RESUMEN
Electrocaloric1,2 and electrostrictive3,4 effects concurrently exist in dielectric materials. Combining these two effects could achieve the lightweight, compact localized thermal management that is promised by electrocaloric refrigeration5. Despite a handful of numerical models and schematic presentations6,7, current electrocaloric refrigerators still rely on external accessories to drive the working bodies8-10 and hence result in a low device-level cooling power density and coefficient of performance (COP). Here we report an electrocaloric thin-film device that uses the electro-thermomechanical synergy provided by polymeric ferroelectrics. Under one-time a.c. electric stimulation, the device is thermally and mechanically cycled by the working body itself, resulting in an external-driver-free, self-cycling, soft refrigerator. The prototype offers a directly measured cooling power density of 6.5 W g-1 and a peak COP exceeding 58 under a zero temperature span. Being merely a 30-µm-thick polymer film, the device achieved a COP close to 24 under a 4 K temperature span in an open ambient environment (32% thermodynamic efficiency). Compared with passive cooling, the thin-film refrigerator could immediately induce an additional 17.5 K temperature drop against an electronic chip. The soft, polymeric refrigerator can sense, actuate and pump heat to provide automatic localized thermal management.
Asunto(s)
Polímeros , Refrigeración , Termodinámica , Refrigeración/instrumentación , Polímeros/química , Frío , Electricidad , Diseño de Equipo , Estimulación Eléctrica , TemperaturaRESUMEN
BACKGROUND: Tooth regeneration depends on the longevity of the dental epithelial lamina. However, the exact mechanism of dental lamina regression has not yet been clarified. To explore the role of the Sonic hedgehog (Shh) signaling pathway in regression process of the rudimentary successional dental lamina (RSDL) in mice, we orally administered a single dose of a Shh signaling pathway inhibitor to pregnant mice between embryonic day 13.0 (E13.0) and E17.0. RESULTS: We observed that the Shh signaling pathway inhibitor effectively inhibited the expression of Shh signaling pathway components and revitalized RSDL during E15.0-E17.0 by promoting cell proliferation. In addition, mRNA-seq, reverse transcription plus polymerase chain reaction (RT-qPCR), and immunohistochemical analyses indicated that diphyodontic dentition formation might be related to FGF signal up-regulation and the Sostdc1-Wnt negative feedback loop. CONCLUSIONS: Overall, our results indicated that the Shh signaling pathway may play an initial role in preventing further development of mouse RSDL in a time-dependent manner.
Asunto(s)
Dentición , Proteínas Hedgehog , Animales , Proliferación Celular/fisiología , Femenino , Proteínas Hedgehog/metabolismo , Ratones , Embarazo , Transducción de Señal/fisiologíaRESUMEN
BACKGROUND: In the period of the early implant placement, the socket is mainly occupied by provisional matrix (PM). Keratinized epithelium (KE) is critical for primary wound closure. Although both KE and PM are important, the detailed relationship among migrating KE, PM formation and indication of the early implant placement is still unclear. OBJECTIVE: This research aimed to locate a healing stage of KE with highest osteogenic PM formation after tooth extraction, which could be treated as the optimal time point for early implant placement. MATERIAL AND METHODS: Mice were sacrificed on days 1, 2, 3, 4 and 6 after incisor extraction. Clinical, histological, and immunohistochemical evaluations of the extraction sockets were performed, and statistical analyses were conducted. We then inserted implants into the PM with the greatest bioactivity and observed its osseointegration pattern for 3, 10, 17 and 30 days. RESULT: When KE fusion was reached, sockets were dominated by PM with the greatest expression of osteocalcin (OC, P < 0.05) and high levels of CD34 and Runx2. OC and Runx2 expression were positively correlated with KE coverage (P < 0.05). When the implant was inserted at 4 days' healing, the PM maintained its osteogenic ability, and osseointegration proceeded perfectly. CONCLUSION: The migration of KE was correlated with the formation of highly osteogenic and angiogenic PM. And the fusion of KE could be treated as an indication for early implant placement.
