Two-thirds anteroposterior ramus length is the preferred osteotomy point for intraoral vertical ramus osteotomy.

OBJECTIVES: This study aimed to investigate the mandibular canal of ramus and design a suitable osteotomy line for intraoral vertical ramus osteotomy (IVRO) using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Ninety patients were classified into class I, II, and III skeletal pattern groups. When extended from the horizontal base plane (0 mm, mandibular foramen [MF]), with a 2-mm section interval, to 10 mm above and 10 mm below the MF, the following landmarks were identified: external oblique ridge (EOR), posterior border of the ramus (PBR), and posterior lateral cortex of ramus (PLC): IVRO osteotomy point. RESULTS: In the base plane (0-mm plane), the EOR-PBR distance of class III (34.78 mm) and the IOR-PBR distance of class II (32.72 mm) were significantly higher than those of class I (32.95 mm and 30.03 mm). Compared to the EOR-PLC distance, the designed osteotomy point (two-thirds EOR-PBR length) has a 3.49-mm safe zone at the base plane and ranging from 0.89 mm (+ 10-mm plane) to 8.37 mm (- 10-mm plane). CONCLUSIONS: The position at two-thirds EOR-PBR length (anteroposterior diameter of the ramus) can serve as a reference distance for the IVRO osteotomy position. CLINICAL RELEVANCE: Mandibular setback operations for treating mandibular prognathism mainly include sagittal split ramus osteotomy (SSRO) and IVRO. IVRO has a markedly lower incidence of postoperative lower lip paraesthesia than SSRO. Our design presented a reference point for identification during IVRO, to prevent damage to the inferior alveolar neurovascular bundle.

Cone beam computed tomographic analysis of the spatial limitation during mandibular arch distalization.

BACKGROUND: In the literature, attempts are seldom made to quantify spatial limitation during mandibular arch distalization. This study aimed to investigate the spatial limitations associated with cortical contact with the mandibular second molar during mandibular arch distalization. METHODS: The study population included 67 individuals who had undergone cone beam computed tomography (CBCT) (34 male and 33 female; mean age: 23.9 ± 2.72 years). The total ridge width, alveolar housing width, and root width were measured to evaluate the buccolingual limit. The space distal to the molar root represented the mesiodistal limit. The influence of sex, right versus left side, root-contact condition, malocclusion category, and presence of wisdom teeth were evaluated. RESULTS: The rate of cortical contact was 49.3% before any orthodontic movement. No significant differences were observed in the alveolar width according to sex (male vs female), side assessed (right vs left), wisdom teeth (present vs absent), or malocclusion category. The ridge width and the alveolar width were smaller in the contact group than in the non-contact group (P < 0.01). The group with wisdom teeth showed a larger available distalization distance, but a significant difference was observed only near the alveolar crest. CONCLUSIONS: Both ridge width and available distalization distance were limiting factors for mandibular teeth distalization. For cases in which whole-arch distalization is planned, CBCT is recommended before treatment, especially for non-extraction treatment. This approach ensures safe and predictable tooth movement.

Professional oral care in end-of-life patients with advanced cancers in a hospice ward: improvement of oral conditions.

BACKGROUND: In end-of-life patients with advanced cancers, oral examination, oral care, and oral re-examination are crucial. Although oral symptoms are among the major complaints of end-of-life patients, few studies have focused on oral care in these patients. In this study, the association between oral symptoms and oral dryness among end-of-life patients was examined, and improvement of oral conditions after oral care interventions by a professional dentist was quantified. METHODS: This prospective intervention study included 27 terminally ill patients with advanced cancers in a hospice ward. Professional oral care was administered every morning, and the improvement of oral conditions was assessed by comparing oral conditions before and after the intervention. Oral assessment was performed using the Oral Health Assessment Tool (OHAT) and Oral Assessment Guide. Oral dryness was evaluated through Clinical Diagnosis Classification of oral dryness and an oral moisture device. Oral cleanliness was evaluated using a bacterial counter, and tongue smears were collected for Candida examination; furthermore, oral function was recorded. RESULTS: The presence of oral mucositis was closely associated with severe oral dryness (odds ratio [OR] = 14.93; 95% confidence interval [CI]: 1.95-114.38). The level of oral debris retention was significantly related to the degree of oral dryness (OR = 15.97; 95% CI: 2.06-123.72). The group with higher scores (OHAT > 8), which represent poor oral conditions, showed severe oral dryness (OR = 17.97; 95% CI: 1.45-223.46). Total OHAT scores (median: 7 vs 2) and those of other subgroups (lip, tongue, gums and tissues, saliva, and oral cleanliness showed a significant decrease after the intervention. Furthermore, the occurrence of mucositis (47.1% vs 0%), candidiasis rate (68.8% vs 43.8%), oral dryness self-sensation (63.6% vs 9.1%), and severe oral debris (52.9% vs 11.8%) decreased significantly. CONCLUSIONS: Proper oral care can improve oral health and hygiene, reduce the rate of mucositis, reduce the sensation of oral dryness, increase oral moisture, and reduce the chances of oral infections among end-of-life patients. Daily oral care is necessary and can alleviate oral discomfort, increase food intake, and increase the chances of communication between end-of-life patients and their families.

