The Saururus chinensis genome provides insights into the evolution of pollination strategies and herbaceousness in magnoliids.

Saururus chinensis, an herbaceous magnoliid without perianth, represents a clade of early-diverging angiosperms that have gone through woodiness-herbaceousness transition and pollination obstacles: the characteristic white leaves underneath inflorescence during flowering time are considered a substitute for perianth to attract insect pollinators. Here, using the newly sequenced S. chinensis genome, we revisited the phylogenetic position of magnoliids within mesangiosperms, and recovered a sister relationship for magnoliids and Chloranthales. By considering differentially expressed genes, we identified candidate genes that are involved in the morphogenesis of the white leaves in S. chinensis. Among those genes, we verified - in a transgenic experiment with Arabidopsis - that increasing the expression of the "pseudo-etiolation in light" gene (ScPEL) can inhibit the biosynthesis of chlorophyll. ScPEL is thus likely responsible for the switches between green and white leaves, suggesting that changes in gene expression may underlie the evolution of pollination strategies. Despite being an herbaceous plant, S. chinensis still has vascular cambium and maintains the potential for secondary growth as a woody plant, because the necessary machinery, i.e., the entire gene set involved in lignin biosynthesis, is well preserved. However, similar expression levels of two key genes (CCR and CAD) between the stem and other tissues in the lignin biosynthesis pathway are possibly associated with the herbaceous nature of S. chinensis. In conclusion, the S. chinensis genome provides valuable insights into the adaptive evolution of pollination in Saururaceae and reveals a possible mechanism for the evolution of herbaceousness in magnoliids.

Oral and oropharyngeal NUT carcinoma: a multicentre screening study of poorly differentiated oral cancer.

BACKGROUND AND AIMS: Nuclear protein testis (NUT) carcinoma (NC) is a rare and highly aggressive tumour characterised by chromosomal rearrangement of the nuclear protein testis family member 1 (NUTM1) gene, also known as the NUT gene. NC occurs mainly in the head and neck, mediastinum and lung. In general, primary NC in the oral cavity is extremely rare and reported sporadically. METHODS: A total of 111 formalin-fixed and paraffin-embedded specimens of poorly differentiated oral and oropharyngeal tumours were collected from 10 hospitals. NUT protein IHC staining was performed on these samples, and fluorescence in-situ hybridisation (FISH) and RNA sequencing detection were further carried out for NUT IHC-positive cases. RESULTS: The expression of NUT protein in tumour cells was detected in five cases (five of 111, 4.5%). The tumours in these cases were located in the oral floor, lip, base of the tongue, gingiva and hard palate. FISH detection results showed BRD4::NUT rearrangement in three patients and a non-BRD4::NUT rearrangement pattern in two patients. RNA sequencing results confirmed BRD4::NUT rearrangement in two cases. CONCLUSIONS: To our knowledge, this is the first and largest retrospective study of oral NC, and we found that NC is easily misdiagnosed as poorly differentiated oral squamous cell carcinoma (SCC) or poorly differentiated carcinoma. The morphology and immunophenotype of four NC cases were similar to SCC, and abrupt keratinisation was observed in three cases. Therefore, it is necessary to detect NUT protein for NC screening in oral malignant tumours with these morphologies, especially for young patients who are more likely to be misdiagnosed with other types of cancer.

Soft tissue inflammation around upper third molar cause limited mouth opening: common but overlooked.

OBJECTIVES: The aim of this study was to explore inflammation of soft tissue around the upper third molar as a prevalent cause of limited mouth opening, identify the clinical and radiographic features, and summarize the therapeutic effectiveness of tooth extraction. MATERIALS AND METHODS: A retrospective analysis of data from 264 patients with limited mouth opening over the last five years was performed. RESULTS: Among the 264 patients, 24 (9.1%) had inflammation of the soft tissue around the upper third molar, which was the second most common cause of limited mouth opening. Twenty-one of the twenty-four affected patients, with an average mouth opening of 19.1 ± 7.6 mm, underwent upper third molar extraction. Gingival tenderness around the upper third molar or maxillary tuberosity mucosa was a characteristic clinical manifestation (p < 0.05). The characteristic features on maxillofacial CT included soft tissue swelling around the upper third molar and gap narrowing between the maxillary nodules and the mandibular ascending branch. Post extraction, the average mouth opening increased to 31.4 ± 4.9 mm (p < 0.05), and follow-up CT demonstrated regression of the inflammatory soft tissue around the upper third molar. CONCLUSIONS: Inflammation of soft tissue around the upper third molar is a common cause of limited mouth opening. Symptoms of pain associated with the upper third molar and distinctive findings on enhanced maxillofacial CT scans are crucial for diagnosis. Upper third molar extraction yields favorable therapeutic outcomes. CLINICAL RELEVANCE: Inflammation of the soft tissue around the maxillary third molar commonly causes limited mouth opening, but this phenomenon has long been overlooked. Clarifying this etiology can reduce the number of misdiagnosed patients with restricted mouth opening and enable more efficient treatment for patients.