Asunto(s)
Implantación Dental Endoósea , Implantes Dentales , Animales , Ratones , Subunidad alfa 1 del Factor de Unión al Sitio Principal , Alveolo Dental/cirugía , Estética Dental , Oseointegración , Extracción DentalRESUMEN
Hard palate consists anteriorly of the palatal process of the maxilla (ppmx) and posteriorly of the palatal process of the palatine (ppp). Currently, palatal osteogenesis is receiving increasing attention. This is the first study to provide an overview of the osteogenesis process of the mouse hard palate. We found that the period in which avascular mesenchymal condensation becomes a vascularized bone structure corresponds to embryonic day (E) 14.5 to E16.5 in the hard palate. The ppmx and ppp differ remarkably in morphology and molecular respects during osteogenesis. Osteoclasts in the ppmx and ppp are heterogeneous. There was a multinucleated giant osteoclast on the bone surface at the lateral-nasal side of the ppmx, while osteoclasts in the ppp were more abundant and adjacent to blood vessels but were smaller and had fewer nuclei. In addition, bone remodeling in the hard palate was asymmetric and exclusively occurred on the nasal side of the hard palate at E18.5. During angiogenesis, CD31-positive endothelial cells were initially localized in the surrounding of palatal mesenchymal condensation and then invaded the condensation in a sprouting fashion. At the transcriptome level, we found 78 differentially expressed genes related to osteogenesis and angiogenesis between the ppmx and ppp. Fifty-five related genes were up/downregulated from E14.5 to E16.5. Here, we described the morphogenesis and the heterogeneity in the osteogenic and angiogenic genes profiles of the ppmx and ppp, which are significant for subsequent studies of normal and abnormal subjects.
Asunto(s)
Osteogénesis , Paladar Duro , Animales , Células Endoteliales , Maxilar , Ratones , Morfogénesis , Hueso PaladarRESUMEN
The repair of critical bone defects caused by various clinical conditions needs to be addressed urgently, and the regeneration of large bone defects depends on early vascularization. Therefore, enhanced vascularization of artificial bone grafts may be a promising strategy for the regeneration of critical-sized bone defects. Taking into account the importance of rapid angiogenesis during bone repair and the potential of piezoelectric stimulation in promoting bone regeneration, novel coaxial electrospun mats coupled with piezoelectric materials and angiogenic drugs were fabricated in this study using coaxial electrospinning technology, with a shell layer loaded with atorvastatin (AVT) and a core layer loaded with zinc oxide (ZnO). AVT was used as an angiogenesis inducer, and piezoelectric stimulation generated by the zinc oxide was used as an osteogenesis enhancer. The multifunctional mats were characterized in terms of morphology, core-shell structure, piezoelectric properties, drug release, and mechanical properties, and their osteogenic and angiogenic capabilities were validated in vivo and ex vivo. The results revealed that the coaxial electrospun mats exhibit a porous surface morphology and nanofibers with a core-shell structure, and the piezoelectricity of the mats improved with increasing ZnO content. Excellent biocompatibility, hydrophilicity and cell adhesion were observed in the multifunctional mats. Early and rapid release of AVT in the fibrous shell layer of the mat promoted angiogenesis in human umbilical vascular endothelial cells (HUVECs), whereas ZnO in the fibrous core layer harvested bioenergy and converted it into electrical energy to enhance osteogenic differentiation of rat bone mesenchymal stem cells (BMSCs), and both modalities synergistically promoted osteogenesis and angiogenesis. Furthermore, optimal bone regeneration was achieved in a model of critical bone defects in the rat mandible. This osteogenesis-promoting effect was induced by electrical stimulation via activation of the calcium signaling pathway. This multifunctional mat coupling piezoelectric stimulation and atorvastatin promotes angiogenesis and bone regeneration, and shows great potential in the treatment of large bone defects.
RESUMEN
As one of the most common clinical disorders, low back pain (LBP) influences patient quality of life and causes substantial social and economic burdens. Many factors can result in LBP, the most common of which is intervertebral disc degeneration (IDD). The progression of IDD cannot be alleviated by conservative or surgical treatments, and gene therapy, growth factor therapy, and cell therapy have their own limitations. Recently, research on the use of hydrogel biomaterials for the treatment of IDD has garnered great interest, and satisfactory treatment results have been achieved. This article describes the classification of hydrogels, the methods of decellularized extracellular matrix (dECM) production and the various types of gel formation. The current research on dECM hydrogels for the treatment of IDD is described in detail in this article. First, an overview of the material sources, decellularization methods, and gel formation methods is given. The focus is on research performed over the last three years, which mainly consists of bovine and porcine NP tissues, while for decellularization methods, combinations of several approaches are primarily used. dECM hydrogels have significantly improved mechanical properties after the polymers are cross-linked. The main effects of these gels include induction of stem cell differentiation to intervertebral disc (IVD) cells, good mechanical properties to restore IVD height after polymer cross-linking, and slow release of exosomes. Finally, the challenges and problems still faced by dECM hydrogels for the treatment of IDD are summarised, and potential solutions are proposed. This paper is the first to summarise the research on dECM hydrogels for the treatment of IDD and aims to provide a theoretical reference for subsequent studies.
