Polyethylenimine mediated silver nanoparticle-decorated magnetic graphene as a promising photothermal antibacterial agent.

A novel bactericidal material, Ag@rGO-Fe3O4-PEI composite is prepared by in situ growth of silver nanoparticles onto the polyethylenimine (PEI)-mediated magnetic reduced graphene oxide (GO). The antibacterial performances of the composite are investigated by using the gram-negative bacteria Escherichia coli O157:H7 (E. coli O157:H7) as a model. The results indicate that the Ag@rGO-Fe3O4-PEI composite exhibits excellent antibacterial performance against E. coli O157:H7, with an antibacterial performance superior to those for the ever-reported photothermal materials. The bactericidal capability or the inhibition capability for bacteria growth is found to depend on the dosage of the Ag@rGO-Fe3O4-PEI and Ag/rGO-Fe3O4-PEI mass ratio within a certain range. By using a dosage of 0.1 µg mL(-1), a killing rate of 99.9% is achieved for the E. coli O157:H7 (1 × 10(7) cfu mL(-1)) under a 0.5 min NIR laser irradiation (785 nm/50 mW cm(-2)). In addition, a minimum bactericidal concentration (MBC) of 0.100 µg mL(-1) is achieved under near infrared (NIR) laser irradiation for 10 min, for which case there is absolutely no colony of E. coli O157:H7 found in the broth agar plate.

Tracking and imaging nano-plastics in fresh plant using cryogenic laser ablation inductively coupled plasma mass spectrometry.

Tracking and imaging of nano-plastics are extremely challenging, especially in fresh biological samples. Here, we propose a new strategy in which polystyrene (PS) was doped with the europium chelate Eu (DBM)3bpy to quantify, track, and in situ image nano-plastics in fresh cucumber based on inherent metals using cryogenic laser ablation inductively coupled plasma mass spectrometry (cryo-LA-ICP-MS). The cryogenic conditions provide a stable condition for imaging fresh cucumber, suppressing the evaporation of water in fresh plants, and maintaining the original structure of plants with respect to room temperature imaging in LA-ICP-MS. The plants were cultivated in two types of nano-plastics solutions with low (50 mg/L) and high (200 mg/L) concentrations for 9 days. The results showed that nano-plastics mainly enrich the roots and have negative effects, which decrease the trace elements of Zn, Mn, and Cu in cucumber. Smaller PS particles are able to penetrate the plant more easily and inflict serious damage. Novel imaging method provides a novel insight into the tracking and imaging of nano-plastics in fresh plant samples. The results illustrated that nano-plastics deposition on plants has the potential to have direct ecological effects as well as consequences for potential health.

Conjugation of quantum dots with graphene for fluorescence imaging of live cells.

It is difficult to achieve fluorescent graphene-quantum dots (QDs) conjugation because graphene quenches the fluorescence of the QDs. In the present study, the conjugation of graphene (reduced graphene oxide, RGO) with QDs via a bridge of bovine serum albumin (BSA) provides a novel highly fluorescent nano probe for the first time. BSA capped QDs are firmly grafted onto polyethylenimine (PEI)/poly(sodium 4-styrenesulfonate) (PSS) coated RGO (graphene-QDs) via electrostatic layer by layer assembly. The strong luminescence of the graphene-QDs provides a potential for non-invasive optical in vitro imaging. The graphene-QDs are used for in vitro imaging of live human carcinoma (Hela) cells. Graphene-QDs could be readily up-taken by Hela cells in the absence of specific targeting molecules, e.g., antibodies or folic acid, and no in vitro cytotoxicity is observed at 360 µg mL(-1) of the graphene-QDs. The results for the imaging of live cells indicated that the cell-penetrating graphene-QDs could be a promising nano probe for intracellular imaging and therapeutic applications.

Recent Advances in Nanomaterials for Analysis of Trace Heavy Metals.

