups without PBM (p = 0.04086; p = 0.07093, respectively). Intense vascular proliferation and bone deposition around the biomaterial particles were observed in the animals of the groups in which biocomplex was applied (XS and XS-PBM). Conclusion: PBM therapy allowed an improvement in the formation of new bone, with a more organized deposition of collagen fibers in the defect area. Biocomplex favored the insertion and permanence of the particulate material in bone defects, creating a favorable microenvironment for accelerate repair process.(AU)

Reproduction of Esthetic Individuality in Upper Immediate Complete Denture / Reproducción de la Individualidad Estética en Prótesis Completa Inmediata Superior

ABSTRACT: Prosthodontics, in general, aims to rehabilitate the masticatory function of the patient, as well as the stomatognathic system, maintaining his or her individual facial characteristics. The immediate removable complete denture is placed immediately after extraction of the natural teeth and allows adaptation of the patient from the dentate state to the denture, until the definitive denture is placed. When an immediate complete denture is fabricated, esthetics plays a fundamental role and thus the assembly of artificial teeth can be performed maintaining the same position, alignment and arrangement of the remaining anterior teeth, providing a natural and esthetic appearance to the denture, thus the transition from the dentate to the edentulous state is less noticeable. This paper reports the case of a patient who needed oral rehabilitation with an immediate upper complete denture and presented favorable smile esthetics of the anterior teeth, which allowed the preservation of alignment, position and arrangement of natural teeth during the assembly of artificial teeth, maintaining and preserving the esthetic individuality and facial harmonization, meeting the patient's desire and expectations.

RESUMEN: La prostodoncia, en general, tiene como objetivo rehabilitar la función masticatoria del paciente, así como el sistema estomatognático, manteniendo sus características faciales individuales. La dentadura postiza completa removible se coloca inmediatamente después de la extracción de los dientes naturales y permite la adaptación del paciente del estado dentado a la dentadura, hasta que se coloque la dentadura definitiva. Cuando se fabrica una dentadura postiza completa inmediata, la estética juega un papel fundamental y, por lo tanto, el ensamblaje de dientes artificiales se puede realizar manteniendo la misma posición, alineación y disposición de los dientes anteriores restantes, proporcionando un aspecto natural y estético a la dentadura, por lo tanto, la transición desde el estado dentado hasta el estado desdentado es menos notable. Este artículo informa el caso de una paciente que necesitó rehabilitación oral con una dentadura postiza completa superior inmediata y presentó una estética de sonrisa favorable de los dientes anteriores, lo que permitió preservar la alineación, la posición y la disposición de los dientes naturales durante el ensamblaje de los dientes artificiales, manteniendo y preservando la individualidad estética y la armonización facial, satisfaciendo los deseos y expectativas del paciente.

Unique heterologous fibrin biopolymer with hemostatic, adhesive, sealant, scaffold and drug delivery properties: a systematic review

Fibrin biopolymers, previously referred as "fibrin glue" or "fibrin sealants", are natural biomaterials with diverse applications on health. They have hemostatic, adhesive, sealant, scaffold and drug delivery properties and have become widely used in medical and dental procedures. Historically, these biomaterials are produced from human fibrinogen and human or animal thrombin, and the possibility of transmission of infectious diseases by human blood is not ruled out. In the 1990s, to overcome this problem, a new heterologous biomaterial composed of a thrombin-like enzyme purified from Crotalus durissus terrificus venom and a cryoprecipitate rich in fibrinogen extracted from buffaloes Bubalus bubalis blood has been proposed. Therefore, a systematic review of studies on exclusively heterologous fibrin sealants published between 1989 and 2018 was carried out using the following databases: PubMed, SciELO and Google Scholar. The keyword used was "heterologous fibrin sealant". The search resulted in 35 scientific papers in PubMed, four in SciELO and 674 in Google Scholar. After applying the inclusion/exclusion criteria and complete reading of the articles, 30 studies were selected, which formed the basis of this systematic review. It has been observed that the only completely heterologous sealant is the one produced by CEVAP/UNESP. This heterologous biopolymer is proven effective by several studies published in refereed scientific journals. In addition, clinical trials phase I/II for the treatment of chronic venous ulcers authorized by the Brazilian Health Regulatory Agency (ANVISA) were completed. Preliminary results have indicated a safe and promising effective product. Phase III clinical trials will be proposed and required to validate these preliminary findings.(AU)