CHIP inhibits odontoblast differentiation through promoting DLX3 polyubiquitylation and degradation.

Dentin is the major hard tissue of teeth formed by differentiated odontoblasts. How odontoblast differentiation is regulated remains enigmatic. Here, we report that the E3 ubiquitin ligase CHIP is highly expressed in undifferentiated dental mesenchymal cells and downregulated after differentiation of odontoblasts. Ectopic expression of CHIP inhibits odontoblastic differentiation of mouse dental papilla cells, whereas knockdown of endogenous CHIP has opposite effects. Chip (Stub1) knockout mice display increased formation of dentin and enhanced expression of odontoblast differentiation markers. Mechanistically, CHIP interacts with and induces K63 polyubiquitylation of the transcription factor DLX3, leading to its proteasomal degradation. Knockdown of DLX3 reverses the enhanced odontoblastic differentiation caused by knockdown of CHIP. These results suggest that CHIP inhibits odontoblast differentiation by targeting its tooth-specific substrate DLX3. Furthermore, our results indicate that CHIP competes with another E3 ubiquitin ligase, MDM2, that promotes odontoblast differentiation by monoubiquitylating DLX3. Our findings suggest that the two E3 ubiquitin ligases CHIP and MDM2 reciprocally regulate DLX3 activity by catalyzing distinct types of ubiquitylation, and reveal an important mechanism by which differentiation of odontoblasts is delicately regulated by divergent post-translational modifications.

Dexamethasone Liposomes Alleviate Osteoarthritis in miR-204/-211-Deficient Mice by Repolarizing Synovial Macrophages to M2 Phenotypes.

We undertook this study to investigate the effects and mechanisms of dexamethasone liposome (Dex-Lips) on alleviating destabilization of the medial meniscus (DMM)-induced osteoarthritis (OA) in miR-204/-211-deficient mice. Dex-Lips was prepared by the thin-film hydration method. The characterization of Dex-Lips was identified by the mean size, zeta potential, drug loading, and encapsulation efficiencies. Experimental OA was established by DMM surgery in miR-204/-211-deficient mice, and then Dex-Lips was treated once a week for 3 months. Von Frey filaments was used to perform the pain test. The inflammation level was evaluated with quantitative real-time polymerase chain reaction and enzyme-linked immunosorbent assay. Polarization of macrophages was evaluated by immunofluorescent staining. X-ray, micro-CT scanning, and histological observations were conducted in vivo on DMM mice to describe the OA phenotype. We found that miR-204/-211-deficient mice displayed more severe OA symptoms than WT mice after DMM surgery. Dex-Lips ameliorated DMM-induced OA phenotype and suppressed pain and inflammatory cytokine expressions. Dex-Lips could attenuate pain by regulating PGE2. Dex-Lips treatments reduced the expression of TNF-α, IL-1ß, and IL-6 in DRG. Moreover, Dex-Lips could reduce inflammation in the cartilage and serum. Additionally, Dex-Lips repolarize synovial macrophages to M2 phenotypes in miR-204/-211-deficient mice. In conclusion, Dex-Lips inhibited the inflammatory response and alleviated the pain symptoms of OA by affecting the polarization of macrophages.

Calix[4]pyrrole-Based Azo-Bridged Porous Organic Polymer for Bromine Capture.

The toxicity, corrosiveness, and volatility of elemental bromine presents challenges for its safe storage and transportation. Purification from other halogens is also difficult. Here, we report an easy-to-prepare calix[4]pyrrole-based azo-bridged porous organic polymer (C4P-POP) that supports efficient bromine capture. C4P-POP was found to capture bromine as a vapor and from a cyclohexane source phase with maximum uptake capacities of 3.6 and 3.4 g·g-1, respectively. Flow-through adsorption experiments revealed that C4P-POP removes 80% of the bromine from a 4.0 mM cyclohexane solution at a flow rate of 45 mL·h-1. C4P-POP also allowed the selective capture of bromine from a 1:1 mixture of bromine and iodine in cyclohexane.