Roles of centrioles in neural attraction of dental pulp stem cells.

BACKGROUND/PURPOSE: Human nerve development is vital, affecting trauma recovery and dental issues. Early embryonic clues link nerves to tooth development via factors like Wnt and Hedgehog pathways. Centrosomes play a role, and centriole issues can disrupt oral development, as in oral facial digital syndrome type 1. This study aimed to delve deeper into the role and influence of centrioles on the development of dental nerves. METHODS: Cell migration assessed by co-culturing mouse neural tissue and human dental pulp stem cells (DPSCs). Centrioles were fluorescently stained, and their positions observed with confocal microscopy. Centrinone was employed to inhibit centriole activity, evaluating its impact on cell mobility under activity inhibition. RESULTS: As the distance between nerve tissue and DPSCs decreased, more DPSCs had centrioles near nerve tissue. Co-culture with nerve tissue increased DPSCs migration toward it. In contrast, DPSCs cultured alone or with fibroblasts showed weaker migration, indicating neural tissue's attractive influence. The addition of 125 nM centrinone halted cell migration and centriole polymerization. After centrinone removal over two days, centrioles returned to normal, suggesting continued motility inhibition. CONCLUSION: Centrioles direct cell movement and polarization. There are two scenarios: centrioles at the cell center with the nucleus moving backward (as in NIH3T3 cells) and both cells and centrioles moving forward (as in DPSCs). DPSCs' attraction to neural tissue may shed light on nerve guidance by tooth germs, aiding embryonic cell differentiation into nerves. However, further in vivo and in vitro studies are needed to confirm the specific mechanism.

3D-printed polycaprolactone scaffolds coated with beta tricalcium phosphate for bone regeneration.

BACKGROUND/PURPOSE: 3D-printing technology is an important tool for the bone tissue engineering (BTE). The aim of this study was to investigate the interaction of polycaprolactone (PCL) scaffolds and modified mesh PCL coated with beta TCP (PCL/ß-TCP) scaffolds with MG-63. METHODS: This study used the fused deposition modeling (FDM) technique with the 3D printing technique to fabricate the thermoplastic polymer and composite scaffolds. Scaffold structure and coating quality were observed under a scanning electron microscope (SEM). MG-63 cells were injected and attached to the mesh-manufactured PCL scaffolds. The biocompatibility of mesh structured PCL and PCL/ß-TCP scaffolds could be examined by measuring the viability of MG-63 cells of MTT assay. Bone cell differentiation was evaluated ALP activity by mineralization assay. RESULTS: The results showed that both mesh PCL scaffolds and PCL/ß-TCP scaffolds were non-toxic to the cells. The ALP activities of cells in PCL/ß-TCP scaffolds groups were significant differences and better than PCL groups in all groups at all experimental dates. The mineralization process was time-dependent, and significantly higher mineralization of osteosarcoma cells was observed on PCL/ß-TCP scaffolds at experimental dates. CONCLUSION: We concluded that both meshes structured PCL and PCL/ß-TCP scaffolds could promote the MG-63 cell growth, and PCL/ß-TCP was better than the PCL scaffolds for the outcome of MG63 cell differentiation and mineralization.

Micro-computed tomography analysis of calcium hydroxide delivery efficacy in C-shaped canal system of mandibular second molars.