Recognizing the peak bone mass (age 30) as a cutoff point to achieve the success of orthodontic implants.

The aim of present study was to investigate the critical risk factor (age 30: peak bone mass) to evaluate the success of orthodontic implants. A total of 426 orthodontic implants were placed in 270 patients as orthodontic anchorages. Data were analyzed according to patient's characteristics, location of placement, implant categories, and orthodontic force. The young patients were the age ≤ 30 years and the older patients were the age > 30 years. Statistical analysis was performed and a p value < 0.05 was considered to indicate statistical significance. The Chi-square or Fisher exact test was used depending on sample sizes. The null hypothesis was no statistically significant correlation between age ≤ 30 years and age > 30 years. The overall success rate (with and without predrill) was 89.2%. The success rate of orthodontic implants was significantly larger in younger patients (89.9%) than in older patients (76.1%). Recognizing age-related factor in the success rates, older patient (> 30 years) were significant lower than young patients (≤ 30 years) in the gender (female and male), malocclusion (Class II), facial pattern (ortho and hyperdivergent), location (infrazygomatic crest), jaw (maxilla), side (right), material (titanium and stainless), length (9 mm and 10 mm), diameter (2 mm), load (< 3 weeks), and force (intrusion). Therefore, the null hypothesis was rejected. Age 30 is a cutoff point to achieve the success of orthodontic implants. The success rates of older patients (age > 30 years) were significant lower than young patients (age ≤ 30 years), especially in female.

Influence of cavity depth and restoration of non-carious cervical root lesions on strain distribution from various loading sites.

BACKGROUND: We aimed to investigate the load-induced strain variation in teeth with unrestored and resin-based composite restored non-carious cervical lesions (NCCLs). METHODS: Twelve extracted premolars were provided for measuring buccal-side root NCCLs. Strain gauges were fixed at four measuring sites of each tooth, two at the buccal surface and two at the lingual surface. NCCLs were prepared with occlusal margins at the cemento-enamel junction. A static 9-kg load was applied at seven occlusal loading points: buccal cusp tip (BC), inner inclination of the BC, lingual cusp tip (LC), inner inclination of the LC, center of the mesial marginal ridge or distal marginal ridge, and center of the central groove. The strain was detected at each site in teeth with NCCL depths of 0 (control), 0.5, 1.0, and 1.5 mm. Each NCCL was restored using an adhesive composite resin, and the strains were re-measured. RESULTS: The strains at the NCCL occlusal and gingival margins decreased with increasing defect depths, and the effect was significant when the depth of the defect was 1.5 mm. Loading on the buccal and lingual cusps induced prominent strain variation. The strains at all depth distribution recovered to nearly intact conditions when the NCCLs were restored. CONCLUSIONS: NCCLs at 1.5 mm depth are detrimental, but they can be restored using resin composites. CLINICAL SIGNIFICANCE: The existence of NCCLs should not be ignored. The depth of the NCCL may affect the progression of the lesion. Resin composite restoration is an appropriate method for preventing persistent NCCL deterioration.

The effect of low-level laser irradiation on hyperglycemia-induced inflammation in human gingival fibroblasts.

