Gender difference in hepatic AMPK pathway activated lipid metabolism induced by aged polystyrene microplastics exposure.

Microplastics (MPs) pollution becomes an increasing concern and researchers keep exploring the health effects caused by MPs exposure. The ageing process in the environment significantly alters the physicochemical characteristics of MPs and subsequently affects their toxicities. The health effects of aged MPs exposure and the mechanism underlying are worthy of exploration. Polystyrene microplastics (PS-MPs) (with size less than 50 µm) were obtained by grinding and screening polystyrene materials. PS-MPs continued to be aged by ozone treatment (0.4 mg/min, 9 h). Both male and female C57BL/6 mice were orally exposed to 0 or 2 mg/kg/d aged PS-MPs for 28 days. Results showed that PS-MPs were found in liver, ovary and spleen of females and liver, testis and spleen of males in the aged PS-MPs group. Exposure to aged PS-MPs significantly decreased abdominal fat/body coefficient, the adipocyte size and the serum LDL-C level in females. Compared to the control, serum estradiol (E2) level, the mRNA expression levels of genes regulating E2 production (17ß-hsd, 3ß-hsd and Star) in ovary and the protein expression levels of E2 receptors (ERα, ERß), AMPKα and p-AMPKα1 in liver increased significantly, and the mRNA expression levels of AMP-activated protein kinase (AMPK) downstream genes (Srebp-1c, Fas and Scd1) in liver decreased significantly in the female aged PS-MPs group. Liver metabolomic profiling showed that differential metabolites between female aged PS-MPs group and female control group were enriched in biotin metabolism and the level of biotin increased significantly in the female aged PS-MPs group. However, no significant changes were detected in males. These results indicated that aged PS-MPs exposure increased ovarian E2 production and activated the AMPK pathway in the liver which might inhibit liver lipid synthesis only in females. Our findings provide new insights into the potential sex-specific health effects of environmental MPs pollution.

Effects induced by polyethylene microplastics oral exposure on colon mucin release, inflammation, gut microflora composition and metabolism in mice.

Microplastics are plastic fragments widely distributed in the environment and accumulate in the organisms. However, the research on microplastics effects in mammals is limited. Polyethylene is the main kind of microplastics in the environment. We hypothesized that polyethylene exposure disrupts host intestine metabolism by modifying intestine microflora composition and then lipopolysaccharide (LPS) pathway. Female mice were orally exposed to 0, 0.002 and 0.2 µg/g/d polyethylene microplastics (PE MPs) for 30 days. Colon mucin density was quantized after AB-PAS staining. Mucin 2 (MUC2), inflammatory factors (IL-1ß, IL-6, IL-8 and IL-10), short-chain fatty acid receptors (GPR41 and GPR43), LPS receptors (TLR4 and MyD88) and LPS pathway downstream genes (ERK1 and NF-κB) mRNA levels in colon were measured. Feces were collected on the 15th day of exposure for gut microflora analysis. Blood biochemical analysis was performed. Results showed that 0.2 µg/g/d PE MPs exposure significantly decreased colon mucin expression (p < 0.05), decreased IL-1ß (p < 0.05) and increased IL-8 and IL-10 levels (p < 0.01 and p < 0.001 respectively). Microflora data showed that in 0.2 µg/g/d PE MPs group the number of Firmicutes decreased and the number of Bacteroides increased (both p < 0.01). Predicted KEGG metabolic pathways by piecrust method indicated that PE MPs enhanced amino acids metabolism in microflora. ERK1 and NF-κB mRNA were significantly lower in 0.2 µg/g/d PE MPs group (both p < 0.001). Blood total protein, albumin and globulin levels significantly increased after 0.2 µg/g/d PE MPs exposure (p < 0.01, p < 0.01 and p < 0.05 respectively). These results indicate that PE MPs exposure induced decreased mucin production, a slight immune response and increased the microflora amino acid metabolism in the mice colon by modifying colon microflora composition. SUMMARY: Polyethylene microplastics exposure decreased colon mucin release and increased amino acid metabolism by modifying colon microflora composition.

Direct measurement of radial fluence distribution inside a femtosecond laser filament core.