BACKGROUND: Calcium hydroxide [Ca(OH)2] is widely accepted as a biocompatible interappointment intracanal medicament. This study aimed to analyze the efficacy of Ca(OH)2 placement into the C-shaped canal system of mandibular second molars using the syringe method with and without lentulo spiral utilizing micro-computed tomography (micro-CT). METHODS: Twenty-four extracted mandibular second molars were instrumented and classified into C-shaped floors (n = 12) and non-C-shaped floors (n = 12). Both groups were placed with Ca(OH)2 using the syringe system, then all teeth were scanned and cleaned, and placed with Ca(OH)2 again but with the syringe system followed by lentulo spiral and rescanned. The specimens were scanned using micro-CT to analyze the volume, volume percentage, uncontacted surface area, and uncontacted surface area percentage of Ca(OH)2 with the two delivery methods in the entire canal and at the apical 4 mm of the canal. Mann-Whitney test and Wilcoxon signed-rank test were used to determine the statistical differences among the groups. RESULTS: Syringe administration used in conjunction with lentulo spiral presented lower uncontacted surface area, a lower percentage of uncontacted surface area, larger volume, and a higher percentage of volume than syringe without lentulo spiral (P < 0.05). There was no significant difference between the C-shaped floor group and the non-C-shaped floor group (P > 0.05) in the Ca(OH)2 uncontacted surface area, volume, and percentages at different regions of canals and among different delivery techniques groups. CONCLUSIONS: The lentulo spiral and syringe technique combination can increase the volume and contacted surface area of Ca(OH)2 in the C-shaped canal system of mandibular second molars.

Cyclosporine A-induced gingival overgrowth in renal transplant patients accompanied by epithelial-to-mesenchymal transition.

OBJECTIVE: To investigate the association between the prevalence of cyclosporin A-induced gingival overgrowth and the expression of the epithelial-to-mesenchymal transition factors in the gingival tissues of renal transplant patients. BACKGROUND: Gingival overgrowth (GO) is a frequent complication in organ transplant patients treated with the immunosuppressant cyclosporin A (CsA). The epithelial-to-mesenchymal transition (EMT) is considered a factor contributing to CsA-induced GO. However, current knowledge on this topic is sparse. METHODS: Sixty-three renal transplant patients were divided into two groups according to the occurrence of GO: those with gingival overgrowth (GO+ group) and those without gingival overgrowth (GO- group). Data on age, sex, and use of immunosuppressant and calcium channel blocker medications, serum creatinine values, peak concentrations of blood CsA, and gingival hyperplasia scores were recorded to identify clinically pathogenic factors. Gingival tissues from five patients with CsA-induced GO and five healthy subjects were selected for histomorphological observation with hematoxylin-eosin staining, Masson staining, and immunohistochemical staining. The mRNA expression of EMT factors was detected with reverse transcription-quantitative PCR. RESULTS: The use of CsA significantly increased the prevalence of GO in renal transplant patients. The expression of α-SMA, SMAD4, and TGM2 was upregulated and that of E-cadherin was downregulated in the gingival tissues of patients with CsA-induced GO compared with those of the corresponding controls. CONCLUSION: Treatment with CsA is closely related to the occurrence of GO in renal transplant patients and EMT plays an important role in CsA-induced gingival tissue hyperplasia.

Magnetic molecularly imprinted polymer based on dynamically established metal-mediated binding sites for the determination of trace captopril in rat plasma.

Therapeutic drug monitoring of captopril, which is a commonly used antihypertensive agent in clinical practice, is necessary. However, matrix effect-induced pretreatment is the bottleneck for determination. Metal-mediated molecularly imprinted polymers, an essential branch of molecularly imprinted polymers with better specificity and selectivity, have been used to separate/enrich analytes from complex matrices. In this work, Cu2+ was introduced to dynamically establish the binding sites of metal-mediated molecularly imprinted polymer towards captopril. All evidence demonstrated that the metal-mediated molecularly imprinted polymer based on Cu2+ coordination obtained a higher adsorption capacity (81.23 mg/g), faster adsorption rate (adsorption equilibrium within 50 min), and better selectivity (with the unrecognized analog). Subsequently, the Cu2+ -mediated molecularly imprinted polymer was used as dispersive molecularly imprinted solid-phase extraction to successfully establish an analytical platform for the determination of trace captopril in rat plasma. The enrichment factor was up to 20, the detection limit was as low as 0.16 µg/ml, and the average recovery was in the range of 87.51%-98.28% with a relative standard deviation of less than 3.29%. This study provides a promising reference for the preparation of selective adsorbents to improve pretreatment.

Elective Neck Dissection Improves Regional Control in cN0 Minor Salivary Gland Carcinoma in the Oral Cavity.