A sandwich-type electrochemical immunosensor for CYFRA 21-1 based on probe-confined in PtPd/polydopamine/hollow carbon spheres coupled with dendritic Au@Rh nanocrystals.

A signal-on sandwich-like electrochemical immunosensor was built for determination of cytokeratin 19 fragments 21-1 (CYFRA 21-1) in non-small cell lung cancer (NSCLC) by confining electroactive dye (e.g., methylene blue, MB) as a probe for amplifying signals. Specifically, core-shell gold@rhodium dendritic nanocrystals (Au@Rh DNCs) behaved as a substrate for primary antibody and accelerate interfacial electron transfer. Besides, hollow carbon spheres (HCSs) were subsequently modified with polydopamine (PDA) and PtPd nanoparticles for sequential integration of the secondary antibody and confinement of MB as a label, termed as MB/PtPd/PDA/HCSs for clarity. The built sensors showed a broad linear range (100 fg mL-1 ~ 100 ng mL-1) for detection of CYFRA 21-1 with an ultra-low detection limit (31.72 fg mL-1, S/N = 3), coupled with satisfactory performance in human serum samples. This work can be explored for assays of other proteins and provides some constructive insights for early and accurate diagnosis of NSCLC.

[Endophthalmitis Caused by Mixed Infections in Silicone Oil-filled Eye:One Case Report].

The incidence of endophthalmitis after vitrectomy is extremely low,especially lower in silicone oil-filled eyes.Silicone oil exerts a toxic effect on the cell membranes of microorganisms and leads to the lack of nutrients.It is thus believed to inhibit the growth of bacteria and fungi.Endophthalmitis induced by mixed bacteria in silicone oil-filled eye has been rarely reported.We reviewed the clinical manifestations,diagnosis,and treatment of a patient with endophthalmitis caused by mixed infection of Morganella morganii and Staphylococcus epidermidis in the silicone oil-filled eye,aiming to improve the understanding and diagnosis of mixed infections.

Deletion of Runx2 in condylar chondrocytes disrupts TMJ tissue homeostasis.

Runt-related transcription factor-2 (Runx2) is essential for chondrocyte maturation during cartilage development and embryonic mandibular condylar development. The process that chondrocytes, especially a subgroup of hypertrophic chondrocytes (HC), could transform into bone cells in mandibular condyle growth makes chondrocytes crucially important for normal endochondral bone formation. To determine whether Runx2 regulates postnatal condylar cartilage growth and tissue homeostasis, we deleted Runx2 in chondrocytes in postnatal mice and assessed the consequences on temporomandibular joint (TMJ) cartilage growth and remodeling. The cell lineage tracing data provide information demonstrating the role of chondrocytes in subchondral bone remodeling. The histologic and immunohistochemical data showed that Runx2 deficiency caused condylar tissue disorganization, including loss of HC and reduced hypertrophic zone, reduced proliferative chondrocytes, and decreased cartilage matrix production. Expression of Col10a1, Mmp13, Col2a1, Aggrecan, and Ihh was significantly reduced in Runx2 knockout mice. The findings of this study demonstrate that Runx2 is required for chondrocyte proliferation and hypertrophy in TMJ cartilage and postnatal TMJ cartilage growth and homeostasis, and that Runx2 may play an important role in regulation of chondrocyte-derived subchondral bone remodeling.

IFT20 is required for the maintenance of cartilaginous matrix in condylar cartilage.