Hyperglycemia-induced inflammation can greatly increase the risk of periodontal disease in people with diabetes. Low-level laser irradiation (LLLI) has been used for wound healing and anti-inflammation in many cases, and LLLI is known to inhibit the lipopolysaccharide (LPS)-stimulated inflammatory response. However, the therapeutic effect of LLLI in diabetes patients with periodontitis remains unknown. In this study, we cultured human gingival fibroblasts (HGFs) in high-glucose medium (35 mM) to mimic a hyperglycemic environment, and then measured the anti-inflammatory effect of LLLI by assessing the expression of pro-inflammatory genes including tumor necrosis factor-α (TNF-α), interleukin (IL)-1ß, IL-6, and IL-8 by quantitative real-time polymerase chain reaction. The results demonstrated no significant inflammatory response in HGFs cultured in mannitol medium and in those treated only with LLLI. However, HGFs cultured only in high-glucose medium showed significantly higher expression of pro-inflammatory cytokine than in those treated together with LLLI. We then observed that LLLI reduced the expression of pro-inflammatory cytokines in HGFs cultured in high-glucose medium by modulating cAMP signaling. We also investigated whether antioxidant (vitamin C) treatment reduced the inflammatory effect of oxidative stress in HGFs cultured in high-glucose medium but found no additive effect upon co-treatment with LLLI, suggesting that LLLI may activate cAMP signaling, but not reactive oxygen species (ROS) signaling, to reduce the high glucose-induced inflammation. In conclusion, LLLI may have an anti-inflammatory effect on HGFs in a high glucose environment and may benefit the treatment of periodontal disease in diabetes patients.

Anti-inflammatory effects of low-level laser therapy on human periodontal ligament cells: in vitro study.

Periodontal disease is a chronic inflammatory disease that is commonly treated with surgical and nonsurgical techniques. However, both approaches have limitations. Low-level laser therapy (LLLT) has been widely applied in reducing inflammatory reactions, and research indicates that LLLT induces an anti-inflammatory effect that may enhance periodontal disease therapy. The purpose of this study was to investigate the anti-inflammatory effect of LLLT on human periodontal ligament cells (hPDLCs) in an inflammatory environment and aimed to determine the possible mechanism of action. Cells were cultured and treated with or without lipopolysaccharide (LPS) from Porphryromonas gingivalis or Escherichia coli, followed by irradiation with a gallium-aluminum-arsenide (GaAlAs) laser (660 nm) at an energy density of 8 J/cm2. Quantitative real-time polymerase chain reactions were used to assess the expression of pro-inflammatory genes, including tumor necrosis factor-α (TNF-α), interleukin (IL)-1ß, IL-6, and IL-8. The dual-luciferase reporter assay was used to examine nuclear factor-κB (NF-κB) transcriptional activity. An enzyme-linked immunosorbent assay was used to monitor the concentration of intracellular cyclic adenosine monophosphate (cAMP). Both LPS treatments significantly induced the mRNA expression of pro-inflammatory cytokines. However, LLLT inhibited the LPS-induced pro-inflammatory cytokine expression and elevated intracellular levels of cAMP. The LLLT inhibitory effect may function by downregulating NF-κB transcriptional activity and by increasing the intracellular levels of cAMP. LLLT might inhibit LPS-induced inflammation in hPDLCs through cAMP/NF-κB regulation. These results should be further studied to improve periodontal therapy.

Retrospective analysis of nonendodontic periapical lesions misdiagnosed as endodontic apical periodontitis lesions in a population of Taiwanese patients.

OBJECTIVE: We aimed to evaluate nonendodontic periapical lesions clinically misdiagnosed as endodontic periapical pathoses in a population of Taiwanese patients. MATERIALS AND METHODS: Cases (2000-2014) of histopathological diagnoses of nonendodontic periapical lesions were retrieved from all cases with a clinical diagnosis of radicular cyst, apical granuloma, or apical periodontitis in the institution. These cases were regarded as misdiagnosed nonendodontic periapical lesions, of which the types and frequencies, in addition to the demographic data, were determined. RESULTS: Four thousand and four specimens were clinically diagnosed as endodontically associated pathoses, of which 118 cases (2.95%) received a histopathological diagnosis of a nonendodontic pathologic entity, the most frequent lesion being keratocystic odontogenic tumor (KCOT, n = 38, 32.20%), followed by fibro-osseous lesion (n = 18, 15.25%), and dentigerous cyst (n = 13, 11.02%). Nine malignant lesions in the periapical area [squamous cell carcinoma (n = 7, 5.93%), adenoid cystic carcinoma (n = 1, 0.85%), and Langerhans cell histiocytosis (n = 1, 0.85%)] were also noted. CONCLUSIONS: A wide variety of histopathological diagnoses, including benign odontogenic and non-odontogenic cystic and tumorous lesions and infectious diseases, as well as malignant lesions, was noted in these 118 cases of nonendodontic periapical lesions. Squamous cell carcinoma was the most predominant malignancy of nonendodontic periapical lesions misdiagnosed as apical periodontitis lesions from imaging examination overlooking the clinical findings. CLINICAL RELEVANCE: The current data form a useful basis for clinicopathological investigation and educational teaching regarding nonendodontic periapical lesions misdiagnosed as endodontic apical periodontitis lesions.