PURPOSE: Consensus regarding whether elective neck dissection (END) provides better outcomes than observation in clinically node negative (cN0) minor salivary gland (MSG) carcinoma is lacking. Therefore, this study aimed to compare the impact of END with that of observation on regional control (RC) and overall survival (OS) and to detect the predictors for lymph-node metastasis in oral MSG carcinoma. PATIENTS AND METHODS: A single-institution, retrospective cohort study was designed; it included patients with cN0 oral MSG carcinoma treated at a tertiary teaching hospital between January 2002 and January 2022. The primary predictor variable was END and primary outcome variables were RC and OS. The secondary outcome variable was lymph-node metastasis. Other covariates included demographic and pathologic features, TNM stage, and adjuvant treatment. The Kaplan-Meier method and Cox proportional hazards model were used to determine the effect of END on RC and OS. The chi-squared test and logistic regression models were used to identify independent predictors for lymph-node metastasis. RESULTS: A total of 268 patients (107 men and 161 women) with a mean age of 46.4 ± 15.5 years were included. The 5-year RC rate was statistically different between the observation and END groups (75%; 95% confidence interval [CI], 67%-83; 95% CI, 81%-93%, respectively; P = .014). Cox regression analysis confirmed that END (hazard ratio [HR] 2.395; 95% CI: 1.433-8.275; P = .034) was independently associated with a decreased risk of regional recurrence. The 5-year OS rates for the observation and END groups were 66% (95% CI, 56-76%) and 76% (95% CI, 66-86%), respectively, and the difference was not statistical (P = .057). Occult metastasis occurred in 24.6% of patients. Primary tumor location on the tongue/floor of the mouth (odds ratio [OR], 4.287; 95% CI, 1.773-9.125; P = .011), T3/4 stage (OR, 3.286; 95% CI, 1.228-8.253; P = .021), and high-grade disease (OR, 6.674; 95% CI, 2.199-14.326; P < .001) were independently associated with an increased risk of occult metastasis. CONCLUSIONS: RC was better with END than with observation, but OS was comparable with the two approaches. Primary tumor location on tongue/floor of the mouth, T3/4 stage, and high-grade disease were associated with an increased risk of lymph-node metastasis.

Comparison of periodontal health of primary teeth restored with zirconia and stainless steel crowns: A systemic review and meta-analysis.

BACKGROUND/PURPOSE: In children, the use of stainless steel crowns to treat caries has a high success rate. However, due to the unnatural color of stainless steel crowns, it still needs to modify crown types. The present meta-analysis study aims to explore the previous articles on the comparison of stainless steel crowns and zirconia crowns. METHODS: The systematic search of studies on the comparison of zirconia crowns and stainless steel crowns for primary teeth was mainly in PubMed and Cochrane database. The standardized mean differences (SMDs) of gingival health between zirconia crowns and stainless steel crowns comprised the primary outcome, and the SMDs of plaque index compared two crown treatments was treated as the secondary outcome. RESULTS: The meta-analysis extracted 187 papers from various databases and collected five randomized controlled trials, four comparisons on deciduous molars and one comparison on deciduous incisors. 160 children were included, ranging in age from 3-9 years old. The quantitative analysis showed a significantly lower gingival index of zirconia crowns in the primary molar group and the primary incisor group. The plaque index between two crown treatments groups was -4.51, indicating less accumulation of plaque on zirconia crown. However, the heterogeneity of included trials still need to be considered. CONCLUSION: Zirconia crowns for deciduous teeth had its advantages for gingival health. Although stainless steel crowns were more likely to have plaque deposition and gingival inflammation, zirconia crowns relatively caused the opposite tooth wearing and chipping. Therefore, the comprehensive consideration is important to choose deciduous tooth crown.

Efficacy of polyacrylate silver salt/polyvinylpyrrolidone-based liquid oral gel in management of concurrence chemoradiotherapy-induced oral mucositis.