Condylar cartilage is a joint cartilage essential for smooth jaw movement. The importance of ciliary proteins in condylar cartilage development has been reported. However, little is known about how ciliary proteins control the homeostasis of condylar cartilage. Here we show that intraflagellar transport 20 (IFT20), a ciliary protein, is required for the maintenance of cartilaginous matrix in condylar cartilage. Utilizing NG2-CreER mice expressed in condylar cartilage, we deleted Ift20 by tamoxifen treatment at juvenile-to-adult stages. In wild-type condylar cartilage, IFT20 was robustly produced in the cis-Golgi, but deletion of Ift20 by tamoxifen induction of NG2-CreER (Ift20:NG2-CreER) resulted in reduced cell proliferation and decreased Golgi size in condylar cartilage. Importantly, while the primary cilia were present in cartilage cells in the condylar layers of wild-type mice, no primary cilia were present in the Ift20:NG2-CreER condylar layers. Consistent with this finding, ciliary-mediated Hedgehog signaling was severely attenuated in Ift20 mutant chondrocytes, and thus the production levels of type X collagen were significantly reduced in Ift20:NG2-CreER mice. These results suggest that IFT20 is required for Golgi size and Hedgehog signaling to maintain cartilaginous matrix in condylar cartilage. Our study highlights the unique function of IFT20 in the homeostasis of condylar cartilage.

Oral pH sensitive GNS@ab nanoprobes for targeted therapy of Helicobacter pylori without disturbance gut microbiome.

How to eradicate Helicobacter pylori (H. pylori) in vivo with antibiotic resistance owns tremendous clinical requirement. Herein, gold nanostars were conjugated with acid-sensitive cis-aconitic anhydride modified anti-H. pylori polyclonal antibodies, resultant pH sensitive gold nanostars@H. pylori-antibodies nanoprobes (GNS@Ab) were employed for the theranostics of H. pylori in vivo. Photoacoustic imaging confirmed that prepared GNS@Ab could target actively H. pylori in the stomach. GNS@Ab nanoprobes could kill H. pylori in vivo in model animals under NIR laser irradiation, all GNS@Ab nanoprobes could be excreted out of gut within 7 days after oral administration. Gastric local lesion caused by H. pylori restored to normal status within one month. GNS@Ab nanoprobes within therapeutic doses did not damage intestinal bacteria imbalance. Forty clinical specimens of H. pylori with antibiotic resistance were verified validity of GNS@Ab nanoprobes. Prepared oral pH-sensitive GNS@Ab nanoprobes own clinical translational potential in the theranostics of H. pylori in near future.

Inhibition of Ihh Reverses Temporomandibular Joint Osteoarthritis via a PTH1R Signaling Dependent Mechanism.

The temporomandibular joint (TMJ), which is biomechanically related to dental occlusion, is often insulted by osteoarthritis (OA). This study was conducted to clarify the relationship between Indian hedgehog (Ihh) and parathyroid hormone receptor 1 (PTH1R) signaling in modulating the enhanced chondrocyte terminal differentiation in dental stimulated TMJ osteoarthritic cartilage. A gain- and loss-of-function strategy was used in an in vitro model in which fluid flow shear stress (FFSS) was applied, and in an in vivo model in which the unilateral anterior cross-bite (UAC) stimulation was adopted. Ihh and PTH1R signaling was modulated through treating the isolated chondrocytes with inhibitor/activator and via deleting Smoothened (Smo) and/or Pth1r genes in mice with the promoter gene of type 2 collagen (Col2-CreER) in the tamoxifen-inducible pattern. We found that both FFSS and UAC stimulation promoted the deep zone chondrocytes to undergo terminal differentiation, while cells in the superficial zone were robust. We demonstrated that the terminal differentiation process in deep zone chondrocytes promoted by FFSS and UAC was mediated by the enhanced Ihh signaling and declined PTH1R expression. The FFSS-promoted terminal differentiation was suppressed by administration of the Ihh inhibitor or PTH1R activator. The UAC-promoted chondrocytes terminal differentiation and OA-like lesions were rescued in Smo knockout, but were enhanced in Pth1r knockout mice. Importantly, the relieving effect of Smo knockout mice was attenuated when Pth1r knockout was also applied. Our data suggest a chondrocyte protective effect of suppressing Ihh signaling in TMJ OA cartilage which is dependent on PTH1R signaling.

Preparation and In vitro Evaluation of FDM 3D-Printed Ellipsoid-Shaped Gastric Floating Tablets with Low Infill Percentages.