Modulation and direct measurement of the radial fluence distribution inside a single filament core (especially less than 100 µm in diameter) is crucial to filament-based applications. We report direct measurements of the radial fluence distribution inside a femtosecond laser filament core and its evolution via the filament-induced ablation method. The radial fluence distributions were modulated by manipulating the input pulse diffraction through an iris. Compared with using a traditionally circular iris, a stellate iris substantially suppressed the diffraction effect, and laser fluence, intensity and plasma density inside the filament core were considerably increased. The radial fluence inside filament cores was also quantitatively measured via the filament drilling diaphragms approach. Furthermore, numerical simulations were performed to support the experimental results by solving nonlinear Schrödinger equations. The effects of the tooth size of the stellate iris were numerically investigated, which indicated that bigger tooth favors higher fluence and longer filament. In addition to being beneficial in understanding the filamentation process and its control, the results of this study can also be valuable for filament-based applications.

High-birefringence, low-loss porous fiber for single-mode terahertz-wave guidance.

A new kind of polymer porous fiber with elliptical air-holes is designed for obtaining high birefringence in the terahertz (THz) frequency range in this paper. Using the finite element method, the properties of this kind of fiber are simulated in detail including the single-mode propagation condition, the birefringence, and the loss. Theoretical results indicate that the single-mode THz wave in the frequency range from 0.73 to 1.22 THz can be guided in the fiber; the birefringence can be enhanced by rotating the major axis of the elliptical air-hole and there exists an optimal rotating angle at 30°. At this optimal angle a birefringence as high as 0.0445 can be obtained in a wide frequency range. Low-loss THz guidance can be achieved owing to the effective reduction of the material absorption in such a porous fiber. This research is useful for polarization-maintaining THz-wave guidance.

Embedded 3D printing and pressurized thermo-curing of PMMA for medical implants.

Poly (methyl methacrylate) (PMMA) is a synthetic polymer commonly used for medical implants in cranioplasty and orthopedic surgery owing to its excellent mechanical properties, optical transparency, and minimal inflammatory responses. Recently, the development of 3D printing opens new avenues in the fabrication of patient-specific PMMA implants for personalized medicine. However, challenges are confronted when adapting medical-grade PMMA to the 3D printing process due to its dynamic viscosity and nonself-supporting characteristics before cured. In addition, the intrinsically exothermic polymerization of MMA brings about bubble generation issues that reduce its mechanical performance harshly. Therefore, in this study, an embedded 3D printing methodology followed by pressurized thermo-curing is proposed and developed: a granular alginate microgel is designed for serving as a supporting matrix when jamming formed between the granules to structurally support the extruded precursor filaments of PMMA-MMA ink during both 3D printing and post-curing; moreover, the autoclave reactor enclosing the alginate matrix and as-sculpted PMMA structures is utilized to generate temperature-dependent pressure, which serves for suppressing the bubbles and solidifying the polymerized MMA during the post-curing process. The 3D printed PMMA is comparably matchable to traditional PMMA castings in terms of their microstructures, density, thermal properties, mechanical performance and biocompatibility. In the future, the proposed embedded 3D printing platform combined with the special post-curing method has great potential for a customized and cost-effective fabrication of patient-specific, complex and functional PMMA implants.

Durable underwater super-oleophobic/super-hydrophilic conductive polymer membrane for oil-water separation.

Oily sewage has made serious impact on environment and people's life, and its treatment has become a global problem to be urgently solved. Oil-water separation has been considered to be an effective method to treat oily sewage at present. In this work, an underwater super-oleophobic/super-hydrophilic membrane with oil-water separation and self-cleaning properties was fabricated by electrochemical oxidation of sodium lignosulfonate doped polypyrrole. The membrane showed super-hydrophilicity for water-removal in air and super-hydrophilicity for oil-removal underwater in both oxidation and reduction states. The oil-water separation efficiency of the membranes for different organics exceeded 98.44%, no matter in oxidation or reduction state. Moreover, the membrane still exhibited excellent performance in terms of the oil-water separation efficiency and flux after 70 cycles, which were greater than 97.18% and 70.14 L·m-2·h-1, respectively. Simultaneously, through exploration of the mechanism, it was found that the larger anion kept intact in the membrane during the redox process, which made the stability of composition and performance. Thus, the membrane with advantageous properties, including underwater super-oleophobic/super-hydrophilicity, high oil-water separation efficiency, high circulating rate and stability, has significant potential in separation and collection of oily sewage.