BACKGROUND/PURPOSE: Acute oral mucositis (OM) is a painful complication of concurrent chemoradiotherapy (CCRT). This severe adverse symptom may impact on patient's quality of life, lead to malnutrition. Thus, finding more effective methods in OM management is very important. The purpose of this study is to evaluate the efficacy of polyacrylate silver salt/Polyvinylpyrrolidone-based liquid oral gel (named as polyacrylate silver salt oral gel) in improving the symptomatic relief of CCRT-induced oral mucositis and oral dysfunction in neck and head cancer patients. METHODS: In this study, 24 oral cancer patients underwent CCRT and having OM grade 2 or higher were randomly assigned into the test group and the control group. Both groups followed Multinational Association of Supportive Care in Cancer and International Society of Oral Oncology (MASCC/ISOO) clinical practice guidelines for the management of mucositis, but adding rinsing with 15 g oral gel right after oral hygiene treaded the test group. Clinical OM and oral function were assessed weekly for 4 consecutive weeks till 5-10 days after the completion of radiotherapy. For evaluation, Common Terminology Criteria for Adverse Events (CTCAE) v3.0 was used for collecting the data of OM grade. RESULTS: The results showed that polyacrylate silver salt oral gel had better effect for relieving the oral mucositis. There were statistically significant differences in OM grades (1.59 vs. 2.8, p < 0.0001) between the test group and the control group. CONCLUSION: Our clinical studies demonstrated that polyacrylate silver salt oral gel is an effective interventional option in terms of rapid mucositis healing.

Novel application of absorbable gelatine sponge combined with polyurethane film for dermal reconstruction of wounds with bone or tendon exposure.

Trauma, burns, and diabetes result in nonhealing wounds that can cause bone or tendon exposure, a significant health threat. The use of an artificial regeneration template combined with skin grafting as an alternative method to highly invasive flap surgery has been shown to be an effective way to cover full-thickness skin defects with bone or tendon exposure for both functional and aesthetic recovery. However, artificial regeneration templates, such as Pelnac, are overwhelmingly expensive, limiting their clinical use. Here, we demonstrate for the first time that polyurethane film combined with absorbable gelatine sponge, affordable materials widely used for haemostasis, are effective for dermal reconstruction in wounds with bone or tendon exposure. The absorbable gelatine sponge combined with polyurethane film was applied to eight patients, all resulting in adequate granulation that fully covered the exposed bone or tendon. The outcome of absorbable gelatine sponge combined with polyurethane film application indicates that this approach is a potential novel and cost-effective dermal reconstruction strategy for the treatment of severe wounds with bone or tendon exposure.

Non-equilibrium Nanoassemblies Constructed by Confined Coordination on a Polymer Chain.

Biological systems employ non-equilibrium self-assembly to create ordered nanoarchitectures with sophisticated functions. However, it is challenging to construct artificial non-equilibrium nanoassemblies due to lack of control over assembly dynamics and kinetics. Herein, we design a series of linear polymers with different side groups for further coordination-driven self-assembly based on shape-complementarity. Such a design introduces a main-chain confinement which effectively slows down the assembly process of side groups, thus allowing us to monitor the real-time evolution of lychee-like nanostructures. The function related to the non-equilibrium nature is further explored by performing photothermal conversion study. The ability to observe and capture non-equilibrium states in this supramolecular system will enhance our understanding of the thermodynamic and kinetic features as well as functions of living systems.

Antifouling Electrochemical Biosensor Based on the Designed Functional Peptide and the Electrodeposited Conducting Polymer for CTC Analysis in Human Blood.

Circulating tumor cells (CTCs) are considered reliable cancer biomarkers for the liquid biopsy of many types of tumors. The direct detection of CTCs in human blood with normal biosensors, however, remains challenging because of severe biofouling in blood that contains various proteins and a large number of cells. Herein, we report the construction of an antifouling electrochemical biosensor capable of assaying CTCs directly in blood, based on a designed multifunctional peptide and the electrodeposited conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). The designed peptide possesses antifouling capability in complex biological media and specific recognition ability to capture breast cancer cells MCF-7. Meanwhile, electrodeposited PEDOT can promote electron transfer at the sensing interface, improve the signal-to-noise ratio for the detection, and thus enhance the sensitivity of the biosensor. The integration of the multifunctional peptide and conducting polymer PEDOT ensures that the developed biosensor is able to perform directly in blood samples without purification or separation. The antifouling electrochemical biosensor for the detection of MCF-7 cells exhibits a wide linear range over 4 orders, with a limit of detection (LOD) of 17 cells mL-1. More interestingly, even when performing in 25% human blood, the biosensor still retains a linear response with an LOD of 22 cells mL-1, without suffering significantly from biofouling in real blood. This work provides a promising strategy for the direct analysis of CTCs in human blood without a complicated pretreatment, and it may find practical application in the liquid biopsy of cancers.