In an effort to achieve high sensitivity analysis methods for ultra-trace levels of heavy metals, numerous new nanomaterials are explored for the application in preconcentration processes and sensing systems. Nanomaterial-based methods have proven to be effective for selective analysis and speciation of heavy metals in combination with spectrometric techniques. This review outlined the different types of nanomaterials applied in the field of heavy metal analysis, and concentrated on the latest developments in various new materials. In particular, the functionalization of traditional materials and the exploitation of bio-functional materials could increase the specificity to target metals. The hybridization of multiple materials could improve material properties, to build novel sensor system or achieve detection-removal integration. Finally, we discussed the future perspectives of nanomaterials in the heavy metal preconcentration and sensor design, as well as their respective advantages and challenges. Despite impressive progress and widespread attention, the development of new nanomaterials and nanotechnology is still hampered by numerous challenges, particularly in the specificity to the target and the anti-interference performance in complex matrices.

Terbium doping of graphitic carbon nitride endows a highly sensitive ratiometric fluorescence assay of alkaline phosphatase.

Terbium doped graphitic carbon nitride (g-C3N4:Tb) gives rise to two exceptional emissions at λex/λem = 290/490 nm and 290/546 nm, with extremely narrow peak widths of FWHM < 12 nm as well as a large Stokes shift of >200 nm. The modification of g-C3N4:Tb with HOOC-PEG-COOH provides a ratiometric fluorescent probe which ensures highly sensitive detection of alkaline phosphatase (ALP) activity based on the inner filter effect (IFE).

Iron-chelated thermoresponsive polymer brushes on bismuth titanate nanosheets for metal affinity separation of phosphoproteins.

Separation of phosphoproteins plays an important role for identification of biomarkers in life science. In this work, bismuth titanate supported, iron-chelated thermoresponsive polymer brushes were prepared for selective separation of phosphoproteins. The iron-chelated thermoresponsive polymer brushes were synthesized by surface-initiated atom transfer radical polymerization of N-isopropylacrylamide and glycidyl methacrylate, followed by a ring opening reaction of epoxy group, and chelation of the obtained cis-diols with Fe3+ ions. The composite material was characterized to determine the size and thickness, the content of the organic polymer and the metal loading. The bismuth titanate supported, iron-chelated thermoresponsive polymer brushes showed selective binding for phosphoproteins in the presence of abundant interfering proteins, and a high binding capacity for phosphoproteins by virtue of the metal affinity between the metal ions on the polymer brushes and the phosphate groups in the phosphoproteins (664 mg ß-Casein per g sorbent). The thermoresponsive property of the polymer brushes made it possible to adjust phosphoprotein binding by changing temperature. Finally, separation of phosphoproteins from a complex biological sample (i.e. milk) was demonstrated using the nanosheet-supported thermoresponsive polymer brushes.

CuS@PDA-FA nanocomposites: a dual stimuli-responsive DOX delivery vehicle with ultrahigh loading level for synergistic photothermal-chemotherapies on breast cancer.

In this study, CuS@PDA nanoparticles were synthesized and used to create a novel tumor-targeting nanocomposite platform composed of copper sulfide@polydopamine-folic acid/doxorubicin (CuS@PDA-FA/DOX) for performing both photothermal and chemotherapeutic cancer treatment. The nanocomposite platform has ultrahigh loading levels (4.2 ± 0.2 mg mg-1) and a greater photothermal conversion efficiency (η = 42.7%) than CuS/PDA alone. The uptake of CuS@PDA-FA/DOX nanocomposites is much higher in MCF-7 cells than in A549 cells because MCF-7 cells have much higher folic acid receptors than A549. Under near infrared (NIR) irradiation, the CuS@PDA-FA/DOX system using a synergistic combination of photothermal therapy and chemotherapy yields a better therapeutic effect than either photothermal therapy or chemotherapy alone. The treatment is very effective with the cell viability is only 5.6 ± 1.4%.

PEGylated titanate nanosheets: hydrophilic monolayers with a superior capacity for the selective isolation of immunoglobulin G.

A novel organic-inorganic hybrid was prepared by anchoring (3-aminopropyl)triethoxysilane (APTES) on the surface of monolayer titanate nanosheets and subsequent modification with hydrophilic polyethylene glycol (PEG). The PEGylated hydrophilic monolayer titanate nanosheets were abbreviated as PEG-APTES-TiNSs, and they exhibit a lateral dimension of dozens of nanometers and a thickness of ca. 1.9 nm. PEGylation of the titanate nanosheets significantly improved their selectivity toward the adsorption of glycoproteins through strong hydrophilic interaction, providing an adsorption capacity of 2540.9 mg g-1 for immunoglobulin G (IgG). The retained IgG is readily collected at a recovery rate of 83.4% with 0.5% (m/v) ammonium hydroxide (NH4OH) as the stripping reagent. PEG-APTES-TiNSs are applied for the selective adsorption of IgG from human serum, which is further confirmed by SDS-PAGE assay.