Expression of a splice variant of CYP26B1 in betel quid-related oral cancer.

Betel quid (BQ) is a psychostimulant, an addictive substance, and a group 1 carcinogen that exhibits the potential to induce adverse health effects. Approximately, 600 million users chew a variety of BQ. Areca nut (AN) is a necessary ingredient in BQ products. Arecoline is the primary alkaloid in the AN and can be metabolized through the cytochrome P450 (CYP) superfamily by inducing reactive oxygen species (ROS) production. Full-length CYP26B1 is related to the development of oral pharyngeal cancers. We investigated whether a splice variant of CYP26B1 is associated with the occurrence of ROS related oral and pharyngeal cancer. Cytotoxicity assays were used to measure the effects of arecoline on cell viability in a dose-dependent manner. In vitro and in vivo studies were conducted to evaluate the expression of the CYP26B1 splice variant. The CYP26B1 splice variant exhibited lower expression than did full-length CYP26B1 in the human gingival fibroblast-1 and Ca9-22 cell models. Increased expression of the CYP26B1 splice variant was observed in human oral cancer tissue compared with adjacent normal tissue, and increased expression was observed in patients at a late tumor stage. Our results suggested that the CYP26B1 splice variant is associated with the occurrence of BQ-related oral cancer.

Water temperature for fabrication of autopolymerizing polymethyl methacrylate (PMMA) interim fixed restoration affects cytotoxicity and residual methyl methacrylate (MMA).

Background/purpose: Clinically, dentists are suggested to immerse autopolymerizing interim fixed restorations in hot water during fabrication. However, this suggestion, without including the best temperature, mostly comes from clinical experience instead of scientific evidence. This in vitro study evaluated the effect of water temperature on the cytotoxicity of interim partial fixed dental prostheses (FDPs) and examined its correlation with residual MMA. Materials and methods: Tempron was chosen as the autopolymerizing polymethyl methacrylate material. Tempron was mixed and then soaked in water at different temperatures, except control group (Controlair) was not being soaking in water. The specimens were incubated with conditioned medium. The concentration of residual MMA was determined by liquid chromatography-tandem mass spectrometry (LC-MS-MS). The cell viability of human gingival fibroblasts (HGFs) was evaluated by MTT assay. Results: The 60 °C and 80 °C groups exhibited significantly higher cell viabilities than those of the other groups (P < 0.05) at 48 and 72 h. The concentration of residual MMA was highly correlated with this outcome: the higher the concentration of residual MMA detected in the eluates, the poorer the cell viability was; the longer the incubation time was, the stronger the correlation was between the concentration of residual MMA and the cell viability. Conclusion: Autopolymerizing PMMA interim FDPs that are polymerized in water up to at least 60 °C could reduce cell toxicity. Higher water temperature could certainly decrease the amount of residual MMA, which is closely correlated with the outcome of cell viability.

Use of customized 3-dimensional printed mandibular prostheses with a dental implant pressure-reducing device in mandibular body defect: A finite element study performing multiresponse surface methodology.

Background/purpose: Segmental body defects of the mandible result in the complete loss of the affected region. In our previous study, we investigated the clinical applicability of a customized mandible prosthesis (CMP) with a pressure-reducing device (PRD) in an animal study. In this study, we further incorporated dental implants into the CMP and explored the use of dental implant PRD (iPRD) designs. Materials and methods: By employing a finite element analysis approach, we created 4 types of CMP: CMP, CMP with iPRD, CMP-PRD, and CMP-PRD with iPRD. We developed 2 parameters for the iPRD: cone length (CL) in the upper part and spring pitch (SP) in the lower part. Using the response surface methodology (RSM), we determined the most suitable structural assignment for the iPRD. Results: Our results indicate that CMP-PRD had the highest von Mises stress value for the entire assembly (1076.26 MPa). For retentive screws and abutments, CMP with iPRD had the highest von Mises stress value (319.97 and 452.78 MPa, respectively). CMP-PRD had the highest principal stress (131.66 MPa) in the anterior mandible. The iPRD reduced principal stress in both the anterior and posterior mandible. Using the RSM, we generated 25 groups for comparison to achieve the most favorable results for the iPRD and we might suggest the CL to 12 mm and the SP to 0.4 mm in the further clinical trials. Conclusion: Use of the PRD and iPRD in CMP may resolve the challenges associated with CMP, thereby promoting its usage in clinical practice.