Asunto(s)
Degeneración del Disco Intervertebral , Disco Intervertebral , Animales , Bovinos , Porcinos , Degeneración del Disco Intervertebral/terapia , Hidrogeles/farmacología , Matriz Extracelular Descelularizada , Calidad de Vida , Matriz Extracelular/metabolismoRESUMEN
OBJECTIVE: We investigated the correlation between bone cement distribution and adjacent vertebral fractures (AVFs) after percutaneous vertebroplasty (PVP). METHODS: We retrospectively analyzed patients who underwent single-segment PVP for osteoporotic compression fractures in our hospital from January 2016 to January 2021 and divided the patients into 2 groups, A and B, on the basis of the criterion of whether there were AVFs of the operated vertebrae within 1 year after surgery. We compared the general data of the 2 groups, assessed the ability of 3 simple X-ray-based evaluation methods to predict the occurrence of AVF within 1 year after surgery and derived a simple and accurate evaluation method. RESULTS: A total of 570 patients were included in this study: 511 patients in group A and 59 patients in group B. There were no statistical differences in the general data such as age, gender, and fracture site between the 2 groups. The posterior-anterior (PA), lateral (LAT), and PA and LAT methods showed receiver operating characteristic curve (ROC) predicted postoperative AVF of 0.611, 0.691, and 0.714, respectively. The difference between the area under curve (AUC) of the PA method and LAT method was statistically significant (P = 0.0307), the difference between the AUC of PA method and PA and LAT method was statistically significant (P < 0.001), and the difference between the AUC of LAT method and PA and LAT method was not statistically significant (P = 0.3308).There was no statistical difference between the 2 groups of patients with PA method point of 1 and statistically different between patients with points of 2 and 3. There was statistical difference in points of 1, 2 and 3 in the LAT method between the 2 groups. There was a positive correlation between cement distribution scores and AVF by linear regression analysis of the 3 evaluation methods. CONCLUSIONS: The 3 evaluation methods reliably predict AVF after PVP, with the LAT method, PA and LAT method being more predictive than the PA method, but the LAT method is simpler, with bone cement being widely distributed after crossing the midline in the PA method and contact with the upper and lower end plates in the LAT method being a risk factor for AVF.
Asunto(s)
Fracturas por Compresión , Fracturas Osteoporóticas , Fracturas de la Columna Vertebral , Vertebroplastia , Humanos , Vertebroplastia/efectos adversos , Vertebroplastia/métodos , Cementos para Huesos , Estudios Retrospectivos , Correlación de Datos , Fracturas Osteoporóticas/epidemiología , Fracturas Osteoporóticas/cirugía , Fracturas Osteoporóticas/complicaciones , Fracturas de la Columna Vertebral/diagnóstico por imagen , Fracturas de la Columna Vertebral/cirugía , Fracturas de la Columna Vertebral/epidemiología , Fracturas por Compresión/diagnóstico por imagen , Fracturas por Compresión/cirugía , Fracturas por Compresión/complicaciones , Resultado del TratamientoRESUMEN
Introduction: Congenital or acquired bone defects in the oral and cranio-maxillofacial (OCMF) regions can seriously affect the normal function and facial appearance of patients, and cause great harm to their physical and mental health. To achieve good bone defect repair results, the prosthesis requires good osteogenic ability, appropriate porosity, and precise three-dimensional shape. Tantalum (Ta) has better mechanical properties, osteogenic ability, and microstructure compared to Ti6Al4V, and has become a potential alternative material for bone repair. The bones in the OCMF region have unique shapes, and 3D printing technology is the preferred method for manufacturing personalized prosthesis with complex shapes and structures. The surface characteristics of materials, such as surface morphology, can affect the biological behavior of cells. Among them, nano-topographic surface modification can endow materials with unique surface properties such as wettability and large surface area, enhancing the adhesion of osteoblasts and thereby enhancing their osteogenic ability. Methods: This study used 3D-printed porous tantalum scaffolds, and constructed nano-topographic surface through hydrothermal treatment. Its osteogenic ability was verified through a series of in vitro and in vivo experiments. Results: The porous tantalum modified by nano-topographic surface can promote the proliferation and osteogenic differentiation of BMSCs, and accelerate the formation of new bone in the Angle of the mandible bone defect of rabbits. Discussion: It can be seen that 3D-printed nano-topographic surface modified porous tantalum has broad application prospects in the repair of OCMF bone defects.
RESUMEN
OBJECTIVE: To explore the biological reaction of swine acellular dermal matrix as a filling material for body surface deformity. METHODS: Xenogenic acellular dermal matrix was implanted into the hypoderm of rabbits. The implants were measured and observed with pathological and transmission electron microscopic technique at regular times. The results were compared with implantation of autologous dermis and swine dermis. RESULTS: The implanted xenogenic acellular dermal matrix and autologous dermis had slight inflammatory reaction. At 2 weeks there were fibroblasts and capillaries in the implants. The absorptivity of the xenogenic acellular dermal matrix was lower than the swine dermis. The xenogenic acellular dermal matrix was used in 2 clinical cases and obtained good result. CONCLUSION: The xenogenic acellular dermal matrix is an ideal material with good compatibility feature and low absorptivity.