The aim of the study is to investigate the feasibility of fabricating FDM 3D-printed gastric floating tablets with low infill percentages and the effect of infill percentage on the properties of gastric floating tablets in vitro. Propranolol hydrochloride was selected as a model drug, and drug-loaded polyvinyl alcohol (PVA) filaments were produced by hot melt extrusion (HME). Ellipsoid-shaped gastric floating tablets with low infill percentage of 15% and 25% (namely E-15 and E-25) were then prepared respectively by feeding the extruded filaments to FDM 3D printer. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) were employed to characterize the filaments and 3D-printed tablets, and a series of evaluations were performed to the 3D-printed tablets, including the weight variation, drug content, hardness, in vitro floating behavior, and drug release of the tablets. The SEM results showed that the drug-loaded filaments and 3D-printed tablets appeared intact without defects, and the printed tablets were composed of filaments deposited uniformly layer by layer. The model drug and the excipients were thermally stable under the process temperature of extruding and printing, with a small amount of drug crystals dispersing in the drug-loaded filaments and 3D-printed tablets. Both E-15 and E-25 could float on artificial gastric fluids without any lag time and released in a sustained manner. Compared with E-15, the E-25 presented less weight variation, higher tablet hardness, shorter floating time, and longer drug release time.

Physicochemical Analysis of DPPC and Photopolymerizable Liposomal Binary Mixture for Spatiotemporal Drug Release.

The development of a spatiotemporal drug delivery system with a long release profile, high loading efficiency, and robust therapeutic effects is still a challenge. Liposomal nanocarriers have secured a fortified position in the biomedical field over decades. Herein, liposomal binary mixtures of 1,2-dipalmitoyl- sn-glycero-3-phosphocholine (DPPC) and photopolymerizable 1,2-bis(10,12-tricosadiynoyl)- sn-glycero-3-phosphocholine (DC8,9PC) phospholipids were prepared for drug delivery applications. The diacetylenic groups of DC8,9PC produce intermolecular cross-linking following UV irradiation. Exposure of the liposomal mixture to 254 nm radiation induces a pore within the lipid bilayer, expediting the release of its entrapped 5,6-carboxyfluorescein dye. The dosage and rate of the released content are highly dependent on the number and size of the induced pore. Photochemical cross-linking studies at different exposure times were reported through the analysis of UV-visible spectrophotometry, nano differential scanning calorimetry, Fourier transform infrared spectroscopy, and Raman spectroscopy. The optimal irradiation time was established after 8 min of exposure, inducing lipid cross-linking with minimal oxidative degradation, which plays an essential role in the pathogenesis of numerous diseases due to the formation of primary and secondary oxidation products, accordingly reducing the encapsulated drug therapeutic level.

Fabrication of Polyimide Membrane Incorporated with Functional Graphene Oxide for CO2 Separation: The Effects of GO Surface Modification on Membrane Performance.

Two kinds of isocyanate were used to modify graphene oxide (GO) samples. Then, polyimide (PI) hybrid membranes containing GO and modified GO were prepared by in situ polymerization. The permeation of CO2 and N2 was studied using these novel membranes. The morphology experiments showed that the isocyanate groups were successfully grafted on the surface of GO by replacement of the oxygen-containing functional groups. After modification, the surface polarity of the GO increased, and more defect structures were introduced into the GO surface. This resulted in a good distribution of more modified GO samples in the PI polymer matrix. Thus, the PI hybrid membranes incorporated by modified GO samples showed a high gas permeability and ideal selectivity of membranes. In addition, enhancement of the selectivity due to the solubility of CO2 played a major role in the increase in the separation performance of the hybrid membranes for CO2, although the diffusion coefficients for CO2 also increased. Both the higher condensability and the strong affinity between CO2 molecules and GO in the polymer matrix caused an enhancement of the solubility selectivity higher than the diffusion selectivity after GO surface modification.

Omnidirectional Shape Memory Effect via Lyophilization of PEG Hydrogels.