Trueness of intraoral scanning for different tooth-size arch-length deficiencies.

Background/purpose: As science and technology continue to advance, the utilization of intraoral scanners (IOSs) has become increasingly popular in the orthodontic workflow. The aim of this study was to discuss whether the degree of crowded arches affects scan accuracy. Materials and methods: Three different crowding levels of dental models (model MI: mild, model MO: moderate, and model SE: severe) were scanned using both an IOS and desktop scanner. Stereolithographic files were obtained and superimposed via CAD software to calculate differences between each measuring point of a model and the farthest corresponding point. The deviations from three models were compared with statistical analysis. Results: The trueness of different crowding arches showed that the deviation value of model SE was the maximum, followed by model MI, and model MO in the maxillary arch. In the mandibular arch, the order of the deviation from greatest to least was firstly model SE, then model MO, and model MI. Significant differences were observed among the maxillary models (P < 0.001), but there was no significant difference between models in the mandible (P = 0.669). Conclusion: The trueness of the three crowded arches is in the clinically acceptable range. The degree of crowding increases, the trueness of scanning at each position decreases. In the maxillary arch, more severe crowding corresponds to higher deviations. In the mandible, the degree of crowding is not explicitly related to the maximum deviation; therefore, the clinician should notice the deviation when using IOSs for crowding cases.

The use of customized 3D-printed mandibular prostheses with pressure-reducing device: A clinical trial.

BACKGROUND: Segmental bone defects of the mandible result in the complete loss of the affected region. We had incorporated the pressure-reducing device (PRD) designs into the customized mandible prostheses (CMP) and conducted a clinical trial to evaluate this approach. METHODS: Seven patients were enrolled in this study. We examined the association among the history of radiotherapy, the number of CMP regions, the number of chin regions involved, and CMP exposure. RESULTS: We included five men and two women with an average age of 55 years. We excised tumors with an average weight of 147.8 g and the average weight of the CMP was 68.5 g. No significant difference between the two weights was noted (p = 0.3882). Three patients received temporary dentures and the CMP remained stable in all patients. CONCLUSION: The use of PRD in CMP may address the previous challenges associated with CMP, but further research is necessary.

Black hairy tongue treated with traditional Chinese medicine: A case report.

RATIONALE: Black hairy tongue (BHT) is a rare condition that is conventionally managed by discontinuing associated medications or habits and practicing good oral hygiene, including tongue brushing. Previous studies have indicated that black tongue coating is often associated with gastrointestinal discomfort, which traditional Chinese medicine (TCM) could be a potentially effective option for treating this condition with minimal side effects. We present a case of BHT diagnosed and treated within 2 weeks by using TCM methods. PATIENT CONCERNS: A 73-year-old woman presented with a chief concern of a black tongue that had persisted for 2 weeks and was accompanied by thirst and diarrhea. These symptoms were initially observed during her hospitalization for the treatment of staghorn calculi, xanthogranulomatous pyelonephritis, and urosepsis. Using the "four diagnostic methods" of TCM, we observed that her tongue had a thick black coating surrounded by a thick white coating; her tongue was of medium size with tooth marks, and its body color was light red. DIAGNOSES, INTERVENTIONS, AND OUTCOMES: On the basis of TCM theory, we made a clinical diagnosis of BHT and "spleen Qi deficiency with turbid dampness," which may have been caused by the antibiotic treatment during hospitalization. Subsequently, we administered a Chinese herbal medicine (CHM) formula comprising a combination of Wu-Ling-San () and a modification of Da-Yuan-Yin (). After 2 weeks of CHM treatment, the patient's BHT was nearly eliminated, and the thick white coating and the corresponding symptoms were ameliorated. After 4 weeks of CHM treatment, the BHT was completely resolved. LESSON AND CONCLUSION: We present a case of BHT, a benign condition that may be caused by antibiotics. The literature does not contain reports on TCM-based diagnosis and treatment strategies for BHT. Using the 4 diagnostic methods of TCM, we observed that BHT was associated with gastrointestinal symptoms, which is consistent with the TCM theory. Moreover, CHM treatment rapidly relieved BHT and related symptoms without adverse events.