Ultrastrong, Thermally Stable, and Food-Safe Seaweed-Based Structural Material for Tableware.

Widely used disposable plastic tableware is usually buried or directly discharged into the natural environment after using, which poses potential threats to the natural environment and human health. To solve this problem, nondegradable plastic tableware needs to be replaced by tableware composed of biodegradable structural materials with both food safety and the excellent mechanical and thermal properties. Here, a food-safe sargassum cellulose nanofiber (SCNF) is extracted from common seaweed in an efficient and low energy consuming way under mild reaction conditions. Then, by assembling the SCNF into a dense bulk material, a strong sargassum cellulose nanofiber structural material (SCNSM) with high strength (283 MPa) and high thermal stability (>160 °C) can be prepared. The SCNSM also possesses good machinability, which can be processed into tableware with different shapes, e.g., knives and forks. The overall performance of the SCNSM-based tableware is better than commercial plastic, wood-based, and poly(lactic acid) tableware, which shows great application potential in the tableware field.

TPGS-based and S-thanatin functionalized nanorods for overcoming drug resistance in Klebsiella pneumonia.

Tigecycline is regarded as the last line of defense to combat multidrug-resistant Klebsiella pneumoniae. However, increasing utilization has led to rising drug resistance and treatment failure. Here, we design a D-alpha tocopheryl polyethylene glycol succinate-modified and S-thanatin peptide-functionalized nanorods based on calcium phosphate nanoparticles for tigecycline delivery and pneumonia therapy caused by tigecycline-resistant Klebsiella pneumoniae. After incubation with bacteria, the fabricated nanorods can enhance tigecycline accumulation in bacteria via the inhibitory effect on efflux pumps exerted by D-alpha tocopheryl polyethylene glycol succinate and the targeting capacity of S-thanatin to bacteria. The synergistic antibacterial capacity between S-thanatin and tigecycline further enhances the antibacterial activity of nanorods, thus overcoming the tigecycline resistance of Klebsiella pneumoniae. After intravenous injection, nanorods significantly reduces the counts of white blood cells and neutrophils, decreases bacterial colonies, and ameliorates neutrophil infiltration events, thereby largely increasing the survival rate of mice with pneumonia. These findings may provide a therapeutic strategy for infections caused by drug-resistant bacteria.

Role of ranulas in early diagnosis of Sjögren's syndrome: A case report.

BACKGROUND: Although the presentations of Sjögren's syndrome (SS) are variable, ranging from mild dryness to wider systemic involvement, ranulas as early clinical signs were scarcely reported. Here, we present an adult patient with SS, who developed a unilateral simple ranula and was diagnosed primary SS 3 years later. We also provide a review of cases of SS and ranulas from 1980 to 2020. CASE SUMMARY: A 22-year-old girl was found to have a left painless floor-of-mouth lesion 3 years ago, without obvious trauma or inducement. The diagnosis of a unilateral (left) simple ranula was made, and the ranula was surgically treated. Within 3 years after the ranula surgery, she developed acute lymphadenectasis in unilateral parotid twice without inducement, and ultrasonic examination revealed diffuse lesions in bilateral parotids and submandibular glands, which strongly suggested SS. Serologic tests and the unstimulated whole saliva flow rate confirmed the SS diagnosis. CONCLUSION: Our study underlines that ranulas are early clinical signs of SS. As early diagnosis and early intervention of SS are important to obtain better outcomes, our findings underline the need for histopathological test after sublingual adenectomy and imaging detection of exocrine glands for the patients with ranulas.

Two Novel Myelin Protein Zero Mutations in a Group of Chinese Patients.