Device applications of shape memory polymers demand diverse shape changing geometries, which are currently limited to non-omnidirectional movement. This restriction originates from traditional thermomechanical programming methods such as uniaxial, biaxial stretching, bending, or compression. A solvent-modulated programming method is reported to achieve an omnidirectional shape memory behavior. The method utilizes freeze drying of hydrogels of polyethylene glycol networks with a melting transition temperature around 50 °C in their dry state. Such a process creates temporarily fixed macroporosity, which collapses upon heating, leading to significant omnidirectional shrinkage. These shrunken materials can swell in water to form hydrogels again and the omnidirectional programming and recovery can be repeated. The fixity ratio (R f ) and recovery ratio (R r ) can be maintained at 90% and 98% respectively upon shape memory multicycling. The maximum linear recoverable strain, as limited by the maximum swelling, is ≈90%. Amongst various application potentials, one can envision the fabrication of multiphase composites by taking advantages of the omnidirectional shrinkage from a porous polymer to a denser structure.

Systemic administration of strontium or NBD peptide ameliorates early stage cartilage degradation of mouse mandibular condyles.

OBJECTIVE: To determine whether mandibular condylar cartilage degradation induced by experimentally abnormal occlusion could be ameliorated via systemic administration of strontium or NBD peptide. METHODS: Six-week-old female C57BL/6J mice were used. From the seventh day after mock operation or unilateral anterior crossbite (UAC) treatment, the control and UAC mice were further respectively pharmacologically treated for 2 weeks or 4 weeks of saline (CON + Saline and UAC + Saline groups), SrCl2 (CON + SrCl2 and UAC + SrCl2 groups) or NBD peptide (CON + NBD peptide and UAC + NBD peptide groups). Changes in condylar cartilage and subchondral bone were assessed 21 and 35 days after mock operation or UAC procedure by histology and micro-CT. Real-time PCR and/or immunohistochemistry (IHC) were performed to evaluate changes in expression levels of col2a1, aggrecan, ADAMTS-5, tnf-α, il-1ß, nfkbia, nuclear factor-kappaB phospho-p65 in condylar cartilage, and rankl/rank/opg in both condylar cartilage and subchondral bone. RESULTS: Cartilage degradation with decreased col2a1 and aggrecan expression, and increased ADAMTS-5, tnf-α/il1-ß, nfkbia and NF-κB phospho-p65 was observed in UAC + Saline groups. Subchondral bone loss with increased osteoclast numbers and decreased opg/rankl ratio was found in UAC + Saline groups compared to age-match CON + Saline groups. Cartilage degradation and subchondral bone loss were reversed by treatment of SrCl2 or NBD peptide while the same dosage in control mice induced few changes in condylar cartilage and subchondral bone. CONCLUSIONS: The results demonstrate reverse effect of systemic administration of strontium or NBD peptide on UAC-induced condylar cartilage degradation and subchondral bone loss.

Enhanced BMP signaling prevents degeneration and leads to endochondral ossification of Meckel's cartilage in mice.

Meckel's cartilage is a transient supporting tissue of the embryonic mandible in mammals, and disappears by taking different ultimate cell fate along the distal-proximal axis, with the majority (middle portion) undergoing degeneration and chondroclastic resorption. While a number of factors have been implicated in the degeneration and resorption processes, signaling pathways that trigger this degradation are currently unknown. BMP signaling has been implicated in almost every step of chondrogenesis. In this study, we used Noggin mutant mice as a model for gain-of-BMP signaling function to investigate the function of BMP signaling in Meckel's cartilage development, with a focus on the middle portion. We showed that Bmp2 and Bmp7 are expressed in early developing Meckels' cartilage, but their expression disappears thereafter. In contrast, Noggin is expressed constantly in Meckel's cartilage throughout the entire gestation period. In the absence of Noggin, Meckel's cartilage is significantly thickened attributing to dramatically elevated cell proliferation rate associated with enhanced phosphorylated Smad1/5/8 expression. Interestingly, instead of taking a degeneration fate, the middle portion of Meckel's cartilage in Noggin mutants undergoes chondrogenic differentiation and endochondral ossification contributing to the forming mandible. Chondrocyte-specific expression of a constitutively active form of BMPRIa but not BMPRIb leads to enlargement of Meckel's cartilage, phenocopying the consequence of Noggin deficiency. Our results demonstrate that elevated BMP signaling prevents degeneration and leads to endochondral ossification of Meckel's cartilage, and support the idea that withdrawal of BMP signaling is required for normal Meckel's cartilage development and ultimate cell fate.