Efficacy assessment of laser Doppler imager in diagnosing the pulp vitality after dental trauma.

Background/purpose: This is the first paper evaluating the efficacy of laser Doppler imager in diagnosis of pulpal vitality. The purpose of this study was to evaluate and compare the diagnostic benefits of laser Doppler imaging and electric pulp test (EPT) in dental trauma. Materials and methods: Seven patients were selected for pulp vitality evaluation in Kaohsiung Medical University Hospital between 2018 and 2019. EPT and laser Doppler imager evaluation were performed for patients with traumatic injury to teeth. Statistical methods included the Kappa consistency test and the chi-square test. In addition, the receiver operating characteristic (ROC) curve, and the area under the curve (AUC) were used. Results: There was a significant difference in Doppler flow values between the severe trauma group and the mild trauma group, regardless of patient self-reported symptoms (P = 0.043) or physicians' diagnostic classification (P = 0.018). For an EPT instrument, the Kappa coefficient was 0.67 and 1-year pulpal status findings were highly consistent (P < 0.001). Using a Doppler instrument, the Kappa coefficient was 0.85. According to the ROC curve, the AUC for EPT was 0.94, the AUC for Doppler was 1, and the optimal cut-off value was 31.55, indicating that both were superior diagnostic tools. Conclusion: Both laser Doppler imager and EPT can be used as tools for diagnosing traumatic pulp necrosis. Doppler imaging instruments allow for a more timely and accurate assessment of pulp vitality in dental trauma. In the future, ongoing research and related training are necessary for interpretation of Doppler data.

Contact fracture test of monolithic hybrid ceramics on different substrates for bruxism.

OBJECTIVES: To determine the minimum thickness required for a monolithic hybrid ceramic crown on different substrates (soft vs stiff) used in posterior dentition for bruxism. METHODS: 80 polymer-infiltrated ceramic networks Vita Enamic (PICN VE) disc specimens with four different occlusal thicknesses (0.8, 1.2, 1.6 and 2.0 mm), were produced using a computer-aided design/manufacturing system, and cemented on a stiff (zirconia) or soft (polyamide) substrate of 4-mm thickness. The ten specimens, in soft or stiff groups, were subjected to compressive loading by a MTS machine until fracture or maximum load (4500 N) was reached. The unbroken specimens were examined using optical coherence tomography. Eight axisymmetric finite element models and eight 3D models comprising the four different occlusal thicknesses and two substrates under different vertical loads and sliding movements were constructed. The maximum principal stress was selected to evaluate the stress distribution in this study. RESULTS: The fracture resistance of the specimens was significantly different between the two substrates (P < 0.001). Fracture resistance was positively associated with specimen thickness (r = 0.597 and 0.896 for the soft and stiff substrate respectively). Specimens on the soft substrate had lower fracture loads, whilst cone cracks were observed in unbroken samples on different soft/stiff substrate prior to final fracture. The finite element analysis confirmed that samples on the stiff substrate had lower maximum principal stress values than those on the soft substrate. For the maximum principal stress not to exceed the flexural strength of PICN VE, a stiff substrate and minimum thickness of 2.0 mm are required for the prostheses. SIGNIFICANCE: A minimum 2.0 mm thick, stiff substrate was needed for bruxism as shown by the effect of high/large chewing force on the posterior dentition of monolithic PICN VE crowns.

The Use of Customized Three-Dimensionally Printed Mandible Prostheses with a Pressure-Reducing Device: A Finite Element Analysis in Different Chewing Positions, Biomechanical Testing, and In Vivo Animal Study Using Lanyu Pigs.