Mutations in the myelin protein zero gene are responsible for the autosomal dominant Charcot-Marie-Tooth disease (CMT). We summarized the genetic and clinical features of six unrelated Chinese families and the genetic spectrum of Chinese patients with myelin protein zero (MPZ) mutations. Our study reports data from a group of Chinese patients consisting of five males and one female with the age of disease onset ranging from 16 to 55 years. The initial symptom in all the patients was the weakness of the lower limbs. Electrophysiological presentations suggested chronic progressive sensorimotor demyelinating polyneuropathy. Overall six mutations were identified in the cohort, including four known mutations [c.103G>T (p.D35Y), c.233C>T (p.S78L), c.293G>A (p.R98H), and c.449-1G>T], and two novel mutations [c.67+4A>G with a mild CMT1B phenotype, and (c.79delG) p.A27fs with a rapidly progressive CMT1B phenotype]. According to the literature review, there are 35 Chinese families with 28 different MPZ mutations. The MPZ mutational spectrum in Chinese patients is very heterogeneous and differs from that of Japanese and Korean individuals, although they do share several common hot spot mutations.

Ensiling characteristics, physicochemical structure and enzymatic hydrolysis of steam-exploded hippophae: Effects of calcium oxide, cellulase and Tween.

To find a comprehensive way to enhance the utilizability of steam-exploded hippophae, calcium oxide (CaO) preimpregnation, cellulase-added storage and saccharification with addition of Tween 20 were investigated in this study. Both CaO preimpregnation and cellulase addition promoted the ensiling fermentation of anaerobically stored steam-exploded hippophae indicated by lower cellulose proportion and higher organic acids content, but led to the decrease of saccharification yield by 11.83% and 46.77-51.22%, respectively. When taking into account of organic acids being utilizable energy source, storing with addition of cellulase enhanced the utilizability of the materials in whole. Moreover, the addition of Tween 20 enhanced saccharification yield of the steam-exploded hippophae by 26.69-45.25%. Additionally, FTIR and XRD spectra clearly illustrated the structural alteration during storage. It is concluded that storing with addition of cellulase and hydrolyzing with addition of Tween 20 can enhance the utilizability of steam-exploded hippophae.

A novel homozygous NDRG1 mutation in a Chinese patient with Charcot-Marie-Tooth disease 4D.

Charcot-Marie-Tooth disease 4D (CMT4D) is characterized by severe peripheral neuropathy and deafness. It is caused by mutations in the N-myc downstream-regulated gene 1 (NDRG1). We report a Chinese man with a homozygous mutation c.675C > T of NDRG1 that resulted in Q185X, representing the third known CMT4D patient of non-European ancestry. The patient presented with a 15-year-long history of progressive limb weakness accompanied by hearing loss and dysarthria. There was abnormal differentiation and increased interpeak latencies in brainstem auditory evoked potentials. Compound muscle action potentials (CMAP) of the peripheral nerves were not elicited in distal segments, while prolonged distal latencies and decreased CMAP were present in proximal nerves. A mild enlargement of the lateral ventricles showed in brain magnetic resonance imaging studies. Q185X of NDRG1 is a novel mutation with CMT4D, which are demonstrated in Asian population. Q185X of the NDRG1 expands the clinical and mutational spectrum of CMT4D.

Metal-organic framework-based molecularly imprinted polymer as a high sensitive and selective hybrid for the determination of dopamine in injections and human serum samples.

A highly sensitive and selective molecular imprinting polymer (MIP) sensor was fabricated based on polypyrrole (PPy)/ZIF-67/Nafion hybrid modified glassy carbon electrode (GCE) for the determination of dopamine (DA). The ZIF-67 material was facilely prepared by using hydrothermal synthesis method; subsequently, the PPy/ZIF-67/Nafion hybrid was obtained through a one-pot synthesis method. The physical properties of the materials and the modified sensors were investigated by using X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Nitrogen adsorption-desorption isothermal (BET), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM) and Atomic force microspectroscopy (AFM) apparatus. Cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscope (EIS) were used to evaluate the electrochemical performance of the sensors. The influence factors controlling the performance of the MIP sensor were studied and included scan rate, pH value and scan cycles. Under optimal conditions, DPV peak was linearly related to DA concentration over two concentration intervals (0.08-100 µM and 100-500 µM). The detection limit of PPy/ZIF-67-MIPs/Nafion/GCE sensor for DA was 0.0308 µM (S/N = 3) and sensitivity was equal to 1.656 µA µM cm-2. Furthermore, good reproducibility, long-term stability and favorable selectivity were obtained in the experiment. Moreover, the fabricated MIP sensor was successfully applied in the determination of DA concentrations in injection and human serum samples with satisfactory recoveries.