Selenium adsorption and speciation with Mg-FeCO3 layered double hydroxides loaded cellulose fibre.

A novel adsorbent was developed by coating Mg-FeCO(3) layered double hydroxides (LDHs) on cellulose fibre. The LDHs take up significant amount of selenite and selenate in a wide pH range with similar sorption capacities (pH 3.8-8.0 for selenite and pH 5.8-7.0 for selenate). A mini-column packed with Mg-FeCO(3) LDHs layer coated cellulose fibre particles was incorporated into a sequential injection system for uptake of selenite at pH 6.0. The retained selenite was afterwards collected with 70 µ L of 0.8%(m/v) NaOH as eluent, followed by hydride generation and atomic fluorescence spectrometric detection. Total inorganic selenium was adsorbed at pH 6.0 by the LDHs-cellulose fibre mini-column after selenate was pre-reduced to selenite by 2.0 mol L(-1) HCl at 80°C, and selenium speciation was performed by difference. With a sample volume of 1.0 mL, an enrichment factor of 13.3 was derived with a detection limit of 11 ng L(-1) within a linear range of 0.04-4.0 µg L(-1). A relative standard deviation (RSD) of 3.3% (0.5 µg L(-1), n=11) was achieved. The procedure was validated by analyzing selenium in a certified reference material GBW 10010 (rice), and speciation of inorganic selenium in natural water samples.

Functionalization of MWNTs with hyperbranched PEI for highly selective isolation of BSA.

Cationic hyperbranched BPEI was immobilized on the surface of MWNTs via electrostatic interactions between the positively charged protonated amines within the polymer and the carboxyl groups on the chemically oxidized MWNT surface. The functionalized BPEI-MWNTs were characterized by FT-IR, TGA, TEM and surface charge analysis, and it was used as a bio-sorbent for the adsorption of proteins. CD spectra showed no conformational change of BSA during the adsorption/desorption process. A dynamic adsorption capacity of 167 mg · g⁻¹ for BSA was achieved. With a sample volume of 2.0 mL, an enrichment factor of 10 was obtained along with an adsorption efficiency of 100%, a recovery of 100%, a sampling frequency of 10 h⁻¹ and a RSD of 2.6% at 25 µg · mL⁻¹ BSA.

Enzymatic hydrolysis of sodium dodecyl sulphate (SDS)-pretreated newspaper for cellulosic ethanol production by Saccharomyces cerevisiae and Pichia stipitis.

Fermentation of enzymatic hydrolysate of waste newspaper was investigated for cellulosic ethanol production in this study. Various nonionic and ionic surfactants were applied for waste newspaper pretreatment to increase the enzymatic digestibility. The surfactant-pretreated newspaper was enzymatically digested in 0.05 M sodium citrate buffer (pH 4.8) with varying solid content, filter paper unit loading (FPU/g newspaper), and ratio of filter paper unit/beta-glucosidase unit (FPU/CBU). Newspaper pretreated with the anionic surfactant sodium dodecyl sulphate (SDS) demonstrated the highest sugar yield. The addition of Tween-80 in the enzymatic hydrolysis process enhanced the enzymatic digestibility of newspaper pretreated with all of the surfactants. Enzymatic hydrolysis of SDS-pretreated newspaper with 15% solid content, 15 FPU/g newspaper, and FPU/CBU of 1:4 resulted in a newspaper hydrolysate conditioning 29.07 g/L glucose and 4.08 g/L xylose after 72 h of incubation at 50 degrees C. The fermentation of the enzymatic hydrolysate with Saccharomyces cerevisiae, Pichia stipitis, and their co-culture produced 14.29, 13.45, and 14.03 g/L of ethanol, respectively. Their corresponding ethanol yields were 0.43, 0.41, and 0.42 g/g.