Segmental bony defects of the mandible constitute a complete loss of the regional part of the mandible. Although several types of customized three-dimension-printed mandible prostheses (CMPs) have been developed, this technique has yet to be widely used. We used CMP with a pressure-reducing device (PRD) to investigate its clinical applicability. First, we used the finite element analysis (FEA). We designed four models of CMP (P1 to P4), and the result showed that CMP with posterior PRD deployment (P4 group) had the maximum total deformation in the protrusion and right excursion positions, and in clenching and left excursion positions, posterior screws had the minimum von Mises stress. Second, the P4 CMP-PRD was produced using LaserCUSING from titanium alloy (Ti-6Al-4V). The fracture test result revealed that the maximum static pressure that could be withstood was 189 N, and a fatigue test was conducted for 5,000,000 cycles. Third, animal study was conducted on five male 4-month-old Lanyu pigs. Four animals completed the experiment. Two animals had CMP exposure in the oral cavity, but there was no significant inflammation, and one animal had a rear wing fracture. According to a CT scan, the lingual cortex of the mandible crawled along the CMP surface, and a bony front-to-back connection was noted in one animal. A histological examination indicated that CMP was significantly less reactive than control materials (p = 0.0170). Adequate PRD deployment in CMP may solve a challenge associated with CMP, thus promoting its use in clinical practice.

Investigation of the Effectiveness of Surgical Treatment on Maxillary Medication-Related Osteonecrosis of the Jaw: A Literature Review.

AIM: Medication-related osteonecrosis of the jaw (MRONJ) occurs after exposure to medication (antiresorptive or antiangiogenic agents) for bone-related complications. It is more common in the mandible than in the maxilla. The present study investigated maxillary MRONJ in elderly patients through a meta-analysis. METHODS: Keywords, including "MRONJ", "maxilla", and "surgery", were entered into databases, including Embase, PubMed/MEDLINE, Cochrane Library, and ProQuest, which were searched systematically. RESULTS: Investigating 77 studies, we found that 18 (2 case reports and 16 case series) papers conformed to the standards. The results revealed a 2.6:1 female-to-male ratio of disease occurrence. The average age of patients was 70.6 ± 5.5 years, and most patients were in the third stage (43.6%). The average time of medication usage was 50.0 ± 20.1 months. The pooled proportion of clinical efficacy of surgery was 86%. CONCLUSION: To prevent and manage MRONJ, all elderly patients should maintain proper oral hygiene and receive dental examinations regularly. Risk assessment and safety management of MRONJ should be performed by medical teams.

The correlation between surgical reference points: antilingula, lingula, and mandibular foramen.

The purpose of the present study was to investigate and determine the anatomical relationship between the antilingula, lingula, and mandibular foramen using cone-beam computed tomography (CBCT). METHODS: CBCT images of 90 participants (180 mandibular ramus) were collected. The locations of and distances between the antilingula, lingual, and mandibular foramen according to side (right and left) and skeletal patterns were measured and then evaluated by statistical analysis. RESULTS: Only 27 participants (15%) had bilateral distinct antilingula, lingula, and mandibular foramen. The antilingula was located anteriorly (4.28 mm and 3.59 mm) and above (1.99 mm and 8.52 mm) the lingula and mandibular foramen. The lingula was behind (0.69 mm) and above (6.53 mm) the mandibular foramen. Skeletal Class III was anterior and inferior to Class II and Class I in the antilingula, lingula, and mandibular foramen. Considering the correlations of landmarks, we found that the lingula was strongly correlated with the mandibular foramen on the X axis (r = 0.757) and Y-axis (r = 0.878). CONCLUSION: The antilingula is located anteriorly and above the lingula and mandibular foramen. The lingula is behind and above the mandibular foramen. The osteotomy line of orthognathic surgery can only be safely designed through actual measurement of the locations of the antilingula, lingula, and mandibular foramen.

The Effectiveness of a Board Game-Based Oral Hygiene Education Program on Oral Hygiene Knowledge and Plaque Index of Adults with Intellectual Disability: A Pilot Study.

An oral hygiene board game was designed as an intervention tool and applied to explore the effectiveness for the oral health related knowledge (OHK) score and plaque index (PI) of adults with intellectual disability (ID). This one-group pre/post-test design study was conducted in a residential long-term care facility for 42 participants. The study had one pre-test (baseline) and three post-tests evaluated in both control and intervention stages, respectively. The participants participated in a 60-min oral hygiene board game twice a week during the intervention stage. Total OHK score and PI of the participants were recorded to determine the effectiveness of intervention. There were no differences in OHK score and PI between the two stages at baseline. The results in intervention stage demonstrated a significant gradual increase and reduction in the OHK score when compared with the control stage. A statistically significant improvement in the OHK score and PI (42.29% and -33.28%, respectively) at the end of intervention between two stages was recorded. This study proved a board game is deemed an effective education method applicable to promote the OHK and skills of ID adults.