Plant Species Rather Than Climate Greatly Alters the Temporal Pattern of Litter Chemical Composition During Long-Term Decomposition.

A feedback between decomposition and litter chemical composition occurs with decomposition altering composition that in turn influences the decomposition rate. Elucidating the temporal pattern of chemical composition is vital to understand this feedback, but the effects of plant species and climate on chemical changes remain poorly understood, especially over multiple years. In a 10-year decomposition experiment with litter of four species (Acer saccharum, Drypetes glauca, Pinus resinosa, and Thuja plicata) from four sites that range from the arctic to tropics, we determined the abundance of 11 litter chemical constituents that were grouped into waxes, carbohydrates, lignin/tannins, and proteins/peptides using advanced (13)C solid-state NMR techniques. Decomposition generally led to an enrichment of waxes and a depletion of carbohydrates, whereas the changes of other chemical constituents were inconsistent. Inconsistent convergence in chemical compositions during decomposition was observed among different litter species across a range of site conditions, whereas one litter species converged under different climate conditions. Our data clearly demonstrate that plant species rather than climate greatly alters the temporal pattern of litter chemical composition, suggesting the decomposition-chemistry feedback varies among different plant species.

Chirality sensing using Ag⁺-thiol coordination polymers.

We report here chirality sensing using achiral Ag(+)-thiol coordination polymers as the framework which becomes CD active upon interaction with chiral species, taking p-mercaptophenylboronic acid as a thiol ligand that bears a binding group for monosaccharides.

Facile Construction of Near Infrared Fluorescence Nanoprobe with Amphiphilic Protein-Polymer Bioconjugate for Targeted Cell Imaging.

A simple, straightforward, and reproducible strategy for the construction of a near-infrared (NIR) fluorescence nanoprobe was developed by coating CuInS2/ZnS quantum dots (CIS/ZnS QDs) with a novel amphiphilic bioconjugate. The amphiphilic bioconjugate with a tailor-designed structure of bovine serum albumin (BSA) as the hydrophilic segment and poly(ε-caprolactone) (PCL) as the hydrophobic part was fabricated by chemical coupling the hydrophobic polymer chain to BSA via the maleimide-sulfhydryl reaction. By incorporating CIS/ZnS QDs into the hydrophobic cores of the self-assembly of BSA-PCL conjugate, the constructed NIR fluorescence nanoprobe exhibited excellent fluorescent properties over a wide pH range (pH 3-10) and a good colloidal stability in PBS buffer (pH = 7.4) with or without 10% fetal bovine serum. The presence of the outer BSA shell effectively reduced the nonspecific cellular binding and imparted high biocompatibility and low-toxicity to the probe. Moreover, the NIR fluorescence nanoprobe could be functionalized by conjugating cyclic Arg-Gly-Asp (cRGD) peptide, and the decorated nanoprobe was shown to be highly selective for targeted integrin αvß3-overexpressed tumor cell imaging. The feasibility of the constructed NIR fluorescence probe in vivo application was further investigated and the results demonstrated its great potential for in vivo imaging. This developed protocol for phase transfer of the CIS/ZnS QDs was universal and applicable to other nanoparticles stabilized with hydrophobic ligands.

Facile Synthesis of Gd-Cu-In-S/ZnS Bimodal Quantum Dots with Optimized Properties for Tumor Targeted Fluorescence/MR In Vivo Imaging.