Single-walled carbon nanotubes noncovalently functionalized with lipid modified polyethylenimine for siRNA delivery in vitro and in vivo.

siRNA can downregulate the expression of specific genes. However, delivery to specific cells and tissues in vivo presents significant challenges. Modified carbon nanotubes (CNTs) have been shown to protect siRNA and facilitate its entry into cells. However, simple and efficient methods to functionalize CNTs are needed. Here, noncovalent functionalization of CNTs is performed and shown to effectively deliver siRNA to target cells. Specifically, single-walled CNTs were functionalized by noncovalent association with a lipopolymer. The lipopolymer (DSPE-PEG) was composed of a phospholipid 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE) and poly(ethylene glycol) (PEG). Three different ratios of polyethylenimine (PEI) to DSPE-PEG were synthesized and characterized and the products were used to disperse CNTs. The resulting materials were used for siRNA delivery in vitro and in vivo. The structural, biophysical, and biological properties of DGI/C and their complexes formed with siRNA were investigated. Cytotoxicity of the materials was low, and effective gene silencing in B16-F10 cells was demonstrated in vitro. In addition, significant uptake of siRNA as well as gene silencing in the liver was found following intravenous injection. This approach provides a new strategy for siRNA delivery and could provide insight for the development of noncovalently functionalized CNTs for siRNA therapy.

Cells transiently expressing periostin are required for intramedullary intramembranous bone regeneration.

Intramembranous bone regeneration plays an important role in fixation of intramedullary implants used in joint replacement and dental implants used in tooth replacement. Despite widespread recognition of the importance of intramembranous bone regeneration in these clinical procedures, the underlying mechanisms have not been well explored. A previous study that examined transcriptomic profiles of regenerating bone from the marrow space showed that increased periostin gene expression preceded increases in several osteogenic genes. We therefore sought to determine the role of cells transiently expressing periostin in intramedullary intramembranous bone regeneration. We used a genetic mouse model that allows tamoxifen-inducible fluorescent labeling of periostin expressing cells. These mice underwent ablation of the bone marrow cavity through surgical disruption, a well-established intramembranous bone regeneration model. We found that in intact bones, fluorescently labeled cells were largely restricted to the periosteal surface of cortical bone and were absent in bone marrow. However, following surgical disruption of the bone marrow cavity, cells transiently expressing periostin were found within the regenerating tissue of the bone marrow compartment even though the cortical bone remained intact. The source of these cells is likely heterogenous, including cells occupying the periosteal surface as well as pericytes and endothelial cells within the marrow cavity. We also found that diphtheria toxin-mediated depletion of cells transiently expressing periostin at the time of surgery impaired intramembranous bone regeneration in mice. These data suggest a critical role of periostin expressing cells in intramedullary intramembranous bone regeneration and may lead to novel therapeutic interventions to accelerate or enhance implant fixation.

Analysis of Individualized Silicone Rubber Bolus Using Fan Beam Computed Tomography in Postmastectomy Radiotherapy: A Dosimetric Evaluation and Skin Acute Radiation Dermatitis Survey.