Cerebral hemorrhage caused by shaking adult syndrome? Evidence from biomechanical analysis using 3D motion capture and finite element models.

The present study combined three-dimensional (3D) motion capture with finite element simulation to reconstruct a real shaking adult syndrome (SAS) case and further explore the injury biomechanics of SAS. The frequency at which an adult male can shake the head of another person, head-shaking amplitude, and displacement curves was captured by the VICON 3D motion capture system. The captured shaking frequency and shaking curve were loaded on the total human model for safety (THUMS) head to simulate the biomechanical response of brain injury when a head was shaken in anterior-posterior, left-right, and left anterior-right posterior directions at frequencies of 4 Hz (Hz), 5 Hz, 6 Hz, and 7 Hz. The biomechanical response of the head on impact in the anterior, posterior, left, left anterior, and right posterior directions at the equivalent velocity of 6 Hz shaking was simulated. The violent shaking frequency of the adult male was 3.2-6.8 Hz; head shaking at these frequencies could result in serious cerebral injuries. SAS-related injuries have obvious directionality, and sagittal shaking can easily cause brain injuries. There was no significant difference between the brain injuries caused by shaking in the simulated frequency range (4-7 Hz). Impact and shaking at an equivalent velocity could cause brain injuries, though SAS more commonly occurred due to the cumulative deformation of brain tissue. Biomechanical studies of SAS should play a positive role in improving the accuracy of forensic identification and reducing this form of abuse and torture in detention or places of imprisonment.

Micro-computed tomography analysis of root canal morphology and thickness of crown and root of mandibular incisors in Chinese population.

OBJECTIVES: The aim of this study was to investigate the root canal morphology and the thickness of crown and root of mandibular incisors in a Chinese subpopulation by micro-computed tomography (micro-CT). METHODS: In total, 208 mandibular incisors were scanned using micro-CT. The anatomical features of the canals (canal configuration, apical constriction, foramen-to-apex distance, accessory canal vertical distribution, and canal geometrical parameters) and the thickness of the crown and root 2/3 were evaluated. RESULTS: Three canal categories, labeled as Single (77.88%), Merged (15.87%), and Separated (6.25%), were summarized. The most frequent constriction type in main foramina was single constriction (42.53%). Wide and narrow diameters in a single main foramen were 0.37 ± 0.14 mm and 0.26 ± 0.07 mm, respectively. The distance from the anatomical foramen to the physiological foramen and the anatomical apex was 0.49 ± 0.20 mm and 0.36 ± 0.28 mm, respectively. During the virtual root-end resection, 97.12% of roots underwent successful resection at the 2-mm level, with the foramina visible on the resection surface. During 2-D cross-sectional analyses, the shape parameters of the root and canal showed significant positive correlation (P < 0.05). The thickest and thinnest walls were the incisal and proximal walls (P < 0.05) of the crown, respectively. The buccal walls were significantly thicker than the lingual walls on the crown (P < 0.05), whereas the lingual walls were thicker on the root 2/3 (P < 0.05). CONCLUSIONS: This study provides detailed information about the root canal morphology and thickness of the crown and root of mandibular incisors in a Chinese population. An understanding of morphology can benefit endodontic treatment. CLINICAL RELEVANCE: Adequate knowledge of the crown, root, and canal morphology, as well as the thickness distribution of the crown and root, is essential for successful root canal therapy and prevention of complications.

Sequential digital occlusal analysis in patients with skeletal Class III malocclusion with orthognathic surgery: Surgery-first vs orthodontic-first approach.