Dual-modal imaging techniques have gained intense attention for their potential role in the dawning era of tumor early accurate diagnosis. Chelate-free robust dual-modal imaging nanoprobes with high efficiency and low toxicity are of essential importance for tumor targeted dual-modal in vivo imaging. It is still a crucial issue to endow Cd-free dual-modal nanoprobes with bright fluorescence as well as high relaxivity. Herein, a facile synthetic strategy was developed to prepare Gd-doped CuInS/ZnS bimodal quantum dots (GCIS/ZnS, BQDs) with optimized properties. The fluorescent properties of the GCIS/ZnS BQDs can be thoroughly optimized by varying reaction temperature, aging time, and ZnS coating. The amount of Gd precursor can be well-controlled to realize the optimized balance between the MR relaxivity and optical properties. The obtained hydrophobic GCIS/ZnS BQDs were surface engineered into aqueous phase with PEGylated dextran-stearyl acid polymeric lipid vesicles (PEG-DS PLVs). Upon the phase transfer, the hydrophilic GCIS/ZnS@PLVs exhibited pronounced near-infrared fluorescence as well as high longitudinal relaxivity (r1 = 9.45 mM(-1) S(-1)) in water with good colloidal stability. In vivo tumor-bearing animal experiments further verified GCIS/ZnS@PLVs could achieve tumor-targeted MR/fluorescence dual-modal imaging. No toxicity was observed in the in vivo and ex vivo experiments. The GCIS/ZnS@PLVs present great potential as bimodal imaging contrast agents for tumor diagnosis.

Preparation of photosensitizer-loaded PLLA nanofibers and its anti-tumor effect for photodynamic therapy in vitro.

Photodynamic therapy (PDT) is a promising new treatment for cancer that has been recently accepted clinically. PDT is based on the administration of tumor-localizing photosensitizers (PSs), followed by exposing the neoplastic area to the light absorbed by the PS. In this article, a novel anticancer nanofiber membrane containing purpurin-18 (0.1%) was successfully prepared. The thickness of membrane was 0.028 mm, and the average fiber diameter was around 357 nm by scanning electron microscope (SEM). It was indicated that purpurin-18 possessed excellent compatibility with PLLA from FTIR spectrum. The physical properties of fiber membrane were also characterized by Differential Scanning Calorimetry (DSC) and X-ray diffraction (XRD). Cell morphology and the interaction between cells and nanofibers were studied by SEM. The results showed that both SMMC 7721 and ECA109 cells can adhere and spread on the surface of the polymer nanofiber, and both cells can interact and integrate well with the surrounding fibers. The efficacy of PDT was determined by MTT assays. The results showed that the cells were killed immediately after PDT and purpurin-18 had no different efficacy to different cancer cell lines. In summary, the PS-loaded PLLA nanofibers were prepared successfully, and the SMMC 7721 and ECA109 cells could be inhibited and killed through photodynamic therapy.

Synthesis of Zn-Cu-In-S/ZnS core/shell quantum dots with inhibited blue-shift photoluminescence and applications for tumor targeted bioimaging.

A facile strategy is reported here for synthesis of Zn-Cu-In-S/ZnS (ZCIS/ZnS) core/shell QDs to address the synthetic issues that the unexpected blue-shift of CuInS(2)-based nanocrystals. In this strategy, Zn(2+) ions are intentionally employed for the synthesis of alloyed ZCIS core QDs before ZnS shell coating, which contributes to the reduced blue-shift in photoluminescence (PL) emission. The experimental results demonstrate this elaborate facile strategy is effective for the reduction of blue-shift during shell growth. Particularly, a hypothesis is proposed and proved for explanation of this effective strategy. Namely, both cation exchange inhibition and ions accumulation are involved during the synthesis of ZCIS/ZnS QDs. Furthermore, the obtained near infrared (NIR) ZCIS/ZnS QDs are transferred into aqueous phase by a polymer coating technique and coupled with cyclic Arg-Gly-Asp peptide (cRGD) peptides. After confirmation of biocompability by cytotoxicity test on normal 3T3 cells, these QDs are injected via tail vein into nude mice bearing U87 MG tumor. The result indicates that the signals detected in the tumor region are much more distinguishing injected with ZCIS/ZnS-cRGD QDs than that injected with ZCIS/ZnS QDs.

A ratiometric luminescent sensing of Ag+ ion via in situ formation of coordination polymers.

A ratiometric luminescent sensing of Ag(+) ion is developed via the Ag(I)-NCys coordination polymeric luminophore in situ formed in aqueous solution upon mixing Ag(+) ion with the designed fluorescent thiol ligand NCys.