Objective: To investigate the dosimetric effects of using individualized silicone rubber (SR) bolus on the target area and organs at risk (OARs) during postmastectomy radiotherapy (PMRT), as well as evaluate skin acute radiation dermatitis (ARD). Methods: A retrospective study was performed on 30 patients with breast cancer. Each patient was prepared with an individualized SR bolus of 3 mm thickness. Fan-beam computed tomography (FBCT) was performed at the first and second fractions, and then once a week for a total of 5 times. Dosimetric metrics such as homogeneity index (HI), conformity index (CI), skin dose (SD), and OARs including the heart, lungs, and spinal cord were compared between the original plan and the FBCTs. The acute side effects were recorded. Results: In targets' dosimetric metrics, there were no significant differences in Dmean and V105% between planning computed tomography (CT) and actual treatments (P > .05), while the differences in D95%, V95%, HI, and CI were statistically significant (P < .05). In OARs, there were no significant differences between the Dmean, V5, and V20 of the affected lung, V5 of the heart and Dmax of the spinal cord (P > .05) except the V30 of affected lung, which was slightly lower than the planning CT (P < .05). In SD, both Dmax and Dmean in actual treatments were increased than plan A, and the difference was statistically significant (P < .05), while the skin-V20 and skin-V30 has no difference. Among the 30 patients, only one patient had no skin ARD, and 5 patients developed ARD of grade 2, while the remaining 24 patients were grade 1. Conclusion: The OR bolus showed good anastomoses and high interfraction reproducibility with the chest wall, and did not cause deformation during irradiation. It ensured accurate dose delivery of the target and OARs during the treatment, which may increase SD by over 101%. In this study, no cases of grade 3 skin ARD were observed. However, the potential of using OR bolus to reduce grade 1 and 2 skin ARD warrants further investigation with a larger sample size.

Osteocyte ß3 integrin promotes bone mass accrual and force-induced bone formation in mice.

Background: Cell culture studies demonstrate the importance of ß3 integrin in osteocyte mechanotransduction. However, the in vivo roles of osteocyte ß3 integrin in the regulation of bone homeostasis and mechanotransduction are poorly defined. Materials and methods: To study the in vivo role of osteocyte ß3 integrin in bone, we utilized the 10-kb Dmp1 (dentin matrix acidic phosphoprotein 1)-Cre to delete ß3 integrin expression in osteocyte in mice. Micro-computerized tomography (µCT), bone histomorphometry and in vitro cell culture experiments were performed to determine the effects of osteocyte ß3 integrin loss on bone mass accrual and biomechanical properties. In addition, in vivo tibial loading model was applied to study the possible involvement of osteocyte ß3 integrin in the mediation of bone mechanotransduction. Results: Deletion of ß3 integrin in osteocytes resulted in a low bone mass and impaired biomechanical properties in load-bearing long bones in adult mice. The loss of ß3 integrin led to abnormal cell morphology with reduced number and length of dentritic processes in osteocytes. Furthermore, osteocyte ß3 integrin loss did not impact the osteoclast formation, but significantly reduced the osteoblast-mediated bone formation rate and reduced the osteogenic differentiation of the bone marrow stromal cells in the bone microenvironment. In addition, mechanical loading failed to accelerate the anabolic bone formation in mutant mice. Conclusions: Our studies demonstrate the essential roles of osteocyte ß3 integrin in regulating bone mass and mechanotransduction.

Primulinajiulianshanensis, a new species of Gesneriaceae from Jiangxi Province, China.

Primulinajiulianshanensis F.Wen & G.L.Xu, a new species of Gesneriaceae from Jiulianshan National Nature Reserve of Jiangxi Province, China, is described and illustrated here. Molecular evidence showed it was sister to P.wenii Jian Li & L.J.Yan, while the morphological observation found clear differences between them, petiole, both sides of leaf blades, adaxial surface of the calyx lobes, corolla inside toward the bottom, bract margins covered glandular-pubescent hairs in P.jiulianshanensis (vs. no glandular-pubescent hairs in P.wenii); lateral bracts 4-9 × ca. 2 mm, the central one 2-5 × 1-1.5 mm, adaxially glabrous but sparsely pubescent at apex (vs. lateral bracts 14-16 × 2.5-3.0 mm, the central one 10-12 × 1.3-1.6 mm, all adaxially pubescent); calyx lobes 8-11 × ca. 2 mm, each side with several brown serrate teeth at apex (vs. 14-15 × ca. 2.5 mm, margin entire); filaments and staminodes sparsely yellow glandular-puberulent (vs. white, glabrous).