INTRODUCTION: This study compared changes in occlusal characteristics in patients with skeletal Class III malocclusion with surgery-first approach (SFA) and those with orthodontic-first approach (OFA) through digital occlusal analysis. METHODS: In this prospective study, 90 consecutive subjects were divided into control, OFA, and SFA groups (30 per group). Force discrepancy, occlusal time, tooth contact, center of force, and force-time graph pattern were calculated for all samples using the T-Scan III system. Between-group differences were analyzed using a 1-way analysis of variance and generalized estimating equations. These parameters were calculated at the following time points: preoperatively, 1-month postoperatively (T1), 4-months postoperatively, and 1-year postoperatively (T3). RESULTS: No significant differences were observed in the parameters between the experimental groups. The force discrepancy of the OFA and SFA groups decreased, approaching the value of controls at T3. The occlusal time significantly increased at T1 and progressively decreased at T3. The initial contact and maximum force were most frequently observed on molars, and its maximum force significantly decreased by 5.72% and 7.40% in the OFA and SFA groups at T3, respectively. The number of tooth contact was significantly reduced at T1 and gradually increased at T3. Moreover, after surgery, the force-time graph pattern was normalized, and the center of force tended to be more centric; however, the most frequent trajectory revealed premature contact during closing. CONCLUSIONS: No significant difference was found in all parameters between the OFA and SFA groups. Occlusion deteriorated at 1 month postoperatively but gradually improved at 1 year postoperatively, approaching the controls.

Electrochemical Biosensor with Enhanced Antifouling Capability Based on Amyloid-like Bovine Serum Albumin and a Conducting Polymer for Ultrasensitive Detection of Proteins in Human Serum.

Biofouling has been a substantial burden on biomarker analysis in complex biological media, leading to poor sensitivity and selectivity or even malfunction of the sensing devices. In this work, an electrochemical biosensor with excellent antifouling ability and high stability was fabricated based on amyloid-like bovine serum albumin (AL-BSA) crosslinked with the conducting polymer polyaniline (PANI). Compared with the crosslinked conventional bovine serum albumin (BSA), the crosslinked AL-BSA exhibited enhanced antifouling capability, and it was able to form an effective antifouling film within a significantly short reaction time. With further immobilization of immunoglobulin M (IgM) antibodies onto the prepared AL-BSA surface via the formation of amide bonds, an electrochemical biosensor capable of assaying IgM in human serum samples with superior selectivity and sensitivity was constructed. The biosensor exhibited excellent antifouling performance even in 100% human serum, a low limit of detection down to 2.32 pg mL-1, and acceptable accuracy for real sample analysis compared with the standard enzyme-linked immunosorbent assay for IgM detection. This strategy of using AL-BSA to construct antifouling sensing interfaces provided a reliable diagnostic method for the detection of a series of protein biomarkers in complex biological media.

VAPYRIN attenuates defence by repressing PR gene induction and localized lignin accumulation during arbuscular mycorrhizal symbiosis of Petunia hybrida.

The intimate association of host and fungus in arbuscular mycorrhizal (AM) symbiosis can potentially trigger induction of host defence mechanisms against the fungus, implying that successful symbiosis requires suppression of defence. We addressed this phenomenon by using AM-defective vapyrin (vpy) mutants in Petunia hybrida, including a new allele (vpy-3) with a transposon insertion close to the ATG start codon. We explore whether abortion of fungal infection in vpy mutants is associated with the induction of defence markers, such as cell wall alterations, accumulation of reactive oxygen species (ROS), defence hormones and induction of pathogenesis-related (PR) genes. We show that vpy mutants exhibit a strong resistance against intracellular colonization, which is associated with the generation of cell wall appositions (papillae) with lignin impregnation at fungal entry sites, while no accumulation of defence hormones, ROS or callose was observed. Systematic analysis of PR gene expression revealed that several PR genes are induced in mycorrhizal roots of the wild-type, and even more in vpy plants. Some PR genes are induced exclusively in vpy mutants. Our results suggest that VPY is involved in avoiding or suppressing the induction of a cellular defence syndrome that involves localized lignin deposition and PR gene induction.

Sporadic hand, foot, and mouth disease cases associated with non-C4 enterovirus 71 strains in Xiamen, China, from 2009 to 2018.

Enterovirus 71 (EV71) has caused large hand, foot, and mouth disease (HFMD) epidemics among young children, and EV71 infection is the leading cause of severe HFMD cases and deaths. In mainland China, the prevalence and risk factors of non-C4 EV71 strains are still unclear. In this study, we monitored non-C4 strains over a 10-year HFMD epidemiological surveillance period in Xiamen. The 5'UTR and VP1 coding region of EV71 strains were amplified by RT-nested PCR and sequenced. Thirty-two non-C4 EV71 strains were identified during 2009-2018. This study provides important information about the prevalence of EV71 in China that will be applicable for development of vaccines and diagnostic reagents as well as establishment of policies for HFMD prevention and control.